Byane 16" Carbide-Tipped Chainsaw Chain for 3/8"LP Bars, .043" Gauge, 56 DL — Long-Lasting Abrasion Resistance

BYANE's 16-inch carbide-tipped chainsaw chain is a heavy-duty replacement chain built for 3/8" low-profile bars with .043" gauge and 56 drive links, engineered to cut abrasive, dirty, and frozen wood far longer than conventional steel chains.

When you need a chainsaw chain that keeps cutting through tough, contaminated wood without frequent resharpening, this BYANE carbide chain is designed for that job. It pairs precision-brazed carbide tips with hardened rivets and chrome-plated leads to resist wear, lower downtime, and extend service life on demanding cordless platforms. Before ordering, confirm your bar size, drive link count (56 DL), and .043" gauge to ensure an exact fit and safe operation.

How does this chain stand up to abrasive or dirty wood?

This chain uses carbide-tipped cutters that are far harder than standard steel teeth, so they retain a sharper profile through sand, frozen grit, and debris-laden logs. The carbide material resists edge dulling, reducing the frequency of touch-ups and replacements under tough conditions.

• Precision-brazed carbide tips for prolonged sharpness
• Japanese chrome-plated lead links for corrosion and wear resistance
• Hardened rivets maintain link stability under heavy loads

What sharpening tools and maintenance does a carbide chain require?

Carbide cutters are extremely hard and must be sharpened with a diamond-coated sharpener rather than a conventional round file. Using inappropriate tools can damage the carbide edges or produce poor cutting geometry, so follow BYANE's maintenance recommendations for best results.

• Use 11/64" (4.5 mm) diamond-coated sharpener only
• Do not use standard steel files on carbide tips
• Inspect for chips after any contact with hidden metal or rock

Which saw models and OEM parts is this chain compatible with?

This 56-drive-link, 3/8"LP pitch, .043" gauge chain is made to replace or upgrade many high-voltage cordless saws and select OEM chains. It fits a range of platforms that accept 16" guide bars with the specified pitch and gauge.

• Compatible with Milwaukee M18 FUEL models (2727-20/21HD)
• Fits DeWalt 60V FlexVolt saws (DCCS670, DCCS690) and similar OEM numbers
• Also suitable for EGO Power+ CS1600/CS1611/CS1613 and selected Makita models

Are there any safety or use limitations I should know about?

Yes — tungsten carbide is very hard but also brittle. The chain is intended for wood cutting only; impacts with metal, rocks, or embedded nails can chip or shatter the carbide tips. Proper use and inspection avoid unexpected failures and keep operators safer.

• Avoid cutting through nails, wire, fencing, or stone
• Stop and inspect the chain if metal contact occurs
• Follow bar and chain tensioning and lubrication guidelines

Who is this for: This BYANE carbide chainsaw chain is aimed at professional arborists, land-clearing crews, and demanding DIYers who work with contaminated, frozen, or gritty timber and need a long-lasting replacement that reduces downtime. If you operate compatible high-voltage cordless saws and require extended cutting performance between maintenance intervals — and are prepared to use a diamond-coated sharpener — this chain offers a cost-effective, heavy-duty alternative to standard steel and many OEM options.