{"product_id":"pool-mate-winter-pool-cover-for-inground-pools-25-x-45-ft-classic-dura-guard-solid-polyethylene-uv-coated-reinforced-seams","title":"Pool Mate winter pool cover for inground pools 25 x 45 ft Classic Dura-Guard — solid polyethylene, UV-coated, reinforced seams","description":"\u003cp\u003e\u003cstrong\u003ePool Mate's 25 x 45 ft Classic Dura-Guard winter cover is a solid, heavy-duty polyethylene cover designed to keep inground pools protected from snow, ice and debris throughout the off-season.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you close your pool for the season, choosing a cover that prevents water penetration, resists UV damage and holds up under winter loads matters. The Pool Mate Classic Dura-Guard is built from a tightly woven polyethylene scrim with reinforced seams and a blue UV-coated topside to extend life. Its design includes extra overlap and perimeter loops for vinyl water weights, making installation straightforward and providing reliable winter protection without relying on seasonal debris covers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover handle winter weather and ponding?\u003c\/h3\u003e\n\n\u003cp\u003eThe Classic Dura-Guard is a solid (non-permeable) winter cover that blocks water entry and shields the pool from snow, ice and falling debris. Because it sits on the water surface, it helps prevent leaves and bulk material from entering the pool during months of inactivity. It’s engineered to support seasonal loads while minimizing stress at seams.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTight polyethylene weave (8 x 8 scrim) resists tears and stretching.\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams strengthen joints against winter strain.\u003c\/li\u003e\n  \u003cli\u003eBlue UV-coated topside slows sun damage during early\/late-season exposure.\u003c\/li\u003e\n  \u003cli\u003eSolid design prevents direct water transfer into the pool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size coverage and installation details should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThis model is sized for a 25 x 45 ft inground pool and includes a generous five-foot overlap on all sides, yielding an overall cover footprint of roughly 30 x 50 ft. The overlap gives installers room to secure water weights without leaving excess material exposed on the deck. For pools with steps, benches or other protrusions, ordering the next size up is recommended so the cover floats freely without undue tension.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes 5 ft overlap beyond pool dimensions for easier fitting.\u003c\/li\u003e\n  \u003cli\u003eOverall cover size with overlap: approximately 30 x 50 ft.\u003c\/li\u003e\n  \u003cli\u003eLoops sewn around perimeter to accept vinyl water weights (sold separately).\u003c\/li\u003e\n  \u003cli\u003eRecommended to upsize if pool has steps or raised features.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features make this cover long-lasting?\u003c\/h3\u003e\n\n\u003cp\u003ePool Mate builds the Classic Dura-Guard from robust polyethylene with an 8 x 8 scrim pattern and a material weight engineered above industry norms. Heat-sealed seams and a UV-resistant topcoat enhance longevity. The manufacturer backs the cover with a long warranty and emphasizes construction choices that balance weight, strength and flexibility for seasonal performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePolyethylene fabric at about 80 g\/m² (woven scrim for tear resistance).\u003c\/li\u003e\n  \u003cli\u003eMaterial is approximately 18% heavier than standard options for extra durability.\u003c\/li\u003e\n  \u003cli\u003eAll seams are heat sealed to reduce seam failure risk.\u003c\/li\u003e\n  \u003cli\u003eCovered by a 10-year limited warranty for residential use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich installation practices and precautions should I follow?\u003c\/h3\u003e\n\n\u003cp\u003ePool Mate recommends using only vinyl water weights placed through the cover loops to hold the cover in place; other attachment methods are not advised. The cover should float lightly on the pool surface — avoid pulling it taut — and any excess material should be tucked beneath the weights or padded to prevent chafing against sharp edges. This cover is intended for off-season winter protection, not as a summertime debris cover.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse vinyl water weights only (not included) to secure the perimeter.\u003c\/li\u003e\n  \u003cli\u003eDo not stretch the cover tight; allow it to float with modest slack.\u003c\/li\u003e\n  \u003cli\u003eFold or pad excess material to avoid deck abrasion or corner wear.\u003c\/li\u003e\n  \u003cli\u003eAvoid using the cover for in-season debris protection; it’s designed for winter use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this cover is for: The Pool Mate 25 x 45 ft Classic Dura-Guard is aimed at homeowners with standard rectangular inground pools who want a strong, solid winter closure that simplifies installation and offers reliable protection against snow, ice and large debris. Choose this cover if you prefer a heavier-duty material, value heat-sealed seams and a UV-coated top, and plan to secure the cover with vinyl water weights. If your pool has built-in steps, seats or an irregular shape, consider sizing up to ensure a relaxed fit and avoid stress on the material.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cover waterproof or water-permeable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This is a solid, non-permeable winter cover that prevents water from passing through.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are water weights included with the cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — vinyl water weights are sold separately and are the recommended method to secure the cover.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":56806046564692,"sku":"B01H8ET2KE","price":316.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/pool-mate-front-packaging-25x45.jpg?v=1786812470","url":"https:\/\/gardenluxe.co.uk\/products\/pool-mate-winter-pool-cover-for-inground-pools-25-x-45-ft-classic-dura-guard-solid-polyethylene-uv-coated-reinforced-seams","provider":"Gardenluxe Uk","version":"1.0","type":"link"}