Briggs & Stratton Pressure Washer Hose 1/4-inch x 25 ft OEM replacement, durable factory-fit

The Briggs & Stratton 1/4" x 25' Pressure Washer Hose (part 196006GS) is a genuine OEM replacement hose built to restore pressure washer reach and performance for compatible Briggs & Stratton units.

This is an original-equipment Briggs & Stratton pressure washer hose sized at 1/4 inch inner diameter and 25 feet long, designed to replace worn or damaged hoses on many pressure washer models. Made as a factory part, it keeps replacement simple by matching the original specifications for fit, pressure handling and connection types. Choosing an OEM hose reduces the risk of leaks, loose fittings or compatibility problems that can arise with generic alternatives.

Will this hose fit my Briggs & Stratton pressure washer?

The 196006GS is intended as a direct replacement for Briggs & Stratton pressure washers that originally used a 1/4" x 25' hose. Check your model's parts list or the hose size on your existing hose to confirm compatibility. If your machine uses different diameter fittings or a longer/shorter hose, this part number may not match.

• Part number: 196006GS — factory OEM reference
• Dimensions: 1/4" inner diameter, 25 feet length
• Designed for Briggs & Stratton pressure washer models that list 1/4" hose
• Compare connector ends to your existing hose for exact fit

How durable and safe is this pressure washer hose?

As a genuine Briggs & Stratton part, the hose is manufactured to tolerate typical pressure washer operating pressures and routine outdoor use. It is built to resist abrasion and kinking under normal conditions, but lifespan depends on storage, water quality, and exposure to chemicals or extreme temperatures. Replace the hose if you notice bulges, soft spots, persistent leaks or damaged fittings.

• OEM construction matches original strength and rated pressure
• Resists wear from standard outdoor use and handling
• Avoid chemical exposures that the manufacturer does not recommend
• Inspect regularly and replace if damage or leaks appear

What connections and installations are involved?

Installation is straightforward for users familiar with pressure washer maintenance: detach the old hose at the wand and pump connections, and attach the new hose with the supplied or existing fittings. Use thread sealant or backup washers where recommended by your pressure washer manual to prevent leaks. If you’re unsure, consult an authorized Briggs & Stratton service center for guidance on proper attachment and torque.

• Disconnect machine power and relieve any pressure before swapping hoses
• Match fittings at wand and pump before tightening
• Use appropriate washers or thread sealant per manual
• Test at low pressure after install, then check for leaks under normal use

Why choose the OEM Briggs & Stratton hose instead of a generic replacement?

OEM parts are manufactured to the original specifications, which reduces the chance of mismatched fittings or premature failure. A genuine Briggs & Stratton hose typically delivers the reliability and fitment expected when restoring a machine to factory configuration. For long-term operation and warranty considerations, many owners prefer OEM components.

• Exact match to original part number 196006GS
• Consistent dimensions and connector compatibility
• Reduced risk of leaks, improper pressure handling or fit issues
• Supports straightforward maintenance and parts tracking

Who is this for: The Briggs & Stratton 1/4" x 25' Pressure Washer Hose 196006GS is intended for homeowners, landscapers and small-business users who own a Briggs & Stratton pressure washer that requires a 1/4" inner-diameter, 25-foot hose. It’s appropriate for anyone restoring a unit with an original-equipment replacement to ensure the right fit and reliable performance, and for service technicians who prefer factory parts for repairs.