CIPU 1/4 HP Above-Ground Pool Pump 2220 GPH, 115V Self-Priming with 1-1/4" & 1-1/2" Hose Adapters

If your above-ground pool circulation has slowed or the original pump failed, this CIPU unit offers a straightforward swap-in solution. It runs on standard 115V household power, includes two common hose adapters, and delivers a moderate flow and head for everyday filtration and water movement. The compact footprint fits many small-to-medium pool setups and is intended for routine circulation, not specialty spa or commercial use.

How much water does this pump move and what head can it handle?

This pump is specified to move up to 2,220 gallons per hour (about 37 gallons per minute) at low head, and it maintains performance up to a 22-foot maximum head. Actual flow depends on your plumbing layout, filter resistance and fittings; longer hoses or dirty filters reduce output. It's optimized for standard above-ground pool plumbing rather than long or complex piping runs.

• Rated maximum flow: 2,220 GPH / 37 GPM
• Maximum head: 22 feet
• Flow varies with hose length, filter condition and valves

Will it replace my existing above-ground pool pump easily?

The CIPU pump is built as a replacement option for many above-ground filter systems, including sand filters, and comes with two hose adapters to match common inlet/outlet sizes. Before buying, measure your hose diameters, check the motor voltage (115V) and confirm the inlet/outlet orientation on your filter. Swapping typically requires basic hand tools and standard pool hose clamps.

• Includes adapters for 1-1/4" and 1-1/2" hoses
• 115V corded motor compatible with household outlets
• Check inlet/outlet positions and hose clamps before installation

What electrical and installation details should I know?

The motor runs on 115V / 60Hz with a 2.5A rated current, so no special wiring is required for most homes. The unit is self-priming, which simplifies startup after refilling or seasonal setup, but priming instructions in the manual should still be followed. Make sure the pump is mounted on a level, vibration-damped surface and that cords and connections stay dry and protected.

• Voltage: 115V / 60Hz; current rating: 2.5A
• Self-priming design for easier startup
• Mount on a stable, sheltered base and keep electricals dry

What maintenance and compatibility checks matter before purchase?

Regularly cleaning the pump strainer and keeping the filter backwashed or replaced preserves flow and extends motor life. Confirm compatibility with your pool type—frame or soft-sided pools and many sand filters are supported—but verify hose diameter, direction of flow, and filter port spacing. Replace worn clamps, gaskets or hoses to avoid leaks and ensure optimal performance.

• Clean strainer basket and monitor filter pressure
• Verify hose size, inlet/outlet direction and filter compatibility
• Replace aged hoses, clamps and seals during installation

Who is this for: The CIPU 1/4 HP pump is aimed at homeowners with above-ground pools who need an affordable, compact replacement pump for routine circulation—especially owners of small-to-medium frame or soft-sided pools and common sand filter systems. It suits seasonal pools and DIY installers who want a straightforward swap with included hose adapters, standard 115V power, and moderate flow suitable for everyday filtration tasks.