{"title":"Pool \u0026 Spa Replacement Parts","description":"\u003cp\u003eExplore our pool \u0026amp; spa replacement parts range, featuring Pentair, Hayward, Zodiac and more. Every order ships free across the UK, with free 30-day returns as standard.\u003c\/p\u003e","products":[{"product_id":"hayward-duraniche-face-plate-for-underwater-lights-white-abs-low-profile-corrosion-resistant","title":"Hayward DuraNiche Face Plate for Underwater Lights, White — ABS Low-Profile, Corrosion-Resistant","description":"\u003cstrong\u003eThe Hayward SPX0507A1 is a white ABS face plate that gives DuraNiche underwater light housings a clean, corrosion-resistant finish.\u003c\/strong\u003e\n\n\u003cp\u003eThis slim, purpose-built front frame replaces or updates the visible trim on Hayward DuraNiche series underwater light niches. Crafted from rugged ABS, the SPX0507A1 provides a neat, low-profile appearance while resisting corrosion in pool and spa environments. It fits several DuraNiche models and is intended for vinyl and fiberglass pools except for one compatible niche used in gunite installations.\u003c\/p\u003e\n\n\u003ch3\u003eWhich DuraNiche housings does this face plate fit?\u003c\/h3\u003e\n\u003cp\u003eThe SPX0507A1 is designed for use with Hayward DuraNiche light housings. It fits current SP0600U, SP0607U and SP0608U niches as well as the older SP0507 niche. Note: the SP0600U variant is specified for gunite pools while the others are for vinyl and fiberglass.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with SP0600U, SP0607U, SP0608U and legacy SP0507\u003c\/li\u003e\n  \u003cli\u003eCheck pool shell type: most fits are for vinyl\/fiberglass installations\u003c\/li\u003e\n  \u003cli\u003eSP0600U is the gunite-compatible niche in the lineup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the face plate improve my pool’s appearance and longevity?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or discolored trim restores a tidy finished look around underwater fixtures. Made from ABS, the face plate resists chemical attack and moisture, keeping the visible area neat without frequent repainting or replacement. Its low-profile design keeps attention on the light rather than the trim.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWhite finish brightens the light aperture and pool interior contrast\u003c\/li\u003e\n  \u003cli\u003eABS material reduces risk of cracking or corrosion over time\u003c\/li\u003e\n  \u003cli\u003eSimple snap-on or screw attachment keeps installation quick\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and maintenance points I should know?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with pool light niches; the plate replaces the front frame and secures with the same fasteners. Maintenance is minimal — occasional cleaning with pool-safe detergents is usually sufficient. Avoid abrasive cleaners that could scratch the surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses existing niche fastener locations, no special tools required\u003c\/li\u003e\n  \u003cli\u003eWipe clean with mild soap and water\u003c\/li\u003e\n  \u003cli\u003eStore spare plates out of direct sunlight to prevent UV aging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this plate with other manufacturers’ niches?\u003c\/h3\u003e\n\u003cp\u003eThis face plate is manufactured to fit Hayward DuraNiche models specifically; cross-brand compatibility is not guaranteed. If you have a non-Hayward niche, compare hole patterns and dimensions before purchasing or consult an installer for confirmation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptimized for Hayward DuraNiche dimensions and screw layout\u003c\/li\u003e\n  \u003cli\u003eNon-Hayward niches may not match mounting points or seal clearances\u003c\/li\u003e\n  \u003cli\u003eWhen in doubt, measure existing face plate bolt pattern and diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hayward SPX0507A1 is ideal for pool owners, technicians, and service pro contractors who need a durable, attractive replacement or spare front frame for DuraNiche underwater lights. It suits those with vinyl or fiberglass pools using SP0607U\/SP0608U or owners maintaining older SP0507 niches, plus service teams that stock OEM parts to speed repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the SPX0507A1 fit all DuraNiche models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits SP0600U, SP0607U, SP0608U and the older SP0507 niches; note SP0600U is the gunite variant.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material is the face plate made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The face plate is molded from rugged ABS plastic that resists corrosion and pool chemicals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":56798719279444,"sku":"B0030XM3FO","price":92.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hayward-face-plate-front-view.jpg?v=1786726746"},{"product_id":"l-continue-dex2422z2-metal-reinforced-mechanical-seal-for-hayward-c-de-filters-direct-fit-durable","title":"L Continue DEX2422Z2 Metal-Reinforced Mechanical Seal for Hayward C\/DE Filters — Direct-Fit, Durable","description":"\u003cp\u003e\u003cstrong\u003eL Continue DEX2422Z2 is a single metal-reinforced mechanical seal designed to replace worn seals in Hayward C-series and DE-series pool filter housings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty replacement seal restores a reliable, leak-resistant connection on vertical and multiport pool filter housings without requiring specialized tools. Built around a metal-reinforced core, the DEX2422Z2 delivers improved structural stability compared with plain-rubber seals and fits a broad range of Hayward model numbers, making it a useful maintenance part for DIY pool owners and service technicians.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Hayward models does this seal fit?\u003c\/h3\u003e\n\u003cp\u003eThe DEX2422Z2 is manufactured to match the dimensions and mounting profile used across several Hayward filter housings. It is compatible with multiple C-series and DE-series models commonly found on residential pools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Hayward C models: C2030, C3030, C4030, C5030, C7030\u003c\/li\u003e\n  \u003cli\u003eCompatible Hayward DE models: DE2420, DE3620, DE4820, DE6020, DE7220\u003c\/li\u003e\n  \u003cli\u003eCheck your filter’s part number and dimensions before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the metal-reinforced core benefit long-term performance?\u003c\/h3\u003e\n\u003cp\u003eThe built-in metal reinforcement adds rigidity to the seal, helping maintain shape and compression under pump pressure and thermal cycling. That reduces distortion and improves sealing consistency compared with non-reinforced gaskets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResists deformation from repeated pressure cycles\u003c\/li\u003e\n  \u003cli\u003eMaintains a tighter seal under varying temperatures\u003c\/li\u003e\n  \u003cli\u003eExtends service life versus plain elastomer seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation—do I need special tools?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and intended for routine maintenance by pool owners or technicians. No specialized equipment is required—basic hand tools and a clean mating surface are typically all you need.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove the old seal and clean seating surfaces thoroughly\u003c\/li\u003e\n  \u003cli\u003eLubricate lightly with a manufacturer-approved lubricant if recommended\u003c\/li\u003e\n  \u003cli\u003ePress the new DEX2422Z2 into place and reassemble the housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I inspect after replacing the seal?\u003c\/h3\u003e\n\u003cp\u003eAfter installation, run the pump at low speed to check for leaks, then bring the system up to normal operating pressure. Regular inspections help catch sitting leaks or misalignment early.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eObserve the seal area for drips during the first 15 minutes of operation\u003c\/li\u003e\n  \u003cli\u003eCheck clamp bolts or housing fasteners for proper torque\u003c\/li\u003e\n  \u003cli\u003eRe-inspect after the first week of use to confirm sealing stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this part for: The L Continue DEX2422Z2 metal-reinforced seal is intended for pool owners, maintenance professionals, and repair shops who need a durable, direct-fit replacement for Hayward C-series and DE-series filter housings. It’s especially useful for those seeking a stronger, longer-lasting seal that’s quick to install during routine filter maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this seal fit my Hayward DE3620 filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The DEX2422Z2 is compatible with DE3620 and other DE-series models listed; verify part dimensions before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the DEX2422Z2?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Installation typically requires only basic hand tools and care cleaning the seating surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"L Continue","offers":[{"title":"Default Title","offer_id":56798725669204,"sku":"B08H4YD8CW","price":89.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/l-continue-front-seal-packaging.jpg?v=1786726916"},{"product_id":"pentair-racer-debris-bag-replacement-for-racer-pool-spa-cleaners-hook-and-loop-attachment-no-collar-model-360240","title":"Pentair Racer Debris Bag replacement for Racer pool\/spa cleaners — hook-and-loop attachment, no collar (model 360240)","description":"\u003cp\u003e\u003cstrong\u003ePentair Racer Debris Bag with hook-and-loop attachment is a durable replacement collection bag designed to trap leaves and debris in compatible Pentair Racer spa and pool cleaners, supplied without a collar.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace a worn or lost debris bag with this genuine Pentair part (model 360240, UPC 788379862657) to restore your Racer cleaner’s ability to capture larger particles and keep filtration systems running smoothly. The bag fastens with hook-and-loop strips for quick installation and removal and is sold without the rigid collar, making it a straightforward, economical spare for ongoing maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eWill this debris bag fit my Pentair Racer cleaner?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility is centered on Pentair Racer models that use a soft fabric collection bag secured by hook-and-loop fasteners. If your cleaner previously used a hook-and-loop style bag without a rigid collar, this is likely the correct replacement.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePart number: 360240—match this to your cleaner’s documentation.\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop attachment aligns with Racer bag mounts.\u003c\/li\u003e\n  \u003cli\u003eSold without collar—verify if your unit uses a separate collar piece.\u003c\/li\u003e\n  \u003cli\u003eOEM Pentair manufacturing ensures consistent fit and material quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and remove the bag for cleaning?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation and removal are fast thanks to the hook-and-loop fastening. Simply peel the bag off the cleaner frame, empty or rinse debris, and press a fresh or cleaned bag back onto the mounting surface until the fasteners engage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTurn off and secure the cleaner before handling the bag.\u003c\/li\u003e\n  \u003cli\u003ePeel bag free from hook-and-loop strip—no tools required.\u003c\/li\u003e\n  \u003cli\u003eRinse with hose water to remove trapped debris; air dry fully.\u003c\/li\u003e\n  \u003cli\u003ePress bag firmly onto the mounting strip for a secure hold.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and performance can I expect from this Pentair bag?\u003c\/h3\u003e\n\n\u003cp\u003eThe bag is constructed from robust, pool-grade fabric engineered to capture leaves and medium-sized debris while allowing water to pass through to the cleaner’s internal system. Its materials balance durability with washability so routine maintenance keeps it functioning longer.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTightly woven fabric catches common pool\/spa debris efficiently.\u003c\/li\u003e\n  \u003cli\u003eWashable material extends service life between replacements.\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop backing resists loosening during normal operation.\u003c\/li\u003e\n  \u003cli\u003eOEM spec ensures consistent performance with Pentair Racer cleaners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need the collar kit as well?\u003c\/h3\u003e\n\n\u003cp\u003eThis listing excludes the collar, so confirm your cleaner already has a compatible collar or mounting ring before purchase. If your existing collar is damaged or missing, order the separate collar kit to ensure a complete setup.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNo collar included—sold as the bag-only replacement.\u003c\/li\u003e\n  \u003cli\u003eCheck your cleaner for an intact mounting collar before installing.\u003c\/li\u003e\n  \u003cli\u003eIf missing, source the correct Pentair collar kit for a proper fit.\u003c\/li\u003e\n  \u003cli\u003eCombining with an OEM collar helps maintain optimal sealing and alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Pool and spa owners, maintenance professionals, and service technicians who operate Pentair Racer cleaners and need a reliable, easy-to-install replacement bag without the collar. Choose this OEM Pentair part when you want a cost-effective spare that restores debris collection, reduces strain on filters, and fits cleaners that already retain their mounting collar.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the collar included with this Pentair debris bag?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, this listing is the bag only and does not include the rigid collar; purchase the collar kit separately if needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I clean and reuse this Pentair bag?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — rinse or hose off trapped debris and allow the bag to air dry before reinstalling for repeated use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":56798758273364,"sku":"B00XV4EO2W","price":70.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/pentair-racer-debris-bag-front-view.jpg?v=1786727066"},{"product_id":"jacuzzi-sundance-clear-ray-replacement-quartz-tube-6472-859-oem-uv-sleeve-fits-clear-ray-uv-units","title":"Jacuzzi Sundance Clear Ray Replacement Quartz Tube 6472-859 - OEM UV Sleeve, Fits Clear Ray UV Units","description":"\u003cp\u003e\u003cstrong\u003eReplacement quartz tube 6472-859 for Sundance\/JeTzz Jacuzzi Clear Ray UV systems that protects and seals the ultraviolet lamp while allowing maximum UV transmission.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Sundance or Jacuzzi hot tub uses a Clear Ray UV sanitizer, the quartz tube is the glass sleeve that surrounds the UV lamp and keeps water away from the bulb while transmitting UV light. Over time quartz sleeves can crack, cloud, or collect scale, reducing UV output and risking water exposure to the lamp. This genuine Sundance replacement part, model 6472-859, is made to the original equipment dimensions so it fits into the Clear Ray assembly without modification.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this quartz tube matches my Sundance or Jacuzzi spa?\u003c\/h3\u003e\n\u003cp\u003eThe 6472-859 part number is the factory-referenced quartz sleeve for many Sundance Clear Ray UV units. Verify by checking your existing sleeve for the same stamped number or cross-referencing your spa parts diagram. If in doubt, compare length and diameter to your removed piece before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact OEM part number: 6472-859\u003c\/li\u003e\n  \u003cli\u003eDesigned for Sundance\/Clear Ray UV assemblies\u003c\/li\u003e\n  \u003cli\u003eCheck measurements against your existing sleeve\u003c\/li\u003e\n  \u003cli\u003eWorks with compatible Jacuzzi hot tub UV housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the replacement include and what do I need to install it?\u003c\/h3\u003e\n\u003cp\u003eThis listing is for the quartz sleeve only; the UV bulb is not part of the package. Installation typically involves removing the UV housing from the plumbing or skimmer, sliding out the old sleeve, and fitting the new one with clean seals. If the lamp or O-rings look aged, replace them during the same service to ensure a reliable seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: quartz tube (no bulb)\u003c\/li\u003e\n  \u003cli\u003eRecommended additional items: UV lamp, O-rings, silicone-free lubricant\u003c\/li\u003e\n  \u003cli\u003eTools: basic hand tools and a soft cloth\u003c\/li\u003e\n  \u003cli\u003eProfessional help advised if unsure about electrical components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will replacing the quartz sleeve benefit my spa performance?\u003c\/h3\u003e\n\u003cp\u003eA clear, intact quartz sleeve keeps the UV lamp dry and allows efficient UV light transmission to the water, supporting the sanitizer's intended performance. A damaged or cloudy sleeve reduces UV intensity and may expose the lamp to water, shortening lamp life and lowering overall sanitation effectiveness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores optimal UV transmission\u003c\/li\u003e\n  \u003cli\u003eProtects the bulb from water contact\u003c\/li\u003e\n  \u003cli\u003eHelps maintain designed sanitizer flow and performance\u003c\/li\u003e\n  \u003cli\u003ePrevents premature lamp replacement due to water exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this replacement part for? If you own a Sundance or Jacuzzi hot tub equipped with a Clear Ray UV sanitizer and you notice reduced UV performance, visible sleeve cracks, clouding, or mineral buildup, this OEM 6472-859 quartz tube is the direct-fit replacement you need. It's aimed at spa owners, service technicians, and parts resellers who want an authentic Sundance component to preserve original equipment fit and function. Remember that this product is the glass sleeve only — if you're replacing a sleeve because of water intrusion or age, consider replacing the UV lamp and seals at the same time to ensure a complete, durable repair.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replacement include the UV bulb?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the 6472-859 listing is the quartz sleeve only; the UV bulb must be purchased separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the quartz tube myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if you're comfortable with basic disassembly, but replace O-rings and consider pro help for electrical reconnection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Jacuzzi","offers":[{"title":"Default Title","offer_id":56798776426836,"sku":"B00AYHMCNC","price":70.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/jacuzzi-quartz-tube-front-view.jpg?v=1786727249"},{"product_id":"bilinavy-spa-in-filter-mineral-sticks-for-hot-tubs-blue-4-pack-silver-ion-cartridge-inserts-4-months-each","title":"Bilinavy Spa in‑Filter Mineral Sticks for Hot Tubs, Blue 4‑Pack — Silver‑ion Cartridge Inserts, 4 Months Each","description":"\u003cp\u003e\u003cstrong\u003eBilinavy Spa in-filter mineral sticks are a 4-piece set of blue silver-ion mineral cartridges that sit inside your hot tub filter to help reduce impurities and refresh water for up to four months per stick.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese in-filter mineral sticks are made to work alongside your existing cartridge filter so you can enjoy clearer water with minimal fuss. Each box contains four blue sticks; every stick weighs about 10 oz and provides maintenance for approximately four months. They’re engineered for use in spas and hot tubs up to 500 gallons (about 2000 L) and require a minimum filter length and opening to fit correctly.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these mineral sticks improve my hot tub water?\u003c\/h3\u003e\n\n\u003cp\u003eThe Bilinavy sticks release trace silver ions and other minerals that help control contaminants that make water appear cloudy or smell unpleasant. They don’t replace your sanitizer but act as a complementary treatment to keep the water feeling fresher between regular maintenance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReduces suspended impurities that cause cloudiness\u003c\/li\u003e\n  \u003cli\u003eHelps maintain a clearer, fresher-smelling hot tub environment\u003c\/li\u003e\n  \u003cli\u003eWorks continuously while the pump is running and the cartridge is in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does each stick last and how many do I need?\u003c\/h3\u003e\n\n\u003cp\u003eEach Bilinavy mineral stick lasts up to four months under normal spa conditions. The 4-pack gives you roughly 16 months of coverage if you replace and rotate sticks as recommended, making it a cost-effective way to extend periods between more intensive treatments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExpected life: up to 4 months per stick\u003c\/li\u003e\n  \u003cli\u003eBox includes 4 sticks for sequential replacement or for multiple tubs\u003c\/li\u003e\n  \u003cli\u003eLow-maintenance option to reduce frequency of deeper cleanings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my existing hot tub filter cartridge?\u003c\/h3\u003e\n\n\u003cp\u003eFitment is simple but important: the mineral rods require a minimum filter length of about 6.5 inches and a minimum filter opening of 1-1\/4 inches. They are designed to be placed inside standard cartridge filters and are suitable for tubs up to 500 gallons (2000 L).\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMinimum filter length required: ~6.5 inches\u003c\/li\u003e\n  \u003cli\u003eMinimum filter hole diameter: 1-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003eSuitable for spas and hot tubs up to 500 gallons \/ 2000 L\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and ongoing use?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward and does not require tools. Each pack includes a short manual with step-by-step instructions; the sticks are heat-resistant and designed to be inserted into the filter at the existing flow rate without modification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eQuick install: place the rod inside the cartridge filter following the included manual\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant design to withstand normal spa temperatures\u003c\/li\u003e\n  \u003cli\u003eNo changes to plumbing or pump settings required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Bilinavy Spa in-filter mineral sticks are aimed at spa and hot tub owners who want a low-effort option to improve water clarity and freshness between regular sanitizing routines. They’re a fit for people with standard cartridge filters that meet the size requirements and for anyone managing spas up to 500 gallons who prefers extended-interval maintenance and reduced ongoing costs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does each Bilinavy mineral stick last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each stick lasts up to four months under normal spa conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What filter size do these sticks require?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They need a minimum filter length of about 6.5 inches and a 1-1\/4 inch filter opening.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bilinavy","offers":[{"title":"Default Title","offer_id":56798806311252,"sku":"B08W2793M1","price":68.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/bilinavy-front-packaging-blue.jpg?v=1786727396"},{"product_id":"hqpasfy-piston-shaft-assembly-for-pentair-slide-valves-replacement-kit-263064-263052-with-o-rings-lubricant","title":"HQPASFY Piston Shaft Assembly for Pentair Slide Valves — Replacement Kit (263064\/263052) with O‑Rings \u0026 Lubricant","description":"\u003cp\u003e\u003cstrong\u003eHQPASFY 263064, 263052 piston shaft assembly is a direct replacement piston-rod kit designed to restore smooth push-pull operation and reliable backwash switching on compatible Pentair slide and multi-port valves.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis piston shaft assembly rebuilds the internal push-pull mechanism in Pentair-style slide valves so your filtration system can switch cleanly between normal filtration and backwash cycles. Manufactured from wear-resistant plastic and supplied with rings and lubricant, the kit replaces several Pentair reference numbers and is intended as a drop-in service part for pool and spa valve maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this assembly control filtration and backwash modes?\u003c\/h3\u003e\n\u003cp\u003eThe piston rod moves vertically inside the slide valve to change flow paths. Pulling the handle lifts the piston into the backwash position; pushing it down returns the unit to filtration. That movement isolates the cleaning flow and keeps water from bypassing the filter media.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush-pull piston action repositions internal valve ports.\u003c\/li\u003e\n  \u003cli\u003ePrecise fit reduces internal leakage and premature wear.\u003c\/li\u003e\n  \u003cli\u003eIncluded O-rings and lubricant help maintain a tight seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and what Pentair numbers does it replace?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships complete with the piston shaft assembly, a black round cover, lubricant sachet, two small O-rings and one large O-ring for sealing. It is cross-referenced to multiple Pentair replacement numbers so you can match it to your valve.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete piston rod assembly for immediate installation.\u003c\/li\u003e\n  \u003cli\u003eSealing hardware (2 small O-rings, 1 large O-ring) to prevent leaks.\u003c\/li\u003e\n  \u003cli\u003eLubricant to ease installation and protect seals from wear.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Pentair numbers 263055, 263064, 263052, 263053, 263078, 263079.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what safety steps should I take?\u003c\/h3\u003e\n\u003cp\u003eInstalling the piston shaft assembly is straightforward for anyone comfortable with basic pool maintenance. Always power down the pump and relieve system pressure before disassembling the valve to avoid water discharge and injury.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off equipment and depressurize the filtration system first.\u003c\/li\u003e\n  \u003cli\u003eRemove the valve cover and extract the old piston rod carefully.\u003c\/li\u003e\n  \u003cli\u003eFit the supplied O-rings and apply the included lubricant for a smooth seal.\u003c\/li\u003e\n  \u003cli\u003eReassemble, restore pressure, and cycle the valve to confirm function.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat material qualities ensure long service life?\u003c\/h3\u003e\n\u003cp\u003eThe main components are molded from durable plastic chosen for corrosion resistance and tolerance to pool chemicals and temperature fluctuations. Robust material and correct sealing reduce friction and the risk of cracking from repeated valve operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant plastic body for extended field life.\u003c\/li\u003e\n  \u003cli\u003eHeat and wear tolerant to withstand frequent use.\u003c\/li\u003e\n  \u003cli\u003ePrecision-molded contact surfaces reduce abrasion on the slide valve.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Pool and spa owners, service technicians, and maintenance professionals who need an affordable, OEM-compatible piston rod replacement for Pentair-style slide or multi-port valves. If you’re troubleshooting valve leaks, sticky backwash operation, or degraded sealing, this kit provides the parts and basic hardware to restore dependable switching between filtration and cleaning cycles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this piston shaft compatible with my Pentair valve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it replaces Pentair references 263055, 263064, 263052, 263053, 263078 and 263079; verify by matching your valve model and part number.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the assembly myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — basic DIY installation is possible; shut off power, depressurize the system, and follow the included steps carefully.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HQPASFY","offers":[{"title":"Default Title","offer_id":56798816338260,"sku":"B0DSW5PG4R","price":73.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hqpafsy-piston-shaft-assembly-front.jpg?v=1786727433"},{"product_id":"bilinavy-spa-in-filter-mineral-sticks-yellow-4-pack-silver-ion-cartridges-for-clearer-fresher-spa-water-up-to-4-months","title":"Bilinavy spa in-filter mineral sticks — Yellow 4-pack, silver‑ion cartridges for clearer fresher spa water up to 4 months","description":"\u003cp\u003e\u003cstrong\u003eBilinavy Spa in-filter mineral sticks are compact silver-ion cartridges designed to fit inside compatible hot tub filters and help maintain clearer, fresher spa water for up to four months per stick.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese yellow mineral sticks deliver trace minerals and silver ions into your spa’s circulation without replacing your existing filtration system. Lightweight and simple to install, each stick is formulated to work inside filters that meet the listed size requirements and is intended to assist routine water care while lowering maintenance frequency and costs.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these mineral sticks work inside my hot tub filter?\u003c\/h3\u003e\n\u003cp\u003eEach Bilinavy stick releases trace minerals and silver ions into the water as it passes through the filter, providing continuous low-level mineralization while the pump runs. They do not replace filtration or sanitizers but act as an accessory that works alongside your existing system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlace inside the filter cartridge where water flow contacts the stick.\u003c\/li\u003e\n  \u003cli\u003eSilver ions help reduce certain impurities and support clearer water appearance.\u003c\/li\u003e\n  \u003cli\u003eCompatible with pumps and flow rates of typical residential spas.\u003c\/li\u003e\n  \u003cli\u003eDesigned to last about four months under normal use conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my hot tub and how do I install them?\u003c\/h3\u003e\n\u003cp\u003eBilinavy specifies minimum filter dimensions to ensure proper fit and contact with circulating water. Installation is straightforward and requires no tools—simply insert the stick into the filter cartridge and follow the included instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMinimum filter length required: approximately 6.5 inches (16.5 cm).\u003c\/li\u003e\n  \u003cli\u003eMinimum filter hole diameter: 1-1\/4 inches (about 32 mm).\u003c\/li\u003e\n  \u003cli\u003eRecommended for spas up to 500 gallons (≈2000 L).\u003c\/li\u003e\n  \u003cli\u003eComes with a manual to guide quick, heat-resistant placement inside the filter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will each stick last and what maintenance should I expect?\u003c\/h3\u003e\n\u003cp\u003eEach Bilinavy mineral stick is formulated to remain effective for about four months under typical spa usage. After that period you should replace the stick to maintain consistent mineral release; regular water testing and routine sanitizer dosing should continue as usual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated service life: up to 4 months per stick.\u003c\/li\u003e\n  \u003cli\u003eReplace all sticks on the same schedule for balanced performance.\u003c\/li\u003e\n  \u003cli\u003eContinue standard water testing and sanitizer maintenance routines.\u003c\/li\u003e\n  \u003cli\u003eLow-cost maintenance option that complements existing filters and chemicals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits can I expect from adding these sticks?\u003c\/h3\u003e\n\u003cp\u003eUsing Bilinavy mineral sticks can simplify upkeep by softening appearance-related issues and reducing some impurities that affect water clarity. They are intended to extend the perceived cleanliness of the spa water and reduce the need for frequent interventions, while remaining compatible with standard spa care products.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps keep water looking clearer and more inviting between treatments.\u003c\/li\u003e\n  \u003cli\u003eMay lower frequency of minor cleanup tasks and maintenance interventions.\u003c\/li\u003e\n  \u003cli\u003eWorks with existing filter cartridges—no system overhaul required.\u003c\/li\u003e\n  \u003cli\u003eYellow 4-pack offers easy, scheduled replacements for up to a season of use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Bilinavy Spa in-filter mineral sticks suit hot tub and spa owners who want a low-effort accessory to complement their current water-care routine. Ideal for owners of residential spas up to 500 gallons who have filter cartridges meeting the size requirements and want a cost-effective way to support clearer, fresher-feeling water without changing their sanitizer or filtration setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these sticks with any hot tub filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit filters at least 6.5 inches long with a 1-1\/4 inch hole; check your cartridge dimensions first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these replace my sanitizer or filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They complement filtration and sanitizer routines but do not replace chemical sanitizers or cartridge cleaning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bilinavy","offers":[{"title":"Default Title","offer_id":56798828822868,"sku":"B099S5KTY7","price":68.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/bilinavy-front-packaging-spa-mineral-sticks.jpg?v=1786727465"},{"product_id":"fengind-hcd-55-spa-ozone-generator-110v-plug-55-mg-hr-output-for-hot-tubs-swim-spas-includes-tubing-kit","title":"Fengind HCD-55 Spa Ozone Generator 110V Plug — 55 mg\/hr Output for Hot Tubs \u0026 Swim Spas, Includes Tubing Kit","description":"\u003cp\u003e\u003cstrong\u003eThe Fengind HCD-55 Spa Ozone Generator is a 110V ozonator that delivers up to 55 mg\/hour of ozone to help maintain cleaner water in hot tubs and swim spas.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a straightforward retrofit or OEM-style replacement for many hot tub and swim spa systems, the HCD-55 combines compact construction with a high-zone output. It pairs with a venturi injector or an air pump to disperse ozone into circulating water, helping reduce reliance on traditional chemical sanitizers. The kit ships with the hoses, clamps, check valve, and a power cord with AMP-4 plug so you can install it quickly—just confirm the 110V rating and connector compatibility before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the HCD-55 install in my hot tub or swim spa?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be user-friendly and mostly plug-and-play for compatible systems. The unit must be used alongside a venturi injector or air pump; it will not visibly produce bubbles by itself. Fit the included tubing and check valve between the ozone generator and your spa’s injection point, then connect the AMP-4 power cord to a matching socket.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 6-foot tube, check valve, and four hose clamps for secure connections.\u003c\/li\u003e\n  \u003cli\u003eRequires venturi injector or air pump to disperse ozone effectively.\u003c\/li\u003e\n  \u003cli\u003eConfirm your hot tub's AMP-4 connector and 110V rating before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect from 55 mg\/hr ozone output?\u003c\/h3\u003e\n\u003cp\u003eThe HCD-55 is engineered for mid- to large-size spa zones and cites treatment coverage up to 1,500 gallons. At 55 milligrams per hour it provides continuous ozone generation suitable for regular maintenance cycles, helping to minimize organic load and complement your sanitizer program.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e55 mg\/hour ozone output for consistent supplemental sanitation.\u003c\/li\u003e\n  \u003cli\u003eSuitable for spa zones up to approximately 1,500 gallons when properly installed.\u003c\/li\u003e\n  \u003cli\u003eLow-running cost due to efficient output and durable components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eThe HCD-55 kit supplies everything needed for basic hookup: tubing, clamps, check valve, AMP-4 power cord and clear instructions. The generator itself uses a mix of plastics, rubber, steel and copper to balance corrosion resistance with longevity in wet environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackaged with installation instructions and a 6-foot ozone tubing hose.\u003c\/li\u003e\n  \u003cli\u003eIncludes a check valve to prevent backflow and four stainless clamps for secure fittings.\u003c\/li\u003e\n  \u003cli\u003eBuilt with durable materials—plastic housing, rubber seals, metal and copper internals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is support handled if there’s a problem?\u003c\/h3\u003e\n\u003cp\u003eFengind backs this model with a one-year service commitment. If you contact support within that period, the team aims to respond promptly and help resolve installation or performance issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1-year service warranty backed by customer support.\u003c\/li\u003e\n  \u003cli\u003eFengind promises quick email response to identify fit or connector questions.\u003c\/li\u003e\n  \u003cli\u003eReplacement or troubleshooting guidance available if faults appear during warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Fengind HCD-55 suits owners of hot tubs and swim spas who need an efficient, mid-output ozone solution compatible with venturi-style injection systems. It’s ideal for installers and DIYers who can verify a 110V AMP-4 connection and want a drop-in ozone generator to reduce chemical demand and help maintain clearer water. If you’re unsure about connector type or system compatibility, contact Fengind support with your hot tub model before buying.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the HCD-55 work without an air pump or venturi?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The HCD-55 must be used with a venturi injector or air pump to disperse ozone effectively.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What electrical connection does the HCD-55 require?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The unit is rated for 110V and uses an AMP-4 style power plug; confirm compatibility before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fengind","offers":[{"title":"Default Title","offer_id":56798836359508,"sku":"B0CNXGHKJH","price":65.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/fengind-front-panel-overview.jpg?v=1786727495"},{"product_id":"hayward-spx1500ka-seal-assembly-with-cup-for-power-flo-pumps-replacement-seal-for-sp1500-sp1580-sp1590-sp1700-leak-free-shaft-p","title":"Hayward SPX1500KA Seal Assembly with Cup for Power‑Flo Pumps — Replacement Seal for SP1500\/SP1580\/SP1590\/SP1700, Leak‑Free Shaft P","description":"\u003cp\u003e\u003cstrong\u003eHayward SPX1500KA is a complete shaft seal assembly with cup designed to replace worn seals in compatible Power‑Flo pump models, restoring leak-free operation and shaft protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Hayward Power‑Flo or Power‑Flo Matrix pool pump is leaking or making more noise than usual, the SPX1500KA seal assembly provides the matching replacement parts needed to bring the pump back to stable service. This kit is engineered to fit a wide range of Hayward SP1500, SP1580, SP1590 and SP1700 series pumps and includes the cup so you can replace the entire sealing interface in one service visit. It’s a straightforward way to maintain circulation performance without swapping the whole pump.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Hayward pump models does this seal assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThe SPX1500KA was manufactured to match seal dimensions and mounting for many Power‑Flo families. It explicitly fits Power‑Flo Matrix SP1590 and Power‑Flo LX SP1580 model lines, most SP1500 series pumps and strainer models, plus Power‑Flo II SP1700 variants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePower‑Flo Matrix: SP1591, SP1592, SP1593, SP1575LX, SP1580, SP1580X15, SP1520UN, EP1500LX, SP1680\u003c\/li\u003e\n  \u003cli\u003ePower‑Flo \/ SP1500 series: SP1500, SP1510, SP1511, SP1550, SP1575, EP1500, SP1516\u003c\/li\u003e\n  \u003cli\u003ePower‑Flo II \/ SP1700 series: SP1705, SP1710, SP1711, SP1720, SP1725, SP1750, SP1775, SP1780\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know when the seal assembly needs replacement?\u003c\/h3\u003e\n\u003cp\u003eCommon signs are visible leakage near the motor shaft, reduced pump prime, or unusual motor and bearing noise caused by water intrusion. If you spot moisture inside the pump housing or find the pump running less efficiently, replacing the seal assembly is a recommended preventive repair.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVisible water drips around the motor coupling or front housing\u003c\/li\u003e\n  \u003cli\u003eLoss of prime or decreased flow rate\u003c\/li\u003e\n  \u003cli\u003eGrinding or humming sounds from the motor area indicating shaft wear\u003c\/li\u003e\n  \u003cli\u003eRoutine maintenance intervals after several seasons of operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and what should I expect during installation?\u003c\/h3\u003e\n\u003cp\u003eThe SPX1500KA kit contains the seal components plus the cup required to rebuild the sealing interface; weight is approximately 1.9 pounds. Installation typically requires disassembly of the pump volute and impeller, removal of the old seal and cup, clean mating surfaces, and careful seating of the new parts to ensure a proper, leak-free fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete seal assembly plus cup included for a one‑step replacement\u003c\/li\u003e\n  \u003cli\u003eApproximate pack weight: 1.9 pounds for shipping and handling reference\u003c\/li\u003e\n  \u003cli\u003eBasic tools required: socket\/hex set, screwdrivers, lubricant for O‑rings, clean cloth\u003c\/li\u003e\n  \u003cli\u003eRecommended: inspect shaft and bearings while pump is open\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this seal work as a DIY fix or should a pro install it?\u003c\/h3\u003e\n\u003cp\u003eMany homeowners with basic mechanical skills can replace the seal assembly using common hand tools and following the pump manual; however, if the motor shaft or bearings are corroded or damaged, professional service is advisable. Proper alignment, clean surfaces, and correct seating are essential to avoid premature failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for do‑it‑yourselfers comfortable with pump disassembly\u003c\/li\u003e\n  \u003cli\u003eSeek professional help if shaft or bearing damage is suspected\u003c\/li\u003e\n  \u003cli\u003eFollow Hayward service manual guidance for torque and alignment\u003c\/li\u003e\n  \u003cli\u003eKeep spare O‑rings and lubricant on hand for a smooth replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Hayward SPX1500KA seal assembly with cup is intended for pool owners, service technicians, and maintenance professionals who operate Hayward Power‑Flo pumps and need an exact-fit replacement to stop leaks and extend pump life. It’s particularly useful for those maintaining SP1500, SP1580, SP1590 or SP1700 series pumps who want an OEM-compatible sealing repair without replacing the entire pump unit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does SPX1500KA include the seal cup?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes the seal assembly plus the cup for a complete replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this on SP1500 and SP1700 series pumps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s compatible with many SP1500, SP1590, SP1580 and SP1700 series models listed on the product.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":56798873125204,"sku":"B004VTGX52","price":64.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hayward-seal-assembly-front-view.jpg?v=1786727569"},{"product_id":"polaris-pool-cleaner-parts-bundle-9-100-3105-superbag-slip-on-tail-scrubber-dual-chamber-no-tool-install","title":"Polaris Pool Cleaner Parts Bundle 9-100-3105 Superbag \u0026 Slip-On Tail Scrubber — Dual-Chamber, No-Tool Install","description":"\u003cp\u003e\u003cstrong\u003ePolaris Genuine Parts Bundle 9-100-3105 is an authentic replacement kit that refreshes your Polaris automatic cleaner with a dual-chamber superbag and a slip-on tail scrubber for reliable debris capture and reduced hose wear.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your Polaris pool cleaner running efficiently by replacing worn consumables with parts built to the original factory specifications. This bundle combines the 39-310 All-Purpose Superbag — featuring a dual-chamber design and proprietary zipper enclosures — with the 9-100-3105 sweep hose tail scrubber that slips on without tools. Together they restore cleaning performance, limit debris escape, and reduce impact wear on the sweep hose so the unit continues to pick up leaves, sand and small debris.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the superbag improve debris collection?\u003c\/h3\u003e\n\u003cp\u003eThe 39-310 All-Purpose Superbag is engineered with two separate chambers and a zipper enclosure for each, which helps trap different sizes of debris and keeps them secured during the cleaning cycle. Its design reduces the chance of clogging and makes emptying quick and tidy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual chambers separate fine and coarse debris for more efficient capture\u003c\/li\u003e\n  \u003cli\u003eProprietary zipper enclosures prevent accidental spills during retrieval\u003c\/li\u003e\n  \u003cli\u003eMade to Polaris factory specifications for a precise fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the tail scrubber protect my sweep hose and pool surface?\u003c\/h3\u003e\n\u003cp\u003eThe slip-on tail scrubber gently agitates dirt from crevices while cushioning the hose's end, which lowers direct impact against the pool surface and reduces friction-related wear. It helps maintain sweep hose longevity and can improve consistent contact with the pool floor for better cleaning coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo-tool installation — slides easily onto the sweep hose end\u003c\/li\u003e\n  \u003cli\u003eSoft, flexible construction minimizes abrasion and impact\u003c\/li\u003e\n  \u003cli\u003eHelps reduce replacement frequency of the sweep hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Polaris models are compatible with this parts bundle?\u003c\/h3\u003e\n\u003cp\u003eThis genuine Polaris bundle fits a range of classic Polaris cleaners and is designed to match original equipment specifications for proper performance. Included parts work with multiple 280-series models and several other Polaris units, ensuring a wide compatibility range for older and contemporary cleaners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Polaris 280, 280 Tank Trax, 280 Black Max\u003c\/li\u003e\n  \u003cli\u003eWorks with TR28P and 480 Pro models\u003c\/li\u003e\n  \u003cli\u003eIdeal for owners seeking factory-fit replacements for common Polaris cleaners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eBoth components are designed for easy, do-it-yourself replacement so you can get your cleaner back in service quickly. The superbag zips closed for clean emptying, and the scrubber clips on the hose end without tools—no special skills required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free scrubber installation in seconds\u003c\/li\u003e\n  \u003cli\u003eZippered superbag simplifies debris removal and inspection\u003c\/li\u003e\n  \u003cli\u003eRoutine swapping helps sustain peak cleaner efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners and service professionals who already use Polaris automatic cleaners and want genuine OEM replacements to restore original pickup performance, prevent debris escape, and extend sweep hose life. If you own a compatible Polaris model and prefer factory-made parts for reliable fit and long-term performance, this bundle is built to meet those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the bundle fit Polaris 280 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits Polaris 280, 280 Tank Trax, and 280 Black Max models, plus TR28P and 480 Pro.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation tool-free?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the tail scrubber slides on without tools and the superbag zips closed for easy handling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":56798884725076,"sku":"B0DKTTXY7V","price":72.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/polaris-bundle-front-packaging.jpg?v=1786727619"},{"product_id":"hayward-axv551p-6-wheel-replacement-kit-for-above-ground-pool-cleaners-oem-compatible-easy-diy-install","title":"Hayward AXV551P 6-Wheel Replacement Kit for Above-Ground Pool Cleaners — OEM-Compatible, Easy DIY Install","description":"\u003cp\u003e\u003cstrong\u003eThe Hayward AXV551P Wheel Kit is a direct replacement wheel and axle set designed to restore mobility to compatible Hayward above-ground pool cleaners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a pool cleaner’s wheels wear down, the unit can stall, track unevenly, or leave areas uncleaned. The AXV551P kit supplies six replacement wheels and the necessary axles so you can return your Aquabug, Diver Dave, Wanda the Whale, or Aquadroid cleaner to smooth operation without buying a new cleaner. The parts are OEM-compatible and sized to match the original equipment, making installation straightforward for most DIYers.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Hayward models will this wheel kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe AXV551P is built to match several Hayward above-ground cleaner families. It fits Aquabug and Diver Dave models 500 and 700, and it also suits Wanda the Whale and Aquadroid model 900 cleaners. Always confirm part numbers on your existing wheels or the cleaner manual before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Aquabug 500 \u0026amp; 700\u003c\/li\u003e\n  \u003cli\u003eCompatible: Diver Dave 500 \u0026amp; 700\u003c\/li\u003e\n  \u003cli\u003eCompatible: Wanda the Whale model 900\u003c\/li\u003e\n  \u003cli\u003eCompatible: Aquadroid model 900\u003c\/li\u003e\n  \u003cli\u003eIncludes six wheels plus matching axles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install the replacement wheels?\u003c\/h3\u003e\n\u003cp\u003eInstallation is generally quick and requires only basic hand tools. The axles slide into position and secure the wheel halves, so most owners can complete the swap in under 20 minutes. If you encounter rusted fasteners or brittle parts, gentle penetrating oil and patience will help.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical installation time: 10–20 minutes\u003c\/li\u003e\n  \u003cli\u003eTools needed: screwdriver or pliers, possibly penetrating oil\u003c\/li\u003e\n  \u003cli\u003eTip: remove old axle halves before fitting new wheels\u003c\/li\u003e\n  \u003cli\u003eDIY-friendly: no specialized equipment required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and what are the physical details?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with six wheels and the matching axles required for secure attachment. The combined package weight is about 2 pounds, which makes it easy to store and ship. Components are manufactured to match the original dimensions so tread, diameter, and axle placement align with existing housings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 6 wheels plus axles\u003c\/li\u003e\n  \u003cli\u003eWeight: approximately 2 pounds\u003c\/li\u003e\n  \u003cli\u003eDesign: OEM-compatible form and fit\u003c\/li\u003e\n  \u003cli\u003eMaterial: durable plastic intended for pool conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill replacing the wheels improve my cleaner’s performance?\u003c\/h3\u003e\n\u003cp\u003eWorn or damaged wheels can cause poor traction, erratic movement, and missed spots along walls and floors. Fresh wheels restore designed rolling behavior, helping the cleaner maintain consistent steering and coverage. While wheel replacement fixes mobility issues, inspect other wear items (belts, skirts, hoses) for a full performance refresh.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores smoother rolling and tracking\u003c\/li\u003e\n  \u003cli\u003eHelps reduce missed areas and stalling\u003c\/li\u003e\n  \u003cli\u003ePairs well with replacing other worn parts\u003c\/li\u003e\n  \u003cli\u003eImproves reliability without replacing the entire unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Hayward AXV551P Wheel Kit is intended for pool owners and service technicians who maintain Hayward above-ground automatic cleaners and want a cost-effective way to extend the life of those units. It’s an especially good choice if your cleaner shows visible wheel wear, noisy operation, or uneven movement. If you’re unsure about compatibility, check your cleaner model and part numbers or consult Hayward documentation before ordering. This kit provides OEM-compatible components for straightforward repairs and continued pool-cleaning performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the AXV551P include axles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit contains six replacement wheels and the matching axles needed for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these wheels on in-ground cleaners?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit is designed for specific Hayward above-ground cleaner models listed by Hayward, not in-ground units.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":56798906450260,"sku":"B004VTH4MS","price":75.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hayward-axv551p-front-packaging.jpg?v=1786727728"},{"product_id":"baker-hydro-hydropak-pool-spa-skimmer-lid-51b1017-beige-oem-replacement-weather-resistant","title":"Baker Hydro HydroPak Pool \u0026 Spa Skimmer Lid 51B1017 — Beige OEM Replacement, Weather-Resistant","description":"\u003cp\u003e\u003cstrong\u003eThe Baker Hydro 51B1017 HydroPak Pool \u0026amp; Spa Beige Skimmer Lid is a direct replacement cover designed to fit the HydroPak skimmer filter housing and restore a neat, functional pool or spa opening.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your HydroPak skimmer lid is cracked, faded, or missing, replacing it with the correct part keeps the skimmer sealed, prevents debris intrusion, and maintains a tidy pool deck appearance. This beige lid is sold as the specific OEM component for Baker Hydro HydroPak skimmer systems so you get a correct fit and finish without adapting or modifying the housing.\u003c\/p\u003e\n\n\u003ch3\u003eWill this lid fit my HydroPak skimmer?\u003c\/h3\u003e\n\u003cp\u003eThe 51B1017 lid is the OEM replacement made for Baker Hydro HydroPak skimmer filters. It’s intended to match the original factory dimensions and mounting points so installation is straightforward without additional parts. Always compare the part number and the skimmer model before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM part number: 51B1017 for HydroPak skimmer units\u003c\/li\u003e\n  \u003cli\u003eBeige color matches many factory-installed housings\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct swap with original lid sizing and mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install the replacement lid?\u003c\/h3\u003e\n\u003cp\u003eInstallation is simple and typically requires no tools beyond basic hand tightening for any fasteners. The lid sits into the skimmer opening and secures using the existing latch or screw points provided on your skimmer housing. If your original screws or clips are missing, replacement hardware is inexpensive and commonly available.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop-in placement aligns with factory mounting points\u003c\/li\u003e\n  \u003cli\u003eSecure with existing screws or compatible fasteners\u003c\/li\u003e\n  \u003cli\u003eNo special adhesives or modifications needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish does the lid have?\u003c\/h3\u003e\n\u003cp\u003eThe lid is molded in weather-resistant plastic with a beige finish to blend with many pool decks and spa surrounds. Its construction is intended to resist routine outdoor exposure and maintain a clean appearance on the skimmer opening. Regular cleaning and basic seasonal care will help preserve the color and function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMolded plastic construction for outdoor use\u003c\/li\u003e\n  \u003cli\u003eBeige finish for neutral visual integration\u003c\/li\u003e\n  \u003cli\u003eEasy-to-clean surface to reduce staining and buildup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain or clean the skimmer lid?\u003c\/h3\u003e\n\u003cp\u003eMaintenance is minimal: rinse the lid with fresh water and mild soap when dirt or residue accumulates, and inspect for cracks or wear during seasonal service. Replace the lid promptly if you notice structural damage that could allow debris into the skimmer or compromise safety on the pool deck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRinse with fresh water and mild detergent as needed\u003c\/li\u003e\n  \u003cli\u003eCheck fasteners and sealing surfaces periodically\u003c\/li\u003e\n  \u003cli\u003eReplace when cracked, warped, or no longer fitting snugly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool and spa owners, maintenance professionals, and replacement-parts suppliers who use Baker Hydro HydroPak skimmers and need an exact OEM beige skimmer lid. If you require a neat, reliable replacement that fits original mounting points and preserves your skimmer’s appearance and function, this 51B1017 lid provides a simple, correct solution without modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this the original OEM lid for HydroPak skimmers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 51B1017 is the Baker Hydro OEM replacement made specifically for HydroPak skimmer housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the lid myself without tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installs require only hand-tightening of existing fasteners; basic tools may be needed if screws are missing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Baker Hydro","offers":[{"title":"Default Title","offer_id":56798913921364,"sku":"B00LUYNY5I","price":67.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/baker-hydro-hydropak-beige-skimmer-lid-front.jpg?v=1786727765"},{"product_id":"pentair-cpvc-2-inch-2-way-diverter-valve-263027-chemical-resistant-150-psi-with-fiberglass-handle","title":"Pentair CPVC 2-Inch 2-Way Diverter Valve — 263027, Chemical-Resistant 150 PSI with Fiberglass Handle","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair 263027 is a 2-inch CPVC two-way diverter valve built to redirect, shut off, or mix flow in pool and spa plumbing with high chemical and pressure resistance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered for commercial and residential pool and spa systems, this compact diverter provides reliable flow control where corrosion resistance and durability matter. Constructed from CPVC and fitted with a fiberglass-reinforced handle, the valve tolerates harsh pool chemicals and delivers consistent operation under high pressure. Its two-inch size mates with standard pool plumbing, and field-adjustable stops let you orient the inlet and outlets to suit tight installations without custom fittings.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this valve perform under pool chemical exposure and pressure?\u003c\/h3\u003e\n\u003cp\u003eThe 263027 uses CPVC body materials selected for resistance to common pool and spa sanitizers and circulating chemicals. Rated to handle pressures up to 150 PSI, it maintains integrity in pressurized lines without premature degradation or leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCPVC construction resists chlorinated and brominated water chemistry\u003c\/li\u003e\n  \u003cli\u003e150 PSI pressure rating suitable for most pool plumbing systems\u003c\/li\u003e\n  \u003cli\u003eSeals and internal components selected for long-term chemical compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install it in different piping orientations and configurations?\u003c\/h3\u003e\n\u003cp\u003eYes — the valve includes field-adjustable stop positions, allowing the inlet to be plumbed at any of the ports. This flexibility reduces the need for additional elbows or rerouting, making it easier to fit into retrofit or new-build layouts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable stops let you choose inlet orientation on site\u003c\/li\u003e\n  \u003cli\u003eWorks as a diverter, shut-off, or mixing valve without extra adapters\u003c\/li\u003e\n  \u003cli\u003eStandard 2-inch diameter fits commonly used pool plumbing sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat about durability and maintenance needs?\u003c\/h3\u003e\n\u003cp\u003eThe valve is designed for maintenance-free operation under normal pool service conditions, featuring a robust handle and internal design that minimize service interventions. The fiberglass-reinforced handle offers strength and wear resistance for repeated valve actuations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFiberglass-reinforced handle for long life and reliable torque\u003c\/li\u003e\n  \u003cli\u003eSimple internal design reduces common failure points\u003c\/li\u003e\n  \u003cli\u003eNo routine maintenance required beyond standard system inspections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat plumbing tasks is this diverter best suited for?\u003c\/h3\u003e\n\u003cp\u003eUse the Pentair 263027 whenever you need to route water between two pathways, isolate a line, or blend flows in pool and spa systems. It’s ideal for equipment pads, automation manifolds, heater bypasses, and features where compact, chemical-resistant flow switching is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDivert water between filtration, heater, or spa circuits\u003c\/li\u003e\n  \u003cli\u003eTemporarily shut off lines for maintenance or winterization\u003c\/li\u003e\n  \u003cli\u003eMix return flows for temperature balancing or system bypass\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair 263027 suits pool professionals, installers, and skilled DIYers who need a compact, chemically resistant two-way diverter for 2-inch pool and spa plumbing. It’s particularly helpful in installations that demand reliable performance under aggressive chemical conditions, easy field orientation, and a durable handle to withstand frequent use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size pipes does the Pentair 263027 fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is a standard 2-inch diverter valve designed for 2-inch pool and spa plumbing connections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the valve resistant to pool chemicals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CPVC construction and compatible internal parts resist common pool and spa chemicals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":56798942298452,"sku":"B004VU89NU","price":70.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/pentair-263027-front-view.jpg?v=1786727888"},{"product_id":"trane-oem-val09029-j-series-slow-opening-24v-gas-valve-1-2-npt-replacement-for-ad-au-furnaces","title":"Trane OEM VAL09029 J-Series Slow-Opening 24V Gas Valve 1\/2\" NPT Replacement for AD\/AU Furnaces","description":"\u003cp\u003e\u003cstrong\u003eThe Trane VAL09029 is an OEM ServiceFirst \"J\" Series slow-opening gas valve (24V, 1\/2\" inlet\/outlet) designed to replace original Trane and American Standard valves in compatible furnaces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis factory-equivalent gas valve restores controlled fuel flow for many Trane and American Standard furnace models. Built to the same specifications as the original part, it supports a slow-opening action and 24-volt control for reliable ignition performance. If your furnace lists any of the superseded part numbers or appears in the AD\/AU model lists, this valve is a direct-fit option that keeps systems operating to manufacturer intent.\u003c\/p\u003e\n\n\u003ch3\u003eWhich furnaces and part numbers is the VAL09029 compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis valve replaces several legacy part numbers and is commonly installed in a wide range of AD- and AU-series Trane and American Standard furnaces. Check your furnace model and serial details before ordering to confirm fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces VAL4854, VAL-4854, VAL04854, VAL6968, VAL-6968, VAL06968, VAL-9029, VAL9029, VAL07732, VAL-7732, VAL7732.\u003c\/li\u003e\n  \u003cli\u003eCommon in AD models such as ADC040C924B8, ADC060C936BA, ADC100C948BA and many ADD-series models.\u003c\/li\u003e\n  \u003cli\u003eCommon in AU models including AUD1B060A9361AA, AUD1B080A9481AA, AUD1C100A9601AA among others.\u003c\/li\u003e\n  \u003cli\u003eRefer to model lists or your furnace serial plate; older 80% furnaces (040 \u0026amp; 060) with serial 9011 or older may need an additional kit (COV04012) for first-time change-out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this valve perform and what are the key specifications?\u003c\/h3\u003e\n\u003cp\u003eThe VAL09029 is a slow-opening gas valve that uses a 24-volt control signal and 50\/60 Hz power compatibility. It features 1\/2\"-14 NPT inlet and outlet fittings and is built to meet OEM tolerances for safe, predictable operation when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eType: Gas, slow opening\u003c\/li\u003e\n  \u003cli\u003eVoltage: 24V AC control, 50\/60 Hz compatible\u003c\/li\u003e\n  \u003cli\u003eConnections: 1\/2\"-14 NPT inlet and outlet\u003c\/li\u003e\n  \u003cli\u003eSeries: \"J\" Series OEM ServiceFirst component\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and compatibility notes?\u003c\/h3\u003e\n\u003cp\u003eInstallation should be performed by a qualified HVAC technician following manufacturer procedures and local codes. Some furnace variants require an additional conversion or mounting kit for a proper retrofit, so verify your serial number and model designation first.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFor first-time replacements on certain 80% 040 \u0026amp; 060 furnaces (serial 9011 or older), order COV04012 as well.\u003c\/li\u003e\n  \u003cli\u003eUse KIT09419 where indicated for specific superseded installs.\u003c\/li\u003e\n  \u003cli\u003eConfirm electrical connections, gas piping torque, and leak testing after installation.\u003c\/li\u003e\n  \u003cli\u003eImages on listings are illustrative; the physical item may differ slightly from photos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: The VAL09029 is intended for HVAC professionals, service technicians and experienced DIYers maintaining Trane or American Standard furnaces that list the compatible AD\/AU models or superseded part numbers. Choose this OEM replacement when you need a factory-equivalent gas valve to restore correct gas metering and slow-opening functionality in compatible systems; if you are unsure about compatibility, consult your furnace documentation or a certified technician before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the VAL09029 fit my Trane\/American Standard furnace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your furnace model and serial plate against the AD\/AU model lists and superseded part numbers; contact a technician if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is any additional part required for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Certain older 80% 040\/060 furnaces (serial 9011 or older) require COV04012; some installs use KIT09419. Verify before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Trane","offers":[{"title":"Default Title","offer_id":56798963138900,"sku":"B0716J17MX","price":75.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/trane-val09029-front-view.jpg?v=1786727988"},{"product_id":"arrogantf-pool-heater-replacement-transformer-for-pentair-42001-0107-dual-voltage-26vac","title":"ArrogantF Pool Heater Replacement Transformer for Pentair 42001-0107, Dual-Voltage 26VAC","description":"\u003cp\u003e\u003cstrong\u003eArrogantF's replacement transformer is a tested, drop-in dual-voltage unit that converts 120\/240V input to 26VAC output for Pentair MasterTemp and Sta‑Rite heater electrical systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pool or spa heater's control circuitry needs a new low-voltage supply, this ArrogantF kit is engineered as a compatible replacement for Pentair part 42001-0107. The assembly supports both 120V and 240V mains and delivers a stable 26VAC secondary to power control boards and gas valves. Every transformer is quality-checked before shipment to meet or exceed typical OEM expectations, and the kit includes a short warranty window and customer support should installation questions arise.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this transformer fit my Pentair or Sta‑Rite heater?\u003c\/h3\u003e\n\u003cp\u003eThe unit is designed specifically to match the mounting footprint and electrical connections commonly found in Pentair MasterTemp and Sta‑Rite Max‑E‑Therm systems. It replaces Pentair 42001‑0107 and aligns with the heater’s low-voltage control wiring, minimizing modification. Before removing the old part, visually note wire positions and take a photo so you can reconnect correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for Pentair MasterTemp and Sta‑Rite Max‑E‑Therm models\u003c\/li\u003e\n  \u003cli\u003eCompatible with OEM mounting points and connector layout\u003c\/li\u003e\n  \u003cli\u003eReplaces Pentair part number 42001‑0107\u003c\/li\u003e\n  \u003cli\u003eRecommended: document original wiring before disconnecting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical specifications and performance can I expect?\u003c\/h3\u003e\n\u003cp\u003eThis transformer accepts either 120VAC or 240VAC on the primary side and provides a 26VAC secondary output suitable for heater control circuits. It is bench‑tested at the factory to ensure correct voltage and stable operation under normal load conditions. Using the correct input voltage and secure connections helps maintain reliable heater control and ignition sequences.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrimary input: 120\/240 VAC selectable\u003c\/li\u003e\n  \u003cli\u003eSecondary output: 26 VAC for control circuits\u003c\/li\u003e\n  \u003cli\u003eFactory tested to verify output and reliability\u003c\/li\u003e\n  \u003cli\u003eDesigned for typical pool and spa heater electrical loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what safety steps should I follow?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for someone comfortable with basic electrical work; many users report being able to replace the transformer and reconnect the circuit without specialized tools. Always disconnect power at the breaker before opening the heater access panel and label or photograph wiring before removal. If you are not confident with household mains electricity, hire a qualified technician to install the part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePower off at the circuit breaker before starting\u003c\/li\u003e\n  \u003cli\u003eLabel or photograph existing wire terminals for correct reconnection\u003c\/li\u003e\n  \u003cli\u003eNo special tools typically required—hand-tighten connections\u003c\/li\u003e\n  \u003cli\u003eContact a licensed electrician for uncertain or complex installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and warranty come with this ArrogantF transformer?\u003c\/h3\u003e\n\u003cp\u003eThe product includes a 90‑day limited warranty covering defects in materials and workmanship, with options for replacement or refund within that period. ArrogantF provides customer service to answer installation questions and troubleshoot common issues, aiming for prompt replies. Retain your order information and photos of the installed part to expedite any warranty request.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e90‑day warranty for replacement or refund\u003c\/li\u003e\n  \u003cli\u003eCustomer support available with response guidance\u003c\/li\u003e\n  \u003cli\u003eKeep receipts and installation photos to speed claims\u003c\/li\u003e\n  \u003cli\u003eWarranty does not cover improper installation or misuse\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool and spa owners, maintenance professionals, and service technicians who need a reliable replacement transformer for Pentair MasterTemp or Sta‑Rite Max‑E‑Therm heaters. This kit suits anyone seeking a tested, compatible 120\/240VAC to 26VAC replacement to restore heater control function quickly, provided basic electrical precautions are observed.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this transformer work with Pentair part 42001-0107?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is a compatible replacement designed to match Pentair 42001‑0107 for MasterTemp heaters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What voltage does the transformer output?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The secondary output is 26VAC; the primary accepts either 120VAC or 240VAC input.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ArrogantF","offers":[{"title":"Default Title","offer_id":56798982308180,"sku":"B0D2H7D7W7","price":91.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/arrogantf-transformer-front-view.jpg?v=1786728085"},{"product_id":"sejaede-piston-shaft-assembly-kit-for-pentair-push-pull-slide-valves-model-263055-corrosion-resistant-direct-fit-replacement","title":"Sejaede piston shaft assembly kit for Pentair push-pull slide valves — model 263055, corrosion-resistant, direct-fit replacement","description":"\u003cp\u003e\u003cstrong\u003eSejaede 263055 Piston shaft assembly kit is a direct-fit replacement for Pentair push-pull slide valves (models 263064, 263052, 263053, 263078, 263079) that restores smooth, leak-free valve action.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Pentair push-pull slide valve is sticking, leaking, or difficult to operate, replacing the piston shaft assembly is a fast way to bring it back to reliable service. This kit contains the complete piston shaft assembly built from corrosion-resistant plastics and stainless components to tolerate pool and spa chemicals and pressure cycles. It’s designed as an OEM-style part for a secure fit—so you can avoid replacing the entire valve body and save time and expense on repairs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit improve valve performance?\u003c\/h3\u003e\n\u003cp\u003eThe piston shaft assembly replaces worn internal parts that cause binding, internal leakage, or inconsistent water flow. Installing a fresh assembly restores the smooth travel of the slide valve and tightens seals to reduce bypass and drip-through.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces worn or corroded piston and shaft components\u003c\/li\u003e\n  \u003cli\u003eRestores proper alignment for smooth push-pull action\u003c\/li\u003e\n  \u003cli\u003eReduces internal leaks and improves water flow control\u003c\/li\u003e\n  \u003cli\u003eDurable materials resist pool chemicals and pressure cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the Sejaede 263055 fit my Pentair valve model?\u003c\/h3\u003e\n\u003cp\u003eThis kit is engineered specifically for compatibility with Pentair push-pull slide valve models 263064, 263052, 263053, 263078, and 263079. No modifications should be necessary when replacing the piston shaft in those listed models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for the listed Pentair models\u003c\/li\u003e\n  \u003cli\u003eOEM-style dimensions for secure installation\u003c\/li\u003e\n  \u003cli\u003eIncludes the complete assembly for a single-step repair\u003c\/li\u003e\n  \u003cli\u003eCheck your valve model number before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward and typically requires only common hand tools. The assembly replaces the internal piston and shaft components so you can return the valve to service without special equipment or professional plumbing work in most cases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple, user-friendly replacement procedure\u003c\/li\u003e\n  \u003cli\u003eNo specialized tools usually required—basic wrenches and screwdrivers suffice\u003c\/li\u003e\n  \u003cli\u003eInstructions or basic familiarity with valve disassembly helpful\u003c\/li\u003e\n  \u003cli\u003eSaves cost versus replacing the entire valve body\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and quality features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe Sejaede 263055 uses high-strength plastic parts plus stainless components at critical points to resist corrosion and wear from pool and spa environments. The materials are selected to withstand chemical exposure and pressure fluctuations for extended service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant plastics for long-term durability\u003c\/li\u003e\n  \u003cli\u003eStainless parts where strength and corrosion resistance matter\u003c\/li\u003e\n  \u003cli\u003eOEM-style tolerances for reliable sealing and movement\u003c\/li\u003e\n  \u003cli\u003eManufactured to restore valve function and reduce maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool and spa owners, service technicians, and DIY installers who need a reliable, cost-effective repair for Pentair push-pull slide valves. If you own one of the listed Pentair models and your valve is sticking or leaking, the Sejaede 263055 piston shaft assembly kit offers a direct replacement to restore smooth operation without replacing the entire valve.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit Pentair models 263064 and 263052?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Sejaede 263055 is designed specifically to fit Pentair push-pull slide valve models 263064 and 263052 without modifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the piston shaft assembly myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: For most users, yes. Installation typically uses basic hand tools and restores valve function without special equipment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sejaede","offers":[{"title":"Default Title","offer_id":56799039390036,"sku":"B0FD9SVV2M","price":68.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/sejaede-263055-front-packaging.jpg?v=1786728467"},{"product_id":"byenins-1-hayward-multiport-valve-key-cover-handle-assembly-spx0710xba17-with-gasket-o-ring-black-resin","title":"Byenins 1½\" Hayward Multiport Valve Key Cover \u0026 Handle Assembly SPX0710XBA17 with Gasket \u0026 O‑Ring, Black Resin","description":"\u003cp\u003e\u003cstrong\u003eByenins SPX0710XBA17 is an aftermarket key cover and handle assembly designed to replace the OEM part on 1½-inch Hayward multiport valves, supplied with a gasket and O‑ring for a complete seal.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Hayward SPX0710X32 or SP0710X62 valve has a cracked or missing key cover or handle, this direct-fit aftermarket replacement restores control and leak resistance without replacing the entire valve. The assembly is molded from black resin, includes alignment screw holes for straightforward mounting, and ships with the gasket and O‑ring you need to reseal the joint. Note: this part is intended only for 1½-inch pipe applications and will not fit 2‑inch pipe valves or the Vari‑Flow XL series.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this replacement restore a malfunctioning valve?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn key cover and handle returns reliable manual operation to a multiport valve, making it easier to change filter settings and reducing wobble or slippage. The included gasket and O‑ring help eliminate leaks at the connection point once installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for SPX0710X32 and SP0710X62 valve models.\u003c\/li\u003e\n  \u003cli\u003eResin handle and cover reduce corrosion risk compared to metal parts.\u003c\/li\u003e\n  \u003cli\u003eGasket with ribbed side orientation ensures a tight seal when installed properly.\u003c\/li\u003e\n  \u003cli\u003eO‑ring included to prevent seepage around the shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering to ensure compatibility?\u003c\/h3\u003e\n\u003cp\u003eConfirm the multiport valve is the 1½-inch Hayward model listed and not the Vari‑Flow XL or a 2‑inch pipe valve, since fit dimensions differ. Visually compare the screw hole pattern and overall handle shape to your existing part to avoid mismatches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify your valve model number matches SPX0710X32 or SP0710X62.\u003c\/li\u003e\n  \u003cli\u003eMeasure pipe diameter to ensure it is 1½ inches, not 2 inches.\u003c\/li\u003e\n  \u003cli\u003eCompare the 6‑hole screw alignment to your current cover for fit accuracy.\u003c\/li\u003e\n  \u003cli\u003eInspect valve top for Vari‑Flow XL labeling — this part will be too small for that series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic pool equipment maintenance. You’ll need common hand tools and about 15–30 minutes; careful gasket orientation is essential to prevent leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: Phillips screwdriver, lubricant for O‑ring (silicone recommended), and a rag.\u003c\/li\u003e\n  \u003cli\u003eRemove six screws, lift old cover, replace gasket with ribs facing upward.\u003c\/li\u003e\n  \u003cli\u003eSeat new O‑ring and align the screw holes before tightening evenly.\u003c\/li\u003e\n  \u003cli\u003eTest valve positions and check for leaks after first brief run of the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance tips help prolong the life of this part?\u003c\/h3\u003e\n\u003cp\u003eRoutine checks and gentle handling extend the lifespan of the plastic cover and gasket assembly. Replacing the gasket and O‑ring whenever you service the valve prevents common leak points and keeps the handle operating smoothly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect the gasket\/o‑ring annually and replace if hardened or cracked.\u003c\/li\u003e\n  \u003cli\u003eAvoid excessive force when shifting the handle between settings.\u003c\/li\u003e\n  \u003cli\u003eClean valve surfaces before seating the new gasket to ensure a uniform seal.\u003c\/li\u003e\n  \u003cli\u003eUse silicone-based lubricant on the O‑ring to prevent drying and cracking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners, service technicians, and DIYers looking for a cost‑effective replacement to restore manual control on 1½-inch Hayward multiport valves. Choose this Byenins aftermarket assembly if you need a like‑for‑like fit for SPX0710X32 or SP0710X62 models, want a simple install with included gasket and O‑ring, and do not require parts for 2‑inch pipe valves or Vari‑Flow XL series.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Hayward Vari-Flow XL valve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Byenins assembly is too small for Vari‑Flow XL models and only fits 1½-inch valve bodies listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the gasket and O‑ring included and replaceable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a gasket and O‑ring; replace them during installation and orient gasket ribs upward.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Byenins","offers":[{"title":"Default Title","offer_id":56799083397460,"sku":"B083LSKT93","price":66.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/byenins-front-packaging-key-cover-handle.jpg?v=1786728677"},{"product_id":"menkxi-dual-split-pool-hose-plunger-valve-gray-1-5-x-59-in-with-3-hoses-2-in-1-control-fits-1-25-1-5-in","title":"Menkxi Dual Split Pool Hose Plunger Valve, Gray 1.5 x 59 in with 3 Hoses — 2-in-1 Control, Fits 1.25\/1.5 in","description":"\u003cp\u003e\u003cstrong\u003eThe Menkxi Dual Split Swimming Pool Hose Plunger Valve is a 2-in-1 plastic split valve with a top plunger control and three 1.5\" x 59\" replacement hoses, designed to route and regulate water flow for most above-ground pool filter pumps.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit combines a split connector and three pre-cut hoses to let you divert suction, reduce pump intake on one branch, or temporarily close an outlet without swapping fittings. Made from impact-resistant plastic with an elastic rubber seal, the assembly is built to fit 1.25\" and 1.5\" pool hoses and to integrate with standard clamps or threaded collars. Follow matching-diameter guidance and the threaded-collar seating step to avoid leaks and ensure a reliable seal.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the split plunger valve control two outlets at once?\u003c\/h3\u003e\n\u003cp\u003eThe valve body routes water continuously through the left and right branches while the top plunger opens or closes flow from the lower outlet only. That lets you divert or reduce suction from one side without interrupting the other, useful during vacuuming or altering pump load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-branch design keeps both lateral outlets connected at all times.\u003c\/li\u003e\n  \u003cli\u003eTop plunger isolates or restores the lower outlet as needed.\u003c\/li\u003e\n  \u003cli\u003eWorks for vacuuming tasks or to balance suction between lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my pool hoses and pump connections?\u003c\/h3\u003e\n\u003cp\u003eThe Menkxi valve is engineered for compatibility with 1.25\" and 1.5\" flexible pool hoses common on above-ground filter pumps. It works best when matched hose diameters and the supplied threaded collar are used to secure the connection and avoid leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts standard 1.25\" and 1.5\" hose sizes—no adapter usually required.\u003c\/li\u003e\n  \u003cli\u003eUse clamps or the threaded collar to fix hoses firmly to the connector.\u003c\/li\u003e\n  \u003cli\u003eIf the hose and connector diameters differ, expect leakage unless you use compatible parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the threaded collar to the end of the hose, push the hose onto the split connector fully, then tighten the collar or hose clamp. The lightweight plastic body and rubber sealing ring reduce maintenance; inspect the seal and hose ends seasonally and replace the rubber ring if you detect seepage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlide threaded collar all the way down before attaching the hose to prevent leaks.\u003c\/li\u003e\n  \u003cli\u003eSecure connections with hose clamps for extra reliability.\u003c\/li\u003e\n  \u003cli\u003ePeriodically check the elastic rubber ring and hose condition for wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the material and durability details?\u003c\/h3\u003e\n\u003cp\u003eThe valve is molded from sturdy plastic engineered for pool use and includes an elastic rubber gasket to prevent water escape at connection points. While durable for routine pool operations, longevity depends on UV exposure, chemical balance, and proper installation—replace hoses or seals if cracking appears.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable plastic construction resists routine wear and handling.\u003c\/li\u003e\n  \u003cli\u003eElastic rubber ring provides a primary leak barrier at the joint.\u003c\/li\u003e\n  \u003cli\u003eThree 1.5\" x 59\" hoses included so you can replace or extend lines easily.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners, maintenance techs, and DIYers with above-ground filter pumps who need a compact, cost-effective way to split suction lines, control one outlet without breaking other connections, or swap hoses quickly. Choose this kit if you use 1.25\"\/1.5\" hoses and want an easy-to-install valve with replacement hoses included for routine pool setup, vacuuming tasks, or temporary flow adjustments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this valve handle both 1.25\" and 1.5\" hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Menkxi split plunger valve is designed to accept standard 1.25\" and 1.5\" pool hoses without adapters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the kit prevent leaks right away?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If hoses and connector diameters match and the threaded collar or clamps are tightened fully, the rubber seal prevents most leaks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Menkxi","offers":[{"title":"Default Title","offer_id":56799085723988,"sku":"B0CVGHDZHC","price":96.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/menkxi-front-view-valve-and-hoses.jpg?v=1786728762"},{"product_id":"intermatic-2t2502ga-pool-spa-plastic-enclosure-timer-nema-3r-rainproof-molded-plastic","title":"Intermatic 2T2502GA Pool\/Spa Plastic Enclosure Timer — NEMA 3R Rainproof, Molded Plastic","description":"\u003cp\u003e\u003cstrong\u003eThe Intermatic 2T2502GA is a rainproof, heavy-duty plastic enclosure designed to protect compatible time switch models in outdoor pool and spa installations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to keep time switches safe from moisture, dust and corrosion, this molded enclosure lets you mount popular Intermatic time switch series outdoors without exposing the mechanism to the elements. Its durable industrial-grade plastic construction and NEMA 3R rating provide a weather-resistant housing for pool and spa control equipment, while multiple knockouts allow for neat wiring runs and conduit connections.\u003c\/p\u003e\n\n\u003ch3\u003eWhich time switch models fit inside this enclosure?\u003c\/h3\u003e\n\u003cp\u003eThe 2T2502GA accommodates a range of Intermatic mechanical and electromechanical time switches. It’s sized to accept several common series so you can upgrade weather protection without changing your existing control. Check the specific model compatibility before ordering to confirm a precise fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many T-series and ET-series Intermatic time switches\u003c\/li\u003e\n  \u003cli\u003eWorks with both older and current mechanical models commonly used for pool\/spa control\u003c\/li\u003e\n  \u003cli\u003eSpares installers from replacing the switch when adding outdoor protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is this enclosure?\u003c\/h3\u003e\n\u003cp\u003eManufactured from industrial-grade, molded plastic, the enclosure resists rust and corrosion that can affect metal housings in humid environments. The design meets NEMA 3R outdoor protection standards, giving reliable defense against rain and falling moisture in typical outdoor installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNEMA 3R rating for outdoor exposure and rain protection\u003c\/li\u003e\n  \u003cli\u003eAll-plastic construction prevents rust in coastal or high-humidity settings\u003c\/li\u003e\n  \u003cli\u003eSecurely seals the time switch while allowing adequate ventilation for electronics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wiring and mounting options does it offer?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure includes multiple nominal knockouts sized for common conduit and cable entries, plus mounting provisions for fastening to walls or panels. These features make it straightforward to route supply and control wiring while keeping connections protected from weather and debris.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCombination 0.5\" and 0.75\" nominal knockouts on sides, back and bottom\u003c\/li\u003e\n  \u003cli\u003ePre-formed mounting points for secure wall or surface attachment\u003c\/li\u003e\n  \u003cli\u003eBottom knockouts allow tidy conduit entry for pool and spa wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the enclosure’s dimensions and installation footprint?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is compact enough to fit in typical pool equipment pads while offering internal space for the time switch and wiring. Its footprint balances internal volume for installation with a low-profile external size to help conserve space around filtration and heater components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExternal approximate size keeps installation area compact\u003c\/li\u003e\n  \u003cli\u003eSufficient interior depth to accommodate common Intermatic time switch depths\u003c\/li\u003e\n  \u003cli\u003eLightweight plastic makes positioning and mounting easier for one person\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Intermatic 2T2502GA enclosure is ideal for pool and spa technicians, electricians, and property owners who need a weatherproof housing for existing Intermatic time switches. It’s particularly useful where metal boxes would rust, in coastal or high-humidity installations, or whenever a simple retrofit is needed to bring a timer outdoors without replacing the control itself.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 2T2502GA safe for outdoor pool installations?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is NEMA 3R rated and made from corrosion-resistant plastic for outdoor use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Intermatic timers fit this enclosure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed to house many T-series and ET-series Intermatic time switches, verify your model for fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Intermatic","offers":[{"title":"Default Title","offer_id":56799085855060,"sku":"B004H74IPK","price":92.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/intermatic-front-view-rainproof-enclosure.jpg?v=1786728755"},{"product_id":"sundance-microclean-ultra-ii-inner-filter-for-880-series-6473-453s-white-microfiber-up-to-6-month-life","title":"Sundance MicroClean Ultra II Inner Filter for 880 Series (6473-453S) — White microfiber, up to 6-month life","description":"\u003cp\u003e\u003cstrong\u003eSundance Spas MicroClean Ultra II Filter Inner (6473-453S) is the OEM inner microfiber cartridge designed for Sundance 880 Series 2024+ that captures ultra-fine particles to help keep spa water clear.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement inner cartridge is the 2024 update from Sundance, engineered specifically for use with the MicroClean filtration system in the 880 Series hot tubs. It pairs with the corresponding outer filter (6473-452S) and works with Sundance SPAPURITY mineral sanitizer to reduce debris, oils, and microscopic contaminants. Lightweight and simple to swap, the inner filter focuses on trapping the smallest solids so the mechanical filtration does more of the heavy lifting before chemical sanitizers work.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the MicroClean Ultra II inner filter improve water clarity?\u003c\/h3\u003e\n\u003cp\u003eThe inner filter is made from spun-bound microfiber that captures particles far smaller than standard pleated media. By removing fine solids and organic matter before they circulate, it reduces cloudiness and helps maintain a cleaner surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpun-bound microfiber traps microscopic particulates\u003c\/li\u003e\n  \u003cli\u003eWorks alongside the outer filter for two-stage filtration\u003c\/li\u003e\n  \u003cli\u003ePrevents tiny debris from reaching pump and sanitizer systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace this inner cartridge?\u003c\/h3\u003e\n\u003cp\u003eSundance rates the MicroClean inner cartridge for up to six months of typical use, but actual life depends on bather load, water chemistry and environmental debris. Check the filter every month and replace when you see reduced flow or visible discoloration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical longevity: up to 6 months under normal use\u003c\/li\u003e\n  \u003cli\u003eInspect monthly for clogging, tearing, or staining\u003c\/li\u003e\n  \u003cli\u003eReplace sooner with heavy use, pets, or dusty outdoor locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this filter compatible with my spa and other Sundance products?\u003c\/h3\u003e\n\u003cp\u003eThis 6473-453S inner cartridge is specifically made for the Sundance 880 Series 2024 and newer models and must be used with the matched outer filter 6473-452S. For best performance, pair it with SPAPURITY mineral sanitizer as recommended by Sundance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Sundance 880 Series model year 2024 and later\u003c\/li\u003e\n  \u003cli\u003eDesigned to be used together with outer filter 6473-452S\u003c\/li\u003e\n  \u003cli\u003eRecommended for use with SPAPURITY mineral sanitizer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I change the MicroClean inner cartridge?\u003c\/h3\u003e\n\u003cp\u003eReplacing the inner cartridge is a quick maintenance task: remove the filter from its housing, pull out the old inner element, insert the new MicroClean inner component, and reinstall the filter assembly. No special tools are required, and a routine swap keeps flow rates steady and filtration efficient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off spa circulation before removing filter\u003c\/li\u003e\n  \u003cli\u003ePull out the outer filter, replace inner 6473-453S, then re-seat\u003c\/li\u003e\n  \u003cli\u003eRestart circulation and verify normal flow and no leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Owners of Sundance 880 Series hot tubs (2024 and newer) who want OEM-grade, two-stage filtration to capture very fine particles and protect spa equipment. It's ideal for households that use their spa regularly or want lower maintenance balancing between mechanical filtration and mineral sanitizers. Choose this genuine Sundance inner cartridge if you prefer factory-fit replacements and consistent performance with the SPAPURITY system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this inner filter without the outer 6473-452S?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The MicroClean inner 6473-453S is designed to work with the matching outer filter 6473-452S for proper two-stage filtration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this filter fit older Sundance 880 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This inner cartridge is specified for Sundance 880 Series 2024 and newer; older models may require different filter part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sundance","offers":[{"title":"Default Title","offer_id":56799130321236,"sku":"B0CZ7M2PNH","price":84.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/sundance-filter-front-view.jpg?v=1786729036"},{"product_id":"pentair-whisperflo-diffuser-assembly-replacement-072927-oem-fit-restores-flow-reduces-noise","title":"Pentair WhisperFlo Diffuser Assembly Replacement 072927 — OEM fit, restores flow \u0026 reduces noise","description":"\u003cp\u003e\u003cstrong\u003ePentair 072927 is the direct-replacement diffuser assembly designed to restore optimal flow and efficiency in WhisperFlo inground pool and spa pumps.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your WhisperFlo pump is showing reduced performance, unusual vibration, or leaks around the volute area, replacing the diffuser assembly is a common maintenance step that can bring hydraulic balance back to the system. This OEM Pentair part is sized and molded to match WhisperFlo housings, simplifying installation and helping your pump run more quietly and efficiently when fitted correctly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this diffuser assembly affect pump performance?\u003c\/h3\u003e\n\u003cp\u003eThe diffuser guides water smoothly from the impeller into the volute. A worn or damaged diffuser can create turbulence, increase noise, and lower flow rates; swapping in a new Pentair 072927 returns the intended hydraulic path and reduces those issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores proper impeller-to-volute alignment for steady flow\u003c\/li\u003e\n  \u003cli\u003eReduces internal turbulence that causes noise and vibration\u003c\/li\u003e\n  \u003cli\u003eHelps maintain rated flow and pressure for filtration and heaters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this product compatible with my pump and easy to install?\u003c\/h3\u003e\n\u003cp\u003eThe 072927 diffuser is manufactured to fit WhisperFlo inground pool and spa pumps that use the original-style diffuser assembly. Installation is straightforward for anyone comfortable disassembling the pump wet end: remove the volute or housing, swap the diffuser, and reassemble with proper seals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned as a direct OEM replacement for WhisperFlo models\u003c\/li\u003e\n  \u003cli\u003eWorks with standard WhisperFlo impellers and housings\u003c\/li\u003e\n  \u003cli\u003eInstallation requires basic hand tools and simple reassembly steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the material and shipping specifics I should know?\u003c\/h3\u003e\n\u003cp\u003eThis Pentair diffuser is produced in the United States to the manufacturer’s specifications. The package is lightweight and compact, making it easy to store or refrigerate in a parts bin until installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCountry of origin: United States\u003c\/li\u003e\n  \u003cli\u003ePackage weight: 0.295 kg (approx. 0.65 lb)\u003c\/li\u003e\n  \u003cli\u003ePackage dimensions: 20.32 cm H x 11.43 cm L x 20.32 cm W\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should you replace the diffuser instead of other pump parts?\u003c\/h3\u003e\n\u003cp\u003eReplace the diffuser if you notice decreased flow, excessive cavitation noise, or visible cracks and wear on the diffuser vane surfaces. If the impeller or shaft seal shows damage, those parts should be inspected and replaced as needed; the diffuser replacement often complements those repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace when vanes are cracked, eroded, or clogged with debris\u003c\/li\u003e\n  \u003cli\u003ePair replacement with impeller or seal checks for best results\u003c\/li\u003e\n  \u003cli\u003eRegular inspection during seasonal service helps prevent failures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool service professionals, DIY pool owners, and maintenance shops that service Pentair WhisperFlo inground pumps will find the 072927 diffuser assembly useful for restoring pump balance and efficiency. If you own a WhisperFlo pump model that specifies the Pentair 072927 diffuser, this OEM replacement simplifies repairs and reduces downtime by matching original fit and function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this diffuser fit my WhisperFlo inground pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Pentair 072927 is an OEM replacement for WhisperFlo inground pump models that use the original diffuser design.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the 072927 diffuser?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required; basic hand tools and careful disassembly\/reassembly of the pump wet end are sufficient.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":56799211389268,"sku":"B004VTH86A","price":84.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/pentair-diffuser-assembly-front-view.jpg?v=1786729475"},{"product_id":"makhoon-g62-backup-valve-kit-for-polaris-zodiac-pool-cleaners-black-direct-fit-complete-assembly","title":"MAKHOON G62 Backup Valve Kit for Polaris \u0026 Zodiac Pool Cleaners — Black, Direct-Fit Complete Assembly","description":"\u003cp\u003e\u003cstrong\u003eMAKHOON G62 Complete Backup Valve Kit is a direct-fit replacement assembly (case G54 plus internal mechanism G53) engineered for Polaris and Zodiac pressure-side pool cleaners to restore reliable one-way valve performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a pressure-side cleaner begins to stall, backtrack, or fail to build proper pressure, the backup valve assembly is often the culprit. This MAKHOON kit replaces the entire black backup valve G62 used on Polaris Zodiac 280, 380, 3900 Sport, 280 Black Max F5B and TR35P models. It ships as a single, ready-to-install unit so you can swap the worn or damaged valve quickly and get your cleaner moving again.\u003c\/p\u003e\n\n\u003ch3\u003eHow will swapping to the MAKHOON G62 kit affect my cleaner’s performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn backup valve helps the cleaner maintain consistent pressure and prevents reverse airflow that causes stalling or slow movement. Customers typically notice improved circulation and fewer obstructions once the valve has been replaced.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores proper one-way pressure control for efficient drive cycles\u003c\/li\u003e\n  \u003cli\u003eReduces occurrences of the cleaner getting stuck or losing suction\u003c\/li\u003e\n  \u003cli\u003eHelps maintain intended sweep patterns and coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the G62 kit easy to install and what’s included?\u003c\/h3\u003e\n\u003cp\u003eThe MAKHOON kit comes complete with the backup valve case (G54) and the internal mechanism (G53), so no separate parts are required. Installation is straightforward for anyone comfortable with basic pool cleaner maintenance and requires only common hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete assembly (G62) — no extra components needed\u003c\/li\u003e\n  \u003cli\u003eFits directly in the designated valve location for listed models\u003c\/li\u003e\n  \u003cli\u003eQuick swap process: remove old valve, seat new kit, reattach housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich pool cleaner models are compatible with this replacement valve?\u003c\/h3\u003e\n\u003cp\u003eThis MAKHOON backup valve is engineered to fit a range of Polaris and Zodiac pressure-side units. Confirm model compatibility before ordering to ensure a proper fit and operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Polaris Zodiac 280, 380, 3900 Sport\u003c\/li\u003e\n  \u003cli\u003eAlso fits: 280 Black Max F5B and TR35P pressure-side cleaners\u003c\/li\u003e\n  \u003cli\u003eNot intended for suction-side cleaners or unrelated brands\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I troubleshoot after installing the G62 if problems persist?\u003c\/h3\u003e\n\u003cp\u003eIf the cleaner still struggles after installing the new valve, inspect hoses, fittings and the skimmer \/ booster pump for blockages or leaks. Proper water flow and hose integrity are essential for the valve to function as designed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck hose sections for punctures, kinks, or collapsed areas\u003c\/li\u003e\n  \u003cli\u003eVerify booster pump and filter pressures are within manufacturer specs\u003c\/li\u003e\n  \u003cli\u003eConfirm valve is fully seated and secured with no loose seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The MAKHOON G62 Complete Backup Valve Kit is for pool owners and service technicians who operate Polaris Zodiac pressure-side cleaners and need a reliable, full replacement valve assembly. It’s ideal if your cleaner is reversing, losing drive pressure, or getting stuck frequently. The kit is sold as a single black G62 assembly (case G54 plus mechanism G53) and comes with seller support for replacements or questions. If you want to restore consistent cleaning cycles without sourcing multiple parts, this plug-and-play unit is designed to get you back to maintenance with minimal downtime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this G62 kit fit my Polaris 280 Black Max?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The MAKHOON G62 is compatible with Polaris 280 Black Max F5B and listed Zodiac models. Verify your model number before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include all parts needed for replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The G62 kit includes the backup valve case (G54) and internal mechanism (G53) as a single assembly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MAKHOON","offers":[{"title":"Default Title","offer_id":56799214272852,"sku":"B09Y9BGLLW","price":72.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/makhoon-g62-front-view.jpg?v=1786729540"},{"product_id":"amptyhub-backup-valve-9-100-1200-for-polaris-360-upgraded-reinforced-polymer-with-g53-pom-gear","title":"Amptyhub Backup Valve 9-100-1200 for Polaris 360 — Upgraded Reinforced Polymer with G53 POM Gear","description":"\u003cp\u003e\u003cstrong\u003eThe Amptyhub 9-100-1200 backup valve is a reinforced replacement part engineered to restore reliable cycling for Polaris 360 and Vac-Sweep 360 pool cleaners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Polaris 360 has lost its rhythmic movements or stalls while cleaning, a worn or damaged backup (in-line) valve is a common cause. Amptyhub redesigned this valve using a crack-resistant polymer shell and a durable G53 POM gear train to resist wear and extend service life compared with earlier models. It replaces the Zodiac\/Polaris 9-100-1200 valve for the Polaris 360 and Vac-Sweep 360 units (not compatible with Polaris 280 or 380).\u003c\/p\u003e\n\n\u003ch3\u003eHow will this upgraded valve affect my Polaris 360’s performance?\u003c\/h3\u003e\n\n\u003cp\u003eInstalling this reinforced valve restores the alternating pressure pulses that drive the cleaner’s steering. The improved shell and gear materials keep the valve operating under higher water pressure with better resistance to fatigue. You should see steadier directional cycles and fewer stalls when the valve is clean and free of debris.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReinforced polymer housing reduces cracking and extends life.\u003c\/li\u003e\n  \u003cli\u003eG53 POM gear is wear-resistant under continuous operation.\u003c\/li\u003e\n  \u003cli\u003eReplaces original 9-100-1200 valve for Polaris 360 and Vac-Sweep 360.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation or maintenance steps should I know?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone familiar with Polaris in-line valve replacement: remove the old valve from the cleaner’s hose assembly and fit the Amptyhub unit in the same orientation. Periodic inspection and cleaning of the gear and internal passageways prevents sand or grit from jamming the mechanism and prolongs service intervals.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDisconnect cleaner and depressurize hose before removing valve.\u003c\/li\u003e\n  \u003cli\u003eFit valve in the same flow direction as the original part.\u003c\/li\u003e\n  \u003cli\u003eOpen and clean internal gear if sand causes sticking; replace if filter is damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and upgrades set this valve apart?\u003c\/h3\u003e\n\n\u003cp\u003eThe shell uses a crack-resistant polymer blend chosen for impact and fatigue durability, reducing breakage that commonly sidelines older valves. Internally, the G53-grade POM gear resists wear and handles sustained water pressure. Those upgrades together yield roughly double the expected lifespan versus previous versions when used under normal pool conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCrack-resistant polymer shell for improved toughness.\u003c\/li\u003e\n  \u003cli\u003eG53 POM gear mechanism for stable, wear-resistant operation.\u003c\/li\u003e\n  \u003cli\u003eDesigned to tolerate higher pressure cycling typical of automatic cleaners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat troubleshooting should I follow if the valve still misbehaves?\u003c\/h3\u003e\n\n\u003cp\u003eIf the cleaner continues to stall after installing the valve, inspect the pool filter and skimmer for clogs first. If the filter is intact, open the backup valve and clear any sand or grit from the gear; these particles are the most common cause of jamming. Amptyhub also provides responsive support if issues persist.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCheck and, if necessary, replace pool filter before blaming the valve.\u003c\/li\u003e\n  \u003cli\u003eRemove valve housing to turn and clear any trapped debris in the gear.\u003c\/li\u003e\n  \u003cli\u003eContact seller support for assistance; Amptyhub offers lifetime warranty coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool owners or service technicians who run Polaris 360 or Vac-Sweep 360 cleaners and need a more durable, longer-lasting replacement valve will benefit most from this part. It’s ideal if you want an upgrade that reduces breakage and keeps automatic cleaners cycling smoothly, but it is not suited for Polaris 280 or 380 models. If you value a reinforced housing, a wear-resistant gear mechanism, and accessible after-sales support, this Amptyhub backup valve is a practical choice to prolong cleaner life and reduce downtime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this backup valve compatible with Polaris 360?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Amptyhub 9-100-1200 valve fits Polaris 360 and Vac-Sweep 360 cleaners but not Polaris 280 or 380.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What if sand jams the gear?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Open the valve and clean the gear; check the pool filter for damage and clear debris first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Amptyhub","offers":[{"title":"Default Title","offer_id":56799216009556,"sku":"B09VMYSN2C","price":72.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/amptyhub-valve-front-view.jpg?v=1786729571"},{"product_id":"ophjerg-pool-hose-t-joint-connector-kit-for-above-ground-pools-1-5-to-1-25-adapter-uv-resistant-hoses-clamps","title":"Ophjerg Pool Hose \u0026 T-Joint Connector Kit for Above-Ground Pools — 1.5\" to 1.25\" Adapter, UV-Resistant Hoses \u0026 Clamps","description":"\u003cp\u003e\u003cstrong\u003eOphjerg's Pool Hose \u0026amp; T-Joint Connector Kit is a complete replacement and compatibility solution for above-ground pool pumps, supplying durable hoses, a 1.5\" to 1.25\" T-adapter, clamps and spare O-rings to stop leaks and restore flow.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you need to replace brittle tubing or adapt mismatched fittings, this kit bundles the common parts that keep above-ground filtration and vacuum systems working smoothly. It includes two 1.25\" ID x 36\" hoses and two 1.5\" ID x 59\" hoses, a molded T-joint that converts 1.5\" fittings to 1.25\" branches, four stainless clamps and extra rubber O-rings. All components are made from materials chosen to resist sun exposure and everyday handling so you can quickly reconnect pumps, cleaners and return lines.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these hoses solve common pool connection problems?\u003c\/h3\u003e\n\u003cp\u003eThe kit replaces worn or kinked tubing that reduces circulation and causes leaks. The included T-joint fills the gap between popular 1.5\" and 1.25\" port sizes so you don’t need separate adapters or improvised fixes. Installation is straightforward and designed for tool-free clamp tightening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo 1.25\" x 36\" hoses for common pump and vacuum hookups.\u003c\/li\u003e\n  \u003cli\u003eTwo 1.5\" x 59\" hoses for larger return or pump connections.\u003c\/li\u003e\n  \u003cli\u003eOne 1.5\" to 1.25\" T-adapter for mixed-size systems.\u003c\/li\u003e\n  \u003cli\u003eFour stainless clamps and three spare O-rings for secure seals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these parts work with my Intex or Coleman pump?\u003c\/h3\u003e\n\u003cp\u003eThe hoses and adapter are made to match standard above-ground pool ports and many popular pump models. They suit Intex filter pumps and common Coleman setups that use 1.25\" or 1.5\" connections. If your pump has nonstandard fittings, the T-joint often bridges the difference without extra parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many Intex models and common above-ground pumps.\u003c\/li\u003e\n  \u003cli\u003eT-joint bridges 1.5\" to 1.25\" ports for flexible connections.\u003c\/li\u003e\n  \u003cli\u003eClamps provide a leak-resistant join on smooth or ribbed hose ends.\u003c\/li\u003e\n  \u003cli\u003eSpare O-rings ensure a tight seal on threaded or push-fit interfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant are the components?\u003c\/h3\u003e\n\u003cp\u003eHoses are fabricated from UV-stabilized PE to limit brittleness and cracking when exposed to sun and pool chemicals. The T-connector uses impact-resistant PP plastic for a sturdy junction, while stainless clamps resist corrosion. These choices extend service life compared with thin, untreated replacement tubing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV-protected polyethylene hoses reduce sun damage and stiffness.\u003c\/li\u003e\n  \u003cli\u003eImpact-resistant polypropylene T-joint resists cracking under pressure.\u003c\/li\u003e\n  \u003cli\u003eStainless metal clamps minimize rust and hold tight under vibration.\u003c\/li\u003e\n  \u003cli\u003eExtra rubber O-rings for repeated installs and long-term sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly can I replace my hoses and get the pump running?\u003c\/h3\u003e\n\u003cp\u003eSwap-out and reconnection are designed to be fast: slide hoses over fittings, position clamps, then tighten. The kit provides everything you need in a single box so you avoid multiple trips to the store. Typical installation takes 10–20 minutes depending on access and hose routing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free or single-screwdriver clamp tightening recommended.\u003c\/li\u003e\n  \u003cli\u003eClear parts list reduces guesswork and missing-piece delays.\u003c\/li\u003e\n  \u003cli\u003ePre-sized hoses fit common pump and vacuum ports without cutting.\u003c\/li\u003e\n  \u003cli\u003eExtra O-rings allow immediate replacement of worn seals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners and maintenance providers with above-ground Intex, Coleman or similarly configured systems who need a reliable, ready-to-install set of replacement hoses and an adapter to fix leaks, upgrade connections or restore pump performance. It's also useful for seasonal tune-ups or whenever you replace aging flexible tubing to improve circulation and filtration efficiency.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the T-joint convert a 1.5\" pump outlet to two 1.25\" hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The included T-joint allows one 1.5\" port to connect two 1.25\" hoses for mixed-size setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the clamps rust-resistant for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes stainless steel clamps designed to resist corrosion in pool environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Ophjerg","offers":[{"title":"Default Title","offer_id":56799216107860,"sku":"B0GH6NPR3X","price":95.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/ophjerg-front-packaging-kit.jpg?v=1786729576"},{"product_id":"hayward-trimline-2-way-ball-valve-1-1-2-union-pvc-dial-handle-teflon-seats","title":"Hayward Trimline 2-Way Ball Valve 1-1\/2\" Union PVC — Dial Handle, Teflon Seats","description":"\u003cp\u003e\u003cstrong\u003eThe Hayward SP0722S Trimline 2-way 1-1\/2-inch ball valve is a corrosion-resistant PVC union valve that delivers reliable flow control and easy disassembly for pool, spa, and irrigation plumbing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for systems where dependable shutoff and smooth flow are important, the SP0722S combines a dial handle for simple regulation, Teflon seats for consistent sealing, and a union-end design for quick removal or replacement. Rated for service pressures up to 50 psi and manufactured from non-corrosive materials, this valve is intended for above-ground plumbing runs and retrofit jobs where compatibility and long life matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SP0722S manage flow and indicate valve position?\u003c\/h3\u003e\n\u003cp\u003eThe valve uses a dial-style handle that both adjusts flow and provides a clear visual cue of the port orientation. Internally, a precisely aligned ball with Teflon seating creates a smooth flow path and a reliable seal when closed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDial handle gives incremental control and visible position feedback.\u003c\/li\u003e\n  \u003cli\u003e1-1\/2\" port maximizes throughput for typical pool and spa lines.\u003c\/li\u003e\n  \u003cli\u003eTeflon seats resist wear for consistent sealing over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I disassemble plumbing quickly with this Trimline union valve?\u003c\/h3\u003e\n\u003cp\u003eYes — the union-end connector is designed for fast alignment and convenient disassembly without cutting pipe. This makes service, winterization, or equipment swaps faster and reduces the chance of leaks during reassembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUnion connector aligns ball and body for reliable reassembly.\u003c\/li\u003e\n  \u003cli\u003eHand-tightened union nut speeds maintenance and part replacement.\u003c\/li\u003e\n  \u003cli\u003eSuitable for retrofit applications where access may be limited.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat operating limits and environment considerations should I know?\u003c\/h3\u003e\n\u003cp\u003eThe SP0722S is constructed from PVC and corrosion-resistant components and is rated up to 50 psi. PVC valves should not be used in sustained ambient temperatures at or above 104°F (40°C), so place them in shaded or cooled enclosures when high temperatures are expected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum recommended pressure: 50 psi.\u003c\/li\u003e\n  \u003cli\u003eNot recommended for continuous exposure to ambient temperatures ≥104°F (40°C).\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials extend functional life in wet environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this valve fit into new builds and aftermarket upgrades?\u003c\/h3\u003e\n\u003cp\u003eHayward’s SP Series is offered in multiple materials, sizes, and port configurations, making the SP0722S a flexible option for many plumbing layouts. Its union ends and common 1-1\/2\" size help it integrate with standard pool and spa piping or irrigation runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAvailable options in the SP Series simplify matching to existing systems.\u003c\/li\u003e\n  \u003cli\u003e1-1\/2\" FIP thread fits many common fittings and adapters.\u003c\/li\u003e\n  \u003cli\u003eNon-corrosive construction suits wet mechanical rooms and outdoor plumbing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Hayward SP0722S Trimline 2-way ball valve is aimed at pool and spa professionals, contractors, and DIY homeowners who need a robust, easy-to-service shutoff or diverter for 1-1\/2\" lines. It’s well suited for retrofit projects, equipment replacements, and new installations where a union-end PVC valve with clear position indication and reliable Teflon seating is required. If your system operates in high ambient heat or beyond 50 psi, consider selecting a material or model rated for those conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pipe size and connection does the SP0722S use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is a 1-1\/2-inch valve with 1-1\/2\" female iron pipe (FIP) union connections for easy fitting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this PVC valve handle high-temperature environments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—PVC valves like this are not recommended for sustained ambient temperatures at or above 104°F (40°C).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":56799217549652,"sku":"B002EL3YJC","price":69.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hayward-sp0722s-front-packaging.jpg?v=1786729591"},{"product_id":"qiyaz-t-joint-leg-beam-replacement-for-intex-style-round-pools-4-pack-fits-15-26ft-uv-resistant","title":"Qiyaz T-Joint Leg \u0026 Beam Replacement for Intex-Style Round Pools, 4-Pack — Fits 15–26ft, UV-Resistant","description":"\u003cp\u003e\u003cstrong\u003eQiyaz T-joint leg and beam replacement (4-pack) restores the connection points on round Intex-style frame pools, reinforcing stability and letting you reassemble a secure pool frame quickly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf a T-shaped connector on your metal pool frame cracked, corroded or went missing, the Qiyaz replacement kit provides a direct-fit plastic T-joint that snaps into the D‑section rails used on many Intex models. Designed to match the three 3-inch openings of the original part, this set is sized to suit a wide range of round frames from about 15' up to 26' diameters. The parts are molded from pool-grade plastic to resist UV, water and common pool chemicals so repairs last across seasons.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this T-joint bring a broken pool frame back to usable condition?\u003c\/h3\u003e\n\n\u003cp\u003eWhen a T-joint fails the frame can shift and the pool skin loses even tension. Replacing the damaged connector rebuilds the original geometry so rails lock into place and weight loads distribute properly. Installation is tool-free and returns support to the adjacent vertical legs and horizontal beams.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for D-section rails with three 3\" openings\u003c\/li\u003e\n  \u003cli\u003eSnaps into place—no drilling or adhesives required\u003c\/li\u003e\n  \u003cli\u003eRe-establishes correct alignment and load transfer across the frame\u003c\/li\u003e\n  \u003cli\u003eSold as a set of four leg-plus-beam connectors for immediate replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these connectors fit my specific Intex frame model and pool size?\u003c\/h3\u003e\n\n\u003cp\u003eQiyaz crafted these T-joints to match common Intex part dimensions and a long list of model numbers, covering many round pool sizes and rail variants. They are compatible with 15'x48\" through 26'x52\" round frames and a wide set of factory part codes—so you can usually swap them for the original pieces without modification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits many Intex-style rounds: 15', 16', 18', 20', 22', 24', 26' configurations\u003c\/li\u003e\n  \u003cli\u003eWorks with model codes like 28321EH, 26331EH, 26345W and more\u003c\/li\u003e\n  \u003cli\u003eEach connector measures about 5.5 x 2.8 x 4.5 inches (leg+beam set)\u003c\/li\u003e\n  \u003cli\u003eDesigned for 3\" opening diameter on D-section rails\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these replacements in sun, water and chemical exposure?\u003c\/h3\u003e\n\n\u003cp\u003eThe replacements are injection-molded from a durable plastic blend formulated for outdoor and pool use. They resist warping, cracking and brittle failure that can occur from UV exposure or repeated wet\/dry cycles. Regular inspection is advised, but under normal backyard pool use these parts provide season-to-season longevity.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUV-resistant plastic to limit sun-induced degradation\u003c\/li\u003e\n  \u003cli\u003eChemical-tolerant to common chlorine and pool sanitizers\u003c\/li\u003e\n  \u003cli\u003eEngineered to withstand the pressure and stresses of filled frames\u003c\/li\u003e\n  \u003cli\u003eWon't splinter or corrode like metal fasteners might\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation, and what should I check during replacement?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation requires no special tools—simply snap the beam and leg into the T-joint and verify alignment. Work with an empty or partially drained pool according to your pool manual, support rails while swapping connectors, and inspect adjacent pieces for wear. Tight, even seating of rail ends ensures the pool wall remains taut and secure.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTool-free snap-fit install for quick repairs\u003c\/li\u003e\n  \u003cli\u003eReplace one joint at a time to maintain frame stability\u003c\/li\u003e\n  \u003cli\u003eCheck nearby connectors and rail ends for companion wear\u003c\/li\u003e\n  \u003cli\u003eFollow pool manufacturer guidance for drainage and reassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis 4-pack from Qiyaz is intended for pool owners, seasonal repairers and pool-service technicians who need a dependable, direct-fit replacement for damaged T-joints on Intex-style round frames. If you own a 15'–26' round above-ground pool and want a cost-effective way to restore structural integrity without replacing whole rails, this kit gives you compatible parts, straightforward installation and improved season-to-season durability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these T-joints fit my Intex 18' round pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they fit many 18' round Intex-style frames with D-section rails and 3\" openings; check model codes listed for exact matches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the Qiyaz T-joints?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No tools are required; the connectors snap into place, but support the rails while you replace each joint.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Qiyaz","offers":[{"title":"Default Title","offer_id":56799228133716,"sku":"B0FDJWKSWM","price":82.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/qiyaz-front-packaging-t-joint.jpg?v=1786729822"},{"product_id":"ussuray-sp1516-replacement-strainer-housing-for-hayward-power-flo-lx-pumps-1-1-2-inlet-outlet-with-basket-o-ring","title":"Ussuray SP1516 Replacement Strainer Housing for Hayward Power-Flo LX Pumps, 1-1\/2\" Inlet\/Outlet with Basket \u0026 O-Ring","description":"\u003cp\u003e\u003cstrong\u003eUssuray's SP1516 replacement strainer housing, lid, basket and O-ring rebuilds the Hayward Power-Flo LX pump intake to trap debris and protect your pump.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement strainer housing assembly is engineered to match the fit and function of Hayward Power-Flo and Power-Flo II systems, including many SP1500, SP1580 and SP1700 series models. Manufactured from UV-resistant materials and supplied with a basket, lid and O-ring, the unit keeps leaves, hair and coarse debris out of the pump volute so your pool filtration system can run smoothly. The design prioritizes straightforward installation and durable outdoor performance to reduce downtime and limit frequency of replacement.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Hayward models does this Ussuray SP1516 strainer housing work with?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is built to be compatible with a wide range of Power-Flo and Power-Flo II series pumps, plus several older SP1500 family units and common filter lines. Check your pump model number against the compatibility list before ordering to ensure fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Power-Flo LX SP1580 series (SP1575LX, SP1580, SP1580X15, SP1520UN, EP1500LX, SP1680).\u003c\/li\u003e\n  \u003cli\u003eFits Power-Flo II SP1700 series models (SP1705, SP1710, SP1711, SP1720, SP1725, SP1750, SP1775, SP1780, S166T1580S).\u003c\/li\u003e\n  \u003cli\u003eAlso matches Power-Flo SP1500 series (SP1500, SP1510, SP1511, SP1550, SP1575, EP1500, SP1516) and compatible filter series listings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this part protect my pump and improve filtration?\u003c\/h3\u003e\n\u003cp\u003eThe strainer housing and basket trap larger solids before they reach the impeller and volute, preventing clogs and abrasion that reduce pump efficiency. Removing coarse debris at the intake helps maintain suction and reduces strain on motor components, which can extend service life when paired with regular maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCollects leaves, twigs and hair to reduce impeller wear.\u003c\/li\u003e\n  \u003cli\u003eAllows quick basket removal for cleaning and less downtime.\u003c\/li\u003e\n  \u003cli\u003eSeals with included O-ring to prevent leaks at the suction side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what steps are involved?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be user-friendly for a homeowner comfortable with basic pool maintenance: power down, depressurize, swap the housing and reseal. The replacement comes with the basket, lid and O-ring so you won’t need extra parts for a direct changeout in compatible pumps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off pump power and relieve system pressure before starting.\u003c\/li\u003e\n  \u003cli\u003eDrain the strainer pot, remove old housing, clean flange surfaces.\u003c\/li\u003e\n  \u003cli\u003eFit the new O-ring, install housing and lid, then tighten and test for leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and warranty support come with this Ussuray assembly?\u003c\/h3\u003e\n\u003cp\u003eThe housing is molded from UV-stabilized plastic formulated for outdoor pool use, designed to resist sun damage and typical pool chemicals. Ussuray backs the part with a 30-day satisfaction window and a 12-month warranty for quality-related issues, plus customer support for fitment or installation questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable UV-resistant construction for outdoor longevity.\u003c\/li\u003e\n  \u003cli\u003eIncludes basket, threaded lid and rubber O-ring for a complete replacement.\u003c\/li\u003e\n  \u003cli\u003e30-Day Satisfaction Guarantee and 12-Month Warranty with support team access.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners and service technicians who operate Hayward Power-Flo LX, Power-Flo II or compatible SP1500-series pumps and need a reliable replacement strainer housing. It’s best for users seeking an OEM-fit solution that simplifies maintenance, protects pump internals from debris, and minimizes future repairs. Confirm your pump model before purchase to ensure compatibility and a straightforward swap.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this replace my Hayward SP1516 strainer housing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this Ussuray assembly is a direct-fit replacement for the Hayward SP1516 and many Power-Flo models; confirm your model number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include the O-ring and lid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the product includes the housing, basket, threaded lid and O-ring for a complete swap.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Ussuray","offers":[{"title":"Default Title","offer_id":56799231181140,"sku":"B0FLQ3N31V","price":84.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/ussuray-front-view-strainer-housing.jpg?v=1786729899"},{"product_id":"shishishun-pcb-display-board-replacement-for-hayward-aquarite-glx-pcb-dsp-glx-pcb-rite-compatible-with-t-cell-models-restores-d","title":"SHISHISHUN PCB Display Board replacement for Hayward AquaRite GLX-PCB-DSP\/GLX-PCB-RITE — compatible with T-CELL models, restores d","description":"\u003cp\u003e\u003cstrong\u003eSHISHISHUN PCB Display Board is a direct-fit replacement display PCB compatible with Hayward Goldline AquaRite systems, restoring visual controls and status reporting for GLX-PCB-DSP and GLX-PCB-RITE setups.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement display PCB is designed to bring a non-functioning or damaged AquaRite display back to life without replacing the entire control system. It fits the Hayward Goldline AquaRite family of chlorination controls and works with several T-CELL models, providing the visible interface and status indicators the system needs to communicate settings and performance. The module is sold as a compatible aftermarket part by SHISHISHUN and is not an original Hayward-manufactured board.\u003c\/p\u003e\n\n\u003ch3\u003eWill this display board work with my Hayward AquaRite control?\u003c\/h3\u003e\n\n\u003cp\u003eYes, the SHISHISHUN board is made to be compatible with Hayward part numbers GLX-PCB-RITE and GLX-PCB-DSP. It restores the display and button interactions on Goldline AquaRite control panels so you can read settings and diagnostic codes again.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with Hayward GLX-PCB-RITE and GLX-PCB-DSP part numbers.\u003c\/li\u003e\n  \u003cli\u003eSupports visual interface for Goldline AquaRite chlorinator controls.\u003c\/li\u003e\n  \u003cli\u003eReplaces a failed or damaged display without swapping the entire control unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Chlorinator T-CELL models does it support?\u003c\/h3\u003e\n\n\u003cp\u003eThis board works with a range of Goldline T-CELL electrolytic cells commonly used with AquaRite systems. It communicates with the control electronics that regulate salt chlorine generation for the listed cells.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with T-CELL-15, T-CELL-9, T-CELL-5 and T-CELL-3 models.\u003c\/li\u003e\n  \u003cli\u003eEnables normal display of chlorine output and service messages for those cells.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain system usability without replacing the T-CELL hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any Hayward systems this board won’t work with?\u003c\/h3\u003e\n\n\u003cp\u003eYes. This replacement is intended for standalone Goldline AquaRite displays and is not compatible with Hayward automated control systems that integrate display and broader automation functions. It’s an aftermarket part and Blue Works PCB Display Board is not a Hayward product.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNot compatible with Hayward full-home or automated pool control systems.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement, not an OEM Hayward-manufactured board.\u003c\/li\u003e\n  \u003cli\u003eDo not use if your system requires proprietary Hayward automation integrations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInstallation tips: power down the control panel before replacing the PCB, document connector positions, and handle the new board by its edges to avoid static damage. If you’re unsure about wiring or mounting, consult a qualified pool technician to ensure safe and correct installation.\u003c\/p\u003e\n\n\u003cp\u003eWho is this for? Pool owners and service technicians who need a cost-effective way to restore display functionality on Hayward Goldline AquaRite chlorination systems. It’s ideal for those replacing a cracked, non-responsive, or water-damaged display PCB on compatible GLX or RITE display assemblies without swapping the entire control box. This SHISHISHUN replacement gives you a visible, responsive control interface again while keeping your existing T-CELL and control electronics in place.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this an original Hayward PCB?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This SHISHISHUN board is an aftermarket compatible replacement, not produced by Hayward.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install it myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic DIY-savvy owners can, but power down first and document connectors; hire a technician if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SHISHISHUN","offers":[{"title":"Default Title","offer_id":56799249989972,"sku":"B0BS8W96V7","price":72.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/shishishun-front-view-display-pcb.jpg?v=1786729980"},{"product_id":"hayward-ecx1040-replacement-bump-handle-for-ec40-perflex-d-e-filter-xyron-durable-oem-fit","title":"Hayward ECX1040 Replacement Bump Handle for EC40 Perflex D.E. Filter — Xyron Durable OEM-Fit","description":"\u003cp\u003e\u003cstrong\u003eHayward ECX1040 is the direct-fit replacement bump handle assembly for the EC40 \/ EC40AC Perflex D.E. filter, restoring the manual bumping action that loosens trapped debris for efficient cleaning.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned specifically for Hayward Perflex Extended-Cycle D.E. filters, this ECX1040 bump handle replaces worn or broken assemblies so your EC40 filter can perform maintenance bumps reliably. It’s made from durable Xyron material and manufactured in the United States to the same size and mounting standards as the original part, making installation straightforward for pool owners and service technicians. Keeping the bump mechanism in good working order helps preserve filter efficiency and extend the time between full cleanings.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this bump handle assembly restore filter performance?\u003c\/h3\u003e\n\u003cp\u003eThe bump handle reconnects the manual bumping function to the Perflex Flex-Tube system, allowing you to jolt the filter internals and dislodge collected D.E. and debris. That brief bump action helps shed trapped particles so the filter resumes higher flow and trapping efficiency without a full teardown.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces damaged or missing bump hardware on EC40 models\u003c\/li\u003e\n  \u003cli\u003eRe-enables manual bump cycles that free retained D.E. powder and particles\u003c\/li\u003e\n  \u003cli\u003eHelps maintain consistent flow and filtration between cleanings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and fit should I expect from the ECX1040 part?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is molded from Xyron-grade material selected for impact and weather resistance, matching the original component’s form and function. It’s supplied as the OEM-compatible bump handle for EC40 and EC40AC Perflex filters, so the bolt holes, shaft shape, and connection points align with factory tolerances.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable Xyron construction resists UV and pool chemicals\u003c\/li\u003e\n  \u003cli\u003eMade to OEM dimensions for straightforward fitment\u003c\/li\u003e\n  \u003cli\u003ePackaged to protect the part during shipping and storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the replacement bump handle on my EC40 filter?\u003c\/h3\u003e\n\u003cp\u003eInstallation is direct and usually requires only basic hand tools: remove the old assembly, align the new handle with the bump shaft and secure the retaining fasteners. No filter disassembly or special adhesives are typically necessary, but follow your owner’s manual for safety steps like turning off pump power and relieving system pressure first.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off pump and relieve system pressure before starting\u003c\/li\u003e\n  \u003cli\u003eRemove the old handle and attach ECX1040 using original fasteners\u003c\/li\u003e\n  \u003cli\u003eTest the bump action gently to confirm secure engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I replace the bump handle rather than other parts?\u003c\/h3\u003e\n\u003cp\u003eSwap the bump handle when you notice cracks, excessive looseness, or a loss of positive bump action; those symptoms indicate the assembly can no longer transfer the shock needed to shed debris. If the bump handle is intact but the filter still underperforms, inspect Flex-Tubes and D.E. powder condition before replacing additional components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace on visible wear, cracking, or broken mounting points\u003c\/li\u003e\n  \u003cli\u003eChoose replacement over repair for reliable, long-term function\u003c\/li\u003e\n  \u003cli\u003ePair with routine inspection of Flex-Tube elements and D.E. media\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners or service professionals who operate Hayward EC40 or EC40AC Perflex D.E. filters and need a direct replacement for a worn or broken bump handle. This OEM-compatible assembly is ideal if you want a simple, durable repair to restore manual bumping action without replacing the entire filter, helping maintain filtration efficiency and extend cleaning intervals.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this bump handle fit my EC40AC model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ECX1040 is compatible with both EC40 and EC40AC Perflex D.E. filters and matches OEM mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required; basic hand tools suffice. Always cut power and relieve system pressure first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":56799256805716,"sku":"B0030BEFHK","price":66.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hayward-ecx1040-front-assembly.jpg?v=1786730102"},{"product_id":"jett-flo-pool-fountain-cleaner-for-inground-and-above-ground-pools-1-5-return-up-to-10x-circulation-shut-off-valve","title":"jett flo Pool Fountain \u0026 Cleaner for Inground and Above-Ground Pools — 1.5\" Return, Up to 10x Circulation, Shut-Off Valve","description":"\u003cp\u003e\u003cstrong\u003eJett Flo Pool Fountain \u0026amp; Cleaner is a patented fountain attachment for 1.5\" threaded pool returns that creates a decorative water feature while increasing circulation up to ten times and simplifying pool maintenance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for both inground and above-ground pools, this 2025 Jett Flo system combines a user-adjustable fountain with a built-in cleaner function and a shut-off ball valve. The kit installs without tools in minutes, fits standard 1.5\" return fittings, and comes with an adjustable extension and a mesh storage bag to keep parts together season to season. Its unique flow-shaping design improves aeration and overall water movement so pumps and chemicals work more efficiently.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Jett Flo attachment improve daily pool circulation?\u003c\/h3\u003e\n\n\u003cp\u003eThe fountain reshapes return flow into a high-velocity jet and broader surface return, increasing turnover and moving stagnant water from corners and steps. Better circulation helps distribute sanitizer and reduces dead zones where debris and algae form.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePatent-designed nozzle multiplies return flow for up to 10x increased circulation.\u003c\/li\u003e\n  \u003cli\u003eRecommended for pools with at least a 1 HP pump to achieve the highest fountain heights and circulation gains.\u003c\/li\u003e\n  \u003cli\u003eAdjustable velocity sleeve controls flow so you can prioritize circulation or a softer fountain.\u003c\/li\u003e\n  \u003cli\u003eImproved aeration can raise pH slightly while leaving alkalinity stable, helping chemical distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I control fountain height and shut it off when needed?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the included ball valve lets you stop the fountain or throttle flow easily, and the adjustable sleeve plus extension offer broad height control. Fountain performance depends on pump pressure, so actual height ranges vary by equipment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBall valve included for instant on\/off and fine flow control.\u003c\/li\u003e\n  \u003cli\u003eAdjustable velocity sleeve provides fountain height settings from smaller sprays up to dramatic jets.\u003c\/li\u003e\n  \u003cli\u003eExtension piece offers roughly 12 inches of vertical adjustment from the return center to the waterline.\u003c\/li\u003e\n  \u003cli\u003eManufacturer states fountain height ranges from about 6 inches up to 10 feet, depending on pump output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and materials should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is tool-free and takes under five minutes when you have a compatible 1.5\" threaded return. Components are injection-molded ABS for durability and non-toxicity, and the kit is supplied as a six-piece assembly ready for seasonal use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits standard 1.5\" threaded pool returns only — not compatible with Intex, Coleman, Bestway, or nonstandard fittings.\u003c\/li\u003e\n  \u003cli\u003eSix-piece set snaps together; no special tools or adhesives required.\u003c\/li\u003e\n  \u003cli\u003eMade from robust, UV-tolerant ABS plastic designed for long-term pool exposure.\u003c\/li\u003e\n  \u003cli\u003eIncludes a strong mesh storage bag with locking drawstring to keep parts together during winterizing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this help reduce chemical usage and affect water temperature?\u003c\/h3\u003e\n\n\u003cp\u003eThe unit’s increased circulation and aeration can improve sanitizer distribution, which may lower the amount of chemicals needed in many pools. Using the fountain strategically — during daytime or nighttime — can also enhance evaporative cooling or promote mild warming through enhanced mixing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eImproved mixing often reduces chemical stratification and can decrease routine chemical usage.\u003c\/li\u003e\n  \u003cli\u003eManufacturer cites potential chemical savings of nearly 50% in optimized conditions.\u003c\/li\u003e\n  \u003cli\u003eFountain operation can aid slight cooling or heating effects by promoting surface exchange and pump circulation.\u003c\/li\u003e\n  \u003cli\u003eResults depend on pool size, pump power, and local climate; individual outcomes will vary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Jett Flo Pool Fountain \u0026amp; Cleaner is aimed at pool owners with 1.5\" threaded returns who want an easy, tool-free upgrade that combines a decorative fountain with a performance-focused circulation boost. It suits inground and above-ground pools using at least a 1 HP pump, seasonal users who need tidy storage, and anyone seeking better water movement to simplify cleaning and chemical dosing. Do not purchase if your pool uses nonstandard return fittings or brands listed as incompatible.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the Jett Flo fit my pool return?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits only standard 1.5\" threaded return fittings. It does not fit Intex, Coleman, Bestway, or nonstandard sizes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a special pump for the fountain to work?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special pump is required, but a pump of at least 1 HP is recommended to achieve maximum fountain height and circulation gains.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"jett flo","offers":[{"title":"Default Title","offer_id":56799269060948,"sku":"B07N56RGGD","price":70.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/jett-flo-front-assembly.jpg?v=1786730374"},{"product_id":"pentair-triton-ii-sand-filter-air-relief-fitting-154687-oem-replacement-chemical-resistant-vent","title":"Pentair Triton II Sand Filter Air Relief Fitting 154687 - OEM Replacement, Chemical-Resistant Vent","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair PacFab Triton II Sand Filter Air Bleed Fitting 154687 is the factory air relief assembly designed to safely purge trapped air from the Triton II sand filter body.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis OEM air relief assembly fits Pentair PacFab Triton II sand filters and restores reliable venting where trapped air can reduce circulation or cause pump strain. Designed as a direct replacement part, the 154687 Air Relief Assembly helps maintain steady water flow and makes routine servicing quicker by providing a controlled way to release air without disassembling the tank.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this air relief fitting improve pool circulation?\u003c\/h3\u003e\n\u003cp\u003eAir inside a sand filter creates air pockets that interrupt water flow and lower filtration efficiency. Installing the Pentair 154687 allows air to escape from the filter’s head, restoring proper flow and reducing the risk of pump cavitation. It operates simply—air is bled from the high point so water can resume its designed path through the media.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces worn or missing factory vent for Triton II sand filters\u003c\/li\u003e\n  \u003cli\u003eRestores steady water flow and consistent filter performance\u003c\/li\u003e\n  \u003cli\u003eReduces pump noise from air cavitation and extends equipment life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the main features and compatibility details?\u003c\/h3\u003e\n\u003cp\u003eThe 154687 is built to Pentair’s original equipment specifications for PacFab Triton II sand filters. Its materials resist pool chemicals and UV exposure typical around filter lids and multiport valves. Because it’s an OEM part, fitment and thread sizes match the original port, so no adapters are usually needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM Pentair PacFab part number 154687 for Triton II models\u003c\/li\u003e\n  \u003cli\u003eChemically resistant construction suitable for residential pools\u003c\/li\u003e\n  \u003cli\u003eDesigned to thread into the filter head for a secure seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you install and maintain the air relief assembly?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic tools and moderate DIY skill: depressurize the filter, remove the old fitting, and screw in the new assembly with proper sealing compound or Teflon tape. Regularly check for leaks and operate the vent after service or when new air enters the system. Replace the fitting if it shows cracks, excessive wear, or fails to hold pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways release system pressure before servicing the filter\u003c\/li\u003e\n  \u003cli\u003eHand-tighten then snug with a small wrench—avoid over-torquing\u003c\/li\u003e\n  \u003cli\u003eInspect periodically for cracking from UV or chemical exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part save me time or money compared with full replacement?\u003c\/h3\u003e\n\u003cp\u003eReplacing only the air relief fitting is far less expensive and faster than replacing the entire filter or head assembly when the problem is limited to venting. The OEM 154687 ensures correct function without compromising filter integrity, making it a cost-effective maintenance part for durable operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLower cost than replacing multiport valve or filter head\u003c\/li\u003e\n  \u003cli\u003eQuick swap reduces downtime for the pool system\u003c\/li\u003e\n  \u003cli\u003eMaintains original Pentair fit and performance standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool owners, service technicians, and pool supply shops that maintain Pentair PacFab Triton II sand filters will find the 154687 air relief assembly essential for routine repairs. If you notice air buildup, irregular flow, or vent failure on a Triton II, this direct-fit replacement restores proper venting without costly system upgrades.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this air relief assembly compatible with all Triton II models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the 154687 is the OEM Pentair PacFab air relief part specified for Triton II sand filters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the fitting myself without a technician?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Turn off and depressurize the system, remove the old fitting, and thread in the new one with sealant; no advanced tools required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":56799292096852,"sku":"B0034EJNJ8","price":69.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/pentair-pacfab-triton-ii-front-view.jpg?v=1786730719"},{"product_id":"zodiac-jandy-backwash-valve-shaft-kit-r0442200-replacement-roll-pins-o-rings-index-plate-fits-jandy-style-valves","title":"Zodiac Jandy backwash valve shaft kit R0442200 — replacement roll pins, O‑rings \u0026 index plate (fits Jandy-style valves)","description":"\u003cp\u003e\u003cstrong\u003eZodiac R0442200 shaft kit is a complete replacement pack of shaft, pins, O-rings and lid parts designed to restore proper function to a Zodiac Jandy backwash valve.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis shaft kit supplies the small mechanical components that often wear on pool backwash valves. Rather than replacing the entire valve, the R0442200 bundle gives you the exact roll pins, index plate, union nut and O-rings needed to repair leaks, binding or imprecise indexing. All parts are sized for compatibility with the Zodiac Jandy backwash valve and are sourced from the United States.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts come in the R0442200 kit and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains one 1-inch roll pin handle, one 13\/16-inch roll pin shaft, an index plate (lid), a lid union nut, one lid O-ring and two shaft O-rings (top black and bottom purple). Each component contributes to sealing, alignment and rotational control of the backwash valve so the valve indexes cleanly between positions without leaking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 roll pin handle (1\") for secure lever attachment\u003c\/li\u003e\n  \u003cli\u003e1 roll pin shaft (13\/16\") to replace worn shafts\u003c\/li\u003e\n  \u003cli\u003eIndex plate\/lid and lid union nut for correct valve alignment\u003c\/li\u003e\n  \u003cli\u003eLid O-ring plus shaft O-rings (black top, purple bottom) for reliable sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know this kit fits my Jandy backwash valve?\u003c\/h3\u003e\n\u003cp\u003eThe R0442200 kit is manufactured to match Zodiac Jandy valve dimensions and replacement specifications. If your valve uses the Jandy-style backwash assembly found on many Zodiac systems, these parts are the intended fit; confirm by comparing the shaft and O-ring sizes to the worn components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare roll pin and shaft measurements to existing parts\u003c\/li\u003e\n  \u003cli\u003eVerify your valve is a Zodiac Jandy backwash model\u003c\/li\u003e\n  \u003cli\u003eCheck the index plate shape and union nut thread match your valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat improvements should I expect after installing the shaft kit?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn pins, O-rings and the index plate typically restores smooth rotation, reduces leaks around the lid and improves valve indexing accuracy. You should notice less play in the handle and a tighter seal that reduces water weeping during standby positions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother handle rotation and precise position stops\u003c\/li\u003e\n  \u003cli\u003eReduced leaking at the lid and shaft interfaces\u003c\/li\u003e\n  \u003cli\u003eExtended service life for the existing valve body\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic pool equipment repairs. Typical tools include a flat screwdriver, pliers and possibly a small punch for roll pin removal; the procedure involves removing the lid, replacing the worn components and reassembling with the union nut.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlat screwdriver and pliers for lid and nut removal\u003c\/li\u003e\n  \u003cli\u003eSmall punch or drift to remove and install roll pins\u003c\/li\u003e\n  \u003cli\u003eClean, lubricate new O-rings with silicone-based lubricant before seating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool technicians, DIY pool owners and maintenance pros who want an exact, factory-style replacement for the wearable parts of a Zodiac Jandy backwash valve. If you have a functional valve body but suffer from leaks, loose handles or indexing problems, the R0442200 shaft kit gives the specific hardware to restore reliable operation without the expense of a full valve replacement.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace these parts myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. With basic tools and care—screwdriver, pliers, small punch—you can swap the roll pins, O-rings and lid components following manufacturer guidance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the O-rings included the correct colors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes the specified black top O-ring and purple bottom shaft O-ring for proper sealing and fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":56799315165524,"sku":"B008E6IYF0","price":65.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/zodiac-shaft-kit-front-packaging.jpg?v=1786731058"},{"product_id":"smart-spa-supply-5-5-kw-240v-titanium-flo-thru-heater-element-universal-hot-tub-replacement-corrosion-resistant","title":"Smart Spa Supply 5.5 kW 240V Titanium Flo-Thru Heater Element — Universal Hot Tub Replacement, Corrosion-Resistant","description":"\u003cstrong\u003eA 5.5 kW, 240V titanium flo‑thru heater element from Smart Spa Supply designed as a universal replacement for many hot tub heater assemblies.\u003c\/strong\u003e\n\n\u003cp\u003eThis durable titanium flo‑thru heater element replaces worn or corroded heating components in compatible 240V hot tub systems. Built for longevity and reliable thermal transfer, the element minimizes downtime and restores the spa's ability to reach and maintain set temperatures. It fits a broad range of hot tubs when paired with the correct mounting and wiring, offering a cost‑effective alternative to full heater assembly replacement.\u003c\/p\u003e\n\n\u003ch3\u003eWill this element fit my hot tub model?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on the heater housing, mounting type, element length, and electrical specifications. This Smart Spa Supply unit is engineered as a universal flo‑thru element for many 240V systems, but you should confirm dimensions and connector style before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: 240V, Power: 5.5 kW — match to your control pack rating.\u003c\/li\u003e\n  \u003cli\u003eCheck physical length and flange\/mounting style against your old element.\u003c\/li\u003e\n  \u003cli\u003eConfirm terminal type and wiring layout with your spa schematic.\u003c\/li\u003e\n  \u003cli\u003eWhen in doubt, compare part numbers or consult a technician.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the titanium flo‑thru heater element?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically involves draining the hot tub, disconnecting power, removing the heater housing cover, and swapping the old element for the new one. Basic plumbing and electrical skills are helpful; follow manufacturer safety guidelines and local codes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off all power to the spa at the breaker before starting.\u003c\/li\u003e\n  \u003cli\u003eDrain water to below the heater housing level for safe removal.\u003c\/li\u003e\n  \u003cli\u003eDisconnect wiring and carefully remove the old element from its flange or insulation block.\u003c\/li\u003e\n  \u003cli\u003eInstall new element, reattach wiring, leak‑test, refill, and power up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat advantages does a titanium element offer over other materials?\u003c\/h3\u003e\n\u003cp\u003eTitanium resists corrosion and scale buildup better than standard stainless steel, making it well suited for harsher water conditions and chemical treatments. That durability can extend service life and reduce the frequency of replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh corrosion resistance in chlorinated and brominated water.\u003c\/li\u003e\n  \u003cli\u003eLower risk of pitting and failure from electrochemical corrosion.\u003c\/li\u003e\n  \u003cli\u003eEfficient heat transfer maintains heater performance.\u003c\/li\u003e\n  \u003cli\u003eFewer service interruptions and longer lifecycle in many setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Spa owners and service technicians seeking a robust, ready‑to‑install 5.5 kW, 240V flo‑thru heater element to replace a failing or corroded component. Ideal for users who need a universal titanium option compatible with a variety of hot tub control systems and who want improved corrosion resistance without replacing the entire heater assembly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this heater element compatible with 120V systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Smart Spa Supply element is rated for 240V systems only and should not be used on 120V circuits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace the element myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if you have basic electrical and plumbing skills, but always disconnect power, follow safety steps, and consult a technician if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Smart Spa Supply","offers":[{"title":"Default Title","offer_id":56799317754196,"sku":"B091D657KK","price":65.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/smart-spa-supply-heater-front-view.jpg?v=1786731123"},{"product_id":"cryspool-spa-filter-75-sq-ft-replacement-cartridge-20-1-8-x-4-15-16-fits-c-4975-prb75-washable-trilobal-media","title":"Cryspool Spa Filter 75 sq ft Replacement Cartridge 20-1\/8\" x 4-15\/16\" – Fits C-4975\/PRB75, Washable Trilobal Media","description":"\u003cp\u003e\u003cstrong\u003eCryspool 04086 is a 75 sq. ft. replacement spa filter built to match C-4975 and PRB75 specifications for reliable debris capture and easy cleaning.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis cartridge is engineered to fit a wide range of hot tubs and spas that require a 20-1\/8\" length and a 4-15\/16\" outer diameter, providing a cost-effective alternative to several OEM part numbers. Constructed from a multilayer trilobal fiber fabric, the 04086 focuses on increased dirt-holding capacity and repeated washability so the filter maintains flow and extends service life when cared for regularly.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and fit details?\u003c\/h3\u003e\n\u003cp\u003eThe Cryspool 04086 measures 20-1\/8\" long with a 4-15\/16\" outer diameter and 2-1\/8\" openings on both ends, offering 75 square feet of filtration surface. These dimensions make it compatible with many top-load pressure and twist-top mount applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 20-1\/8\" (overall)\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: 4-15\/16\"\u003c\/li\u003e\n  \u003cli\u003eTop\/Bottom openings: 2-1\/8\"\u003c\/li\u003e\n  \u003cli\u003eFiltration area: 75 sq. ft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich spa and filter models does it replace?\u003c\/h3\u003e\n\u003cp\u003eThe 04086 is made to be a drop-in replacement for several part numbers used across spa brands. It matches the sizing and sealing geometry of common OEM cartridges so you can swap it into systems that list C-4975, PRB75 and similar numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible references: C-4975, PRB75, FC-2395, R173435, 17-2632\u003c\/li\u003e\n  \u003cli\u003eWorks with Rainbow RTL-75 and Rainbow Dynamic 75 systems\u003c\/li\u003e\n  \u003cli\u003eFits various models from Nahani\/MAAX, Hydro Pool, Emerald, Dakota and other spas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the material and construction affect performance?\u003c\/h3\u003e\n\u003cp\u003eCryspool uses a trilobal fiber fabric that creates more surface area and deeper pleat capacity than standard point-bond media. This structure captures finer particles and resists compaction, allowing water to pass freely while trapping debris for longer between cleanings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrilobal fibers increase dirt-holding ability\u003c\/li\u003e\n  \u003cli\u003ePleated construction expands filtration area to 75 sq. ft.\u003c\/li\u003e\n  \u003cli\u003eDurable end caps and pleat support reduce deformation under pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance steps keep the filter working longer?\u003c\/h3\u003e\n\u003cp\u003eThe filter is designed for repeated rinsing and can be restored close to new performance when cleaned properly. Rinse with a high-pressure hose and use a cleaning soak when needed; replace only when physical damage or irreversible clogging appears.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRinse pleats with a strong spray; clean when gauge indicates higher pressure\u003c\/li\u003e\n  \u003cli\u003eSoak periodically with a cartridge cleaner for oils and mineral buildup\u003c\/li\u003e\n  \u003cli\u003eInspect end caps and pleat integrity during each cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Cryspool 04086 is aimed at spa owners and maintenance technicians who need a durable, washable 75 sq. ft. cartridge compatible with many C-4975\/PRB75 applications. It suits anyone looking to maintain optimal flow and filtration without relying on OEM-only parts, provided they follow routine cleaning and inspection to maximize service life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does Cryspool 04086 fit my PRB75 spa?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your spa uses cartridges with 20-1\/8\" length, 4-15\/16\" outer diameter and 2-1\/8\" end openings, the 04086 is compatible with PRB75-style housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I clean this filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Rinse when the pressure gauge rises, and deep-clean with a soak every few months depending on use and water conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Cryspool","offers":[{"title":"Default Title","offer_id":56799327355220,"sku":"B0BHHV5J2K","price":99.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/cryspool-04086-front-view.jpg?v=1786731283"},{"product_id":"hayward-1-1-2-abs-full-flo-90-sweep-elbow-white-self-aligning-double-male-union","title":"Hayward 1-1\/2\" ABS Full-Flo 90° Sweep Elbow — White, Self-Aligning Double Male Union","description":"\u003cstrong\u003eHayward SP1485 is a 1-1\/2-inch MIP white ABS full-flow 90° sweep elbow with self-aligning double male end union for reliable pool pump-to-filter connections.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact Hayward elbow is built for in-ground pool plumbing where a smooth, unrestricted 90-degree turn and a tool-free union connection improve flow and maintenance. Molded from durable ABS in a clean white finish, the SP1485 fits standard 1-1\/2-inch male iron pipe (MIP) threads on both ends and is engineered to align itself during assembly, minimizing stress on fittings and simplifying installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this elbow keep water moving efficiently?\u003c\/h3\u003e\n\u003cp\u003eThe Full-Flo 90-degree sweep profile reduces turbulence compared with sharp 90° fittings, helping maintain pump performance and reducing pressure loss. Its straight internal passage avoids sudden restrictions, which benefits circulation and filtration systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwept 90° bend for smoother flow\u003c\/li\u003e\n  \u003cli\u003eFull-Flo internal diameter matches 1-1\/2-inch plumbing\u003c\/li\u003e\n  \u003cli\u003eABS construction resists common pool chemicals\u003c\/li\u003e\n  \u003cli\u003eHelps preserve pump head and filter efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install the SP1485 myself, and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eYes — the self-aligning double male end union speeds up installation and reduces the need for precise thread-to-thread alignment. In many cases you can assemble it by hand and finish with basic plumbing tools to ensure a snug, leak-free seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-tighten union then finish with strap wrench or pliers if needed\u003c\/li\u003e\n  \u003cli\u003eNo special adhesives required for the union side\u003c\/li\u003e\n  \u003cli\u003eThread sealant or tape recommended on MIP threads for leak prevention\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard 1-1\/2-inch MIP pool pump and filter ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does this fitting offer?\u003c\/h3\u003e\n\u003cp\u003eManufactured from ABS plastic, the Hayward SP1485 balances lightweight handling with resistance to impact and many pool chemicals. The white finish resists UV degradation better than some unstabilized plastics, making it suitable for outdoor equipment pads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS construction for chemical and impact resistance\u003c\/li\u003e\n  \u003cli\u003eWhite finish for UV stability and neat appearance\u003c\/li\u003e\n  \u003cli\u003ePrecision-molded threads for consistent sealing performance\u003c\/li\u003e\n  \u003cli\u003eDesigned for plumbing stress reduction via self-alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this elbow fit into my existing pool plumbing layout?\u003c\/h3\u003e\n\u003cp\u003eThe SP1485 is ideal where a 90-degree change of direction is needed between pump and filter or other equipment in a 1-1\/2-inch system. Because it uses male MIP threads on both ends, it pairs directly with female-threaded pump or filter ports and standard unions or couplings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits standard 1-1\/2-inch MIP ports and accessories\u003c\/li\u003e\n  \u003cli\u003eUseful for tight equipment pad layouts requiring a sweep elbow\u003c\/li\u003e\n  \u003cli\u003eSelf-aligning union reduces torque on adjacent fittings and hoses\u003c\/li\u003e\n  \u003cli\u003eWhite color coordinates with common pool equipment aesthetics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool service professionals, DIY enthusiasts, and homeowners replacing or upgrading in-ground pool plumbing will find the Hayward SP1485 useful when they need a reliable, low-loss 90-degree connection in 1-1\/2-inch MIP systems. It’s particularly suited to installations where easy alignment, reduced plumbing stress, and consistent flow characteristics matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the SP1485 compatible with my 1-1\/2-inch pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The SP1485 has 1-1\/2-inch MIP on both ends and mates with standard female-threaded pump and filter ports.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need glue to install the Hayward union elbow?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No glue is required for the union; use thread sealant or tape on the MIP threads for a secure, leak-free connection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":56799331844436,"sku":"B004VTGHVW","price":87.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hayward-sp1485-front-packaging.jpg?v=1786731351"},{"product_id":"cryspool-replacement-spa-filter-cartridge-23-5-8-c-4995-fc-2940-trilobal-fiber-95-sq-ft","title":"Cryspool replacement spa filter cartridge 23-5\/8\" (C-4995\/FC-2940) trilobal fiber, 95 sq ft","description":"\u003cstrong\u003eThe Cryspool 04087 is a 23-5\/8\" replacement spa cartridge filter with trilobal fiber media that restores filtration for models listed as C-4995 and FC-2940.\u003c\/strong\u003e\n\n\u003cp\u003eIf your spa or hot tub is running cloudy or the original cartridge has reached its service limit, the Cryspool 04087 provides a direct-fit replacement sized and shaped to match common OEM C-4995\/FC-2940 cartridges. Built with trilobal fiber pleats and reinforced end caps, this cartridge is engineered to increase dirt-holding capacity and simplify routine cleaning so your water stays clearer between maintenance cycles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Cryspool 04087 improve spa water clarity?\u003c\/h3\u003e\n\u003cp\u003eThe cartridge uses advanced trilobal fiber material that creates more surface area per pleat than standard point-bond media. That means the filter traps finer particles deeper in the pleat structure without restricting flow, helping pumps run efficiently while removing more contaminants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e95 square feet of filtration area for increased dirt-holding capacity\u003c\/li\u003e\n  \u003cli\u003eTrilobal fiber media captures smaller particles and distributes debris throughout pleats\u003c\/li\u003e\n  \u003cli\u003eImproved flow performance keeps circulation steady and reduces strain on the pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter fit my spa model that lists C-4995 or FC-2940?\u003c\/h3\u003e\n\u003cp\u003eThe Cryspool 04087 is manufactured to match the critical dimensions of common C-4995\/FC-2940 style cartridges, including overall length and top and bottom openings. Always compare measurements to your existing cartridge to confirm fit before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 23-5\/8\" to match OEM cartridges\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: 4-15\/16\" with 2-1\/8\" top and bottom openings\u003c\/li\u003e\n  \u003cli\u003eCompatible alternatives: PCAL100 and 817-1000 references for cross-checking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I clean and maintain this replacement cartridge?\u003c\/h3\u003e\n\u003cp\u003eThe Cryspool 04087 is designed for repeated cleaning thanks to its durable trilobal fabric and sturdy end caps. Rinse the pleats with a high-pressure hose and use a filter cleaning solution periodically; cleaning restores filtration depth and can extend the cartridge’s usable life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRinse when pressure gauge indicates cleaning is needed\u003c\/li\u003e\n  \u003cli\u003eUse a filter cleaner soak periodically for oil and scale removal\u003c\/li\u003e\n  \u003cli\u003eInspect end caps and pleats for damage; replace if torn or deformed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the core construction features and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe cartridge combines trilobal fiber media, reinforced pleats, and robust end caps to balance filtration efficiency with mechanical durability. These design choices reduce the frequency of replacements and help the filter maintain consistent performance through multiple cleanings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrilobal fibers increase effective filtration area and longevity\u003c\/li\u003e\n  \u003cli\u003eReinforced pleat structure prevents collapse under flow pressure\u003c\/li\u003e\n  \u003cli\u003eDurable end caps ensure a secure seal in the filter housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho is this for?\u003c\/strong\u003e The Cryspool 04087 is intended for spa and hot tub owners, service technicians, and pool retailers seeking an affordable, reliable replacement for cartridges labeled C-4995, FC-2940, PCAL100 or 817-1000. Choose this filter if you want a direct-fit cartridge with high surface area, easy cleaning, and a construction designed to withstand repeated service cycles. Always verify dimensions against your existing cartridge before ordering to ensure correct fit and performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Cryspool 04087 compatible with C-4995 and FC-2940?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it matches the key dimensions of C-4995 and FC-2940 style cartridges; verify measurements before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I clean this spa cartridge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Clean when the pressure gauge indicates higher resistance, typically every 4–8 weeks depending on use and water chemistry.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Cryspool","offers":[{"title":"Default Title","offer_id":56799335973204,"sku":"B0CJ8TZ41L","price":99.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/cryspool-front-packaging-04087.jpg?v=1786731420"},{"product_id":"pentair-strainer-pot-lid-replacement-355301-clear-oem-pool-pump-cover-leak-resistant-seal","title":"Pentair strainer pot lid replacement 355301 – clear OEM pool pump cover, leak-resistant seal","description":"\u003cp\u003e\u003cstrong\u003ePentair 355301 is a genuine replacement strainer pot lid designed to restore a secure, leak-resistant cover to compatible Pentair inground pool pumps.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement lid fits Pentair strainer pots and is intended to replace cracked, cloudy, or damaged covers that compromise pump performance and visibility. Made by Pentair, the OEM part maintains original fit and function so you can avoid makeshift fixes and reduce downtime. The lid helps preserve the basket chamber seal, lets you inspect debris without removing the lid, and works with existing clamps and gaskets when those components are in good condition.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this lid restore my pump’s functionality?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or broken strainer pot lid prevents air leaks and maintains proper suction so the pump runs as intended. A correct, tight-fitting lid also protects the skimmer basket area from contaminants and allows easy visual checks of debris build-up.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM Pentair fit reduces risk of misalignment or stress on clamps.\u003c\/li\u003e\n  \u003cli\u003eClear or translucent material enables quick basket inspection.\u003c\/li\u003e\n  \u003cli\u003ePreserves the pump’s original sealing surface for gaskets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich pumps and situations is the 355301 lid compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis lid is made for Pentair strainer pots used on many inground pool pumps; compatibility depends on the exact pump model and pot size. It’s intended as a direct replacement when the original lid is cracked, warped, or cloudy and when the pot’s threads or clamp surfaces match the OEM design.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Pentair inground pump strainer pots of matching diameter.\u003c\/li\u003e\n  \u003cli\u003eBest used when existing gasket and clamp are serviceable.\u003c\/li\u003e\n  \u003cli\u003eNot a universal fit — verify dimensions with your pump manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic pool pump maintenance: drain the strainer pot below the lid line, remove the old lid, inspect the gasket, then seat the replacement and secure the clamp or threads. Minimal tools are required, typically a screwdriver or wrench for the clamp and a soft cloth for cleaning sealing surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple hand tools — screwdriver or wrench for clamps.\u003c\/li\u003e\n  \u003cli\u003eReplace gasket if worn to ensure a proper seal.\u003c\/li\u003e\n  \u003cli\u003eInspect sealing surfaces and clean before installing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering this replacement lid?\u003c\/h3\u003e\n\u003cp\u003eConfirm the strainer pot diameter, clamp type, and whether your pump uses Pentair’s OEM lid design. Measure your existing lid or consult your pump’s parts diagram to ensure the 355301 matches; if in doubt, compare part numbers or contact a pool professional.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify part number on existing lid or pump parts list.\u003c\/li\u003e\n  \u003cli\u003eMeasure pot diameter and clamp engagement style.\u003c\/li\u003e\n  \u003cli\u003eEnsure gasket condition — replace gasket if brittle or flattened.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement strainer pot lid is aimed at pool owners, service technicians, and maintenance professionals who need an OEM-quality cover for Pentair inground pump systems. Choose the 355301 when your current lid shows cracks, leaks, or clouding and you want a direct Pentair replacement to maintain pump reliability and safe, inspectable operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Pentair 355301 lid an OEM part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 355301 is a genuine Pentair replacement designed to match original fit and function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a new gasket when replacing the lid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If the existing gasket is cracked, flattened, or brittle, replace it to ensure a proper seal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":56799374901588,"sku":"B001F5FWL6","price":84.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/pentair-355301-front-view-lid.jpg?v=1786731811"},{"product_id":"pentair-intelliflo-whisperflo-diffuser-3-0hp-replacement-072928z-black-polymer-oem-fit-for-restored-flow-quiet-operation","title":"Pentair IntelliFlo\/WhisperFlo Diffuser 3.0hp Replacement 072928Z — Black Polymer, OEM Fit for Restored Flow \u0026 Quiet Operation","description":"\u003cp\u003e\u003cstrong\u003ePentair’s 072928Z black diffuser is a direct-replacement diffuser assembly for 3.0hp IntelliFlo and WhisperFlo inground pool and spa pumps.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis engineered diffuser restores the internal flow path and seals critical clearances inside Pentair IntelliFlo and WhisperFlo 3.0hp pumps. Built to OEM specifications, the black polymer assembly helps maintain hydraulic performance and quiet operation when the original diffuser is worn, cracked, or missing. It’s a straightforward part intended for technicians and DIYers who want to return pump internals to factory geometry without replacing the entire wet end.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this diffuser affect pump performance?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing a damaged or degraded diffuser ensures the pump maintains intended hydraulic balance and reduces turbulence that can cause noise and efficiency loss. The part re-establishes the correct spacing between the impeller and diffuser vanes so the pump operates near its designed flow curve.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRestores OEM internal geometry for reliable flow and pressure.\u003c\/li\u003e\n  \u003cli\u003eReduces cavitation and vibration that hurt efficiency.\u003c\/li\u003e\n  \u003cli\u003eHelps preserve quiet operation typical of IntelliFlo\/WhisperFlo models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this diffuser fit my pump model and how do I confirm compatibility?\u003c\/h3\u003e\n\n\u003cp\u003eThis diffuser is specified for Pentair IntelliFlo and WhisperFlo pumps rated at 3.0 horsepower and is sold under part number 072928Z. Confirm compatibility by matching your pump model and horsepower rating, and by comparing the existing diffuser’s mounting features to the replacement.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for Pentair IntelliFlo\/WhisperFlo 3.0hp wet ends.\u003c\/li\u003e\n  \u003cli\u003ePart number: 072928Z — match this to your parts list.\u003c\/li\u003e\n  \u003cli\u003eVisual match: black polymer body and factory mounting slots.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are typically needed?\u003c\/h3\u003e\n\n\u0026gt; \u003cp\u003eInstalling the diffuser is a moderate DIY task for someone comfortable disassembling the pump wet end; it usually requires basic hand tools and reassembly care to maintain seals. Drain and isolate the pump, remove the pump housing and old diffuser, install the new diffuser ensuring correct orientation, then reassemble with new gaskets if needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCommon tools: screwdrivers, socket set, and possibly a strap wrench for housings.\u003c\/li\u003e\n  \u003cli\u003eReplace O-rings\/gaskets during reassembly to prevent leaks.\u003c\/li\u003e\n  \u003cli\u003eFollow pump manual torque and alignment guidance for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I inspect after installing the new diffuser?\u003c\/h3\u003e\n\n\u003cp\u003eAfter reassembly, check for leaks, listen for unusual noise, and verify the pump reaches expected pressure and flow. A short test run under normal conditions confirms proper seating and restores efficient operation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInspect for leaks around the housing and diffuser seam.\u003c\/li\u003e\n  \u003cli\u003eListen for reduced vibration and typical quiet operation.\u003c\/li\u003e\n  \u003cli\u003eCompare pool circulation performance to pre-replacement benchmarks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool service professionals, maintenance technicians, and experienced homeowners who need an OEM-spec replacement diffuser for Pentair IntelliFlo or WhisperFlo 3.0hp inground pumps. If your pump shows signs of worn internals, persistent noise, or reduced hydraulic performance, this 072928Z diffuser provides a cost-effective way to restore proper operating geometry without buying a complete wet end.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this diffuser compatible with IntelliFlo and WhisperFlo pumps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This 072928Z diffuser is made for Pentair IntelliFlo and WhisperFlo 3.0hp inground pump wet ends.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need additional parts to install the diffuser?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You should inspect and typically replace O-rings or gaskets during reassembly, but no other special parts are normally required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":56799403737428,"sku":"B004YLKSCG","price":87.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/pentair-diffuser-front-assembly.jpg?v=1786732272"},{"product_id":"ucarsoon-270068-1-5-inch-multiport-pool-valve-assembly-hi-flow-top-side-replacement-with-o-ring","title":"UcarSoon 270068 1.5-Inch Multiport Pool Valve Assembly — Hi-Flow Top\/Side Replacement with O-Ring","description":"\u003cp\u003e\u003cstrong\u003eUcarSoon 270068 is a direct-replacement 1-1\/2-inch multiport pool valve assembly engineered to fit Hi-Flow top and side mount multiport valves for pools and spas.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement valve assembly restores multiport function for filtration systems that use the Pen-tair\/Hi-Flow 1.5\" style top or side mount valves. Crafted to match the original mounting dimensions and flow ports, the UcarSoon 270068 lets you swap out a worn or damaged assembly in minutes without cutting pipe or modifying the valve body. The package includes the valve assembly, a replacement O-ring and two identification labels; no printed installation manual is included, so basic mechanical familiarity is helpful.\u003c\/p\u003e\n\n\u003ch3\u003eWill this part fit my Hi-Flow top or side mount multiport valve?\u003c\/h3\u003e\n\u003cp\u003eThe UcarSoon 270068 is designed specifically for Hi-Flow 1.5\" top and side mount multiport valves and measures about 5.28 inches in overall diameter. Confirm your existing valve type and port size before ordering to ensure compatibility. If your valve uses the same bolt pattern and 1-1\/2\" ports, this unit should align and seal correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDiameter: approximately 5.28 inches\u003c\/li\u003e\n  \u003cli\u003ePort size: 1-1\/2 inch (compatible with Hi-Flow 1.5\" systems)\u003c\/li\u003e\n  \u003cli\u003eMounting: top and side mount configurations supported\u003c\/li\u003e\n  \u003cli\u003eCompatibility check: verify model numbers and dimensions prior to purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a simple swap: remove the old assembly, seat the supplied O-ring, and fasten the new valve assembly in place. Most installations require only basic tools and moderate mechanical skill. Because no printed directions are included, follow common safety steps—shut off pump and depressurize the plumbing—before starting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: screwdriver or socket set for fasteners\u003c\/li\u003e\n  \u003cli\u003ePrep: turn off power and relieve system pressure\u003c\/li\u003e\n  \u003cli\u003eSeal: use the included O-ring to prevent leaks\u003c\/li\u003e\n  \u003cli\u003eTesting: cycle valve positions and check for dripping after reinstall\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and are there any installation cautions?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one valve assembly, one O-ring and two adhesive labels for position marking. There is no printed installation guide in the box, so have online resources or a service manual handy if you need step-by-step instructions. Always confirm part fit before committing to installation to avoid returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 valve assembly, 1 O-ring, 2 labels\u003c\/li\u003e\n  \u003cli\u003eNot included: printed installation instructions or tools\u003c\/li\u003e\n  \u003cli\u003eCaution: verify cross-compatibility with your valve body and plumbing size\u003c\/li\u003e\n  \u003cli\u003eTip: photograph original assembly orientation for accurate reinstall\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and leak-resistant is this replacement assembly?\u003c\/h3\u003e\n\u003cp\u003eBuilt to match OEM dimensions and port alignment, the assembly is intended to form a reliable seal when installed with the supplied O-ring and properly torqued fasteners. Performance depends on correct fitment, undamaged valve body surfaces, and secure fastening. Replace any cracked valve body components or degraded gaskets to maximize longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSeal: new O-ring included for improved leak prevention\u003c\/li\u003e\n  \u003cli\u003eMaterial match: designed to fit OEM-style housings and ports\u003c\/li\u003e\n  \u003cli\u003eLongevity: depends on installation quality and valve body condition\u003c\/li\u003e\n  \u003cli\u003eMaintenance: inspect seals and fasteners periodically for wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The UcarSoon 270068 replacement assembly is aimed at pool owners, maintenance professionals and service technicians who need a direct-fit multiport valve head for Hi-Flow 1.5\" top or side mount systems. It's especially useful for anyone replacing a cracked or non-functional valve assembly who prefers a like-for-like swap using the original mounting pattern and port size. If you’re unsure about compatibility or lack installation experience, consult your pool technician or compare model numbers and measurements before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this valve fit both top and side mount Hi-Flow models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the UcarSoon 270068 is made for Hi-Flow 1.5\" top and side mount multiport valve bodies, but verify your valve dimensions first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is an O-ring included and are instructions provided?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: An O-ring and two labels are included; no printed installation instructions are supplied.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"UcarSoon","offers":[{"title":"Default Title","offer_id":56799409602900,"sku":"B0BLBZKWRX","price":65.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/ucarsoon-valve-front-assembly.jpg?v=1786732421"},{"product_id":"edou-submersible-pool-cover-pump-850-gph-75w-compact-drain-pump-with-16ft-kink-resistant-hose","title":"EDOU Submersible Pool Cover Pump 850 GPH — 75W Compact Drain Pump with 16ft Kink‑Resistant Hose","description":"\u003cp\u003e\u003cstrong\u003eThe EDOU Direct Submersible Pool Cover Pump is a compact, 850 GPH-capable electric pump designed to remove standing water quickly from above-ground and inground pool covers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen snow, rain, or debris accumulate on a pool cover, pooled water can stress the cover and create cleanup headaches. The EDOU cover pump is built to sit upright fully submerged and move large volumes of water fast, using a 75 W motor and included 16-foot kink-resistant hose for straightforward, no-fuss drainage. It pairs a rugged ABS shell and safety features with simple adapters, making it ready for seasonal cover maintenance and emergency water removal.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast will this pump remove cover water?\u003c\/h3\u003e\n\n\u003cp\u003eThe EDOU pump can clear up to 850 gallons per hour under proper conditions, outpacing many comparable models. Real-world speed depends on hose run length, outlet height, and that at least two-thirds of the pump body remains submerged.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaximum flow: 850 GPH (subject to installation conditions)\u003c\/li\u003e\n  \u003cli\u003eMotor power: 75 W for efficient performance\u003c\/li\u003e\n  \u003cli\u003eRecommended water level: pump must be upright and at least 2\/3 submerged\u003c\/li\u003e\n  \u003cli\u003eHose impact: longer or elevated discharges will reduce flow rate\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and build features protect the pump during use?\u003c\/h3\u003e\n\n\u003cp\u003eEDOU designed the pump with a durable ABS housing and thermal control to reduce overheating risk during extended runs. A manual power switch makes operation intuitive, and users should unplug the unit when finished to avoid dry running and preserve internal components.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDurable ABS casing resists outdoor use and impacts\u003c\/li\u003e\n  \u003cli\u003eThermal protection helps prevent motor overheating\u003c\/li\u003e\n  \u003cli\u003eManual on\/off switch for easy control and safe handling\u003c\/li\u003e\n  \u003cli\u003eUnplug after use to prevent dry-run damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I set it up and connect the hose?\u003c\/h3\u003e\n\n\u003cp\u003eSetup is simple: place the pump upright and fully submerged, attach the included 16-foot kink-proof drainage hose, and select the correct adapter for your outlet. Keep the discharge hose straight and free of kinks or obstructions for reliable flow.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes two adapters for standard garden and drain hose fittings\u003c\/li\u003e\n  \u003cli\u003e16-foot kink-resistant hose included for flexible placement\u003c\/li\u003e\n  \u003cli\u003e25-foot power cord allows easy access to a 110 V outlet\u003c\/li\u003e\n  \u003cli\u003eAvoid tight bends, clogs, or raised hose loops to maintain output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this on both above-ground and inground pool covers?\u003c\/h3\u003e\n\n\u003cp\u003eYes. The pump is suitable for above-ground and inground covers as long as it sits upright and remains submerged to the minimum level recommended. Its compact footprint and adapters make it adaptable to most cover setups, while the included hose and cord simplify deployment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with above-ground and inground pool cover situations\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions (6.3 x 5.1 x 5.1 inches) for easy placement\u003c\/li\u003e\n  \u003cli\u003eWorks best when the pump is stable and submerged at least 2\/3\u003c\/li\u003e\n  \u003cli\u003eDo not allow the pump to float or operate dry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The EDOU Direct Submersible Pool Cover Pump fits homeowners and pool service providers who need a portable, no-nonsense solution for removing accumulated water from pool covers. It’s well suited to seasonal maintenance, storm cleanup, and routine cover care for both above-ground and inground pools when you want a compact, fast pump with user-friendly connections and safety-minded construction.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need any tools to install the pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No tools required; attach the included hose and adapter, place the pump upright submerged, and plug into a 110 V outlet.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What prevents the pump from overheating?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Built-in thermal protection and a manual switch help avoid overheating; always unplug after use and avoid dry running.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EDOU","offers":[{"title":"Default Title","offer_id":56799416320340,"sku":"B0817SRY4M","price":96.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/edou-pump-front-view.jpg?v=1786732491"},{"product_id":"bzcovac-pool-pump-strainer-housing-sp1516-replacement-for-hayward-power-flo-lx-ii-1-5-fip-1-5-mip-with-clear-lid-basket","title":"Bzcovac Pool Pump Strainer Housing SP1516 Replacement for Hayward Power-Flo LX \u0026 II, 1.5\" FIP × 1.5\" MIP with Clear Lid \u0026 Basket","description":"\u003cp\u003e\u003cstrong\u003eThis Bzcovac SP1516 strainer housing assembly replaces worn or cracked housings on Hayward Power-Flo LX and Power-Flo II pumps, restoring reliable water flow and filtration.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your above-ground pool pump is losing suction, leaking at the pre-filter, or the clear lid is clouded or cracked, the complete Bzcovac SP1516 kit provides a straightforward repair. Manufactured from impact-resistant ABS, the assembly includes the housing, a debris basket, a transparent lid for quick visual checks, and a resilient O-ring so you can swap the whole pre-filter section in one service stop. With standard 1.5-inch FIP inlet and 1.5-inch MIP outlet threads, it’s built to mate with common Hayward Power-Flo models and re-establish dependable circulation without modifying plumbing.\u003c\/p\u003e\n\n\u003ch3\u003eWill this housing fit my Hayward Power-Flo LX or Power-Flo II pump?\u003c\/h3\u003e\n\u003cp\u003eYes — the SP1516 from Bzcovac is crafted to match the mounting and threaded connections used on many Power-Flo series pumps. Check your pump model number and thread sizes before ordering to be certain of compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Power-Flo LX, Power-Flo II, and select SP15xx Hayward variants\u003c\/li\u003e\n  \u003cli\u003eThread sizes: 1.5\" FIP inlet and 1.5\" MIP outlet for direct plumbing match\u003c\/li\u003e\n  \u003cli\u003eDrop-in replacement design to align with original pump bolts and seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation for a DIY pool owner?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable turning off and draining the pump area. The assembly is supplied complete — housing, basket, lid, and O-ring — so you won’t need additional parts for a standard replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools required: basic wrench and plumber’s tape for threaded joins\u003c\/li\u003e\n  \u003cli\u003eSteps: depressurize pump, disconnect plumbing, unbolt old housing, swap components, tighten and test\u003c\/li\u003e\n  \u003cli\u003eTypical time: 20–45 minutes depending on accessibility and experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from this replacement kit?\u003c\/h3\u003e\n\u003cp\u003eThe SP1516 uses high-grade ABS engineered to endure pool chemicals and outdoor exposure. That resistance minimizes cracking, warping, and rapid degradation compared with lower-quality plastics, helping your pump maintain consistent performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHousing and lid: chemical-resistant ABS plastic\u003c\/li\u003e\n  \u003cli\u003eBasket: sturdy slotted design to capture leaves and debris without restricting flow\u003c\/li\u003e\n  \u003cli\u003eO-ring: resilient elastomer formulated for long-lasting, watertight seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does replacing the strainer housing help pump performance?\u003c\/h3\u003e\n\u003cp\u003eA solid, leak-free strainer housing is essential for priming and uninterrupted circulation. Replacing a cracked or leaking pre-filter prevents air intrusion, improves suction, and reduces strain on the motor and impeller—helping filtration work as designed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStops leaks that break prime and reduce flow\u003c\/li\u003e\n  \u003cli\u003eClears debris before it reaches impeller and filter components\u003c\/li\u003e\n  \u003cli\u003eRestores clear-view lid for quick basket checks without opening the system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this replacement kit for? Pool owners and maintenance professionals who operate Hayward Power-Flo LX or Power-Flo II pumps and need a reliable, cost-effective repair option will benefit from the Bzcovac SP1516 assembly. It’s tailored for above-ground systems and self-priming pumps where the original strainer housing is damaged, leaking, or no longer creating a proper seal. Choose this kit if you want a full swap with matching 1.5\" threaded connections, a clear inspection lid, and a durable ABS construction to extend the life and efficiency of your circulation system.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eIncluded features:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete replacement kit: housing, clear lid, debris basket, and O-ring\u003c\/li\u003e\n  \u003cli\u003eDurable ABS material resists pool chemicals and cracking\u003c\/li\u003e\n  \u003cli\u003eSecure 1.5\" FIP inlet and 1.5\" MIP outlet threaded connections\u003c\/li\u003e\n  \u003cli\u003eDesigned to restore pump efficiency and protect internal components\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year limited warranty; 30-day return policy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit my Hayward SP1580 pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the SP1516 assembly is compatible with many SP15xx Hayward models, including SP1580, when thread sizes match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are replacement O-rings included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes the sealing O-ring so you can install the housing without buying extra seals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bzcovac","offers":[{"title":"Default Title","offer_id":56799418581332,"sku":"B0GTPYTG2M","price":84.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/bzcovac-front-view-hayward-compatible-housing.jpg?v=1786732561"},{"product_id":"scale-wear-design-chilla-pool-aerator-chiller-for-1-5-returns-lowers-water-6-10-f-no-electricity","title":"Scale Wear Design CHILLA pool aerator chiller for 1.5\" returns — lowers water 6–10°F, no electricity","description":"\u003cp\u003e\u003cstrong\u003eCHILLA is a simple, no-electricity pool aeration fountain that lowers pool water temperature by 6–10°F using your existing return line.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to thread into a standard 1.5\" in-ground pool return, the Scale Wear Design CHILLA uses aeration and evaporative cooling to drop water temperatures over a few days without adding electrical load or expensive equipment. It installs in minutes, is removable, and can be combined with a second unit for larger pools or faster cooling. This approach offers a budget-friendly alternative to powered chillers while also providing an attractive fountain effect children enjoy and adults appreciate at night.\u003c\/p\u003e\n\n\u003ch3\u003eHow does CHILLA lower my pool temperature without electricity?\u003c\/h3\u003e\n\u003cp\u003eCHILLA redirects water through a fountain-style aerator so surface water sprays and mixes with drier air, increasing evaporation and releasing heat. Over 48–72 hours of regular circulation you’ll see measurable cooling, especially when run overnight or during lower-humidity periods.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates using your pool pump and 1.5\" return line — no extra power draw.\u003c\/li\u003e\n  \u003cli\u003eAeration increases evaporation, which removes heat from the pool water.\u003c\/li\u003e\n  \u003cli\u003eMost effective when run continuously or during cooler night hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill CHILLA fit my pool and how do I install it?\u003c\/h3\u003e\n\u003cp\u003eThe chiller is designed for standard 1.5\" threaded in-ground pool returns; measure your return to confirm compatibility before ordering. Installation requires unscrewing the existing 1.5\" cap, attaching the supplied 1.5\" adapter, and pressing the fountain into place — no gluing or permanent modifications needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 1.5\" female threaded returns commonly found on in-ground pools.\u003c\/li\u003e\n  \u003cli\u003eNo glue: screw in adapter, press in fountain, and it's ready to run.\u003c\/li\u003e\n  \u003cli\u003eClose unused return ports with 1.5\" plugs to maximize flow through the CHILLA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much cooling can I expect and how long will it take?\u003c\/h3\u003e\n\u003cp\u003eExpect a temperature drop in the range of about 6–10°F when correctly sized for your pool; results depend on pool volume, sun exposure, humidity, and pump runtime. Typically the effect becomes noticeable within 2–3 days; installing a second unit helps larger pools reach lower temperatures faster.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical cooling: 6–10°F under favorable conditions.\u003c\/li\u003e\n  \u003cli\u003eVisible change often in 48–72 hours of consistent use.\u003c\/li\u003e\n  \u003cli\u003eInstall two units for larger pools or quicker temperature reduction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs CHILLA safe, and will it affect my pool system?\u003c\/h3\u003e\n\u003cp\u003eCHILLA is non-powered and designed to work with standard pool returns, minimizing risk to equipment. It sits in the return line and should not require plumbing changes, but always follow the included installation video and ensure secure fittings to prevent leaks or flow restriction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-electric design avoids additional power draw or wiring.\u003c\/li\u003e\n  \u003cli\u003eRemovable and non-permanent — no chemical or structural changes.\u003c\/li\u003e\n  \u003cli\u003eFollow instructions and watch the installation video for correct setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? CHILLA is ideal for pool owners seeking an affordable, low-maintenance way to cool in-ground pools without buying a powered chiller. It's a good choice for families who want a playful fountain feature for kids, owners who want quieter night-time water sounds, and anyone looking to shave several degrees off pool temperature while keeping operating costs minimal. Measure your return fitting, consider your pool size, and add a second unit if you have a large volume or want faster results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I see the pool temperature drop?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You should notice cooling within 48–72 hours of continuous use; results vary with pool size and weather.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools or glue to install CHILLA?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No glue required — unscrew the 1.5\" cap, screw in the adapter, and press the fountain into place.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Scale Wear Design","offers":[{"title":"Default Title","offer_id":56799456330068,"sku":"B0CWDQLC1Y","price":92.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/scale-wear-design-chilla-front-view.jpg?v=1786733142"},{"product_id":"fmoacen-pool-ladder-weights-stabilizers-2-pack-hdpe-23-6-14-3-in-with-12-adjustable-straps-water-or-sand-fillable","title":"FMOACEN Pool Ladder Weights Stabilizers — 2-Pack HDPE 23.6×14×3 in with 12 Adjustable Straps, Water or Sand Fillable","description":"\u003cp\u003e\u003cstrong\u003eThese FMOACEN HDPE fillable ladder weights stabilize and anchor pool ladders using water or sand for quick, secure support.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pool ladder shifts or feels unstable, this two-piece stabilizer kit offers a simple way to reduce movement and increase confidence when entering or exiting the water. Each lightweight high-density polyethylene (HDPE) block holds water, sand, or soil and fastens to ladder handrails with adjustable straps. The system is built to resist weather and impact while remaining easy to install, remove, and store when not in use.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these ladder weights attach and stay in place?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: fill the HDPE containers, close the secure caps, and wrap the included Velcro straps around the ladder rail. The straps adjust to fit most handrails and keep the weights positioned under or behind the ladder steps to resist tipping and sliding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 12 Velcro straps for flexible attachment points.\u003c\/li\u003e\n  \u003cli\u003e0.59-inch fill port with tight-seal cap prevents leaks.\u003c\/li\u003e\n  \u003cli\u003eAdjustable strap length fits a wide range of ladder rail diameters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat filling options are recommended and how do they affect performance?\u003c\/h3\u003e\n\u003cp\u003eYou can fill each 2.05 L container with water, sand, or soil depending on how much ballast you need. Water is the quickest and easiest option for everyday use, while sand or soil adds more permanent weight for stronger anchoring in windy or heavy-use situations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWater for fast setup and easy draining for storage.\u003c\/li\u003e\n  \u003cli\u003eSand or soil for increased anchoring mass when needed.\u003c\/li\u003e\n  \u003cli\u003eEmpty for transport—each block is lightweight when dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these weights compatible with above-ground and in-ground ladders?\u003c\/h3\u003e\n\u003cp\u003eThe design works with both above-ground and in-ground pool ladders, offering universal stabilization for most common ladder styles. The slim rectangular form fits discreetly under steps or alongside rails so it doesn’t interfere with normal ladder use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize: 23.6 x 14 x 3 inches to fit beneath or beside ladder steps.\u003c\/li\u003e\n  \u003cli\u003eDurable HDPE material resists pool chemicals and UV exposure.\u003c\/li\u003e\n  \u003cli\u003eTwo-piece set provides balanced support for typical residential ladders.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and low-maintenance are these stabilizers?\u003c\/h3\u003e\n\u003cp\u003eMade from waterproof HDPE, the blocks are built to withstand impact and outdoor conditions while remaining easy to clean. Drain and store them during winter or when not in use to extend lifespan and prevent frost damage in colder climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImpact- and weather-resistant HDPE construction.\u003c\/li\u003e\n  \u003cli\u003eLightweight when empty for simple handling and storage.\u003c\/li\u003e\n  \u003cli\u003eWipe clean with mild detergent; fully drain before long-term storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners who want an inexpensive, non-permanent way to reduce ladder movement and increase safety will benefit most. The kit suits families with children, rental properties, seasonal pools, and anyone seeking a tool-free stabilizer that’s easy to install, refill, and remove. Choose water for quick convenience or sand\/soil when heavier anchoring is required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much do the weights hold?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each HDPE block holds about 2.05 liters; fill with water, sand, or soil to change ballast.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my ladder rails?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—adjustable Velcro straps secure to most common ladder rail diameters for both above-ground and in-ground pools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FMOACEN","offers":[{"title":"Default Title","offer_id":56799460065620,"sku":"B0F93B2ZJ3","price":92.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/fmoacen-front-view-filled-pool-ladder-weights.jpg?v=1786733196"},{"product_id":"etna-hot-surface-igniter-gasket-replacement-kit-77707-0054-oem-style-for-pentair-sta-rite-heaters","title":"Etna hot surface igniter \u0026 gasket replacement kit 77707-0054 — OEM-style for Pentair\/Sta‑Rite heaters","description":"\u003cp\u003e\u003cstrong\u003eETNA 77707-0054 is a direct-replacement hot surface igniter and gasket kit engineered to restore reliable ignition for Pentair\/Sta-Rite pool and spa heaters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Pentair Sta-Rite Max-E-Therm or Pentair Master Temp heater is failing to light or is showing intermittent ignition, this ETNA kit supplies the same OEM-style igniter and gasket that were factory test fired to match original performance. The components are fragile and should be handled carefully during installation. The kit is designed to match fit and function, minimizing downtime and helping your heater return to consistent operation without the need to replace the entire control assembly.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this replacement kit address ignition problems?\u003c\/h3\u003e\n\u003cp\u003eThe hot surface igniter provides the high temperature element needed to reliably light the burner; the included gasket seals the combustion chamber to maintain correct air\/fuel conditions. Replacing a cracked or worn igniter often eliminates failure-to-ignite errors and reduces cycling caused by leak-induced pressure or temperature anomalies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OEM-style hot surface igniter built to the original specifications.\u003c\/li\u003e\n  \u003cli\u003eNew combustion gasket restores proper sealing and airflow.\u003c\/li\u003e\n  \u003cli\u003eFactory test-fired igniter for predictable performance from first install.\u003c\/li\u003e\n  \u003cli\u003eFits both Pentair Sta-Rite Max-E-Therm and Master Temp heater models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about handling and installing the igniter?\u003c\/h3\u003e\n\u003cp\u003eThese igniters are ceramic and glass-based, making them highly effective but also fragile. Handle only by the connector or mounting flange; avoid touching the heated surface and protect the element from impact or twisting. If you’re not comfortable with electrical and gas\/heater work, professional installation is recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWear gloves and avoid direct contact with the hot surface element.\u003c\/li\u003e\n  \u003cli\u003eDisconnect power and follow heater manufacturer safety steps before starting.\u003c\/li\u003e\n  \u003cli\u003eUse the original mounting points and torque specifications where applicable.\u003c\/li\u003e\n  \u003cli\u003eInspect wiring and connections; replace damaged leads to prevent misfires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my Pentair or Sta-Rite heater model?\u003c\/h3\u003e\n\u003cp\u003eThis ETNA 77707-0054 kit is specified to fit Pentair Sta-Rite Max-E-Therm and Pentair Master Temp pool and spa heaters. It’s intended as a direct replacement for the OEM igniter and companion gasket; confirm model and part compatibility before purchasing to ensure correct fit and function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Pentair Sta-Rite Max-E-Therm models.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Pentair Master Temp heater models.\u003c\/li\u003e\n  \u003cli\u003eIncludes parts that match original factory-tested igniter performance.\u003c\/li\u003e\n  \u003cli\u003eCheck your heater model number and service manual for part confirmation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This ETNA replacement kit is aimed at pool and spa owners, service technicians, and facilities managers who need a reliable, OEM-style fix for heaters that are failing to ignite or are showing ignition-related faults. It’s best suited for anyone seeking a cost-effective repair that restores original ignition behavior without replacing the entire heater module. Because the igniter is fragile, those without experience in appliance or gas-heater repairs should consider professional installation to ensure safety and proper operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this igniter kit compatible with my Pentair Master Temp heater?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ETNA 77707-0054 kit is specified to fit Pentair Master Temp and Sta-Rite Max-E-Therm heaters — verify your model number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the igniter myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can if you’re comfortable with basic electrical and heater safety steps, but professional installation is recommended due to the component’s fragility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Etna","offers":[{"title":"Default Title","offer_id":56799460196692,"sku":"B00U6CSECI","price":70.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/etna-igniter-kit-front-packaging.jpg?v=1786733193"},{"product_id":"hayward-strainer-cover-replacement-spx1500d2a-with-o-ring-direct-fit-for-power-flo-sp1500-pumps-durable-oem-molded-seal","title":"Hayward strainer cover replacement SPX1500D2A with O-ring — direct-fit for Power-Flo \u0026 SP1500 pumps, durable OEM-molded seal","description":"\u003cp\u003e\u003cstrong\u003eHayward SPX1500D2A is a direct-fit strainer cover replacement with included O-ring for select Hayward Power-Flo pumps and compatible pool filter models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement strainer cover restores a secure, leak-resistant seal to older or damaged Hayward pump\/lid assemblies without the expense of a new pump. Molded to match OEM dimensions and supplied with the matching O-ring, it suits a range of Power-Flo LX, Power-Flo II and SP1500 series pumps as well as several Hayward Easy-Clear, Perflex, Pro and VL filter models. The cover is a durable, factory-compatible part that helps maintain flow and keeps the strainer basket enclosed for safer, cleaner operation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Hayward pumps and filters will this cover fit?\u003c\/h3\u003e\n\u003cp\u003eThe SPX1500D2A was designed to fit many common Hayward pump and filter models so you can replace a worn lid quickly. Confirm compatibility by matching your pump model number to the list below or by checking the physical lid dimensions against your existing cover.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePower-Flo LX SP1580 series: SP1575LX, SP1580, SP1580X15, SP1520UN, EP1500LX, SP1680\u003c\/li\u003e\n  \u003cli\u003ePower-Flo II SP1700 series: SP1705, SP1710, SP1711, SP1720, SP1725, SP1750, SP1775, SP1780, S166T1580S\u003c\/li\u003e\n  \u003cli\u003ePower-Flo SP1500 series and strainers: SP1500, SP1510, SP1511, SP1550, SP1575, EP1500, SP1516\u003c\/li\u003e\n  \u003cli\u003eCompatible filters: Easy-Clear, Perflex, Pro and VL Series (examples: C5501575XES, EC301540ESNVTL, S144T1540S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install the replacement cover?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for most pool owners and requires only basic tools and a clean sealing surface. Remove the old lid and O-ring, clean the pump housing flange, seat the provided O-ring into its groove, and secure the new cover; follow your pump’s manual torque guidelines to avoid overtightening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes matching O-ring to ensure a proper seal\u003c\/li\u003e\n  \u003cli\u003eSimple hand-tightening or light wrench torque as per pump instructions\u003c\/li\u003e\n  \u003cli\u003eWorks with existing strainer basket—no basket replacement required\u003c\/li\u003e\n  \u003cli\u003eWeighs approximately 7.9 pounds for shipping and handling reference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and longevity can I expect from this part?\u003c\/h3\u003e\n\u003cp\u003eThe cover is made to Hayward-compatible specifications for chemical and UV resistance suitable for normal pool and spa environments. While not a cosmetic upgrade, it’s built to withstand typical chlorinated and salt-water systems when installed and maintained correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable molded construction resists pool chemicals and sunlight\u003c\/li\u003e\n  \u003cli\u003eDesigned to match OEM tolerances to maintain flow and pressure\u003c\/li\u003e\n  \u003cli\u003eO-ring included to reduce immediate leak risks after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this cover affect pump performance or warranty?\u003c\/h3\u003e\n\u003cp\u003eReplacing a cracked or leaking cover with the proper-fit SPX1500D2A helps restore normal pump function by preventing air entry and maintaining prime, but it does not alter pump ratings or upgrade performance. For warranty concerns, check your pump’s original documentation; using compatible OEM-style parts typically preserves normal operation but may not extend original warranties.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps prevent air leaks that cause cavitation and loss of prime\u003c\/li\u003e\n  \u003cli\u003eDoes not change pump horsepower or flow specifications\u003c\/li\u003e\n  \u003cli\u003eCheck manufacturer warranty terms for part replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This replacement Hayward strainer cover is intended for pool owners, service technicians and maintenance professionals who need a reliable, cost-effective lid swap for compatible Power-Flo and SP1500-series pumps and several Hayward filter models. It’s ideal if your original cover is cracked, warped, missing the O-ring groove, or leaking—providing a quick restore to secure, leak-free operation without replacing the entire pump assembly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this cover include the O-ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the SPX1500D2A replacement includes the matching O-ring for a proper seal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this cover on SP1580 and SP1705 pumps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits many Power-Flo LX SP1580 and Power-Flo II SP1700 series models listed in the product details.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":56799472943444,"sku":"B0038KSSHG","price":67.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hayward-spx1500d2a-front-view.jpg?v=1786733354"},{"product_id":"zodiac-polaris-280-replacement-bottom-shell-white-with-bracket-oem-fit-for-280-280-vac-sweep","title":"Zodiac Polaris 280 Replacement Bottom Shell — White with Bracket, OEM Fit for 280 \u0026 280 Vac‑Sweep","description":"\u003cstrong\u003eReplacement Zodiac Polaris bottom for 280 and 280 Vac-Sweep pool cleaners, supplied in white and fitted with the necessary bracket.\u003c\/strong\u003e\n\nThis genuine Zodiac component restores the lower housing of Polaris 280 and 280 Vac-Sweep cleaners, providing a quick way to repair or refresh the unit without buying a full replacement. Made to match factory specifications, the part is supplied in white and arrives ready to install with the included mounting bracket. Lightweight and easy to handle at about 1 pound, it is ideal for homeowners and pool technicians who need a reliable OEM part to keep suction and navigation performing as intended.\n\n\u003ch3\u003eHow does this bottom piece replace a worn or damaged part?\u003c\/h3\u003e\n\u003cp\u003eThe unit is designed to match Zodiac's original dimensions and attachment points so removal of the old lower shell and fitting of this replacement is straightforward. Installing the included bracket ensures correct alignment with the cleaner's drive and wheel assemblies, restoring structural support and housing function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OEM-fit for Polaris 280 and 280 Vac-Sweep models\u003c\/li\u003e\n  \u003cli\u003ePre-drilled and shaped to align with factory fasteners\u003c\/li\u003e\n  \u003cli\u003eBracket included for immediate installation\u003c\/li\u003e\n  \u003cli\u003eWhite finish matches many existing cleaner bodies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part help if my cleaner is leaking or scraping?\u003c\/h3\u003e\n\u003cp\u003eYes — a cracked or warped bottom can cause leaks, poor suction, or contact with pool surfaces. Replacing the damaged lower housing with this genuine Zodiac piece eliminates gaps and restores the intended clearance to reduce scraping and maintain water flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSeals properly to reduce unintended water ingress\u003c\/li\u003e\n  \u003cli\u003eRestores original ground clearance to prevent scuffing\u003c\/li\u003e\n  \u003cli\u003eSupports internal components to preserve suction efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is involved in installing the replacement bottom?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically requires basic tools and a short period out of the water. Remove the old shell, transfer any reusable components, secure the new bottom with the supplied bracket, and confirm that wheels and hoses align correctly before returning the cleaner to service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic hand tools usually suffice (screwdriver, pliers)\u003c\/li\u003e\n  \u003cli\u003eBracket included to speed alignment and mounting\u003c\/li\u003e\n  \u003cli\u003eLightweight design (about 1 lb) simplifies handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part work with other Polaris models or accessories?\u003c\/h3\u003e\n\u003cp\u003eThis bottom is manufactured specifically for the Polaris 280 and 280 Vac-Sweep models; it is not intended as a universal fit. For other Polaris series or newer models, verify compatibility with part numbers or consult Zodiac documentation to ensure correct replacement selection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntended for Polaris 280 and 280 Vac-Sweep only\u003c\/li\u003e\n  \u003cli\u003eNot guaranteed to fit different series or redesigned models\u003c\/li\u003e\n  \u003cli\u003eCheck model plate or manual if unsure about compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThis genuine Zodiac bottom is aimed at pool owners, maintenance professionals, and repair shops who want an authentic, factory-spec replacement for a Polaris 280 or 280 Vac-Sweep cleaner. If your cleaner shows signs of wear, cracks, scraping against pool surfaces, or you need to restore correct component alignment and suction performance, this easy-to-handle, bracket-included part provides a straightforward repair option without the cost of replacing the entire unit. It’s also useful for keeping a spare part on hand for quick turnaround during peak pool season.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this bottom an original Zodiac part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This is a genuine Zodiac replacement made to factory specifications for Polaris 280 and 280 Vac-Sweep models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the bracket come included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The replacement bottom is supplied with the necessary bracket for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":56799473107284,"sku":"B004VU8RZ0","price":92.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/zodiac-polaris-bottom-front-view.jpg?v=1786733355"},{"product_id":"guojinjism-handle-piston-assembly-for-2-inch-hayward-style-slide-valve-spx0410ba-stainless-shaft-polymer-piston","title":"GUOJINJISM Handle \u0026 Piston Assembly for 2-inch Hayward-Style Slide Valve SPX0410BA — Stainless Shaft, Polymer Piston","description":"\u003cp\u003e\u003cstrong\u003eThe GUOJINJISM SPX0410BA Handle \u0026amp; Piston Assembly is a drop-in repair kit that restores smooth, leak-free backwash and filtration switching for 2\" Hayward-style slide valves.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pool or spa backwash slide valve has become stiff, leaks, or no longer seals reliably, this repair kit replaces the worn shaft and piston with reinforced components engineered for long service life. Built to match the fit and function of Hayward SPX0410BA-style valves and compatible models, the assembly uses a stainless steel shaft and precision-molded polymer piston to bring back easy manual operation without special tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this assembly fix a sticky or leaking backwash valve?\u003c\/h3\u003e\n\u003cp\u003eWear on the old shaft and piston often creates friction, poor sealing, and sticky push-pull action. This replacement provides a smooth, properly sized piston and a reinforced stainless steel shaft to eliminate binding and restore proper internal clearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-molded piston tolerances reduce internal drag\u003c\/li\u003e\n  \u003cli\u003eStainless steel shaft resists bending and corrosion\u003c\/li\u003e\n  \u003cli\u003eUpdated piston clearance improves seal consistency\u003c\/li\u003e\n  \u003cli\u003eReduces valve stiffness and prevents hard sticking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my Hayward Pro-Grid or Micro-Clear filter?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit is designed as a direct replacement for SPX0410BA and equivalent OEM numbers, matching the form factor used in many Hayward 2\" slide valves. It fits popular valve housings found on Pro-Grid D.E. and Micro-Clear D.E. filter models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Hayward 2\" slide valves and SP0740DE housings\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for part SPX0410BA and CMP 25831-000-100\u003c\/li\u003e\n  \u003cli\u003eWorks with PR models SP0410X502S and SP0410X602S\u003c\/li\u003e\n  \u003cli\u003eDesigned to integrate with existing valve nuts and retainers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intentionally simple: the kit uses a pull-and-replace approach that most pool owners can complete quickly. No specialty tools or professional machining are required — basic hand tools are sufficient for removal and reassembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUnscrew the locking nut, remove old assembly, insert new unit\u003c\/li\u003e\n  \u003cli\u003eHand-tighten or use common pliers for final seating\u003c\/li\u003e\n  \u003cli\u003eNo adhesive or machining needed — instant water-tight seal\u003c\/li\u003e\n  \u003cli\u003eTypical install time: under 20 minutes for experienced owners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability improvements does this kit offer?\u003c\/h3\u003e\n\u003cp\u003eThe kit pairs a reinforced stainless steel shaft with high-quality polymer components to deliver both strength and smooth operation. These materials help the valve resist wear, reduce pinhole leaks from fatigue, and maintain reliable performance season after season.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable stainless steel shaft for torsional strength and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003ePremium polymer piston for low-friction movement and tight sealing\u003c\/li\u003e\n  \u003cli\u003ePrecision molding reduces dimensional wear and wobble\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand repeated backwash cycles without binding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool and spa owners, facility maintenance technicians, and DIY repairers who use Hayward 2\" backwash slide valves and need a durable, direct-replacement piston and handle assembly. It’s ideal for anyone wanting to restore smooth, leak-free backwash operation quickly and affordably without replacing the entire valve body.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a direct replacement for Hayward SPX0410BA?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The GUOJINJISM kit is designed as a direct replacement and matches common OEM numbers for Hayward 2\" slide valves.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required; basic hand tools like pliers or a wrench are sufficient for removal and reinstallation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GUOJINJISM","offers":[{"title":"Default Title","offer_id":56799473828180,"sku":"B0DRPB9DC4","price":66.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/guojinjism-front-packaging-spx0410ba.jpg?v=1786733384"},{"product_id":"hayward-locking-knob-for-star-clear-plus-c900-c1200-hand-tight-replacement-restores-seal","title":"Hayward Locking Knob for Star-Clear Plus C900\/C1200 — Hand-Tight Replacement Restores Seal","description":"\u003cp\u003e\u003cstrong\u003eThe Hayward Locking Knob is a direct replacement knob designed to securely fasten Star-Clear Plus cartridge filters (C900, C1200 and compatible models) for reliable, leak-resistant operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a pool filter’s locking assembly becomes worn, stripped or lost, swapping in a compatible replacement knob restores proper clamping force and helps keep the filter cartridge sealed. This replacement part is made to fit Hayward Star-Clear Plus cartridge filters — including models C900 and C1200 — and the separation tank variant, providing a straightforward repair option that avoids costly full-head replacements. The unit weighs approximately 4.3 pounds and installs without specialized tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this knob restore filter performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a damaged or missing knob brings back the correct tension on the filter lid, which helps maintain a proper seal and reduces the chance of leaks or air entering the system. The knob is shaped to provide positive engagement with the locking post so the lid stays firmly seated during pump operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact fit for Star-Clear Plus locking post geometry\u003c\/li\u003e\n  \u003cli\u003eRestores even clamping pressure around the lid\u003c\/li\u003e\n  \u003cli\u003eHelps prevent bypass and air infiltration into the cartridge\u003c\/li\u003e\n  \u003cli\u003eQuick hand-tight installation — no adhesives required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this knob work with my Hayward cartridge filter?\u003c\/h3\u003e\n\u003cp\u003eThis knob is intended specifically for Hayward Star-Clear Plus cartridge filters, including models C900 and C1200, and the compatible separation tank (CX900G-compatible applications). Confirm your filter model number before ordering to ensure compatibility. If your filter uses a different locking system or brand, this knob may not fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with C900 and C1200 Star-Clear Plus models\u003c\/li\u003e\n  \u003cli\u003eFits the separation tank configuration used with similar Hayward systems\u003c\/li\u003e\n  \u003cli\u003eNot universal — check model stamping on the filter housing\u003c\/li\u003e\n  \u003cli\u003eImages and part numbers help verify compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be user-friendly. In most cases the knob threads onto the existing locking post and secures by hand; no specialized tools are necessary. If the existing post is damaged, minimal cleaning or replacement of the post may be required for a secure fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-tighten knob for normal use\u003c\/li\u003e\n  \u003cli\u003eNo glue or sealant required for standard replacement\u003c\/li\u003e\n  \u003cli\u003eMay require light cleaning of threads prior to installation\u003c\/li\u003e\n  \u003cli\u003eRefer to your filter manual for torque guidance if available\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect for durability and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe part is intended as a durable service replacement for routine pool maintenance. While not a wear item like a cartridge, it can deteriorate over many seasons from UV exposure, chemical contact or repeated over-tightening. Inspect the knob and locking post periodically and replace if you notice cracking, excessive play, or stripped threads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable under normal pool chemical conditions\u003c\/li\u003e\n  \u003cli\u003eResistant to routine wear but susceptible to UV aging over years\u003c\/li\u003e\n  \u003cli\u003eReplace if threads are worn or knob cracks\u003c\/li\u003e\n  \u003cli\u003eLight maintenance: rinse and inspect during seasonal cartridge checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool owners, maintenance technicians and DIY-minded consumers who have a Hayward Star-Clear Plus cartridge filter (C900, C1200 or the compatible separation tank configuration) and need a reliable replacement for a worn or missing locking knob. It’s especially useful if you want a simple, low-cost repair that restores proper lid sealing without replacing the entire filter head.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this knob compatible with Hayward C900 and C1200 filters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This locking knob is made for Hayward Star-Clear Plus C900 and C1200 cartridge filters and compatible separation tank configurations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the replacement knob?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required; the knob typically threads on and hand-tightens. Clean the threads if needed before installing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":56799486181716,"sku":"B004UHF9XW","price":74.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hayward-locking-knob-filter-closeup.jpg?v=1786733497"},{"product_id":"pentair-intellichlor-fuse-holder-kit-521248z-oem-replacement-for-power-center-direct-fit-restoration","title":"Pentair IntelliChlor Fuse Holder Kit 521248Z — OEM replacement for power center, direct-fit restoration","description":"\u003cp\u003e\u003cstrong\u003eReplacement fuse holder kit for Pentair IntelliChlor power centers provides a direct-fit fix to restore safe fuse mounting and reliable circuit protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Pentair IntelliChlor salt chlorinator shows a blown or missing fuse or a cracked holder, this genuine Pentair 521248Z fuse holder kit gives you the parts to get the power center back to working order. Manufactured in the United States, the kit is a compact, lightweight component designed specifically for outdoor pool and spa equipment. Its small footprint and precise dimensions make it a straightforward swap for compatible IntelliChlor models, avoiding lengthy service downtime.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this fuse holder kit restore my IntelliChlor unit?\u003c\/h3\u003e\n\u003cp\u003eThe kit replaces the mechanical housing that secures the fuse and ensures proper electrical contact inside the power center. Installing the new holder corrects loose or damaged connections that can cause intermittent operation or a non-functional unit. Because it’s an OEM Pentair part, the fit and electrical characteristics match factory specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for Pentair IntelliChlor power center fuse mounting\u003c\/li\u003e\n  \u003cli\u003ePrecise dimensions for a snug, reliable fit\u003c\/li\u003e\n  \u003cli\u003eRe-establishes proper fuse contact and circuit continuity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical and shipping details I should know?\u003c\/h3\u003e\n\u003cp\u003eThis fuse holder kit is very small and lightweight, making it easy to store and inexpensive to ship. The product ships with the exact dimensions and weight listed by the manufacturer, so it’s suitable for online parts ordering or service technicians carrying spare components. It’s intended for outdoor living equipment, so it aligns with pool and spa installation environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade in the United States for consistent quality control\u003c\/li\u003e\n  \u003cli\u003ePackage weight approximately 0.022 pounds for low shipping cost\u003c\/li\u003e\n  \u003cli\u003ePackage size about 0.254 cm (H) x 20.32 cm (L) x 14.223 cm (W)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for someone familiar with pool equipment service or electrical maintenance. You’ll need basic hand tools—screwdriver, possibly small pliers—and to disconnect power before working on the power center. If you’re unsure about electrical safety, consult a licensed technician.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic hand tools normally sufficient for replacement\u003c\/li\u003e\n  \u003cli\u003ePower must be fully disconnected before starting work\u003c\/li\u003e\n  \u003cli\u003eOEM fit reduces need for modifications or adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Pool and spa owners, maintenance professionals, and parts distributors who need an exact OEM fuse holder replacement for Pentair IntelliChlor power centers. This kit suits anyone looking to quickly restore reliable fuse mounting and safe electrical connections in their salt chlorinator system without replacing the entire power center. If you value original-equipment compatibility and U.S.-made components, this Pentair 521248Z kit is a practical parts solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this fuse holder kit compatible with all IntelliChlor models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This Pentair 521248Z kit fits IntelliChlor power centers that use the same factory fuse holder; check your unit model or part number to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the fuse holder myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if you’re comfortable with basic electrical safety and hand tools; otherwise hire a qualified technician to disconnect power and complete the replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":56799489229140,"sku":"B008HLR3H2","price":75.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/pentair-fuse-holder-kit-front-packaging.jpg?v=1786733549"},{"product_id":"dumingqin-replacement-horizontal-bar-for-intex-ultra-frame-pools-part-12428-2017-2018-dark-gray-36-x-2-15-16","title":"Dumingqin Replacement Horizontal Bar for Intex Ultra Frame Pools – Part #12428 (2017–2018 Dark‑Gray, 36\" x 2-15\/16\")","description":"\u003cp\u003e\u003cstrong\u003eDumingqin's horizontal bar part #12428 is a direct-fit replacement horizontal support tube designed for 2017–2018 Intex Ultra Frame pools that use plastic T-joints.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf one of your pool’s horizontal rails is bent, corroded, or missing, this aftermarket tube restores frame integrity so your Ultra Frame pool can stand securely. The piece reproduces the original length and diameter specifications used on the 2017 and 2018 model years and is intended for use with the dark-gray frame variants that utilize plastic T-connectors.\u003c\/p\u003e\n\n\u003ch3\u003eWhich pool models will this horizontal bar fit?\u003c\/h3\u003e\n\u003cp\u003eThis tube fits a range of Intex Ultra Frame sizes produced in 2017 and 2018 that share the same plastic T-joint connection system. Confirm your pool is a dark-gray frame from those years and that the damaged bar uses a plastic T-connector before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible sizes include 15'x48\", 16'x48\", 18'x48\", 18'x52\".\u003c\/li\u003e\n  \u003cli\u003eAlso fits 20'x48\", 20'x52\", 22'x52\", 24'x52\" and 26'x52\" models.\u003c\/li\u003e\n  \u003cli\u003eLength (long): 36\"; outer diameter: 2-15\/16\"—matches original part geometry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm I need part #12428 and not another tube?\u003c\/h3\u003e\n\u003cp\u003eInspect the joint type and frame color: part #12428 is made for the 2017–2018 dark-gray Ultra Frame pools that use plastic T-joints, not metal connector systems. Measure the failed tube and compare the dimensions to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify the frame color is dark gray (2017–2018 style).\u003c\/li\u003e\n  \u003cli\u003eCheck that the joint connecting to the tube is a plastic T-joint rather than a metal receiver.\u003c\/li\u003e\n  \u003cli\u003eMeasure the existing tube: 36\" length, 2-15\/16\" diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward when you have the matching pool model: slide the replacement tube into the plastic T-joints and secure the frame per the pool’s assembly instructions. Routine inspection of all frame tubes for dents or wear will help prolong the pool’s usable life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAssembly uses the same snap\/slot method as the original Intex tubes.\u003c\/li\u003e\n  \u003cli\u003eLight tapping and alignment may be needed to seat the tube fully into T-joints.\u003c\/li\u003e\n  \u003cli\u003eOccasional cleaning and visual checks prevent unexpected failures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this new design different from older replacement tubes?\u003c\/h3\u003e\n\u003cp\u003eThe SKU reflects a refreshed design intended to match Intex’s 2017–2018 specifications more precisely. The updated dimensions and fitment focus on compatibility with plastic T-connectors found on those model years, minimizing fit issues during swap-outs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMarked as New Design, labeled part #12428 for clarity.\u003c\/li\u003e\n  \u003cli\u003eManufactured to match original length and diameter tolerances.\u003c\/li\u003e\n  \u003cli\u003eEngineered for direct replacement without modifying T-joints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement horizontal bar is aimed at owners of Intex Ultra Frame pools from 2017–2018 who need a direct-fit tube for dark-gray frames with plastic T-joints. If you want a part that mirrors the factory dimensions (36\" long, 2-15\/16\" diameter) and fits the listed pool sizes, this piece provides a practical repair option to restore frame stability without replacing the whole structure.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this tube fit metal T-joints?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This part is made for 2017–2018 dark-gray Ultra Frame pools that use plastic T-joints only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the exact dimensions of part #12428?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tube measures 36\" long with an outer diameter of 2-15\/16\".\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dumingqin","offers":[{"title":"Default Title","offer_id":56799489327444,"sku":"B0D91PLQ8D","price":105.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/dumingqin-horizontal-bar-front-view.jpg?v=1786733552"}],"url":"https:\/\/gardenluxe.co.uk\/collections\/pool-spa-replacement-parts.oembed","provider":"Gardenluxe Uk","version":"1.0","type":"link"}