Danner Pondmaster Pond-Mag 950 GPH Magnetic-Drive Pond Pump — 3/4" Fittings, Submersible/Inline

The Danner Pondmaster Pond-Mag 950 GPH is a magnetic-drive water pump built for continuous, quiet circulation in small to mid-size ponds and water features.

The Pond-Mag line from Danner Manufacturing offers rugged, seal-free pumping using a magnet impeller and an epoxy-encased motor assembly to reduce maintenance and extend service life. Model 02720 delivers up to 950 gallons per hour and is certified to UL/ETL standards, making it a reliable option for fountains, biological filters, skimmers and recirculation loops. It ships with a rigid pre-filter, an 18-foot cord, and supports submerged or inline installation for flexible placement.

How much pond can the 950 GPH Pond-Mag handle?

The 950 GPH rating is a good fit for ponds roughly between 850 and 1,100 gallons when used for general circulation, filtration and moderate waterfall flows. Flow will vary with elevation change and plumbing restrictions, so match pump head and fittings to your setup. Check the performance curve for specific head vs. flow data when planning features.

• Nominal flow: 950 gallons per hour
• Ideal pond size: approximately 850–1,100 gallons
• Inlet/outlet: 3/4" FPT inlet, 3/4" MPT outlet
• Useful for pumps feeding filters, skimmers, small waterfalls

What makes the Pond-Mag design lower maintenance?

This pump uses a magnet-driven impeller assembly and an epoxy-encased power unit, eliminating traditional shaft seals that wear out. The ceramic shaft and magnetic coupling keep internal wear minimal and reduce leak risk, letting the unit run continuously. A rigid pre-filter helps protect the impeller from debris, lowering cleaning frequency.

• Magnet impeller assembly removes mechanical shaft seals
• Epoxy-encased motor protects electronics from moisture
• Ceramic shaft for durable, low-friction operation
• Included pre-filter reduces clogging and maintenance

Can I install this pump submerged or inline?

The Pond-Mag 950 is engineered for both submerged and inline installations, offering versatility for different layouts. Submersed use is common for pond bottoms and skimmers, while inline placement suits protected, dry utility areas. Always ensure proper suction, check for air leaks in inline runs, and position the pre-filter where it can be accessed for cleaning.

• Operates submerged for direct pond circulation
• Supports inline installation for sheltered mechanical setups
• 18' cord for flexible positioning and routing
• 3/4" fittings match common pond plumbing sizes

What are the electrical specs and warranty coverage?

The pump runs on 120V/60Hz power and draws up to 1.33 amps (maximum 93 watts). Danner certifies this model to UL/ETL safety standards and backs it with a 5-year limited warranty, giving buyers protection against manufacturing defects under normal use. Follow recommended installation and maintenance practices to preserve warranty coverage.

• Voltage: 120 V / 60 Hz
• Max watts/amps: 93 W / 1.33 A
• Cord length: 18 feet for remote connections
• 5-year limited warranty from Danner Manufacturing

Who is this for: The Danner Pondmaster Pond-Mag 950 GPH pump is aimed at pond owners, landscapers and waterfeature installers who need a dependable, low-maintenance circulator for small to mid-sized ponds, skimmers or filter systems. It suits applications that require continuous operation with minimal upkeep, those converting existing setups to a seal-free magnetic drive, and anyone looking for a UL/ETL-certified pump with a solid warranty. If you need higher flow for larger waterfalls or very large ponds, consider larger Pond-Mag models in the 1800–3600 GPH range.