EverExceed Solar Panel for Blink Outdoor 4 (4th Gen) 2-Pack — 4W, 13.12 ft USB-C & 360° Adjustable Mounts

EverExceed's 4W solar panel kit keeps Blink Outdoor 4 (4th Gen) cameras charged outdoors with a long 13.12 ft USB-C cable, 360° adjustable mounts, and a weatherproof connector.

Designed specifically for Blink Outdoor 4 (4th Gen) cameras, this EverExceed dual-pack solar charger delivers continuous trickle power so your cameras run longer between battery swaps. The panels use monocrystalline cells and include an internal buffer battery to keep supplying power in low-light conditions. Installation is straightforward: attach the adjustable bracket, route the 13.12 ft cable, insert the waterproof plug into the camera port (after removing the camera battery), and angle the panel for best sun exposure.

How does this solar panel keep my Blink Outdoor 4 camera powered?

The EverExceed panel converts sunlight into electricity with higher-efficiency monocrystalline cells and stores energy briefly in an onboard buffer battery to maintain output during intermittent sun. Continuous trickle charging reduces how often you need to swap or recharge camera batteries.

• 4W rated solar output tuned for Blink Outdoor 4 cameras
• Built-in buffer battery sustains output on cloudy days
• USB-C output optimized for the camera charging port
• Pre-tested to provide steady low-current charging

Is it easy to install and position outside my home?

Yes—mounting is quick with the supplied 360° adjustable brackets and basic tools. The long 13.12 ft cable lets you position the panel for the best sun exposure while keeping the camera mounted where you need it.

• Includes two 360° adjustable wall-mount brackets
• 13.12 ft (4 m) USB-C cable for flexible placement
• Supplied screws and cable clips for tidy routing
• Angle the panel to maximize daily sun capture

Will this withstand rain and outdoor conditions?

The kit is built for outdoor use: the USB-C cable has a snug waterproof rubber plug to block water at the camera’s charging port, and the panel and mount are weather-resistant for typical exterior exposure. Routine checks on mounting hardware and the rubber seal help maintain performance.

• Waterproof rubber plug fits tightly into Blink camera port
• Weather-resistant panel housing for outdoor mounting
• Cable clips included to prevent strain and guide runoff
• Recommended to inspect seals seasonally

What should I know before connecting it to my camera?

Before plugging the solar panel into the Blink Outdoor 4 camera, remove the camera’s battery as advised to ensure correct initial connection. The kit includes two panels and all mounting hardware; follow the user manual for connector seating and bracket adjustments.

• Remove camera battery before first connection
• Two-panel pack supplies multiple cameras or spares
• Comes with user manual, screws, and cable clips
• Test panel orientation for maximum daylight charging

Who is this for: Homeowners and renters using Blink Outdoor 4 (4th Gen) cameras who want reduced maintenance and more consistent on-site power. This two-panel EverExceed kit is ideal for users wanting flexible placement thanks to the 13.12 ft cable, adjustable mounts for optimal sun angles, and weatherproof protection to keep outdoor cameras running longer between battery interventions.