Eden 2-Zone Mechanical Watering Timer — Faucet-Mounted Red/Grey, Dual 120-Minute Timers

The Eden 2-Zone Mechanical Watering Timer is a faucet-mounted device that runs two independent timed water circuits so you can automatically irrigate two different areas without watering by hand.

This compact, mechanical timer attaches to a standard outdoor faucet and controls two hoses or watering tools independently. It lets you set each zone for up to two hours, then shuts off automatically when the set interval ends. A manual on/off option gives you immediate faucet control when you need to hand-water, flush lines, or use a hose for cleaning. The straightforward dial design and durable plastic body make it a simple, low-tech solution for gardens, containers, vegetable beds, and soaker/drip systems.

How does the Eden timer manage two watering areas from one faucet?

The unit has two separate timer dials, each operating its own outlet, so you can run two different watering tools without swapping hoses. Each dial counts down independently and mechanically, turning the water off automatically when the chosen time finishes. This setup is especially handy for staggered watering schedules or different flow needs between lawn, planters, and drip lines.

• Two independent timers control separate outlets from a single faucet
• Each timer programmable up to 120 minutes
• Mechanical countdown—no batteries or Wi‑Fi required
• Suitable for sprinklers, soaker hoses, and low-pressure drip setups

Will this timer work with my drip or soaker hose system?

Yes—the Eden mechanical timer supports low-pressure watering tools such as drip and soaker hoses as well as standard sprinklers. Because the timer simply opens and closes the water flow, it is compatible with most systems that connect to a garden faucet. Confirm your hoses and fittings match standard threads for a secure, leak-free connection.

• Compatible with low-pressure drip and soaker hoses
• Connects to common faucet threads for broad compatibility
• Useful for mixed setups—sprinkler on one outlet, drip on the other
• No electrical components to worry about in wet conditions

How easy is it to set and use on busy mornings?

Setting the timer is quick: attach the unit, turn each dial to the desired duration (up to two hours), and you’re done. The mechanical dials are intuitive and visible at a glance, so you can check remaining run times without guesswork. For immediate needs, the manual on/off lever lets you bypass timers and use the faucet directly.

• Simple dial controls—fast to program before leaving
• Automatic shutoff prevents overwatering when you’re away
• Manual on/off lets you water on demand or rinse tools
• Sturdy plastic construction for outdoor convenience

What maintenance or care does this mechanical timer require?

Because it’s a mechanical device with no electronics, maintenance is minimal: rinse out debris from connections, check washers for a tight seal, and winterize by removing it from the faucet in freezing climates. Store indoors during cold months to extend service life and prevent cracked parts. Occasional inspection of hoses and fittings keeps water flow consistent and leak-free.

• Clean threads and check rubber washers periodically
• Remove and store indoors before freezing weather
• Inspect connections to prevent slow leaks or drips
• Replace worn washers to maintain a good seal

Who is this for: Gardeners, container growers, and homeowners who want a reliable, low-tech way to automate two watering lines from a single spigot will find the Eden 2-Zone Mechanical Watering Timer very useful. It’s ideal if you prefer a battery-free solution, have mixed watering needs (for example, a drip line and a sprinkler), or need a simple tool to save time while keeping flower beds and vegetable plots consistently watered.