Anbte Solar Panel Mounting Kit 6PCS — 4.72 in Rails for Metal & RV Roofs, Aluminum Corrosion-Resistant

Anbte's 6PCS Solar Panel Mounting Kit is a complete aluminum-alloy rail and clamp system designed to securely mount two 30/35 mm framed solar panels on metal, tin, sheet, flat or RV roofs.

This compact kit gives installers a ready-to-fit solution: four short 4.72" rails, adjustable end clamps, T-shaped middle clamps, stainless steel hardware and EPDM rubber pads. Everything is sized to accept common 30 mm and 35 mm panel frames and to resist outdoor corrosion so panels stay stable without stressing the roof covering.

How does this kit make rooftop installation easier?

The rails are intentionally short and lightweight for simpler handling and positioning, and the T-shaped middle clamps plus Z-style end clamps allow quick clamping without special tools. Pre-drilled holes and grooved rail channels align panels and clamp hardware for repeatable, fast mounting.

• 4.72" rails reduce bending during placement and are easy to carry.
• Grooved rail channels secure clamp bolts and prevent slip during tightening.
• Z-shaped end clamps have two fixing holes for quick fit to 30/35 mm frames.
• Included EPDM rubber pads protect roof seals and prevent water intrusion.

Will these components hold up to weather and corrosion?

Yes — the kit uses aluminum alloy rails and 304 stainless-steel fasteners for long-term outdoor durability, resisting rust and most corrosive conditions encountered on roofs and RV exteriors. EPDM rubber pads provide an additional water-resistant barrier between metal parts and the roof.

• Aluminum alloy rails: lightweight with strong load capacity.
• 304 stainless-steel screws: corrosion-resistant and durable.
• EPDM rubber pads: UV- and weather-resistant sealing layer.
• Designed for outdoor exposure on metal, tin, and sheet roofs or RV mounts.

How adaptable is the kit to different panel frames and roof types?

The Z-shaped end clamps have two pre-drilled fixation holes and a dual-length profile so the same clamp fits either 30 mm or 35 mm panel frames. The kit’s short rails and available clamp placement let you mount panels on standing seam, metal, flat, sheet, tin, and RV-style roofs, assuming compatible roof fastening points or mounting brackets are used.

• Dual-length end clamps: choose short side for 30 mm frames, long side for 35 mm frames.
• Suitable for panel frame thickness: 30 mm / 35 mm.
• Works with metal roofs, tin roofs, sheet roofs, flat roofs and RV installations.
• Complete accessory set included for two-panel installations.

What comes in the box and what tools or extras might you need?

The kit supplies six short 4.72" rails, four end clamps, two middle T-clamps, matching stainless-steel fixing screws and EPDM rubber pads — enough hardware to mount two typical framed panels. You may need roof-specific flashings, seam clamps, or additional rails for non-standard roof mounting patterns and a basic wrench or Allen key set to tighten the fasteners.

• Included: 6 rails (4.72"), 4 end clamps, 2 middle clamps, screws, rubber pads.
• Supports installation of two solar panels with 30/35 mm frames.
• Recommended extras: roof-specific brackets, sealant or flashing depending on roof type.
• Required tools: wrench/Allen keys and a torque guideline for stainless fasteners.

Who is this for: Installers and DIYers fitting small photovoltaic arrays on metal, tin or sheet roofs, or owners mounting a pair of panels on an RV who want a corrosion-resistant, compact rail-and-clamp solution. This kit is best when you need a ready-packaged set for two panels and when panel frames match the 30/35 mm sizing; for larger arrays or specialty roof systems, combine this kit with roof-specific brackets or consult a mounting professional.