{"title":"YAMATIC","description":"\u003cp\u003eBrowse our full YAMATIC range. Every order ships free across the UK, with free 30-day returns as standard.\u003c\/p\u003e","products":[{"product_id":"yamatic-flexible-pressure-washer-hose-50-ft-m22-14mm-1-4-inch-id-reinforced-low-memory","title":"YAMATIC Flexible Pressure Washer Hose 50 ft M22-14mm 1\/4 inch ID, Reinforced Low-Memory","description":"\u003cstrong\u003eYAMATIC’s 50-foot flexible pressure washer hose is a lightweight, low-memory replacement hose with M22-14mm fittings, reinforced joints, and a quick-connect adapter kit for most gas and electric washers.\u003c\/strong\u003e\n\n\u003cp\u003eThis hose is built to replace stiff, hard-to-handle factory hoses with a 1\/4\" inner diameter that lays flat while in use and recoils easily for storage. At 50 feet long, it gives you extended reach around vehicles, decks, and landscaping without moving the pressure washer itself. The construction combines a reinforced core with a non-marking outer jacket and heavy-duty bend restrictors so the hose resists abrasion, joint blowouts, and kinking under normal residential cleaning tasks.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hose fit my pressure washer?\u003c\/h3\u003e\n\u003cp\u003eDesigned for machines that use the common M22-14mm connection, this hose is compatible with many popular brands and models. It does not fit units that require a 15mm inner-pin coupling, so double-check your thread size before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible brands: Ryobi, Greenworks, Troy-Bilt, Craftsman, Simpson, Honda, Generac, Briggs \u0026amp; Stratton, Westinghouse, Champion, Husqvarna, DeWalt.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Sun Joe, Karcher, AR Blue with 15mm inner pin.\u003c\/li\u003e\n  \u003cli\u003eIncludes M22-14mm fittings to match standard pumps and guns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the reinforced joint design improve durability?\u003c\/h3\u003e\n\u003cp\u003eYAMATIC reinforced the hose ends—the most stressed areas—by integrating solid brass fittings and heavy-duty bend restrictors. Those upgrades reduce the chance of connection failure when pulling or dragging the hose during use and help prevent blowouts at the fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass fittings for corrosion resistance and long-term reliability.\u003c\/li\u003e\n  \u003cli\u003eBend restrictors prevent sharp elbowing and premature wear at the joint.\u003c\/li\u003e\n  \u003cli\u003eRated for cold-water use up to 140°F; avoid direct contact with hot mufflers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance specs and safety features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe hose pairs an 8700 PSI reinforced core (3200 PSI working pressure) with a non-marking outer jacket engineered to resist scuffs and tears when dragged across rough surfaces. It’s made to handle the demands of residential cleaning while minimizing surface damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3200 PSI working pressure with 8700 PSI burst pressure core.\u003c\/li\u003e\n  \u003cli\u003eNon-marking jacket to protect driveways and patios from scuffs.\u003c\/li\u003e\n  \u003cli\u003eLow-memory material lays flat and recoils easily for quick storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in the quick-connect kit and how does it help?\u003c\/h3\u003e\n\u003cp\u003eThe package contains brass quick-connect adapters and a male-to-male coupler so you can convert fixed-thread connections to snap-on fittings or join hoses together for greater reach. These accessories make setup faster and let you expand or adapt your system without specialized tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM22-14mm to 3\/8\" brass quick-connect adapters for pump and gun conversions.\u003c\/li\u003e\n  \u003cli\u003eMale-to-male brass coupler to link hoses for extended reach.\u003c\/li\u003e\n  \u003cli\u003eAll-metal hardware for secure, leak-resistant connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners, detailers, landscapers, and DIYers who want an easier-to-handle pressure washer hose that won’t mark concrete and can withstand typical residential cleaning tasks. If you need a lightweight, tangle-resistant 50-foot hose with robust fittings and quick-connect flexibility for most M22-14mm-equipped machines, this YAMATIC hose is a practical upgrade. Verify your machine’s thread size before purchasing to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with my Sun Joe or Karcher washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This hose uses M22-14mm fittings and will not fit Sun Joe or Karcher models with a 15mm inner pin.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the working pressure and temperature limit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Working pressure is 3200 PSI with a core burst rating of 8700 PSI; rated for cold water up to 140°F.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56798655316308,"sku":"B0BHQ8W2K8","price":91.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging.jpg?v=1786726371"},{"product_id":"yamatic-pressure-washer-hose-50-ft-1-4-with-m22-14mm-female-fittings-3200-psi-brass-ends","title":"YAMATIC Pressure Washer Hose 50 ft 1\/4\" with M22-14mm Female Fittings — 3200 PSI, Brass Ends","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC 50-foot pressure washer hose is a 1\/4\" replacement line with pre-installed M22-14mm female brass fittings rated for 3200 PSI working pressure.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty replacement hose restores reach and reliability to compatible electric and gas pressure washers. It ships as a single 50FT hose with matched M22-14mm female end fittings already attached, designed to replace worn factory hoses and extend cleaning range for cars, decks, driveways, siding and other outdoor surfaces. The hose body is built to resist kinks and coil memory so water flows freely when the hose is fully uncoiled and placed under pressure.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hose connect to my pressure washer and gun?\u003c\/h3\u003e\n\n\u003cp\u003eYes if your machine and spray gun use M22-14mm male threaded connections. Both ends of this hose are fitted with M22-14mm female brass couplers to ensure a proper threaded pairing without needing additional adapters.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePre-installed M22-14mm female fittings on both ends for direct threaded connection.\u003c\/li\u003e\n  \u003cli\u003eCompatible with select Ryobi, Troy-Bilt, Greenworks, Craftsman, Briggs \u0026amp; Stratton, Honda, and Simpson models that use M22-14mm male outlets.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with M22-15mm, 3\/8\" quick-connect couplers, garden hose threads, or proprietary fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the hose under pressure?\u003c\/h3\u003e\n\n\u003cp\u003eThis hose is engineered for demanding residential use, with a working pressure rating of 3200 PSI and a burst pressure rated far higher to provide a safety margin during operation. The brass fittings resist corrosion and the polyvinyl hose body holds up to regular outdoor cleaning tasks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e3200 PSI working pressure suitable for most consumer pressure-washing jobs.\u003c\/li\u003e\n  \u003cli\u003eHigh burst-pressure rating to reduce risk of sudden failure under stress.\u003c\/li\u003e\n  \u003cli\u003eBrass M22-14mm fittings for a secure, leak-resistant connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this hose include accessories or adapters?\u003c\/h3\u003e\n\n\u003cp\u003eThe product is sold as the hose only; no spray gun, wand, quick-connect plug, or separate coupler is included. That keeps the package simple and focused for users who only need a direct replacement line or an extra length of hose.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePackage contains one 50FT x 1\/4\" pre-fitted pressure washer hose only.\u003c\/li\u003e\n  \u003cli\u003eNo adapter kits, spray guns, wands, 3\/8\" quick-connect plugs, or couplers included.\u003c\/li\u003e\n  \u003cli\u003eAdapters may be required if your machine uses a different fitting standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to handle and store this hose?\u003c\/h3\u003e\n\n\u003cp\u003eThe hose uses a polyvinyl construction selected to minimize coil memory and reduce kinking, which helps maintain steady water flow when in use. For best performance, uncoil the hose fully before running water and avoid tight bends during operation or storage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOEM-upgraded polyvinyl body improves flexibility and reduces twisting.\u003c\/li\u003e\n  \u003cli\u003eDesigned for straightforward handling around vehicles and outdoor surfaces.\u003c\/li\u003e\n  \u003cli\u003eStore loosely coiled to preserve hose shape and prevent permanent kinks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Homeowners and DIYers who need a straightforward, reliable replacement hose for pressure washers that accept M22-14mm male fittings will find this YAMATIC hose useful. It’s best for users who want an extended 50-foot reach, solid working pressure for common cleaning tasks, and a hassle-free threaded connection. If your washer uses quick-connect couplers, M22-15mm threads, or a proprietary inlet, check your machine’s fitting specifications or obtain the proper adapter before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this hose work with quick-connect fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This hose has M22-14mm female threaded ends and does not include quick-connect adapters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure rating does the hose have?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hose is rated for 3200 PSI working pressure, suitable for most residential cleaning tasks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56799615123796,"sku":"B07HLPGWL7","price":72.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-hose-coil.jpg?v=1786735347"},{"product_id":"yamatic-3-8-pressure-washer-hose-100-ft-non-marking-gray-steel-braided-with-360-swivel-quick-connect","title":"YAMATIC 3\/8\" Pressure Washer Hose 100 ft — Non-Marking Gray, Steel-Braided with 360° Swivel Quick-Connect","description":"\u003cp\u003e\u003cstrong\u003eYAMATIC's 3\/8\" non-marking pressure washer hose is a 100-foot, steel-braided, hot\/cold-rated replacement line with 360° swivel quick-connect ends for smoother, tangle-free washing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty power washer hose is built for contractors and homeowners who need a durable, flexible line for exterior cleaning tasks. Its true 3\/8\" inner diameter improves water flow compared with smaller hoses, while the steel wire braid and wear-resistant gray jacket resist abrasion and repeated dragging. The included M22 14mm adapter fittings expand compatibility so you can swap this hose onto many popular pressure washer brands without hunting for extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 360° swivel quick connect reduce hose tangles?\u003c\/h3\u003e\n\u003cp\u003eThe swivel ends rotate independently of the hose body so the line turns with your movement instead of kinking. That means fewer stops to untangle, smoother sweeping motions, and less strain on the connections during long cleaning sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwivel quick-connect ends for unrestricted rotation\u003c\/li\u003e\n  \u003cli\u003eMinimizes hose twist when moving around cars or corners\u003c\/li\u003e\n  \u003cli\u003eReduces accidental disconnection and wear at fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this hose suitable for hot-water pressure washers?\u003c\/h3\u003e\n\u003cp\u003eYes — the YAMATIC hose is rated for a wide temperature range, so it can handle hot-water washdowns and remain flexible in colder conditions. It’s designed for typical heavy-duty cleaning without losing integrity under heat or cold exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature range: 15°F to 250°F for hot or cold operation\u003c\/li\u003e\n  \u003cli\u003eMaintains flexibility in winter and resilience in hot applications\u003c\/li\u003e\n  \u003cli\u003eAppropriate for grease, grime, and routine exterior cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pressure and flow specs should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe hose is engineered for demanding outdoor use: a commercial steel wire braid core supports high working pressure and a generous burst threshold for safety. The true 3\/8\" inner diameter supports fuller water flow, making it a practical upgrade for compatible high-flow systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 4200 PSI for regular cleaning work\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 13,000 PSI for added safety margin\u003c\/li\u003e\n  \u003cli\u003eTrue 3\/8\" inner diameter for improved water delivery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my pressure washer model?\u003c\/h3\u003e\n\u003cp\u003eThe included adapter fittings broaden fitment to many common machines, but it’s not intended for garden-hose faucets. Check your unit’s quick-connect size and M22 requirements before installing to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes M22 14mm female-to-3\/8\" adapters for wider compatibility\u003c\/li\u003e\n  \u003cli\u003eWorks with brands like Simpson, Generac, Honda, DeWalt, Troy-Bilt, Rigid, Champion and more\u003c\/li\u003e\n  \u003cli\u003eNot designed to attach to standard garden hose spigots\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: If you need a long, robust replacement or upgrade hose for regular exterior cleaning — from detailing vehicles and washing siding to driveways and equipment — the YAMATIC 3\/8\" non-marking 100 ft pressure washer hose is a practical choice. It suits contractors who demand durability, DIYers who want fewer tangles and better flow, and anyone using a compatible high-flow pressure washer who needs dependable hot or cold performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose handle hot-water pressure washers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s rated from 15°F to 250°F, suitable for most hot- and cold-water washdown tasks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include fittings for other brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. M22 14mm female-to-3\/8\" adapters are included for broader compatibility with many pressure washers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56800304038228,"sku":"B09NBQ8RK7","price":261.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-view-hose-coiled.jpg?v=1786737736"},{"product_id":"yamatic-5000-psi-pressure-washer-hose-3-8-x-100-ft-steel-braided-360-stainless-swivel","title":"YAMATIC 5000 PSI Pressure Washer Hose 3\/8\" x 100 ft — Steel-Braided, 360° Stainless Swivel","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC 5000 PSI 3\/8\" Pressure Washer Hose is a 100-foot, steel-braided, rubber-covered hose built for heavy-duty hot and cold water cleaning with a 360° stainless steel swivel quick-connect socket.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for contractors, fleet maintenance, and serious DIYers, this 100-foot hose combines a high working pressure rating with rugged outer protection to reach large surfaces without frequent coupling changes. The 3\/8\" diameter and stainless swivel quick connect reduce kinks and twisting while the steel-braided core provides flexibility and abrasion resistance. Use it with compatible pressure washers and fittings — adapters and washers are not included.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 5000 PSI rating affect everyday use?\u003c\/h3\u003e\n\u003cp\u003eThe 5000 PSI working pressure rating means the hose is intended for continuous, high-pressure applications where durable flow and safety margins matter. It also features a 15000 PSI burst rating that represents overload tolerance, not normal operating pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for continuous use up to 5000 PSI with a 3:1 burst-to-working safety ratio.\u003c\/li\u003e\n  \u003cli\u003e15000 PSI burst pressure indicates robust construction under extreme stress.\u003c\/li\u003e\n  \u003cli\u003eSuitable for heavy cleaning tasks when matched with an appropriate pressure washer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this hose with hot water or in winter?\u003c\/h3\u003e\n\u003cp\u003eThe YAMATIC hose supports a broad temperature range suitable for many commercial cleaning jobs. Always confirm your pressure washer and fittings are rated for the same temperature range before connecting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperational temperature range: 35°F to 250°F for hot and cold water use.\u003c\/li\u003e\n  \u003cli\u003eVerify washer and connector compatibility for hot-water applications.\u003c\/li\u003e\n  \u003cli\u003eAvoid exposing fittings or seals to temperatures beyond their ratings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the swivel quick-connect reduce hose twist and improve handling?\u003c\/h3\u003e\n\u003cp\u003eThe built-in 304 stainless steel 360° swivel quick-connect socket rotates with movement to reduce torque and hose twist during cleaning. This makes long runs and frequent movement easier to manage on job sites.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless swivel QC socket provides full rotation to help prevent kinking.\u003c\/li\u003e\n  \u003cli\u003eSwivel reduces operator fatigue by allowing smoother hose movement.\u003c\/li\u003e\n  \u003cli\u003eNote: hose-only product — adapters and direct garden-hose connections are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction details make this hose durable on the job?\u003c\/h3\u003e\n\u003cp\u003eThe hose combines a steel-braided inner reinforcement with a high-strength rubber outer cover to resist abrasion and maintain flexibility. That construction helps the hose stand up to dragging across surfaces and frequent use in commercial settings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel-braided core for kinking resistance and structural strength.\u003c\/li\u003e\n  \u003cli\u003eBlack rubber outer cover resists wear when routed over rough surfaces.\u003c\/li\u003e\n  \u003cli\u003e3\/8\" internal diameter balances flow and maneuverability for long runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC 5000 PSI 3\/8\" Pressure Washer Hose, 100 FT, is aimed at professional cleaners, agricultural and fleet maintenance crews, and shop owners who need extended reach and robust construction. It's also suitable for homeowners with heavy-duty cleaning needs who own compatible pressure-washer systems. Before purchasing, confirm your machine's fittings and temperature limits match the hose specifications, and plan to use proper adapters if your setup requires them.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with garden hoses or faucets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This is a pressure-washer hose only. Adapters are not included and a direct garden-hose or faucet connection is not supported.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the hose with hot water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hose supports 35°F–250°F for hot and cold water, but verify your washer and fittings are rated for hot-water use first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56801515667796,"sku":"B0C1WSM834","price":278.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-hose.jpg?v=1786743459"},{"product_id":"yamatic-pressure-washer-hose-100-ft-4000-psi-steel-wire-braided-hot-water-rated","title":"YAMATIC Pressure Washer Hose 100 ft — 4000 PSI Steel-Wire Braided, Hot Water Rated","description":"\u003cp\u003e\u003cstrong\u003eYAMATIC Pressure Washer Hose 100 FT is a steel-wire braided, abrasion-resistant replacement or extension hose rated for 4000 PSI working pressure and designed for hot or cold pressure-washing up to 212°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need to reach farther from your power washer without compromising strength or heat tolerance, this 100-foot YAMATIC hose delivers a long working range with steel-reinforced construction and quick-connect convenience. Built to resist scuffs and repeated use on rough outdoor surfaces, it fits many common gas pressure washer brands via included adapters and a 3\/8\" quick connect swivel.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable is the hose for outdoor, rough-surface cleaning?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses a steel-wire braided core wrapped in abrasion-resistant rubber to withstand scraping on concrete, stone, and deck materials. Its design reduces wear from frequent repositioning and heavy-duty tasks, and the stated burst capacity provides an extra safety margin during intense use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel-wire braid for tear and tensile resistance\u003c\/li\u003e\n  \u003cli\u003eThick rubber cover resists abrasion and scuffing\u003c\/li\u003e\n  \u003cli\u003eEngineered for high-pressure home and light-commercial cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this connect to my existing pressure washer and accessories?\u003c\/h3\u003e\n\u003cp\u003eYAMATIC provides a 3\/8\" quick-connect fitting plus two M22-14mm adapters to suit many common gas-powered units and accessories. The package is intended as an extension or replacement for popular brands that use these connections, though it is not compatible with standard garden hoses or faucet threads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 3\/8\" quick connect and two M22-14mm adapters\u003c\/li\u003e\n  \u003cli\u003eCompatible with many Honda, Simpson, DeWalt, Rigid, and similar gas units\u003c\/li\u003e\n  \u003cli\u003eNot designed for garden hose or faucet fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the swivel connection and length help during use?\u003c\/h3\u003e\n\u003cp\u003eThe rotating 3\/8\" quick-connect swivel reduces twisting and kinks as you move the wand around vehicles, patios, or fences, making repositioning smoother. The 100-foot length lets you keep the washer stationary while reaching distant sections of siding, driveways, or tall equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e360° swivel reduces hose twisting and stress points\u003c\/li\u003e\n  \u003cli\u003e100 ft working length for extended reach without dragging the machine\u003c\/li\u003e\n  \u003cli\u003eBetter maneuverability around obstacles and vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the hose handle hot water and high-pressure tasks?\u003c\/h3\u003e\n\u003cp\u003eThe inner hose material tolerates hot-water cleaning up to 212°F, enabling use for stubborn grime when your washer supplies heated water. The working pressure rating supports intense cleaning chores while the construction aims to balance flexibility and strength.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for hot and cold water up to 212°F\u003c\/li\u003e\n  \u003cli\u003e4000 PSI working pressure with a high burst-pressure margin\u003c\/li\u003e\n  \u003cli\u003eSuitable for heavy soiling when paired with appropriate equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Homeowners, detailers, and small-property managers who need a long, heat-tolerant pressure-washer hose that pairs with many gas-powered units. Choose this YAMATIC model if you want extended reach, a swivel quick-connect to reduce kinks, and a steel-reinforced hose built to resist abrasion on concrete, decks, and exterior surfaces. Not appropriate for garden hose connections or faucet-only setups.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the YAMATIC hose safe for hot-water pressure washing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The inner rubber tolerates hot water up to 212°F, suitable for heated cleaning when your washer supplies hot water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this hose fit my gas-powered pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Possibly. It includes a 3\/8\" quick connect and two M22-14mm adapters to fit many gas models, but it won’t fit garden hose or faucet threads.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56801631469908,"sku":"B0C39X7WKG","price":200.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-pressure-hose-front.jpg?v=1786745419"},{"product_id":"yamatic-3-8-pressure-washer-hose-100-ft-4000-psi-360-brass-swivel-steel-braided","title":"YAMATIC 3\/8\" Pressure Washer Hose 100 ft — 4000 PSI, 360° Brass Swivel, Steel-Braided","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC 3\/8\" Pressure Washer Hose is a 100-foot, 4000 PSI-rated replacement hose with a 360° swivel socket designed to prevent kinks and extend reach for hot or cold water cleaning.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty hose swaps into most 3\/8\" quick connect pressure washer setups and gives you a longer working radius without repeatedly moving the machine. Built with a steel-wire braided core and a wear-resistant rubber cover, it tolerates rigorous use and supports temperatures from 15°F to 212°F. The hose fits popular brands and models that use a 3\/8\" quick connect, making it a practical upgrade for homeowners and professionals who need smoother handling and greater coverage.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 360° swivel socket improve handling?\u003c\/h3\u003e\n\u003cp\u003eThe integrated 360° brass swivel socket turns freely so the hose follows the spray gun instead of twisting. This reduces torque at the connection and prevents curling or kinking while you move around vehicles, corners, and furniture. The swivel also keeps the hose aligned when you retract or reposition the gun.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass swivel socket for smooth rotation\u003c\/li\u003e\n  \u003cli\u003eMinimizes hose twisting and user fatigue\u003c\/li\u003e\n  \u003cli\u003eHelps maintain consistent water flow during turns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this hose compatible with my pressure washer brand?\u003c\/h3\u003e\n\u003cp\u003eThe hose is built to 3\/8\" quick-connect dimensions and matches many common consumer and contractor pressure washers. It is intended as an upgrade or replacement for systems from Simpson, DeWalt, Generac, Ridgid, MTM, Champion, Powerstroke and other units using 3\/8\" QC fittings. Always confirm your machine’s connection spec before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" steel plug and brass swivel socket for standard QC systems\u003c\/li\u003e\n  \u003cli\u003eWorks with most manufacturers that use 3\/8\" quick connects\u003c\/li\u003e\n  \u003cli\u003eCheck your washer’s manual or nozzle assembly for fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and performance limits?\u003c\/h3\u003e\n\u003cp\u003eEngineered for repeated cleaning cycles, the hose features a high-tensile steel-wire braid core rated at 4000 PSI working pressure and a 12000 PSI burst rating for safety margin. The outer rubber jacket resists abrasion from dragging across driveways and equipment, while the braided reinforcement keeps it from stretching under pressure. It handles both hot and cold water for a wide range of cleaning tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4000 PSI working pressure; 12000 PSI burst pressure\u003c\/li\u003e\n  \u003cli\u003eHeat-tolerant between 15°F and 212°F\u003c\/li\u003e\n  \u003cli\u003eWear-resistant rubber cover and steel-wire braid core\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow far can this hose reach and what tasks is that best for?\u003c\/h3\u003e\n\u003cp\u003eThe 100-foot length gives an extended working area so you can clean long driveways, large patios, house siding, or outbuildings without frequently moving the pressure washer. Extra length reduces interruptions and helps maintain an efficient workflow on larger jobs. It’s especially useful for one-person operations where moving the machine would be inconvenient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100 ft total length for extended coverage\u003c\/li\u003e\n  \u003cli\u003eReduces how often the washer must be repositioned\u003c\/li\u003e\n  \u003cli\u003eIdeal for properties with long driveways or wide exterior surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC 3\/8\" Pressure Washer Hose is aimed at homeowners, detailers, landscapers, and contractors who need a longer, tougher, and more flexible hose for routine exterior cleaning. If you want a quick-connect replacement that reduces kinks, supports hot-water tasks, and pairs with popular 3\/8\" systems, this hose is a practical choice. Double-check your washer's quick-connect size and operating temperature needs before buying.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this hose fit my 3\/8\" quick-connect pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's made for standard 3\/8\" quick-connect fittings. Verify your machine uses a 3\/8\" QC before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the hose handle hot-water cleaning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—rated for operation from 15°F to 212°F, suitable for hot and cold water cleaning tasks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56801795539284,"sku":"B08XLQMW22","price":238.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-connector.jpg?v=1786748802"},{"product_id":"yamatic-pressure-washer-gun-and-50-ft-rubber-hose-kit-4000-psi-stainless-steel-adjustable-wand","title":"YAMATIC Pressure Washer Gun and 50 FT Rubber Hose Kit — 4000 PSI, Stainless Steel Adjustable Wand","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Pressure Washer Gun and 50 FT Rubber Hose Kit is a 4000 PSI compatible trigger gun system with a 360° swivel inlet, stainless steel adjustable wand, and a flexible rubber hose designed for demanding outdoor cleaning tasks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete power-washer accessory set pairs a heavy-duty trigger gun with a 50-foot rubber high-pressure hose and an adjustable stainless steel extension wand. Built for use with high-pressure gas-powered washers (not garden hoses), the kit is made to resist kinks, survive wide temperature ranges, and accept common quick-connect spray tips and foam attachments. It’s aimed at homeowners and professionals who need reach, mobility and reliable connections for cars, driveways, decks, and equipment cleaning.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 360° swivel inlet improve maneuvering during long jobs?\u003c\/h3\u003e\n\n\u003cp\u003eThe built-in swivel 3\/8\" quick connector at the hose inlet lets the hose rotate independently of the gun, preventing twists and reducing drag while you work. That smoother movement lowers user fatigue and keeps water flow consistent under pressure.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e360° swivel reduces hose tangling and wear\u003c\/li\u003e\n  \u003cli\u003eQuick-connect inlet for fast assembly and disassembly\u003c\/li\u003e\n  \u003cli\u003eImproves handling when reaching around vehicles or corners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features make the hose suitable for heavy-duty and commercial use?\u003c\/h3\u003e\n\n\u003cp\u003eThe 50-foot rubber hose uses upgraded high-tensile steel wire braid and a reinforced rubber compound to handle up to 4000 PSI while remaining flexible. It also maintains performance from freezing to hot-weather conditions and resists distortion from external forces.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-tensile steel braid for pressure durability\u003c\/li\u003e\n  \u003cli\u003eSmaller bend radius for greater flexibility and easier dragging\u003c\/li\u003e\n  \u003cli\u003eWorks with hot and cold water (0°C to 100°C \/ 35°F to 212°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose the stainless steel adjustable wand and what accessories fit it?\u003c\/h3\u003e\n\n\u003cp\u003eThe adjustable stainless steel extension wand extends reach and changes length with a 3-position adjustment to match the task. Its 1\/4\" universal quick-connect outlet accepts common accessories such as spray nozzles, turbo tips, surface cleaners and foam cannons to expand cleaning capability.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStainless steel lance for corrosion resistance and strength\u003c\/li\u003e\n  \u003cli\u003e3-position length adjustment to reach roofs or undercarriages\u003c\/li\u003e\n  \u003cli\u003eUniversal 1\/4\" quick-connect for nozzles and foam attachments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this gun-and-hose kit compatible with my pressure washer?\u003c\/h3\u003e\n\n\u003cp\u003eThe YAMATIC kit is built to pair with most gas-powered high-pressure washers up to 4000 PSI, including many common brands. It is not suitable for standard garden hoses or low-pressure systems; check your machine’s outlet and maximum PSI to confirm compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with many gas power washer models and brands\u003c\/li\u003e\n  \u003cli\u003eNot for use with garden hoses or low-pressure lines\u003c\/li\u003e\n  \u003cli\u003eDesigned for quick-connect nozzle systems and commercial tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This kit is intended for homeowners, auto detailers, and light commercial users who need a longer, more durable hose and a flexible trigger gun assembly for heavy outdoor cleaning. If you operate a high-pressure gas washer and want reduced hose-kinking, longer reach, and the ability to swap spray tips and foam accessories, the YAMATIC Pressure Washer Gun with 50 FT rubber hose and extension wand is a practical upgrade. Note: always verify your washer’s PSI and connector type before purchase and use the kit only with appropriate high-pressure machines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this with a garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit is designed for high-pressure washers and is not compatible with standard garden hoses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What PSI and temperature range does the hose support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hose is rated up to 4000 PSI and works between 35°F and 212°F (0°C to 100°C).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56801823195476,"sku":"B0CZKL5M97","price":179.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-pressure-washer-gun-front-view.jpg?v=1786749835"},{"product_id":"yamatic-3-8-pressure-washer-hose-100-ft-black-4200-psi-working-pressure-360-swivel","title":"YAMATIC 3\/8\" Pressure Washer Hose 100 ft — Black, 4200 PSI Working Pressure, 360° Swivel","description":"\u003cp\u003e\u003cstrong\u003eYAMATIC 3\/8\" Pressure Washer Hose 100 ft is a heavy-duty, true 3\/8\" inner-diameter hose with 360° swivel quick-connect ends, rated for 4200 PSI working pressure and hot-water use up to 212°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 100-foot replacement hose is built for homeowners and pros who need longer reach without sacrificing flow or durability. With a steel wire braided core, wear-resistant rubber jacket, and full 3\/8\" bore, the hose keeps water delivery strong for larger gas pressure washers. The integrated swivel quick-connect ends reduce tangles and make it easier to move around vehicles, siding, patios, and equipment during long cleaning sessions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the swivel quick-connect reduce hose tangles?\u003c\/h3\u003e\n\u003cp\u003eThe 360° swivel ends let the connector turn independently of the hose so the line rotates with your motion instead of twisting up. That means fewer stops to unkink or reorient the hose while you work, which saves time and frustration on larger jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e360° swivel on both ends for free rotation\u003c\/li\u003e\n  \u003cli\u003eQuick-connect fittings for fast attachment and detachment\u003c\/li\u003e\n  \u003cli\u003eLess hose drag and fewer kinks during extended use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this handle hot water and high pressures?\u003c\/h3\u003e\n\u003cp\u003eYes — the YAMATIC hose is rated for continuous working pressure up to 4200 PSI and burst pressure to 13,000 PSI, with temperature tolerance from 15°F to 212°F. The steel wire braid and robust rubber cover are designed to withstand repeated high-pressure cycles and hot-water cleaning tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4200 PSI working pressure rating\u003c\/li\u003e\n  \u003cli\u003e13,000 PSI burst pressure for safety margin\u003c\/li\u003e\n  \u003cli\u003eTemperature range 15°F to 212°F for seasonal use and hot-water cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this truly a 3\/8\" hose and what washers will it fit?\u003c\/h3\u003e\n\u003cp\u003eThis product has a true 3\/8\" inner diameter (not just the quick-connect size), so it sustains fuller water flow than smaller-bore hoses. It’s compatible with most pressure washers that use 3\/8\" quick-connect fittings — many popular brands work with it, though adapters may be required for M22 systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue 3\/8\" inner diameter for better flow\u003c\/li\u003e\n  \u003cli\u003eWorks with many Simpson, Generac, Honda, DeWalt, Troy-Bilt, Rigid models\u003c\/li\u003e\n  \u003cli\u003eM22 systems require adapters (available from YAMATIC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the hose for outdoor work and storage?\u003c\/h3\u003e\n\u003cp\u003eThe braided steel core and abrasion-resistant rubber jacket make the hose rugged enough for frequent outdoor tasks, dragging across driveways, and storage on reels. It resists wear from rough surfaces and remains flexible in cooler weather, giving reliable performance through multiple seasons.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel wire braid for strength under tension and pressure\u003c\/li\u003e\n  \u003cli\u003eWear-resistant rubber jacket protects from abrasion\u003c\/li\u003e\n  \u003cli\u003eFlexibility down to 15°F for colder conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: homeowners, car detailers, contractors, and rental operators who need extended reach and steady flow from their pressure washer. Choose this hose when you want a longer true 3\/8\" line with swivel quick-connect convenience, heavy-duty construction, hot-water capability, and broad compatibility with common 3\/8\" quick-connect pressure washers. If you use an M22 fitting, plan to add the appropriate adapter available through YAMATIC to ensure a correct connection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hose fit my 3\/8\" quick-connect pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits most 3\/8\" quick-connect systems; M22 units may need an adapter available from YAMATIC.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose handle hot-water cleaning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s rated up to 212°F for hot-water cleaning and stays flexible down to 15°F.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56801839022420,"sku":"B0DZVQ77XG","price":212.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-100ft-hose.jpg?v=1786750680"},{"product_id":"yamatic-foam-cannon-snow-foam-lance-1-4-quick-connect-heavy-duty-brass-stainless-core-adjustable-detergent-knob","title":"YAMATIC Foam Cannon Snow Foam Lance 1\/4\" Quick-Connect — Heavy-Duty Brass \u0026 Stainless Core, Adjustable Detergent Knob","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Heavy Duty Foam Cannon is a professional-grade adjustable snow foam lance that produces dense, clinging foam for safe, efficient car washing with most pressure washers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis foam cannon pairs a stainless-steel foam maker core and an upgraded brass nozzle assembly to deliver thick, consistent suds that help lift dirt and road grime before manual contact. Built for enthusiasts and detailers, the lance connects with a 1\/4\" quick-connect fitting and includes five nozzle tips plus an adjustable detergent knob so you can dial foam thickness and spray pattern to match your cleaning task.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the foam cannon improve car washing results?\u003c\/h3\u003e\n\u003cp\u003eThe YAMATIC cannon wets the vehicle surface with high-foaming detergent that clings to paintwork, softening contaminants so they rinse away more easily. That reduces reliance on aggressive scrubbing and lowers the risk of scratches during washing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless-steel foam maker core produces dense, long-lasting foam.\u003c\/li\u003e\n  \u003cli\u003eAdjustable detergent knob controls foam concentration and flow.\u003c\/li\u003e\n  \u003cli\u003eFive nozzle tips (including 2.5 GPM option) tailor spray pattern and reach.\u003c\/li\u003e\n  \u003cli\u003e1\/4\" quick-connect for fast attachment to compatible pressure washer lances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pressure washer specs are required to use this lance effectively?\u003c\/h3\u003e\n\u003cp\u003eThe lance works best on machines that deliver at least 2.0 GPM and 1,000 PSI, and supports a working range of roughly 70 BAR (about 1,000 PSI) up to 200 BAR (max spec listed). Confirm your washer’s GPM\/PSI match these ranges to achieve optimal foam density and nozzle performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended: ≥2.0 GPM and ≥1,000 PSI for thick foam.\u003c\/li\u003e\n  \u003cli\u003eOperational pressure range: around 70 BAR (1,000 PSI) up to 200 BAR (max compatibility).\u003c\/li\u003e\n  \u003cli\u003eQuick-connect 1\/4\" fitting for common lance systems.\u003c\/li\u003e\n  \u003cli\u003eWorks with typical consumer and light-professional pressure washers meeting specs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich build features make this foam lance durable and reliable?\u003c\/h3\u003e\n\u003cp\u003eYAMATIC upgraded the wet-end with a heavy-duty brass nozzle core and reinforced plastic connector to minimize movement and wear during use. The stainless foam maker core resists corrosion and helps create a rich, creamy foam stream that lasts on the surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass nozzle core for thicker, heavier construction and stable spray.\u003c\/li\u003e\n  \u003cli\u003eStainless-steel foam maker core resists rust and boosts foam consistency.\u003c\/li\u003e\n  \u003cli\u003eTight plastic fittings reduce shake and prolong seal life.\u003c\/li\u003e\n  \u003cli\u003eReplaceable nozzle tips adapt to various cleaning demands and flow rates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use and maintain the snow foam lance safely?\u003c\/h3\u003e\n\u003cp\u003eFill the bottle with your chosen car shampoo diluted per manufacturer guidelines, connect to your lance or trigger gun, and adjust the top knob and nozzle for desired foam and spray width. Rinse the reservoir and run clean water through the lance after each session to prevent detergent buildup and extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMix detergent at recommended dilution before filling the bottle.\u003c\/li\u003e\n  \u003cli\u003eClockwise close on top knob for thicker foam; open slightly for lighter mixture.\u003c\/li\u003e\n  \u003cli\u003eAdjust nozzle tip to change spray angle and reach surfaces safely.\u003c\/li\u003e\n  \u003cli\u003eFlush with water after use and store dry to prevent residues and corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The YAMATIC Heavy Duty Foam Cannon is aimed at car enthusiasts, DIY detailers, and light-professional users who want a robust, adjustable snow foam tool for regular vehicle maintenance. Choose this lance if you own a compatible pressure washer (recommended ≥2.0 GPM and ~1,000 PSI), want denser foam than a typical garden sprayer provides, and prefer a heavier-duty metal construction with multiple nozzle options and easy quick-connect compatibility. YAMATIC includes a one-year warranty and accessible customer support for troubleshooting and replacement guidance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits lances with a 1\/4\" quick-connect; recommended washer specs are ≥2.0 GPM and about 1,000 PSI for best foam.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I get the thickest foam?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Close the top detergent knob clockwise, use the lower-flow nozzle tip, and ensure sufficient pressure and correct detergent dilution.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56805305876820,"sku":"B07D7W1JPG","price":53.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-foam-cannon-front-view.jpg?v=1786801537"},{"product_id":"yamatic-pressure-washer-hose-25ft-1-4in-m22-kink-resistant-replacement-3200-psi-with-3-8in-quick-connect","title":"YAMATIC Pressure Washer Hose 25ft 1\/4in M22 — Kink-Resistant Replacement, 3200 PSI with 3\/8in Quick-Connect","description":"\u003cp\u003e\u003cstrong\u003eYAMATIC's 25-foot, 1\/4\" inner-diameter pressure washer hose with M22 fittings is a kink-resistant replacement rated to 3200 PSI for most residential power washers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty replacement hose is built for homeowners and weekend cleaners who need a longer, lighter, and more flexible line for washing cars, decks, patios, and driveways. It swaps onto many common machines that use an M22 thread and accepts a 3\/8\" quick-connect adapter, giving broad compatibility with Ryobi, Troy-Bilt, Greenworks, CRAFTSMAN and similar brands. Materials and fittings are designed to resist rust and pressure wear while keeping the hose manageable during use and storage.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable is this hose for regular outdoor cleaning?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses reinforced new materials and an improved inner tube to withstand frequent use up to 3200 PSI without the memory kinks of cheaper alternatives. Pure copper M22 threads increase connection longevity and help prevent leaks under vibration and pressure spikes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated working pressure up to 3200 PSI for most residential tasks\u003c\/li\u003e\n  \u003cli\u003eReinforced construction resists kinking and abrasion\u003c\/li\u003e\n  \u003cli\u003ePure copper M22 fitting for better wear and rust resistance\u003c\/li\u003e\n  \u003cli\u003eAvoid exposure to surfaces above 140°F\/60°C to protect integrity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hose fit my pressure washer and accessories?\u003c\/h3\u003e\n\u003cp\u003eYAMATIC designed the hose to replace factory lines on many models using an M22 threaded outlet; it also includes compatibility with a 3\/8\" quick-connect adapter for common spray guns and wands. Check your machine’s thread and connector type before buying to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard 1\/4\" inner diameter and M22 thread for broad compatibility\u003c\/li\u003e\n  \u003cli\u003e3\/8\" quick-connect adapter included for many guns and lances\u003c\/li\u003e\n  \u003cli\u003eWorks with brands like Ryobi, Troy-Bilt, Greenworks, CRAFTSMAN, and others\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to handle and store the 25-foot hose?\u003c\/h3\u003e\n\u003cp\u003eThe hose is lighter than traditional rubber lines and engineered to reduce memory kinks, making it easier to pull, coil, and lay out while you work. If it arrives slightly twisted, laying it flat for a short time helps relax the material and reduces tangling during the first uses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLightweight construction for easier maneuvering around vehicles and landscaping\u003c\/li\u003e\n  \u003cli\u003eKink-resistant inner tube for smoother water flow and fewer snags\u003c\/li\u003e\n  \u003cli\u003eSimple to roll and store; tip: uncoil and lay flat after unboxing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or precautions should I follow?\u003c\/h3\u003e\n\u003cp\u003eRoutine care extends hose life: flush after use, avoid sharp edges, and do not expose the hose to engine exhaust or surfaces exceeding 140°F\/60°C. Inspect fittings periodically and tighten if vibration loosens them; the anti-rust design reduces, but doesn’t eliminate, the need for occasional checks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRinse and drain the hose after each use to prevent internal wear\u003c\/li\u003e\n  \u003cli\u003eStore indoors or shaded to avoid prolonged UV and heat exposure\u003c\/li\u003e\n  \u003cli\u003eCheck M22 connection threads and seals occasionally for leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC 25FT 1\/4\" M22 pressure washer hose is aimed at homeowners, detailers, and property caretakers who need a reliable, longer-reach replacement hose that’s lighter than rubber options and compatible with many popular residential power washers. It’s a practical upgrade for anyone seeking improved handling, durable fittings, and a cost-effective alternative to OEM hoses without sacrificing working pressure or connection security.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure does this hose support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hose is rated up to 3200 PSI, suitable for most residential pressure-washing tasks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it fit my pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits machines with an M22 threaded outlet and includes a 3\/8\" quick-connect adapter for common guns.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56805356896596,"sku":"B09LV8D4B5","price":72.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-pressure-washer-hose.jpg?v=1786802377"},{"product_id":"yamatic-pressure-washer-pump-3-4-shaft-horizontal-3400-psi-2-6-gpm-aluminum-body","title":"YAMATIC Pressure Washer Pump 3\/4\" Shaft Horizontal — 3400 PSI 2.6 GPM, Aluminum Body","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC horizontal pressure washer pump is a direct-fit replacement pump with a 3\/4\" shaft that delivers up to 3400 PSI at 2.6 GPM for restoring power washer performance without replacing the entire machine.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your gas pressure washer has lost pressure or started leaking, swapping in a new pump is often the fastest, most cost-effective repair. This YAMATIC pump is built for horizontal-mount engines with a 3\/4\" shaft and is designed to match common small-engine pressure washers (about 6.5–7.0 HP). It’s aluminum-bodied, comes with an adjustable unloader, and arrives with the hardware needed for a quick installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this pump improve my pressure washer’s performance?\u003c\/h3\u003e\n\u003cp\u003eThe pump restores lost pressure and flow, returning cleaning power to walls, driveways, decks, and vehicles. It’s optimized to perform best between 2800–3400 PSI and pairs with engines that can sustain roughly 3400 RPM under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMax rated output: 3400 PSI at 2.6 GPM.\u003c\/li\u003e\n  \u003cli\u003eBest operating band: 2800–3400 PSI for steady cleaning power.\u003c\/li\u003e\n  \u003cli\u003eEngine compatibility: fits most engines ~212cc (6.5–7.0 HP).\u003c\/li\u003e\n  \u003cli\u003eHorizontal mounting with 3\/4\" keyed shaft for direct replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features make this pump durable and low maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe YAMATIC pump uses an anodized die-cast aluminum housing and an upgraded double-seal system to resist corrosion and reduce leakage. Internal components like improved pistons and bearings are finished for longer lifecycle and the crankcase is sealed so you don’t need routine oil changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFully anodized aluminum body for rust protection.\u003c\/li\u003e\n  \u003cli\u003eDouble-seal design to minimize fluid leaks and contamination.\u003c\/li\u003e\n  \u003cli\u003eUpgraded piston and bearing surface treatments for extended life.\u003c\/li\u003e\n  \u003cli\u003eMaintenance-free sealed crankcase—no routine oil changes required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and does it include everything I need?\u003c\/h3\u003e\n\u003cp\u003eDesigned for straightforward swap-outs, the kit includes mounting bolts, a shaft key, a siphon tube with filter, and instructions so most users can install it in 5–10 minutes. The adjustable unloader simplifies matching pressure to your engine and eliminates the need to bleed the system before cold starts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes bolts, shaft key, siphon tube with filter, and instruction booklet.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in easy-start design—no pressure release required to start engine.\u003c\/li\u003e\n  \u003cli\u003eAdjustable unloader to fine-tune pressure for your engine’s output.\u003c\/li\u003e\n  \u003cli\u003eQuick-install expectations: roughly 5–10 minutes for most users.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich machines is this pump compatible with and what measurements matter?\u003c\/h3\u003e\n\u003cp\u003eThis pump is engineered to replace many popular models from Simpson, Karcher, Honda, Generac and others, but it requires a horizontal 3\/4\" shaft—engines with a 7\/8\" shaft will not fit. Verify the diagonal hole-to-hole and shaft\/key dimensions before ordering to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon replacements: selected Simpson, Karcher, Honda, Delta, PowerStroke, Powerboss models.\u003c\/li\u003e\n  \u003cli\u003eMounting dimensions: diagonal screw-hole spacing 3 5\/8\"; hole-to-hole 2 9\/16\".\u003c\/li\u003e\n  \u003cli\u003eShaft key: 3\/16\" width; shaft depth: 2 5\/8\".\u003c\/li\u003e\n  \u003cli\u003eImportant: incompatible with 7\/8\" engine shafts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this pump is for: The YAMATIC 3\/4\" horizontal pump is ideal for DIYers, rental shops, landscapers, and homeowners who want to repair a tired gas pressure washer rather than buy a new unit. Choose this pump if your machine supports up to 3400 PSI at 2.6 GPM, has a horizontal 3\/4\" keyed shaft, and you want a durable, low-maintenance replacement with an adjustable unloader for tuning pressure to your engine’s capability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this pump fit my pressure washer engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check that your engine uses a horizontal 3\/4\" keyed shaft and supports up to 3400 PSI; 7\/8\" shafts are not compatible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to change oil in this pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this model has a sealed, maintenance-free crankcase so routine oil changes are not required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56805471420756,"sku":"B0B518P672","price":177.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-view-pressure-washer-pump.jpg?v=1786804036"},{"product_id":"yamatic-3-8-pressure-washer-hose-100-ft-steel-braided-304-stainless-quick-connects-4200-psi","title":"YAMATIC 3\/8\" Pressure Washer Hose 100 ft — Steel-Braided, 304 Stainless Quick-Connects, 4200 PSI","description":"\u003cp\u003e\u003cstrong\u003eYAMATIC's 100 ft 3\/8\" pressure washer hose is a heavy-duty, steel-braided cleaning line with 304 stainless steel quick-connect fittings rated for hot and cold water up to 250°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 100-foot YAMATIC hose is engineered for long-reach cleaning where durability and high flow matter. With a true 3\/8\" inner diameter, a steel-wire braided core, and non-marking rubber jacket, it balances flexibility and toughness for demanding exterior wash jobs. Integrated 304 stainless swivel quick-connects and M22 adapters broaden compatibility with many popular pressure washer brands while improving rust resistance and handling during long runs.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hose handle hot-water pressure washing?\u003c\/h3\u003e\n\u003cp\u003eYes. The hose is designed for hot-water use up to 250°F while remaining flexible down to 15°F. Materials and construction are selected to tolerate thermal stress common in hotter wash applications without sacrificing performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature range: 15°F to 250°F for broad seasonal use.\u003c\/li\u003e\n  \u003cli\u003eRated working pressure: 4200 PSI; burst rating: 13,000 PSI.\u003c\/li\u003e\n  \u003cli\u003eSteel wire braid helps resist heat-related deformation under pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 3\/8\" inner diameter affect cleaning performance?\u003c\/h3\u003e\n\u003cp\u003eA true 3\/8\" inner bore supports higher flow compared with smaller hoses, which helps maintain cleaning power at longer lengths. This reduces pressure drop and keeps nozzle spray effectiveness consistent across a 100-foot run.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue 3\/8\" ID optimized for higher-flow pressure washer systems.\u003c\/li\u003e\n  \u003cli\u003eMinimizes flow restriction versus smaller-diameter hoses.\u003c\/li\u003e\n  \u003cli\u003eBetter match for machines that require larger bore lines for peak performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the fittings corrosion-resistant and easy to handle?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses integrated 304 stainless steel swivel quick-connects and includes 304 M22 adapters for wider compatibility. The swivel design reduces line twist and improves handling during extended cleaning sessions, while stainless finishes resist rust in wet environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless steel swivel quick-connects for reduced twisting.\u003c\/li\u003e\n  \u003cli\u003eIncludes 304 M22 14mm adapters for compatibility with many brands.\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistance extends hardware life in repeated outdoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction features improve durability for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eA steel wire braided core combined with a non-marking, wear-resistant rubber jacket protects the hose from abrasion, dragging, and harsh conditions. The assembly is built to endure repeated cycles and rough handling commonly encountered on job sites and around properties.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel wire braid provides high tensile strength and puncture resistance.\u003c\/li\u003e\n  \u003cli\u003eGray rubber jacket resists marking and surface wear.\u003c\/li\u003e\n  \u003cli\u003e4200 PSI working pressure rating for heavy-duty cleaning tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This YAMATIC 100 ft 3\/8\" pressure washer hose is suited to professional cleaners, contractors, and homeowners who need long reach without sacrificing flow or durability. It fits users who run higher-flow machines, require hot-water capability, or work in corrosive outdoor environments and want stainless fittings plus robust construction for reliable, long-term performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with my pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your machine accepts 3\/8\" quick-connect fittings or M22 adapters; it matches many major brands but not garden hose faucets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the hose handle hot water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s rated for hot-water use up to 250°F and stays flexible down to 15°F.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56805561598292,"sku":"B0D3PP5S34","price":279.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-100ft-hose_9682c9d6-464a-46b8-8f91-236a3f17c1d4.jpg?v=1786806457"},{"product_id":"yamatic-triplex-pressure-washer-pump-3-4-shaft-2800-3700-psi-2-5-gpm-horizontal-pre-filled-oil","title":"YAMATIC Triplex Pressure Washer Pump 3\/4\" Shaft 2800–3700 PSI 2.5 GPM — Horizontal, Pre-filled Oil","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Triplex 3\/4\" shaft pressure-washer pump is a heavy-duty horizontal replacement pump delivering 2800–3700 PSI at 2.5 GPM for 5–8 HP engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pump is built as a direct, high-durability replacement for many common residential and light-professional pressure-washer models. Designed around a triplex plunger assembly and upgraded components, it offers longer runtime, reduced vibration and straightforward installation with the included mounting hardware and accessories. It ships pre-filled with SAE 15W-40 oil so you can install and test quickly; just remember the recommended oil-change interval for peak life.\u003c\/p\u003e\n\n\u003ch3\u003eWill this pump fit my machine?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on shaft orientation, shaft size and machine output. This pump fits only horizontal 3\/4\" drive shafts and is intended for pressure washers driven by 5–8 HP (160–270 cc) engines producing 2800–3700 PSI at about 2.5 GPM. It is compatible with many aftermarket and OEM platforms when those conditions match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires horizontal 3\/4\" keyed shaft (key width 3\/16\").\u003c\/li\u003e\n  \u003cli\u003eWorks with 5–8 HP (160–270 cc) engines.\u003c\/li\u003e\n  \u003cli\u003ePressure rating: 2800–3700 PSI; flow: ~2.5 GPM.\u003c\/li\u003e\n  \u003cli\u003eKnown compatible models: select Simpson MorFlex, Santoprene, and common brands like Honda, DeWalt, AR, Powerstroke, Blackmax, Husky and others—verify shaft orientation and bolt pattern.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this triplex pump compared to standard pumps?\u003c\/h3\u003e\n\u003cp\u003eThe YAMATIC Triplex design uses three plungers that reduce pulsation and mechanical stress, extending operational life and stabilizing output. Upgrades to the pump head material, forged connecting rod and added seal springs increase resistance to wear and to vibration-related loosening. The manufacturer rates the service life up to 500 hours—several times longer than typical economy pumps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTriplex plunger assembly for smoother flow and reduced vibration.\u003c\/li\u003e\n  \u003cli\u003eUpgraded pump head material and forged connecting rod.\u003c\/li\u003e\n  \u003cli\u003eSeal-spring design to help keep oil seals seated under vibration.\u003c\/li\u003e\n  \u003cli\u003eRated to about 500 operating hours under typical conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how quick is installation?\u003c\/h3\u003e\n\u003cp\u003eThe pump ships with the essential hardware and accessories to make installation straightforward, so you can usually complete the swap in under 10 minutes if mounting points match. Included items eliminate the need to source small parts separately and help you test the unit immediately after mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes pre-filled with SAE 15W-40 engine oil (change after first 50 operating hours).\u003c\/li\u003e\n  \u003cli\u003eIncludes 4 flange bolts, soap hose, five color-coded spray nozzles, and shaft keys.\u003c\/li\u003e\n  \u003cli\u003eMounting hole diagonal: 3 5\/8\"; hole center-to-center: 2 9\/16\"; depth: 2 5\/8\".\u003c\/li\u003e\n  \u003cli\u003eOnly fits horizontal 3\/4\" shaft pressure washer setups—confirm before purchasing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you operate a home or light-commercial pressure washer with a horizontal 3\/4\" shaft and a 5–8 HP engine, and you want a longer-lasting replacement pump that reduces vibration and maintains steady pressure, this YAMATIC triplex pump is made for you. It’s appropriate for users who need a straightforward swap with included hardware and prefer a robust, serviceable unit rather than a low-cost disposable pump. Verify shaft orientation, key size and bolt pattern against your machine before ordering to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump fit vertical shafts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the YAMATIC pump fits only horizontal 3\/4\" keyed shafts. Check shaft orientation before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: When should I change the oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The pump ships with SAE 15W-40; change the oil after the first 50 operating hours and then per normal maintenance intervals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56805669044564,"sku":"B0FFSZXCBD","price":288.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-pump-assembly.jpg?v=1786808688"},{"product_id":"yamatic-pistola-corta-para-hidrolavadora-3-8-qc-4000-psi-acero-inoxidable-360-giratoria","title":"YAMATIC Short Pressure Washer Gun — 4000 PSI Stainless Steel 3\/8\" QC, 360° Swivel, Shockproof Handle","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Short Pressure Washer Gun is a compact, high-durability spray gun with a stainless-steel 3\/8\" quick-connect inlet designed for up to 4000 PSI cleaning tasks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis short gun pairs with high-pressure washers and hoses to deliver controlled, comfortable cleaning for cars, driveways, siding, and more. Built with corrosion-resistant stainless steel components, a 360-degree swivel inlet, and a shockproof handle, it was created to reduce hose tangles and wrist fatigue while improving maneuverability—especially when used with foam cannons or in tight spaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 360-degree swivel inlet improve cleaning?\u003c\/h3\u003e\n\u003cp\u003eThe swivel inlet rotates freely to prevent the high-pressure hose from twisting as you move the wand, which keeps the workflow smooth and reduces hose wear. That means fewer interruptions and safer handling during long jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull 360-degree rotation to stop hose kinks and tangles\u003c\/li\u003e\n  \u003cli\u003eSmoother motion for overhead and angled cleaning\u003c\/li\u003e\n  \u003cli\u003eLess stress on couplers and hose fittings, extending component life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this gun durable enough for frequent, heavy-duty use?\u003c\/h3\u003e\n\u003cp\u003eYes—the gun features stainless-steel inlet parts, a brass quick connector, and internal stainless components for trigger and pole connections. These materials resist corrosion and mechanical wear, making the unit suitable for repeated commercial or residential use when paired with a proper pressure washer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless-steel 3\/8\" inlet and plug for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003e1\/4\" brass quick connector with included Teflon tape to reduce leaks\u003c\/li\u003e\n  \u003cli\u003eCeramic trigger and robust pole connector for reduced vibration and long life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the short, ergonomic design help day-to-day tasks?\u003c\/h3\u003e\n\u003cp\u003eThe short, snub-nose layout and lightweight pull-trigger let you operate one-handed and reach tight areas more easily than full-length wands. The shockproof handle reduces hand fatigue for longer cleaning sessions, and its compact form is ideal with a foam cannon attached.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShort-body style for better control in confined spaces\u003c\/li\u003e\n  \u003cli\u003eShock-absorbing handle to reduce hand strain during extended use\u003c\/li\u003e\n  \u003cli\u003eComfortable pull-trigger for precise pressure modulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories come with the gun and what are its compatibility limits?\u003c\/h3\u003e\n\u003cp\u003eThe YAMATIC gun ships with practical fittings and five spray tips, enabling quick switching between spray patterns and foam-cannon-ready connections. It must be used only with a compatible high-pressure washer and hose—not a garden or standard water hose.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 3\/8\" swivel quick connector and M22-14mm male coupler\u003c\/li\u003e\n  \u003cli\u003eFive nozzle tips for varied spray angles and pressures\u003c\/li\u003e\n  \u003cli\u003eCompatible with many major pressure-washer brands (see manual); not for garden hose use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC Short Pressure Washer Gun suits homeowners, mobile detailers, and maintenance pros who need a compact, reliable gun that reduces hose tangles and improves control in tight areas. If you already own a compatible pressure washer and require a durable stainless-steel inlet, easy foam-cannon setup, and lightweight handling for prolonged tasks, this gun is built to deliver consistent performance and serviceability.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this gun with a regular garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This gun requires a high-pressure washer and high-pressure hose; it is not compatible with standard garden hoses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What maximum pressure is this gun rated for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The YAMATIC short pressure washer gun is rated for use up to 4000 PSI when paired with appropriate equipment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56818308514132,"sku":"B09TDS171C","price":68.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-pistola-frente.jpg?v=1786960114"},{"product_id":"yamatic-manguera-flexible-para-hidrolavadora-50-ft-1-4-m22-14mm-baja-memoria-y-funda-no-marcante","title":"YAMATIC Pressure Washer Hose 50 ft 1\/4\" M22-14mm Female — Reinforced, Quick-Connect, Non-Marking","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Flexible Pressure Washer Hose is a 50-foot, 1\/4\" inner diameter replacement hose with M22-14mm female fittings, a reinforced non-marking jacket, and quick-connect adapters for fast, tangle-free pressure washing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your factory pressure-washer hose kinks, drags, or wears out at the connection points, this YAMATIC hose is built to improve handling and longevity. It combines a low-memory, easy-coiling core with heavy-duty bend restrictors and solid brass fittings, plus a quick-connect kit so you can swap or extend hoses without tools. Rated for cold water use up to 140°F and engineered for residential jobs, it balances flexibility and durability for cars, patios, decks, and outdoor equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose make setup and use easier?\u003c\/h3\u003e\n\u003cp\u003eThe 50-foot low-memory blend keeps the hose flat while you work and recoils neatly when you’re done, reducing time spent untangling. The included M22-14mm to 3\/8\" quick-connect pieces convert your pump and gun to snap-on fittings for fast swaps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50 ft length for extended reach without moving the machine\u003c\/li\u003e\n  \u003cli\u003e1\/4\" inner diameter for steady flow and compatibility\u003c\/li\u003e\n  \u003cli\u003eQuick-connect kit (M22-14mm to 3\/8\" and male coupler) for tool-free changes\u003c\/li\u003e\n  \u003cli\u003eCoils flat to minimize tripping and tangles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my pressure washer and attachments?\u003c\/h3\u003e\n\u003cp\u003eThis hose is designed for standard M22-14mm female connections used by many gas and electric brands. It will not fit models using a 15mm inner pin, so checking your washer's thread size before ordering is important.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Ryobi, Greenworks, Troy-Bilt, Craftsman, Simpson, Honda, Generac, Briggs \u0026amp; Stratton, Westinghouse, Champion, Husqvarna, DeWalt\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Sun Joe, Karcher, or AR Blue with 15mm pin\u003c\/li\u003e\n  \u003cli\u003eIncludes adapters to join to 3\/8\" quick-connect systems and to extend existing hoses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the hose under regular residential use?\u003c\/h3\u003e\n\u003cp\u003eThe hose has a reinforced core with an 8700 PSI burst pressure rating and a non-marking outer jacket engineered to resist abrasion on concrete and brick. Reinforced joint areas with bend restrictors and solid brass fittings reduce common failure points during repeated pulling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3200 PSI working-rated, 8700 PSI burst-rated core for safety margin\u003c\/li\u003e\n  \u003cli\u003eNon-marking outer cover resists scuffs and tears\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty bend restrictors protect hose ends and fittings\u003c\/li\u003e\n  \u003cli\u003eSolid brass fittings for secure, corrosion-resistant connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there temperature or handling precautions I should know?\u003c\/h3\u003e\n\u003cp\u003eThe hose is rated for cold water use up to 140°F; avoid exposing it to hot engine parts or open flames which could damage the jacket. For best longevity, store coiled out of direct sunlight and disconnect when not in use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-water rating up to 140°F; not for steam or continuous hot-water systems\u003c\/li\u003e\n  \u003cli\u003eAvoid contact with mufflers or hot engine surfaces to prevent melting\u003c\/li\u003e\n  \u003cli\u003eStore coiled and away from sharp edges or chemical exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC 50FT Flexible Pressure Washer Hose is aimed at homeowners and DIYers who want a longer, tangle-resistant replacement hose that withstands routine outdoor cleaning. It’s ideal if you need extra reach for vehicles, siding, driveways, and decks, want quick-connect convenience, and prefer a non-marking cover that won’t mar surfaces while you work. Check your washer’s thread size before buying to ensure M22-14mm compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hose fit my pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits pressure washers with standard M22-14mm female connections. It will not fit models with a 15mm inner pin like some Sun Joe or Karcher units.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use hot water with this hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This hose is rated for cold water up to 140°F. Avoid steam, continuous hot-water systems, and contact with hot engine parts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56819123683668,"sku":"B088MF6N3R","price":91.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-frente-enrollada.jpg?v=1786961841"},{"product_id":"yamatic-pistola-corta-alta-presion-5000-psi-m22-14mm-3-8-giratoria-360-compacta-y-durable","title":"YAMATIC 5000 PSI Short Pressure Washer Gun — 3\/8\" Quick-Connect with M22-14mm Inlet, 360° Swivel \u0026 Brass Internals","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC 5000 PSI short pressure washer gun is a compact, heavy-duty spray handle with a 360° swivel inlet, brass internals, and 3\/8\" quick-connect\/M22-14mm fittings for high-pressure cleaning tasks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis short pressure washer gun is built to pair with a high-pressure washer and hose (not a garden hose) for demanding residential or commercial cleaning. Its snub-nose design and lightweight, shockproof grip make it easy to control in tight spaces or when used with a foam cannon. Precision metal fittings and brass components reduce leaks and extend service life under pressures up to 5000 PSI and flows to 12 GPM.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 360-degree swivel help during cleaning?\u003c\/h3\u003e\n\u003cp\u003eThe swivel inlet eliminates hose twisting so you can clean continuously without stopping to untangle lines. It improves reach and maneuverability when moving around vehicles, decks, or building exteriors, letting you change angles without stress on the hose or couplers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull 360° swivel reduces hose kinking and wear\u003c\/li\u003e\n  \u003cli\u003eSmoother motion for overhead and vertical cleaning\u003c\/li\u003e\n  \u003cli\u003eImproves operator comfort and workflow speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this gun durable and leak-resistant?\u003c\/h3\u003e\n\u003cp\u003eYAMATIC uses steel and brass fittings throughout, plus Teflon tape and thread-lock to secure connections. Internal components — including a solid brass trigger assembly, steel pole connector, and ceramic trigger parts — are chosen to resist vibration and wear during extended or high-pressure use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass internals for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eSteel fittings and reinforced connectors for strength\u003c\/li\u003e\n  \u003cli\u003eTeflon tape and locktite applied for leak prevention\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this gun with a foam cannon or for tight spots?\u003c\/h3\u003e\n\u003cp\u003eThe short, snub-nose profile is specifically suited for foam cannon attachments and confined areas where a full-length wand is awkward. The compact form gives precise control for trim work, wheel wells, and window frames while still delivering the power needed for heavy soiling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShort barrel fits foam cannons and tight clearances\u003c\/li\u003e\n  \u003cli\u003eOne-handed operation with low fatigue pull-trigger\u003c\/li\u003e\n  \u003cli\u003eCompatible with many popular washer brands for easy pairing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich machines and jobs is this pressure washer gun compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe gun supports up to 5000 PSI and 12 GPM, making it suitable for both homeowner and professional equipment within that range. It includes a 3\/8\" swivel quick connector and M22-14mm male coupler to match common high-pressure hoses and washers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with SIMPSON, CRAFTSMAN, Ryobi, Troy-Bilt, Champion, Honda, Excell, and similar brands\u003c\/li\u003e\n  \u003cli\u003eIdeal for cars, driveways, roofs, siding, decks, and windows\u003c\/li\u003e\n  \u003cli\u003eNot for use with garden hose or regular water hoses — requires a pressure washer hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC 5000 PSI short pressure washer gun is designed for detail-oriented homeowners, mobile detailers, and trade professionals who need a durable, compact spray handle that resists leaks and reduces hose strain. If you use a pressure washer for regular cleaning, foam applications, or jobs in tight spaces and want a metal-bodied gun with proven fittings and swivel convenience, this unit is a practical upgrade. For support or compatibility questions, YAMATIC offers customer service and additional pressure washer accessories through its Power Center store.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this gun compatible with garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — it must be used with a high-pressure washer and a high-pressure hose, not a garden or regular water hose.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure and flow ratings does it support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Rated up to 5000 PSI and 12 GPM; check your washer specs for compatibility before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56819716325716,"sku":"B07VZB8SZJ","price":68.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-pistola-frontal-detalle.jpg?v=1786963528"},{"product_id":"yamatic-manguera-para-hidrolavadora-3-8-35-ft-4000-psi-y-giro-360-anti-enredos","title":"YAMATIC Pressure Washer Hose 3\/8\" QC – 35 ft, 4000 PSI Heavy‑Duty Brass Swivel","description":"\u003cp\u003e\u003cstrong\u003eA heavy-duty 3\/8\" quick-connect pressure washer hose by YAMATIC that delivers 4000 PSI working pressure, a 360° brass swivel to prevent kinks, and 35 feet of flexible reach for hot or cold water cleaning.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement pressure washer hose is engineered for frequent outdoor cleaning tasks where durability and tangle-free operation matter. Built with a high-tensile steel-wire braid and a wear-resistant rubber cover, it tolerates abrasive routing and dragging while supporting temperatures from 15°F to 212°F. The hose uses a steel quick-connect plug and a brass swivel socket that fit common 3\/8\" QC systems, making it compatible with many popular machines.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the swivel socket stop hose twist and kinks?\u003c\/h3\u003e\n\u003cp\u003eThe brass 360° swivel socket rotates as you move the spray wand so the hose follows instead of binding. That rotation reduces torque transmission from the gun to the hose, preventing the typical twisting that causes kinks and restricted water flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e360° brass swivel socket for smooth rotation\u003c\/li\u003e\n  \u003cli\u003eSteel quick-connect plug for secure, leak-resistant coupling\u003c\/li\u003e\n  \u003cli\u003eLess manual re-routing saves time and reduces hose wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hose handle hot water and high pressure?\u003c\/h3\u003e\n\u003cp\u003eYes — the hose is rated for a 4000 PSI working pressure and a 12000 PSI burst pressure, plus a wide temperature range to handle hot or cold cleaning jobs. The braided steel construction and rubber cover maintain structural integrity under repeated high-pressure cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4000 PSI rated working pressure for heavy-duty cleaning\u003c\/li\u003e\n  \u003cli\u003e12000 PSI burst pressure for safety margin under stress\u003c\/li\u003e\n  \u003cli\u003eWorks from 15°F to 212°F for versatile hot\/cold applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich pressure washer brands and setups will this replace?\u003c\/h3\u003e\n\u003cp\u003eThe 3\/8\" quick-connect fittings match many common pressure washer systems, so this hose is a direct replacement for a variety of consumer and professional units. It fits machines that use 3\/8\" QC connectors and pairs with standard spray guns, lances, and accessories.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible replacement for Simpson, DeWalt, Generac, Rigid\u003c\/li\u003e\n  \u003cli\u003eAlso fits MTM, Champion, Powerstock and other 3\/8\" QC systems\u003c\/li\u003e\n  \u003cli\u003eQuick-connect plug and swivel socket for fast swaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long is 35 feet the right choice for my jobs?\u003c\/h3\u003e\n\u003cp\u003eAt 35 ft, the hose gives ample reach around vehicles, patios and small yards while remaining compact enough to route and store easily. This length minimizes excess hose to drag and reduces the risk of tangles compared with much longer hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e35 ft practical reach for cars, driveways, siding and equipment\u003c\/li\u003e\n  \u003cli\u003eShorter than long-run hoses, so it’s easier to manage and store\u003c\/li\u003e\n  \u003cli\u003eIdeal when the washer is close to the work area\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: the YAMATIC 3\/8\" Pressure Washer Hose is aimed at homeowners and professionals who need a reliable, tangle-resistant replacement hose for routine power-washing. It suits vehicle detailers, property maintenance crews, and DIYers who use popular 3\/8\" quick-connect pressure washers and want a durable hose that handles hot water and sustained high pressure without kinking or premature wear.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with my pressure washer model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your machine uses a 3\/8\" quick-connect system, the YAMATIC hose will fit; it's commonly compatible with Simpson, DeWalt, Generac, Rigid, MTM, Champion and Powerstock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the hose handle hot water and high pressure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s rated for 4000 PSI working pressure, 12000 PSI burst pressure, and temperatures from 15°F to 212°F.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56819804799316,"sku":"B0FQ51KD3G","price":94.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-manguera-hidrolavadora-frontal.jpg?v=1786963714"},{"product_id":"yamatic-pistola-de-alta-presion-4000-psi-con-lanza-extensible-hasta-40-y-5-boquillas","title":"YAMATIC Pressure Washer Gun with Extension Wand — 4000 PSI M22, 2 Lances \u0026 5 Nozzles","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Pressure Washer Gun with extension wand delivers a durable, M22-compatible spray gun system rated to 4000 PSI for tough cleaning jobs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete gun-and-wand kit brings a professional-grade trigger handle, two removable extension lances and five quick-change nozzles to replace worn or flimsy factory parts. Built with reinforced, shock-resistant materials, solid brass fittings and an M22 inlet, the assembly is intended to work with electric and gas pressure washers (not garden hoses). Whether you’re rinsing a driveway, prepping siding, detailing cars or reaching high gutters, the YAMATIC set increases reach, control and accessory compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the YAMATIC gun handle high pressure safely?\u003c\/h3\u003e\n\u003cp\u003eThe trigger handle is engineered to withstand heavy-duty use and includes an internal brass trigger mechanism that resists wear. Reinforced shockproof plastics and a steel pole reduce the chance of bending or breakage under pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated maximum: 4000 PSI for heavy cleaning tasks\u003c\/li\u003e\n  \u003cli\u003eSolid brass internal trigger for long service life\u003c\/li\u003e\n  \u003cli\u003eShockproof housing to absorb impact and vibration\u003c\/li\u003e\n  \u003cli\u003eSteel pole provides structural support for extended reach\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat nozzle and accessory compatibility does it offer?\u003c\/h3\u003e\n\u003cp\u003eThe gun features a universal 1\/4\" quick-connect outlet to accept common pressure-washer accessories like foam cannons, turbo tips and surface cleaners. The kit includes five interchangeable nozzle tips to cover fan, rotary and low-pressure detergent spraying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4\" quick-connect outlet for standard attachments\u003c\/li\u003e\n  \u003cli\u003eM22-14mm male inlet plus extra M22-15mm coupler for wide hose fit\u003c\/li\u003e\n  \u003cli\u003eWorks with foam cannons, turbo nozzles and undercarriage tools\u003c\/li\u003e\n  \u003cli\u003eFive included nozzles for versatile spray patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the extension wand improve reach and maneuverability?\u003c\/h3\u003e\n\u003cp\u003eThis set includes two extension lances that attach quickly to create three usable lengths, extending reach up to 40 inches. The lightweight design and ergonomic pull-trigger reduce fatigue during prolonged use, while the dual-lance configuration offers flexible positioning for angled or overhead work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo removable lances that combine for up to 40\" length\u003c\/li\u003e\n  \u003cli\u003eThree-length adjustment for better access to high or distant spots\u003c\/li\u003e\n  \u003cli\u003eLightweight trigger reduces wrist strain during extended tasks\u003c\/li\u003e\n  \u003cli\u003eDual-lance option for balanced control and targeted spraying\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and fittings ensure durability and leak resistance?\u003c\/h3\u003e\n\u003cp\u003eKey connection points use solid brass fittings and come packaged with Teflon tape and thread locker for a tight, reliable seal. These metal components minimize the risk of leaks and corrosion when compared with lower-cost plastic fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass inlet and internal trigger components\u003c\/li\u003e\n  \u003cli\u003eIncluded Teflon tape and thread locker for secure assembly\u003c\/li\u003e\n  \u003cli\u003eReinforced plastics and steel pole for structural durability\u003c\/li\u003e\n  \u003cli\u003eDesigned for compatibility with major pressure washer brands\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC Pressure Washer Gun with Extension Wand suits homeowners, detailers and small contractors who need a robust, extendable spray tool that upgrades older or damaged factory guns. It’s ideal for users with electric or gas pressure washers that accept M22 fittings and who require added reach, accessory compatibility and a dependable brass-sealed connection. Note: this product is not intended for use with standard garden hoses or household faucet connections.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this gun work with my gas pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it supports electric and gas washers up to 4000 PSI and fits M22-thread hoses with the included coupler.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this with a garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit requires a high-pressure washer hose and will not work with standard garden hoses or faucets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56820747010388,"sku":"B0BWVTBNSL","price":87.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-pistola-frontal.jpg?v=1786965948"},{"product_id":"yamatic-short-pressure-washer-gun-3-8-quick-connect-360-brass-swivel-4000-psi-compact-durable-design","title":"YAMATIC Short Pressure Washer Gun 3\/8\" Quick Connect, 360° Brass Swivel — 4000 PSI, Compact Durable Design","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Short Pressure Washer Gun is a compact, high-strength spray gun with a 360° brass swivel inlet and 3\/8\" quick connect, designed for reliable pressure-washing up to 4000 PSI.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered for homeowners and professionals who need a maneuverable, no-fuss wand for tight spaces, this short power washer gun pairs durable brass fittings, stainless steel internals, and a shockproof handle to deliver consistent performance. It’s built to work with commercial-grade pressure washers (up to 4000 PSI) and includes fittings and nozzle tips so you can start cleaning right away. Note: not for use with garden hoses or low-pressure water sources.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 360-degree swivel inlet improve cleaning?\u003c\/h3\u003e\n\u003cp\u003eThe swivel inlet prevents the high-pressure hose from twisting and kinking, making long cleaning sessions smoother and safer. You can sweep the nozzle without constantly repositioning the hose, which reduces operator fatigue and extends hose life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull 360° rotation to avoid tangles and stress on hose connections\u003c\/li\u003e\n  \u003cli\u003eSolid brass inlet and steel 3\/8\" plug for leak-resistant rotation\u003c\/li\u003e\n  \u003cli\u003eFrees hand movement for precise, continuous strokes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and parts make this gun durable?\u003c\/h3\u003e\n\u003cp\u003eThis short gun combines corrosion-resistant brass connectors, stainless steel internal parts, and a ceramic trigger to withstand frequent use. The heavy-duty construction focuses on leak prevention and long service life under high pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass inlet and 1\/4\" brass quick connector with Teflon tape\u003c\/li\u003e\n  \u003cli\u003eStainless steel internal trigger and steel pole connector for strength\u003c\/li\u003e\n  \u003cli\u003eCeramic trigger components for low vibration and extended durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich accessories and tips are included, and what can they clean?\u003c\/h3\u003e\n\u003cp\u003eThe set ships with a 3\/8\" swivel quick connector, an M22–14mm male coupler, and five spray nozzle tips to handle different spray patterns. The included parts make the gun compatible with common pressure-washer brands and practical across many cleaning tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFive nozzle tips for fan, pinpoint, and soap application\u003c\/li\u003e\n  \u003cli\u003eM22–14mm coupler and quick connector for broad compatibility\u003c\/li\u003e\n  \u003cli\u003eWorks with brands such as SIMPSON, Briggs \u0026amp; Stratton, CRAFTSMAN, Ryobi, Troy-Bilt, Champion, Honda, and Excell\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the short, ergonomic design help during use?\u003c\/h3\u003e\n\u003cp\u003eThe compact snub-nose body and lightweight pull-trigger reduce wrist strain and let you operate the gun one-handed when needed. Its shockproof handle and balanced weight distribution make it easier to control foam cannons or tight-angle cleaning jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShort gun body for superior maneuverability in confined spaces\u003c\/li\u003e\n  \u003cli\u003eLightweight pull-trigger minimizes hand fatigue during long sessions\u003c\/li\u003e\n  \u003cli\u003eShockproof handle provides comfortable, secure grip while working\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC Short Pressure Washer Gun is suited to DIYers, car-detailers, property maintenance crews, and professional cleaners who need a tough, compact spray gun compatible with high-pressure machines up to 4000 PSI. It’s ideal for vehicle washing, patios, roofs, windows, sidewalks, and any application where a shorter, more controllable wand helps reach awkward angles. Avoid connecting it to standard garden hoses; it requires a high-pressure washer and hose to operate safely and effectively. If you have questions or need help with installation, YAMATIC offers 24\/7 customer support and additional pressure-washer accessories through their Power Center Store.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this gun be used with a garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It requires a high-pressure washer and high-pressure hose; it is not compatible with garden hoses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What max pressure is this gun rated for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The YAMATIC short pressure washer gun is built for use with pressure washers up to 4000 PSI.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56822289269076,"sku":"B0CTY5WC5M","price":77.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-short-gun-front-view.jpg?v=1786972877"},{"product_id":"yamatic-pressure-washer-hose-40-ft-1-4-m22-14mm-female-brass-fittings-low-kink-jacket","title":"YAMATIC Pressure Washer Hose 40 ft (1\/4\") M22-14mm Female — Brass Fittings, Low‑Kink Jacket","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Flexible Pressure Washer Hose is a 40-foot, 1\/4\" replacement hose with M22-14mm female fittings, heavy-duty brass connectors, and a non-marking jacket built for easy handling and reliable residential cleaning.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pressure-washer hose tangles, kinks, or wears out too soon, this YAMATIC hose is designed to be a more user-friendly and durable alternative. It swaps in for many popular gas and electric machines that use M22-14mm threads and comes with a quick-connect kit so you can attach or extend it without tools. The combination of a low-memory rubber blend, reinforced bend restrictors, and a rugged outer cover makes this hose easier to coil, gentler on surfaces, and less likely to fail where most hoses do — at the fittings.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose improve handling during cleaning sessions?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses a low-memory blend in a 1\/4\" inner-diameter core so it lays flat when you pull it and recoils neatly when you’re done. That reduces time spent untangling and prevents snags around vehicles, corners, or garden fixtures. Bend restrictors at each end further stabilize the connection so you can drag the hose without stressing the joint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e40-foot length for extended reach without moving the washer\u003c\/li\u003e\n  \u003cli\u003eLow-memory compound resists kinks and coils easily\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty bend restrictors reduce joint stress\u003c\/li\u003e\n  \u003cli\u003eWorks smoothly on driveways, patios, and around vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my pressure washer and what connectors are included?\u003c\/h3\u003e\n\u003cp\u003eThis hose is built for machines that use standard M22-14mm female fittings — common on many Ryobi, Greenworks, Troy-Bilt, Craftsman, Simpson, Honda, Generac, Briggs \u0026amp; Stratton, Westinghouse, Champion, Husqvarna, and DeWalt models. It does not fit brands or tools using a 15mm inner pin such as Sun Joe, Karcher, or AR Blue; confirm your thread size before buying. The package includes solid brass M22-14mm to 3\/8\" quick-connect adapters and a male-to-male coupler so you can convert pumps and guns to snap-on fittings or join hoses for extra reach.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard M22-14mm female fittings (verify your thread size)\u003c\/li\u003e\n  \u003cli\u003eQuick-connect adapters for fast attachment and removal\u003c\/li\u003e\n  \u003cli\u003eMale-to-male coupler to extend reach or link hoses\u003c\/li\u003e\n  \u003cli\u003eSolid brass components for consistent thread engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow tough is the hose for outdoor use and long-term wear?\u003c\/h3\u003e\n\u003cp\u003eDesigned for demanding residential work, the hose combines a reinforced core with a non-marking outer jacket to stand up to rough surfaces and repeated dragging. It’s rated for cold water use up to 140°F and tested with a high burst-pressure margin, while the outer cover resists scuffs and tears that can shorten lesser hoses. Reinforced joints and brass fittings lower the chance of connection blowouts during routine pulling and maneuvering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-marking jacket protects patios and driveways\u003c\/li\u003e\n  \u003cli\u003eReinforced core with very high burst-pressure tolerance\u003c\/li\u003e\n  \u003cli\u003eSolid brass fittings resist thread damage and loosening\u003c\/li\u003e\n  \u003cli\u003eRated for cold-water use up to 140°F (avoid engine exhaust heat)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the connection upgrades speed setup and storage?\u003c\/h3\u003e\n\u003cp\u003eThe included quick-connect kit converts threaded pump and gun ends into snap-on fittings so you can swap accessories or remove the hose in seconds. The hose’s low-memory material and 40-foot length still coil compactly for easier storage, and the coupler lets you add length without relocating heavy equipment. Together these features reduce prep and cleanup time for recurring outdoor tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick-connect adapters for tool-free hookups\u003c\/li\u003e\n  \u003cli\u003eCoupler allows linking to existing hoses for more reach\u003c\/li\u003e\n  \u003cli\u003eMaterial that coils flat for compact storage\u003c\/li\u003e\n  \u003cli\u003eSpeeds attachment changes between jobs and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC 40FT Flexible Pressure Washer Hose is intended for homeowners, detailers, and DIYers who want a longer, easier-to-handle replacement hose for residential pressure washers that use M22-14mm fittings. Choose this hose if you need better coilability, reinforced connection points, quick-connect convenience, and a non-marking jacket for regular outdoor cleaning tasks. Verify your machine’s thread size before ordering to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with Sun Joe or Karcher machines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This hose fits M22-14mm thread machines and will not fit Sun Joe or Karcher models using a 15mm inner pin.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this hose with hot water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s rated for cold water up to 140°F; avoid placing it against hot engine mufflers or very hot water sources.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56824069620052,"sku":"B0DNYDJGT8","price":84.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-hose-coiled.jpg?v=1786980426"},{"product_id":"yamatic-flexible-pressure-washer-hose-50-ft-1-4-m22-14mm-female-3400-psi-kink-resistant-with-brass-fittings","title":"YAMATIC Flexible Pressure Washer Hose 50 ft 1\/4\" M22-14mm Female — 3400 PSI, Kink-Resistant with Brass Fittings","description":"\u003cp\u003e\u003cstrong\u003eYAMATIC's 50-foot flexible pressure washer hose with M22-14mm female fittings is a kink-resistant replacement hose built for residential pressure washers and rated to 3400 PSI working pressure.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hose is designed to replace stiff factory lines on many gas and electric pressure washers that use M22-14mm connections. It pairs a low-memory 1\/4\" hose body with reinforced brass fittings and upgraded bend restrictors so homeowners can pull, route, and coil the hose more easily while cleaning cars, patios, fences, and siding. The outer jacket resists abrasion and is formulated to be non-marking on common hard surfaces; it is intended for cold water use only up to 140°F.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will this hose fit?\u003c\/h3\u003e\n\n\u003cp\u003eThe YAMATIC hose fits pressure washers that use M22-14mm female ends. It was built to be compatible with many popular gas and electric brands, but thread size is the deciding factor.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits machines with M22-14mm male connectors (check your pump or gun thread).\u003c\/li\u003e\n  \u003cli\u003eCommon compatible brands include Ryobi, Greenworks, Troy-Bilt, Craftsman, Generac, Briggs \u0026amp; Stratton, and Westinghouse.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 15mm systems such as Sun Joe, Karcher, or AR Blue Clean—verify before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the hose handle everyday residential cleaning?\u003c\/h3\u003e\n\n\u003cp\u003eEngineered for typical home chores, the hose balances flexibility and durability for routine use. Its low-memory 1\/4\" body reduces kinking and makes it easier to maneuver around vehicles and outdoor surfaces.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRated 3400 PSI working pressure for standard residential tasks.\u003c\/li\u003e\n  \u003cli\u003eBurst pressure specified at 9300 PSI, providing a safety margin in normal use scenarios.\u003c\/li\u003e\n  \u003cli\u003eNon-marking, abrasion-resistant outer jacket protects surfaces and resists scuffs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability features prevent failures at connection points?\u003c\/h3\u003e\n\n\u003cp\u003eThe hose includes reinforced joint upgrades where stress concentrates: solid brass fittings and improved bend restrictors slow wear and reduce strain at the ends. These enhancements help the hose withstand frequent connection, flexing, and coiling during regular cleaning sessions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSolid brass M22-14mm female fittings resist corrosion and thread wear.\u003c\/li\u003e\n  \u003cli\u003eUpgraded bend restrictors reduce sharp bends at the hose ends.\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant jacket reduces surface wear during normal use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any temperature or usage limits I should know?\u003c\/h3\u003e\n\n\u003cp\u003eYes. The hose is intended for cold water pressure-washing only and has a maximum fluid temperature limit. Using hot water above the recommended temperature may damage the hose and void expected performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaximum recommended water temperature: 140°F (60°C).\u003c\/li\u003e\n  \u003cli\u003eDesigned for typical outdoor cleaning—cars, patios, fences, siding—not for hot-water industrial systems.\u003c\/li\u003e\n  \u003cli\u003eFollow pressure washer manufacturer guidance when connecting replacement hoses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC 50 FT M22-14mm hose is aimed at homeowners and DIYers who need a more flexible, user-friendly replacement for their factory hose on compatible M22-14mm pressure washers. It suits people who want easier routing, reduced kinking, and reinforced fittings for frequent residential cleaning chores. Confirm your machine uses M22-14mm connections and that you will only run cold water at or below 140°F before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this hose fit my Ryobi pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Ryobi uses M22-14mm male connectors, yes. Confirm thread size before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use hot water above 140°F with this hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The hose is for cold water only with a 140°F maximum; higher temperatures risk damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56824982995284,"sku":"B0D9V95KHL","price":77.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-view-packaging.jpg?v=1786988423"},{"product_id":"yamatic-brass-garden-hose-quick-connect-fittings-3-4-thread-6-pack-stainless-locking-nitrile-o-ring-seal","title":"YAMATIC Brass Garden Hose Quick-Connect Fittings 3\/4\" Thread 6-Pack — Stainless Locking, Nitrile O‑Ring Seal","description":"\u003cp\u003e\u003cstrong\u003eYAMATIC Brass Garden Hose Quick Connect Fittings are a 6‑piece set of 3\/4\" SAE‑standard quick connectors engineered for a tight, leak‑resistant connection between hoses, faucets, sprayers and accessories.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese quick connect fittings give you a faster, more reliable way to attach and detach garden hoses and watering tools without sacrificing durability. Made from high‑purity industrial brass and stainless locking balls, the set is designed to meet American SAE 3\/4\" thread standards, resist corrosion, and withstand higher pressures than typical consumer fittings. The pack includes multiple plugs and sockets so you can equip several hoses and tools for seamless swapping during yard work, car washing or irrigation tasks.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these connectors prevent leaks and stay secure?\u003c\/h3\u003e\n\u003cp\u003eThe YAMATIC fittings use a precision machining process, a heavy‑duty nitrile o‑ring and a stainless four‑ball locking mechanism to ensure a snug fit and reliable seal. Together these features reduce gaps that cause drips and increase wear resistance compared with coated aluminum or low‑grade brass connectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustry‑grade o‑ring for a consistent seal under repeated use\u003c\/li\u003e\n  \u003cli\u003eStainless 4‑ball locking keeps plugs and sockets locked until intentionally released\u003c\/li\u003e\n  \u003cli\u003ePrecision machined brass bodies for exact thread engagement\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain a close match to SAE 3\/4\" garden hose threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and pressure performance can I expect?\u003c\/h3\u003e\n\u003cp\u003eThese connectors are built from high‑purity brass with stainless steel locking balls, chosen to maximize corrosion resistance and long life in outdoor environments. The parts are rated and engineered to stand up to higher burst pressures than common retail fittings, providing extra peace of mind when using water supply lines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh‑purity industrial brass resists rust and environmental degradation\u003c\/li\u003e\n  \u003cli\u003eStainless locking balls for improved wear resistance\u003c\/li\u003e\n  \u003cli\u003eEngineered to withstand high burst PSI typical of household and light commercial use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and compatibility with existing equipment?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: thread the 3\/4\" sockets to hoses, faucets or adapters and push the plug into the socket until the locking balls engage. These fittings are made to match American SAE standard 3\/4\" garden hose threads, so they plug into most standard U.S. garden hoses and accessories without adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with SAE 3\/4\" garden hose thread standards\u003c\/li\u003e\n  \u003cli\u003eTool‑free push‑to‑connect and quick release action for fast swaps\u003c\/li\u003e\n  \u003cli\u003eMultiple plugs and sockets included to outfit several hoses and tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about care and long‑term use?\u003c\/h3\u003e\n\u003cp\u003eTo preserve the sealing performance, rinse off grit and debris after use and inspect the o‑ring periodically for wear. The combination of quality brass and stainless parts reduces corrosion, but storing the fittings indoors during winter or long idle periods will extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRinse and dry after muddy or sandy jobs to protect the o‑ring\u003c\/li\u003e\n  \u003cli\u003eReplace o‑rings if you notice persistent dripping after connection\u003c\/li\u003e\n  \u003cli\u003eStore indoors or in a dry shed to minimize weather exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners, gardeners, landscapers and anyone who swaps watering tools often will benefit from this YAMATIC 6‑pack of 3\/4\" quick connect fittings. It’s a practical upgrade for people who want faster tool changes, fewer leaks, and stronger corrosion resistance than basic consumer fittings—ideal for garden work, pressure washing, RV hookups, and multi‑tool outdoor setups. If you need a reliable, SAE‑compatible quick connect system that can outfit several hoses and accessories at once, this set provides a durable, user‑friendly solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these fittings compatible with standard U.S. garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They use SAE‑standard 3\/4\" garden hose threads and fit most U.S. hoses and accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix these plugs with other brands' quick connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can, but best sealing is achieved when both plug and socket are YAMATIC; using mixed brands may reduce fit tolerance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56829301555540,"sku":"B094J3N761","price":64.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-brass-quick-connect-front-packaging.jpg?v=1786997346"},{"product_id":"yamatic-pressure-washer-hose-30-ft-1-4-m22-14mm-female-flexible-quick-connect-brass-fittings","title":"YAMATIC Pressure Washer Hose 30 ft 1\/4\" M22-14mm Female — Flexible, Quick-Connect Brass Fittings","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Flexible Pressure Washer Hose is a 30-foot, 1\/4\" replacement hose with M22-14mm fittings, reinforced joints, and a quick-connect kit for reliable residential power-washing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your factory pressure-washer hose kinks, fights you on the driveway, or fails at the connection, this YAMATIC hose offers an easy upgrade. It pairs a low-memory, lay-flat construction with heavy-duty bend restrictors, brass fittings, and a non-marking jacket rated for everyday home use. Included quick-connect adapters make swapping or extending hoses fast without tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the hose stay flexible and tangle-free during cleaning?\u003c\/h3\u003e\n\u003cp\u003eThis hose uses a premium low-memory blend and a 1\/4\" inner diameter to remain pliable while laying flat as you work, so you spend less time untangling lines. The material coils neatly for storage and reduces drag when moving around vehicles or landscaping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e30-foot length for wide reach without moving the washer\u003c\/li\u003e\n  \u003cli\u003eLow-memory polymer core resists kinking\u003c\/li\u003e\n  \u003cli\u003e1\/4\" inner diameter balances flow and flexibility\u003c\/li\u003e\n  \u003cli\u003eCoils easily for compact storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my pressure washer and what adapters are included?\u003c\/h3\u003e\n\u003cp\u003eThe hose is built for pressure washers that use standard M22-14mm female connections (common on many gas and electric units). YAMATIC supplies solid brass M22-14mm to 3\/8\" quick-connect fittings and a male-to-male coupler so you can adapt pump, gun, or existing hoses quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Ryobi, Greenworks, Craftsman, Simpson, Honda, and similar brands\u003c\/li\u003e\n  \u003cli\u003eIncludes M22-14mm to 3\/8\" quick-connect adapters and extension coupler\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Sun Joe, Karcher, or AR Blue 15mm-pin systems\u003c\/li\u003e\n  \u003cli\u003eVerify thread size before ordering to ensure fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the hose under regular residential use?\u003c\/h3\u003e\n\u003cp\u003eDesigned for everyday household cleaning, the hose pairs a reinforced core with a non-marking outer jacket to resist abrasion and scuffs. End connections are fortified with bend restrictors and solid brass fittings to reduce failure at stress points, and the assembly is cold-water rated for up to 140°F.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced core with 8700 PSI burst pressure for safety margin\u003c\/li\u003e\n  \u003cli\u003e3200 PSI working rating for typical residential machines\u003c\/li\u003e\n  \u003cli\u003eNon-marking outer cover resists tearing and scuffs on concrete\u003c\/li\u003e\n  \u003cli\u003eBend restrictors and brass fittings protect connection points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I extend or convert my current setup with this hose?\u003c\/h3\u003e\n\u003cp\u003eThe included quick-connect kit lets you convert threaded M22 fittings to snap-on connectors or join two hoses for extra reach without moving your pressure washer. That flexibility helps when cleaning tall trucks, second-story siding, or hard-to-reach corners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSnap-on quick connects for tool-free attachment changes\u003c\/li\u003e\n  \u003cli\u003eMale-to-male coupler to link hoses and extend reach\u003c\/li\u003e\n  \u003cli\u003eWorks with standard 3\/8\" quick-connect accessories and guns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Homeowners and hobbyists who want a lighter, more manageable replacement for stiff factory pressure-washer hoses. Ideal for people who clean vehicles, driveways, patios, fences, or siding and need a reliable 30-foot reach with easy quick-connect adaptability. Confirm your machine uses M22-14mm threads before purchasing to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with my pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits washers using standard M22-14mm female connections. Not compatible with Sun Joe, Karcher, or AR Blue 15mm-pin systems—verify your thread size before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure and temperature can this hose handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hose has a 3200 PSI working rating, 8700 PSI burst core, and is cold-water rated up to 140°F; avoid contact with hot engine parts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56830075961684,"sku":"B0D7VGH837","price":75.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-30ft-hose.jpg?v=1787000995"},{"product_id":"yamatic-pressure-washer-hose-50-ft-m22-14mm-female-flexible-kink-resistant-3200-psi","title":"YAMATIC Pressure Washer Hose 50 ft M22-14mm Female — Flexible, Kink-Resistant 3200 PSI","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Flexible Pressure Washer Hose 50 FT 1\/4\" with M22-14mm female fittings is a lightweight, kink-resistant replacement hose built for residential pressure washers and everyday outdoor cleaning tasks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 50-foot YAMATIC hose is designed as a drop-in replacement for pressure washers that use M22-14mm connections. It swaps in for the stiff factory line with a softer, low-memory polymer body and upgraded fittings so you can reach farther around cars, patios, fences, and siding without fighting coils or weak connection points. Rated for typical homeowner pressures, it’s optimized for convenience and longer service life during routine cleaning jobs.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hose fit my pressure washer?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses M22-14mm female ends, compatible with many common gas and electric models. Before ordering, verify your machine’s outlet thread is M22-14mm; this hose is not compatible with 15mm quick-connect systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with brands like Ryobi, Greenworks, Troy-Bilt, Craftsman, Generac, Briggs \u0026amp; Stratton, and Westinghouse.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for 15mm systems such as Sun Joe, Karcher, and AR Blue Clean.\u003c\/li\u003e\n  \u003cli\u003eReplace the factory hose easily when your unit uses M22-14mm fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and flexible is the hose for everyday tasks?\u003c\/h3\u003e\n\u003cp\u003eThe hose body is engineered for flexibility and low memory so it resists kinks and is easy to route and coil after use. The outer jacket is abrasion-resistant and non-marking to protect surfaces where the hose may rub during cleaning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-memory 1\/4\" construction reduces kinks and tangles during use.\u003c\/li\u003e\n  \u003cli\u003eNon-marking outer cover minimizes scuffs on driveways and decks.\u003c\/li\u003e\n  \u003cli\u003eCold-water only; maximum operating temperature 140°F (60°C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat about fittings and pressure ratings?\u003c\/h3\u003e\n\u003cp\u003eYAMATIC upgraded the hose ends with reinforced joints and solid brass fittings to withstand repeated connections and reduce stress at the high-wear points. The hose is rated for common residential pressures, giving a wide safety margin for everyday cleaning chores.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass M22-14mm female fittings for corrosion resistance and secure seals.\u003c\/li\u003e\n  \u003cli\u003eReinforced bend restrictors reduce strain where hose meets fitting.\u003c\/li\u003e\n  \u003cli\u003eWorking pressure 3200 PSI and burst pressure 8700 PSI—sized for home use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this hose make outdoor cleaning easier?\u003c\/h3\u003e\n\u003cp\u003eThe extended 50-foot length lets you reach farther from the machine without dragging the unit everywhere, while the flexible design makes maneuvering around obstacles simpler. It speeds common tasks and reduces handling fatigue compared with stiff factory hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50 ft length increases reach for cars, siding, patios and fences.\u003c\/li\u003e\n  \u003cli\u003eFlexible profile eases pulling and coiling for storage and transport.\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant jacket stands up to contact with rough surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC Flexible Pressure Washer Hose 50 FT 1\/4\" M22-14mm female is aimed at homeowners and DIYers who need a longer, more maneuverable replacement hose for M22-equipped pressure washers. It’s a practical upgrade for anyone wanting less kinking, stronger fittings, and a non-marking jacket for routine washing tasks around vehicles, decks, patios, and siding. Check your machine’s thread size before purchasing to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with Karcher or Sun Joe pressure washers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This hose uses M22-14mm female fittings and is not compatible with 15mm systems like Karcher or Sun Joe.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure can this hose handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hose is rated for 3200 PSI working pressure and 8700 PSI burst pressure, suitable for typical residential cleaning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56830089298260,"sku":"B0BHQBBTGJ","price":75.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-50ft-hose.jpg?v=1787001144"},{"product_id":"yamatic-flexible-pressure-washer-hose-25-ft-1-4-m22-14mm-female-3200-psi-brass-fittings","title":"YAMATIC Flexible Pressure Washer Hose 25 ft 1\/4\" M22-14mm Female — 3200 PSI, Brass Fittings","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Flexible Pressure Washer Hose is a 25-foot, 1\/4\" inner-diameter replacement hose with M22-14mm female fittings, heavy-duty brass ends, and a non-marking jacket built for up to 3200 PSI residential cleaning.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hose swaps out stiff factory lines for a low-memory, easy-coil design that makes pressure-washing around cars, patios, and equipment faster and less frustrating. It comes with reinforced bend restrictors at the ends, solid brass fittings, and a quick-connect conversion kit so you can attach or extend quickly. Rated for cold water applications (up to 140°F), the YAMATIC hose balances flexibility with durability for frequent homeowner use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose improve maneuverability around vehicles and tight spaces?\u003c\/h3\u003e\n\u003cp\u003eThe low-memory material helps the hose lay flat and uncoil smoothly, so you spend less time untangling or wrestling with a springy line. That flexibility shortens prep and cleanup time, letting you focus on the job rather than managing the hose.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e25-foot length reaches around most cars and small yards without moving the washer.\u003c\/li\u003e\n  \u003cli\u003e1\/4\" inner diameter maintains water flow while keeping the hose manageable.\u003c\/li\u003e\n  \u003cli\u003eLow-memory polymer reduces kinks and recoiling during use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my pressure washer model and existing fittings?\u003c\/h3\u003e\n\u003cp\u003eYAMATIC’s hose is built for standard M22-14mm female thread systems used by many gas and electric brands. It ships with solid brass quick-connect adapters and a male-to-male coupler to convert or extend your setup quickly. Check your machine’s thread size before buying; it will not fit brands that use 15mm inner pins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Ryobi, Greenworks, Troy-Bilt, Craftsman, Simpson, Honda, Generac, Briggs \u0026amp; Stratton, Westinghouse, Champion, Husqvarna, DeWalt, and similar M22-14mm systems.\u003c\/li\u003e\n  \u003cli\u003eNot compatible: Sun Joe, Karcher, AR Blue that require 15mm inner pin fittings.\u003c\/li\u003e\n  \u003cli\u003eIncludes M22-14mm to 3\/8\" quick connects and a male-to-male extension coupler for easy conversion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the hose for regular outdoor use and rough surfaces?\u003c\/h3\u003e\n\u003cp\u003eThe hose combines a reinforced inner core and a non-marking outer jacket to resist abrasion from concrete and brick while protecting finished surfaces. Bend restrictors at the ends and solid brass fittings reduce joint stress, which is where most failures occur during repeated pulling and dragging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated working PSI: 3200 PSI; burst pressure of the core: 8700 PSI for safety margin.\u003c\/li\u003e\n  \u003cli\u003eNon-marking jacket prevents scuffs on driveways and patios while resisting tears.\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty bend restrictors and brass fittings improve longevity at connection points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there temperature or usage limits I should be aware of?\u003c\/h3\u003e\n\u003cp\u003eThis hose is intended for cold water pressure-washing up to about 140°F; it’s not intended for high-temperature steam cleaning. Keep the hose away from hot engine parts, mufflers, and direct flame to avoid melting or jacket damage. Regularly inspect fittings and jacket before use for safe, consistent operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-water rated up to approximately 140°F; not for steam or high-temperature applications.\u003c\/li\u003e\n  \u003cli\u003eAvoid contact with hot engine components to prevent melting the jacket.\u003c\/li\u003e\n  \u003cli\u003eInspect brass fittings and bend restrictors periodically for wear or damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners and hobbyists who need a flexible, easy-to-handle replacement hose for common M22-14mm pressure washers. It's ideal for car enthusiasts, small property owners, and anyone who wants quicker setup and fewer snags than with stiff factory hoses. If you need a longer, durable residential hose with quick-connect capability and a non-marking cover, the YAMATIC 25FT flexible hose is designed to make routine cleaning faster and less cumbersome.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hose fit a Sun Joe pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, Sun Joe uses a 15mm inner-pin fitting; this YAMATIC hose is for M22-14mm systems only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I connect this hose to my existing hose for more length?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes a male-to-male coupler to link to another hose for extra reach.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56830089429332,"sku":"B0BHQ87ZXT","price":72.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging_79182766-d7cf-4853-9cd9-68cc988a7a89.jpg?v=1787001146"},{"product_id":"yamatic-pressure-washer-hose-25-ft-1-4-id-m22-14mm-3200-psi-low-memory-brass-fittings","title":"YAMATIC Pressure Washer Hose 25 ft (1\/4\" ID, M22-14mm) — 3200 PSI, low-memory, brass fittings","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC 25 FT Flexible Pressure Washer Hose is a 1\/4\" ID, M22-14mm replacement hose that delivers a low-memory, reinforced design with brass fittings, a quick-connect kit, and a 3200 PSI non-marking jacket for residential pressure-washing tasks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hose is built to replace rigid factory lines and make outdoor cleaning faster and less frustrating. It fits most gas and electric washers that use M22-14mm female connections, offers a coiling, low-memory construction, and includes quick-connect hardware so you can snap the hose onto your gun or pump without special tools. Engineered reinforcements at stress points and a tough outer layer give this hose a long service life while resisting scuffs and abrasions on common driveway and patio surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hose fit my pressure washer model?\u003c\/h3\u003e\n\u003cp\u003eCheck the connection thread size on your machine before ordering. YAMATIC's hose uses the M22-14mm female standard common on many brands, but it is not universal—some manufacturers use a 15mm inner pin instead.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible brands: Ryobi, Greenworks, Troy-Bilt, Craftsman, Simpson, Honda, Generac, Briggs \u0026amp; Stratton, Westinghouse, Champion, Husqvarna, DeWalt.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with: Sun Joe, Karcher, AR Blue (15mm inner pin).\u003c\/li\u003e\n  \u003cli\u003eIncludes M22-14mm to 3\/8\" quick-connect fittings and a male-to-male coupler for flexible setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the hose under regular use?\u003c\/h3\u003e\n\u003cp\u003eThe hose combines a high-burst reinforced core with a non-marking outer jacket to withstand typical residential pressures and rough handling. Bend restrictors and solid brass fittings target the common failure at the hose ends, reducing the chance of leaks or connection blowouts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCore tested at 8700 PSI burst pressure; rated for working pressures up to 3200 PSI.\u003c\/li\u003e\n  \u003cli\u003eReinforced joint design and heavy-duty bend restrictors increase longevity.\u003c\/li\u003e\n  \u003cli\u003eNon-marking jacket resists tearing and scuffs on concrete and brick.\u003c\/li\u003e\n  \u003cli\u003eCold water rated up to 140°F—keep away from hot engine parts to avoid melting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat advantages does the low-memory 25 ft length provide?\u003c\/h3\u003e\n\u003cp\u003eThe 25-foot length balances reach and manageability for cleaning cars, decks, and patios without dragging your pressure washer closer. Its low-memory material lays flat during use and recoils smoothly for storage, cutting setup and breakdown time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLess kinking and tangling compared with standard stiff hoses.\u003c\/li\u003e\n  \u003cli\u003eEasier maneuvering around vehicles and obstacles while cleaning.\u003c\/li\u003e\n  \u003cli\u003eCoils compactly for efficient storage in sheds or on reels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I get in the quick-connect kit and how will it help?\u003c\/h3\u003e\n\u003cp\u003eThe included hardware converts threaded M22-14mm connections into snap-on quick connects, so you can attach or detach the hose rapidly without tools. This makes switching accessories or linking hoses straightforward and reduces downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass M22-14mm to 3\/8\" quick-connect fittings included.\u003c\/li\u003e\n  \u003cli\u003eMale-to-male extension coupler for joining hoses or extending reach.\u003c\/li\u003e\n  \u003cli\u003eDurable brass components for reliable, leak-resistant connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The YAMATIC 25 FT Flexible Pressure Washer Hose is aimed at homeowners and DIYers who want a more manageable, durable replacement for factory hoses. It suits users who need extra reach without sacrificing flow or who want quick-connect convenience for frequent accessory changes. Avoid ordering if your machine uses a 15mm inner-pin connector—confirm your thread size first.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with Sun Joe or Karcher pressure washers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Sun Joe and Karcher often use a 15mm inner pin; this hose is M22-14mm and will not fit those models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the hose include quick-connect fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It comes with brass M22-14mm to 3\/8\" quick-connect fittings and a male-to-male coupler for easy attachment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56830127636820,"sku":"B09LV94JF3","price":72.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-view-hose-attached.jpg?v=1787001702"},{"product_id":"yamatic-stainless-steel-garden-hose-quick-connectors-3-4-2-pack-push-to-connect-leak-resistant","title":"YAMATIC Stainless Steel Garden Hose Quick Connectors 3\/4\" 2‑Pack — Push‑to‑Connect, Leak‑Resistant","description":"\u003cp\u003e\u003cstrong\u003eThese are two heavy‑duty 3\/4\" stainless steel quick‑connect fittings from YAMATIC that let you snap garden hoses and accessories together quickly and leak‑resistantly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from full‑body stainless steel with precision machining, this 2‑pack of 3\/4\" garden hose quick connectors fits standard American (SAE) garden hose threads and is made to resist corrosion, reduce leaks, and survive repeated outdoor use. The design pairs a four‑ball locking mechanism with a robust o‑ring to give a close, secure seal that performs better than many brass or coated aluminum alternatives. Each connector is engineered to handle high pressure and frequent connections so you can swap sprayers, timers, and other tools without tools or tape.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these quick connectors make changing watering tools faster?\u003c\/h3\u003e\n\n\u003cp\u003eThey let you connect and disconnect hoses, nozzles, or watering accessories in a single motion rather than screwing fittings together each time. The push‑and‑lock mechanism speeds swaps, while the tight seal reduces drips so you can move between tasks faster and with less waste.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush‑to‑connect design for tool‑free swaps\u003c\/li\u003e\n  \u003cli\u003eFour‑ball stainless locking secures fittings during use\u003c\/li\u003e\n  \u003cli\u003eDurable o‑ring minimizes leaks after repeated connects\u003c\/li\u003e\n  \u003cli\u003eFits American standard 3\/4\" (SAE) garden hose thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill stainless steel really hold up better than brass or aluminum?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the connectors are made from full‑body stainless steel for superior corrosion and rust resistance in outdoor environments. That material choice plus precision machining helps them maintain a tight seal, stay dimensionally stable, and look better over years of exposure compared with plated or coated metals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull stainless body resists rust and weathering\u003c\/li\u003e\n  \u003cli\u003ePrecision machining reduces wear points and misfits\u003c\/li\u003e\n  \u003cli\u003eLead‑free construction meets common environmental standards\u003c\/li\u003e\n  \u003cli\u003eBuilt to withstand high pressure and repeated cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these connectors leak‑proof and pressure‑rated?\u003c\/h3\u003e\n\n\u003cp\u003eThey are designed for a leak‑resistant connection using a heavy‑duty o‑ring and a four‑ball locking system that together create a close match between plug and socket. YAMATIC engineers built them to endure frequent use and handle high pressure bursts typical in garden applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustry‑grade o‑ring for durable sealing\u003c\/li\u003e\n  \u003cli\u003eFour stainless locking balls for secure engagement\u003c\/li\u003e\n  \u003cli\u003eTested for high burst pressure and repeated cycles\u003c\/li\u003e\n  \u003cli\u003eRecommended to pair the plug and socket from the same brand for best fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use and maintain these quick connectors for long life?\u003c\/h3\u003e\n\n\u003cp\u003eUsing them is straightforward: screw the threaded end to your hose or accessory, then push the mating part into place until it locks. Periodic rinsing and occasional lubrication of the o‑ring will keep the connection smooth and prevent debris from causing leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eScrew 3\/4\" threaded end to hose or tool; hand tighten securely\u003c\/li\u003e\n  \u003cli\u003ePush the mating connector in until it snaps and locks\u003c\/li\u003e\n  \u003cli\u003eRinse and check o‑ring for dirt; apply silicone lubricant if needed\u003c\/li\u003e\n  \u003cli\u003eStore indoors or covered during winter to prolong service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Home gardeners, landscapers, and anyone who swaps hoses and watering tools frequently and wants a durable, rust‑resistant connection. This 2‑pack suits users who prefer tool‑free quick changes, need reliable seals for high‑pressure watering, or want long‑lasting fittings that won’t corrode over seasons.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fit my standard garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they are made for American SAE standard 3\/4\" garden hose threads and fit typical hoses and accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix these with other brands' quick connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mixing is possible but not recommended; best leak performance comes from using YAMATIC plugs and sockets together.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56830222860628,"sku":"B09D7MGYRT","price":55.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-view-pair.jpg?v=1787002874"},{"product_id":"yamatic-pressure-washer-hose-30-ft-1-4-inch-m22-14mm-low-memory-brass-fittings","title":"YAMATIC Pressure Washer Hose 30 ft 1\/4-inch M22-14mm — Low-Memory, Brass Fittings","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Flexible Pressure Washer Hose is a 30-foot, 1\/4\" replacement hose with M22-14mm fittings, non-marking jacket, and reinforced joints for reliable residential pressure washing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSwap out bulky, memory-prone factory lines with a hose built to move easily around cars, decks, and garden equipment. This YAMATIC hose uses a low-memory compound so it lays flat while you work and recoils neatly when you’re done. It pairs with most standard M22-14mm pressure washer connections and comes with brass quick-connect adapters so you can get back to cleaning without extra trips to the hardware store.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose make pressure washing less frustrating?\u003c\/h3\u003e\n\u003cp\u003eThe low-memory inner tube resists kinking and stays pliable, so you spend less time untangling and more time cleaning. Heavy-duty bend restrictors protect the ends where hoses usually fail, and solid brass fittings provide a secure, leak-resistant interface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e30 ft length for extended reach without moving the machine\u003c\/li\u003e\n  \u003cli\u003e1\/4-inch ID for strong flow while remaining flexible\u003c\/li\u003e\n  \u003cli\u003eBrass fittings and bend protectors to reduce joint failures\u003c\/li\u003e\n  \u003cli\u003eCoils flat for compact storage and quick deployment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my pressure washer and accessories?\u003c\/h3\u003e\n\u003cp\u003eThis hose is made for machines and guns that use standard M22-14mm female connections—common on many gas and electric models. Included brass adapters let you convert to 3\/8\" quick connects or link another hose for extra reach; however, it won’t fit brands that use a 15mm inner pin.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Ryobi, Greenworks, Troy-Bilt, Craftsman and similar\u003c\/li\u003e\n  \u003cli\u003eIncludes M22-14mm to 3\/8\" quick connect and male-to-male coupler\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Sun Joe, Karcher, AR Blue with 15mm inner pin\u003c\/li\u003e\n  \u003cli\u003eVerify thread size before purchase to ensure fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow tough is the hose for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe outer jacket is engineered to resist abrasion and hide scuffs so you can drag the hose across concrete, brick, and wood without marking surfaces. Internally it’s reinforced to handle high pressure safely while offering a high burst rating for peace of mind during typical homeowner jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-marking outer cover protects driveways and patios\u003c\/li\u003e\n  \u003cli\u003eRated working pressure to handle demanding residential tasks\u003c\/li\u003e\n  \u003cli\u003e8700 PSI burst-rated core for durability beyond daily use\u003c\/li\u003e\n  \u003cli\u003eCold-water rated up to 140°F; avoid contact with hot engine parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do the included adapters and fittings do for me?\u003c\/h3\u003e\n\u003cp\u003eThe quick-connect kit removes the hassle of threaded swaps—snap your gun or wand on and go. The male-to-male coupler lets you extend reach by joining this hose to another, and the solid brass construction reduces wear and leaks at connection points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM22-14mm to 3\/8\" quick connects for fast gun attachment\u003c\/li\u003e\n  \u003cli\u003eMale-to-male coupler for easy hose extension\u003c\/li\u003e\n  \u003cli\u003eSolid brass parts for corrosion resistance and secure seals\u003c\/li\u003e\n  \u003cli\u003eReduces downtime when switching tools or adding length\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Homeowners and DIY enthusiasts who need a reliable, easy-to-handle replacement hose for everyday pressure-washing tasks will find this YAMATIC 30 ft hose ideal. It’s designed for people who want faster setup, fewer kinks, and strong, leak-resistant connections when cleaning cars, siding, patios, and outdoor equipment. Confirm your machine uses M22-14mm fittings before ordering to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with Sun Joe or Karcher pressure washers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This hose uses M22-14mm fittings and will not fit Sun Joe or Karcher models that use a 15mm inner pin.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I connect this to my existing hose to gain extra reach?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a male-to-male coupler so you can join this hose to another for added length.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56830436049236,"sku":"B0BWJV96ZL","price":75.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-hose_2eea28e2-76cb-4512-a828-4805ed18e899.jpg?v=1787004712"},{"product_id":"yamatic-pressure-washer-hose-50-ft-1-4-id-3400-psi-m22-14mm-female-rotating-fittings","title":"YAMATIC Pressure Washer Hose 50 ft 1\/4\" ID — 3400 PSI, M22-14mm Female Rotating Fittings","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC 50 ft pressure washer hose is a 1\/4\" ID, 3400 PSI-rated replacement hose with preinstalled M22-14mm female rotating fittings for compatible pressure washers and spray guns.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis durable hose is engineered for homeowners and DIYers who need a long, flexible connection between their pressure washer and wand or gun. It combines a PVC inner tube, fiber-braided reinforcement, and a PVC cover to stand up to routine outdoor cleaning tasks while remaining compliant with RoHS material standards. The hose ships with both ends fitted with M22-14mm female rotating nuts, so confirm your machine and accessories use matching M22-14mm male ports before purchase. No adapters are included.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the hose handle high-pressure cleaning jobs?\u003c\/h3\u003e\n\u003cp\u003eThe YAMATIC hose supports a working pressure of up to 3400 PSI and a burst pressure of 10200 PSI, making it suitable for many electric and gas pressure washers within that rating. Its fiber-braided reinforcement helps it hold shape under pressure while the PVC inner tube resists water exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 3400 PSI; burst pressure: 10200 PSI.\u003c\/li\u003e\n  \u003cli\u003eInner diameter: 1\/4\" for strong flow and compatibility with common spray guns.\u003c\/li\u003e\n  \u003cli\u003eRated for water temperatures up to 140°F (60°C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fittings work with my pressure washer and attachments?\u003c\/h3\u003e\n\u003cp\u003eBoth ends of the hose come with M22-14mm female rotating fittings preinstalled, designed to mate with M22-14mm male ports on pressure washers and guns. Because the hose includes only female fittings, you should verify that your machine and accessories have matching male threads—adapters are not provided.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePreinstalled M22-14mm female fittings on both ends.\u003c\/li\u003e\n  \u003cli\u003eRotating nuts make quick hand-tight connections easier.\u003c\/li\u003e\n  \u003cli\u003eCheck device ports for M22-14mm male threads before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long and flexible is the hose for real-world use?\u003c\/h3\u003e\n\u003cp\u003eAt 50 feet, this hose offers extended reach to access vehicles, driveways, patios, and other outdoor areas without moving the pressure washer frequently. The fiber-braided core produces a kink-resistant profile in normal use; still, fully uncoil the hose before pressurizing and avoid tight bends to maximize service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 50 ft for wide coverage without relocating the unit.\u003c\/li\u003e\n  \u003cli\u003eKink-resistant fiber braid reduces sharp bends during routing.\u003c\/li\u003e\n  \u003cli\u003eBest practice: uncoil, warm if cold, and avoid tight wraps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and care should I expect to extend lifespan?\u003c\/h3\u003e\n\u003cp\u003eThe hose is built from a PVC inner tube and outer cover with a fiber-braided reinforcement layer for strength and flexibility. It is made from RoHS-compliant materials and performs well with typical outdoor detergents and water temperatures below 140°F. Rinse, drain, and store coiled away from direct sun and freezing conditions to preserve integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction: PVC inner\/outer + fiber-braided reinforcement.\u003c\/li\u003e\n  \u003cli\u003eRoHS-compliant materials for safer handling and disposal.\u003c\/li\u003e\n  \u003cli\u003eStorage: drain water, avoid freezing, keep in shade to prevent UV degradation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC 50 ft, 1\/4\" pressure washer hose is ideal for homeowners, car-detailers, and small business users who need a long, dependable hose with M22-14mm female fittings. Choose this hose if your pressure washer and accessories have M22-14mm male ports and you want a kink-resistant, RoHS-compliant line rated to 3400 PSI for routine exterior cleaning tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hose include adapters for non-M22 fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The hose has M22-14mm female fittings on both ends and does not include adapters. Confirm your ports are M22-14mm male before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this hose with hot water cleaners?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is rated for water temperatures up to 140°F (60°C). Avoid using with hotter water to prevent damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56830709924180,"sku":"B0DPV3JW68","price":74.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-hose_ef75e65b-d89c-478e-8432-703d4d7ae19b.jpg?v=1787007335"},{"product_id":"yamatic-pressure-washer-hose-50-ft-m22-1-4-in-3400-psi-brass-fittings-kink-resistant","title":"YAMATIC pressure washer hose 50 ft M22 1\/4 in — 3400 PSI, brass fittings, kink-resistant","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC 50 ft 1\/4\" M22 pressure washer hose is a heavy-duty, kink-resistant replacement hose rated for up to 3400 PSI and built with solid brass M22 fittings for leak-resistant, long-lasting cleaning performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a direct-fit replacement for many gas and electric power washers, this YAMATIC hose pairs universal M22 threading with a reinforced braided outer jacket to withstand high-pressure jobs. It’s engineered to resist kinks, abrasion, and UV aging while maintaining flexibility so you can move freely around vehicles, decks, siding, and hard-to-reach areas. The hose’s construction and fittings aim to reduce leaks and extend service life compared with basic OEM hoses.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hose fit my pressure washer?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses the standard American M22 14mm thread, compatible with most consumer and professional machines. It’s intended to replace hoses on brands that accept M22 connections, including many models from Troy-Bilt, Simpson, Dewalt, Craftsman, Ryobi, and others.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnector: industry-standard M22 1\/4\" (14mm) brass fittings\u003c\/li\u003e\n  \u003cli\u003eLength: 50 feet for extended reach without extensions\u003c\/li\u003e\n  \u003cli\u003ePressure rating: up to 3400 PSI suitable for higher-pressure units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and flexible is the hose in real use?\u003c\/h3\u003e\n\u003cp\u003eYAMATIC engineered the hose with a high-density braided layer and durable outer material to resist wear, sunlight, and repeated bending. The braid evens out internal pressure to prevent weak spots and bubbles, while the outer compound quickly returns to shape after compression so it resists kinking in normal operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-density braid disperses pressure evenly to avoid bulges\u003c\/li\u003e\n  \u003cli\u003eKink-resistant outer material restores shape after pressure\u003c\/li\u003e\n  \u003cli\u003eUV- and abrasion-resistant shell for longer outdoor life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the fittings and handles built to last under high pressure?\u003c\/h3\u003e\n\u003cp\u003eThe hose features solid brass M22 fittings to resist rust and deformation under heavy water flow. YAMATIC’s updated splice and handle design reinforce the joint area, reducing stress at connection points and minimizing the chance of leaks from repeated bending or impact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass M22 fittings: corrosion-resistant and sturdy\u003c\/li\u003e\n  \u003cli\u003eReinforced splice process for tighter seal and strength\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty restrictors at joints to limit bending and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this hose improve everyday cleaning chores?\u003c\/h3\u003e\n\u003cp\u003eWith its 50-foot reach and kink resistance, the YAMATIC hose helps you cover larger areas without moving the washer as often. Its robust construction reduces downtime from leakage or wear, while flexibility makes handling easier for multi-angle cleaning tasks like gutters, cars, and patios.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLong reach reduces need to relocate washer between tasks\u003c\/li\u003e\n  \u003cli\u003eKink resistance lowers hand fatigue and improves flow consistency\u003c\/li\u003e\n  \u003cli\u003eDurable materials reduce replacements and maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners, rental operators, and contractors who need a reliable, long-reach replacement hose with industrial-grade fittings. It’s a strong choice if you own a pressure washer that accepts M22 connections and you want improved abrasion resistance, fewer leaks, and a hose that stays flexible in typical outdoor conditions. Avoid if your machine uses non-M22 fittings or requires a different diameter or pressure rating.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the YAMATIC hose compatible with my Simpson or Ryobi washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your washer uses standard M22 14mm fittings, this hose will fit models from Simpson, Ryobi, and many other brands.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose handle hot water and high PSI?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s rated up to 3400 PSI and built for high-pressure cleaning; check your washer’s maximum temperature specs before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56830934647124,"sku":"B0D9V87LW4","price":75.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-hose-front-packaging.jpg?v=1787009536"},{"product_id":"yamatic-adjustable-chemical-injector-kit-for-pressure-washer-m22-14mm-downstream-soap-injector-adjustable-metering-valve-4500","title":"YAMATIC Adjustable Chemical Injector Kit for Pressure Washer — M22-14mm Downstream Soap Injector, Adjustable Metering Valve, 4500","description":"\u003cp\u003e\u003cstrong\u003eYAMATIC Adjustable Chemical Injector Kit is a downstream soap injector that lets you meter and apply cleaning solutions through a pressure washer safely and accurately at low pressure.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis downstream injector kit pairs durable metal fittings with a controllable metering valve and siphon hose so you can introduce detergents or cleaning chemicals after the pump. It connects between an M22-14mm pump outlet and M22-14mm high-pressure hose, operates across a wide flow range, and is built to resist corrosion. Designed for use at reduced pressure (250 PSI or less) and compatible with common gas and electric washers, it gives you adjustable dilution without routing chemicals through your pump.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the YAMATIC injector attach to my pressure washer?\u003c\/h3\u003e\n\u003cp\u003eThe unit uses standard M22 quick-connect fittings that insert between the pump outlet and the high-pressure hose. Installation is tool-minimal: disconnect your high-pressure hose from the pump, insert the injector coupler, then reconnect. The kit’s M22-14mm compatibility matches most consumer and professional pressure washers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard M22-14mm male\/female couplers for direct fit\u003c\/li\u003e\n  \u003cli\u003eInstalls inline between pump outlet and hose\u003c\/li\u003e\n  \u003cli\u003eNo permanent modification to the pump required\u003c\/li\u003e\n  \u003cli\u003eWorks with most gas and electric washers rated within specified pressure limits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen and why should I use downstream (low-pressure) injection?\u003c\/h3\u003e\n\u003cp\u003eDownstream injection withdraws chemicals after the pump so cleaners never pass through internal pump seals. Use it for detergent application, rinsing, or when the chemical supplier recommends low-pressure delivery. Note that the injector functions only when the washer is running at low pressure (generally 250 PSI or below) and with the correct soap nozzle to draw solution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents chemicals from contacting pump internals\u003c\/li\u003e\n  \u003cli\u003eIdeal for soaps, foams, and non-corrosive cleaning agents\u003c\/li\u003e\n  \u003cli\u003eOperates properly only at low-pressure spray settings\u003c\/li\u003e\n  \u003cli\u003eRequires the included large-orifice black soap nozzle for siphoning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I control dilution and flow with this kit?\u003c\/h3\u003e\n\u003cp\u003eThe injector includes an adjustable metering valve so you can set how much concentrate is drawn into the water stream. Water flow range compatibility spans approximately 2 to 5 gallons per minute; adjust both your washer’s flow\/nozzle and the valve to achieve the desired mix ratio. Tighten or open the valve to decrease or increase chemical pickup respectively.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMetering valve provides on-the-fly dilution control\u003c\/li\u003e\n  \u003cli\u003eEffective with 2–5 GPM water flow rates\u003c\/li\u003e\n  \u003cli\u003eFine-tune mix for different surfaces and cleaners\u003c\/li\u003e\n  \u003cli\u003eSimple manual adjustment—no electronics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and operating limits of the injector?\u003c\/h3\u003e\n\u003cp\u003eConstructed with stainless steel and brass components, the injector resists wear and corrosion for extended service life. It’s rated for working pressures up to 4000 PSI but intended to inject chemicals only under low-pressure conditions (≤250 PSI). Temperature range covers typical cleaning scenarios from freezing to warm water use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel and brass construction for durability\u003c\/li\u003e\n  \u003cli\u003eMaximum working pressure: 4000 PSI (use chemicals at low pressure)\u003c\/li\u003e\n  \u003cli\u003eTemperature range: 32°F to 122°F (0°C–50°C)\u003c\/li\u003e\n  \u003cli\u003eCompatible with many consumer and professional washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC Adjustable Chemical Injector Kit is suited to homeowners, detailers, and small-to-medium contractors who want precise chemical application without altering their pump. If you use a pressure washer for automotive cleaning, siding, decks, or other routine maintenance and prefer adjustable dilution and corrosion-resistant fittings, this kit provides a low-cost, easy-to-install solution. Avoid using it with highly corrosive or pump-sensitive chemicals, and always follow detergent manufacturer guidance for downstream injection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the injector be used at high pressure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The injector introduces chemicals only when the washer runs at low pressure (about 250 PSI or less). High-pressure operation will not siphon chemical properly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your washer uses standard M22-14mm pump outlets and hoses, the YAMATIC kit fits. Check your machine’s connector type before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56831587352916,"sku":"B0BG2N3N3S","price":51.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-injector-front-view.jpg?v=1787017070"},{"product_id":"yamatic-flexible-pressure-washer-hose-30-ft-1-4-m22-14mm-female-kink-resistant-with-brass-fittings","title":"YAMATIC Flexible Pressure Washer Hose — 30 ft 1\/4\" M22-14mm Female, Kink-Resistant with Brass Fittings","description":"\u003cp\u003e\u003cstrong\u003eYAMATIC's 30 ft flexible pressure-washer hose is a 1\/4\" M22-14mm female replacement hose designed to deliver kink resistance, brass-reinforced connections, and a durable non-marking jacket for residential cleaning tasks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hose replaces stiffer factory lines and fits pressure washers that use the M22-14mm thread standard. Built for everyday home jobs—car washing, decks, fences, siding, and patios—it combines a low-memory hose body with upgraded fittings so you can pull, coil, and store it with less fuss. Note: this model is for 14mm (M22) systems only and will not fit 15mm systems like Sun Joe or AR Blue Clean.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose improve handling compared with stock hoses?\u003c\/h3\u003e\n\u003cp\u003eThe YAMATIC hose uses a low-memory 1\/4\" core that stays flexible after use, so it resists kinks and is easier to route around vehicles, corners, and furniture. Bend restrictors at each end and solid brass fittings reduce stress at connection points, prolonging service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-memory 1\/4\" hose body for easier coiling and pulling\u003c\/li\u003e\n  \u003cli\u003eReinforced bend restrictors to prevent premature wear\u003c\/li\u003e\n  \u003cli\u003eSolid brass M22-14mm female fittings for secure, leak-resistant attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pressure and temperature limits should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis hose is rated for 3,200 PSI working pressure and an 8,700 PSI burst pressure, making it suitable for household pressure-washing chores. It is designed for cold water use only with a maximum water temperature of 140°F.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3,200 PSI working pressure—sized for residential power washers\u003c\/li\u003e\n  \u003cli\u003e8,700 PSI burst pressure for safety margins under heavy use\u003c\/li\u003e\n  \u003cli\u003eCold-water use only; max 140°F to protect jacket and core\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hose fit my pressure washer and accessories?\u003c\/h3\u003e\n\u003cp\u003eThe connection is a standard M22-14mm female thread and is compatible with many gas and electric units from popular brands. Always verify your machine’s thread size—this hose is not compatible with 15mm systems such as Sun Joe or AR Blue Clean.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM22-14mm female connections—fits most M22-equipped washers\u003c\/li\u003e\n  \u003cli\u003eWorks with many Ryobi, Greenworks, Craftsman, Generac, Briggs \u0026amp; Stratton, and Westinghouse models\u003c\/li\u003e\n  \u003cli\u003eNot for 15mm-thread systems; check thread size before purchasing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the exterior protect surfaces and the hose itself?\u003c\/h3\u003e\n\u003cp\u003eThe outer jacket is abrasion-resistant and formulated to be non-marking so it minimizes scuff transfer when dragged across driveways, patios, and decks. The tougher cover also helps guard against everyday wear from rough surfaces and storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-marking outer jacket reduces scuffing on contact surfaces\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant cover improves longevity during routine use\u003c\/li\u003e\n  \u003cli\u003eCompact 30 ft length balances reach and manageable storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: homeowners and weekend DIYers who need a reliable replacement hose for routine residential pressure-washing tasks. It’s a practical upgrade if your factory hose is stiff, leaking at the connection, or prone to kinking. Choose this YAMATIC hose if your pressure washer uses the M22-14mm thread and you want easier handling, reinforced fittings, and a non-marking exterior for regular outdoor cleaning jobs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with Sun Joe or AR Blue Clean?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This YAMATIC hose is M22-14mm (14mm) and incompatible with 15mm systems like Sun Joe or AR Blue Clean.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure can this hose handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hose is rated for 3,200 PSI working pressure and an 8,700 PSI burst pressure, for typical residential use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56831690998100,"sku":"B0DNDQPHVW","price":69.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-30ft-m22-hose.jpg?v=1787018252"},{"product_id":"yamatic-adjustable-chemical-injector-kit-for-pressure-washer-3-8-quick-connect-downstream-soap-injector-4500-psi-stainless-br","title":"YAMATIC Adjustable Chemical Injector Kit for Pressure Washer — 3\/8\" Quick-Connect Downstream Soap Injector, 4500 PSI, Stainless\/Br","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Adjustable Chemical Injector Kit is a downstream soap injector that meters cleaning chemicals into a pressure washer at low pressure for controlled dilution and safer pump operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for homeowners and pros who need to apply detergents, degreasers, or sanitizers through a pressure washer, this kit fits 3\/8\" quick-connect outlets and works with gas or electric machines up to 4500 PSI. Built from stainless steel and brass components, the injector lets you fine-tune chemical feed with a metering valve while keeping concentrated solutions out of the pump. It includes a siphon hose and a soap spray nozzle sized for effective suction.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the injector feed chemicals without harming my pressure washer?\u003c\/h3\u003e\n\u003cp\u003eThe YAMATIC kit is a downstream design, so cleaning agents are introduced after the pump where pressure is reduced. That prevents corrosive or foaming chemicals from circulating through the pump internals and increases equipment longevity. The construction uses corrosion-resistant metals to withstand frequent use and a broad range of cleaning fluids.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstalls between the pump outlet and high-pressure hose using 3\/8\" quick connectors.\u003c\/li\u003e\n  \u003cli\u003eChemicals enter only at low-pressure operation (250 PSI or less), protecting pump seals.\u003c\/li\u003e\n  \u003cli\u003eBrass and stainless-steel parts resist chemical degradation for longer service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat control do I have over dilution and flow rate?\u003c\/h3\u003e\n\u003cp\u003eAn integrated metering valve gives precise control of the chemical-to-water ratio so you can tailor strength for different surfaces. The valve works across a water flow range of 2 to 5 GPM, letting you go from light rinses to heavier applications without changing equipment. Use the included large-orifice black soap nozzle to maintain the suction needed for consistent chemical feed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable dilution via the metering valve for small or concentrated doses.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2–5 GPM flow ranges to match most consumer and prosumer washers.\u003c\/li\u003e\n  \u003cli\u003eIncludes large-orifice soap nozzle to ensure proper suction and steady delivery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit work with my pressure washer model and temperature range?\u003c\/h3\u003e\n\u003cp\u003eThe injector is rated to a maximum working pressure of 4500 PSI and functions well with most gas-powered washers and many electric units. It handles water temperatures between 32°F and 122°F (0°C–50°C), so it covers common cold and warm-water cleaning tasks. Verify your machine’s outlet is 3\/8\" and that low-pressure chemical injection is supported for best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMax working pressure: 4500 PSI for broad compatibility with higher-power washers.\u003c\/li\u003e\n  \u003cli\u003eTemperature tolerance: 32°F–122°F for cold and warm-water applications.\u003c\/li\u003e\n  \u003cli\u003eStandard 3\/8\" quick-connect fittings for easy installation and compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and maintain the soap injector?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: connect the injector between your pump outlet and high-pressure hose using the supplied 3\/8\" quick connectors, attach the siphon tube to your chemical bottle, and select the soap nozzle. Routine maintenance is minimal — rinse the siphon and nozzle after use and inspect fittings for wear. Replacement parts are simple to source due to standard connection sizes and metal components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick-connect assembly fits standard 3\/8\" pressure-washer hookups for fast setup.\u003c\/li\u003e\n  \u003cli\u003eSimple rinsing after each use prevents buildup and prolongs service life.\u003c\/li\u003e\n  \u003cli\u003eDurable metal construction reduces frequency of part replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC Adjustable Chemical Injector Kit is aimed at DIY enthusiasts, professional cleaners, and fleet operators who need controlled chemical application without compromising pump health. It’s a good choice when you need adjustable dilution, compatibility with higher-pressure washers, and durable materials for frequent or heavy-duty cleaning tasks. If you plan to use concentrated cleaners, want flexible dosing, and have a 3\/8\" outlet on your pressure washer, this kit provides a reliable, serviceable solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the injector with hot water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the injector operates from 32°F to 122°F (0°C–50°C), suitable for most warm-water cleaning jobs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure is required for chemical feed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Chemicals are drawn at low pressure; injector works only when operating at 250 PSI or less for chemical application.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56831830262100,"sku":"B0FL1YLZNN","price":51.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-injector-front-assembly.jpg?v=1787020571"},{"product_id":"yamatic-25-ft-flexible-pressure-washer-hose-m22-14mm-female-kink-resistant-3200-psi","title":"YAMATIC 25 ft Flexible Pressure Washer Hose M22-14mm Female — Kink-Resistant, 3200 PSI","description":"\u003cb\u003eYAMATIC’s 25-foot flexible pressure washer hose with M22-14mm female fittings is a kink-resistant replacement hose built for residential pressure washers up to 3200 PSI.\u003c\/b\u003e\n\n\u003cp\u003eIf your original pressure washer hose is stiff, hard to stow, or has weak fittings, this 25-foot YAMATIC hose swaps in easily for many gas and electric models that use M22-14mm threads. It’s engineered with a low-memory 1\/4\" inner tube, upgraded brass connections, and an abrasion-resistant outer jacket designed for everyday outdoor cleaning tasks like cars, patios, fences, and siding. Before ordering, confirm your machine uses M22-14mm connections — this hose is not compatible with 15mm systems such as Sun Joe or Karcher.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this hose change routine cleaning and storage?\u003c\/h3\u003e\n\u003cp\u003eThe flexible low-memory body reduces kinks and makes the hose easier to pull around obstacles, coil, and store. That saves time and frustration during typical home cleaning jobs and reduces wear from forcing a stiff hose into tight spaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4\" inner hose for easier routing and handling\u003c\/li\u003e\n  \u003cli\u003eKink-resistant material to speed up setup and pack-up\u003c\/li\u003e\n  \u003cli\u003e25-foot length balances reach without excessive bulk\u003c\/li\u003e\n  \u003cli\u003eLightweight compared with many factory hoses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich pressure washers and connections is this hose compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis YAMATIC hose fits machines that use M22-14mm female fittings, including many popular consumer models. It’s suitable for most gas and electric residential pressure washers, but it does not fit 15mm-thread systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with brands using M22-14mm threads (Ryobi, Greenworks, Craftsman, Generac, and others)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 15mm systems like Sun Joe, Karcher, or AR Blue Clean\u003c\/li\u003e\n  \u003cli\u003eCheck your pressure washer’s manual or existing hose thread size before buying\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this hose durable enough for everyday home jobs and pressure requirements?\u003c\/h3\u003e\n\u003cp\u003eYes — the hose is rated for a 3200 PSI working pressure and an 8700 PSI burst pressure, which covers typical residential cleaning tasks. Reinforced fittings and bend restrictors strengthen the ends where most failures occur, and the outer jacket resists abrasion from hard surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3200 PSI working pressure for cars, decks, and siding\u003c\/li\u003e\n  \u003cli\u003e8700 PSI burst pressure offers a strong safety margin\u003c\/li\u003e\n  \u003cli\u003eBrass fittings and upgraded bend restrictors at hose ends\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant, non-marking jacket to protect surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat operating limits and care should I follow?\u003c\/h3\u003e\n\u003cp\u003eThe hose is designed for cold water use only with a maximum temperature of 140°F. Proper handling and winter storage will extend service life — avoid dragging across sharp edges and drain before storing in freezing conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum temperature: 140°F (cold-water use recommended)\u003c\/li\u003e\n  \u003cli\u003eDrain and store indoors during freezes to prevent damage\u003c\/li\u003e\n  \u003cli\u003eAvoid contact with sharp objects and chemical solvents\u003c\/li\u003e\n  \u003cli\u003eRinse and dry before storing to prevent debris buildup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Homeowners and DIYers who need a dependable, easy-to-handle replacement hose for M22-14mm pressure washers will benefit from the YAMATIC 25-foot flexible hose. It’s well suited for regular residential cleaning — cars, driveways, patios, fences, and siding — and for anyone who wants a lighter, kink-resistant alternative to stiff factory hoses. Confirm your thread size before purchase to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this hose fit my pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits machines with M22-14mm connections. Verify your washer’s thread size — not compatible with 15mm systems like Sun Joe or Karcher.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What PSI and temperature limits does the hose have?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Rated 3200 PSI working and 8700 PSI burst, for cold water use only up to 140°F.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56831853429076,"sku":"B0BHQC59R3","price":66.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-view-hose-and-fittings.jpg?v=1787020825"},{"product_id":"yamatic-3-4-brass-garden-hose-quick-connect-fittings-4-pack-stainless-lock-leak-resistant","title":"YAMATIC 3\/4\" Brass Garden Hose Quick Connect Fittings — 4-Pack, Stainless Lock \u0026 Leak-Resistant","description":"\u003cp\u003e\u003cstrong\u003eYAMATIC's 3\/4\" brass quick connect fittings are a four-piece kit that lets you snap garden hoses, sprayers and outdoor faucets together quickly and without leaks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese quick-connect adapters fit standard American SAE 3\/4\" garden hose threads and are built from high-purity brass with stainless steel locking balls and heavy-duty O-rings. The set is designed to speed up hose changes, cut down water loss at joints, and withstand frequent outdoor use. Below are concise answers to common buyer questions about compatibility, durability, leak prevention and installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill these connectors fit my garden hose and accessories?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the fittings are made for the SAE standard 3\/4\" garden hose thread used across most U.S. hoses, sprayers and faucet spigots. They are intended to work with a wide range of gardening tools when both sides share the same thread size.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with standard 3\/4\" garden hose thread (SAE).\u003c\/li\u003e\n  \u003cli\u003eWorks with hose wands, sprayers, sprinklers and outdoor faucets that use 3\/4\" threads.\u003c\/li\u003e\n  \u003cli\u003eDesigned for close fit using industry-grade O-rings to reduce gaps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these fittings prevent leaks and hold pressure?\u003c\/h3\u003e\n\n\u003cp\u003eThe connectors use a precision-machined brass body, stainless steel 4-ball locking and heavy-duty O-rings to create a tight seal and stable mechanical lock. That combination minimizes water escape at the joint and improves wear resistance compared with cheaper materials.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrecision process ensures accurate threads and mating surfaces.\u003c\/li\u003e\n  \u003cli\u003eFour stainless locking balls keep plugs and sockets securely engaged.\u003c\/li\u003e\n  \u003cli\u003eIndustry-grade O-rings form a leak-resistant seal under normal garden pressures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these fittings durable enough for frequent outdoor use?\u003c\/h3\u003e\n\n\u003cp\u003eThey are built from higher-purity industrial brass and corrosion-resistant stainless components to withstand outdoor conditions and repeated connections. The product is rated to hold high burst pressures and resist rust better than coated aluminum or low-grade brass.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-purity brass body for improved corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eStainless steel locking balls for long-lasting wear performance.\u003c\/li\u003e\n  \u003cli\u003eDesigned to handle heavy use and elevated burst pressures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and compatibility notes?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: thread the connector onto a hose or accessory and push the plug into the socket until the locking balls engage. For best sealing and fit, use YAMATIC plugs and sockets together rather than mixing brands.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHand-tighten or use a wrench carefully on the hex flats; avoid overtightening.\u003c\/li\u003e\n  \u003cli\u003ePush-to-connect action secures with the stainless 4-ball lock.\u003c\/li\u003e\n  \u003cli\u003eAvoid mixing with other-brand single plugs or sockets for optimal match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This four-pack suits gardeners, landscapers and homeowners who swap hoses and tools frequently and want a reliable, quick way to connect equipment with minimal leaks. It's a practical upgrade if you value durability, corrosion resistance and a snug, tool-free connection for standard 3\/4\" garden hose systems.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fittings fit all garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit standard American SAE 3\/4\" garden hose threads; ensure your hose uses 3\/4\" threads for compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix these with other brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They work best paired with YAMATIC plugs and sockets; mixing single parts from other brands may reduce seal quality.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56833121059156,"sku":"B094J29L3J","price":48.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-brass-quick-connect.jpg?v=1787037810"},{"product_id":"yamatic-pressure-washer-whip-hose-4-ft-3-8-swivel-connector-4000-psi-steel-braided-jumper","title":"YAMATIC Pressure Washer Whip Hose 4 ft — 3\/8\" Swivel Connector, 4000 PSI Steel-Braided Jumper","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC 4 ft Pressure Washer Whip Hose is a steel-braided, 3\/8\" swivel-connected jumper designed to link pumps, reels and surface cleaners at up to 4000 PSI.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty 4-foot whip hose from YAMATIC is built for gas-powered pressure washers and hose reels. It combines a steel wire braided core with a wear-resistant rubber jacket and USA-standard steel 3\/8\" male NPT fittings for improved rust resistance. The hose accepts hot and cold water between 35°F and 212°F (0°C–100°C) and ships with a 3\/8\" quick-connect plug to simplify hookup to 3\/8\" pump outlets.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this whip hose make hookup and reel use easier?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses a swivel-style connector on one end and a fixed connector on the other, allowing the hose to align without twisting and reducing kinks when it’s wound on a reel. A 3\/8\" quick-connect plug is included to let you couple the hose to common pump outlets fast, saving time during setup or changeover.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" swivel connector rotates to prevent hose torque.\u003c\/li\u003e\n  \u003cli\u003eFixed opposite end provides a secure pump or reel attachment.\u003c\/li\u003e\n  \u003cli\u003eIncluded 3\/8\" quick-connect plug for rapid connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pressure and temperature limits should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis jumper hose is rated for heavy commercial use with a working pressure up to 4000 PSI and a maximum rating cited at 4500 PSI. It tolerates water temperatures from 35°F to 212°F (0°C–100°C), making it suitable for cold-water rinses and most hot-water cleaning tasks within those limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: rated to 4000 PSI (4500 PSI max rating).\u003c\/li\u003e\n  \u003cli\u003eTemperature range: 35°F–212°F (0°C–100°C).\u003c\/li\u003e\n  \u003cli\u003eDesigned for gas-powered high-pressure cleaners and related equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich applications is the 4 ft length best suited for?\u003c\/h3\u003e\n\u003cp\u003eThe 4-foot whip hose is sized to serve as a short jumper between a pump and a hose reel or surface cleaner, and it fits in tight pump rooms and self-service carwash bays where longer hoses would tangle. YAMATIC also offers other lengths for different setups, but 4 ft is a common repair or replacement length for many reels and coil connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnector between pump and hose reel or heater coil outlets.\u003c\/li\u003e\n  \u003cli\u003eBypass\/unloader or surface cleaner replacement hose (4 ft \u0026amp; 5 ft options).\u003c\/li\u003e\n  \u003cli\u003eShort jumper hose for carwash bays and pump rooms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and fittings are used, and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses a steel wire braid under a durable rubber jacket to resist abrasion and maintain burst strength during frequent use. YAMATIC fits the hose with USA-standard steel 3\/8\" male NPT fittings that are more corrosion-resistant than plated aluminum, and the swivel end reduces stress on fittings during operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel wire braid for strength and flex endurance.\u003c\/li\u003e\n  \u003cli\u003eWear-resistant rubber jacket helps prevent scuffs and leaks.\u003c\/li\u003e\n  \u003cli\u003eSteel 3\/8\" male NPT fittings for improved rust resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, carwash operators, pressure-washer rental companies and serious homeowners who need a rugged short jumper between pumps, surface cleaners or hose reels. If you require a compact, high-pressure connection that tolerates hot water and frequent winding on a reel, the YAMATIC 4 ft whip hose is a practical replacement or upgrade that balances durability with easy hookup. For other lengths and accessory options, YAMATIC’s Power Center Store carries additional jumper hoses and connectors, and customer support is available around the clock for technical or fit questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with my 3\/8\" pump outlet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hose uses USA-standard 3\/8\" male NPT fittings and includes a 3\/8\" quick-connect plug for direct pump connections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it handle hot water from a pressure washer heater?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hose is rated for water temperatures from 35°F to 212°F (0°C–100°C), suitable for most hot-water applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56833154515284,"sku":"B0BHP2PPTV","price":48.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-4ft-whip-hose.jpg?v=1787038311"},{"product_id":"yamatic-pressure-washer-foam-cannon-gun-kit-short-4000-psi-foam-spray-with-brass-cannon-1l-bottle","title":"YAMATIC Pressure Washer Foam Cannon Gun Kit — Short 4000 PSI Foam Spray with Brass Cannon \u0026 1L Bottle","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Short Pressure Washer Gun with Foam Cannon is a compact, heavy‑duty foam spray kit that delivers up to 4000 PSI for fast, thick suds and professional‑level rinsing on cars, driveways, and outdoor surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all‑in‑one kit pairs a reinforced trigger gun with a solid‑brass foam cannon and a 1‑liter soap bottle, plus adapters to fit most electric and gas pressure washers. Designed for durability and maneuverability, the set includes a swivel inlet to prevent hose kinking, multiple spray tips for task flexibility, and simple controls to tune foam thickness and spray pattern. It is not intended for garden hoses or low‑pressure water sources.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit produce dense foam for cleaning vehicles?\u003c\/h3\u003e\n\u003cp\u003eThe foam cannon uses a stainless steel mixing core and an adjustable top knob to create thick, clinging suds that help lift dirt without aggressive scrubbing. Turn the top control to increase soap intake, and alter the front nozzle to change the spray fan for wider or narrower coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1‑liter (0.22 gal) container holds ample detergent for several cars.\u003c\/li\u003e\n  \u003cli\u003eStainless steel foam maker core for consistent foam generation.\u003c\/li\u003e\n  \u003cli\u003eTop knob for on‑the‑fly foam concentration adjustments.\u003c\/li\u003e\n  \u003cli\u003eFront nozzle adjusts spray angle from narrow jet to wide fan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this gun fit my pressure washer and hoses?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with M22‑14mm and M22‑15mm adapters to match common lance fittings and a 1\/4\" quick‑connect for fast attachment to the spray gun. A 3\/8\" female swivel inlet prevents twisting while under pressure so the hose can rotate freely without kinking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes M22‑14mm and M22‑15mm adapters for broad compatibility.\u003c\/li\u003e\n  \u003cli\u003e1\/4\" quick connector allows tool‑free foam cannon swap.\u003c\/li\u003e\n  \u003cli\u003e3\/8\" FNPT swivel inlet keeps the hose flexible during use.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with garden or standard water hoses—requires pressure washer outlet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the pressure washer gun for heavy use?\u003c\/h3\u003e\n\u003cp\u003eThe trigger gun is built from impact‑resistant materials and fitted with solid brass components at pressure‑bearing points for long service life. The foam cannon body is brass as well, chosen to withstand high pressures up to the kit's 4000 PSI rating while minimizing corrosion risk.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShockproof reinforced gun housing reduces damage from drops.\u003c\/li\u003e\n  \u003cli\u003eSolid brass fittings resist wear and high pressure loads.\u003c\/li\u003e\n  \u003cli\u003eFoam cannon brass body handles repeated heavy‑duty cycles.\u003c\/li\u003e\n  \u003cli\u003eRated maximum pressure: 4000 PSI for compatible washers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat cleaning tasks is this foam gun best suited for?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed for exterior cleaning jobs that benefit from activated detergent and pressure rinsing. It’s ideal for cars, trucks, siding, driveways, grills and patio furniture where foam helps break down grime before rinsing it away.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCar and truck exteriors—efficient pre‑wash foam application.\u003c\/li\u003e\n  \u003cli\u003eDriveways, sidewalks and patios—loosens ground‑in dirt.\u003c\/li\u003e\n  \u003cli\u003eHome siding and roof rinses where detergent is permitted.\u003c\/li\u003e\n  \u003cli\u003eOutdoor furniture and BBQ grills for gentle, effective cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: homeowners, hobby detailers and small‑business users who need a compact but robust foam cannon that connects quickly to popular pressure washers. If you want professional‑style foaming, a swivel inlet to reduce hose strain, and durable metal construction that tolerates regular use, this YAMATIC kit is built to deliver. Note: you will need a compatible pressure washer (not a garden hose) and appropriate cleaning solutions for best results; contact YAMATIC support for help matching accessories or troubleshooting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this foam cannon compatible with my pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your washer uses M22 fittings or accepts 1\/4\" quick connectors; adapters M22‑14mm and M22‑15mm are included. Not for garden hoses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What PSI can this foam gun handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit is rated up to 4000 PSI. Ensure your washer does not exceed this rating for safe operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56833905721684,"sku":"B0B515YG99","price":94.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-foam-cannon-front-view_4128de4c-39b8-4c40-b30c-7ce763081ec1.jpg?v=1787045468"},{"product_id":"yamatic-4000psi-short-pressure-washer-gun-1l-adjustable-foam-cannon-stainless-core-3-8-qc","title":"YAMATIC 4000PSI Short Pressure Washer Gun 1L Adjustable Foam Cannon, Stainless Core, 3\/8\" QC","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC 4000PSI Short Pressure Washer Gun with integrated 1L adjustable foam cannon is a compact, high-pressure spray gun designed to produce thick snow-foam for safe, efficient vehicle and surface cleaning.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact foam cannon kit pairs a sturdy, short-body pressure washer trigger with a high-density stainless-steel foam core and a 1-liter adjustable bottle to deliver rich foam at pressures up to 4000 PSI. Built for hobbyists and pros alike, it fits most gas and electric pressure washers with 3\/8\" quick-connect fittings (not compatible with garden hoses, faucets, Sun Joe, or AR Blue Clean models). The design emphasizes control, reduced wrist fatigue, and consistent foam production for safer, more efficient cleaning.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the foam cannon create dense, clinging foam?\u003c\/h3\u003e\n\u003cp\u003eThe YAMATIC cannon uses a high-density stainless-steel foam maker core that mixes soap and pressurized water to generate thick, long-lasting foam. The adjustable nozzle lets you change foam concentration and spray pattern for different cleaning tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless-steel foam core for stable foam quality and durability\u003c\/li\u003e\n  \u003cli\u003eAdjustable bottle and nozzle to tune soap concentration and spray angle\u003c\/li\u003e\n  \u003cli\u003e1L reservoir that holds enough solution for multiple cars or a single large wash\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/4\" quick plug improved for wear resistance and leak reduction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this gun attach to my pressure washer and hose setup?\u003c\/h3\u003e\n\u003cp\u003eThe gun is designed for 3\/8\" quick-connect pressure washer inlets and works with many popular brands of pressure washers. It is not compatible with garden hoses, faucet fittings, Sun Joe, or AR Blue Clean units, so check your machine's quick-connect size before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" quick connector inlet to prevent hose kinks and ensure a secure fit\u003c\/li\u003e\n  \u003cli\u003eCompatible with many gas and electric units like Briggs \u0026amp; Stratton, SIMPSON, and Honda\u003c\/li\u003e\n  \u003cli\u003eNot suitable for standard water hoses or incompatible brands listed in the product notes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow comfortable and durable is the trigger gun for longer cleaning sessions?\u003c\/h3\u003e\n\u003cp\u003eThe gun’s short, snub-nose body and shockproof handle reduce leverage and hand strain, while an easy-pull trigger lowers the effort required to spray. Lightweight construction plus an ergonomic grip makes it easier to maintain control during extended washes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLightweight trigger handle reduces hand fatigue during prolonged use\u003c\/li\u003e\n  \u003cli\u003eShockproof materials absorb impact and improve durability\u003c\/li\u003e\n  \u003cli\u003eCompact form factor improves maneuverability around bumpers and tight areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and precautions should I follow?\u003c\/h3\u003e\n\u003cp\u003eRinse the foam bottle and nozzle after each use to prevent soap buildup and clogging. Inspect the quick-connect fittings and the stainless-steel core periodically for wear, and store the gun dry to prolong seals and moving parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlush with clean water after every use to avoid residue and clogging\u003c\/li\u003e\n  \u003cli\u003eCheck quick-connect seals for wear to prevent leaks\u003c\/li\u003e\n  \u003cli\u003eStore indoors or in a dry area to protect O-rings and metal components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC 4000PSI Short Pressure Washer Gun Foam Cannon is ideal for car enthusiasts, detailers, and homeowners who want a compact, easy-to-use foam system that produces thick, safe snow-foam. It’s best for users with a compatible 3\/8\" quick-connect pressure washer who need a durable foam maker for routine vehicle washing, light-duty exterior cleaning, and anyone seeking quicker pre-soak coverage before rinsing or pressure washing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this foam cannon compatible with Sun Joe or garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It requires a 3\/8\" quick-connect pressure washer and is not compatible with garden hoses, faucets, Sun Joe, or AR Blue Clean models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much soap solution does the bottle hold?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The included bottle holds 1 liter of cleaning solution, enough for multiple car pre-washes or a single thorough wash.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56833940652372,"sku":"B0DCNR113J","price":94.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-view-pressure-washer-gun-foam-cannon.jpg?v=1787045670"},{"product_id":"yamatic-pressure-washer-hose-50-ft-1-4-m22-brass-3400-psi-anti-burst-pu-outer","title":"YAMATIC Pressure Washer Hose 50 ft 1\/4\" (M22 Brass) — 3400 PSI Anti-Burst, PU Outer","description":"\u003cp\u003e\u003cstrong\u003eYAMATIC's 50-foot, 1\/4\" anti-burst pressure washer hose is a heavy-duty replacement hose rated to 3400 PSI and fitted with solid brass M22 connectors for secure, leak-resistant cleaning power.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hose is built for homeowners and light-commercial users who need a dependable, long-lasting line for pressure washing tasks. It combines a wear-resistant polyurethane outer layer, braided reinforcement and anti-kink engineering to provide steady flow and extended service life. Reinforced connection points, a heat-resistant sleeve and a thickened M22 handle reduce the chance of damage in real-world use.\u003c\/p\u003e\n\n\u003ch3\u003eHow tough is this hose for regular pressure-washing jobs?\u003c\/h3\u003e\n\u003cp\u003eThe YAMATIC hose is designed to withstand frequent use and rough conditions without premature wear. Its upgraded PU outer layer offers significantly higher abrasion resistance than typical PVC, while the braided internal layer resists bulging and bursting under pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated working pressure: 3400 PSI for residential and light commercial tasks\u003c\/li\u003e\n  \u003cli\u003e50 ft length gives wider reach without constant re-plugging\u003c\/li\u003e\n  \u003cli\u003ePU outer skin resists scuffs, cuts and chemical exposure better than PVC\u003c\/li\u003e\n  \u003cli\u003eReinforced braid minimizes expansion or bubbling during use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the fittings hold up and avoid leaks?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses heavy-duty M22 brass connectors engineered for durability and repeat connections. Threads are precision-cut and include a robust rubber O-ring to create a tight seal with both electric and gas-powered pressure washers and accessories.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass M22 fittings reduce risk of cracking or corrosion\u003c\/li\u003e\n  \u003cli\u003eThickened handle on the female connector improves grip and impact resistance\u003c\/li\u003e\n  \u003cli\u003eDurable O-ring ensures a leak-resistant joint under high pressure\u003c\/li\u003e\n  \u003cli\u003eCompatible with common M22-equipped pressure washer guns and lances\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it prevent kinks, heat damage, and premature failure?\u003c\/h3\u003e\n\u003cp\u003eAnti-kink construction keeps the hose from twisting or collapsing so water flows consistently during cleaning. A heat-resistant protective sleeve shields the line from accidental contact with hot engines or mufflers, while industrial-grade bend restrictors at connectors reduce stress and leakage at high-wear points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti-kink design maintains steady water delivery and reduces clogs\u003c\/li\u003e\n  \u003cli\u003eProtective sleeve defends against heat and abrasion near power units\u003c\/li\u003e\n  \u003cli\u003eBend restrictors reinforce high-stress connection zones\u003c\/li\u003e\n  \u003cli\u003eEngineered to resist burst and wear across repeated jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this a suitable replacement for major brand hoses?\u003c\/h3\u003e\n\u003cp\u003eYes — the YAMATIC hose is sized and rated to replace many popular residential hoses. It was built to meet or exceed the performance needs of models from established brands, offering a durable alternative at a competitive value.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits most pressure washers using 1\/4\" lines with M22 connections\u003c\/li\u003e\n  \u003cli\u003eEngineered as a direct-fit replacement for several common models\u003c\/li\u003e\n  \u003cli\u003eDesigned for both electric and gas pressure washer systems\u003c\/li\u003e\n  \u003cli\u003e50 ft length reduces the need to reposition the washer frequently\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The YAMATIC 50 ft 1\/4\" anti-burst pressure washer hose is aimed at homeowners, property-maintenance pros and small contractors who need a reliable, abrasion-resistant line for patios, driveways, siding, vehicles and equipment. If you want a longer reach, fewer interruptions from kinks or leaks, and a hose built to hold up under routine pressure-washing conditions, this hose offers a balanced mix of durability, safety features and fitment compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure rating does this hose support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The YAMATIC 50 ft hose is rated for up to 3400 PSI, suitable for residential and light commercial cleaning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fittings work with my pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—solid brass M22 connectors fit most M22-equipped pressure washer guns and lances for both electric and gas units.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56834066710868,"sku":"B0DPV3WV7C","price":94.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-packaging-pressure-hose.jpg?v=1787046853"},{"product_id":"yamatic-pressure-washer-gun-wand-4000psi-m22-3-8-43-reach-360-swivel-5-nozzles","title":"YAMATIC Pressure Washer Gun Wand 4000PSI M22\/3\/8 43\" Reach — 360° Swivel \u0026 5 Nozzles","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC 4000PSI Pressure Washer Gun Wand is a heavy-duty, extendable pressure-washing lance with a 360° swivel inlet, M22\/Male and 3\/8\" quick-connect fittings, and a 43\" combined reach for demanding cleaning tasks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for homeowners and professionals who need extra reach, reliable fittings, and tangle-free operation, this gun wand assembly pairs with high-pressure washers (not a garden hose). Italian-engineered components and a reinforced anti-slip handle make the tool durable and comfortable for longer jobs around vehicles, siding, decks, roofs, and concrete.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this gun wand prevent hose kinks and improve maneuverability?\u003c\/h3\u003e\n\u003cp\u003eThe integrated 360° swivel inlet lets the attached high-pressure hose rotate freely, stopping twists and reducing strain on connections. That smoother movement cuts tugging and makes sweeping strokes more efficient when cleaning large surfaces.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360° rotating swivel inlet prevents hose tangles and wear\u003c\/li\u003e\n\u003cli\u003e3\/8\" swivel quick connector for secure, rapid hose attachment\u003c\/li\u003e\n\u003cli\u003eBalanced 43\" total length (21\" gun + 22\" extension) for reach without awkward angles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my pressure washer and nozzles?\u003c\/h3\u003e\n\u003cp\u003eThe assembly uses an M22 male coupler plus a 3\/8\" plug\/socket system that matches many consumer and prosumer pressure washers. YAMATIC supplies multiple adapter fittings and five spray tips so you can tailor spray patterns and attach to popular brands without guessing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with M22-threaded pumps and 3\/8\" high-pressure hoses\u003c\/li\u003e\n\u003cli\u003eIncludes M22-14mm male coupler and M22-to-1\/4\" socket adapter\u003c\/li\u003e\n\u003cli\u003eFive interchangeable spray nozzles for fan, cone, and pinpoint patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features improve comfort and long-term reliability?\u003c\/h3\u003e\n\u003cp\u003eThe gun body uses shockproof reinforced plastic ribbing for a secure grip and added impact resistance during heavy use. An easy-pull red trigger with a durable return spring and heat-dissipation vent reduces hand fatigue and holds up through repeated cycles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic anti-slip handle with reinforced ribs for grip and protection\u003c\/li\u003e\n\u003cli\u003eHigh-precision return spring and trigger tested for long life\u003c\/li\u003e\n\u003cli\u003eHeat-dissipating vents help maintain performance under higher temperatures (max 140°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow far and what surfaces can I reach with this wand?\u003c\/h3\u003e\n\u003cp\u003eWith a combined length of 43 inches (21\" gun plus 22\" extension), you'll access eaves, gutters, vehicle roofs, and other elevated or hard-to-reach areas without a ladder in many cases. The included nozzle set and sturdy lance make it suitable for cleaning vehicles, siding, decks, sidewalks, and more.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTotal reach: 43 inches for extended cleaning height and depth\u003c\/li\u003e\n\u003cli\u003eMax rated 4000 PSI and 140°F for high-pressure applications\u003c\/li\u003e\n\u003cli\u003eFive tips for different surfaces—gentle rinsing to concentrated cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC 4000PSI Pressure Washer Gun Wand is aimed at DIYers, detailers, and light-contractors who own a compatible high-pressure washer and want a reliable, tangle-free lance with extra reach. It’s not intended for use with garden hoses or non-high-pressure water lines; pair it only with rated pressure washers and hoses for safe, effective cleaning.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this gun compatible with my pressure washer brand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your pump or hose uses an M22 thread or 3\/8\" high-pressure hose; it matches many brands like SIMPSON, CRAFTSMAN, Ryobi, and more.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this with a normal garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — it must be paired with a high-pressure washer and hose. It is not designed for standard garden hoses.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56834074968404,"sku":"B0FB88S8G9","price":94.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-view-pressure-washer-gun.jpg?v=1787046919"},{"product_id":"yamatic-5800-psi-stainless-steel-short-pressure-washer-gun-3-8-swivel-one-finger-trigger","title":"YAMATIC 5800 PSI Stainless Steel Short Pressure Washer Gun — 3\/8\" Swivel \u0026 One-Finger Trigger","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC 5800 PSI stainless-steel short pressure washer gun is a heavy-duty replacement\/upgrade designed to deliver reliable high-pressure cleaning with a 360° anti-kink swivel and one-finger trigger control.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact pressure washer gun combines an all-304 stainless-steel fluid path, heat-resistant seals and a 3\/8\" quick-connect inlet to handle commercial-strength flow up to 5800 PSI and temperatures up to 300°F (150°C). Built for frequent use with high-pressure hoses and power washers, it replaces worn factory guns or upgrades to a more durable, easy-to-handle option that resists rust and deformation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this gun hold up to heavy-duty pressure washer use?\u003c\/h3\u003e\n\u003cp\u003eThe internal components and 1\/4\" outlet are machined from 304 stainless steel to resist corrosion and maintain precise fittings under high pressure. Heat-resistant seals and rugged construction let the gun operate with both hot and cold water flows without premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for real 5800 PSI working pressures.\u003c\/li\u003e\n  \u003cli\u003eCompatible with hot water up to 300°F (150°C).\u003c\/li\u003e\n  \u003cli\u003e304 stainless-steel fluid path prevents rust and maintains seal integrity.\u003c\/li\u003e\n  \u003cli\u003eDesigned for heavy-duty power washers and commercial applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this reduce hose tangles and make handling easier during long jobs?\u003c\/h3\u003e\n\u003cp\u003eThe integrated 360° swivel at the 3\/8\" quick-connect inlet allows the hose to rotate freely with movement, minimizing kinks and reducing torque transmitted to your wrist. A lightweight, shockproof handle and a short snub-nose design improve balance and maneuverability for extended tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti-kink swivel keeps hose flowing smoothly.\u003c\/li\u003e\n  \u003cli\u003eShort gun body improves reach in tight spaces and with foam cannons.\u003c\/li\u003e\n  \u003cli\u003eShockproof handle reduces vibrations during prolonged use.\u003c\/li\u003e\n  \u003cli\u003eErgonomic design for better trimming and reach control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the trigger comfortable for frequent or low-strength use?\u003c\/h3\u003e\n\u003cp\u003eThe one-finger pull trigger is engineered to cut trigger force by roughly 40%, making it significantly easier to operate than many standard guns. This lower activation force reduces hand fatigue and is helpful for users with limited grip strength or extended cleaning sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-finger operation for precise flow control.\u003c\/li\u003e\n  \u003cli\u003eReduced trigger force eases fatigue over long jobs.\u003c\/li\u003e\n  \u003cli\u003eTextured grip and contoured shape for secure hold.\u003c\/li\u003e\n  \u003cli\u003eUseful for foam-cannon work and detailed spot cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich pressure washers and accessories work with this gun?\u003c\/h3\u003e\n\u003cp\u003eThe YAMATIC short gun is compatible with many popular heavy-duty brands and models, and it was designed to serve as either a direct replacement or a premium upgrade. It must be paired with a high-pressure washer and hose—do not attach to a garden hose or non-pressure-rated fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with brands like SIMPSON, Dewalt, NorthStar, Mi-T-M, Predator and others.\u003c\/li\u003e\n  \u003cli\u003eFits standard 3\/8\" quick-connect high-pressure inlets.\u003c\/li\u003e\n  \u003cli\u003ePairs with foam cannons, turbo nozzles and other pressure-washer accessories.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for garden hoses or low-pressure water sources.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The YAMATIC 5800 PSI stainless-steel short pressure washer gun is aimed at professionals, fleet maintenance crews and serious DIYers who need a compact, corrosion-resistant handle that tolerates hot water and heavy flow. Choose this gun if you want a durable replacement that reduces hose kinks, eases trigger fatigue and integrates with commercial-grade power washers and accessories.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this gun handle hot water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s rated for hot water up to 300°F (150°C) with heat-resistant seals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it fit my power washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many heavy-duty machines with a 3\/8\" quick-connect inlet; confirm compatibility with your model.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56834178449748,"sku":"B0D91JMCZ5","price":89.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-view-pressure-gun.jpg?v=1787047761"},{"product_id":"yamatic-pressure-washer-gun-wand-kit-4000-psi-40-extension-5-nozzles-adapters","title":"YAMATIC Pressure Washer Gun \u0026 Wand Kit 4000 PSI — 40\" Extension, 5 Nozzles \u0026 Adapters","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Pressure Washer Gun and Wand Kit is a heavy-duty 4000 PSI cleaning gun with two extension wands that extend up to 40 inches and a full set of adapters and nozzles for wide vehicle, home, and commercial cleaning tasks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete kit pairs a high-pressure gun with interchangeable wands, five nozzle tips, and multiple adapters so you can quickly convert popular M22 and 3\/8\" quick-connect systems for tougher wash jobs. It’s designed to work with pressure washers that accept M22‑14mm, M22‑15mm, or 3\/8\" quick-connect hoses — not a garden hose. The kit aims to improve reach and control for car detailing, house siding, roofs, windows, driveways, and other high-pressure cleaning applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 40\" extension improve cleaning access?\u003c\/h3\u003e\n\u003cp\u003eThe included two-piece extension system lets you switch between three effective lengths, providing close control for detailing and extended reach for high or awkward areas. Locking connections keep the wand steady under pressure while you work, so you get the power of your pressure washer in places you otherwise couldn’t reach safely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo detachable extension wands combine to reach up to 40 inches for roofs and high windows.\u003c\/li\u003e\n  \u003cli\u003eShorter configurations allow precise control for automotive and patio cleaning.\u003c\/li\u003e\n  \u003cli\u003eSecure threaded and quick-connect joins to resist wobble under high pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich pressure washers and hoses does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe YAMATIC gun and wand kit is built for common high-pressure connections rather than garden hoses. It supports M22-14mm, M22-15mm, and 3\/8\" quick-connect fittings, which are standard on many consumer and professional pressure washers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with M22 and 3\/8\" quick-connect pressure washer hoses.\u003c\/li\u003e\n  \u003cli\u003eWorks with brands using standard M22 fittings such as Ryobi, Simpson, Craftsman, Greenworks, Troy-Bilt, and Honda.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for direct connection to garden or faucet water hoses (3\/4\" garden hose).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat spray patterns and accessories are included for different jobs?\u003c\/h3\u003e\n\u003cp\u003eThe kit comes with five quick-change nozzle tips that provide a range of spray angles and pressures so you can switch from broad rinses to concentrated cleaning. A tip holder keeps the nozzles organized and within reach during a job, while included adapters let you match the kit to various pressure hose standards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFive nozzle tips for multiple spray patterns — wide rinse to focused jet.\u003c\/li\u003e\n  \u003cli\u003eNozzle tip holder for quick swaps and convenient storage during work.\u003c\/li\u003e\n  \u003cli\u003eThree connection adapters included to bridge common quick-connect sizes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the gun for heavy-duty use?\u003c\/h3\u003e\n\u003cp\u003eThe gun is rated for up to 4000 PSI and built for repeated use with high-pressure systems. Robust materials and secure connecting hardware minimize leaks and wear, while the design prioritizes user control and stability under pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum working pressure up to 4000 PSI for demanding tasks.\u003c\/li\u003e\n  \u003cli\u003eSturdy construction and leak-resistant fittings for long-term use.\u003c\/li\u003e\n  \u003cli\u003eErgonomic grip and trigger control for safer handling during prolonged jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The YAMATIC Pressure Washer Gun and Wand Kit suits homeowners and professionals who already own a compatible high-pressure washer and need greater reach, faster nozzle changes, and a versatile set of adapters. It’s especially useful for auto detailers, property maintenance crews, and DIYers tackling siding, gutters, roofs, windows, driveways, and other elevated or hard-to-reach surfaces. If you plan to connect to a garden faucet or standard household hose, this kit is not suitable — it must be used with a proper high-pressure hose and washer system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this gun compatible with my Ryobi pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits pressure washers using M22 or 3\/8\" quick-connect hoses commonly found on many Ryobi models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I attach this directly to a garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — this kit requires a high-pressure hose and is not suitable for standard garden or faucet hoses.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56834430763348,"sku":"B0H1HPK394","price":106.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-pressure-washer-gun-front-view_08ab3504-77ed-426a-bcaf-a65e7b501e56.jpg?v=1787050287"},{"product_id":"yamatic-short-pressure-washer-gun-with-25ft-flexible-3-8in-hose-m22-14-stubby-compact-gun-360-swivel-4000-psi","title":"YAMATIC Short Pressure Washer Gun with 25ft Flexible 3\/8in Hose M22-14 — Stubby Compact Gun, 360° Swivel, 4000 PSI","description":"\u003cp\u003e\u003cstrong\u003eYAMATIC short pressure washer gun paired with a 25 ft flexible 3\/8\" hose delivers compact, kink-resistant cleaning power for tight spaces and commercial use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for detail work and heavy-duty cleaning alike, this kit combines a stubby, easy-pull trigger gun with robust brass and steel internals and a highly flexible green hose engineered to resist kinks and wear. The assembly fits common high-pressure washers (M22-14 compatible) and is rated for up to 4000 PSI and 140°F, giving you reliable performance on cars, patios, equipment, and more while staying compact enough for close-up or confined tasks.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the swivel inlet improve handling?\u003c\/h3\u003e\n\n\u003cp\u003eThe gun’s 360° swivel 3\/8\" quick-connect inlet lets the hose rotate freely under pressure, reducing twists and preventing kinks during continuous use. This keeps water flowing smoothly and reduces strain on your wrist and fittings so you can work longer without stopping to untangle the hose.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e360° swivel prevents hose twisting and torsion\u003c\/li\u003e\n  \u003cli\u003eQuick-connect 3\/8\" fittings for fast attachment\u003c\/li\u003e\n  \u003cli\u003eMaintains consistent water flow under pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the stubby trigger gun easier to use in tight spots?\u003c\/h3\u003e\n\n\u003cp\u003eThe short, snub-nose design allows one-handed control and better maneuverability around corners, wheel wells, and undercarriages. A reinforced, shockproof housing and ceramic trigger reduce vibration and give a solid, long-lasting pull feel for repetitive tasks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompact profile for confined areas\u003c\/li\u003e\n  \u003cli\u003eEasy-pull trigger with low vibration\u003c\/li\u003e\n  \u003cli\u003eSolid brass internal components for durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and leak-resistant is the kit?\u003c\/h3\u003e\n\n\u003cp\u003eYAMATIC uses steel and brass fittings combined with Teflon tape and thread locker to minimize leaks and increase service life. The hose material is upgraded for wear resistance and a small bend radius, providing strength and flexibility that holds up to commercial environments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrass internal trigger and steel connectors\u003c\/li\u003e\n  \u003cli\u003eTeflon and lock-tite included to seal threads\u003c\/li\u003e\n  \u003cli\u003eHose rated at 3200 PSI with improved abrasion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich machines and jobs is this kit compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThis assembly fits many common high-pressure washer brands and models using M22-14 connections, including Simpson, CRAFTSMAN, Champion, Honda, Excell, and Ryobi. It’s built for outdoor cleaning, detailing, and light commercial washing—note it is not designed for garden or standard water hoses.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eM22-14 compatibility with popular washer brands\u003c\/li\u003e\n  \u003cli\u003e4000 PSI gun rating and 3200 PSI hose rating\u003c\/li\u003e\n  \u003cli\u003eNot compatible with garden\/water-only hoses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC short pressure washer gun and 25 ft flexible hose kit is aimed at professionals and serious DIYers who need a compact, durable solution for tight or repetitive washing tasks. Choose this kit if you value one-handed control in confined areas, require kink-resistant hose performance, and need a compatible upgrade for M22-equipped pressure washers used on vehicles, decks, equipment, and small commercial jobs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my M22 pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the gun and hose use M22-14 compatible fittings and work with many popular brands that use that connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the hose safe for hot water use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit’s gun is rated to 140°F; check your washer and hose specifications to confirm safe hot-water operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56834819326292,"sku":"B0CZK6XSZL","price":99.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-short-gun-front-view_9a46de42-ee79-4990-8715-2cd5def15746.jpg?v=1787053935"},{"product_id":"yamatic-pressure-washer-pump-3400-psi-2-5-gpm-horizontal-3-4-shaft-stainless-pistons","title":"YAMATIC Pressure Washer Pump 3400 PSI 2.5 GPM — Horizontal 3\/4\" Shaft, Stainless Pistons","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Horizontal 3\/4\" Shaft Pressure Washer Pump delivers up to 3400 PSI at 2.5 GPM as a direct, easy-to-install replacement for many small gas-powered washers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis horizontal-mount pump is built to revive a worn power washer without the expense of replacing the whole unit. Designed for small horizontal engines with a 3\/4\" keyed shaft, the unit includes stainless-steel pistons, an integrated adjustable unloader, and a thermal relief valve to protect the pump during bypass operation. It comes pre-filled with oil and uses a familiar SAE bolt pattern to fit many popular consumer brands.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and models will this pump fit?\u003c\/h3\u003e\n\u003cp\u003eThis pump follows a USA standard horizontal mounting pattern and works with many 180–225 cc (roughly 6.5–7 hp) small engines. It’s intended for pumps with a 3\/4\" keyed shaft and the same inlet\/outlet orientation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Honda GC190 and GC160 (3\/4\" keyway) and GX160 equivalents.\u003c\/li\u003e\n  \u003cli\u003eReplaces select Simpson part numbers (MSH3125, MS60753, MS60788, MS60850, MS60799, MS61043).\u003c\/li\u003e\n  \u003cli\u003eWorks with Homelite models and Karcher G3050OH, K2400HH, G2400HH lines where orientations match.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 7\/8\" shafts, SRMW footprints, or units with shrouds blocking the mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the pump protect itself and extend service life?\u003c\/h3\u003e\n\u003cp\u003eThe pump uses a double-seal design, stainless steel pistons, and an integrated thermal relief valve (TRV) to reduce wear and protect components during bypass. These features together target a longer working life compared with many original-equipment consumer pumps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless-steel pistons increase seal durability and reduce wear.\u003c\/li\u003e\n  \u003cli\u003eDouble-seal and upgraded bearings lower leak and failure risk.\u003c\/li\u003e\n  \u003cli\u003eThermal relief valve prevents overheating during extended bypass operation.\u003c\/li\u003e\n  \u003cli\u003eEstimated service life up to about 150 hours under typical consumer use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat adjustment and maintenance controls are available?\u003c\/h3\u003e\n\u003cp\u003eThe pump includes an adjustable unloader valve allowing you to fine-tune pressure to match your engine’s capabilities and cleaning needs. It ships pre-filled with oil and features an easy-start design, but routine maintenance still improves longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable unloader lets you raise or lower operating pressure safely.\u003c\/li\u003e\n  \u003cli\u003ePre-filled oil—no initial oil change required before first run.\u003c\/li\u003e\n  \u003cli\u003eRecommend draining water and using pump protectant before long storage.\u003c\/li\u003e\n  \u003cli\u003eEasy-start structure eases pull-start effort on cold or tired engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: If your gas pressure washer has a horizontal engine with a 3\/4\" keyed shaft and the same mounting orientation, this YAMATIC pump is a cost-effective upgrade to restore high pressure and flow. It’s intended for homeowners, rental shops, and small contractors who want to replace a failed pump on popular consumer models (Honda, Simpson, Homelite, Karcher, Troy-Bilt and similar). Always confirm shaft size, bolt pattern, and inlet\/outlet alignment before purchasing to ensure correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pump compatible with a Honda GC190 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—compatible when your GC190 has a 3\/4\" keyed shaft and matching inlet\/outlet orientation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the pump arrive with oil already filled?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the pump is pre-filled with oil, so no initial oil change is required before first use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56835430580564,"sku":"B07KMY34ZZ","price":114.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-view-pump.jpg?v=1787056629"},{"product_id":"yamatic-pressure-washer-hose-100-ft-1-4-in-m22-14mm-female-flexible-low-memory-brass-fittings-3-200-psi","title":"YAMATIC Pressure Washer Hose 100 ft 1\/4 in M22-14mm Female — Flexible Low-Memory, Brass Fittings, 3,200 PSI","description":"\u003cstrong\u003eA 100-foot, low-memory 1\/4\" pressure-washer hose with M22-14mm fittings, reinforced joints, non-marking jacket and included quick-connect kit for easy, durable replacements.\u003c\/strong\u003e\n\n\u003cp\u003eIf your pressure-washer hose tangles, kinks or wears out where it connects, the YAMATIC Flexible Pressure Washer Hose solves those hassles with a long, easy-to-handle replacement built for common gas and electric machines. It balances a pliable cover that lies flat with a rugged internal core and upgraded end fittings so you can reach around cars, equipment and landscaping without wrestling the line. The hose suits most standard M22-14mm-threaded pumps and guns—check your machine’s connection before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hose fit my pressure washer?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses standard M22-14mm female fittings, compatible with many popular brands that accept that thread size. It will not fit models that require a 15mm inner pin, such as Sun Joe, Karcher or AR Blue. Always confirm the thread spec on your pump or spray gun before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Ryobi, Greenworks, Troy-Bilt, Craftsman, Simpson, Honda and similar M22-14mm systems\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 15mm-pin systems like Sun Joe and Karcher\u003c\/li\u003e\n  \u003cli\u003eIncludes adapter pieces to convert to 3\/8\" quick-connect fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the hose handle flexibility and storage?\u003c\/h3\u003e\n\u003cp\u003eYAMATIC engineered a low-memory polymer for the 1\/4\" inner line so the hose lays flat while you work and coils back without stubborn kinks. The 100-foot length increases reach around vehicles and garden beds while still coiling compactly for storage on a reel or rack.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-memory material prevents curls and holds a flat working profile\u003c\/li\u003e\n  \u003cli\u003eLong 100-foot reach for large driveways and property perimeters\u003c\/li\u003e\n  \u003cli\u003eCoils easily for tidy storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the ends and jacket more durable?\u003c\/h3\u003e\n\u003cp\u003eCommon breakage happens near the connection points; this hose uses heavy-duty bend restrictors and sturdy brass fittings to reduce stress at those vulnerable spots. The outer cover is non-marking and abrasion-resistant, so dragging the hose over concrete, brick or gravel won’t quickly abrade the jacket or leave visible scuffs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced bend protectors reduce joint strain and extend service life\u003c\/li\u003e\n  \u003cli\u003eSolid brass M22-14mm fittings resist corrosion and maintain thread integrity\u003c\/li\u003e\n  \u003cli\u003eNon-marking, abrasion-resistant outer jacket protects surfaces and hides wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and safety specs should I know?\u003c\/h3\u003e\n\u003cp\u003eThe hose is built for demanding residential tasks, rated to a working pressure of 3,200 PSI with a reinforced core and an 8,700 PSI burst strength for safety margins. It’s designed for cold-water use up to 140°F; avoid contact with hot engine parts that could melt the cover.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated working pressure: 3,200 PSI; burst rating: 8,700 PSI\u003c\/li\u003e\n  \u003cli\u003eTemperature limit for cold-water applications up to 140°F\u003c\/li\u003e\n  \u003cli\u003eIncludes adapter kit: M22-14mm to 3\/8\" quick connects and a male-to-male coupler\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The YAMATIC 100FT Flexible Pressure Washer Hose is ideal for homeowners, detailers and small contractors who need extra reach and a tangle-free line for washing cars, patios, siding or equipment. Choose this hose if you want easier handling, fewer connection failures and the convenience of quick-connect adapters—just confirm your machine uses M22-14mm threads before installing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hose fit Sun Joe or Karcher pressure washers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This hose uses M22-14mm fittings and will not fit Sun Joe or Karcher models that require a 15mm inner pin.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are quick-connect adapters included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes M22-14mm to 3\/8\" quick connects and a male-to-male coupler for easy conversions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56835449782612,"sku":"B0DNSSXDTV","price":118.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-view-hose-coiled_0db31d17-5fe4-4895-a374-50199b2c5d4b.jpg?v=1787056703"},{"product_id":"yamatic-3-8-in-pressure-washer-hose-50-ft-4000-psi-steel-braided-with-360-brass-swivel","title":"YAMATIC 3\/8 in Pressure Washer Hose 50 ft - 4000 PSI Steel-Braided with 360° Brass Swivel","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC 3\/8-inch pressure washer hose is a 50-foot, 4000 PSI-rated replacement hose with a 360° swivel socket and durable steel-braided construction for hot or cold-water cleaning.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace damaged or undersized pressure washer lines with this heavy-duty YAMATIC hose designed for everyday residential and light-commercial tasks. It pairs with common 3\/8\" quick-connect systems used by brands like Simpson, DeWalt, Generac, Rigid, MTM, Champion, and Powerstock. Built to resist kinking and abrasion, this hose gives you more reach and smoother handling when washing vehicles, patios, siding, or equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 360° swivel improve handling?\u003c\/h3\u003e\n\n\u003cp\u003eThe integrated brass swivel socket rotates freely to prevent the hose from twisting as you move the spray gun. This reduces tension at the connection point and keeps the line following your motion, making long cleaning sessions less fatiguing. The swivel also helps preserve the hose and fittings, cutting down on premature wear.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrass swivel socket allows continuous rotation during use\u003c\/li\u003e\n  \u003cli\u003ePrevents hose kinks and tangles for consistent spray flow\u003c\/li\u003e\n  \u003cli\u003eReduces stress on plug and gun connections for longer life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hose survive hot-water pressure washing?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the hose is rated for operating temperatures from 15°F up to 212°F, so it works with both cold and hot-water cleaning setups. The rubber cover resists wear from dragging and routing, while the inner high-tensile steel-wire braid maintains shape and pressure integrity under heat. Use it for tasks like degreasing equipment or removing stubborn stains where elevated water temperature helps performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTemperature range: 15°F to 212°F for hot-or-cold cleaning\u003c\/li\u003e\n  \u003cli\u003eSteel-wire braid supports repeated thermal and mechanical stress\u003c\/li\u003e\n  \u003cli\u003eWear-resistant outer rubber protects against abrasion and scuffs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this hose compatible with my current pressure washer?\u003c\/h3\u003e\n\n\u003cp\u003eThe hose uses standard 3\/8\" quick-connect fittings: a steel plug and a brass swivel socket that mate with most 3\/8\" QC systems. It’s intended as a direct upgrade or replacement for many popular consumer and prosumer pressure washers. Verify your machine uses 3\/8\" QC hardware to ensure a proper fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits 3\/8\" quick-connect systems used by major brands\u003c\/li\u003e\n  \u003cli\u003eSteel plug for secure connection and brass swivel for durability\u003c\/li\u003e\n  \u003cli\u003eIdeal for replacing worn OEM hoses or adding length to your setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the hose under pressure?\u003c\/h3\u003e\n\n\u003cp\u003eConstructed with high-tensile steel-wire braid, the hose supports a 4000 PSI working pressure and a 12,000 PSI burst rating for safety margins. The reinforced build resists deformation under heavy use, and the outer rubber jacket protects against cuts and scuffs encountered when moving around driveways and equipment. Normal care and avoiding sharp edges will extend service life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRated working pressure: 4000 PSI\u003c\/li\u003e\n  \u003cli\u003eBurst pressure rating: 12,000 PSI for added safety margin\u003c\/li\u003e\n  \u003cli\u003eReinforced rubber cover minimizes wear from dragging and routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Homeowners and small business operators who need reliable reach and long-lasting performance from their pressure washer will find this hose a practical replacement. It suits vehicle detailing, patio and driveway cleanup, light equipment maintenance, and any cleaning where a kink-resistant, hot-water compatible hose improves efficiency. Choose the 50-foot length when you want a balance between mobility and manageability without excess bulk.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hose fit my 3\/8\" quick-connect pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It uses a standard 3\/8\" steel plug and brass swivel socket compatible with most 3\/8\" QC systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use hot water through this hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hose supports temperatures from 15°F to 212°F for hot- and cold-water cleaning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56835506110804,"sku":"B07HLMX7BN","price":121.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-connector-and-plug.jpg?v=1787057331"},{"product_id":"yamatic-pressure-washer-hose-50-ft-3-8-quick-connect-4000-psi-steel-wire-braided-heat-resistant","title":"YAMATIC pressure washer hose 50 ft — 3\/8\" quick-connect, 4000 PSI, steel-wire braided, heat-resistant","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Pressure Washer Hose 50 FT is a heavy-duty, steel-wire braided replacement\/extension hose rated for 4000 PSI that fits common 3\/8\" quick-connect power washers and handles water up to 212°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to extend your cleaning reach without sacrificing durability, this 50-foot hose combines an abrasion-resistant rubber outer cover with a tensile steel-wire braid to resist wear on rough surfaces like concrete and brick. It accepts 3\/8\" quick connects and includes M22-14mm adapters to pair with many gas-powered power washer brands. A 360° swivel quick-connect reduces tangles, while the heat-tolerant inner tube lets you use hot water for tougher grime.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable is the hose for frequent outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe hose is engineered for demanding residential and light-commercial tasks. The steel-wire braid increases tensile strength and resists stretching or bursting, while the abrasion-resistant rubber cover protects against scrapes and cuts during use on rough surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4000 PSI working pressure with 12000 PSI burst rating for safety margin\u003c\/li\u003e\n  \u003cli\u003eSteel-wire braided reinforcement for high tensile strength\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant rubber cover to reduce surface damage\u003c\/li\u003e\n  \u003cli\u003eRated for repeated use on concrete, patios, and siding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hose fit my power washer and accessories?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses standard 3\/8\" quick-connect fittings and ships with two M22-14mm adapters to broaden compatibility. It is designed to work as an extension or replacement on many popular gas-powered washer brands, but it is not intended for garden hose connections or household faucets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" quick-connect fittings for common wand and gun attachments\u003c\/li\u003e\n  \u003cli\u003eIncludes two M22-14mm adapters for gas washer compatibility\u003c\/li\u003e\n  \u003cli\u003eCompatible with Honda, Simpson, DeWalt, Rigid, Champion, Craftsman, MTM, Troy-Bilt and similar units\u003c\/li\u003e\n  \u003cli\u003eNot suitable for standard garden hose spigots or low-pressure uses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the swivel control affect handling and storage?\u003c\/h3\u003e\n\u003cp\u003eA 360° swivel quick-connect rotates with the hose, cutting down on kinks and twisting during cleaning passes. That smoother movement makes it easier to work around vehicles, decks, and awkward corners while reducing strain on connection points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwivel reduces tangling when you walk or circle around objects\u003c\/li\u003e\n  \u003cli\u003eHelps prevent kink points that shorten hose life\u003c\/li\u003e\n  \u003cli\u003eMakes repositioning quicker and less physically demanding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use hot water with this hose and what temperatures are safe?\u003c\/h3\u003e\n\u003cp\u003eThe inner rubber tube is rated to handle both cold and hot water up to 212°F, so it supports high-temperature cleaning when needed for grease and heavy soils. Always confirm your power washer’s hot-water compatibility and follow manufacturer guidelines to avoid damaging internal seals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner tube rated to 212°F for hot-water cleaning tasks\u003c\/li\u003e\n  \u003cli\u003eSuitable for temperature-assisted cleaning of oil, grease, and baked-on dirt\u003c\/li\u003e\n  \u003cli\u003eCheck power washer compatibility before using continuous high temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC 50 FT Pressure Washer Hose fits homeowners and maintenance professionals who need a long, robust hose for regular exterior cleaning—driveways, siding, fences, patios, and fleet or vehicle washing. It’s ideal if you want extended reach without moving the machine, require hot-water capability, and need fittings compatible with common gas-powered power washers. If you’re connecting to a garden spigot or low-pressure system, choose a hose designed for those applications instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with my power washer model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your washer uses 3\/8\" quick-connect fittings; two M22-14mm adapters are included for broader gas unit compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this hose with hot water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the inner tube supports hot water up to 212°F, but confirm your washer permits hot-water operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56835845980500,"sku":"B0C39YRJPH","price":118.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-hose-full-length-front.jpg?v=1787057926"},{"product_id":"yamatic-turbo-nozzle-rotating-pressure-washer-tip-3600-psi-4000-psi-peak-4-0-gpm-solid-brass","title":"YAMATIC Turbo Nozzle Rotating Pressure Washer Tip — 3600 PSI (4000 PSI Peak), 4.0 GPM, Solid Brass","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Turbo Nozzle Pressure Washer is a heavy-duty rotating turbo tip that delivers a pinpoint oscillating jet for faster, deeper cleaning on concrete, brick, metal and more.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for professionals and serious DIYers, this turbo nozzle combines a ceramic ball, oversized bearing and solid brass construction to transform a pressure washer’s raw power into a concentrated, rotating stream that strips grime more efficiently than standard fixed tips. It’s rated 3600 PSI (works up to 4000 PSI peak) and flows 4.0 GPM, and is designed for hot-or-cold-water use up to 311°F (155°C).\u003c\/p\u003e\n\n\u003ch3\u003eHow does the rotating turbo tip improve cleaning speed and results?\u003c\/h3\u003e\n\u003cp\u003eThe rotating pinpoint stream focuses water into a fast, oscillating jet that penetrates stubborn dirt while covering more surface area per pass. That concentrated motion reduces the number of passes required and helps remove deep-seated grime, paint overspray, mildew and compacted mud.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRotating ceramic ball for sustained high-speed jet action\u003c\/li\u003e\n  \u003cli\u003eOversized bearing ensures smooth rotation at high pressure\u003c\/li\u003e\n  \u003cli\u003eDelivers up to 5x more cleaning efficiency than many traditional tips\u003c\/li\u003e\n  \u003cli\u003eEffective on concrete, brick, metal, wood exteriors and heavy equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction and materials make this nozzle durable?\u003c\/h3\u003e\n\u003cp\u003eYAMATIC engineered this turbo nozzle with premium solid brass components and a hot-dip galvanized 1\/4\" quick connector to resist corrosion in demanding environments. The ceramic ball and wear-resistant internals stand up to abrasive contaminants and frequent use, extending service life over cheaper metal-only designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body for strength and long-term reliability\u003c\/li\u003e\n  \u003cli\u003eHot-dip galvanized quick connector doubles corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eCeramic internal ball resists wear from grit and high flow\u003c\/li\u003e\n  \u003cli\u003ePrecision bearings reduce wobble and premature wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this nozzle fit my pressure washer and when should I use it?\u003c\/h3\u003e\n\u003cp\u003eThe nozzle uses a 1\/4\" quick connector compatible with most standard consumer and commercial pressure wand fittings; it’s intended as a universal-style turbo tip replacement for many popular brands. Use it when surfaces are heavily soiled, when you need paint or gum removal, or when cleaning equipment and driveways where concentrated energy matters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for up to 3600 PSI continuous; 4000 PSI peak and 4.0 GPM flow\u003c\/li\u003e\n  \u003cli\u003eSuitable for hot or cold water up to 311°F \/ 155°C\u003c\/li\u003e\n  \u003cli\u003eWorks as a commercial replacement for many major brands\u003c\/li\u003e\n  \u003cli\u003eBest for stubborn grime, stripping, and heavy-duty surface prep\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain the turbo nozzle for long life?\u003c\/h3\u003e\n\u003cp\u003eRegularly flush the nozzle with clean water after use to remove sand and debris, and inspect the connector and bearing for wear. Store it in a dry place; occasional lubrication of threaded parts and checking seals will keep performance consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlush with clean water after each job to remove grit\u003c\/li\u003e\n  \u003cli\u003eInspect quick connector and seals for wear or leaks\u003c\/li\u003e\n  \u003cli\u003eAvoid dropping or striking the ceramic components\u003c\/li\u003e\n  \u003cli\u003eStore dry and protected from corrosive environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC Turbo Nozzle is for contractors, fleet maintenance teams, property managers and homeowners who routinely tackle heavy-duty cleaning—driveways, decks, construction equipment, boats and exterior paint prep. If you need faster removal of baked-on dirt, grease or paint with a nozzle built for frequent use and hot-water compatibility, this turbo tip is a practical upgrade to standard pressure washer spray tips. YAMATIC also offers 24\/7 customer service for fit questions or technical support and lists additional pressure washer accessories in the YAMATIC Power Center Store.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this turbo nozzle compatible with my pressure washer wand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses a 1\/4\" hot-dip galvanized quick connector that fits most standard wands and many common brands; check your wand’s connector size to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this nozzle handle hot water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—rated for hot-or-cold use up to 311°F (155°C), suitable for applications that require elevated water temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56836528570708,"sku":"B07L8RCCJF","price":89.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-turbo-nozzle-front-view.jpg?v=1787058362"},{"product_id":"yamatic-pressure-washer-pump-3000-psi-2-5-gpm-horizontal-3-4-shaft-replacement-with-sealed-crankcase","title":"YAMATIC Pressure Washer Pump 3000 PSI 2.5 GPM — Horizontal 3\/4\" Shaft Replacement with Sealed Crankcase","description":"\u003cp\u003e\u003cstrong\u003eThe YAMATIC Horizontal 3\/4\" Shaft Pressure Washer Pump is a direct-replacement pump rated up to 3000 PSI and 2.5 GPM designed to restore performance to 6.5–7.0 HP engines and common power washer models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pressure washer has a worn or leaking pump, this YAMATIC horizontal pump provides a cost-effective way to get back to full cleaning power without buying a new machine. Built for horizontal-shaft engines (3\/4\"), it delivers peak performance around 2600–3000 PSI at 3400 RPM and pairs well with 180–212cc engines. The unit comes as a complete kit with mounting bolts, shaft key, siphon tube and filter, and an instruction booklet for quick installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat performance can I expect from this replacement pump?\u003c\/h3\u003e\n\u003cp\u003eThe pump is rated for a maximum of 3000 PSI and 2.5 gallons per minute, providing strong cleaning force for common outdoor tasks. It is tuned to operate efficiently near its peak output when mated to typical 6.5–7.0 HP engines and 180–212cc platforms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum pressure: 3000 PSI at 3400 RPM\u003c\/li\u003e\n  \u003cli\u003eFlow rate: 2.5 GPM for steady cleaning power\u003c\/li\u003e\n  \u003cli\u003eBest practical range: 2600–3000 PSI for sustained performance\u003c\/li\u003e\n  \u003cli\u003eDesigned for horizontal 3\/4\" shaft engines on residential units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the YAMATIC pump and what protects it?\u003c\/h3\u003e\n\u003cp\u003eThis pump uses a double-seal system and upgraded piston\/bearing surfaces to reduce wear and leaks, extending service life above typical OE units. A thermal relief valve helps prevent overheating during bypass operation, and the sealed crankcase eliminates routine oil changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble seal technology to minimize leakage\u003c\/li\u003e\n  \u003cli\u003eUpgraded piston and bearing surfacing for longer life\u003c\/li\u003e\n  \u003cli\u003eThermal relief valve (TRV) to avoid heat build-up in bypass\u003c\/li\u003e\n  \u003cli\u003eMaintenance-free sealed crankcase—no oil changes required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this pump fit my pressure washer and how hard is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the common hardware and fittings needed for most horizontal-shaft replacements, and it lists direct cross-references to popular brands. Setup is straightforward for someone familiar with small-engine maintenance and typically takes about 5–10 minutes once the old pump is removed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many Simpson, Homelite, Honda, Karcher, Troy-Bilt models\u003c\/li\u003e\n  \u003cli\u003eIncludes siphon tube with filter, mounting bolts and shaft key\u003c\/li\u003e\n  \u003cli\u003eInstruction booklet guides basic installation steps\u003c\/li\u003e\n  \u003cli\u003eAdjustable unloader lets you tune pressure to match your engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the adjustable unloader and start features affect use?\u003c\/h3\u003e\n\u003cp\u003eThe adjustable unloader allows you to raise or lower system pressure so the engine and pump run more efficiently under different loads. A user-friendly cold-start feature eliminates the need to release pressure before starting the engine, making restarts quicker and easier.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable unloader for pressure tuning and smoother operation\u003c\/li\u003e\n  \u003cli\u003eCold-start capability simplifies engine starts without pressure release\u003c\/li\u003e\n  \u003cli\u003eSiphon filter included to protect pump from debris\u003c\/li\u003e\n  \u003cli\u003eSet up and ready for basic residential cleaning tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC Horizontal 3\/4\" Shaft Pressure Washer Pump is aimed at homeowners and service technicians who want to repair a horizontal-shaft pressure washer with a cost-effective replacement. It suits owners of 180–212cc engines or 6.5–7.0 HP machines and is compatible with many Simpson, Homelite, Honda, Karcher and Troy-Bilt models. Choose this pump if you need a durable, maintenance-free swap that restores strong cleaning power without replacing the whole unit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pump compatible with my Simpson MSH3125?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This YAMATIC pump lists Simpson MSH3125 and related model numbers as compatible replacements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to change oil for this pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The crankcase is sealed and maintenance-free, so routine oil changes are not required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56836895932756,"sku":"B0DY74WQ5J","price":119.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-front-view-pump_cd2e12cd-acf0-4962-a928-966ccafc9395.jpg?v=1787058597"},{"product_id":"yamatic-pressure-washer-wand-with-stainless-steel-extension-lance-4000-psi-360-swivel-quick-connect-kit","title":"YAMATIC Pressure Washer Wand with Stainless Steel Extension Lance — 4000 PSI, 360° Swivel \u0026 Quick-Connect Kit","description":"\u003cstrong\u003eThe YAMATIC Pressure Washer Wand is a heavy-duty trigger gun with stainless steel extension lances and a 360° swivel inlet, built to handle up to 4000 PSI for efficient, tangle-free high-pressure cleaning.\u003c\/strong\u003e\n\n\u003cp\u003eThis pressure washer wand upgrades your power-washing tasks with a durable brass inlet, stainless steel extension tubes, and a swivel that prevents hose tangles. Designed to attach to most popular pressure washer brands, the wand arrives as a complete kit with quick connectors and five nozzle tips so you can switch spray patterns quickly. It’s intended for use only with a high-pressure washer and high-pressure hose — not a garden hose.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 360-degree swivel inlet help during long cleaning jobs?\u003c\/h3\u003e\n\u003cp\u003eThe swivel inlet rotates freely to keep the high-pressure hose from twisting, which reduces resistance and the need to stop and untangle. That smoother operation translates to fewer interruptions and less wrist strain when you’re cleaning large surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwivel rotates 360° to prevent hose kinks and tangles.\u003c\/li\u003e\n  \u003cli\u003eFaster workflow — clean longer without repositioning the hose.\u003c\/li\u003e\n  \u003cli\u003eBetter maneuverability around corners and vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat extension length options and materials does it use?\u003c\/h3\u003e\n\u003cp\u003eThe gun includes two stainless steel extension lances that can be used independently or combined to form three different working lengths. Stainless steel tubing and a ceramic internal trigger provide low vibration and robust corrosion resistance, extending the tool’s usable life in wet environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo detachable stainless steel lances for variable reach.\u003c\/li\u003e\n  \u003cli\u003eCombine lances or remove one to adapt to different tasks.\u003c\/li\u003e\n  \u003cli\u003eCeramic trigger and steel pole connector for durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fittings and nozzles are included for compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe set arrives with a 3\/8\" swivel quick connector, an M22–14mm male coupler, and five spray tips to cover a broad range of spray angles and pressures. These connectors make the wand compatible with many commercial and consumer pressure washer brands when paired with a high-pressure hose.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" swivel quick connector for easy attachment.\u003c\/li\u003e\n  \u003cli\u003eM22–14mm male coupler improves brand compatibility.\u003c\/li\u003e\n  \u003cli\u003eFive nozzle tips for adjustable spray patterns and a foam-capable tip for detergents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the gun comfortable and safe to use for extended periods?\u003c\/h3\u003e\n\u003cp\u003eErgonomic shockproof handle design and a lightweight pull-trigger reduce hand fatigue during long sessions. The internal components are sized for high-pressure use and the maximum water temperature rating is 60°C (140°F), keeping operation within safe limits for most cleaning tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShockproof handle and lightweight trigger for reduced fatigue.\u003c\/li\u003e\n  \u003cli\u003eRated to 4000 PSI and max water temperature 60°C\/140°F.\u003c\/li\u003e\n  \u003cli\u003eSolid brass inlet and 1\/4\" brass quick connector to minimize leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YAMATIC Pressure Washer Wand suits homeowners, detail shops, contractors, and property managers who need reach, reliability, and fewer hose hassles during pressure washing. It’s ideal for cleaning cars, decks, driveways, windows, roofs, pool surrounds, and commercial surfaces when used with a compatible high-pressure washer and hose. If you rely on fast, repeatable results and want a kit that includes multiple connectors and nozzle tips, this wand streamlines the job and reduces downtime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this wand be used with a garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It must be connected to a high-pressure washer and a high-pressure hose, not a garden or regular water hose.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What brands is this compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with many brands including SIMPSON, Craftsman, Ryobi, Troy-Bilt, Champion, Honda, and Excell when used with the right coupler.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMATIC","offers":[{"title":"Default Title","offer_id":56836968448340,"sku":"B09XX854Y8","price":106.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/yamatic-pressure-washer-wand-front-view.jpg?v=1787058640"}],"url":"https:\/\/gardenluxe.co.uk\/collections\/brand-yamatic.oembed","provider":"Gardenluxe Uk","version":"1.0","type":"link"}