Adviace Charbroil Gas2Coal Replacement Kit — 3 Stainless Steel Burners, 3 Porcelain Heat Tents & 2 Adjustable Carry-Over Tubes

Adviace replacement kit restores Charbroil Gas2Coal 3- and 4-burner hybrid grills with three stainless-steel burners, three porcelain heat tents, and two adjustable carry-over tubes for reliable, like-new performance.

If rusted or damaged internal parts have left your Charbroil Gas2Coal grill underperforming, this Adviace repair kit supplies the common wear items needed to get it back into service. The set includes three 14-7/16" stainless-steel burners, three 14-1/2" porcelain-coated heat tents, and two telescoping carry-over tubes that extend from roughly 5" to 9". All components match the dimensions and original part numbers used in many Gas2Coal 3- and 4-burner hybrid models so you can replace corroded parts quickly and economically.

Which Charbroil models will these parts work with?

These components are sized for a range of Charbroil Gas2Coal 3- and 4-burner hybrid grills. They are intended as direct-replacement items for models that used the original G421-0500-W1 and G466-2500-W1 burners, G553-0002-W1A heat tents, and G432-0078-W1 carry-over tubes. Measure your existing parts to confirm fit before purchasing.

• Compatible 3-burner models include 463370519, 463370516, 463340516, 463336818, 463341918, 463370518.
• Compatible 4-burner models include 463278418 and 463278419.
• Compare burner length (14-7/16") and heat tent size (14-1/2" x 4-3/8") to your originals.

How do these replacement parts improve grill performance?

Replacing burned-out or rusty burners, bent heat tents, and clogged carry-over tubes restores even heat distribution and proper gas routing. New stainless-steel burners provide consistent flame, porcelain heat tents shield burners and convert drippings to smoke, and carry-over tubes direct the flame between combustion areas.

• Stainless-steel burners resist corrosion and deliver steady heat output.
• Porcelain-coated heat tents protect burners and promote smoky flavor from drippings.
• Adjustable carry-over tubes ensure proper flame transfer between burners.

Is installation difficult and what tools will I need?

Installation is straightforward for anyone comfortable with basic grill maintenance and hand tools. Most homeowners can swap the parts in 30–60 minutes; no special welding or advanced skills are required. Always turn off gas and disconnect the propane tank before starting work.

• Typical tools: socket set or wrench, screwdriver, gloves, and a wire brush for cleaning mount points.
• Follow original part orientations and secure burners to the manifold evenly.
• Inspect gas fittings and valves while reassembling; replace any damaged seals.

What are the exact dimensions and materials included?

The kit contains three burners (14-7/16" long by 1" diameter) made from stainless steel, three porcelain-steel heat tents measuring 14-1/2" x 4-3/8", and two stainless-steel carry-over tubes that telescope roughly between 5" and 9". These specifications mirror the originals used in many Charbroil Gas2Coal grills.

• Burners: 14-7/16" x 1", stainless steel for corrosion resistance.
• Heat tents: 14-1/2" x 4-3/8", porcelain-coated steel to vaporize drippings.
• Carry-over tubes: adjustable 5"–9" stainless-steel for correct flame transfer.

Who is this for: This Adviace kit is designed for Charbroil Gas2Coal owners who need to replace worn or rusted internal components without buying a new grill. It suits DIYers, backyard cooks who want to restore even heating and smoke behavior, and anyone maintaining older hybrid Gas2Coal 3- and 4-burner models. Remember to verify your grill’s part dimensions against the listed measurements to ensure a proper match before ordering.