{"product_id":"xiube-12v-led-pool-bulb-par56-ocean-blue-36w-4200lm-e26-deep-underwater-color-energy-efficient","title":"XIUBE 12V LED Pool Bulb PAR56 Ocean Blue, 36W 4200lm E26 — Deep Underwater Color, Energy Efficient","description":"\u003cp\u003e\u003cstrong\u003eXIUBE 12V 36W Ocean Blue LED pool bulb is a high-output PAR56 replacement that delivers deep blue underwater illumination while using far less power than comparable halogen lamps.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 12-volt LED lamp is made to replace incandescent or halogen PAR56 pool bulbs in common underwater fixtures (E26\/E27 base). With 4200 lumens of cool blue light and an energy-efficient 36W draw, it lights large pools while producing a dramatic ocean-blue color. It is intended for use in dedicated 12V pool light housings—do not connect directly to 120V circuits—and the lamp itself is not a sealed underwater housing, so the original fixture cover and gasket must be used to keep the installation watertight.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright and what color does this bulb produce?\u003c\/h3\u003e\n\n\u003cp\u003eThe XIUBE Ocean Blue LED yields about 4200 lumens at 6500K with a rich, deep blue appearance in water. It’s designed to replace much higher-wattage halogen bulbs while producing intense, even color across a large surface area.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOutput: approximately 4200 lumens for strong underwater illumination.\u003c\/li\u003e\n  \u003cli\u003ePower: 36W energy consumption, comparable visual output to 300–600W halogen.\u003c\/li\u003e\n  \u003cli\u003eColor: ocean blue tone optimized for pools (6500K labeling but visually deep blue).\u003c\/li\u003e\n  \u003cli\u003eCoverage: suitable for up to ~30,000-gallon pools depending on fixture placement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this bulb compatible with my pool fixture and power supply?\u003c\/h3\u003e\n\n\u003cp\u003eThis lamp uses an E26\/E27 screw base and fits PAR56-sized housings commonly used by brands like Amerlite, Hayward, Pentair, Jacuzzi and Sta-Rite. It requires an AC\/DC 12V supply—do not install it in a 110V or 120V line without a proper transformer or low-voltage driver.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBase type: standard E26\/E27 screw-in for PAR56 housings.\u003c\/li\u003e\n  \u003cli\u003eVoltage: AC\/DC 12V only; confirm your transformer or low-voltage line before purchase.\u003c\/li\u003e\n  \u003cli\u003eForm factor: 6.7-inch diameter, 5.3-inch length—measure your fixture to verify fit.\u003c\/li\u003e\n  \u003cli\u003eCommonly compatible housings: Amerlite 784 series, Hayward Astroite, Jacuzzi Full Moon, Sta-Rite SwimQuip series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and safety steps should I follow?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing the pool bulb is usually straightforward but requires attention to sealing and correct voltage. Always turn off power at the transformer, remove the fixture cover, replace the lamp, and fit a new gasket recommended by your housing manufacturer to prevent leaks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePower off: isolate the 12V transformer before any work.\u003c\/li\u003e\n  \u003cli\u003eGasket: install a fresh rubber gasket to avoid water intrusion.\u003c\/li\u003e\n  \u003cli\u003eFixture cover: use the original sealed housing cover—bulb is not itself waterproof.\u003c\/li\u003e\n  \u003cli\u003eVoltage check: confirm your system is 12V AC\/DC; do not use in 110V–120V systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will the LED last and what kind of support is included?\u003c\/h3\u003e\n\n\u003cp\u003eThe bulb uses high-quality LEDs rated for extended operating life and includes thermal protection to reduce premature failure. XIUBE offers a 12-month replacement service for manufacturing defects, but warranty does not cover damage from incorrect voltage connection or improper housing installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLED lifespan: long-life LEDs rated for tens of thousands of hours.\u003c\/li\u003e\n  \u003cli\u003eProtection: built-in heat overload protection to extend service life.\u003c\/li\u003e\n  \u003cli\u003eCertifications: CE, RoHS, FCC compliance for safety and quality standards.\u003c\/li\u003e\n  \u003cli\u003eWarranty: 12 months free replacement for qualifying defects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: choose the XIUBE 12V 36W Ocean Blue LED pool bulb if you have a compatible PAR56 12V pool lighting system and want dramatic blue underwater lighting with much lower energy use than halogen. It’s aimed at pool owners, pool service professionals, and facilities managers who need a bright, durable replacement for larger residential or commercial pools—confirm your fixture dimensions, E26\/E27 base, and 12V supply before ordering.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this XIUBE bulb in a 120V pool light system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This bulb requires AC\/DC 12V. Do not connect to 110V–120V without a proper transformer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a new gasket when replacing my old pool bulb?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Always install a new housing gasket to ensure a watertight seal and avoid leaks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"XIUBE","offers":[{"title":"Default Title","offer_id":56834358673748,"sku":"B07PYX49GH","price":85.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/xiube-front-view-ocean-blue-bulb.jpg?v=1787049344","url":"https:\/\/gardenluxe.co.uk\/products\/xiube-12v-led-pool-bulb-par56-ocean-blue-36w-4200lm-e26-deep-underwater-color-energy-efficient","provider":"Gardenluxe Uk","version":"1.0","type":"link"}