{"title":"Votenli","description":"\u003cp\u003eBrowse our full Votenli range. Every order ships free across the UK, with free 30-day returns as standard.\u003c\/p\u003e","products":[{"product_id":"votenli-stainless-steel-cooking-grid-grate-16-3-8-x-21-1-2-in-1-pack-corrosion-resistant-easy-clean","title":"Votenli Stainless Steel Cooking Grid Grate 16 3\/8 x 21 1\/2 in (1-Pack) — Corrosion-Resistant, Easy-Clean","description":"\u003cp\u003e\u003cstrong\u003eVotenli S5421A is a single, heavy-gauge stainless steel cooking grid sized 16 3\/8 x 21 1\/2 inches, made to replace the factory grates on compatible Charbroil grills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Charbroil grill needs a clean, durable replacement grate, this Votenli stainless steel cooking grid matches the original dimensions for models listed and provides a corrosion-resistant cooking surface. It’s sold as one piece and built from stainless wire for easier cleaning, stable heat transfer, and longer life than cheap plated alternatives.\u003c\/p\u003e\n\n\u003ch3\u003eWill this fit my Charbroil grill model?\u003c\/h3\u003e\n\n\u003cp\u003eThis Votenli grid is intended to fit Charbroil part numbers 463722313, 463722314, 463742111, and 463722315 when the OEM grate measures 16 3\/8 by 21 1\/2 inches. Always confirm dimensions of the existing grate before ordering to avoid compatibility issues. If your old grate matches these measurements, the Votenli piece should drop in with no modification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned to match specified Charbroil part numbers\u003c\/li\u003e\n  \u003cli\u003eExact dimensions: 16 3\/8\" x 21 1\/2\"\u003c\/li\u003e\n  \u003cli\u003eSingle-piece listing — one cooking grid included\u003c\/li\u003e\n  \u003cli\u003eRecommended: measure your original grate to confirm fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and easy to clean is this stainless steel cooking grid?\u003c\/h3\u003e\n\n\u003cp\u003eThe grate is made from stainless steel wire that resists rust and withstands routine grilling temperatures better than many painted or plated replacements. Its smooth stainless surface simplifies removal of stuck-on food and grease. Routine scrubbing with a grill brush or soaking for heavier buildup restores appearance and performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStainless construction for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eSmooth wires reduce food adhesion and simplify cleaning\u003c\/li\u003e\n  \u003cli\u003eSuitable for regular grill maintenance and scrubbing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat cooking performance can I expect from this replacement grate?\u003c\/h3\u003e\n\n\u003cp\u003eThe stainless wires provide even contact and predictable heat transfer to sear foods and produce clear grill marks while maintaining stable placement for pots and pans. It won’t warp under typical grilling conditions and supports proper airflow for charcoal or gas setups. For the best results, preheat the grill and oil the grate lightly before cooking.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConsistent searing and grill marks\u003c\/li\u003e\n  \u003cli\u003eStable support for cookware and food items\u003c\/li\u003e\n  \u003cli\u003eMaintains shape under normal grilling temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and service?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: lift out the old grate and position the Votenli grid on the existing supports. No tools or adjustments are typically required if the original dimensions match. Votenli recommends measuring the old part and contacting their support if you have questions or receive a damaged item.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSimple drop-in replacement for matching grates\u003c\/li\u003e\n  \u003cli\u003eNo special tools or alterations usually needed\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fit or service questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Grill owners who need a reliable, corrosion-resistant replacement grate for compatible Charbroil models and want a single high-quality stainless steel cooking grid that matches original dimensions. This product suits backyard cooks who value easy cleaning, steady performance, and a direct OEM-style fit without buying a full OEM part.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this grate fit Charbroil 463722314?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Votenli S5421A fits 463722314 if your original grate measures 16 3\/8 x 21 1\/2 inches. Measure to confirm before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the cooking grid rust-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The grate is stainless steel, which resists rust better than plated options; regular cleaning prolongs its life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56798951735636,"sku":"B07M5PZWNQ","price":100.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-view-cooking-grid.jpg?v=1786727934"},{"product_id":"votenli-s9035a-16ga-stainless-steel-heat-plates-3-pack-for-american-outdoor-grill-30nb-30pc-oem-fit-corrosion-resistant","title":"Votenli S9035A 16GA Stainless Steel Heat Plates (3-Pack) for American Outdoor Grill 30NB\/30PC — OEM Fit, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eVotenli S9035A stainless-steel heat plate set replaces worn vaporizer shields on American Outdoor Grill 30NB and 30PC models, restoring even heat distribution and flame protection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your grill has uneven cooking, flare-ups, or rusty, warped heat plates, this three-pack of 16-gauge stainless-steel replacements is sized to match the OEM vaporizer shields used on American Outdoor Grill 30NB and 30PC series. Each plate measures approximately 15.5 x 8.25 inches and is built to resist corrosion and high heat, making it a straightforward way to refresh the performance and appearance of your grill without buying a new unit.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these heat plates improve my grill's performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing damaged or corroded heat plates evens out heat across the cooking surface and shields burners from grease and debris. That reduces hot spots, limits flare-ups, and prolongs burner life while giving more consistent searing and roasting results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores even heat distribution over the full grate area.\u003c\/li\u003e\n  \u003cli\u003eDeflects grease away from burners to reduce flare-ups.\u003c\/li\u003e\n  \u003cli\u003eProtects burners from drips and debris, extending their service life.\u003c\/li\u003e\n  \u003cli\u003eStainless steel resists rust for longer-lasting performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these heat plates compatible with my American Outdoor Grill model?\u003c\/h3\u003e\n\u003cp\u003eThese plates are designed to fit American Outdoor Grill 30NB and 30PC models; measure your existing plates to confirm fit before ordering. Each replacement measures roughly 15.5 by 8.25 inches and is shaped to match the OEM vaporizer shield profile used in those grill heads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits American Outdoor Grill models: 30NB and 30PC.\u003c\/li\u003e\n  \u003cli\u003eDimensions: about 15.5 in x 8.25 in per plate for accurate replacement.\u003c\/li\u003e\n  \u003cli\u003eSold as a set of three to replace all primary vaporizer shields at once.\u003c\/li\u003e\n  \u003cli\u003eMeasure original parts to ensure exact fit for nonstandard installs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat material and thickness are these heat plates, and why does it matter?\u003c\/h3\u003e\n\u003cp\u003eMade from 16-gauge stainless steel, these heat plates balance durability and heat conduction without being overly heavy. The stainless finish improves resistance to rust and simplifies cleaning, while the gauge provides enough rigidity to maintain shape under high grill temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16-gauge stainless steel for strength and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eThin enough for heat transfer, rigid enough to avoid warping quickly.\u003c\/li\u003e\n  \u003cli\u003eStainless surface helps prevent scaling and simplifies wipe-downs.\u003c\/li\u003e\n  \u003cli\u003eOEM-style shape preserves intended heat and grease flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check before starting?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a straightforward, tool-light task for most grills: remove the cooking grates, lift out the old plates, and set the new ones in place. Before you begin, ensure the grill is cool and measure the old plates to confirm compatibility; keep fasteners if your model uses clips or screws to secure the vaporizer shields.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove cooking grates and cool the grill fully before working.\u003c\/li\u003e\n  \u003cli\u003eLift out old heat plates and compare dimensions to the new plates.\u003c\/li\u003e\n  \u003cli\u003eDrop new plates into position; secure with existing clips if required.\u003c\/li\u003e\n  \u003cli\u003eTest-burn on low after installation to clear manufacturing residues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Home grill owners who use American Outdoor Grill 30NB or 30PC models and want a durable, affordable way to restore even cooking and protect burners. This three-pack suits anyone replacing multiple vaporizer shields at once — DIYers who prefer a quick swap, backyard cooks seeking more consistent heat, and maintenance-minded owners who want to prevent flare-ups and extend their grill's lifespan.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these plates fit my 30PC grill?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The plates are sized for American Outdoor Grill 30PC and 30NB models; measure your original 15.5 x 8.25 in plates to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many heat plates are included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This listing includes three 16-gauge stainless-steel heat plates, enough to replace the primary vaporizers in the grill.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56799216238932,"sku":"B07JV9Z9TM","price":95.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-heat-plates.jpg?v=1786729567"},{"product_id":"votenli-stainless-steel-replacement-cooking-grate-13-1-4-x-24-in-1-pack-corrosion-resistant-direct-fit-for-broilmaster-p3-g3-d3","title":"Votenli Stainless Steel Replacement Cooking Grate 13 1\/4 x 24 in — 1-Pack, Corrosion-Resistant Direct-Fit for Broilmaster P3 G3 D3","description":"\u003cp\u003e\u003cstrong\u003eThe Votenli S5402A is a 13 1\/4 x 24-inch stainless steel replacement cooking grate engineered to restore even cooking performance on Broilmaster P3, D3, G3 and T3 gas grills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Broilmaster’s factory grate is warped, corroded or missing, this single-pack Votenli stainless steel grate offers a direct-fit alternative sized to match the original footprint. Built from corrosion-resistant stainless steel, it provides a stable cooking surface and simplifies maintenance compared with older, pitted cast or plated grates. Before ordering, confirm your grill model and measure the existing grate to ensure the 13 1\/4 x 24 inch dimensions align with your appliance.\u003c\/p\u003e\n\n\u003ch3\u003eWill this grate fit my Broilmaster P3, G3, D3 or T3 grill?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the S5402A is manufactured to match the replacement specifications used by several Broilmaster variants. It’s sold as a universal fit for the P3, D3, G3 and T3 lineups when the original grate measures 13 1\/4 by 24 inches.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Broilmaster P3, D3, G3, T3.\u003c\/li\u003e\n  \u003cli\u003eExact dimensions: 13 1\/4 x 24 inches for direct swap-in replacement.\u003c\/li\u003e\n  \u003cli\u003eConfirm fit: compare with your grill’s current grate before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does stainless steel benefit cooking and maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eStainless steel resists rust and holds up to repeated heating cycles, making it easier to clean and more durable than many plated or cast alternatives. It heats evenly across the bars, helps create reliable sear marks, and requires less aggressive care to remove food residue.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant finish for longer service life.\u003c\/li\u003e\n  \u003cli\u003eSmoother surface for easier brushing and wiping.\u003c\/li\u003e\n  \u003cli\u003eEven heat conduction for consistent grilling results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and upkeep?\u003c\/h3\u003e\n\n\u0026gt; \u003cp\u003eInstallation is straightforward — lift out the old grate and lower the Votenli S5402A into place if the measurements match. Routine cleaning takes minutes with a grill brush and warm soapy water; occasional deep cleaning can be done with a stainless-safe cleaner to remove grease buildup.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTool-free swap: aligns with existing support ledges on compatible grills.\u003c\/li\u003e\n  \u003cli\u003eDaily maintenance: brush after each use to prevent residue buildup.\u003c\/li\u003e\n  \u003cli\u003eDeep clean: soak and scrub with non-abrasive stainless cleaners as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect in terms of durability and warranty support?\u003c\/h3\u003e\n\n\u003cp\u003eThe Votenli grate is designed for routine home use and resists common wear from heat and outdoor conditions better than untreated metals. If the part you receive has a defect or doesn’t match the size you ordered, Votenli offers customer support to resolve fit or quality issues — check your order details and contact seller support for assistance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial: stainless steel for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eSold as a single 13 1\/4 x 24 inch cooking grate (1-pack).\u003c\/li\u003e\n  \u003cli\u003eAfter-sales support: contact Votenli for any product problems or sizing concerns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Home grill owners with Broilmaster P3, D3, G3 or T3 models who need a dependable, easy-to-clean replacement grate that matches the original 13 1\/4 x 24 inch footprint. It’s suitable for users who prefer stainless steel durability over older plated grates and want a straightforward swap to restore cooking performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this grate come as a single piece or a set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It ships as a single 13 1\/4 x 24 inch cooking grate (1-pack).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this on grills other than Broilmaster models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if the grill accepts a 13 1\/4 x 24 inch grate; verify support ledges and measurements first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56799284822356,"sku":"B081QLHXMF","price":98.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-grate.jpg?v=1786730547"},{"product_id":"votenli-stainless-steel-replacement-grill-grates-3-pack-17-x-11-1-8-in-7-0mm-bars-for-nexgrill-720-0896-0898","title":"Votenli Stainless Steel Replacement Grill Grates 3-Pack — 17 x 11 1\/8 in, 7.0mm Bars for Nexgrill 720-0896\/0898","description":"\u003cp\u003e\u003cstrong\u003eHeavy-duty stainless-steel replacement cooking grates in a three-pack designed to restore even heat and clear grill marks to compatible Nexgrill models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Votenli S720-0896 grates are aftermarket stainless-steel replacements sized to match common Nexgrill 720-0896 and 720-0898 series cooking grids. Each grate measures 17 x 11 1\/8 inches and is built from 7.0 mm solid stainless bars for long-lasting strength, corrosion resistance, and improved heat retention compared with thin enamel-coated options. The set includes three identical grates to refill a full grill surface or keep spares on hand for seasonal use.\u003c\/p\u003e\n\n\u003ch3\u003eWill these grates fit my Nexgrill model?\u003c\/h3\u003e\n\n\u003cp\u003eThese grates are manufactured to fit a range of Nexgrill models commonly sold under the 720-0896 and 720-0898 family numbers. They’re aftermarket parts, so fit depends on matching dimensions rather than brand name alone—measure your current grates before you order to confirm compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with models: 720-0896, 720-0896B, 720-0896BK, 720-0896E, 720-0896C, 720-0896CP, 720-0898, 720-0898A.\u003c\/li\u003e\n  \u003cli\u003eEach grate size: 17 x 11 1\/8 inches; three-grate total coverage equals approximately 17 x 33 3\/8 inches when placed side-by-side.\u003c\/li\u003e\n  \u003cli\u003eMeasure your original grates and compare to these dimensions before purchasing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these stainless grates perform compared to enamel or cast options?\u003c\/h3\u003e\n\n\u003cp\u003eSolid stainless bars offer several practical advantages: they resist chipping and rust, clean more easily, and deliver consistent heat across the cooking surface. That makes them a sensible choice if you want dependable searing and fewer maintenance surprises over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThicker 7.0 mm bars maintain heat for steadier searing and better grill marks.\u003c\/li\u003e\n  \u003cli\u003eStainless steel resists flaking and rust unlike some coated grates.\u003c\/li\u003e\n  \u003cli\u003eSimple cleaning with a brush or soak; won’t chip from regular use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and dimensions should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe Votenli set uses solid stainless-steel rods 7.0 mm thick, formed into three identical grates. Each unit measures 17 inches across by 11 1\/8 inches deep; combined they cover roughly 17 by 33 3\/8 inches when installed side-by-side in the compatible Nexgrill models.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial: stainless steel bars; corrosion resistant and durable.\u003c\/li\u003e\n  \u003cli\u003eSingle grate size: 17 x 11 1\/8 inches; three-pack for full coverage.\u003c\/li\u003e\n  \u003cli\u003eBar thickness: 7.0 mm for improved heat retention and strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and care for these replacement grates?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward—remove old grates, confirm the new grates match the original dimensions, then seat each grate in the cooking rack supports. Routine care keeps them performing: brush after each use, deep-clean periodically, and avoid harsh abrasives that might dull the finish.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInstallation: swap out old grates with matched dimensions; no special tools required.\u003c\/li\u003e\n  \u003cli\u003eMaintenance: brush and wipe after cooling; occasional soak for stubborn residue.\u003c\/li\u003e\n  \u003cli\u003eStorage: keep dry when not in use to preserve appearance and longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Grill owners with Nexgrill 720-0896 or 720-0898 family grills who want a reliable, rust-resistant aftermarket replacement set that restores cooking performance and searing. Choose this Votenli three-pack if you need full-surface coverage, want thicker stainless bars than typical enamel grates, and prefer easy cleaning and long-term durability. Remember to measure your current grates and compare dimensions before ordering to ensure a proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these grates compatible with Nexgrill 720-0896 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these Votenli grates fit Nexgrill models listed (720-0896 series and 720-0898 series) when dimensions match; measure your original parts first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the grate dimensions and material?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each grate is 17 x 11 1\/8 inches, made from 7.0 mm solid stainless-steel bars; set includes three grates.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56799336235348,"sku":"B08D8KB4ML","price":110.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-grate-front-view.jpg?v=1786731418"},{"product_id":"votenli-cast-iron-cooking-grid-replacement-for-big-green-egg-large-18-3-16-heavy-duty-sear-grate-1-pack","title":"Votenli Cast Iron Cooking Grid Replacement for Big Green Egg Large — 18 3\/16\" Heavy-Duty Sear Grate (1-Pack)","description":"\u003cp\u003e\u003cstrong\u003eVotenli's 18 3\/16-inch cast iron round cooking grid is a heavy-duty replacement grate engineered to fit Big Green Egg Large and specified Vision Grill models, delivering steady heat retention and pronounced sear marks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your original grate is warped, rusted, or you want the superior searing performance of cast iron, this Votenli C6999A one-pack grid provides a durable, high-heat cooking surface sized for Big Green Egg Large and compatible Vision Grill models VGKSS-CC2 and B-11N1A1-Y2A. It’s manufactured from solid cast iron to heat evenly and hold temperature for longer cooks, making it a practical replacement or upgrade for charcoal and kamado-style grills.\u003c\/p\u003e\n\n\u003ch3\u003eWill this grate fit my Big Green Egg or Vision Grill?\u003c\/h3\u003e\n\u003cp\u003eMeasure your existing cooking surface diameter and compare models before purchasing. The Votenli grid is 18 3\/16 inches in diameter and designed to match the footprint of Big Green Egg Large and the listed Vision Grill model numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Big Green Egg Large and Vision Grill VGKSS-CC2, B-11N1A1-Y2A\u003c\/li\u003e\n  \u003cli\u003e18 3\/16-inch round pie-shaped cast iron design\u003c\/li\u003e\n  \u003cli\u003eNot an OEM part—confirm dimensions against your original grate\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does cast iron improve grilling results?\u003c\/h3\u003e\n\u003cp\u003eCast iron stores and distributes heat more effectively than thin steel grates, producing hotter contact points and uniform cooking. That superior thermal mass helps achieve clear sear lines on steaks and vegetables while maintaining stable cooking temperatures for longer sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExcellent heat retention for steady cooking temperatures\u003c\/li\u003e\n  \u003cli\u003eCreates professional-looking sear marks and crusts\u003c\/li\u003e\n  \u003cli\u003eDurable construction resists warping under high heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance keeps the grate rust-free and long-lasting?\u003c\/h3\u003e\n\u003cp\u003eCast iron requires simple care to prevent corrosion and preserve its nonstick qualities. Regular scraping, seasoning with oil, and storing the grill with some ventilation will protect the surface and extend the life of the grate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eScrape residue after each use to remove stuck food\u003c\/li\u003e\n  \u003cli\u003eBrush with a thin coat of cooking oil while warm to season\u003c\/li\u003e\n  \u003cli\u003eLeave dampers slightly open and cover the grill to avoid condensation\u003c\/li\u003e\n  \u003cli\u003eFor long-term storage, heavily coat with oil and wrap in plastic inside a covered grill\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and easy to clean is this replacement grid?\u003c\/h3\u003e\n\u003cp\u003eMade from heavy-duty cast iron, the Votenli grate withstands repeated high-heat cycles and resists deformation better than thinner metals. Cleaning is straightforward when you follow best practices: scrape, re-season, and avoid prolonged moisture exposure to preserve the surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust cast iron construction for repeated high-heat use\u003c\/li\u003e\n  \u003cli\u003eSimple maintenance—scrape, oil, and dry to prevent rust\u003c\/li\u003e\n  \u003cli\u003eDesigned as a dependable replacement or spare cooking surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Grillers who own a Big Green Egg Large or the compatible Vision Grill models and want a rugged cast iron cooking surface will appreciate this Votenli replacement. It’s suited to backyard enthusiasts aiming for better searing, hunters of reliable replacements when original parts age, and anyone who prefers the heat-holding performance of cast iron for longer cooks. Before ordering, verify the 18 3\/16-inch diameter matches your original grate dimensions; if you need help after purchase, Votenli offers customer service to resolve fit or product questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this Votenli grate an original Big Green Egg part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, it is an aftermarket replacement sized for Big Green Egg Large and compatible Vision Grill models; verify dimensions before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I prevent rust on this cast iron grate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Scrape after each use, season with oil while warm, keep dampers slightly open, and cover the grill when not in use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56799502598484,"sku":"B08157F23C","price":109.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-grid.jpg?v=1786733670"},{"product_id":"votenli-cast-iron-grill-grates-replacement-3-pack-19-3-4-x-6-3-4-heavy-duty-gloss-cast-iron-fits-chargriller-models","title":"Votenli Cast Iron Grill Grates Replacement 3‑Pack 19 3\/4\" x 6 3\/4\" — Heavy‑Duty Gloss Cast Iron, Fits Chargriller Models","description":"\u003cp\u003e\u003cstrong\u003eThese Votenli C6505A cast iron cooking grates are a three-piece replacement set (19 3\/4\" x 6 3\/4\" each) designed to restore even heat and classic sear marks to compatible Chargriller and King Griller gas grills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Chargriller or King Griller grate is warped, rusted, or missing, the Votenli C6505A 3-pack gives you three heavy-duty gloss cast iron grids sized to match many popular models. Each individual grate measures 19 3\/4\" by 6 3\/4\", and together they cover 19 3\/4\" x 20 1\/4\" of cooking area. These replacement grates reproduce the look and cooking surface of original equipment, with the heft and heat retention cast iron is known for.\u003c\/p\u003e\n\n\u003ch3\u003eWhich grill models will these grates fit?\u003c\/h3\u003e\n\u003cp\u003eThe Votenli C6505A set is made to fit a wide range of Chargriller and some King Griller gas grills. Before ordering, compare your existing grate size and model number to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Chargriller models include: 2121, 2123, 2222, 2828, 3001, 3008, 3030, 3072, 3232, 3725, 4000, 4001, 4008, 4208, 5050, 5072, 5252, 9020.\u003c\/li\u003e\n  \u003cli\u003eCompatible King Griller models: 3008 and 5252; also fits Char-Griller Duo 5050.\u003c\/li\u003e\n  \u003cli\u003eOverall assembled coverage: 19 3\/4\" x 20 1\/4\" (three pieces: 19 3\/4\" x 6 3\/4\" each).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these cast iron grates affect cooking performance?\u003c\/h3\u003e\n\u003cp\u003eCast iron retains and distributes heat differently than stainless steel, producing stronger sear marks and more consistent surface temperatures. That makes them useful for steaks, chops, and vegetables where crust development matters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExcellent heat retention for steady searing and browning.\u003c\/li\u003e\n  \u003cli\u003eGloss cast iron surface promotes even contact and grill marks.\u003c\/li\u003e\n  \u003cli\u003eHeavy construction reduces hot-spot variability across the cooking area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and care?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: remove the old grates and drop each 19 3\/4\" section into place. Because these grates are cast iron, handle with care during unpacking and follow basic maintenance to extend life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect on delivery — cast iron can crack if mishandled during shipping.\u003c\/li\u003e\n  \u003cli\u003eSeason before first use by oiling and heating to build a protective surface.\u003c\/li\u003e\n  \u003cli\u003eClean with a stiff brush after use; avoid soaking in water and dry thoroughly to prevent rust.\u003c\/li\u003e\n  \u003cli\u003eConfirm measurements and model compatibility before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any limitations or safety tips to consider?\u003c\/h3\u003e\n\u003cp\u003eCast iron is durable for cooking but brittle under impact; it can chip or break if dropped. Use proper lifting and avoid sudden temperature shocks for longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFragile to impacts — unpack and inspect carefully upon delivery.\u003c\/li\u003e\n  \u003cli\u003eAvoid thermal shock (don’t plunge hot grates into cold water).\u003c\/li\u003e\n  \u003cli\u003eKeep a light oiling regimen to discourage rust between uses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Votenli C6505A 3-pack is ideal for grill owners who want to replace worn or damaged grates on compatible Chargriller or King Griller gas models and prefer the high-heat searing performance of cast iron. Choose this set if you need an exact-size three-piece replacement (19 3\/4\" x 6 3\/4\" each) to restore full cooking area, appreciate robust heat retention for better sears, and are willing to follow standard cast-iron care to keep the grates performing season after season.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these grates fit my Chargriller 3008?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Votenli C6505A 3-pack is compatible with Chargriller 3008 and matches the 19 3\/4\" x 6 3\/4\" sections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I prevent rust on these cast iron grates?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Season them with oil after cleaning, dry completely, and store in a dry place to minimize rust formation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56819473744212,"sku":"B08155V7PT","price":100.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-grates.jpg?v=1786962966"},{"product_id":"votenli-flavorizer-bars-for-weber-5-pack-22-5in-16ga-stainless-steel-restores-even-heat","title":"Votenli Flavorizer Bars for Weber — 5-Pack 22.5in 16GA Stainless Steel, Restores Even Heat","description":"\u003cb\u003eVotenli S753F are 22.5-inch 16-gauge stainless steel replacement flavorizer bars sold as a 5-pack that restore heat distribution and protect burners on compatible Weber Genesis and Spirit models.\u003c\/b\u003e\n\nIf your grill’s original flavorizer bars are corroded, warped, or missing, these aftermarket stainless steel shields provide a straightforward swap to help even heat across the cooking surface and deflect drippings away from burners. They match the length and profile used on many Weber Genesis Silver, Genesis Gold, Genesis Platinum, Spirit 300\/700 series, and Weber 900 series grills from 2002 onward. Before purchasing, measure your existing bar length to confirm compatibility—these measure 22.5\" long by 2.25\" wide and come five per pack.\n\n\u003ch3\u003eWill these flavorizer bars fit my Weber model?\u003c\/h3\u003e\n\u003cp\u003eThey are designed for a wide range of Weber models, including Genesis Silver\/Gold\/Platinum B \u0026amp; C series, Spirit 300 and 700 series, Spirit E-310\/SP-310, and Weber 900 machines. Compatibility covers many factory part numbers across model years, but exact fit depends on the bar length and mounting style used by your grill.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 22.5 inches (measure your current bar before ordering)\u003c\/li\u003e\n  \u003cli\u003eWidth\/profile: standard Weber-style flavorizer bar cross-section\u003c\/li\u003e\n  \u003cli\u003eCommonly replaces OEM part numbers used on Genesis and Spirit series\u003c\/li\u003e\n  \u003cli\u003eDesigned for 2002–newer model families listed in product details\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eThese bars are made from 16-gauge stainless steel, chosen for better corrosion resistance than untreated metal. They resist rust and tolerate typical grilling temperatures, but like all grill parts they will age with heavy use—regular cleaning extends service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16GA stainless steel construction for improved rust resistance\u003c\/li\u003e\n  \u003cli\u003eManufactured to withstand normal grilling heat and drippings\u003c\/li\u003e\n  \u003cli\u003eEasier to clean than heavily corroded originals if maintained\u003c\/li\u003e\n  \u003cli\u003eSold as five identical replacement bars for full-coverage swaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these bars affect cooking performance and maintenance?\u003c\/h3\u003e\n\u003cp\u003eFlavorizer bars shield burners from flare-ups, convert drippings into smoke for flavor, and help distribute heat. Replacing worn or missing bars restores a more even grill temperature and reduces direct flame contact that can scorch food or damage burners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces flare-ups by deflecting grease away from burners\u003c\/li\u003e\n  \u003cli\u003ePromotes smoky flavor by vaporizing drips on the bar surface\u003c\/li\u003e\n  \u003cli\u003eHelps even out hot spots for more consistent cooking results\u003c\/li\u003e\n  \u003cli\u003eSimple swap: lift old bars and set new bars into existing supports\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThese Votenli flavorizer bars suit grill owners who need economical aftermarket replacements that match common Weber configurations. Choose this 5-pack if you have multiple worn bars to replace or want spare parts for seasonal maintenance. Ideal buyers will verify bar length and mounting style on their grill, clean and inspect burners when swapping, and prefer stainless steel for improved longevity over untreated replacements.\n\n\u003cul\u003e\n  \u003cli\u003eIncludes five 22.5\" stainless steel flavorizer bars\u003c\/li\u003e\n  \u003cli\u003eMeasure existing bars before purchase to ensure fit\u003c\/li\u003e\n  \u003cli\u003eNo tools required for most replacement installs\u003c\/li\u003e\n  \u003cli\u003eNot an OEM Weber part—compatible aftermarket replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these Votenli bars genuine Weber parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, they are aftermarket replacements designed to fit many Weber Genesis and Spirit models but not sold as OEM Weber parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm these bars will fit my grill?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Measure your current flavorizer bar length; these are 22.5 inches long and fit grills using that size\/profile.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56824259641684,"sku":"B07Q73KNGS","price":86.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-5-pack.jpg?v=1786981998"},{"product_id":"votenli-cast-iron-burner-tubes-15-13-16-3-pack-replacement-grill-burners-for-jenn-air-nexgrill-char-broil-durable-oem-fit","title":"Votenli Cast-Iron Burner Tubes 15 13\/16\" (3-Pack) – Replacement Grill Burners for Jenn‑Air, Nexgrill \u0026 Char‑Broil, Durable OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eThe Votenli C2630A is a set of three 15 13\/16\" cast-iron burner tubes engineered to restore even heat and reliable flame to compatible Jenn‑Air, Nexgrill and Char‑Broil gas grills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement burner pipes are made to fit specific gas-grill models and original part numbers so you can swap out worn or damaged burners without buying a whole cooking system. Manufactured from durable cast iron, the set offers a close match to factory parts in size and connection layout. Below you’ll find clear answers to common buyer questions about fit, installation, performance and maintenance to help you decide if this 3-pack is the right repair part for your grill.\u003c\/p\u003e\n\n\u003ch3\u003eWhich grill models and part numbers does this burner tube kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis Votenli C2630A kit is designed to replace OEM burner tubes used across multiple Jenn‑Air, Nexgrill and Char‑Broil models. Check your grill’s model and the existing burner dimensions against the list before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Jenn‑Air and Nexgrill models include: 720-0061, 720-0062, 720-0063, 720-0099, 720-0100, 720-0101, 720-0138, 720-0139, 720-0141, 720-0142, 720-0150, 720-0163, 720-0164, 720-0165, 720-0171, 720-0671.\u003c\/li\u003e\n  \u003cli\u003eCompatible Char‑Broil models include: 463241004, 463241904, 463247404, 463247504, 463251705, 463252205.\u003c\/li\u003e\n  \u003cli\u003eOriginal part numbers referenced: 80001254, 80000431, CIJA — verify match with your current burner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I verify size and fit before I buy?\u003c\/h3\u003e\n\u003cp\u003eAccurate measurement prevents returns and ensures the new tubes mate correctly with your manifold and brackets. Measure the length and the mounting features of your existing burners and compare them to the listed dimensions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNominal dimension for each tube: 15 13\/16\" long by 2 3\/16\" diameter\/profile.\u003c\/li\u003e\n  \u003cli\u003eConfirm mounting hole spacing, end connector type and orientation match your original part.\u003c\/li\u003e\n  \u003cli\u003eIf your current tube has visible part numbers (80001254, 80000431 or CIJA), cross-check those before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and performance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic grill repairs—remove the old tubes, clean the manifold area, and slip the new cast‑iron tubes into place. Once installed, they restore even flame distribution and help the grill recover original heat patterns when matched correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple hand tools typically required: screwdriver, wrench and possibly pliers for clips.\u003c\/li\u003e\n  \u003cli\u003eClean the burner ports and gas manifold before installing to prevent blockage and ensure even ignition.\u003c\/li\u003e\n  \u003cli\u003ePerform a leak test after installation and light each burner to check for steady, even flames.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain these cast‑iron burner tubes to extend life?\u003c\/h3\u003e\n\u003cp\u003eCast iron is durable but benefits from occasional attention: keep ports clear, remove heavy grease buildup, and protect against prolonged moisture exposure. Routine cleaning improves ignition reliability and prevents rust-driven degradation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrush ports gently with a soft wire brush and clear debris with compressed air or a toothpick.\u003c\/li\u003e\n  \u003cli\u003eAfter each grilling season, inspect for cracks, severe corrosion or blocked ports and replace if damaged.\u003c\/li\u003e\n  \u003cli\u003eStore the grill covered or indoors in wet seasons to minimize rust on cast‑iron surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Votenli C2630A 3-pack suits DIY grill owners, maintenance technicians and anyone who wants an affordable way to return Jenn‑Air, Nexgrill or Char‑Broil grills to proper working condition without replacing the entire appliance. If your grill shows uneven heating, weak flames, or visible burner damage and the model\/part numbers match, this set is a practical replacement solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these tubes fit my Jenn‑Air 720‑0165 grill?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Votenli C2630A lists 720‑0165 as compatible; verify your burner measures 15 13\/16\" before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are tools required to install these replacement burners?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools like a screwdriver and wrench are usually sufficient; perform a gas leak test after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56829884236116,"sku":"B0814JZ33J","price":87.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-view-packaging.jpg?v=1786999209"},{"product_id":"votenli-stainless-steel-heat-plates-burners-replacement-kit-15-875in-8-piece-for-broil-king-baron","title":"Votenli Stainless Steel Heat Plates \u0026 Burners Replacement Kit 15.875in 8‑Piece for Broil King \u0026 Baron","description":"\u003cp\u003e\u003cstrong\u003eVotenli replacement kit supplies four 15 7\/8\" stainless steel heat plates plus four 15 13\/16\" stainless burners designed to fit select Broil King and Baron grill models as direct hardware replacements.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eRestore even heat distribution and protect your grill’s flavor zone with this complete 8-piece set from Votenli. Each kit contains four heat plates (15.875 x 6 inches) and four burners (15.8125 x 1.25 inches), manufactured from stainless steel to resist corrosion and withstand regular grilling cycles. Before ordering, verify the dimensions and shape of your original parts to ensure a proper fit with your Broil King or Baron model numbers listed in the specifications.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Broil King and Baron grills will these parts fit?\u003c\/h3\u003e\n\u003cp\u003eThese Votenli components are built to match the form and mounting points of many Broil King models produced from 1992 onward and a range of Baron series grills. Compatibility is determined by the length, width, and bracket locations, so cross-check part dimensions with your current pieces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Broil King models include many 9211, 9215, 9221, 9225, 9235, 9615, 9625, 9635 series variants listed in the product details.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Baron models 320, 340, 420, 440, 490, 540, 590, and 590-S.\u003c\/li\u003e\n  \u003cli\u003eConfirm exact model number and inspect original heat plate and burner shapes before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I measure and confirm these replacements will match my grill?\u003c\/h3\u003e\n\u003cp\u003eAccurate measurement is the most reliable way to verify fit. Measure both the overall length and the usable width where the heat plate and burner sit; also note mounting tabs or bracket placements. If the numbers match the listed dimensions, the Votenli parts should align correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat plate size: 15.875\" (length) x 6\" (width).\u003c\/li\u003e\n  \u003cli\u003eBurner size: 15.8125\" (length) x 1.25\" (diameter\/width).\u003c\/li\u003e\n  \u003cli\u003eCompare mounting hole positions and shapes visually with old parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what tools do I need for installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes four stainless steel heat plates and four stainless steel burners, supplying one full set for a multi-burner grill. Installation typically requires basic hand tools; installation complexity depends on your grill’s model and how accessible the burners and flavor plates are.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 4 heat plates + 4 burners (8 pieces total).\u003c\/li\u003e\n  \u003cli\u003eTools: screwdriver, socket set, and possibly pliers for retaining clips.\u003c\/li\u003e\n  \u003cli\u003eTip: work with the gas supply off and consult your grill manual for safe removal steps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat material and durability characteristics should I expect?\u003c\/h3\u003e\n\u003cp\u003eThese replacements are constructed from stainless steel chosen for its resistance to rust and high heat. Stainless parts help protect burners from drippings and extend the functional life of the grill’s heating elements when installed and maintained properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: stainless steel for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eDesigned to shield burners from grease and flare-ups.\u003c\/li\u003e\n  \u003cli\u003eRoutine cleaning after use helps maintain performance and longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Votenli S9602A\/S1108A kit suits homeowners and grill enthusiasts who need to replace worn or damaged heat plates and burners on compatible Broil King and Baron grills. It’s ideal for anyone restoring older grills, performing preventative maintenance, or replacing corroded components to improve heating consistency. Verify measurements against your existing parts before purchase to ensure a correct match and straightforward installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these parts fit Broil King Baron 420 and 440 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the kit lists compatibility with Baron 420 and 440, but confirm measured dimensions and mounting shape before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many pieces are included and what are the sizes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit contains 4 heat plates (15.875 x 6\") and 4 burners (15.8125 x 1.25\").\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56830036410708,"sku":"B0838K188M","price":89.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-heat-plates-burners.jpg?v=1787000372"},{"product_id":"votenli-27-x-13-25-inch-ash-pan-for-chargriller-1-pack-stainless-coated-steel-with-wire-grate","title":"Votenli 27 x 13.25-inch Ash Pan for Chargriller (1-Pack) — Stainless-Coated Steel with Wire Grate","description":"\u003cp\u003e\u003cstrong\u003eThe Votenli P0350H is a 27 x 13 1\/4-inch stainless-coated steel ash pan with a wire grate and hangers designed to replace worn ash collection trays for compatible Chargriller and Char-Broil charcoal grills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your grill's original ash pan is damaged, rusted, or missing, a reliable replacement restores safe ash containment and easier cleanup. The Votenli P0350H is sized to fit several popular Chargriller models and select Char-Broil parts, offering a heavy-gauge steel body, a wire grate to keep coals elevated, and two hangers for secure installation. This product aims to match OEM fit and function while resisting heat and helping maintain proper airflow under the charcoal bed.\u003c\/p\u003e\n\n\u003ch3\u003eWhich grills will this ash pan fit?\u003c\/h3\u003e\n\u003cp\u003eThe P0350H is engineered to match the dimensions and attachment points of many Chargriller and Char-Broil assemblies, so it swaps in without modification for those listed models. Always measure your current pan to confirm fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Chargriller models: 1224, 1324, 2121, 2222, 2727, 2828, 2929.\u003c\/li\u003e\n\u003cli\u003eAlso fits Chargriller part number 200048 and Char-Broil part numbers 17302056 \/ CB056-036.\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 27 x 13 1\/4 inches to match factory openings.\u003c\/li\u003e\n\u003cli\u003eIncludes two fire grate hangers that align with OEM slots for straightforward replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the wire grate and pan design improve cleanup and performance?\u003c\/h3\u003e\n\u003cp\u003eThe wire grate keeps burning charcoal lifted from the base of the pan so ash falls through while coals remain supported, which improves air circulation and makes ash removal neater. The stainless-coated steel construction resists direct flames and simplifies brushing or rinsing out residue.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWire grate prevents ash buildup under the coals and promotes even burn.\u003c\/li\u003e\n\u003cli\u003eStainless-coated steel body tolerates heat and wipes clean with a brush or damp cloth.\u003c\/li\u003e\n\u003cli\u003eOpen pan profile enables faster ash evacuation and less mess after grilling.\u003c\/li\u003e\n\u003cli\u003eTwo hangers provide secure placement to avoid sagging or misalignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what should I check before installation?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one stainless-coated steel ash pan and two fire grate hangers. Before you install, compare the pan's dimensions and hanger placement with your grill's original parts and inspect mounting points on the cooker for wear or deformation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContents: 1 x ash pan (27 x 13 1\/4 in), 2 x fire grate hangers.\u003c\/li\u003e\n\u003cli\u003eRecommended step: measure your existing pan to ensure a correct match.\u003c\/li\u003e\n\u003cli\u003eCheck that your grill model is listed (Chargriller 1224–2929 series \/ part numbers noted).\u003c\/li\u003e\n\u003cli\u003eContact Votenli support if you need fit guidance or have missing pieces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this pan withstand regular grilling and how long should it last?\u003c\/h3\u003e\n\u003cp\u003eThe coated steel construction is built for routine exposure to charcoal heat and ash, offering a durable alternative to corroded factory pans. Longevity depends on usage, exposure to moisture, and storage practices; rinsing out ash and storing the grill covered will extend service life.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless-coated finish reduces corrosion from ash and weather.\u003c\/li\u003e\n\u003cli\u003eDesigned for repeated heating cycles typical of backyard grilling.\u003c\/li\u003e\n\u003cli\u003eProper cleaning and dry storage prolongs the pan’s usable lifespan.\u003c\/li\u003e\n\u003cli\u003eReplacement hangers restore stable grate support after wear or bending.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Votenli P0350H is for grill owners who need a reliable, OEM-compatible ash pan replacement for Chargriller and certain Char-Broil models. It suits DIY repairers, backyard barbecue enthusiasts, and anyone looking to restore proper ash containment and airflow without modifying the smoker or grill. If you prioritize a straightforward swap-in part with sturdier-than-stock construction and included hangers, this ash pan is a practical choice. Measure first and contact Votenli support for fit confirmation if you’re unsure.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this ash pan fit my Chargriller 2727?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Votenli P0350H is designed to fit Chargriller 2727 and other listed models; measure your existing pan to confirm exact fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the hangers included and easy to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, two fire grate hangers are included and align with OEM slots for a simple swap-in installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56830041719124,"sku":"B07CWG33WW","price":89.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-view-ash-pan.jpg?v=1787000485"},{"product_id":"votenli-cast-iron-grill-grates-2-pack-15-replacement-for-weber-genesis-matte-cast-iron-even-heat","title":"Votenli Cast-Iron Grill Grates 2-Pack 15\" Replacement for Weber\/Genesis — Matte Cast Iron, Even Heat","description":"\u003cp\u003e\u003cstrong\u003eThese Votenli C752B cast-iron cooking grates are a two-piece 15\" replacement set designed to restore even heat and professional sear marks to compatible Weber and Kenmore gas grills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your original grates are warped, rusty, or missing, this pair of matte cast-iron cooking grids gives you a direct-fit, heavy-duty replacement option. Each grate measures 15\" x 11 1\/4\" (15\" x 22 1\/2\" combined) and is engineered to conduct and retain heat for steady cooking across the surface. They’re made to match a long list of Weber Genesis and Spirit models as well as many Kenmore grills—note they are not compatible with Weber models that have a front-mounted control panel.\u003c\/p\u003e\n\n\u003ch3\u003eWhich grill models will these replacement grates work with?\u003c\/h3\u003e\n\u003cp\u003eThese grates are manufactured to fit a wide range of Weber and Kenmore serial models. Check your grill’s model number against the list to confirm compatibility before ordering. They are intended as direct-fit parts for many Genesis Silver A and Spirit 200\/500 series units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Weber model numbers included in the product listing (e.g., 2241298, 2271411, 6811411, etc.).\u003c\/li\u003e\n  \u003cli\u003eCompatible Kenmore model families like 141.15220 through 17228 and others in the 141\/152\/162 series.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for Weber grills with front-mounted control panels—measure your original grate to be safe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these cast-iron grates affect cooking performance?\u003c\/h3\u003e\n\u003cp\u003eCast iron is valued for its ability to absorb and hold heat, which promotes consistent cooking temperatures and crisp sear marks on meats and vegetables. These Votenli grates stabilize surface heat, reducing cold spots and helping with even browning. With proper seasoning and care, they also develop a natural nonstick patina over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThick cast-iron construction for better heat retention and consistent grilling.\u003c\/li\u003e\n  \u003cli\u003eMatte finish that seasons and improves nonstick behavior with use.\u003c\/li\u003e\n  \u003cli\u003ePair design spans your cooking area for uniform temperature coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and material details?\u003c\/h3\u003e\n\u003cp\u003eThe set includes two identical cast-iron grids sized to match many factory grates. Each piece measures 15 inches by 11¼ inches; combined they cover a 15\" x 22½\" cooking area. Their solid cast-iron build provides durability and proven thermal performance on gas grills.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndividual grate size: 15\" x 11 1\/4\" (38.1 cm x 28.6 cm).\u003c\/li\u003e\n  \u003cli\u003eTotal coverage when installed: 15\" x 22 1\/2\" (38.1 cm x 57.2 cm).\u003c\/li\u003e\n  \u003cli\u003eMatte cast-iron material—seasonable and repairable surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about care and installation?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a simple swap if your original grates match the listed dimensions and model compatibility. Before first use, season the cast-iron surface to build a protective layer; avoid harsh detergents when cleaning to preserve the seasoning. For any fit or product issues, the seller provides after-sales support—compare your grill’s part size and model number before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-season with oil and high heat before the first cook for best nonstick results.\u003c\/li\u003e\n  \u003cli\u003eClean with a grill brush and warm water; avoid long soaks or dishwasher cleaning.\u003c\/li\u003e\n  \u003cli\u003eContact Votenli customer service if the grate doesn’t align with your original part.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Grill owners who need a robust, manufacturer-compatible replacement for worn or damaged grates will find these Votenli C752B cast-iron grids a practical choice. They suit people who want better heat retention, improved sear marks, and the option to rebuild a seasoned cooking surface over time. Confirm your grill model and measurement compatibility before purchase to ensure an easy, reliable swap.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these grates fit my Weber Spirit E-210?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this 2-pack lists Weber E-210 NG among compatible models; verify dimensions match your original grates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How should I season the cast-iron grates before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Coat with high-smoke-point oil, heat on the grill until smoking, then cool; repeat once for initial seasoning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56831188730196,"sku":"B081544NQT","price":81.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-view-grates.jpg?v=1787012649"},{"product_id":"votenli-22-5-porcelain-steel-flavorizer-bars-5-pack-for-weber-genesis-spirit-rust-resistant-even-heat","title":"Votenli 22.5\" Porcelain-Steel Flavorizer Bars (5-Pack) for Weber Genesis \u0026 Spirit — Rust-Resistant, Even-Heat","description":"\u003cp\u003e\u003cstrong\u003eThese Votenli P753F porcelain-steel flavorizer bars are 22.5 inches long replacement shields designed to fit many Weber Genesis, Spirit and Weber 900 gas grills, sold as a 5-pack.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your grill’s factory flavorizer bars are rusted, warped or missing, the Votenli P753F set restores the heat distribution and drip protection that helps your burners perform consistently. Made from porcelain-coated steel, these bars offer a protective layer against rust and help vaporize drippings to add smoky aroma back into grilled foods. Before ordering, measure your existing bars to confirm the 22.5\" length and 2.25\" width match your grill’s original parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhich grill models are these bars compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe Votenli P753F bars are engineered to match the dimensions used on a broad range of Weber models from multiple years. They list cross-reference numbers and model families to help ensure a proper fit. Compatibility includes many Genesis, Spirit and Weber 900 series variants, especially later-model and 2002+ product lines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 22.5\" × 2.25\" factory-style flavorizer mounts\u003c\/li\u003e\n  \u003cli\u003eCommon fits: Genesis Silver\/Gold\/Platinum B \u0026amp; C, Spirit 700, Spirit E-310 and Spirit SP-310\u003c\/li\u003e\n  \u003cli\u003eCross-references many Weber part numbers such as 2251001, 2351298, 2381698, and others\u003c\/li\u003e\n  \u003cli\u003eVerify against your grill’s existing bar length and mounting shape before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these bars affect grilling performance?\u003c\/h3\u003e\n\u003cp\u003eProperly installed flavorizer bars protect burners from grease flare-ups, channel drippings away, and create those flavorful smoke vapors when juices hit the heated surface. While they don’t change cooking temperatures directly, they help maintain even heat across the cooking area and extend burner life by shielding them from direct drips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVaporizes drippings to contribute a smoky finish to foods\u003c\/li\u003e\n  \u003cli\u003eRedirects grease into the drip tray to reduce flare-ups\u003c\/li\u003e\n  \u003cli\u003eHelps distribute heat more evenly over the burners\u003c\/li\u003e\n  \u003cli\u003eProtects burners from corrosive grease and food particles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe bars are made from steel with a porcelain enamel coating to resist rust and retain a cleanable surface. Porcelain-coating increases corrosion resistance compared with bare steel but will chip if scraped aggressively, so handle and install carefully. Regular cleaning and avoiding metal scraping tools will prolong their usable life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCore: steel for structural strength\u003c\/li\u003e\n  \u003cli\u003eSurface: porcelain enamel for rust resistance and easier cleaning\u003c\/li\u003e\n  \u003cli\u003eSold in a set of five identical 22.5\" bars for multi-burner grills\u003c\/li\u003e\n  \u003cli\u003eAvoid abrasive tools; use soft brushes or nylon pads for maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain these replacement bars?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: remove the old bars and slide the new ones into the same slots, aligning ends with the grill frame. Maintenance is simple—brush off residues after cooling and consider periodic deeper scrubs with warm soapy water. Replace any bar that shows severe chipping or exposed steel to prevent accelerated corrosion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove old bars, clean mounting area, slide new bars into place\u003c\/li\u003e\n  \u003cli\u003eAllow grill to cool fully before handling parts\u003c\/li\u003e\n  \u003cli\u003eClean with mild detergent and non-abrasive brush or pad\u003c\/li\u003e\n  \u003cli\u003eReplace bars in sets to keep even heat and appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Grill owners with compatible Weber Genesis, Spirit or Weber 900 models who need a like-for-like replacement to restore burner protection, reduce flare-ups and recover vaporized flavor. Ideal for users who want a cost-effective set of five porcelain-coated steel bars and who will check their bar length and mounting pattern before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these flavorizer bars fit my Weber Spirit E-310?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these 22.5\" Votenli bars list compatibility with Spirit E-310 models; confirm your current bar length before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean porcelain-coated flavorizer bars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: After cooling, wipe or brush with warm soapy water and a non-abrasive pad; avoid metal scraping to prevent chipping.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56832148013396,"sku":"B07BZLTPF7","price":75.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-5-pack_eca7f39f-ecd2-4ca2-aa08-40e488fefdcb.jpg?v=1787023709"},{"product_id":"votenli-gas-grill-replacement-kit-3-pack-15-1-16-stainless-steel-heat-plates-with-burners-adjustable-crossover-tubes","title":"Votenli Gas Grill Replacement Kit 3-Pack 15 1\/16\" Stainless Steel Heat Plates with Burners \u0026 Adjustable Crossover Tubes","description":"\u003cp\u003e\u003cstrong\u003eVotenli S9116A\/S1678A replacement kit supplies three stainless-steel heat plates, matching crossover tubes and burners sized to fit many Charbroil gas grills for reliable even heat and easy installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplacing worn or rusted components keeps a gas grill cooking safely and efficiently. This Votenli kit includes three 15 1\/16\" stainless-steel heat plates, compatible crossover tubes adjustable from 5\" to 9.5\", and burners sized to match common Charbroil models such as 463722313, 463722314 and 463742111. Materials and dimensions are provided so you can confirm fit before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these parts restore my grill's performance?\u003c\/h3\u003e\n\n\u003cp\u003eOld heat plates and burners let grease drip directly onto flames, causing uneven heat and flare-ups. Replacing them restores the barrier that vaporizes drippings into flavoring smoke and evens heat distribution across the grates. Stainless-steel construction resists corrosion better than painted or thin metal replacements.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThree 15 1\/16\" heat plates protect burners and promote even cooking.\u003c\/li\u003e\n  \u003cli\u003eBurner dimensions 14 7\/8\" x 1\" match the original layout for consistent flame patterns.\u003c\/li\u003e\n  \u003cli\u003eAdjustable crossover tubes (5\"–9.5\") bridge gas flow where needed for proper ignition.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these parts fit my Charbroil grill model?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit is designed to fit a range of Charbroil models including 463722313, 463722314, 463742111 and several related numbers. Because grill models and revisions vary, we strongly recommend measuring your existing parts to ensure a match before purchase. The listing includes precise dimensions to make comparison straightforward.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeat plate size: 15 1\/16\" x 3 15\/16\" for direct comparison with originals.\u003c\/li\u003e\n  \u003cli\u003eBurner size: 14 7\/8\" x 1\" to align with factory burner slots.\u003c\/li\u003e\n  \u003cli\u003eCrossover tubes extend 5\" to 9.5\", accommodating different spacing needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and maintenance should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThese components are made from stainless steel to slow corrosion and simplify cleaning compared with untreated metal parts. Regular wiping after use and occasional deep cleaning will help prevent grease buildup and prolong service life. Inspect parts annually for blockages, rust, or flame irregularities and replace when performance degrades.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDurable stainless-steel heat plates resist rust and withstand high grill temperatures.\u003c\/li\u003e\n  \u003cli\u003eWipe off grease after each use; soak in hot soapy water for thorough cleaning.\u003c\/li\u003e\n  \u003cli\u003eVisual inspections and simple clearances keep burners firing efficiently.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation for home mechanics?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation typically requires only basic tools and moderate DIY skill: remove the cooking grates, lift out the old plates and burners, slide in the new parts, and reconnect any crossover tubes as needed. Follow the grill manufacturer's instructions for burner alignment and gas safety checks. If you are unsure, a quick consult with a local grill technician ensures correct setup.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSimple swap: remove grates, old plates and burners, then insert replacements.\u003c\/li\u003e\n  \u003cli\u003eTools: common hand tools like screwdrivers or pliers are usually sufficient.\u003c\/li\u003e\n  \u003cli\u003eSafety tip: perform a leak and ignition test before first use after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: this Votenli replacement kit is intended for grill owners who need a complete set of heat plates, crossover tubes and burners to restore cooking consistency on compatible Charbroil gas grills. It's a practical option for DIY repairers, rental-property maintainers, and anyone upgrading corroded factory parts with stainless-steel replacements for longer life and easier cleaning.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these parts fit Charbroil model 463722313?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit lists compatibility with Charbroil 463722313, but measure your original parts and compare dimensions before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the kit myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most users can install with basic tools; follow safety checks and perform an ignition test after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56832258605396,"sku":"B07QXCW9RV","price":69.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-heat-plate-kit.jpg?v=1787025743"},{"product_id":"votenli-stainless-steel-grill-cooking-grid-replacement-19-75x27-full-size-7mm-rod-1-pack","title":"Votenli Stainless Steel Grill Cooking Grid Replacement 19.75x27 Full-Size 7mm Rod 1-Pack","description":"\u003cp\u003e\u003cstrong\u003eVotenli S65051 is a full-size 19 3\/4\" x 27\" stainless steel replacement cooking grid made to directly replace worn or damaged grates on many Chargriller and King models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a grill's cooking surface corrodes, warps, or no longer fits, swapping in a precisely sized replacement grid restores even heat contact and easy food release. The Votenli S65051 grate is manufactured from thicker 7mm stainless steel for increased rigidity and longer life compared with many aftermarket 5mm options. It ships as a single full-size piece intended for compatible Chargriller and King grills — check your model list and measure your original grate to confirm fit before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Chargriller and King models does this grate work with?\u003c\/h3\u003e\n\u003cp\u003eThis Votenli cooking grid lists broad compatibility with numerous Chargriller and King units. It is designed to fit full-size cookboxes on popular models, including Chargriller 2121, 2123, 2222, 2828, 3001, 3008, 3030, 3072, 3232, 3725, 4000, 4001, 4008, 4208, 5050, 5072, 5252, 5650 and 9020, plus King 3008 and King 5252. Always measure the old grate to ensure a match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact external dimensions: 19 3\/4\" x 27\" (full-size panel)\u003c\/li\u003e\n  \u003cli\u003eFits both gas and charcoal compatible models listed by manufacturer\u003c\/li\u003e\n  \u003cli\u003eIntended as a drop-in replacement where the original grate is the same size\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 7mm stainless steel construction affect performance?\u003c\/h3\u003e\n\u003cp\u003eThicker 7mm stainless steel provides more structural strength, improved heat retention, and reduced flex compared with thinner 5mm aftermarket grates. That added mass helps maintain even searing lines and resists warping from repeated high-heat cooking cycles. Stainless composition also offers corrosion resistance and easier cleanup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e7mm rod thickness for increased rigidity and longevity\u003c\/li\u003e\n  \u003cli\u003eStainless surface resists rust and reduces sticking\u003c\/li\u003e\n  \u003cli\u003eBetter heat retention for more consistent searing across the surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying to ensure a correct fit?\u003c\/h3\u003e\n\u003cp\u003eMeasure the usable cooking area of your grill from inside lip to inside lip and front to back to confirm the 19 3\/4\" x 27\" size matches. Verify whether your original grate is a single full-size panel or a set of smaller panels — this listing is for one full-size piece. Also confirm the model numbers listed for compatibility and check whether any secondary components (clips, ledges) are needed for installation on your specific grill.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure actual inner cookbox width and depth before ordering\u003c\/li\u003e\n  \u003cli\u003eConfirm your model appears on the compatibility list in the product details\u003c\/li\u003e\n  \u003cli\u003eOne-piece grate — not a multi-panel set; check if your grill used multiple pieces originally\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the Votenli replacement grid?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a simple drop-in: remove the old grate, clean the cookbox, and set the replacement into the same support ledges. For maintenance, burn off heavy residue, brush with a nylon or stainless brush, and wipe with oil to help prevent sticking and corrosion between uses. Avoid harsh chemical cleaners that can dull the stainless finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple drop-in replacement — use existing grate supports\u003c\/li\u003e\n  \u003cli\u003eClean after each use: burn off residue, brush, and oil lightly\u003c\/li\u003e\n  \u003cli\u003eStore dry when not in use to extend service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Votenli S65051 19 3\/4\" x 27\" stainless steel cooking grid is intended for grill owners who need a robust, full-size replacement grate for Chargriller or King models. It's a good choice for people who prefer thicker, more rigid stainless steel grates for consistent searing and longer service life, and for anyone replacing a single-panel grate that matches the listed dimensions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a single grate or a set of multiple panels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This listing is for one full-size cooking grate (19 3\/4\" x 27\"), not a multi-panel set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the grate fit my Chargriller 5050 Duo model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the S65051 is listed to fit Char-Griller Duo 5050, but confirm your cookbox inner dimensions before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56834229109076,"sku":"B0FYPN8G5G","price":121.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-view-cooking-grid_f2dd019e-3218-4f1a-86fc-9b2322231ebc.jpg?v=1787048274"},{"product_id":"votenli-19-1-4-stainless-steel-wire-cooking-grates-replacement-3-pack-oem-fit-for-brinkmann-jennair-nexgrill","title":"Votenli 19 1\/4\" Stainless Steel Wire Cooking Grates Replacement 3-Pack — OEM Fit for Brinkmann, JennAir, Nexgrill","description":"\u003cp\u003e\u003cstrong\u003eVotenli S591SC replacement cooking grids are 19 1\/4\" stainless-steel wire grates sold as a 3-pack designed to restore even cooking and reliable support for compatible Brinkmann, Charmglow, JennAir, Nexgrill and Kirkland grill models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement cooking grids give worn or rusted grates a straightforward upgrade without the need to buy a whole new grill. Each wire grate measures 19 1\/4\" x 10 3\/8\" and the three combined cover 19 1\/4\" x 31 1\/8\", matching OEM fitments for a long list of part numbers across brands. Made from stainless steel, they resist corrosion and are shaped to fit several popular models from Nexgrill, Brinkmann, Charmglow, JennAir, Ducane, Kenmore, Kirkland (Members Mark), and more. Before ordering, compare your original grate’s dimensions and mounting style to ensure perfect compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhich grills and part numbers does this Votenli set fit?\u003c\/h3\u003e\n\u003cp\u003eThese grates are intended as direct replacements for many common 19 1\/4\" models and cross-reference a wide range of OEM part numbers across multiple brands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Nexgrill part numbers including 720-0025, 720-0337, 720-0432, 720-0512 and variants.\u003c\/li\u003e\n  \u003cli\u003eFits Brinkmann and Charmglow models such as 810-8500-S, 720-0536, 720-0578 and related part lists.\u003c\/li\u003e\n  \u003cli\u003eAlso matches JennAir, Ducane, Kenmore, Kirkland\/Members Mark and Tuscany part numbers listed in product details.\u003c\/li\u003e\n  \u003cli\u003eDimensions: each grate 19 1\/4\" x 10 3\/8\"; three grates together 19 1\/4\" x 31 1\/8\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will these stainless-steel wire grates change my cooking routine?\u003c\/h3\u003e\n\u003cp\u003eSwapping in fresh stainless-steel wire grids improves heat contact and restores stable support for food, which helps produce more consistent searing and even cooking across the rack. Stainless steel is also straightforward to clean and stands up better to outdoor conditions than untreated metals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores direct heat transfer where old grates were warped or pitted.\u003c\/li\u003e\n  \u003cli\u003eSmoother finish reduces sticking and makes brushing easier.\u003c\/li\u003e\n  \u003cli\u003eStainless construction slows rust formation versus plain steel.\u003c\/li\u003e\n  \u003cli\u003eThree-piece layout keeps replacements modular for partial swaps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering to ensure a proper fit?\u003c\/h3\u003e\n\u003cp\u003eMeasure your existing cooking surface and compare mounting notches, spacing, and the overall 19 1\/4\" x 10 3\/8\" size per grate. Many grill models look similar but differ in grill lip depth or locating tabs, so a quick verification avoids returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure length and depth of each grate and total usable grill width.\u003c\/li\u003e\n  \u003cli\u003eCompare any locating tabs or corner shapes against photos\/specs.\u003c\/li\u003e\n  \u003cli\u003eConfirm the three-grate total (19 1\/4\" x 31 1\/8\") fits your cooking area.\u003c\/li\u003e\n  \u003cli\u003eCross-check the listed compatible part numbers with your owner’s manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I care for and install these Votenli replacement grates?\u003c\/h3\u003e\n\u003cp\u003eInstallation is usually a simple lift-and-set if your grill uses the same grate dimensions and supports; no tools are required in most cases. For care, routine brushing after each use and occasional deep cleaning will keep the stainless finish performing well.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall by seating each 19 1\/4\" grate into the grill ledges or tabs as the originals did.\u003c\/li\u003e\n  \u003cli\u003ePreheat the grill and burn off residue, then brush with a stainless-steel brush.\u003c\/li\u003e\n  \u003cli\u003eFor heavy buildup, soak and scrub with a non-abrasive cleaner safe for stainless steel.\u003c\/li\u003e\n  \u003cli\u003eStore the grill covered in damp climates to extend life span.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Grilling enthusiasts or homeowners with compatible Nexgrill, Brinkmann, Charmglow, JennAir, Kirkland or similar gas grills who need a reliable, cost-effective replacement for worn cooking grids. This 3-pack suits anyone who wants to refresh an older grill’s cooking surface, replace a missing section, or keep a spare set for high-use seasons; just double-check your grill’s measurements and listed part numbers before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these grates fit my Nexgrill or Brinkmann model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many Nexgrill and Brinkmann models—compare your original part number and the 19 1\/4\" x 10 3\/8\" grate size to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these stainless-steel grates dishwasher safe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are stainless steel but not recommended for dishwashers; hand-clean with warm soapy water or grill brush for best results.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56834412085588,"sku":"B07DKQL45Z","price":124.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-grates_5d35cab2-4c85-4444-8b51-52a654449217.jpg?v=1787050048"},{"product_id":"votenli-19-stainless-steel-grill-grates-2-pack-s6666b-replacement-for-brinkmann-charbroil-corrosion-resistant-easy-clean","title":"Votenli 19\" Stainless Steel Grill Grates 2-Pack — S6666B Replacement for Brinkmann, Charbroil; Corrosion-Resistant, Easy-Clean","description":"\u003cp\u003e\u003cstrong\u003eThese Votenli S6666B replacement cooking grids are a 2-pack of 19\" stainless-steel grill grates designed to restore even cooking and durability to compatible Brinkmann, Charbroil, Broil-Mate, Bakers \u0026amp; Chefs and other gas grills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your original grill grates are warped, rusted, or missing, the Votenli S6666B pair offers a direct, heavy-duty replacement sized at 19\" x 12.5\" (each) or 19\" x 25\" overall. Constructed from stainless steel for corrosion resistance and easy cleaning, these grids fit a long list of models across multiple brands, making them a versatile swap-in for many mid-size gas grills. Before ordering, measure your existing grate dimensions to ensure a correct fit.\u003c\/p\u003e\n\n\u003ch3\u003eWill these grates fit my Brinkmann or Charbroil grill?\u003c\/h3\u003e\n\u003cp\u003eVotenli lists broad compatibility with many Brinkmann, Charbroil and related model numbers. Cross-reference the model numbers of your grill and your current grate before purchasing to confirm fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with numerous Brinkmann models (200 series, Pro Series, and specific part numbers like 810-2200, 810-2300, 810-2400, etc.).\u003c\/li\u003e\n  \u003cli\u003eMatches Charbroil model ranges including 46322xx and related part variants.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Broil-Mate, Grill Pro, Bakers \u0026amp; Chefs ST1017-012939, Members Mark, Grill Chef and others listed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and material of these cooking grids?\u003c\/h3\u003e\n\u003cp\u003eEach grate in the 2-pack measures 19 inches by 12.5 inches; together they cover a 19\" x 25\" cooking area. They are made from stainless steel to resist rust and handle high grill temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle grate: 19\" x 12.5\"; full coverage when paired: 19\" x 25\".\u003c\/li\u003e\n  \u003cli\u003eStainless-steel rods and frame for corrosion resistance and simple cleaning.\u003c\/li\u003e\n  \u003cli\u003eSolid construction intended for direct grilling of meats, vegetables and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these grates affect performance and maintenance?\u003c\/h3\u003e\n\u003cp\u003eReplacing damaged or worn grates with these stainless-steel replacements restores stable cooking surfaces and more even heat contact. Stainless steel cleans with a brush and mild detergent and is less prone to flaking than poorly coated alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores a level cooking surface for better sear marks and consistent cook times.\u003c\/li\u003e\n  \u003cli\u003eEasy upkeep: brush after use and wash with warm, soapy water as needed.\u003c\/li\u003e\n  \u003cli\u003eResists rust longer than untreated metal; ideal for occasional maintenance oiling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Grill owners who need a reliable, affordable grate replacement for mid-sized gas grills will find the Votenli S6666B pair useful. This product is suited to DIY-minded users restoring older grills, people replacing corroded or warped factory grates, and owners of any compatible models listed in the compatibility notes. If you value a stainless-steel cooking surface that cleans easily and fits many Brinkmann, Charbroil, Broil-Mate, Grill Pro, Bakers \u0026amp; Chefs, and similar grills, these replacement grids are a practical choice. Remember to measure your current parts and compare model numbers before ordering to ensure a proper fit.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these grates fit my Brinkmann model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many Brinkmann models listed in the compatibility notes; measure your original grate and compare model numbers first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material are the grates made of?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The grates are stainless steel for better rust resistance and straightforward cleaning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56834415853908,"sku":"B07DH8642S","price":109.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-grates_e77025c7-7eb6-4e23-8362-74ec1e36e927.jpg?v=1787050131"},{"product_id":"votenli-stainless-steel-grill-grates-3-pack-18-1-8-x-30-in-304-stainless-easy-clean-replacement-for-char-broil-cuisinart","title":"Votenli Stainless Steel Grill Grates 3-Pack 18 1\/8 x 30 in — 304 Stainless, Easy-Clean Replacement for Char-Broil \u0026 Cuisinart","description":"\u003cp\u003e\u003cstrong\u003eThese Votenli S6599C replacement cooking grid grates are a 3-piece set of 18 1\/8\" stainless-steel grill grates designed to fit many Char-Broil, Cuisinart and compatible gas grill models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your original grill cooking grids are warped, rusted or missing, this set offers corrosion-resistant 304 stainless steel construction, exact-size fitment and a three-piece layout that restores your cooking surface quickly. The set replaces a variety of factory part numbers across Char-Broil, Cuisinart, Kenmore and other compatible outdoor grill lines. It’s sold as three connected sections that together create an 18 1\/8 x 30 inch cooking area, with individual pieces sized at 18 1\/8 x 10 inches for easy handling.\u003c\/p\u003e\n\n\u003ch3\u003eWhich grill models and part numbers do these grates fit?\u003c\/h3\u003e\n\u003cp\u003eThe Votenli S6599C is engineered to be compatible with a broad list of models from Char-Broil, Cuisinart and several other brands. Confirm fit by measuring your existing cooking grids or checking the manufacturer part numbers listed below.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChar-Broil models: 463224912, 463231711, 463247209, 463247310, 463247512, 463248208, 463262812 and others.\u003c\/li\u003e\n  \u003cli\u003eCuisinart matches: 85-3060-6, 85-3061-4, 85-3086-6, 85-3087-4 and Gourmet Infrared Pro 900 variants.\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Kenmore, Tuscany CS784LP and outdoor gourmet models listed in the product details.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and easy to maintain are these stainless-steel grates?\u003c\/h3\u003e\n\u003cp\u003eConstructed from 304 stainless steel, these grates resist rust and stand up to frequent grilling and high heat better than plain steel. The smooth stainless surface simplifies cleaning and reduces residue build-up compared with older, pitted cast grates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless composition for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eSimple wipe-down after use; can be scrubbed with mild detergents.\u003c\/li\u003e\n  \u003cli\u003eThree-piece design lets you lift and clean each section individually.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and how does the three-piece layout help?\u003c\/h3\u003e\n\u003cp\u003eEach piece measures roughly 18 1\/8 x 10 inches, creating a combined cooking surface about 18 1\/8 x 30 inches. The segmented design eases removal for cleaning, transport and replacement of only one section if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndividual piece: 18 1\/8 x 10 inches for easy handling.\u003c\/li\u003e\n  \u003cli\u003eTotal assembled size: 18 1\/8 x 30 inches of cooking area.\u003c\/li\u003e\n  \u003cli\u003eThree-piece layout reduces weight and simplifies installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm I’m ordering the correct replacement grates?\u003c\/h3\u003e\n\u003cp\u003eMeasure your original cooking grid length and width before ordering and compare with the listed dimensions. Check your grill’s model number against the compatibility list in the product details to ensure fitment, and contact the seller with photos if you’re unsure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure existing grate length\/width to match 18 1\/8 x 10 inch sections.\u003c\/li\u003e\n  \u003cli\u003eReference factory part numbers included in the product description.\u003c\/li\u003e\n  \u003cli\u003eReach out to seller support with pictures if fit verification is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this set is for: Grill owners who need a durable, easy-to-clean replacement cooking surface for mid-size gas grills from Char-Broil, Cuisinart and compatible brands. This three-piece stainless-steel set matches several factory part numbers and suits users who prefer corrosion-resistant materials, straightforward maintenance and modular handling. If you value a near-stainless finish, long-term rust resistance and an exact-size replacement for your grill, the Votenli S6599C 3-pack is built to restore your grill’s cooking area quickly and reliably.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these grates fit my Char-Broil 463247310 grill?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Votenli S6599C list includes Char-Broil 463247310; measure your existing grate to confirm 18 1\/8 x 10 inch sections match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I clean these grates in the dishwasher?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Hand washing with warm soapy water and a nonabrasive brush is recommended; dishwasher use is not advised to preserve finish.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56834418803028,"sku":"B07DGYL31C","price":121.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-grates_03cd666b-a0bd-43b8-9d1a-da2b5bc6d400.jpg?v=1787050167"},{"product_id":"votenli-17in-stainless-steel-grill-burners-17-1-8in-heat-plates-8-pack-corrosion-resistant","title":"Votenli 17in Stainless Steel Grill Burners \u0026 17-1\/8in Heat Plates (8-Pack) - Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eVotenli replacement kit supplies eight 17\" stainless-steel burners and eight matching 17 1\/8\" heat plates engineered to restore even heat distribution and reliable performance to compatible Bakers \u0026amp; Chefs and Members Mark grills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your grill cooking like new by replacing worn or damaged components with this comprehensive Votenli set. Each kit includes eight stainless-steel tubular burners and eight stainless-steel heat plates sized to match common factory parts. Designed to fit specific models, the set is a practical repair option that helps avoid costly OEM part delays and gets your outdoor cooker back in service quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWill these parts fit my grill model?\u003c\/h3\u003e\n\u003cp\u003eThese Votenli replacements are made to match the dimensions and mounting of several popular grill models. Check your grill's part numbers and measure the existing pieces before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Bakers \u0026amp; Chefs: GR2039201-BC-00, GD430, ST1017-012939\u003c\/li\u003e\n  \u003cli\u003eAlso fits Grill Chef BIG-8116 and Bakers \u0026amp; Chefs ST1017-01 variants\u003c\/li\u003e\n  \u003cli\u003eWorks with Members Mark models GR2039201-MM-00, M3206ALP, M3206ANG\u003c\/li\u003e\n  \u003cli\u003eVerify burner and heat plate lengths to match your original parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are the dimensions and materials specified?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses corrosion-resistant stainless steel for both the burners and heat plates, sized to align with factory replacements. Accurate dimensions ensure simple installation and proper flame coverage across the cooking surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBurner dimensions: 17\" length by 1 1\/8\" diameter\u003c\/li\u003e\n  \u003cli\u003eHeat plate dimensions: 17 1\/8\" length by 4 7\/8\" width\u003c\/li\u003e\n  \u003cli\u003eMaterial: durable stainless steel for heat and weather resistance\u003c\/li\u003e\n  \u003cli\u003eIncluded quantity: 8 burners and 8 heat plates per kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and maintenance should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward if you are comfortable replacing grill components; basic hand tools are usually enough. Clean contact areas, confirm gas and electric isolation, and follow your grill manual for safe reassembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off gas and disconnect fuel source before starting\u003c\/li\u003e\n  \u003cli\u003eRemove old burners and heat plates; compare sizes to the new parts\u003c\/li\u003e\n  \u003cli\u003eUse common hand tools to secure replacements and test for proper flame\u003c\/li\u003e\n  \u003cli\u003eWipe down stainless steel regularly to prevent buildup and prolong life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Grill owners and repairers who need a reliable, full-set replacement for failing burners and heat plates will find this Votenli kit practical and cost-effective. It suits DIY handypeople, barbecue service technicians, and anyone restoring compatible Bakers \u0026amp; Chefs, Members Mark, or Grill Chef models. If your current burners show holes, inconsistent flames, or uneven cooking, and your heat plates are warped or corroded, this eight-pack gives you a complete swap to restore performance. Before purchasing, compare the listed model numbers and measure your existing parts to ensure a proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these burners fit Bakers \u0026amp; Chefs ST1017-012939?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this Votenli set is compatible with Bakers \u0026amp; Chefs ST1017-012939; confirm dimensions before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many pieces are included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit contains eight stainless-steel burners and eight stainless-steel heat plates.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56834452521300,"sku":"B07QD88BZC","price":111.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-grill-parts.jpg?v=1787050465"},{"product_id":"votenli-replacement-grill-heat-plates-burners-3-pack-17-75-stainless-heat-plates-15-81-cast-iron-burners-for-jenn-air-nexg","title":"Votenli Replacement Grill Heat Plates \u0026 Burners 3-Pack — 17.75\" Stainless Heat Plates + 15.81\" Cast Iron Burners for Jenn Air\/Nexg","description":"\u003cp\u003e\u003cstrong\u003eVotenli replacement set includes three 17 3\/4” stainless steel heat plates and three 15 13\/16” cast iron burners engineered to restore even heat distribution and reliable performance to compatible Jenn Air and Nexgrill gas grills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your grill has uneven flame, flare-ups, or rusted components, replacing worn heat plates and burners is the fastest way to get predictable cooking heat back. This Votenli kit matches common Jenn Air and Nexgrill OEM part numbers and supplies both the stainless steel heat tents and the cast iron burners needed for a complete mid-to-upper-bay refresh. Dimensions and materials are listed so you can confirm fit before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWill these parts fit my Jenn Air or Nexgrill model?\u003c\/h3\u003e\n\u003cp\u003eThese components are made to replace the common factory items used in multiple Jenn Air and Nexgrill models. Verify fit by comparing your existing heat plate and burner dimensions and the listed compatible model numbers before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Jenn Air models include: 720-0061 (note: did not fit 720-0061LP), 720-0062, 720-0063, 720-0099, 720-0100, 720-0101, 720-0138, 720-0139, 720-0141 and others.\u003c\/li\u003e\n  \u003cli\u003eCompatible Nexgrill models share many of the same part numbers such as 720-0142, 720-0150, 720-0164, 720-0165, 720-0171, 720-0671.\u003c\/li\u003e\n  \u003cli\u003eOriginal OEM references include 80001254, 80000431, CIJA, NGCHP2 for cross-checking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the size and material details I need to know?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies three stainless steel heat plates and three cast iron burners, each sized to fit the mid-bay of the compatible grills. Knowing the exact dimensions helps ensure a correct swap and consistent burner alignment with your cook grates and gas ports.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat plates: 17 3\/4” long x 6 3\/8\" wide, stainless steel construction for corrosion resistance and reflective heat dispersion.\u003c\/li\u003e\n  \u003cli\u003eBurners: 15 13\/16” long x 2 3\/16\" diameter profile, made from cast iron to retain heat and provide steady flame.\u003c\/li\u003e\n  \u003cli\u003eSet composition: 3 cast iron burners + 3 stainless steel heat tents included in one package.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will replacing these parts affect grilling performance?\u003c\/h3\u003e\n\u003cp\u003eFresh burners and heat plates restore flame stability, reduce hot spots and minimize flare-ups caused by grease dripping directly onto flames. The stainless heat plates deflect and vaporize drippings to evenly distribute heat and limit direct contact between grease and flame.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother, more consistent temperature across the cooking surface for even searing and baking.\u003c\/li\u003e\n  \u003cli\u003eReduced flare-ups improve food safety and help prevent scorched or unevenly cooked food.\u003c\/li\u003e\n  \u003cli\u003eCast iron burners deliver steady heat retention and a robust flame pattern for longer cook cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installation and how is after-sales handled?\u003c\/h3\u003e\n\u003cp\u003eMeasure your current components and compare bolt patterns and lengths to avoid returns. Votenli asks customers to confirm sizes and models before purchase and offers support if parts arrive damaged or don’t match expectations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare heat plate and burner dimensions to your originals for proper fit.\u003c\/li\u003e\n  \u003cli\u003eInspect for matching mounting holes and gas port alignment during dry fit before final installation.\u003c\/li\u003e\n  \u003cli\u003eContact Votenli support for replacements or troubleshooting if parts appear incorrect or damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Grill owners who need reliable replacement parts to restore a Jenn Air or Nexgrill grill’s core heating components — particularly DIY technicians, backyard cooks wanting consistent searing and homeowners replacing corroded or warped burners and heat tents. If you maintain a gas grill and can verify model compatibility and dimensions, this Votenli 3-pack set supplies the main components needed to get your grill back to even heat and dependable performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fit Jenn Air 720-0061 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many Jenn Air 720-0061 units, but not the 720-0061LP variant. Measure your original parts to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What materials are the parts made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes stainless steel heat plates and cast iron burners for corrosion resistance and heat retention.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56834455109972,"sku":"B0814K32FZ","price":126.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-heat-plates-burners_21140fca-596f-4271-aacd-a432122cca07.jpg?v=1787050486"},{"product_id":"votenli-grill-heat-plates-burners-8-piece-kit-4-stainless-plates-4-cast-iron-burners-17-75-15-81-oem-fit","title":"Votenli Grill Heat Plates \u0026 Burners (8-Piece Kit: 4 Stainless Plates + 4 Cast-Iron Burners) 17.75\"\/15.81\" OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eVotenli’s C2630A (4-pack) stainless steel heat plates and S9123A (4-pack) cast iron burners replace worn components on compatible Jenn Air and Nexgrill gas grills to restore even heat and protect burners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Jenn Air or Nexgrill grill is producing uneven flames, hot spots, or grease flare-ups, replacing the heat tents (heat plates) and cast-iron burners can bring back steady cooking performance. This kit bundles four stainless steel heat plates and four cast-iron burners sized to match the OEM fit for several popular Jenn Air and Nexgrill models, using original part references for straightforward swap-outs.\u003c\/p\u003e\n\n\u003ch3\u003eWhich grill models and part numbers does this kit replace?\u003c\/h3\u003e\n\u003cp\u003eThis replacement set is designed to fit a long list of Jenn Air and Nexgrill models so you can confidently match it to your grill. It corresponds to multiple original part references, making cross-checking easy before purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible Jenn Air models include: 720-0062, 720-0063, 720-0099, 720-0100, 720-0101, 720-0138, 720-0139, 720-0141, 720-0142, 720-0150, 720-0164, 720-0165, 720-0171.\u003c\/li\u003e\n\u003cli\u003eCompatible Nexgrill models include: 720-0061, 720-0062, 720-0063, 720-0099, 720-0100, 720-0101, 720-0138, 720-0139, 720-0141, 720-0142, 720-0150, 720-0164, 720-0165, 720-0171, 720-0671.\u003c\/li\u003e\n\u003cli\u003eCross-referenced original part numbers: 80001254, 80000431, CIJA, NGCHP2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the materials and dimensions, and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe heat plates are made from stainless steel to resist corrosion and divert grease away from burners, while the burners themselves are cast iron for strong heat retention and durability. Correct dimensions ensure proper alignment with burner ports and gas flow for safe, efficient cooking.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeat plates: stainless steel, 17 3\/4” x 6 3\/8\".\u003c\/li\u003e\n\u003cli\u003eBurners: cast iron, 15 13\/16” x 2 3\/16\".\u003c\/li\u003e\n\u003cli\u003eMaterials chosen to balance rust resistance (plates) and long-term heat stability (cast-iron burners).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a straightforward mechanical swap for most users familiar with grill maintenance, requiring basic hand tools and a clean workspace. Always confirm the original part sizes against this kit before beginning, and follow safety steps like shutting off gas and cooling the grill fully.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurn off gas and disconnect propane or gas line before starting.\u003c\/li\u003e\n\u003cli\u003eRemove grates and old heat plates, then slide out existing burners and replace with matching cast-iron units.\u003c\/li\u003e\n\u003cli\u003eReinstall heat plates and grates, then test-light burners following grill maker guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat ongoing benefits and maintenance can I expect after replacement?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn burners and heat plates restores even heat distribution, reduces flare-ups, and protects burners from dripping grease. Regular cleaning and periodic inspection will keep the components working longer and maintain consistent cooking results.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCleaner flame pattern and more uniform grilling surface.\u003c\/li\u003e\n\u003cli\u003eReduced flare-ups thanks to properly angled heat plates diverting grease.\u003c\/li\u003e\n\u003cli\u003eSimple upkeep: scrape plates after cooking and brush cast-iron burners to remove debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Votenli replacement kit is intended for owners of compatible Jenn Air and Nexgrill gas grills who need a full set of burners and heat plates to restore performance. It’s ideal for homeowners who want OEM-sized parts, DIYers comfortable with basic grill repairs, and service professionals replacing multiple components at once. Before ordering, measure your existing parts and compare model numbers to ensure a correct match; contact our support if you need help identifying fitment or have any issues after delivery.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these parts fit my Jenn Air 720-0101 grill?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this kit lists compatibility with Jenn Air model 720-0101; confirm by measuring your current plate and burner sizes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are tools required to install the burners and plates?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools are recommended; installation is a simple swap but ensure gas is off and the grill is cool.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56834462679380,"sku":"B0814KPMD5","price":133.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packed-kit.jpg?v=1787050573"},{"product_id":"votenli-cast-iron-replacement-grates-for-weber-q300-q320-q3000-25-x-17-8-in-2-pack-heavy-duty-matte-ready-to-season","title":"Votenli Cast Iron Replacement Grates for Weber Q300\/Q320\/Q3000 25 x 17.8 in (2-Pack) – Heavy-Duty Matte, Ready to Season","description":"\u003cp\u003e\u003cstrong\u003eThese Votenli cast iron cooking grates (2-pack) are direct-fit replacements sized 25 x 17.8 inches for Weber Q300, Q320, Q3000 and Q3200-series grills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Weber Q-series grill grate is warped, worn, or losing its nonstick seasoning, swapping in a matched pair of heavy-duty cast iron grates restores even heat, pronounced sear marks, and durable performance. The Votenli C764F set is designed to match the dimensions of common Weber replacement numbers (7646, 7584 and compatible part codes) and comes as two matte-finish grates ready for seasoning and use.\u003c\/p\u003e\n\n\u003ch3\u003eWill these grates fit my Weber Q300, Q320 or Q3000-series grill?\u003c\/h3\u003e\n\u003cp\u003eYes — the Votenli C764F grates are cut to the 25 x 17.8-inch footprint used by many Q300 and Q3000 family models. Before buying, compare your existing grate’s length, width, and mounting style to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDimensions: 25 x 17.8 x 0.5 inches (L x W x H).\u003c\/li\u003e\n  \u003cli\u003eIntended fit: Weber Q300, Q320, Q3000, Q3200 and listed part numbers 586002, 57060001, 404341.\u003c\/li\u003e\n  \u003cli\u003eReplacement references: compatible with Weber part numbers 7646 and 7584.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do cast iron grates change grilling results?\u003c\/h3\u003e\n\u003cp\u003eCast iron absorbs and holds heat more effectively than thin wire grates, giving stronger sear marks and steadier temperature under direct heat. That retained heat helps brown steaks and create caramelized crusts, while the heavy bars support larger items without sagging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides consistent surface heat for even searing.\u003c\/li\u003e\n  \u003cli\u003eThicker bars resist warping and support heavy cookware or food.\u003c\/li\u003e\n  \u003cli\u003eMatte finish accepts seasoning that improves nonstick behavior over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance keeps these grates rust-free and long-lasting?\u003c\/h3\u003e\n\u003cp\u003eCast iron needs regular care: scrape after each use, reseason with a thin coat of oil, and store the grill covered to limit moisture exposure. Follow simple seasonal steps if you won’t use the grill for months to prevent rust and preserve the seasoned layer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eScrape off food debris after every cook while still warm.\u003c\/li\u003e\n  \u003cli\u003eBrush or wipe a light layer of cooking oil on the grates after cleaning.\u003c\/li\u003e\n  \u003cli\u003eLeave dampers slightly open and keep the lid\/cover on when not in use to reduce condensation.\u003c\/li\u003e\n  \u003cli\u003eFor long storage: heavily oil, bag, and keep inside a covered grill or dry area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these grates include support clips or other accessories?\u003c\/h3\u003e\n\u003cp\u003eThe Votenli pack contains two matte cast iron cooking grates only; support clips and mounting hardware are not included. If your original grill used clips, reuse them from the original parts or source compatible fasteners separately.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: two cast iron grates (no clips\/hardware).\u003c\/li\u003e\n  \u003cli\u003eRecommended: keep original support clips or order manufacturer-specified clips if needed.\u003c\/li\u003e\n  \u003cli\u003eTip: verify mounting points and clearance before installing to ensure a secure fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Home grillers who want to restore or upgrade a Weber Q300\/Q320\/Q3000-series barbecue with heavy-duty cast iron bars that enhance searing, heat retention, and longevity. Choose these Votenli grates if you need a precise-size replacement and are prepared to maintain cast iron by seasoning and regular cleaning. If you require additional mounting clips, plan to reuse existing hardware or purchase compatible fasteners separately; if you need a different size or material, confirm model dimensions before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these grates pre-seasoned?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the Votenli grates are matte cast iron and should be seasoned with oil before first use for best nonstick performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the grates rust if left outside?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They can rust if exposed to moisture; scrape, oil, and use a grill cover or store in dry conditions to prevent rust.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56834464448852,"sku":"B08156N31J","price":121.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-grates_019be0fb-d68b-488b-a99a-bbe9b627a824.jpg?v=1787050592"},{"product_id":"votenli-stainless-steel-grill-grates-replacement-17-3-8-4-pack-direct-fit-for-broil-king-huntington-corrosion-resistant","title":"Votenli Stainless Steel Grill Grates Replacement 17 3\/8\" (4-Pack) — Direct-Fit for Broil King \u0026 Huntington, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eVotenli S6602D is a four-pack of 17 3\/8\" stainless-steel cooking grid grates designed to replace worn or missing grates on multiple Broil King, Huntington, Broil-Mate and Sterling gas grill models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement grates offer a corrosion-resistant, easy-to-clean stainless steel surface sized to match many Baron, Rebel and compatible models. Each grate measures 17 3\/8\" x 6 3\/8\" (total coverage 17 3\/8\" x 25 1\/2\" when all four are installed), making them a direct-fit option for a wide range of grill configurations released since 1992. The set is ideal for restoring even cooking zones and maintaining consistent grilling performance without buying an entirely new cooking system.\u003c\/p\u003e\n\n\u003ch3\u003eWhich grill models will these grates fit?\u003c\/h3\u003e\n\u003cp\u003eThese Votenli replacement grates are manufactured to fit a long list of Broil King and related models, including Baron series and several Huntington and Sterling units. They match factory dimensions so you can swap them in without bending or trimming.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBaron 320, 340, 420, 440, 490 model compatibility.\u003c\/li\u003e\n  \u003cli\u003eMultiple Broil King series from 1992 onward (including many 9211, 9215, 9221, 9225, 9615 and 9625 variants).\u003c\/li\u003e\n  \u003cli\u003eHuntington, Broil-Mate and Sterling models noted for identical grate sizing.\u003c\/li\u003e\n  \u003cli\u003eConfirm original grate dimensions: 17 3\/8\" x 6 3\/8\" per piece before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these stainless-steel grates improve grilling maintenance?\u003c\/h3\u003e\n\u003cp\u003eStainless-steel construction reduces rust risk and simplifies cleanup compared with uncoated or heavily pitted cast iron. The smooth surface sheds food residue and is dishwasher-safe for many home setups, decreasing time spent scrubbing between cooks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant finish extends useful life of cooking surface.\u003c\/li\u003e\n  \u003cli\u003eSmoother bars require less forceful brushing and preserve seasoning on other grate types.\u003c\/li\u003e\n  \u003cli\u003eIndividual-size grates make removal and cleaning one section at a time easy.\u003c\/li\u003e\n  \u003cli\u003eSets of four restore full-width coverage for a consistent heat profile.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and installation tips?\u003c\/h3\u003e\n\u003cp\u003eEach Votenli grate measures 17 3\/8\" long by 6 3\/8\" deep; all four together form a cooking surface 17 3\/8\" by 25 1\/2\". Installation is tool-free: lift out the old sections and drop these into the same ledges, verifying they sit flat and do not rock.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle grate: 17 3\/8\" x 6 3\/8\"; full set: 17 3\/8\" x 25 1\/2\".\u003c\/li\u003e\n  \u003cli\u003eCompare with existing grate before purchase to ensure fit.\u003c\/li\u003e\n  \u003cli\u003ePlace grates on factory ledges; ensure even contact with burners for best heat transfer.\u003c\/li\u003e\n  \u003cli\u003eAllow new stainless steel to season lightly before high-heat searing to prevent sticking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect from product support and quality?\u003c\/h3\u003e\n\u003cp\u003eVotenli provides guidance to confirm correct part selection and stands behind fit and finish. If you have concerns about compatibility or receive damaged pieces, contact Votenli customer service for assistance or replacement options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer recommends measuring originals before ordering.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fit questions or product issues.\u003c\/li\u003e\n  \u003cli\u003eHigh-quality stainless steel construction with attention to dimensional accuracy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Grill owners who need a straightforward, durable replacement for worn or missing cooking grates on Broil King, Huntington, Broil-Mate and Sterling grills will find this four-pack practical and cost-effective. It’s a good choice for backyard cooks who want reliable, rust-resistant grates sized to match factory layouts and for anyone restoring an older grill to dependable working condition without replacing the entire appliance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these grates fit my Baron 420?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 17 3\/8\" x 6 3\/8\" grates are compatible with Baron 420 when your original grate dimensions match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the grates stainless steel and easy to clean?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they are stainless steel for rust resistance and wipe or brush clean easily; sections are removable for deeper cleaning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56834514682196,"sku":"B07J52VTZ9","price":116.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-cooking-grates.jpg?v=1787051095"},{"product_id":"votenli-stainless-steel-grill-grates-replacement-19-1-4-2-pack-17-bar-durable-oem-fit-for-jenn-air-nexgrill","title":"Votenli Stainless Steel Grill Grates Replacement 19-1\/4\" (2-Pack) — 17-Bar Durable OEM Fit for Jenn-Air \u0026 Nexgrill","description":"\u003cstrong\u003eThese Votenli S563SB stainless steel grill grates are a two-piece, direct-fit replacement sized 19-1\/4\" that restores cooking surface and heat distribution for compatible Jenn-Air, Nexgrill and other models.\u003c\/strong\u003e\n\n\u003cp\u003eIf your grill’s original cooking grids are warped, rusted, or missing, the Votenli S563SB 2-pack gives you a precision replacement to get back to even searing and easy cleanup. Each grate measures 19-1\/4\" x 12-15\/16\" (19-1\/4\" x 25-7\/8\" combined) and uses 17 stainless steel bars per grid for improved durability and consistent contact with food. These grates are manufactured to match common OEM fitments across Jenn-Air, Nexgrill, Broil-Mate and other popular brands, letting you replace worn parts without modifying the barbecue.\u003c\/p\u003e\n\n\u003ch3\u003eWhich grill models and part numbers will these grates fit?\u003c\/h3\u003e\n\u003cp\u003eThe Votenli S563SB is designed to fit many common factory part numbers and models, so it’s a practical swap for a range of grills. Compatible listings include Jenn-Air 720-0336 and 720-0163, multiple Nexgrill and Perfect Glo part numbers, and several Broil-Mate, Grill Pro, Uberhaus and Imperial variants. Check the specific model and dimensions to confirm fit before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Jenn-Air: 720-0336, 720-0163\u003c\/li\u003e\n  \u003cli\u003eNexgrill \/ Perfect Glo: 720-0163, 720-0511, 720-0433 and PG-50400S\/PG-50401S families\u003c\/li\u003e\n  \u003cli\u003eAlso matches Broil-Mate, Grill Pro, Uberhaus, Brinkmann and Imperial model lists\u003c\/li\u003e\n  \u003cli\u003eDimensions: each grid 19-1\/4\" x 12-15\/16\"; combined length 19-1\/4\" x 25-7\/8\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does stainless steel improve cooking and maintenance?\u003c\/h3\u003e\n\u003cp\u003eStainless steel construction resists corrosion and tolerates high grill temperatures, so these grates remain functional through repeated heating cycles. The smooth bars provide good searing contact while being easier to brush clean than cast-iron grates without a seasoned finish. Over time stainless bars keep appearance and performance with routine care.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e17 stainless steel bars per grid for strength and even heat transfer\u003c\/li\u003e\n  \u003cli\u003eLess prone to rust than plain steel grates\u003c\/li\u003e\n  \u003cli\u003eSimple to clean with a wire brush or soak-and-scrub method\u003c\/li\u003e\n  \u003cli\u003eDurable finish for consistent sear marks and food release\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the dimensions and installation tips for these replacement grids?\u003c\/h3\u003e\n\u003cp\u003eEach replacement grate measures 19-1\/4\" by 12-15\/16\" and the pair covers the full 19-1\/4\" x 25-7\/8\" cooking area when installed side-by-side. Installation requires no welding or trimming—lift out the old grids and drop these into the factory ledges. If your grill has clips or cross supports, align the bars so the grates sit flat and stable before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndividual grid: 19-1\/4\" x 12-15\/16\"; total coverage: 19-1\/4\" x 25-7\/8\"\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement fit for listed OEM part numbers—verify your model\u003c\/li\u003e\n  \u003cli\u003eInstall by placing onto existing ledges or support rails—no tools typically needed\u003c\/li\u003e\n  \u003cli\u003eSeat both grids evenly to prevent wobble and ensure proper heat zones\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these grates change my grill’s cooking performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing badly corroded or warped grids with the Votenli S563SB pair restores stable cooking surface and more consistent heat contact, often improving searing and reducing hot\/cold spots. While material and thickness affect heat retention differently than cast iron, stainless steel offers fast recovery and easier maintenance for many backyard cooks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores flat, continuous cooking surface for even searing\u003c\/li\u003e\n  \u003cli\u003ePromotes reliable heat transfer across the bar pattern\u003c\/li\u003e\n  \u003cli\u003eMay heat and cool faster than heavy cast-iron grids\u003c\/li\u003e\n  \u003cli\u003eMakes cleanup and post-cook maintenance simpler\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These Votenli S563SB replacement grates suit home grill owners who need a direct-fit, durable stainless steel swap for worn or missing cooking grids. Ideal for people with compatible Jenn-Air, Nexgrill, Broil-Mate, Grill Pro, Uberhaus and similar models who want a long-lasting pair that reinstates full cooking area without modifications. Choose this set if you prefer low-maintenance stainless steel and a straightforward installation to get your grill back to reliable service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these grates fit Jenn-Air 720-0163?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Votenli S563SB is designed to replace Jenn-Air 720-0163 and compatible OEM part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the dimensions of each grate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each grate measures 19-1\/4\" x 12-15\/16\"; the pair covers 19-1\/4\" x 25-7\/8\" total.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56834591097172,"sku":"B07PBQ6NG1","price":114.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-grates_be66a6eb-db48-4e42-8480-89762535a7e2.jpg?v=1787051854"},{"product_id":"votenli-18-stainless-steel-cooking-grates-for-charbroil-performance-s47e-3-pack-corrosion-resistant-searing","title":"Votenli 18\" Stainless Steel Cooking Grates for Charbroil Performance — S47E 3-Pack, Corrosion-Resistant Searing","description":"\u003cstrong\u003eVotenli S47E 18\" stainless steel cooking grates (3-pack) replace original Charbroil Performance 4- and 5-burner grill grates to restore even heat and durable searing.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Charbroil Performance grill models (4-burner: 463376018P2, 463376117, 463377117, 463673617, 463377017, 463347017; 5-burner: 463347519) need replacement cooking surfaces, this Votenli three-piece set recreates the factory footprint with corrosion-resistant stainless steel construction. The kit arrives as one 18\" x 6.5\" piece plus two 18\" x 9.3\" pieces that combine to cover the full 18\" x 25\" cooking area, giving you solid support for grates, steady heat transfer and easier cleanup compared with heavily worn originals.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these grates match my Charbroil Performance model?\u003c\/h3\u003e\n\u003cp\u003eThese Votenli S47E grates are designed to be compatible with the specific Charbroil part numbers listed in the product title. They reproduce the original dimensions and mounting shape so they fit into the same slots and rest points without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for listed 4-burner and 5-burner Charbroil models.\u003c\/li\u003e\n  \u003cli\u003eThree-piece layout: one 18\" x 6.5\" plus two 18\" x 9.3\" pieces totaling 18\" x 25\".\u003c\/li\u003e\n  \u003cli\u003eCheck your grill's part number and measure existing grates before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat material and finish are these grates made from?\u003c\/h3\u003e\n\u003cp\u003eThe grates are fabricated from stainless steel engineered for outdoor cooking to resist rust and retain appearance under high heat. Stainless steel delivers relatively low maintenance and straightforward cleaning compared with uncoated cast iron or lower-grade metals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel construction for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eSmooth surface that simplifies wiping and brushing after use.\u003c\/li\u003e\n  \u003cli\u003eStable under typical grill temperatures and thermal cycling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare and care for these new cooking grids?\u003c\/h3\u003e\n\u003cp\u003eNew stainless steel grates benefit from a simple break-in and routine care to minimize sticking and prolong life. Preheating and brushing, combined with mindful saucing and marinading, will keep grill performance consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePreheat grill to 500–550°F then brush grates with a stainless-steel bristle brush before cooking.\u003c\/li\u003e\n  \u003cli\u003ePat foods dry and add sugary sauces in the last 5–10 minutes to avoid charring and buildup.\u003c\/li\u003e\n  \u003cli\u003eRepeat use and cleaning will reduce initial food sticking as the surface seasons through normal grilling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these grates affect grilling performance or flavor?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn or warped grates with properly fitting stainless steel grids improves heat distribution and contact searing, which can enhance browning and overall cooking consistency. They do not alter the grill’s fuel system or burners, so cooking times remain similar to original equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores even heat and stable cooking surface for better sear marks.\u003c\/li\u003e\n  \u003cli\u003eDoes not change burner output—matches factory layout for consistent results.\u003c\/li\u003e\n  \u003cli\u003eEasy-to-clean stainless finish reduces residue that can impact flavor over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Votenli S47E 3-pack is intended for Charbroil owners who need a direct-fit replacement for worn or missing cooking grates and want an affordable stainless-steel option that improves heat contact and cleanability. It's a practical choice for backyard grillers who prefer to maintain original grill geometry while upgrading to a rust-resistant material—confirm your model number and grate dimensions before purchase to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these grates directly replace my Charbroil part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these Votenli S47E grates are made to fit the specific Charbroil models listed; confirm your model number and measure existing grates before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I prevent food from sticking to new stainless steel grates?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Preheat to 500–550°F, brush grates clean, dry foods before grilling and add sauces in the final 5–10 minutes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56834648244564,"sku":"B089T67RY5","price":116.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-charbroil-fit.jpg?v=1787052429"},{"product_id":"votenli-replacement-grill-burners-14-5-x-6-25-in-3-pack-stainless-steel-direct-fit-for-american-outdoor-grill","title":"Votenli Replacement Grill Burners 14.5 x 6.25 in (3-Pack) Stainless Steel — Direct Fit for American Outdoor Grill","description":"\u003cp\u003e\u003cstrong\u003eVotenli S1246C is a three-pack of 14.5\" x 6.25\" stainless-steel replacement burners made to fit many American Outdoor Grill and select Dyna-Glo models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your grill is producing uneven heat, flare-ups, or weak flame output, worn or damaged burners are often the culprit. The Votenli S1246C replacement burners provide a direct-fit, corrosion-resistant solution engineered to match the burner footprint of American Outdoor Grill 24NB\/24NG\/24NP\/24PC, 30NB\/30PC and 36NB\/36PC models, as well as certain Dyna-Glo units like the DCP480CSP. Sold as a set of three, these stainless-steel burners restore consistent flame distribution and simplify maintenance, so you get dependable cooking performance without having to hunt for model-specific parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these burners improve my grill's performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing old or clogged burners evens out heat across the cooking surface, reduces cold spots, and minimizes flare-ups by keeping gas flow consistent. The stainless-steel construction resists rust and holds up better to high heat cycles than many stamped steel originals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores uniform flame pattern for more consistent cooking\u003c\/li\u003e\n  \u003cli\u003eReduces hotspots and flare-ups for safer grilling\u003c\/li\u003e\n  \u003cli\u003eStainless steel resists corrosion for longer service life\u003c\/li\u003e\n  \u003cli\u003eSet of three provides complete bank replacement for many grills\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the Votenli S1246C fit my grill model without modification?\u003c\/h3\u003e\n\u003cp\u003eThese burners are manufactured to the dimensions commonly used in the listed American Outdoor Grill and compatible Dyna-Glo models, but fitment depends on your original burner size and mount style. Measure and compare the 14.5\" x 6.25\" footprint to your existing burners before purchasing to be certain of compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for American Outdoor Grill 24NB\/24NG\/24NP\/24PC and 30\/36 NB\/PC models\u003c\/li\u003e\n  \u003cli\u003eAlso fits Dyna-Glo DCP480CSP where dimensions match\u003c\/li\u003e\n  \u003cli\u003eCompare the length and width (14.5\" x 6.25\") to your current part\u003c\/li\u003e\n  \u003cli\u003eNo drilling or cutting expected when sizes match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install these replacement burners safely?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for most owners: disconnect propane or natural gas, remove grates and flavorizer bars, slide out the old burners, then align and secure the new units. If you encounter nonstandard mounts or fixed brackets, consult your grill manual or a qualified technician.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShut off fuel supply and cool the grill completely\u003c\/li\u003e\n  \u003cli\u003eRemove grates and heat shields to access burners\u003c\/li\u003e\n  \u003cli\u003eSlide old burners out and align new ones into the same mounting points\u003c\/li\u003e\n  \u003cli\u003eTest for leaks after reconnecting gas using soapy water method\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are these burners made of and how should I maintain them?\u003c\/h3\u003e\n\u003cp\u003eThe S1246C burners are constructed from stainless steel for improved resistance to rust and heat stress. Routine cleaning and occasional inspection of ports will keep flames even and extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: stainless steel for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eClean ports with a soft brush; avoid harsh abrasives\u003c\/li\u003e\n  \u003cli\u003eInspect for warping or blockage seasonally\u003c\/li\u003e\n  \u003cli\u003eReplace if flame pattern remains irregular after cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Votenli S1246C three-pack is ideal for grill owners who own supported American Outdoor Grill or compatible Dyna-Glo models and need a reliable, OEM-sized burner replacement. It's suited to DIYers comfortable with basic disassembly, homeowners restoring older grills, and anyone wanting to improve cooking consistency without replacing the entire grill. Always verify measurements and mounting style against your original parts before ordering to ensure a correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the exact dimensions of the Votenli S1246C burners?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each burner measures 14.5 inches long by 6.25 inches wide; sold as a set of three.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these burners fit American Outdoor Grill 24NB and 36PC models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they’re designed to fit American Outdoor Grill 24NB and 36PC when your original burner dimensions match.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56834778431828,"sku":"B08CHL884C","price":100.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-burner-front-view.jpg?v=1787053562"},{"product_id":"votenli-cast-iron-cooking-grates-19-3-4-4-pack-replacement-for-chargriller-gloss-finish-heavy-duty-heat-retention","title":"Votenli Cast Iron Cooking Grates 19 3\/4\" (4-Pack) Replacement for Chargriller — Gloss Finish, Heavy-Duty Heat Retention","description":"\u003cp\u003e\u003cstrong\u003eThese Votenli C6505A cast iron cooking grates (4-pack) are 19 3\/4\" replacement grids designed to restore even searing and durable heat retention for compatible Chargriller and King Griller gas grills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your original cooking grates are warped, cracked, or missing, this four-piece set offers full-width coverage and the classic cast-iron feel that many grillers prefer. Each grate measures 19 3\/4\" x 6 3\/4\", combining to 19 3\/4\" x 27\" overall, and they’re finished in gloss cast iron for strong heat conduction and attractive grill marks. These replacements fit a wide range of Chargriller and King Griller gas grill models; confirm your model number and grate dimensions before installing.\u003c\/p\u003e\n\n\u003ch3\u003eWhich grill models will these grates fit?\u003c\/h3\u003e\n\u003cp\u003eThese Votenli grates are manufactured to match the footprint of several Chargriller and King Griller models so you can swap them in without modifying the cooking surface. They’re intended as direct replacements for the listed model numbers when dimensions match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Chargriller models: 2121, 2123, 2222, 2828, 3001, 3008, 3030, 3072, 3232, 3725, 4000, 4001, 4008, 4208, 5050, 5072, 5252, 9020.\u003c\/li\u003e\n  \u003cli\u003eCompatible King Griller models: 3008 and 5252.\u003c\/li\u003e\n  \u003cli\u003eEach grate: 19 3\/4\" x 6 3\/4\"; overall coverage: 19 3\/4\" x 27\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these cast iron grates perform compared with other materials?\u003c\/h3\u003e\n\u003cp\u003eCast iron is prized for its ability to hold and radiate heat, producing strong sear marks and steady cooking temperatures. These gloss cast iron grates are heavier and denser than stainless steel wire grates, so they take slightly longer to heat up but release heat evenly across the cooking surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeliver pronounced searing and sustained radiant heat.\u003c\/li\u003e\n  \u003cli\u003eBetter heat retention than thin stainless grates for thicker cuts.\u003c\/li\u003e\n  \u003cli\u003eRequire seasoning and regular cleaning to prevent rust and maintain nonstick behavior.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about unpacking and installing these grates?\u003c\/h3\u003e\n\u003cp\u003eCast iron is sturdy at the grill but can crack or chip if mishandled in transit. Inspect each piece on arrival and handle with care while installing. Confirm model numbers and measurements before use to ensure a proper fit and safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarefully unpack and check for shipping damage immediately.\u003c\/li\u003e\n  \u003cli\u003eMatch the 19 3\/4\" x 6 3\/4\" pieces to your grill’s supports before seating.\u003c\/li\u003e\n  \u003cli\u003eSeason the grates after cleaning to create protective coating and improve food release.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain and season these Votenli cast iron grates?\u003c\/h3\u003e\n\u003cp\u003eRegular maintenance prolongs the life of cast iron grates and keeps food from sticking. After each cook, brush off debris; periodically deep-clean and apply a thin oil layer to protect the surface from rust.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean with a stiff wire brush while warm; avoid soap unless reseasoning.\u003c\/li\u003e\n  \u003cli\u003eApply high smoke-point oil and heat to form a protective seasoning layer.\u003c\/li\u003e\n  \u003cli\u003eStore in a dry place or cover your grill to limit moisture exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Home cooks and backyard grillers who own compatible Chargriller or King Griller gas models and prefer the heat retention and searing performance of cast iron. This set suits anyone replacing damaged or missing grates who wants full-width coverage in a durable four-piece format. Note: because cast iron can be damaged during shipping, this product is best for buyers willing to inspect on delivery and perform standard seasoning and maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these grates fit Chargriller 3008?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Votenli C6505A grates are sized to fit Chargriller 3008 when dimensions match the 19 3\/4\" x 6 3\/4\" sections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How should I season these cast iron grates?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: After cleaning, apply a thin layer of high smoke-point oil and heat the grates until smoking to build a protective seasoning layer.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56834917892436,"sku":"B082PZ4RKP","price":116.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packed-grates.jpg?v=1787054633"},{"product_id":"votenli-stainless-steel-cooking-grates-4-pack-19-75x6-75-direct-fit-replacement-for-chargriller-rust-resistant-easy-clean","title":"Votenli Stainless Steel Cooking Grates 4-Pack 19.75x6.75 Direct-Fit Replacement for Chargriller — Rust-Resistant, Easy-Clean","description":"\u003cstrong\u003eVotenli S6505A replacement cooking grates are a 4-piece stainless steel set sized 19¾\" x 6¾\" each (19¾\" x 27\" assembled) designed to restore cooking surface and even heat for compatible Chargriller and King Griller models.\u003c\/strong\u003e\n\n\u003cp\u003eIf your grill's cooking surface is warped, corroded, or missing sections, these Votenli S6505A grates offer a direct-fit stainless-steel replacement that matches many Chargriller and King Griller gas and charcoal models. Built as a set of four, they recreate the original footprint and provide a durable, easier-to-clean surface that resists rust and high heat. Before ordering, measure your existing grates to confirm fit; the listing covers many common model numbers but physical verification ensures a perfect match.\u003c\/p\u003e\n\n\u003ch3\u003eWhich grill models do these grates fit?\u003c\/h3\u003e\n\u003cp\u003eThese grates are manufactured to replace original parts on a wide range of Chargriller and King Griller units. They target specific model numbers and lineup variations commonly used in both gas and charcoal configurations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Chargriller models include: 2121, 2123, 2222, 2828, 3001, 3030, 3725, 4000, 5050, 5252 and related variants.\u003c\/li\u003e\n  \u003cli\u003eAlso fits King Griller models such as 3008 and 5252, plus Char-Griller Duo 5050 grill references.\u003c\/li\u003e\n  \u003cli\u003eAlways measure your old grate (length and depth) before purchase—listed dimensions are 19¾\" x 6¾\" each.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and heat-resistant are these stainless-steel grates?\u003c\/h3\u003e\n\u003cp\u003eThe S6505A grates are made from stainless steel that stands up to high cooking temperatures and routine outdoor exposure. While stainless helps resist rust and pitting, regular cleaning and proper storage extend their lifetime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless-steel material for improved corrosion resistance versus untreated steel.\u003c\/li\u003e\n  \u003cli\u003eDesigned to tolerate direct grill heat; suitable for typical backyard grilling use.\u003c\/li\u003e\n  \u003cli\u003eHand or brush-clean after use to remove food residue and prevent buildup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and how do they assemble?\u003c\/h3\u003e\n\u003cp\u003eThe set includes four individual grates that align to recreate the original cooking area. Each piece measures 19¾\" long by 6¾\" deep; laid side-by-side they form an approximate 19¾\" x 27\" surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndividual piece: 19¾\" (length) x 6¾\" (depth).\u003c\/li\u003e\n  \u003cli\u003eCombined cooking area when all four are installed: roughly 19¾\" x 27\".\u003c\/li\u003e\n  \u003cli\u003eSold as a 4-piece set so you can replace only worn sections or refresh the entire grate area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward and are any tools required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically simple: remove the old or damaged grates and position each Votenli piece into the existing grate rests. No special hardware is included because the grates sit on the grill supports the same way the originals did.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo extra fasteners required—grates rest on factory supports.\u003c\/li\u003e\n  \u003cli\u003eMeasure your original grates to confirm exact fit before installation.\u003c\/li\u003e\n  \u003cli\u003eIf the original supports are bent or damaged, those may need repair for a secure fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Votenli S6505A 4-pack is aimed at grill owners who need a cost-effective restoration of their cooking surface—ideal for Chargriller and King Griller users with worn, rusty, or missing grates who prefer durable stainless-steel replacements that match original dimensions. If you maintain your grill frequently and want a simple drop-in swap to recover even heating and a cleaner cooking surface, this set is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these grates fit my Chargriller 3001?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the S6505A set lists compatibility with Chargriller 3001, but confirm by measuring your original grate's 19¾\" x 6¾\" dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bolts or clips included for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No extra hardware is included; these grates sit on existing factory supports and require no additional fasteners.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56837461377364,"sku":"B07J5NX8DP","price":121.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-packaging-grates_0ba3e3b7-8778-4616-bebf-f049fc21d0d3.jpg?v=1787059743"},{"product_id":"votenli-stainless-steel-cooking-grates-replacement-17-3-8in-5-pack-corrosion-resistant","title":"Votenli Stainless Steel Cooking Grates Replacement 17 3\/8in (5-Pack) Corrosion-Resistant","description":"\u003cb\u003eVotenli S6602E is a five-piece set of 17 3\/8-inch stainless steel cooking grids designed to replace worn or missing grates on compatible Broil-Mate, Broil King Baron, Huntington and Sterling models.\u003c\/b\u003e\n\n\u003cp\u003eThese replacement cooking grids provide an exact-sized, corrosion-resistant option when original grates are bent, rusty or missing. Made from stainless steel and sized at 17.375 x 31.875 inches, the S6602E pack restores full grilling capacity for many gas grill models released since 1992. The listing covers five individual grates so you can refresh multiple cooking surfaces at once.\u003c\/p\u003e\n\n\u003ch3\u003eWhich grill models are these Votenli grates compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese cooking grids were engineered to fit a wide range of Broil King, Broil-Mate, Huntington and Sterling grills and model families. Check your grill’s model number and measure existing grates to confirm fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBroil King: models since 1992 including 9235-24, 9235-27, 9235-84, 9235-87, 9635-84, 9635-87, Baron 540, Baron 590, Baron 590-S\u003c\/li\u003e\n  \u003cli\u003eBroil-Mate: 7130-54, 7130-64, 7133-64, 7133-67, 7133-84H, 7133-87H, 7139-84, 7139-87\u003c\/li\u003e\n  \u003cli\u003eHuntington: 6130-54, 6130-57, 6130-64, 6130-67, 6133-64, 6133-67, 6133-84, 6133-87, 6139-84, 6139-87\u003c\/li\u003e\n  \u003cli\u003eSterling: 5130-54, 5130-64, 5133-64, 5133-67, 5139-64, 5139-84, 5139-87\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and easy to maintain are these stainless-steel cooking grids?\u003c\/h3\u003e\n\u003cp\u003eConstructed from stainless steel, these grates resist rust better than standard iron and are built for repeated use. Routine cleaning after each cook helps keep bars bright and food release improved; occasional deep cleaning removes stuck-on residues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel construction for corrosion resistance and long-term use\u003c\/li\u003e\n  \u003cli\u003eSmooth bars simplify scraping and brushing after cooking\u003c\/li\u003e\n  \u003cli\u003eDishwasher-safe for smaller pieces, though hand-cleaning recommended for full-size grates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and what does the package include?\u003c\/h3\u003e\n\u003cp\u003eEach grate measures 17.375 x 31.875 inches — a standard replacement size for the compatible models listed. The package contains five individual cooking grids so you can replace multiple racks or keep spares on hand.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle grate dimensions: 17.375\" x 31.875\"\u003c\/li\u003e\n  \u003cli\u003ePack contents: five stainless-steel cooking grids\u003c\/li\u003e\n  \u003cli\u003eSold as a set; measure original grates to confirm fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm these grates will fit my grill?\u003c\/h3\u003e\n\u003cp\u003eMeasure the length and width of your existing grate and compare to the listed dimensions. Also verify your grill’s model number against the compatibility lists; if you’re unsure, keep a photo of your current grate and dimensions for easier verification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure across the cooking surface for length and width matching 17.375 x 31.875 inches\u003c\/li\u003e\n  \u003cli\u003eMatch model numbers from your grill’s manual or label\u003c\/li\u003e\n  \u003cli\u003eContact support with photos if fit questions remain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners and backyard grillers who own Broil-Mate, Broil King Baron, Huntington or Sterling grills listed above and need a reliable replacement for rusted, warped, or missing cooking grids. These five stainless-steel grates are ideal for those replacing multiple racks at once or keeping extras for seasonal maintenance. If you value corrosion resistance and exact-fit OEM-style replacements, the Votenli S6602E set provides a durable, ready-to-install solution.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these grates fit my Broil King Baron 590?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Votenli S6602E list includes Broil King Baron 590 and compatible 1992-and-later models; verify by measuring your current grate at 17.375 x 31.875 inches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the grates rust-resistant and easy to clean?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are stainless steel, which improves rust resistance. Clean after each use with a grill brush; occasional deep cleaning removes stuck residue.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56839746945364,"sku":"B07J4WP63J","price":148.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-grate-front-view_29f57be0-9936-4643-b8a9-5c602b52f95c.jpg?v=1787068309"},{"product_id":"votenli-cast-iron-cooking-grate-replacement-for-22-5-inch-weber-kettles-21-5-inch-outer-heavy-duty-searing-surface","title":"Votenli Cast Iron Cooking Grate Replacement for 22.5-inch Weber Kettles — 21.5-inch Outer, Heavy-Duty Searing Surface","description":"\u003cp\u003e\u003cstrong\u003eVotenli C883E is a heavy-duty cast iron replacement cooking grate engineered to fit 22.5-inch Weber-style charcoal kettles and deliver strong heat retention and searing performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a single robust cooking grate to replace a worn or damaged grate on a 22.5-inch Weber Original Kettle, Performer, Master-Touch or similar charcoal grill, the Votenli C883E is sized and shaped to match those models while offering the heat-holding properties of cast iron. This casting is built to outlast thinner or enamel-coated bars and to develop attractive sear marks when properly seasoned and preheated. Before ordering, compare your original part’s diameter and mounting arrangement to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWill this grate fit my 22.5-inch Weber kettle?\u003c\/h3\u003e\n\u003cp\u003eThe Votenli C883E is intended for grills that accept a roughly 21.5-inch outer cooking surface and an inner grid about 12 inches across. It was designed to match the common mounting and clearance of many 22.5-inch Weber models, but fit can vary by model year and accessory configuration. Always measure your existing grate and mounting points first.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOuter diameter: 21.5 inches — check against your grill bowl opening.\u003c\/li\u003e\n  \u003cli\u003eInner cooking grid diameter: ~12 inches — useful for center access features.\u003c\/li\u003e\n  \u003cli\u003eCompatible models: many Weber 22.5\" Original Kettle, Performer, Master-Touch and similar kettles.\u003c\/li\u003e\n  \u003cli\u003eSold as a single replacement cooking grate; no additional hardware included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does cast iron improve cooking compared with enameled bars?\u003c\/h3\u003e\n\u003cp\u003eCast iron stores and distributes heat more evenly than thin steel bars, helping maintain a steady searing temperature across the surface. It creates well-defined grill marks and adds a flavorful crust when properly heated. Cast iron also resists chipping that can occur with thin enamel coatings, though it requires seasoning and basic rust prevention.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh thermal mass for sustained searing heat.\u003c\/li\u003e\n  \u003cli\u003eDurable casting resists bending and chipping over time.\u003c\/li\u003e\n  \u003cli\u003eRequires seasoning to build a nonstick surface and protect from rust.\u003c\/li\u003e\n  \u003cli\u003eWill produce pronounced sear marks when hot.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat care and maintenance does a cast iron grate need?\u003c\/h3\u003e\n\u003cp\u003eCast iron needs routine seasoning and simple cleaning to remain rust-free and nonstick. Avoid long steam cleaning sessions or leaving the grate wet; instead, scrub debris while warm, dry thoroughly, and apply a light oil coating before storage. Periodically re-season with high-smoke-point oil to restore the cooking surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean with a grill brush or scraper while warm; avoid soap if possible.\u003c\/li\u003e\n  \u003cli\u003eDry completely after cleaning, then rub a thin layer of oil on the surface.\u003c\/li\u003e\n  \u003cli\u003eRe-season on the grill at high heat to polymerize oil and rebuild coating.\u003c\/li\u003e\n  \u003cli\u003eInspect upon delivery for casting irregularities due to the material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying to ensure compatibility?\u003c\/h3\u003e\n\u003cp\u003eMeasure the outer diameter of your existing grate and check any locking or support tabs on your grill that secure the grate. Compare those dimensions with the Votenli C883E specifications and confirm the inner opening size if your grill uses a removable center section for charcoal access or a charcoal basket. If possible, verify that your kettle is a 22.5-inch model and that accessories won’t interfere with the replacement grate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your grill bowl is the 22.5-inch Weber-style size.\u003c\/li\u003e\n  \u003cli\u003eMeasure existing grate outer diameter and center opening.\u003c\/li\u003e\n  \u003cli\u003eCheck for support ledges or tabs that align with the replacement.\u003c\/li\u003e\n  \u003cli\u003ePurchase only after confirming size and mounting match your grill.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Votenli C883E cast iron cooking grate suits grill owners who want a single heavy-duty replacement for common 22.5-inch Weber-style kettles and who are comfortable maintaining cast iron (seasoning, oiling, and drying). It’s a good choice for cooks who prioritize searing performance and long-term durability over the lower maintenance of porcelain-coated bars, provided they confirm the grate’s dimensions match their grill before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this grate fit all Weber 22.5-inch kettles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many Weber 22.5\" models (Original Kettle, Performer, Master-Touch), but measure your grate and rim—outer diameter 21.5\" and inner 12\"—to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I prevent rust on this cast iron grate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Clean while warm, dry thoroughly, then apply a thin layer of cooking oil and re-season on the grill to protect against rust.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Votenli","offers":[{"title":"Default Title","offer_id":56839938146644,"sku":"B08155XBLM","price":139.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/votenli-front-view-replacement-grate.jpg?v=1787068801"}],"url":"https:\/\/gardenluxe.co.uk\/collections\/brand-votenli.oembed","provider":"Gardenluxe Uk","version":"1.0","type":"link"}