{"product_id":"nixesky-10-awg-solar-cable-100ft-red-100ft-black-with-6-pairs-mc4-connectors-uv-resistant","title":"Nixesky 10 AWG Solar Cable 100ft Red + 100ft Black with 6 Pairs MC4 Connectors, UV‑Resistant","description":"\u003cb\u003eNixesky's 10 AWG solar cable set provides two 100 ft (30 m) runs—one black, one red—complete with six pairs of solar MC4-style connectors for reliable DC connections on RVs, roofs, and PV systems.\u003c\/b\u003e\n\n\u003cp\u003eThese heavy-duty extension wires are built for outdoor solar use: tinned copper strands, thick UV-resistant jacketing, and ratings that meet high-voltage and temperature demands. The twin 100 ft lengths let you route panels or link arrays without splicing, while the included connector pairs speed up installation and ensure weatherproof mating points. Designed to balance low voltage drop and long-term durability, this kit is meant for off-grid setups, mobile power, and rooftop photovoltaic installations.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cable maintain performance across long runs?\u003c\/h3\u003e\n\u003cp\u003eThe 10 AWG conductor size (approximately 6 mm²) keeps resistance low so more of your panel output reaches the charge controller or inverter. Tinned copper strands improve conductivity and resist corrosion compared with bare copper, especially where moisture or salt exposure is a risk. The cable's thicker 6.1 mm outer diameter adds mechanical protection, reducing heat buildup and wear from movement or rubbing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10 AWG\/6 mm² conductor minimizes voltage drop over 30 m runs\u003c\/li\u003e\n  \u003cli\u003eTinned copper strands for better corrosion resistance\u003c\/li\u003e\n  \u003cli\u003e6.1 mm jacket thickness for abrasion and wear protection\u003c\/li\u003e\n  \u003cli\u003eRated current: 54 A, suitable for many small- to mid-scale systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these wires handle outdoor conditions and temperature extremes?\u003c\/h3\u003e\n\u003cp\u003eThe cable jacket is formulated for UV resistance and wide temperature tolerance, so it stays flexible and intact from cold winters to scorching summers. A tested AC withstand voltage and TÜV certification indicate quality control and safety under typical environmental stressors. That makes the set appropriate for rooftop installations, boats, and RV exteriors where exposure to sun and temperature cycling is constant.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature range: -40°F to 194°F (-40°C to 90°C)\u003c\/li\u003e\n  \u003cli\u003eUV-resistant jacket protects against sun degradation\u003c\/li\u003e\n  \u003cli\u003eAC test voltage: 6.5 kV for insulation robustness\u003c\/li\u003e\n  \u003cli\u003eTÜV-certified construction for manufacturing consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectors are included and how do they simplify installation?\u003c\/h3\u003e\n\u003cp\u003eSix pairs of paired solar connectors are included so you can create secure, weatherproof DC connections without buying additional fittings. The connectors match standard solar plug-and-socket designs, allowing quick mating and demating of panel leads, extension runs, and branch circuits. Using pre-terminated connectors cuts assembly time and reduces the chance of improper crimping or sealing during field installs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix pairs of solar-style connectors for immediate use\u003c\/li\u003e\n  \u003cli\u003ePre-terminated ends reduce installation time and error\u003c\/li\u003e\n  \u003cli\u003eWeatherproof connector design for outdoor exposure\u003c\/li\u003e\n  \u003cli\u003eCompatible with common PV panel and inverter connector standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do electrical ratings translate to real-world system compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe cable's rated voltage of 1.5 kV and 54 A current capacity make it suitable for most residential and mobile PV circuits when used within system design limits. Conductor resistance at 20°C is low (≤ 3.39 Ω\/km), so the pair performs well in arrays where run length and series\/parallel configurations matter. Always size conductors and protections according to your charge controller, inverter, and local electrical code requirements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated voltage: 1.5 kV for high-voltage PV strings\u003c\/li\u003e\n  \u003cli\u003eRated current: 54 A for mid-range array outputs\u003c\/li\u003e\n  \u003cli\u003eConductor resistance ≤ 3.39 Ω\/km at 20°C for efficient transfer\u003c\/li\u003e\n  \u003cli\u003eUse with proper overcurrent protection and code-compliant terminations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: homeowners, RV owners, boaters, and solar installers who need a dependable, ready-to-connect pair of long extension leads for panels and small arrays. If you want to avoid cutting and crimping on-site, prefer corrosion-resistant conductors for coastal or mobile use, and require UV-rated jacketing for rooftop exposure, this Nixesky 100 ft black and red 10 AWG kit is built for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these cables be buried underground?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are designed for outdoor exposure but not specifically rated for direct burial; use conduit or burial-rated cable for underground runs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the connectors compatible with standard MC4 plugs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the included solar-style connectors match common PV plug standards for easy mating with most panels.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Nixesky","offers":[{"title":"Default Title","offer_id":56800650559828,"sku":"B0DQYJ2KJN","price":185.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/nixesky-front-packaging-10awg-dual-spool.jpg?v=1786738083","url":"https:\/\/gardenluxe.co.uk\/products\/nixesky-10-awg-solar-cable-100ft-red-100ft-black-with-6-pairs-mc4-connectors-uv-resistant","provider":"Gardenluxe Uk","version":"1.0","type":"link"}