ASAHOM Power Injection T-Connector with S1080 Power Supply, White — Outdoor kit for S1080 RGBcw to prevent dimming

ASAHOM Power Injection T-Connector with S1080 Power Supply is an accessory that safely feeds extra power into ASAHOM S1080 RGBcw permanent outdoor light runs when a single adapter cannot support more than 144 LEDs.

When you install long runs or multiple segments of ASAHOM S1080 RGBcw outdoor lights, voltage drop and insufficient current become concerns. This kit includes the white T-shaped power injection connector and the matching S1080 power adapter so you can introduce an additional power source at a midpoint or branch. It’s designed exclusively for ASAHOM S1080 RGBcw permanent outdoor lights and helps keep brightness even and controllers stable across extended installations.

How does the T-connector prevent dimming on long light runs?

The T-connector lets you add a second S1080 power supply to sections of the strand that are beyond the first 144 LEDs, reducing voltage drop and restoring full brightness. It splits the power feed so the controller isn’t overloaded while maintaining correct signal flow for the LEDs.

• Insert the T-connector at the desired midpoint or branch point.
• Power each side with its own S1080 adapter—each adapter powers up to 144 LEDs.
• Keep connectors sealed and weatherproof for outdoor reliability.

Where and when should I add an extra power adapter?

Add another adapter whenever a contiguous run or combined branches exceed 144 LEDs, or when you notice reduced brightness at the far end of the lights. Use the T-connector to route the additional adapter so each adapter only supplies its designated LED count.

• Install before brightness drop becomes visible, typically after 144 LEDs.
• Use one adapter per 144-LED segment to avoid overloading a single power source.
• Do not plug two adapters into one controller port without the T-connector.

What compatibility and safety checks should I perform?

This product is compatible only with ASAHOM S1080 RGBcw permanent outdoor lights, so confirm your model before purchase. Follow the specified power limits, seal all outdoor connectors, and avoid connecting both adapters directly into the same controller port without the T‑connector to prevent damage.

• Verify the lighting model is S1080 RGBcw before connecting.
• Each S1080 adapter must not power more than 144 LEDs.
• Use appropriate outdoor-rated sealing methods on every connector for weather resistance.

How do I install the T-connector and power adapter safely?

Installation is straightforward but requires attention to cable routing and weatherproofing. Position the T-connector where you can easily access both the controller side and the additional adapter; tighten connections and use outdoor-rated sealant or heat-shrink boots for exposed joints.

• Cut power before making any connections and follow local electrical codes.
• Orient the T so the branch feeds the distant LEDs that need power reinforcement.
• Test segments individually after adding the adapter to confirm even brightness.

Who this is for: installers, landscapers, and homeowners extending ASAHOM S1080 RGBcw permanent outdoor lighting runs who need a reliable way to add a secondary power source. If you plan long runs, multiple branches, or want to maintain even light output across every LED, this T-connector and S1080 power supply pair provides a model-specific, weather-ready solution. Ensure you use only the correct ASAHOM S1080 adapters and follow outdoor sealing and safety practices for dependable performance.