Boltigen Pool Pump Replacement Hoses 2-Pack 1.25" x 63" with Clamps — Flexible UV-Resistant for Above-Ground Pools

If your above-ground pool pump or filter is leaking, kinked, or underperforming, replacing the hose is an inexpensive, fast way to get circulation back to normal. These Boltigen hoses come as a pair, each with a 1.25-inch internal diameter and 63-inch length, and include matching clamps so you can swap them into compatible systems without needing specialty fittings. Constructed from a durable, flexible material formulated to resist UV, abrasion and common pool chemicals, the hoses are intended for routine filtration, cleaning, and drainage tasks.

Will these hoses fit my above-ground pool pump and filter?

These hoses are designed for standard 1.25-inch (1-1/4") connections and a 63-inch length, matching many above-ground pump and filter setups. They work with common mid-range pump flow ratings and specified pump models, but confirm your pump’s inlet/outlet size before ordering.

• Inner diameter: 1.25 inches (1-1/4").
• Length per hose: 63 inches.
• Compatible pump flows: typical use with 330, 530 and 1000 GPH pumps.
• Works with pump models such as #607 and #637 when connector sizes match.

How do I install the Boltigen replacement hoses?

Installation is straightforward: slide the hose over the pump or filter connection, position the supplied clamp, then tighten for a snug, leak-resistant seal. Additional brackets or cable ties can be used to secure the hose routing and reduce strain on fittings for longer life.

• Includes matching hose clamps for secure connections.
• Simple push-on fit for standard barbed or threaded fittings.
• Use brackets, tape, or cable ties to prevent sagging and kinks.
• No special tools required beyond a screwdriver for the clamps.

What durability and performance can I expect from these hoses?

Boltigen hoses are made from flexible materials engineered to resist common outdoor stresses so they keep performing in pool environments. Their construction supports steady water flow and suction for filtration and cleaning tasks while resisting wear from sun exposure and pool chemicals.

• Flexible yet abrasion-resistant for reliable routing around equipment.
• UV-resistant material to avoid premature cracking or brittleness.
• Chemical-tolerant to typical pool sanitizers and cleaners.
• Tight-sealing clamps reduce leaks and maintain suction efficiency.

Can these hoses be used for other drainage or cleaning tasks?

Yes—beyond pool filtration, the hoses are suitable for general drainage and suction applications where the size and material match the task. They can serve as temporary or permanent lines for washing machine drainage, sewage suction, or other water transfer jobs in non-pressurized systems.

• Applicable for washing machine drainage and non-pressurized water transfer.
• Useful for pool cleaning tools and temporary siphon setups.
• Not recommended for high-pressure pump systems without proper fittings.
• Two-hose pack allows spares or multiple routing options.

Who is this for: Pool owners and maintenance technicians with above-ground systems seeking a low-cost, easy-to-install replacement hose. If you have a pump or filter that uses 1.25" connections and you want durable, UV- and chemical-resistant tubing with clamps included, this Boltigen 2-pack gives two ready-to-fit lengths so you can replace worn lines or keep a spare on hand for seasonal maintenance.