Besitu 36-inch Rebar Stakes 16-Pack — 3/8" Diameter Steel, Chisel-Point, Black Coated for Concrete, Fencing & Tree Anchoring

These are 36-inch, 3/8" diameter Besitu rebar stakes sold in a 16-pack for anchoring concrete forms, landscape timbers, fencing, trees and garden supports.

If you need long, heavy-duty metal stakes that penetrate tough soil and hold structures in place, the Besitu 36-inch rebar stakes give you a simple, durable anchoring solution. Each stake measures three feet long and is made from steel with a protective coating, featuring a chisel point on one end for easier driving. They’re intended for outdoor construction, landscaping and general-purpose anchoring where a long, straight stake is required.

How do these stakes perform when driving into hard or root-filled soil?

The Besitu stakes use a pointed chisel end designed to split soil and slide past small roots more easily than blunt rods. Their 3/8" diameter balances strength and driveability so you can install them with a sledgehammer or stake driver without frequent bending.

• 3/8" (10 mm) diameter for stiffness without excessive weight
• Chisel-point tip eases penetration in compacted or loamy soils
• Three-foot length reaches deeper strata for improved holding power
• Black coated finish reduces corrosion and surface wear

What construction and landscaping tasks are these best suited for?

These rebar stakes are made for a broad range of anchoring jobs: securing concrete forms, holding landscape timbers, anchoring fencing, or supporting plants and young trees. Their length and rigidity make them especially useful when standard short garden stakes won’t provide enough grip.

• Concrete formwork tie-downs and rebar trapping
• Securing landscape timbers, pavers and edging
• Fence posts, temporary barriers, and survey markers
• Supporting trees, shrubs, and heavy plant shelters

How long will these stakes last outdoors and how are they protected from rust?

The Besitu stakes are manufactured from mild steel and then given a dark protective coating to slow surface corrosion under typical outdoor use. While not stainless, the finish improves durability for seasonal use and many outdoor projects; for permanent coastal installs consider additional protective measures.

• Recycled mild steel construction for strength and weldability
• Black protective coating reduces exposure to moisture and rust
• Suitable for many seasons of outdoor use in non-corrosive sites
• For long-term salt-air exposure, extra galvanization or painting can extend life

What tools and installation tips help get the best results?

Use a heavy hammer, stake driver, or a piece of scrap timber over the stake head to reduce mushrooming when driving into the ground. Start with an angled tap to set the chisel point, then drive straight down. For very hard ground, pre-drill a pilot hole or use a ground auger to loosen soil first.

• Sledgehammer or commercial stake driver recommended for full-depth installation
• Use a block of wood as a cap to protect the stake head when hammering
• Pre-drill in compacted or rocky soils to ease installation
• Check vertical alignment and spacing before final tamping

Who this product is for: Contractors, landscapers, surveyors, and homeowners who need long, dependable metal stakes for medium-duty anchoring tasks will find these Besitu 36-inch rebar stakes useful. If you install concrete forms, build or repair landscape timbers, stake down fencing, or anchor trees and plant supports, the length and strength of these stakes provide greater holding capacity than shorter garden stakes. Each set includes 16 stakes and comes with a two-year warranty backed by Besitu’s customer support for replacements or assistance.