Adam's Polishes Premium Foam Cannon — 32oz 1/4-inch Quick-Disconnect Foam Sprayer with Brass & Stainless Fittings

Adam's Polishes Premium Foam Cannon is a pressure-washer-mounted soap sprayer that produces thick, clinging foam to help safely loosen dirt on cars, wheels, and exterior surfaces.

If you want faster, gentler cleaning than hand-spraying or bucket washing, this foam cannon pairs with a pressure washer to turn car wash solution into a dense blanket of suds. Built with brass and stainless components and a 1/4" quick-disconnect fitting, it accepts Adam's bottles or bulk mixes and holds over 32 ounces for uninterrupted coverage. The result is extended dwell time for detergents and an easier rinse-off that reduces scrubbing and potential surface marring.

How does the foam cannon improve my car-washing routine?

The cannon lays down a consistent layer of foam that clings to paint and trims, suspending grit so it rinses away rather than being dragged across the surface. That reduces mechanical abrasion and cuts the time spent scrubbing. It’s especially useful before two-bucket or mitt work because it pre-lifts contaminants.

• Creates thick foam for longer chemical contact with dirt and grime
• Reduces the need for aggressive scrubbing and repeated passes
• Compatible with Adam's concentrates and standard foam solutions
• 32+ ounce reservoir for broader coverage per fill

What pressure-washers and fittings are supported?

The unit is designed to connect to pressure washers with a 1/4" quick-disconnect setup and includes stainless and brass fittings for durability. The universal nozzle interface accepts most foaming tips and Adam's threaded bottles, making it simple to swap between concentrated and pre-bottled mixes. Always follow your pressure-washer’s specs for safe operation.

• 1/4" stainless steel quick-disconnect compatible
• Brass and stainless metal fittings to resist corrosion
• Works with standard foam nozzles and Adam's bottles
• Requires a pressure washer — not a garden hose attachment

Can I adjust spray pattern and foam thickness?

Yes — the cannon has dual adjustable spray fans and a foaming nozzle to dial in the fan width and foam density. That lets you move from a narrow, targeted spray for wheels to a wide, thick foam for full-vehicle coverage. Adjustments are tool-free and quick, so you can change settings between vehicles or tasks.

• Dual adjustable spray fans for sweep control
• Nozzle tuning to increase or decrease foam output
• Fast conversion between concentrated and diluted mixes
• Simple, no-tools adjustments for on-the-fly changes

What maintenance and compatibility should I expect?

Keep the cannon working reliably by rinsing the bottle and nozzle after use and periodically checking seals and fittings. The brass and stainless parts reduce corrosion, but detergents left to dry can clog passages. Replacement seals and nozzles are commonly available if wear occurs.

• Rinse with clean water after each use to avoid buildup
• Inspect O-rings and fittings for wear and replace as needed
• Use recommended detergents to prevent damage to internal parts
• Store upright and protected from freezing temperatures

Who is this for? Detailers, DIY car care enthusiasts, and homeowners who want faster, safer exterior cleaning will benefit most. If you already use a pressure washer and want to cut washing time while protecting paint and trim, this foam cannon provides professional-style sudsing without complicated setup. It’s also a good fit for those who prefer working with concentrated solutions or Adam's ready-to-use bottles for convenience.