Amptyhub Polaris Feed Hose Replacement 32.8 ft for 280/380/180/3900 — Pre‑assembled Kit with Filter & Swivels

Amptyhub's replacement feed hose is a fully assembled, factory-style 32.8 ft feed hose kit designed to restore suction and movement to compatible Zodiac Polaris pool cleaners (not compatible with Polaris 360).

If your Polaris 280, 380, 180 or 3900 cleaner is pulling poorly, skipping sections, or the hose is split or leaking, this Amptyhub feed hose replacement is built to get your cleaner moving like new. The kit arrives pre-assembled and includes the soft leader hose and all essential connectors so installation is straightforward — no scavenging for missing parts.

What exactly is included in the Amptyhub feed hose kit?

The kit delivers a full-length feed hose assembly plus the fittings and spares you need for a single repair or refresh. Everything comes pre-attached where applicable so you can connect to your pool and Polaris unit quickly.

• 32.8 ft total hose length made of four 6.56 ft hose sections (including hose head)
• UWF (G5) feed hose completed and ready to install
• 1 backup valve (G52) and 1 inline filter (LS48-080)
• UWF connector assembly (9-100-9001), 11 feed hose nuts (D15)
• 3 ball-bearing swivels (D20) and 10 float heads (D10)

How do I install this replacement feed hose on my Polaris cleaner?

Installation is designed to be accessible for most pool owners with basic tools. Because the assembly ships pre-assembled, you mainly attach the hose to the pool’s return and the cleaner’s head, then secure the provided nuts and connectors.

• Shut off booster pump before disconnecting old hose
• Connect inline filter and back-up valve as shown in your cleaner manual
• Attach swivel and hose nuts firmly to avoid air leaks
• Reposition floats for proper buoyancy and test with pump on

Will this hose work with my Polaris model and what should I check first?

This feed hose is compatible with Zodiac Polaris 380, 280, 180 and 3900 cleaners. It is not compatible with Polaris 360, so confirm your cleaner model before purchasing. Also inspect your cleaner head and booster pump fittings to ensure the supplied connectors match the originals.

• Compatible: Polaris 380, 280, 180, 3900
• Not compatible: Polaris 360 — verify model label before ordering
• Check booster pump fittings and cleaner head for matching connector types
• Replace worn valves or swivels to prevent future suction loss

What maintenance or troubleshooting should I expect after installing the hose?

After installation, monitor the cleaner for consistent movement and suction. If the cleaner stalls or floats tumble, recheck connections for air leaks, confirm filter is clear, and adjust float heads to balance the hose.

• Inspect inline filter for debris and clean as needed
• Ensure backup valve seats tightly to maintain suction
• Adjust floats to avoid tangling or excessive lift
• Replace any damaged swivel or nut from the included spares

Who is this for: This Amptyhub feed hose replacement is suited for pool owners, maintenance pros, and repair technicians who want a complete, ready-to-install feed hose for Zodiac Polaris 280, 380, 180 and 3900 cleaners. Choose this kit if you need a factory-style swap that includes connectors, swivels, float heads, and spare parts to perform a single repair without sourcing additional components. Remember to confirm your cleaner model (not for Polaris 360) before ordering.