budrash 8-inch Rear Drive Wheels for Husqvarna & Craftsman Mowers — 2 Pack, 36-Tooth Metal Gear

These are a pair of 8-inch rear drive wheels with 36-tooth metal gears, built to replace Husqvarna part numbers 580365301 and 593198101 and fit several HU-series and Craftsman GCV-160 walk-behind mowers.

If your mower’s rear-drive wheels are worn, cracked, or no longer engaging the gearbox, swapping in a fresh set restores traction and allows the self-propel function to perform properly. The budrash replacement wheels are designed to match the factory specifications for diameter, hub offset and bore so installation is straightforward for most common mower models listed below.

Which mower models will these drive wheels fit?

These wheels are made to be compatible with a range of Husqvarna and Craftsman walk-behind mowers that originally used OEM parts 580365301 or 593198101. Always cross-check the wheel dimensions and the OEM reference from your machine before ordering.

• Compatible Husqvarna models: HU675AWD, HU700AWD, HU725AWD, HU800AWD, HU625AWD, HU775AWD and related L/LC series like L321AH, LC221A, L221AK, LC356AWD.
• Also fits Craftsman models using the GCV-160 engine application when the original wheel matches the listed specs.
• Replaces OEM numbers 580365301 and 593198101 and several equivalent part references listed on manufacturer documentation.

How do I verify these wheels will physically fit my mower?

Measure the existing wheel and compare key dimensions: overall diameter, tread width, hub offset and bore size. If your wheel matches the listed measurements, these replacements should install without modification.

• Wheel diameter: 8 inches; tread width: 2 inches.
• Hub offset: 1-3/8 inches; center bore: 1/2 inch.
• Confirm your mower’s OEM part number or inspect the worn wheel to compare teeth count and mounting style.

What tools and steps are required for installation?

Installation is intentionally simple and can typically be completed with basic hand tools. Each wheel uses a 36-tooth metal drive gear that meshes with the mower’s transmission; replacing them usually involves removing the axle nut, swapping the wheel, and retightening to factory torque.

• Common tools: wrench or socket set sized to the axle nut and possibly pliers for retaining clips.
• Procedure: lift and secure the mower, remove the axle nut, pull off the old wheel, slide on the new wheel, and reinstall the nut to secure.
• If you encounter resistance or poor gear engagement, recheck alignment and ensure the gear teeth are clean and undamaged.

What are the wheel’s durability and performance features?

Each wheel pairs a metal 36-tooth internal gear with a durable tread to balance longevity and traction. The design supports standard lawn surfaces and restores the drive function to original specifications when fitted correctly.

• 36-tooth metal gear for reliable engagement with the mower transmission.
• Robust tread pattern for improved grip on grass and uneven terrain.
• Sold as a two-wheel pack to replace both rear drive wheels and maintain balanced performance.

Who is this for? These budrash replacement rear drive wheels are intended for homeowners, landscapers, and maintenance technicians who need a cost-effective, OEM-compatible spare for Husqvarna HU-series and certain Craftsman mowers. They suit anyone comfortable performing basic mower maintenance who wants to restore self-propel function quickly using parts matched to factory dimensions and part numbers.