8TEN 72-inch mower blade set for Bad Boy Outlaw — 3-Pack Notched High-Lift OEM-fit replacement

These are 8TEN LawnRAZOR notched high-lift replacement blades designed to fit Bad Boy 72" Outlaw decks (OEM 038-7230-00), sold as a 3-pack for full-deck replacement.

If your Bad Boy Outlaw 72" mower needs a complete blade refresh, this 3-pack of notched high-lift blades from 8TEN matches the OEM fit and cutting profile for efficient grass lift and clean clippings discharge. Each blade is engineered to the same critical dimensions—length, width, thickness and center hole diameter—so they install like factory parts and restore cutting performance for mowing, bagging, and side-discharge applications compatible with high-lift decks.

Which Bad Boy models and years will accept these blades?

These blades are engineered to fit a broad range of Bad Boy 72-inch decks and Outlaw model years. They match the OEM part number 038-7230-00 and are compatible with multiple Outlaw, Outlaw Extreme, Outlaw XP, Diesel, Rebel, Rogue and Renegade variations across model years listed by Bad Boy.

• Designed for Bad Boy 72" Decks (2007–2018 variants mentioned by model)
• Compatible with Outlaw, Outlaw Extreme, Outlaw XP and certain Diesel, Rebel, Rogue, Renegade models
• Meets OEM part reference 038-7230-00 for straightforward replacement

How do the blade dimensions affect cutting and fit?

Correct dimensions ensure proper blade balance, deck clearance and mower spindle compatibility. These 8TEN blades match the factory measurements so they sit at the right height and spin cleanly without rubbing the deck or causing vibration.

• Blade lift length: 24 1/8 inches for proper deck sweep and air flow
• Blade width: 2 1/2 inches for a stable cutting edge and discharge path
• Thickness: 0.236 inches for durability and reduced flex
• Center hole: 5/8 inch to fit standard Bad Boy spindles for these decks

What does 'notched high lift' mean for lawn performance?

Notched high-lift blades are shaped to pull grass upward into the cutting path and then forcefully move clippings through the deck chute or into the bagging system. The notches help create additional airflow for cleaner cutting and more effective mulch or collection, depending on deck setup.

• High-lift profile produces stronger suction for upright grass cutting
• Notches alter airflow to assist mulching and chute discharge
• Good choice for taller or denser turf where lift improves cut quality

How should I replace and care for these blades?

Replace all three blades at the same time to maintain balance and even cutting height across the deck. Inspect mounting hardware and spindles for wear, torque bolts to manufacturer specs, and sharpen or replace blades as needed to keep performance consistent.

• Install all three blades together to prevent vibration and uneven wear
• Check blade orientation and torque per Bad Boy service manual
• Clean and inspect blades after heavy use; sharpen or replace if nicked

Who is this for: This 8TEN LawnRAZOR 3-pack is intended for owners or service technicians of Bad Boy 72" Outlaw and compatible models who need OEM-compatible, notched high-lift replacement blades. It suits those who want a direct-fit, durable option to restore factory cutting performance on residential and commercial zero-turn mowers using the specified deck and part number.