Dunhil 24" Chainsaw Guide Bar & Twin Chains Kit — 24 in, 3/8" Pitch .050 Gauge, D009 Mount

This Dunhil kit includes a 24-inch guide bar plus two 24" replacement chains (3/8" pitch, .050 gauge, 84 drive links, D009 mount) engineered to fit many Husqvarna saw models.

Replace worn cutting components with a full Dunhil 24" chainsaw bar and twin chains set. The kit is built to the common D009 tail mount standard and sized for 3/8" pitch, .050 gauge chain with 84 drive links, making it suitable for numerous Husqvarna models when the guide plate and mounting spacing match. Before purchasing, confirm your saw's guide plate dimensions and 30 mm (1.18 in) mounting hole spacing to ensure compatibility.

Which saw models will accept this 24" Dunhil bar and chains?

The kit is intended for a wide range of Husqvarna chainsaws across older and newer lines. It lists many compatible model numbers, but compatibility depends on the saw's guide plate and tail-mount spacing. Measure your saw and compare with the product photos and specs to be sure.

• Designed for D009 tail-mount applications.
• Check 1.18 in / 30 mm mounting hole spacing before ordering.
• Not compatible with STIHL saws—confirm your brand and model first.

How do I know the chain dimensions match my saw?

Matching pitch, gauge and drive-link count is essential: this kit uses 3/8" pitch, .050 gauge, and 84 drive links. These three measurements must align with your saw's sprocket and guide plate specifications. If any of those differ, the chain won’t fit or operate safely.

• Pitch: 3/8" — measure tooth-to-tooth distance.
• Gauge: .050 — fits the guide bar groove width.
• Drive links: 84 — count links or compare to original chain length.

What should I check on the guide plate and mounting before installing?

Because guide plate dimensions vary across model years, inspect the saw’s tail mount and hole spacing. The Dunhil guide bar uses the D009 mount with 30 mm spacing between mounting holes. If your saw’s guide plate or hole pattern differs, the bar will not sit correctly and should not be forced into place.

• Verify D009 tail-mount shape matches your saw.
• Confirm 30 mm (1.18 in) mounting hole spacing with a ruler or caliper.
• Compare profile and hole positions with photos before purchase.

What comes in the package and how is it installed?

The kit ships with two 24" replacement chains and one 24" guide bar, giving you an immediate spare chain for continued work. Installation follows standard chainsaw procedures: remove the old bar and chain, fit the new bar, loop the chain over the sprocket and along the bar, and adjust tension to the manufacturer's specification. Always use proper hand and eye protection and follow safe-chain-tensioning steps.

• Package includes: 2x 24" chains + 1x 24" Dunhil guide bar.
• Follow your saw manufacturer’s instructions for chain installation and tensioning.
• Use appropriate PPE and ensure the saw is disconnected from power before work.

Who is this for: This Dunhil 24" guide bar and twin-chain kit is aimed at forest workers, arborists, landowners and experienced DIYers who need a replacement bar and spare chain for compatible Husqvarna saws. It’s ideal if your saw accepts a D009 tail mount and requires 3/8" pitch, .050 gauge, 84 drive links. If you’re unsure about fitment, measure your guide plate and mounting hole spacing before ordering to avoid returns.