Anbte Solar Panel Roof Mounting Kit — 7.87" Aluminium Rails & Clamps, Fits 30/35mm Frames, Corrosion-Resistant

The Anbte Solar Panel Roof Mounting Kit is a complete set of 7.87-inch aluminium rails, Z-brackets and two-hole end clamps engineered to fasten small to medium PV panels securely to a wide variety of roof types.

This kit supplies lightweight, corrosion-resistant aluminium rails plus stainless fasteners and EPDM rubber pads so you can mount solar panels on pitched or flat roofs, RVs and boats with minimal roof penetration. Designed for homeowners, van builders and marine installers, the system balances strength and low weight while offering flexible clamp orientation for 30 mm or 35 mm frame depths.

How does the kit attach solar panels to different roof materials?

The kit uses Z-type brackets and short aluminium rails that create a stable connection between the module frame and roof substrate while spreading loads to reduce stress on the roof covering. Pre-drilled holes and included fasteners let you adapt the kit for asphalt shingles, tile, standing seam, ceramic tiles and flat deck installations.

• Z-type brackets reduce direct panel weight on roof seabed and simplify mounting steps.
• EPDM rubber mats improve waterproofing at contact points and prevent abrasion.
• Included M8 screws, nuts and stainless steel hardware resist rust for outdoor use.

Will these clamps fit my panel frames and how do I switch sizes?

Anbte end clamps are engineered with two hole positions and come as paired long and short end pieces so you can select the correct orientation for your panel frame. Use the shorter side for 30 mm (1.18") frame depths and flip to the longer side for 35 mm (1.38") frames — no special parts required.

• Two-hole clamp design accepts 30 mm or 35 mm panel frame depths.
• Long and short end clamps included for quick configuration on site.
• Pre-drilled holes speed up alignment and reduce installation time.

What materials and hardware are included, and how do they hold up outdoors?

The rails and clamps are forged from aluminium alloy to keep weight low while offering high load capacity. The kit also includes 18 stainless steel screws, M8 fasteners and an EPDM rubber mat; these materials are selected to resist corrosion and maintain a weatherproof seal over time.

• 7.87" aluminium rails provide light but strong support for modules.
• Stainless steel screws and M8 bolts resist rust in coastal or humid environments.
• EPDM rubber mat protects roof covering and ensures long-term waterproofing.

How many panels or what size array can this kit support?

This kit is sized for small arrays, RV panels and residential installations using several compact modules. It includes six short rails and matching clamps and is intended for use with panels compatible with the rail length and clamp dimensions; for larger commercial arrays combine multiple kits or choose longer rail assemblies.

• Includes six 7.87" rails, six Z-brackets, six nuts and six M8 bolts for small arrays.
• Best for rooftop, RV or marine setups using compact solar modules.
• Modular design allows multiple kits to be joined for larger installations.

Who is this for: installers and DIYers who need a compact, corrosion-resistant mounting solution for small residential, RV or marine solar setups. If you want quick installation with flexible clamp sizing, EPDM sealing, and stainless fasteners for long-term outdoor durability, this kit provides the essential rails, clamps and hardware to secure panels reliably. For large commercial arrays, consider using multiple kits or longer rail systems to match panel layout and wind/snow loads specific to your site.