Dreyoo Submersible Water Pump 1600 GPH 100W — 13 ft Lift, Filter Bags & Adapters

The Dreyoo 1600GPH 100W Submersible Water Pump is a compact, high-flow fountain and pond pump with filter bags and multiple fittings for easy setup and reliable circulation.

Built for backyard ponds, fountains and water features, this 100W submersible unit moves up to 1600 gallons per hour (about 6000 L/h) and lifts water to 13 feet. It includes two filter bags to reduce debris, several hose adapters, and simple mounting options so hobbyists and landscapers can install it under water quickly. The pump is IPX8-rated for waterproofing, has thermal protection, and runs quietly for everyday use.

How much water can this pump handle and what heads can it achieve?

The Dreyoo pump delivers up to 1600 GPH (approximately 6000 L/h) and can push water to a maximum vertical height of about 13 feet. That flow and head combination is appropriate for mid-size backyard ponds, pondless systems and medium water features.

• Maximum flow: 1600 GPH / ~6000 L/h
• Maximum lift (head): around 13 feet (4 meters)
• Suitable pond volume: roughly a 950-gallon pond for continuous circulation
• Power consumption: 100W for energy-efficient operation

What does the kit include and how do I install it?

The package arrives with the submersible pump and a set of connectors so you can match common fountain tubing sizes. Installation is straightforward: secure the included suction cups or rubber feet, fully submerge the pump, attach the desired adapter, and plug in. Flow is adjustable via a built-in control valve.

• Included: pump with 3-prong plug, two filter bags, straight and right-angle adapters
• Adapters: 1.18" right-angle, straight 1.18", 0.78", and 0.59"
• Mounting: suction cups or rubber feet to stabilize on pond floor
• Operation: plug in to start; use control valve to reduce or increase flow

How does the pump protect itself and reduce maintenance?

The Dreyoo pump includes thermal protection and an IPX8 waterproof rating to minimize risk of motor damage. Two filter bags trap leaves and large particles, protecting the impeller and extending service intervals. If the unit becomes exposed due to low water, its automatic protection will stop operation until properly submerged again.

• IPX8 waterproofing for continuous submersion
• Built-in overheating/thermal cut-off for motor safety
• Two filter bags remove larger debris and plankton
• Automatic shut-off if pump is not fully submerged

What noise and energy performance can I expect?

Running on 100 watts, this pump balances strong flow with relatively low energy use compared with larger pond pumps. The motor and housing are designed to operate quietly, making the unit suitable for front- and back-yard features where low sound is preferred. No oils are used, and wiring is insulated for safe submerged operation.

• Power draw: 100W for efficient circulation
• Designed for low operational noise
• No oil-based lubrication—clean water operation
• Safe electrical design for submerged use

Who is this pump for? Landscapers, homeowners and hobbyists who need a dependable mid-capacity submersible pump for ponds, fountains or pondless systems will find the Dreyoo 1600GPH 100W model a solid match. It’s especially useful when you want a compact unit with multiple fitting options, basic debris protection, and straightforward setup. Avoid dry-run conditions, keep the inlet clear of silt and large debris, and the pump will provide reliable circulation and fountain performance for small-to-medium water features.