Acquaer 1/3 HP Automatic Pool Cover Pump – 2950 GPH, Automatic On/Off, 115V with Bottom-Suction and Thermal Protection

The Acquaer 1/3 HP Automatic Pool Cover Pump is a submersible, self-switching pump that clears standing water up to 2950 gallons per hour and shuts off automatically when the surface is nearly dry.

This compact, above-ground cover pump is designed to remove water from pool covers, tarps, spas, boat covers, window wells, rooftops and other low-depth areas without constant supervision. Its bottom-suction layout pulls water down close to the surface, while an integrated automatic switch and thermal protection reduce the chance of motor damage. The pump ships with a 25-foot cord, adapters and a three-year warranty for basic peace of mind.

How does the automatic on/off switch work?

The pump detects water and starts when water depth reaches about 2 inches, then keeps running until water is reduced to roughly 2/5 of an inch. After reaching the low level, it runs 60 seconds more to clear residual water and then stops, preventing unnecessary runtime. This eliminates the need for manual monitoring in most use cases.

• Automatic activation at ~2" water depth
• Runs an extra 60 seconds after reaching ~2/5"
• Reduces need for manual on/off control
• Ideal for unattended outdoor covers and low-depth drains

What drainage performance can I expect from this 1/3 HP pump?

With a maximum flow of up to 2,950 gallons per hour, the Acquaer cover pump moves large volumes quickly for its size, making it suitable for fast water removal from covers and shallow basins. The bottom-suction design pulls water down to roughly 3/4 inch, leaving minimal standing water behind. Performance will vary by discharge hose length and elevation.

• Maximum 2,950 GPH flow rating
• Bottom suction removes water to approximately 3/4" depth
• Flow affected by hose diameter, length and vertical lift
• Good for pool covers, hot tubs, tarps and rooftop puddles

What safety and durability features are built in?

The pump includes a removable strainer base to keep debris away from the impeller and stabilize the unit, plus a temperature control core that helps prevent motor damage if water runs low. The strainer is tool-free for easy cleaning, and a built-in check valve adapter reduces backflow when discharging with a garden hose. These features help extend the pump’s usable life and simplify maintenance.

• Tool-free removable strainer base for easy cleaning
• Thermal protection prevents dry-burn damage
• 3/4" garden-hose adapter with check valve included
• 1-1/4" NPT discharge for standard fittings

How will I power and set up the pump at my site?

The pump is compatible with standard 115V outlets and comes with a 25-foot three-prong power cord for flexible placement. It includes both a 1-1/4" NPT discharge and a 3/4" garden hose adapter so you can connect to common hoses or hard plumbing. A short manual guides basic hookup and troubleshooting, and Acquaer offers a three-year warranty with customer support.

• 25 ft grounded 115V power cord for flexible positioning
• Includes 3/4" check-valve adapter and manual
• 1-1/4" NPT discharge fits standard fittings
• Three-year warranty and customer service availability

Who is this for? The Acquaer 1/3 HP Automatic Pool Cover Pump is aimed at pool and spa owners, boat and RV owners, and property managers who need a reliable, low-maintenance way to clear shallow standing water quickly. It suits anyone wanting an automatic, bottom-suction solution with simple hookups and built-in protections—especially where unattended operation and debris management are important.