ACEBRI 13x5.00-6 Flat-Free Lawn Mower Tire & Wheel Assembly — Tubeless, 500 lb Load, Adapter Kit Included

ACEBRI’s 13x5.00-6 flat-free tire and wheel assembly is a heavy-duty, maintenance-friendly replacement wheel built to fit many zero-turn and riding lawn mowers while resisting flats and carrying up to 500 lbs per wheel.

This complete tire-and-wheel unit combines a solid, tubeless 13x5.00-6 tire with a one-piece welded hub and a set of adapters and bearings so you can swap front or caster wheels quickly. Designed for turf use rather than roadway travel, the assembly reduces downtime from punctures while delivering predictable steering and load support. Before ordering, verify hub dimensions and mounting spacings against your mower’s factory specs.

Will this ACEBRI wheel fit my zero-turn mower or riding lawn tractor?

Compatibility depends on tire diameter, hub bore, and hub length. This assembly is intended for machines that accept 13-inch diameter, roughly 5-inch-wide tires and a 3/4" bearing bore. Measure your axle, spacer requirements, and overall tire clearance to confirm a match.

• Tire size: 13x5.00-6; nominal tire diameter 12.92" and width 4.54"
• Bearing diameter / hub bore: 3/4" standard included
• Centered hub length: adjustable between approximately 3"–3.41" with supplied adapters
• Includes assorted bushings, bearings and metal washers for multiple mounting options

How durable is the tire and how much weight can each wheel carry?

The ACEBRI tire is engineered as a multi-ply, tubeless design for longer life on lawn surfaces and to resist common punctures. Each wheel has a dynamic rated load capacity of about 500 lbs and a maximum inflation-related pressure rating up to 30 psi when applicable for similar solid-style tires.

• 4-ply tubeless construction for longevity and cut resistance
• Deep tread pattern for traction and wear distribution on grass
• Welded hub assembly increases structural strength under load
• 500 lb dynamic load rating per wheel for typical residential and light commercial use

What mounting hardware and adjustments are included for installation?

The wheel ships with a selection of bearings, bushings, and thin metal washers so it can adapt to several axle configurations without extra purchases. The centered hub length is adjustable using the included adapter kit to help achieve correct wheel spacing and alignment during installation.

• Includes multiple bushings and 3/4" bearings for common axle bores
• Thin metal washers provided for fine-tuning lateral fit and preload
• Adapter pieces allow hub length adjustment between about 3" and 3.41"
• One-piece hub eliminates separate bearing press-fit steps for many installs

How should I care for these tires on my mower?

Because this is a flat-resistant, tubeless-style tire and wheel, routine care is simple: keep bearings lubricated, avoid sharp debris, and check for proper alignment and secure fasteners. Regular inspection of the hub assembly and replacement of worn bushings will keep steering smooth and extend service life.

• Maintain bearing lubrication for smooth rotation and reduced wear
• Inspect tread and sidewalls for cuts or embedded debris after each use
• Tighten mounting hardware to manufacturer torque specs during installation
• Store mower out of direct sun to reduce premature rubber aging

Who is this for: Owners of zero-turn mowers, riding lawn tractors, and garden tractors who need a dependable, flat-resistant front or caster wheel replacement that comes ready with the bearings and adapters required for many common axle setups. It’s best for residential and light commercial mowing where puncture resistance and simple installation matter more than highway or high-speed use.