Besitu 16-Inch Rebar Stakes — 34-Pack 3/8" Steel Ground Anchors, Chisel Point, Black Powder Coat

These are 16-inch, 3/8" diameter heavy-duty steel rebar stakes sold in a 34-piece pack, built with a chisel point and black powder coat for long-lasting ground anchoring in landscaping, concrete formwork, and tent or plant support.

Besitu 16-inch rebar stakes provide a simple, durable solution when you need strong ground anchors that are easy to drive and hold firm. Each spike is 3/8" (10.0mm) thick, features a tapered chisel point for easier penetration into compacted soil or gravel, and is finished in a black powder coat to slow corrosion and extend service life. The 34-piece bundle gives you enough anchors for medium to large projects like edging, timber retention, staking down posts, or tent and equipment anchoring.

How well do these stakes drive into hard or rocky ground?

The chisel point tip and 3/8" steel core make these stakes easier to seat in firm soils and through small gravel than blunt-ended spikes. You can hammer them in with a sledge, post driver, or mallet; the sturdy shaft resists bending under impact.

• Chisel point for concentrated impact and cleaner penetration
• 3/8" (10.0mm) thick steel to resist deformation
• Suitable for compacted soil, lawn, and moderate gravel
• Drive with a post driver, sledge, or heavy mallet

What applications are these rebar stakes best suited for?

These anchors are multi-purpose: they secure landscape timbers, hold down concrete forms or blocks, provide reliable plant and tree staking, and anchor tents or temporary structures. Their length and strength make them useful for jobs where standard short stakes would pull out or bend.

• Landscape timbers and edging restraint
• Concrete form and block stabilization
• Tree, shrub, and vine support stakes
• Tent, canopy, and equipment anchoring

How durable are the Besitu stakes in outdoor conditions?

The stakes are constructed from malleable steel and finished with a black powder coat to slow surface oxidation and wear. While no coating is fully permanent, this finish increases lifespan in wet or damp soils compared with bare steel and helps maintain structural integrity over time.

• Malleable steel core balances toughness and bend resistance
• Black powder coating improves corrosion resistance
• Designed for repeated driving and moderate outdoor exposure
• 34-piece pack supports multiple-year projects or replacements

What size and quantity are included, and how do I choose the right number?

Each set contains 34 stakes, each 16 inches long with a 3/8" (10.0mm) diameter. Estimate the number you need by spacing requirements: closer spacing increases holding power, while longer timbers or heavier loads need more anchors per run.

• Pack: 34 pieces — ready for medium-to-large projects
• Length: 16 inches for deeper hold and better leverage
• Diameter: 3/8" (10.0mm) for heavy-duty applications
• Recommend spacing: 12–24 inches depending on load and soil

Who is this for? The Besitu 16" rebar stakes suit landscapers, contractors, and DIYers who need reliable, budget-friendly ground anchors for timber, concrete forms, plant staking, and temporary structures. If you require long, strong spikes that are easy to drive and come in a bulk quantity, this 34-pack gives you a practical mix of strength, length, and corrosion-resistant finishing for a wide range of outdoor projects. Contact Besitu with any product questions or warranty needs.