{"product_id":"eco-worthy-solar-ground-mount-kit-for-4-200w-3-300w-2-400w-panels-galvanized-steel-adjustable-tilt","title":"ECO-WORTHY Solar Ground Mount Kit for 4×200W \/ 3×300W \/ 2×400W Panels — Galvanized Steel, Adjustable Tilt","description":"\u003cp\u003e\u003cstrong\u003eECO-WORTHY's upgraded ground mount is a corrosion-resistant, adjustable bracket system designed to hold 2–4 full-size solar panels securely on open ground, yards, cabins, or farms.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis multi-piece mounting kit is built for homeowners and small off-grid sites that need a sturdy, weatherproof base for 200W–400W panels. The modular frame lets you arrange 4×200W, 3×300W, or 2×400W panels with correct spacing and a center support rod to eliminate sag. Fabricated from galvanized steel and engineered with multiple mounting holes, the system offers long-term durability and angle flexibility so panels capture more sunlight across seasons.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the kit adapt to different panel sizes and layouts?\u003c\/h3\u003e\n\n\u003cp\u003eThe bracket set is modular so you can configure it to accept common residential panel widths and stack counts. Width allowances and pillar heights give room for larger panels and ensure clearances for wiring and airflow.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSuitable layouts: 4×200W (panel width \u0026lt; 27.5 in) or 3×300W (panel width \u0026lt; 38.6 in) or 2×400W.\u003c\/li\u003e\n  \u003cli\u003eOverall footprint: frame measures 118 in long × 39 in wide with front\/rear pillar height variance.\u003c\/li\u003e\n  \u003cli\u003eFront column ≈ 13.78 in, rear column ≈ 28.53 in for tilt and clearance.\u003c\/li\u003e\n  \u003cli\u003eRoom behind panels for batteries, controllers, or inverters to save space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow stable and wind-resistant is the mounting system?\u003c\/h3\u003e\n\n\u003cp\u003eThe design adds rigidity where panels typically sag by specifying a parallel column spacing and a reinforced center support. When installed as recommended, it raises the load capacity and resists mid-span deflection that commonly shortens system life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRecommended column spacing between parallel verticals: 59 in for optimal strength.\u003c\/li\u003e\n  \u003cli\u003eIncluded reinforced middle support rod rated to bear about 160 lbs to prevent sagging.\u003c\/li\u003e\n  \u003cli\u003eGalvanized steel construction reduces corrosion and keeps structural integrity over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I adjust the tilt to improve seasonal performance?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the mounting brackets include multiple hole positions so you can set panel angle between approximately 30° and 60°. Changing tilt helps align the solar array with the sun path and can improve annual energy capture without roof access.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAdjustable tilt range: roughly 30°–60° via repositionable hardware.\u003c\/li\u003e\n  \u003cli\u003eMultiple pre-drilled holes make fine-tuning straightforward during installation.\u003c\/li\u003e\n  \u003cli\u003eAngle adjustment supports optimization for latitude, season, or shading conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the system easy for a DIY installer to set up?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit is intended for amateur installers as well as professionals: parts are pre-cut, labeled, and accompanied by step-by-step instructions and an installation video. Basic tools and two or three people are enough to position and secure the frame safely.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eComes with a detailed printed manual and online installation video walkthrough.\u003c\/li\u003e\n  \u003cli\u003eModular components reduce on-site cutting or fabrication.\u003c\/li\u003e\n  \u003cli\u003eClear labeling and standardized fasteners help speed assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ECO-WORTHY Upgraded Ground Mount kit is targeted at homeowners, small-hold farmers, cabin owners, and DIY off-grid enthusiasts who want a durable, adjustable platform for 2–4 standard solar panels. It’s a good match when you need a corrosion-resistant frame that supports larger panel widths, allows tilt optimization, provides space for ancillary equipment behind the array, and offers a simple installation path without custom fabrication.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What panel counts and sizes does this mount support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Configurable for 4×200W (panel width \u0026lt;27.5 in), 3×300W (width \u0026lt;38.6 in), or 2×400W panels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How steep can I tilt the panels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Tilt is adjustable between about 30° and 60° using the kit's multiple hole positions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ECO-WORTHY","offers":[{"title":"Default Title","offer_id":56801589723476,"sku":"B0831DDS9W","price":248.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/eco-worthy-front-packaging.jpg?v=1786744486","url":"https:\/\/gardenluxe.co.uk\/products\/eco-worthy-solar-ground-mount-kit-for-4-200w-3-300w-2-400w-panels-galvanized-steel-adjustable-tilt","provider":"Gardenluxe Uk","version":"1.0","type":"link"}