{"product_id":"danner-pondmaster-pond-mag-950-gph-magnetic-drive-pond-pump-3-4-fittings-submersible-inline","title":"Danner Pondmaster Pond-Mag 950 GPH Magnetic-Drive Pond Pump — 3\/4\" Fittings, Submersible\/Inline","description":"\u003cp\u003e\u003cstrong\u003eThe Danner Pondmaster Pond-Mag 950 GPH is a magnetic-drive water pump built for continuous, quiet circulation in small to mid-size ponds and water features.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Pond-Mag line from Danner Manufacturing offers rugged, seal-free pumping using a magnet impeller and an epoxy-encased motor assembly to reduce maintenance and extend service life. Model 02720 delivers up to 950 gallons per hour and is certified to UL\/ETL standards, making it a reliable option for fountains, biological filters, skimmers and recirculation loops. It ships with a rigid pre-filter, an 18-foot cord, and supports submerged or inline installation for flexible placement.\u003c\/p\u003e\n\n\u003ch3\u003eHow much pond can the 950 GPH Pond-Mag handle?\u003c\/h3\u003e\n\u003cp\u003eThe 950 GPH rating is a good fit for ponds roughly between 850 and 1,100 gallons when used for general circulation, filtration and moderate waterfall flows. Flow will vary with elevation change and plumbing restrictions, so match pump head and fittings to your setup. Check the performance curve for specific head vs. flow data when planning features.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNominal flow: 950 gallons per hour\u003c\/li\u003e\n  \u003cli\u003eIdeal pond size: approximately 850–1,100 gallons\u003c\/li\u003e\n  \u003cli\u003eInlet\/outlet: 3\/4\" FPT inlet, 3\/4\" MPT outlet\u003c\/li\u003e\n  \u003cli\u003eUseful for pumps feeding filters, skimmers, small waterfalls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the Pond-Mag design lower maintenance?\u003c\/h3\u003e\n\u003cp\u003eThis pump uses a magnet-driven impeller assembly and an epoxy-encased power unit, eliminating traditional shaft seals that wear out. The ceramic shaft and magnetic coupling keep internal wear minimal and reduce leak risk, letting the unit run continuously. A rigid pre-filter helps protect the impeller from debris, lowering cleaning frequency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMagnet impeller assembly removes mechanical shaft seals\u003c\/li\u003e\n  \u003cli\u003eEpoxy-encased motor protects electronics from moisture\u003c\/li\u003e\n  \u003cli\u003eCeramic shaft for durable, low-friction operation\u003c\/li\u003e\n  \u003cli\u003eIncluded pre-filter reduces clogging and maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install this pump submerged or inline?\u003c\/h3\u003e\n\u003cp\u003eThe Pond-Mag 950 is engineered for both submerged and inline installations, offering versatility for different layouts. Submersed use is common for pond bottoms and skimmers, while inline placement suits protected, dry utility areas. Always ensure proper suction, check for air leaks in inline runs, and position the pre-filter where it can be accessed for cleaning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates submerged for direct pond circulation\u003c\/li\u003e\n  \u003cli\u003eSupports inline installation for sheltered mechanical setups\u003c\/li\u003e\n  \u003cli\u003e18' cord for flexible positioning and routing\u003c\/li\u003e\n  \u003cli\u003e3\/4\" fittings match common pond plumbing sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the electrical specs and warranty coverage?\u003c\/h3\u003e\n\u003cp\u003eThe pump runs on 120V\/60Hz power and draws up to 1.33 amps (maximum 93 watts). Danner certifies this model to UL\/ETL safety standards and backs it with a 5-year limited warranty, giving buyers protection against manufacturing defects under normal use. Follow recommended installation and maintenance practices to preserve warranty coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: 120 V \/ 60 Hz\u003c\/li\u003e\n  \u003cli\u003eMax watts\/amps: 93 W \/ 1.33 A\u003c\/li\u003e\n  \u003cli\u003eCord length: 18 feet for remote connections\u003c\/li\u003e\n  \u003cli\u003e5-year limited warranty from Danner Manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Danner Pondmaster Pond-Mag 950 GPH pump is aimed at pond owners, landscapers and waterfeature installers who need a dependable, low-maintenance circulator for small to mid-sized ponds, skimmers or filter systems. It suits applications that require continuous operation with minimal upkeep, those converting existing setups to a seal-free magnetic drive, and anyone looking for a UL\/ETL-certified pump with a solid warranty. If you need higher flow for larger waterfalls or very large ponds, consider larger Pond-Mag models in the 1800–3600 GPH range.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Pond-Mag 950 suitable for continuous operation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The magnetic-drive design and epoxy-encased motor allow continuous, low-maintenance operation without traditional shaft seals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What plumbing size does the 950 GPH pump require?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses a 3\/4\" FPT inlet and 3\/4\" MPT outlet, compatible with common pond plumbing fittings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Danner","offers":[{"title":"Default Title","offer_id":56800408011092,"sku":"B00025686I","price":200.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/danner-pondmag-front-view.jpg?v=1786737829","url":"https:\/\/gardenluxe.co.uk\/products\/danner-pondmaster-pond-mag-950-gph-magnetic-drive-pond-pump-3-4-fittings-submersible-inline","provider":"Gardenluxe Uk","version":"1.0","type":"link"}