{"product_id":"hydro-quip-5-5kw-240v-flo-thru-heating-element-universal-spa-small-pool-replacement-with-mounting-hardware","title":"Hydro Quip 5.5kW 240V Flo‑Thru Heating Element — Universal Spa \u0026 Small Pool Replacement with Mounting Hardware","description":"\u003cp\u003e\u003cstrong\u003eHydroQuip 5.5kW 240V flo‑thru heating element is a drop‑in electric replacement that fits most spa and small pool hydronic housings and includes mounting hardware and 2” O‑rings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement heating element is built for 240‑volt electric spa and small pool heaters that use a flo‑thru design. It delivers 5.5 kilowatts of heating capacity, comes with the mounting hardware needed for installation, and includes two 2‑inch O‑rings for a sealed connection. The unit is intended as a universal fit for common HydroQuip and compatible heater assemblies where the element style and electrical rating match the original component.\u003c\/p\u003e\n\n\u003ch3\u003eWill this element work in my 240V spa or small pool heater?\u003c\/h3\u003e\n\u003cp\u003eThis 5.5kW element is designed for 240‑volt systems using a flo‑thru configuration. Compatibility depends on the heater housing, terminal layout, and physical mounting. Verify your heater’s electrical rating and the element’s length and terminal type before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eElectrical rating: 5.5 kilowatts at 240 volts\u003c\/li\u003e\n  \u003cli\u003eFlo‑thru design for inline water flow heater housings\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting hardware to match typical element housings\u003c\/li\u003e\n  \u003cli\u003eTwo 2” O‑rings for a proper seal at the flange\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the HydroQuip element safely?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic mechanical and electrical skills; always disconnect power before servicing. Remove the old element, replace O‑rings, mount the new element with supplied hardware, and reconnect electrical terminals per manufacturer wiring diagrams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off all power at the breaker; confirm with a tester\u003c\/li\u003e\n  \u003cli\u003eDrain or isolate water from the heater housing if required\u003c\/li\u003e\n  \u003cli\u003eReplace the 2” O‑rings and tighten supplied mounting fasteners evenly\u003c\/li\u003e\n  \u003cli\u003eReconnect and verify secure electrical connections before restoring power\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat routine checks keep this element working reliably?\u003c\/h3\u003e\n\u003cp\u003ePeriodic inspection extends service life: look for signs of corrosion, mineral buildup, or loose terminals. Monitor system performance; reduced heat output or tripped breakers can indicate element or wiring issues needing prompt attention.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect terminals for tightness and corrosion every season\u003c\/li\u003e\n  \u003cli\u003eCheck O‑rings and replace if brittle or damaged\u003c\/li\u003e\n  \u003cli\u003eFlush or treat water to minimize mineral scaling on the element\u003c\/li\u003e\n  \u003cli\u003eTest amp draw against manufacturer specs to detect faults\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the package include and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eThe product ships with the 5.5kW 240V flo‑thru element, mounting hardware, and two 2” O‑rings. Basic hand tools are usually sufficient; specialized electrical tools may be required for safe reconnection and testing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: HydroQuip 5.5kW element, mounting bolts\/nuts, two 2” O‑rings\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: insulated screwdriver, socket set, multimeter, pliers\u003c\/li\u003e\n  \u003cli\u003eOptional: replacement gaskets, thread sealant per housing specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The HydroQuip 5.5kW 240V flo‑thru universal heating element is aimed at pool and spa owners, service technicians, and maintenance professionals who need a direct electric element replacement for flo‑thru style heater housings. It’s appropriate when the original element matches the 240V, 5.5kW rating and the housing accommodates the flo‑thru flange and terminal arrangement. If you’re unsure about fit or electrical compatibility, consult your heater’s manual or a licensed service technician before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this element compatible with 120V systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This HydroQuip element is rated for 240 volts and should not be used on 120V systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are replacement O‑rings included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes two 2‑inch O‑rings along with the mounting hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hydro Quip","offers":[{"title":"Default Title","offer_id":56829988045140,"sku":"B079J5RJF5","price":58.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hydroquip-element-front-view.jpg?v=1786999893","url":"https:\/\/gardenluxe.co.uk\/products\/hydro-quip-5-5kw-240v-flo-thru-heating-element-universal-spa-small-pool-replacement-with-mounting-hardware","provider":"Gardenluxe Uk","version":"1.0","type":"link"}