{"title":"Victron Energy","description":"\u003cp\u003eBrowse our full Victron Energy range. Every order ships free across the UK, with free 30-day returns as standard.\u003c\/p\u003e","products":[{"product_id":"victron-energy-orion-tr-dc-dc-converter-isolated-high-efficiency-for-vehicle-marine-off-grid-systems","title":"Victron Energy Orion-Tr DC-DC Converter, Isolated — High-efficiency for Vehicle, Marine \u0026 Off-Grid Systems","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy Orion-Tr DC to DC Converter delivers reliable, high-efficiency DC voltage conversion for vehicles, boats, and off-grid systems, available in isolated and non-isolated versions to suit different electrical setups.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for mobile and stationary power systems, the Orion-Tr series converts one DC voltage to another while minimizing losses and heat. Built with rugged protection and straightforward screw-terminal connections, these converters are intended for applications where dependable voltage translation is required—such as charging auxiliary batteries from alternators, powering sensitive electronics, or distributing power across different voltage subsystems.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Orion-Tr improve energy efficiency in my system?\u003c\/h3\u003e\n\u003cp\u003eThe Orion-Tr uses modern switching power electronics to raise overall conversion efficiency, reducing wasted energy and unwanted heat. Higher efficiency means less energy drawn from the source and cooler operation under load, which benefits both battery life and system reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced switching design for reduced conversion losses\u003c\/li\u003e\n  \u003cli\u003eLower heat generation compared to older linear converters\u003c\/li\u003e\n  \u003cli\u003eAvailable in multiple power ratings to match system demand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install the Orion-Tr in damp or mobile environments?\u003c\/h3\u003e\n\u003cp\u003eWhen fitted according to Victron’s installation instructions, the Orion-Tr offers IP43-level protection, providing splash resistance suitable for occasional moisture exposure. That makes it a good option for marine, recreational vehicle, and workshop settings where components face damp conditions but are not submerged.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP43 protection against splashes when correctly mounted\u003c\/li\u003e\n  \u003cli\u003eRobust housing engineered for vibration-prone locations\u003c\/li\u003e\n  \u003cli\u003eDesigned for both vehicle and marine electrical compartments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and wiring options are available?\u003c\/h3\u003e\n\u003cp\u003eOrion-Tr converters include screw terminal connections for straightforward wiring without specialized tooling. They are offered in isolated and non-isolated variants plus multiple voltages and amperages, so you can pick the model that fits your system architecture and grounding layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eScrew terminals for direct, tool-friendly installation\u003c\/li\u003e\n  \u003cli\u003eIsolated models for separate ground systems or sensitive electronics\u003c\/li\u003e\n  \u003cli\u003eMultiple voltage and current configurations to match loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich maintenance or safety considerations should I follow?\u003c\/h3\u003e\n\u003cp\u003ePeriodic inspection of mounting, wiring torque, and ventilation will keep the converter operating reliably. Ensure the unit has sufficient airflow and observe manufacturer guidelines for fuse protection, wiring sizes, and correct polarity to prevent damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintain clear airflow around the unit to aid cooling\u003c\/li\u003e\n  \u003cli\u003eUse recommended fuses and cable gauges for safety\u003c\/li\u003e\n  \u003cli\u003eCheck connections periodically for secure terminations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Victron Energy Orion-Tr DC to DC Converter is aimed at installers, boaters, RV owners, and off-grid system builders who need compact, efficient DC voltage conversion. Choose an isolated model when you require galvanic separation for sensitive electronics or when integrating differently grounded systems; select a non-isolated version for simpler, cost-effective power distribution where shared grounding is acceptable.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Orion-Tr isolated from vehicle ground?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Some Orion-Tr models are isolated; choose the isolated version if you need galvanic separation between input and output grounds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required—screw terminals allow straightforward wiring using common hand tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56801225343316,"sku":"B07D5N3XSS","price":246.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-orion-tr-front-panel.jpg?v=1786739415"},{"product_id":"victron-energy-smartsolar-mppt-tr-charge-controller-70a-150v-pv-input-12-24-36-48v-with-bluetooth","title":"Victron Energy SmartSolar MPPT Tr Charge Controller — 70A, 150V PV Input, 12\/24\/36\/48V with Bluetooth","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy SmartSolar MPPT Tr is a high-performance solar charge controller that converts solar array power into optimized battery charging for 12\/24\/36\/48V systems with up to 70A output and 150V PV input.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for small to medium off-grid, mobile, and backup power systems, this MPPT (Maximum Power Point Tracking) charge controller uses fast tracking algorithms and intelligent charging profiles to extract maximum energy from PV arrays while protecting battery health. It supports synchronized multi-controller setups, an intelligent load output, and Bluetooth\/VictronConnect integration for monitoring and configuration.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this controller improve solar harvest on partly shaded days?\u003c\/h3\u003e\n\n\u003cp\u003eThe SmartSolar MPPT Tr uses rapid MPPT tracking and advanced algorithms to find the best operating point of your solar array, even when panels are unevenly illuminated. That reduces lost power and raises daily energy yield compared with simpler controllers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUltra-fast MPPT updates capture dynamic changes in irradiance.\u003c\/li\u003e\n  \u003cli\u003eOptimized charging algorithms reduce energy waste and heat.\u003c\/li\u003e\n  \u003cli\u003eSupports higher PV input (150V) for longer string arrangements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat battery types and voltages are supported and how does charging work?\u003c\/h3\u003e\n\n\u003cp\u003eIt handles 12, 24, 36, and 48V battery banks and includes configurable charge profiles to match common battery chemistries. Preset options and adjustable parameters let you tune bulk, absorption, and float stages to balance charging speed and battery longevity.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFour nominal system voltages: 12\/24\/36\/48V auto-detection.\u003c\/li\u003e\n  \u003cli\u003eCustomizable charge stages with user-selectable presets.\u003c\/li\u003e\n  \u003cli\u003eIntelligent load output with low-voltage disconnect protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do multiple SmartSolar units work together in bigger systems?\u003c\/h3\u003e\n\n\u003cp\u003eMultiple SmartSolar MPPT Tr controllers can synchronize their charging stages, enabling them to act as a coordinated charging array rather than independent units. This synchronization helps prevent competing charge cycles and evenly distributes charging across batteries for consistent system behavior.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eControllers share timing to harmonize bulk, absorption, and float transitions.\u003c\/li\u003e\n  \u003cli\u003eScales system capacity by adding parallel MPPT units without manual balancing.\u003c\/li\u003e\n  \u003cli\u003eMaintains battery health with coordinated charge management.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectivity and monitoring options does Victron offer for this model?\u003c\/h3\u003e\n\n\u003cp\u003eBuilt-in Bluetooth lets you connect to the VictronConnect app for setup, live telemetry, and 30-day performance history. The app also allows firmware updates, alarm configuration, and battery preset selection so you can manage the system from a smartphone or tablet.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eVictronConnect app for real-time monitoring and configuration.\u003c\/li\u003e\n  \u003cli\u003eFirmware updates and remote settings through Bluetooth.\u003c\/li\u003e\n  \u003cli\u003eData logging of recent performance for troubleshooting and optimization.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Victron Energy SmartSolar MPPT Tr 150V 70A is aimed at homeowners, RV and marine owners, and off-grid installers who need a compact yet powerful MPPT controller that supports higher PV voltages, coordinated multi-controller systems, and Bluetooth monitoring. It fits systems that demand reliable energy harvesting, configurable battery care, and clear system visibility without complex external hardware.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What PV input and output limits does this MPPT support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It accepts up to 150V PV input and supplies up to 70A to 12\/24\/36\/48V battery systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I monitor this controller remotely with my phone?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—built-in Bluetooth and the VictronConnect app allow local monitoring, setup, and firmware updates.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56801233174868,"sku":"B08N5LZWLY","price":516.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-smartsolar-front.jpg?v=1786739647"},{"product_id":"victron-energy-smartsolar-mppt-solar-charge-controller-35a-150v-input-bluetooth-monitoring-for-12-24-36-48v-systems","title":"Victron Energy SmartSolar MPPT Solar Charge Controller 35A 150V Input, Bluetooth monitoring for 12\/24\/36\/48V systems","description":"\u003cstrong\u003eVictron Energy SmartSolar MPPT 150V 35A is a high-efficiency solar charge controller that maximizes array output and protects batteries across 12\/24\/36\/48V systems.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact MPPT (Maximum Power Point Tracking) controller from Victron Energy converts sunlight into usable power while intelligently managing charging stages to extend battery life. Built for off-grid and hybrid systems, it supports up to 150V PV input and delivers 35A continuous charging. With Bluetooth connectivity through VictronConnect, you can monitor performance, adjust charge profiles, and update firmware from a smartphone.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this controller improve solar harvest on partly shaded roofs?\u003c\/h3\u003e\n\u003cp\u003eThe SmartSolar MPPT uses rapid maximum power point tracking and adaptive algorithms to find the best operating point for your panels, even when shading or variable cloud cover reduces output. It reacts quickly to changing conditions so energy losses are minimized.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast MPP tracking reduces time spent away from peak power.\u003c\/li\u003e\n  \u003cli\u003eIntelligent algorithms optimize voltage\/current for mixed-irradiance strings.\u003c\/li\u003e\n  \u003cli\u003eAccepts PV input up to 150V for larger panel arrays or higher string voltages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use multiple units together and how do they coordinate?\u003c\/h3\u003e\n\u003cp\u003eYes—multiple SmartSolar MPPT units can synchronize to act as a single charging system. They switch charging stages in unison to ensure balanced, efficient charging and to avoid competing control behaviors that can stress batteries.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSynchronized charging stages for consistent battery management.\u003c\/li\u003e\n  \u003cli\u003eSimple network setup via Victron’s communication interfaces and app.\u003c\/li\u003e\n  \u003cli\u003eScales system capacity by adding units without sacrificing control quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat monitoring and configuration options are available?\u003c\/h3\u003e\n\u003cp\u003eBluetooth access through VictronConnect provides live data, 30-day performance history, and full configuration of battery presets, alarms, and firmware updates. Local display options and third-party integration are supported for more advanced system telemetry and logging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time readouts of PV volts, charge amps, and battery status.\u003c\/li\u003e\n  \u003cli\u003e30-day performance history viewable in the app for trend analysis.\u003c\/li\u003e\n  \u003cli\u003eFirmware updates and custom charge settings via VictronConnect.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the load output protect my battery and appliances?\u003c\/h3\u003e\n\u003cp\u003eThe controller includes an intelligent load output that you can set to disconnect at a chosen voltage threshold to prevent deep discharge. That same output can directly power DC loads and is managed automatically by the MPPT to protect battery health.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUser-defined low-voltage disconnect to avoid battery damage.\u003c\/li\u003e\n  \u003cli\u003eAutomatic reconnection logic when battery voltage recovers.\u003c\/li\u003e\n  \u003cli\u003eSafe powering of DC loads with monitored cut-off and restart behavior.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Victron Energy SmartSolar MPPT 150V 35A suits homeowners, RV and boat owners, cabin operators, and small commercial installations that need a reliable, configurable charge controller. Choose this unit if you run multiple panel strings, want Bluetooth system control, or plan to scale with synchronized controllers for higher charging capacity. It’s an excellent option when you require robust MPPT performance, protective load management, and straightforward mobile monitoring without complex setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What PV input voltage does the SmartSolar support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It accepts up to 150V PV input, suitable for higher-voltage panel strings and larger arrays.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it work with different battery voltages?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it supports 12V, 24V, 36V and 48V battery systems and auto-detects the battery system voltage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56801353957716,"sku":"B073ZHRG9K","price":239.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-energy-smartsolar-front-panel.jpg?v=1786740708"},{"product_id":"victron-energy-smartsolar-mppt-solar-charge-controller-45a-150v-12-24-36-48v-bluetooth-monitoring","title":"Victron Energy SmartSolar MPPT Solar Charge Controller 45A 150V — 12\/24\/36\/48V, Bluetooth Monitoring","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy SmartSolar MPPT charge controller (150V, 45A) converts solar panel output into optimized charging power for 12\/24\/36\/48V battery systems while offering app connectivity and synchronized multi-controller operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for small to medium off-grid and backup systems, the SmartSolar MPPT 150V 45A combines fast maximum power point tracking with configurable charging stages and intelligent load control. It supports high open-circuit panel voltages up to 150V, automatic battery charging profiles, and the VictronConnect app for monitoring and setup. The controller is suitable for lead‑acid and lithium battery banks when configured correctly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this MPPT controller improve solar harvest in mixed light?\u003c\/h3\u003e\n\u003cp\u003eThe unit uses a high-speed MPPT algorithm to find the optimal operating point of the solar array, reducing energy loss when clouds pass or when panels are partially shaded. It continuously adjusts voltage and current to maximize power extraction from the panels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast MPPT tracking minimizes time away from peak power point.\u003c\/li\u003e\n  \u003cli\u003eHandles up to 150V open-circuit panel voltage for larger array layouts.\u003c\/li\u003e\n  \u003cli\u003eMaintains output under partial shading better than PWM controllers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectivity and monitoring features are available?\u003c\/h3\u003e\n\u003cp\u003eVictronConnect provides Bluetooth access to live readouts, 30-day performance history, and full configuration of charging stages and alarms. Firmware updates and device presets are also delivered through the app for straightforward system management.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth monitoring with VictronConnect app on mobile devices.\u003c\/li\u003e\n  \u003cli\u003eView real-time voltage, current, and energy statistics.\u003c\/li\u003e\n  \u003cli\u003eConfigure battery type, charge voltages, and load disconnect thresholds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan multiple SmartSolar units work together and why would I do that?\u003c\/h3\u003e\n\u003cp\u003eYes—multiple SmartSolar MPPT controllers can synchronize their charging cycles so the array behaves like a coordinated system. This ensures balanced charging across a shared battery and can increase overall available charging current for larger systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSynchronized charging stages for consistent battery management.\u003c\/li\u003e\n  \u003cli\u003eScales system capacity by adding additional controllers in parallel.\u003c\/li\u003e\n  \u003cli\u003eReduces thermal and electrical stress on a single controller by spreading load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can the load output be used safely in a system?\u003c\/h3\u003e\n\u003cp\u003eThe SmartSolar includes an intelligent load output that lets you power DC loads directly and set a safe disconnect voltage to protect the battery. The controller will automatically cut load power if battery voltage falls below the configured threshold, preventing deep discharge.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProgrammable low-voltage disconnect protects battery life.\u003c\/li\u003e\n  \u003cli\u003eDirectly power lights, pumps, or small appliances from the controller.\u003c\/li\u003e\n  \u003cli\u003eSet automatic reconnection and alarms through the app.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: installers, RV and van converters, boat owners, and homeowners building off-grid or backup solar systems who need a reliable MPPT controller with high input voltage tolerance, Bluetooth monitoring, and the ability to scale by adding multiple controllers. It is best chosen when you require efficient power extraction from variable light conditions, flexible battery configuration for 12\/24\/36\/48V systems, and remote configuration options.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What battery voltages does this controller support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports 12V, 24V, 36V and 48V battery systems selectable via settings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum PV open-circuit voltage?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The SmartSolar accepts up to 150V open-circuit PV input for array planning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56801390788948,"sku":"B09KF94CJH","price":240.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-smartsolar-front-panel.jpg?v=1786741333"},{"product_id":"victron-energy-smartsolar-mppt-100v-30a-solar-charge-controller-12-24v-with-bluetooth","title":"Victron Energy SmartSolar MPPT 100V 30A Solar Charge Controller 12\/24V with Bluetooth","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy SmartSolar MPPT 100V 30A is a Bluetooth‑enabled solar charge controller that maximizes panel harvest while protecting and optimizing your 12\/24V battery bank.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for small to medium off-grid systems, RVs, boats and remote installations, this MPPT (Maximum Power Point Tracking) controller converts variable solar output into steady, efficient battery charging. It pairs fast tracking algorithms with configurable charge profiles and wireless monitoring so you can squeeze more usable energy from panels even under partial shade or changing sunlight. Built by Victron Energy, the unit emphasizes reliability, battery care and simple system integration.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SmartSolar MPPT increase the energy you get from solar panels?\u003c\/h3\u003e\n\n\u003cp\u003eThe controller uses advanced MPPT algorithms to find the optimum voltage\/current point of your solar array and adjust output rapidly as light conditions change. This means it extracts more power than a basic PWM controller, especially during cloudy mornings, late afternoons, or when panels experience uneven shading.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUltra-fast tracking to capture transient peaks of power.\u003c\/li\u003e\n  \u003cli\u003eWorks with panels up to 100V open-circuit for flexible array designs.\u003c\/li\u003e\n  \u003cli\u003eBetter harvest in partial shade or mixed module orientations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the SmartSolar MPPT protect and extend my battery life?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the unit applies intelligent charge algorithms and multi-stage charging to maintain battery health. You can select battery presets or fine-tune settings in the VictronConnect app to match lead‑acid, AGM, GEL, or lithium chemistries, reducing stress on cells and improving cycle life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMulti-stage charge profiles for bulk, absorption and float stages.\u003c\/li\u003e\n  \u003cli\u003eConfigurable settings and battery presets through Bluetooth.\u003c\/li\u003e\n  \u003cli\u003eAuto-disconnect load output to prevent deep discharge and protect batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectivity and monitoring features are available with this controller?\u003c\/h3\u003e\n\n\u003cp\u003eThe SmartSolar includes built-in Bluetooth so you can view system data, change settings and update firmware wirelessly using the VictronConnect app. Live readouts, historical performance data and alarm notifications make troubleshooting and optimization straightforward without extra hardware.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReal-time monitoring and 30‑day performance history in the app.\u003c\/li\u003e\n  \u003cli\u003eFirmware updates and configuration over Bluetooth for quick setup.\u003c\/li\u003e\n  \u003cli\u003eAbility to sync multiple MPPT units to act in unison for larger systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I use the SmartSolar’s load output and synchronization features?\u003c\/h3\u003e\n\n\u003cp\u003eThe controller’s intelligent load output lets you power DC loads directly and set a configurable low-voltage disconnect threshold to protect the battery. Multiple SmartSolar units can synchronize charge stages, so when you employ more than one controller they coordinate charging behavior for balanced and efficient battery management.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProgram disconnect voltage to safeguard against excessive battery depletion.\u003c\/li\u003e\n  \u003cli\u003eSynchronize charge cycles across several MPPT units for consistent charging.\u003c\/li\u003e\n  \u003cli\u003eDirectly feed DC loads without needing a secondary relay in many setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Victron Energy SmartSolar MPPT 100V 30A is well suited for owners of RVs, boats, tiny homes, and small off-grid properties who want reliable, high-efficiency solar charging with flexible monitoring. It’s ideal if you need a compact controller that supports up to 100V panels, offers Bluetooth configuration, and delivers intelligent battery protection. Choose this model if you expect variable light conditions or plan to scale with additional controllers that need to work together.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What battery voltages does this MPPT support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports 12V and 24V battery systems with automatic or manual selection via the app.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I monitor it remotely over Bluetooth?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—use the VictronConnect app to view real-time data, change settings, and update firmware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56801449148756,"sku":"B073ZJ3L13","price":184.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-smartsolar-front-panel_dfe46d15-41c8-4c29-93ed-25c29c60d9e8.jpg?v=1786742040"},{"product_id":"victron-energy-smartsolar-mppt-solar-charge-controller-100v-50a-12-24v-high-efficiency-mppt-bluetooth-monitoring","title":"Victron Energy SmartSolar MPPT Solar Charge Controller 100V 50A 12\/24V — high-efficiency MPPT, Bluetooth monitoring","description":"\u003cstrong\u003eThe Victron Energy SmartSolar MPPT 100V 50A is a high-efficiency solar charge controller that converts sunlight into usable battery power while protecting and optimizing battery life.\u003c\/strong\u003e\n\n\u003cp\u003eBuilt for off-grid systems, RVs, boats and small commercial arrays, the SmartSolar MPPT combines rapid maximum power point tracking (MPPT) with intelligent charging algorithms and modern connectivity. It adapts to changing light conditions, supports synchronized multi-controller setups, and provides a configurable load output so you can manage devices directly from the controller. The result is more usable energy from your panels plus better battery care over time.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SmartSolar MPPT boost solar output under mixed light?\u003c\/h3\u003e\n\u003cp\u003eThe controller finds the optimal operating point of your solar array very quickly, allowing panels to deliver higher power even when partly shaded or when light conditions change fast. Fast MPPT reactions reduce energy loss during cloud transients and variable angles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed tracking minimizes losses from passing clouds.\u003c\/li\u003e\n  \u003cli\u003eWorks with partial shading to extract extra watts compared with conventional controllers.\u003c\/li\u003e\n  \u003cli\u003eSupports arrays up to 100V input for flexible panel layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan multiple SmartSolar units work together for larger systems?\u003c\/h3\u003e\n\u003cp\u003eYes — multiple units can synchronize their charge cycles so they behave like a single, coordinated charger. Synchronized charging ensures uniform battery conditioning and prevents controllers from competing or creating inconsistent charging stages.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eParallel controllers share charge stages for balanced battery maintenance.\u003c\/li\u003e\n  \u003cli\u003eSynchronization avoids stray charging behavior when expanding capacity.\u003c\/li\u003e\n  \u003cli\u003eSimple setup via VictronConnect for coordinated performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectivity and monitoring options are available?\u003c\/h3\u003e\n\u003cp\u003eThe SmartSolar integrates with the VictronConnect app for real-time monitoring, historic performance logs, firmware updates and configuration adjustments. You can set battery presets, tune charging parameters, and enable alarms without additional hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth access through VictronConnect for on-site setup and diagnostics.\u003c\/li\u003e\n  \u003cli\u003eView 30-day performance history and real-time stats on your phone.\u003c\/li\u003e\n  \u003cli\u003eUpdate firmware and tailor charge profiles to battery chemistry and size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the intelligent load output protect my battery and appliances?\u003c\/h3\u003e\n\u003cp\u003eThe controller offers a programmable load output that can power DC loads directly and automatically disconnect them when battery voltage falls below a safe threshold. This prevents deep discharge, extends battery life, and protects connected equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSet a low-voltage disconnect point to prevent harmful discharge.\u003c\/li\u003e\n  \u003cli\u003eDirectly power devices from the controller for compact system designs.\u003c\/li\u003e\n  \u003cli\u003eAutomatic reconnect behavior configurable for predictable restoration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Victron Energy SmartSolar MPPT 100V 50A is aimed at owners of 12V or 24V battery systems who want more energy from their rooftop, array or portable panels — particularly RVers, sailors, cabin owners, tiny-home and off-grid homeowners, and installers expanding small commercial systems. It suits anyone who wants fast MPPT responsiveness, synchronized multi-controller capability, app-based monitoring and an integrated load control to protect batteries and simplify power management.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What battery voltages does this MPPT support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports 12V and 24V battery systems with automatic or manual configuration for either voltage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I monitor it remotely with a phone?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—use the VictronConnect app via Bluetooth to view real-time data, change settings, and update firmware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56801449279828,"sku":"B073ZJ43L1","price":221.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-smartsolar-front-panel_a0d2c903-cc19-4209-aced-b760f6fdbda4.jpg?v=1786742041"},{"product_id":"victron-energy-lynx-shunt-1000a-m8-ve-can-ip22-enclosure-integrated-bus-bars-soc-monitoring","title":"Victron Energy Lynx Shunt 1000A M8 VE.Can — IP22 enclosure, integrated bus-bars \u0026 SOC monitoring","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy Lynx Shunt IP22 VE.Can is a compact, intelligent 1000‑amp battery shunt with integrated bus‑bars and a fuse location, offering precise state‑of‑charge monitoring and VE.Can communication for system integration.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis modular Lynx Shunt is designed to be the control center of a DC power distribution system: it combines a heavy‑duty negative bus‑bar with a calibrated 1000 A shunt and a positive bus‑bar that accepts a replaceable fuse (fuse not included). Built‑in battery monitoring collects current and voltage data, while a VE.Can port lets you connect a Victron GX device for remote monitoring, logging, and configuration. The robust IP22 enclosure and M8 terminals make it suitable for marine, mobile, and off‑grid installations where space and reliable monitoring are essential.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Lynx Shunt measure battery state of charge?\u003c\/h3\u003e\n\n\u003cp\u003eThe unit measures current flow through its precision 1000 A shunt and tracks battery voltage to estimate state of charge. That data is processed by the onboard monitor and made available to GX devices over VE.Can, giving you accurate charge accounting and historical usage trends.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCalibrated 1000 amp shunt for high‑current systems\u003c\/li\u003e\n  \u003cli\u003eOnboard battery monitor computes state of charge\u003c\/li\u003e\n  \u003cli\u003eVoltage sensing ensures better SOC estimation\u003c\/li\u003e\n  \u003cli\u003eData accessible via VE.Can to Victron GX units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connections and hardware features are included?\u003c\/h3\u003e\n\n\u003cp\u003eThe Lynx Shunt combines a negative bus‑bar with an M8 shunt connection and a separate positive bus‑bar with a dedicated location to mount a CNN fuse. It is intended to be the central negative distribution point in a DC system, simplifying wiring and providing a single place for current measurement.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNegative bus‑bar with integrated 1000 A M8 shunt connection\u003c\/li\u003e\n  \u003cli\u003ePositive bus‑bar with mounting space for a CNN fuse (fuse sold separately)\u003c\/li\u003e\n  \u003cli\u003eVE.Can port for GX device communication and setup\u003c\/li\u003e\n  \u003cli\u003eIP22 rated enclosure for protected indoor or sheltered marine use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I integrate the Lynx Shunt with other Victron components?\u003c\/h3\u003e\n\n\u003cp\u003eIntegration is straightforward via the VE.Can port: connect the Lynx Shunt to a Victron GX device to view real‑time current, voltage, and state‑of‑charge, and to log historical performance. Once linked, system settings and monitoring are centralized, which helps with system tuning and troubleshooting.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse VE.Can cabling to connect to Victron GX controllers\u003c\/li\u003e\n  \u003cli\u003eGX device displays SOC, amps in\/out, and voltage readings\u003c\/li\u003e\n  \u003cli\u003eLogged data available for diagnostics and performance review\u003c\/li\u003e\n  \u003cli\u003eWorks with other Victron components for coordinated system control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and safety considerations should I know?\u003c\/h3\u003e\n\n\u003cp\u003eIncorrect installation can create safety hazards; always follow local electrical codes and consult a licensed electrician or installer. The Lynx Shunt requires proper torqueing of M8 terminals, correct fuse selection for the positive bus, and secure VE.Can connections to ensure reliable operation and safety.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSelect the correct CNN fuse and rating for your system (not supplied)\u003c\/li\u003e\n  \u003cli\u003eMount in a ventilated, protected location to maintain IP22 rating\u003c\/li\u003e\n  \u003cli\u003eTorque M8 terminals to Victron specifications to prevent heating\u003c\/li\u003e\n  \u003cli\u003eHave installation reviewed by a qualified professional\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Victron Energy Lynx Shunt IP22 VE.Can 1000 amp (M8) is aimed at installers, marine electricians, off‑grid homeowners, and anyone building a high‑current DC power system who needs reliable central current measurement and VE.Can integration. It suits systems that require a compact, serviceable bus with a place for a fused positive feed and accurate state‑of‑charge monitoring tied into a Victron GX monitoring ecosystem.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Lynx Shunt include the fuse?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the Lynx Shunt provides a fuse mounting location but the CNN fuse must be purchased separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I monitor the shunt remotely?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — connect the Lynx Shunt to a Victron GX device via VE.Can for remote monitoring and logging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56801465499988,"sku":"B00NT9X18M","price":440.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-lynx-shunt-front-view.jpg?v=1786742511"},{"product_id":"victron-energy-bluesolar-mppt-solar-charge-controller-30a-high-efficiency-mppt-battery-protecting-charging","title":"Victron Energy BlueSolar MPPT Solar Charge Controller 30A — High-Efficiency MPPT, Battery-Protecting Charging","description":"\u003cp\u003e\u003cstrong\u003eVictron Energy BlueSolar MPPT is a high-efficiency solar charge controller that optimizes panel output to fast-charge and protect your battery bank.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe BlueSolar MPPT series from Victron Energy uses advanced maximum power point tracking and intelligent charging algorithms to harvest more energy from photovoltaic arrays and deliver it safely to batteries. Designed for off-grid systems, marine applications, and mobile power setups, these controllers prioritize battery health, rapid charge times, and reliable system monitoring. BlueSolar units accept a wide range of panel voltages and adjust automatically to changing light and partial shading conditions to squeeze out additional watts when conditions are less than ideal.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the BlueSolar MPPT improve energy harvest compared to basic charge controllers?\u003c\/h3\u003e\n\n\u003cp\u003eMPPT controllers continuously track the solar array’s maximum power point and convert excess voltage into current, yielding higher charging power especially when panel voltage exceeds battery voltage. This means more usable energy per sunny hour and better performance under mixed light.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eContinuously finds optimum panel voltage for maximum output.\u003c\/li\u003e\n  \u003cli\u003eConverts higher panel voltage into useful battery charging current.\u003c\/li\u003e\n  \u003cli\u003ePerforms better than PWM controllers in bright or partially shaded conditions.\u003c\/li\u003e\n  \u003cli\u003eReduces wasted energy, increasing total harvest over a day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat battery protection and charging features does it offer?\u003c\/h3\u003e\n\n\u003cp\u003eBlueSolar MPPT controllers use intelligent charge algorithms that adapt to battery type and state of charge to prolong battery life. They provide controlled bulk, absorption, and float stages plus temperature compensation when a sensor is fitted.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMultiple charging stages for safe, efficient battery management.\u003c\/li\u003e\n  \u003cli\u003ePreprogrammed profiles for common battery chemistries and customizable settings.\u003c\/li\u003e\n  \u003cli\u003eTemperature compensation input to avoid over- or under-charging in extremes.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in protections against reverse current, overload and short circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I monitor and control the controller remotely?\u003c\/h3\u003e\n\n\u003cp\u003eYou can add Bluetooth connectivity with a Victron Bluetooth dongle (sold separately) to monitor and configure the unit from a smartphone or tablet via VictronConnect. Note that BlueSolar models do not include built-in Bluetooth; for integrated wireless control see the SmartSolar line.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRemote monitoring and configuration via VictronConnect with optional dongle.\u003c\/li\u003e\n  \u003cli\u003eView real-time power, voltage, and historical data on your device.\u003c\/li\u003e\n  \u003cli\u003eAdjust charging parameters, load settings, and alarm limits remotely.\u003c\/li\u003e\n  \u003cli\u003eFirmware updates available through the Victron software ecosystem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich installations are best suited to BlueSolar MPPT controllers?\u003c\/h3\u003e\n\n\u003cp\u003eBlueSolar MPPTs are versatile for fixed and mobile solar systems where maximizing available panel power is important. They fit residential off-grid systems, small commercial arrays, marine power systems, RVs, and remote cabins where reliable battery charging and longevity matter.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOff-grid homes and cabins with battery banks.\u003c\/li\u003e\n  \u003cli\u003eBoats and yachts requiring robust, marine-grade charging.\u003c\/li\u003e\n  \u003cli\u003eRVs and campervans where space and efficiency are priorities.\u003c\/li\u003e\n  \u003cli\u003eSmall commercial sites or remote monitoring installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Installers, DIY solar owners, boaters and RV enthusiasts who need a compact, reliable MPPT controller to maximize solar harvest and protect batteries will appreciate the BlueSolar range. Choose it if you want faster charging, adaptable battery profiles, and the option to add Bluetooth monitoring. If you require onboard wireless without extra accessories, compare the SmartSolar series which includes integrated Bluetooth.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do BlueSolar MPPT controllers include Bluetooth?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — BlueSolar models require a separately sold Victron Bluetooth dongle for wireless monitoring via VictronConnect.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which battery types can BlueSolar charge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They support common battery chemistries with selectable profiles and customizable settings for safe charging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56801736163668,"sku":"B01BPLJASU","price":231.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-bluesolar-front-panel.jpg?v=1786747938"},{"product_id":"victron-energy-bluesolar-mppt-solar-charge-controller-30a-mppt-for-lead-acid-lithium-batteries-ve-direct-monitoring","title":"Victron Energy BlueSolar MPPT solar charge controller — 30A MPPT for lead‑acid \u0026 lithium batteries, VE.Direct monitoring","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy BlueSolar MPPT Solar Charge Controller optimizes solar-panel output and intelligently charges batteries for cleaner, more efficient off-grid and grid-tied systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for photovoltaic setups from small mobile rigs to larger home arrays, the BlueSolar MPPT controller applies fast maximum power point tracking and advanced charging profiles to capture the most energy available from your panels. It adapts to changing light and temperature conditions so batteries receive the right current and voltage without wasting available solar harvest.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the MPPT controller improve energy capture compared with a basic regulator?\u003c\/h3\u003e\n\u003cp\u003eMPPT (Maximum Power Point Tracking) electronics constantly adjust the panel operating point to find the highest power output under varying sunlight. Instead of fixed-voltage regulation, the BlueSolar MPPT converts excess voltage to usable current, increasing the charge delivered to batteries—especially when panels run at higher voltages than the battery bank.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRapid tracking algorithm reduces losses during passing clouds or partial shade.\u003c\/li\u003e\n  \u003cli\u003eEfficient DC-to-DC conversion turns surplus panel voltage into battery charging current.\u003c\/li\u003e\n  \u003cli\u003eWorks well with high-voltage string panels and long wiring runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat battery types and charging strategies does it support?\u003c\/h3\u003e\n\u003cp\u003eThe controller offers selectable charge algorithms tailored for common battery chemistries like lead-acid, AGM, gel, and lithium batteries. Its programmable settings allow correct absorption and float stages, protecting battery life and preserving usable capacity without manual intervention.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMultiple preset charge profiles for lead-acid, AGM, gel and lithium packs.\u003c\/li\u003e\n  \u003cli\u003eTemperature compensated charging when an optional sensor is connected.\u003c\/li\u003e\n  \u003cli\u003eConfigurable absorption and float voltages to match battery manufacturer recommendations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it integrate with system monitoring and other Victron equipment?\u003c\/h3\u003e\n\u003cp\u003eBlueSolar MPPT units are designed to communicate with Victron EcoSmart components and the company’s monitoring ecosystem. With available communication dongles and compatible displays, you can see real-time performance, historical energy production, and set advanced parameters from a central app or display.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Victron VE.Direct or Bluetooth interfaces for live data access.\u003c\/li\u003e\n  \u003cli\u003eProvides system telemetry for energy yield and battery status logging.\u003c\/li\u003e\n  \u003cli\u003eWorks alongside Victron inverters and battery monitors for coordinated power management.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and safety features are included?\u003c\/h3\u003e\n\u003cp\u003eThe controller is built with robust protections against common system faults, and its compact form factor simplifies mounting in enclosures or equipment bays. Clear wiring terminals and status LEDs make setup straightforward for experienced installers and DIYers who follow electrical codes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverload, short-circuit and reverse-polarity protection safeguards wiring and components.\u003c\/li\u003e\n  \u003cli\u003eIP-rated enclosure options for indoor\/outdoor installations (model-dependent).\u003c\/li\u003e\n  \u003cli\u003eClear LED indicators and downloadable configuration tools for commissioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Victron Energy BlueSolar MPPT is aimed at homeowners, RVers, boat owners, and small commercial installers who need reliable, efficient solar charge management. It suits anyone upgrading from basic controllers or building a system that benefits from precise battery charging, smarter energy capture in variable light, and integrated system monitoring. Choose this controller when maximizing energy harvest and preserving battery health are priorities in your photovoltaic setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the BlueSolar MPPT charge lithium batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it supports lithium charge profiles, with configurable absorption and float settings to match lithium battery requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it include remote monitoring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — compatible with Victron VE.Direct or Bluetooth interfaces for real-time monitoring and data logging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56801736458580,"sku":"B076N5PTBN","price":171.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-bluesolar-front-panel_642c7c1a-8164-452a-82b6-11129715c089.jpg?v=1786747939"},{"product_id":"victron-energy-smartsolar-mppt-tr-ve-can-solar-charge-controller-100a-12-24-36-48v-with-bluetooth-250v-pv-input","title":"Victron Energy SmartSolar MPPT Tr VE.Can Solar Charge Controller — 100A, 12\/24\/36\/48V with Bluetooth \u0026 250V PV Input","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy SmartSolar MPPT Tr VE.Can is a Bluetooth-enabled 100A solar charge controller that maximizes PV power while protecting and prolonging battery life across 12\/24\/36\/48V systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis MPPT (Maximum Power Point Tracking) controller from Victron Energy converts variable solar panel output into stable, efficient charging for batteries, adding remote monitoring and synchronized multi-controller operation. Designed for residential, mobile, and small commercial installations, it handles up to 250V input and delivers intelligent charging profiles that adapt to battery chemistry and state of charge.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SmartSolar MPPT improve energy harvest from solar panels?\u003c\/h3\u003e\n\u003cp\u003eThe controller continuously tracks the solar array’s maximum power point to extract the highest available wattage, even when irradiance changes or panels are partially shaded. Fast MPPT algorithms reduce energy loss during transients, making a visible difference in daily yield compared with fixed or slow trackers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed MPPT for rapid response to cloud and shade changes\u003c\/li\u003e\n  \u003cli\u003eWide 250V PV input lets you use longer string configurations\u003c\/li\u003e\n  \u003cli\u003eEfficient conversion minimizes heat and wasted energy\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectivity and monitoring options are available?\u003c\/h3\u003e\n\u003cp\u003eBuilt-in Bluetooth allows real-time local monitoring and full setup with the VictronConnect app. For fleet or multi-controller systems, the VE.Can interface supports synchronized operation and remote telemetry, plus firmware updates and alarm configuration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth for smartphone setup, diagnostics, and 30-day performance history\u003c\/li\u003e\n  \u003cli\u003eVE.Can port for controller synchronization and networked data\u003c\/li\u003e\n  \u003cli\u003eRemote firmware updates and configurable alarm thresholds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this controller protect my batteries and power critical loads?\u003c\/h3\u003e\n\u003cp\u003eThe SmartSolar MPPT includes intelligent charge algorithms tailored to different battery chemistries and multi-stage charging to maximize battery life. It also provides a configurable load output that disconnects nonessential loads automatically when battery voltage drops, preventing deep discharge damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMultiple charge stages and battery presets for lead-acid and lithium types\u003c\/li\u003e\n  \u003cli\u003eAutomatic load disconnect at user-set voltage thresholds\u003c\/li\u003e\n  \u003cli\u003eSynchronizes charge behavior across multiple controllers for balanced charging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and sizing work for different systems?\u003c\/h3\u003e\n\u003cp\u003eThe unit supports nominal system voltages of 12, 24, 36, and 48V and is rated for continuous 100A output, so select based on battery bank voltage and expected solar array current. The 250V maximum PV open-circuit voltage enables flexible array configurations and simplifies wiring for roof or ground-mounted systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChoose model to match battery bank voltage (12–48V) and current needs (100A rating)\u003c\/li\u003e\n  \u003cli\u003e250V PV input reduces string number and cable runs for large arrays\u003c\/li\u003e\n  \u003cli\u003eFollow Victron wiring and fuse recommendations for safe, code-compliant installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, off-grid homeowners, RV and marine owners, and small commercial integrators who need a high-efficiency, feature-rich solar charge controller with remote monitoring and robust synchronization capability. If you require rapid MPPT response, multiple-unit coordination, Bluetooth configuration, and secure load management for 12–48V battery systems, this Victron Energy SmartSolar MPPT model is engineered to meet those demands without unnecessary complexity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What system voltages and current does this MPPT support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports 12\/24\/36\/48V systems and delivers up to 100A continuous output with a maximum PV input of 250V.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I monitor it remotely and update firmware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Bluetooth with VictronConnect provides local monitoring and configuration; VE.Can enables networked monitoring and remote firmware updates.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56801813987668,"sku":"B087CCTRGM","price":747.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-smartsolar-front-panel_7a01541a-52a0-4262-b9e4-5d096fd0d77e.jpg?v=1786749344"},{"product_id":"victron-energy-bluesolar-mppt-solar-charge-controller-bluesolar-variant-high-efficiency-mppt-and-battery-protecting-multi-stage","title":"Victron Energy BlueSolar MPPT Solar Charge Controller — BlueSolar variant, high-efficiency MPPT and battery-protecting multi-stage","description":"\u003cp\u003e\u003cstrong\u003eVictron Energy BlueSolar MPPT is a high-efficiency solar charge controller that maximises power harvest from your panels while protecting and extending battery life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact BlueSolar MPPT controller uses advanced maximum power point tracking and intelligent charging algorithms to convert more sunlight into usable battery energy. Designed for off-grid, marine, caravan, and backup power systems, the unit prioritises efficient charging under changing light conditions and when panels are partially shaded. Bluetooth connectivity is optional via a separate dongle, enabling remote monitoring with VictronConnect.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the BlueSolar MPPT controller improve solar panel output?\u003c\/h3\u003e\n\u003cp\u003eThe controller continuously finds the panels’ optimal operating point to extract the maximum available power as sunlight and temperature vary. Its fast MPPT response and smart charge management reduce energy loss during cloud cover or partial shading, ensuring higher daily energy yield than PWM controllers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed MPPT tracking for quicker adaptation to changing light.\u003c\/li\u003e\n  \u003cli\u003eIntelligent algorithms to minimise energy loss in partial shade.\u003c\/li\u003e\n  \u003cli\u003eEfficient DC-to-battery conversion for more usable watt-hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this device keep my batteries healthy and fully charged?\u003c\/h3\u003e\n\u003cp\u003eYes — BlueSolar’s charge profiles are designed to safely manage lead-acid and other common battery types, preventing overcharge and reducing sulfation risk. The controller guides batteries through bulk, absorption, and float stages to reach and maintain appropriate charge without stressing the battery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-stage charging to preserve battery chemistry and capacity.\u003c\/li\u003e\n  \u003cli\u003eReduced overcharge and heat stress through adaptive control.\u003c\/li\u003e\n  \u003cli\u003eExtends usable battery lifespan with optimized charge cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I monitor and adjust settings remotely?\u003c\/h3\u003e\n\u003cp\u003eRemote monitoring is available by adding the optional Bluetooth dongle and pairing with the VictronConnect app. The dongle provides real-time status, historical data viewing, and configuration of charging parameters from a smartphone or tablet.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth dongle (sold separately) enables wireless monitoring.\u003c\/li\u003e\n  \u003cli\u003eVictronConnect app for setup, diagnostics, and firmware updates.\u003c\/li\u003e\n  \u003cli\u003eAccess to performance logs and live charge statistics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs BlueSolar the right choice compared with SmartSolar and other Victron models?\u003c\/h3\u003e\n\u003cp\u003eBlueSolar is ideal if you want the proven high-performance MPPT core without built-in Bluetooth; it’s often chosen for custom installations where wired monitoring or an external dongle is preferred. If you need integrated wireless connectivity out of the box, consider the SmartSolar line instead.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlueSolar: high-efficiency MPPT without onboard Bluetooth.\u003c\/li\u003e\n  \u003cli\u003eSmartSolar: includes built-in Bluetooth for immediate wireless use.\u003c\/li\u003e\n  \u003cli\u003eChoose depending on your monitoring preference and system design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Victron Energy BlueSolar MPPT is tailored for DIY solar installers, marine and RV owners, off-grid homeowners, and system integrators seeking a reliable, high-efficiency solar charger that prioritises energy harvesting and battery care. It suits setups where remote monitoring may be added later or where a dedicated Bluetooth dongle is preferred for flexible control.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does BlueSolar include Bluetooth built in?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. BlueSolar requires a separate Bluetooth dongle for wireless monitoring; SmartSolar models include built-in Bluetooth.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What batteries does the controller support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports common battery types with multi-stage charging profiles, including lead-acid variants and compatible rechargeable chemistries.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56806043287892,"sku":"B01BVQT2ZA","price":243.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-blue-solar-front-panel.jpg?v=1786812404"},{"product_id":"victron-energy-smartsolar-mppt-tr-ve-can-250v-100a-solar-charge-controller-with-bluetooth","title":"Victron Energy SmartSolar MPPT TR VE.Can 250V 100A Solar Charge Controller with Bluetooth","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy SmartSolar MPPT TR VE.Can 250V 100A is a high-voltage, Bluetooth-enabled MPPT solar charge controller that optimizes panel output and delivers intelligent charging for 12\/24\/36\/48‑volt battery banks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis controller combines a 250‑volt PV input range with a 100‑amp charging output and VE.Can communication for system integration. Built around modern MPPT algorithms and fast electronics, it extracts more usable energy from solar arrays while offering remote setup and real‑time monitoring via Bluetooth. The unit is suitable for larger off‑grid systems, mobile power installations, and multi‑battery systems where efficient charging and networked control matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this controller improve solar energy harvest?\u003c\/h3\u003e\n\u003cp\u003eThe SmartSolar MPPT TR applies high‑speed maximum power point tracking to follow changes in sunlight and panel conditions, so more of the panels' available power reaches the batteries. It reduces energy loss at partial shading and quickly adapts to shifting light levels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh‑speed MPPT electronics for fast tracking of power points\u003c\/li\u003e\n  \u003cli\u003e250V PV input supports larger panel strings and higher array voltages\u003c\/li\u003e\n  \u003cli\u003e100A charging capacity to deliver strong current to the battery bank\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I monitor and configure it remotely?\u003c\/h3\u003e\n\u003cp\u003eYes — Bluetooth on-board enables local wireless setup and monitoring from a smartphone using Victron's apps. VE.Can connectivity allows the unit to integrate with other Victron components and networked system displays for centralized control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth for on-site configuration via mobile app\u003c\/li\u003e\n  \u003cli\u003eVE.Can port for multi-device communication and system telemetry\u003c\/li\u003e\n  \u003cli\u003eAccessible status and logs to fine‑tune charging profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat battery systems and voltages does it support?\u003c\/h3\u003e\n\u003cp\u003eThe controller supports standard 12, 24, 36, and 48‑volt battery banks, making it compatible with most off‑grid and mobile battery architectures. It can be programmed to match battery chemistry and charging stages for safer, more efficient charging behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelectable battery voltages: 12\/24\/36\/48V\u003c\/li\u003e\n  \u003cli\u003eProgrammable charge algorithms to suit lead‑acid, AGM, gel, lithium and other chemistries (selectable settings)\u003c\/li\u003e\n  \u003cli\u003eTemperature compensation and configurable limits for long battery life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the hardware suit larger or professional installations?\u003c\/h3\u003e\n\u003cp\u003eThe 250V PV handling and 100A output let you wire longer strings of panels or fewer parallel strings for reduced cable runs and improved efficiency. VE.Can integration and robust MPPT performance make it practical for multi‑unit systems, boats, RVs, tiny homes, and commercial arrays where monitoring and expansion are priorities.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh PV voltage capability for larger array configurations\u003c\/li\u003e\n  \u003cli\u003e100A charge current to support substantial battery banks\u003c\/li\u003e\n  \u003cli\u003eNetworkable with other Victron devices for scalable systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: installers, system integrators, and owners of larger off‑grid or mobile solar systems who need a fast, networkable MPPT controller with high PV voltage capability and convenient Bluetooth setup. It's well suited when you require reliable maximum power point tracking, the ability to handle extended PV string voltages, and easy monitoring or integration into an existing Victron energy network.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What voltages and battery types does this controller support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Supports 12\/24\/36\/48V battery banks and configurable charge profiles for common chemistries like lead‑acid and lithium.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it offer remote monitoring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — built‑in Bluetooth for mobile app access and VE.Can for system network integration and telemetry.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56806066028884,"sku":"B06Y5QM5R2","price":764.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-front-panel-smartsolar-mppt.jpg?v=1786812726"},{"product_id":"victron-energy-smartsolar-mppt-tr-150v-60a-solar-charge-controller-bluetooth-fast-mppt-tracking","title":"Victron Energy SmartSolar MPPT Tr 150V 60A Solar Charge Controller — Bluetooth, Fast MPPT Tracking","description":"\u003cp\u003e\u003cstrong\u003eVictron Energy SmartSolar MPPT Tr 150V 60A is a high-performance maximum power point tracking solar charge controller that efficiently converts panel output and delivers up to 60A to charge batteries from PV arrays up to 150V.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for off-grid and hybrid solar systems, this SmartSolar MPPT Tr controller combines fast MPPT tracking, robust thermal design, and smart connectivity to maximize energy harvest from PV modules. It supports higher PV open-circuit voltages up to 150V for longer cable runs and larger arrays, and it features built-in Bluetooth and remote monitoring compatibility through Victron’s ecosystem. The unit is designed to prioritize battery health and charging speed while adapting to changing sunlight conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this MPPT controller increase solar energy harvest?\u003c\/h3\u003e\n\u003cp\u003eThe SmartSolar uses advanced maximum power point tracking algorithms to find and hold the PV array’s optimal power point as irradiance and temperature change. Faster tracking and high conversion efficiency reduce energy losses so more watts reach your batteries.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed MPPT algorithm for rapid adaptation to cloud and shading conditions\u003c\/li\u003e\n  \u003cli\u003eSupports PV array voltages up to 150V to extract more power from larger strings\u003c\/li\u003e\n  \u003cli\u003eConversion optimized to minimize heat and power dissipation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and thermal features keep the controller reliable?\u003c\/h3\u003e\n\u003cp\u003eThe Tr variant is engineered for durability: robust heat sinking, temperature sensing, and automatic power regulation protect internal components during sustained high loads. Built-in protections prevent overcurrent, overtemperature, and reverse polarity events.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThermal management with heat sink design and temperature-based current limiting\u003c\/li\u003e\n  \u003cli\u003eOverload and short-circuit protection to safeguard wiring and batteries\u003c\/li\u003e\n  \u003cli\u003eReverse polarity and PV input protection for safe installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does connectivity work and what monitoring options are available?\u003c\/h3\u003e\n\u003cp\u003eIntegrated Bluetooth enables local monitoring via the VictronConnect app, while compatibility with the Victron ecosystem allows remote data logging and system management when paired with a GX device or Venus OS router. This gives visibility into real-time performance and historical production.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in Bluetooth for phone\/tablet configuration and live graphs\u003c\/li\u003e\n  \u003cli\u003eVE.Direct and network interfaces for system integration and remote access\u003c\/li\u003e\n  \u003cli\u003eData logging compatibility with Victron GX devices for cloud monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and sizing considerations?\u003c\/h3\u003e\n\u003cp\u003eChoose the controller if your PV array open-circuit voltage is within 150V and your battery charging current needs are up to 60A. Mount it where air can flow over the heatsink, and size DC cabling and fuses to the expected charging current and system voltage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for systems requiring up to 60A charging at 12\/24\/36\/48V batteries\u003c\/li\u003e\n  \u003cli\u003eInstall with adequate ventilation and correct orientation for thermal performance\u003c\/li\u003e\n  \u003cli\u003eUse appropriately rated DC wiring and overcurrent protection per system design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Victron SmartSolar MPPT Tr 150V 60A is aimed at installers and system owners who need a compact, high-efficiency MPPT solution for medium to large off-grid or hybrid PV systems that require higher PV input voltages and reliable, intelligent charging. It fits boats, RVs, cabins, and residential solar installations where fast tracking, solid thermal management, and seamless Victron monitoring are required. Choose this model when you want to maximize charge speed and system visibility without sacrificing protection or expandability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What PV open-circuit voltage can this controller handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports PV array open-circuit voltages up to 150V, suitable for longer cable runs and larger strings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I monitor the controller remotely?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—built-in Bluetooth for VictronConnect and compatibility with Victron GX devices enables local and remote monitoring.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56806088245588,"sku":"B07B4KF7LY","price":467.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-smartsolar-front-panel_b1df60e8-74ed-4bb8-b0f9-f85ba896bd08.jpg?v=1786812998"},{"product_id":"victron-energy-smartsolar-mppt-solar-charge-controller-150v-70a-high-speed-mppt-bluetooth-monitoring","title":"Victron Energy SmartSolar MPPT Solar Charge Controller 150V 70A — High-Speed MPPT, Bluetooth Monitoring","description":"\u003cp\u003e\u003cstrong\u003eVictron SmartSolar MPPT Tr 150V 70A is a high-efficiency solar charge controller that quickly harvests energy from PV arrays and delivers optimized charging to batteries.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe SmartSolar MPPT Tr 150V 70A combines Victron Energy's latest maximum power point tracking (MPPT) algorithms with a robust 150V input and 70 amp output to maximize energy capture from solar panels. Designed for residential, mobile, and off-grid systems, it speeds up charging while protecting your battery bank and solar array with reliable electronics and intelligent control features. It supports smart communication for monitoring and configuration, letting you see performance in real time and adjust settings to match your battery chemistry.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this MPPT controller increase solar harvest compared with basic regulators?\u003c\/h3\u003e\n\n\u003cp\u003eThe SmartSolar MPPT Tr uses advanced, rapid tracking algorithms to follow the solar array's true maximum power point, especially during changing light conditions. That reduces power loss and improves daily energy yield versus older PWM or slower MPPT units. The controller also accepts higher PV voltages (up to 150V) so you can wire panels in longer strings for lower losses.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-speed MPPT algorithm adapts quickly to cloud and shade changes\u003c\/li\u003e\n  \u003cli\u003e150V PV input lets you configure long series strings for reduced wiring losses\u003c\/li\u003e\n  \u003cli\u003e70A continuous output supports larger battery banks and higher loads\u003c\/li\u003e\n  \u003cli\u003eEfficient conversion yields more usable amp-hours to the battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protections and reliability features are built into this model?\u003c\/h3\u003e\n\n\u003cp\u003eVictron designed the unit with multiple safety and durability measures to protect both the solar array and the batteries. Temperature compensation, overcurrent protection, and intelligent charging limits help prolong battery life and prevent damage under abnormal conditions. The enclosure and thermal design support stable operation at higher ambient temperatures.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOvercurrent and short-circuit protection to safeguard wiring and devices\u003c\/li\u003e\n  \u003cli\u003eTemperature-compensated charging avoids over- or under-charging\u003c\/li\u003e\n  \u003cli\u003eAutomatic PV open-circuit and reverse polarity detection\u003c\/li\u003e\n  \u003cli\u003eBuilt to Victron’s reliability standards for long-term field use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I monitor and configure the SmartSolar controller?\u003c\/h3\u003e\n\n\u003cp\u003eThe SmartSolar Tr includes smart connectivity options for local and remote monitoring. Use Victron's apps and interfaces to view real-time panels, battery status, historical performance, and to change charge parameters for different battery chemistries. This makes tuning and troubleshooting straightforward for installers and end users alike.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBluetooth or network-compatible monitoring via Victron apps and portals\u003c\/li\u003e\n  \u003cli\u003eView live PV input, output current, voltages, and state of charge\u003c\/li\u003e\n  \u003cli\u003eAdjust charge profiles for lead‑acid, lithium, and other battery types\u003c\/li\u003e\n  \u003cli\u003eData logging for performance analysis and system optimization\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and system design considerations should I know?\u003c\/h3\u003e\n\n\u003cp\u003ePlan for appropriate cable sizing and ventilated mounting to handle 70A continuous current and heat dissipation. Because the controller accepts PV voltages up to 150V, you can reduce conductor losses by wiring panels in series, but ensure panel Voc stays below the unit’s limit in cold conditions. Follow Victron’s wiring diagrams and safety guidelines for best results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse correct cable gauge and fused protection sized for 70A output\u003c\/li\u003e\n  \u003cli\u003eMaintain PV Voc below 150V at coldest expected temperature\u003c\/li\u003e\n  \u003cli\u003eMount with airflow around the unit and avoid enclosed, hot locations\u003c\/li\u003e\n  \u003cli\u003eIntegrate with battery management or inverter systems per Victron instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Victron SmartSolar MPPT Tr 150V 70A is aimed at homeowners, RV and marine installers, and off-grid system builders who need fast, efficient solar charging for medium to large battery banks. It suits anyone upgrading from PWM controllers, installers seeking flexible array wiring, and users who want smart monitoring and configurable charge profiles to match modern battery chemistries.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this controller charge lithium batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it supports configurable charge profiles for lithium chemistries; set parameters via Victron’s app or interface.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum PV input voltage?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Maximum PV open-circuit voltage is 150V; ensure your array Voc stays below this at coldest temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56806088376660,"sku":"B07B4K62LN","price":518.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-smartsolar-front-panel_f56abae9-60ec-4eb4-a429-a19ea78fbcfa.jpg?v=1786812999"},{"product_id":"victron-energy-smartsolar-mppt-solar-charge-controller-150v-45a-with-bluetooth-and-advanced-battery-protection","title":"Victron Energy SmartSolar MPPT solar charge controller 150V 45A with Bluetooth and advanced battery protection","description":"\u003cp\u003e\u003cstrong\u003eThe Victron SmartSolar MPPT Tr 150V 45A is a high-efficiency solar charge controller that maximizes energy harvest from PV panels while offering Bluetooth monitoring and advanced battery protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for off-grid, mobile and stationary solar systems, this MPPT (Maximum Power Point Tracking) controller converts variable solar panel output into the optimal charging current for batteries. With a 150V PV input rating and 45A charging capacity, it is engineered to squeeze more usable power from your array, revive heavily discharged batteries, and prevent over-discharge with configurable load management. Built-in Bluetooth lets you view settings and performance on your smartphone via the VictronConnect app.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SmartSolar MPPT increase solar energy harvest?\u003c\/h3\u003e\n\u003cp\u003eThe controller continuously monitors panel voltage and current to identify and operate at the maximum power point, extracting the strongest possible output under changing light and temperature conditions. Faster MPPT algorithms reduce energy loss during rapid irradiance shifts, improving daily yield compared with basic charge controllers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed MPPT tracking for rapid response to changing sunlight\u003c\/li\u003e\n  \u003cli\u003e150V PV input supports larger panel arrays and higher string voltages\u003c\/li\u003e\n  \u003cli\u003eConstant voltage\/current monitoring to maximize conversion efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the controller recover a deeply discharged battery?\u003c\/h3\u003e\n\u003cp\u003eYes — the SmartSolar MPPT Tr is capable of recharging batteries that are severely discharged, restarting charge from very low voltages when the battery cells remain functional. It uses intelligent charging phases to safely bring the battery back to full state while minimizing stress on the battery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates from extremely low battery voltages when cells are not permanently damaged\u003c\/li\u003e\n  \u003cli\u003eMulti-stage charging adapts to battery condition for safer recovery\u003c\/li\u003e\n  \u003cli\u003eSettings adjustable via VictronConnect to match battery chemistry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat battery protection and load control features does it provide?\u003c\/h3\u003e\n\u003cp\u003eThe SmartSolar includes an intelligent load output to prevent deep discharge and protect battery health. You can program the disconnect voltage and behavior so critical loads are preserved while nonessential loads are switched off automatically.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfigurable low-voltage disconnect to avoid battery damage\u003c\/li\u003e\n  \u003cli\u003eProgrammable load output for automatic load shedding\u003c\/li\u003e\n  \u003cli\u003eReal-time monitoring to track load draw and battery state\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I monitor and configure the controller remotely?\u003c\/h3\u003e\n\u003cp\u003eBuilt-in Bluetooth enables direct wireless communication with phones and tablets using VictronConnect, so you can check performance, change settings, and log historical data without needing additional hardware. For larger systems, Victron supports advanced networked monitoring and integration options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth pairing with VictronConnect for setup and diagnostics\u003c\/li\u003e\n  \u003cli\u003eView charging curves, voltages and history on mobile devices\u003c\/li\u003e\n  \u003cli\u003eCompatible with additional Victron monitoring networks for system-wide oversight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Victron SmartSolar MPPT Tr 150V 45A is suited to DIY and professional installers building off-grid cabins, marine electrics, camper conversions, or small commercial solar systems that need higher input voltage capability and intelligent battery management. It appeals to users who want faster MPPT response, reliable recovery of depleted batteries, and seamless Bluetooth configuration for on-site or remote monitoring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What panel voltage and current can this MPPT handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It accepts up to 150V PV input and delivers up to 45A charging current to the battery.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it work with Bluetooth monitoring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — built-in Bluetooth pairs with VictronConnect for configuration and performance monitoring.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56806088343892,"sku":"B07B36X8LP","price":293.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-smartsolar-front-panel_899066f3-63dd-42f2-bc99-4b6915f8551a.jpg?v=1786813001"},{"product_id":"victron-energy-smartsolar-mppt-tr-ve-can-150v-100a-solar-charge-controller-12-24-36-48v-bluetooth-ve-can","title":"Victron Energy SmartSolar MPPT Tr VE.Can 150V 100A Solar Charge Controller — 12\/24\/36\/48V, Bluetooth \u0026 VE.Can","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy SmartSolar MPPT Tr VE.Can 150V 100A is a high-efficiency MPPT solar charge controller that maximizes energy harvest and gives real-time system control for 12\/24\/36\/48V battery banks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompact but powerful, this Victron Energy SmartSolar MPPT controller combines fast MPPT tracking, configurable charging algorithms and VE.Can connectivity so you can monitor and tune your solar setup from the VictronConnect app. Designed for on-grid, off-grid and mobile installations, it balances energy extraction, battery care and load management to improve overall system reliability.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this controller increase solar power harvest?\u003c\/h3\u003e\n\u003cp\u003eThe SmartSolar MPPT uses rapid and accurate Maximum Power Point Tracking to follow the ideal operating point of your PV array and quickly adapt to changing light conditions, including partial shade. Its intelligent algorithms keep panels producing near their theoretical maximum so you get more usable energy over the day.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUltra-fast MPPT tracking minimizes energy loss during irradiance shifts.\u003c\/li\u003e\n  \u003cli\u003eHandles up to 150V PV array input for large panel strings.\u003c\/li\u003e\n  \u003cli\u003eOptimizes output across 12\/24\/36\/48V systems automatically.\u003c\/li\u003e\n  \u003cli\u003eImproves real-world yield when panels are partially shaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat battery charging and management features does it provide?\u003c\/h3\u003e\n\u003cp\u003eVictron’s controller includes multiple charge stages and adaptive algorithms to extend battery life while returning energy efficiently. You can select battery presets or craft custom charge profiles via the VictronConnect app and enable synchronized charging when multiple controllers are used.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-stage charging with configurable absorption and float stages.\u003c\/li\u003e\n  \u003cli\u003eBattery presets for common chemistries, plus custom settings.\u003c\/li\u003e\n  \u003cli\u003eSynchronized charging across multiple MPPT units for uniform battery care.\u003c\/li\u003e\n  \u003cli\u003eIntelligent load output with programmable disconnect voltage to protect batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I monitor and configure the controller?\u003c\/h3\u003e\n\u003cp\u003eConnect locally with Bluetooth or integrate through VE.Can to tie the controller into a larger Victron system. The VictronConnect app shows live telemetry, 30-day performance history and offers firmware updates, alarms and configuration tools from your phone or laptop.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth and VE.Can connectivity for local or system-level monitoring.\u003c\/li\u003e\n  \u003cli\u003eVictronConnect app shows real-time data and historical performance.\u003c\/li\u003e\n  \u003cli\u003eFirmware updates and alarm settings handled through the app.\u003c\/li\u003e\n  \u003cli\u003eEasy configuration of battery profiles and load control parameters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and installation details should I know?\u003c\/h3\u003e\n\u003cp\u003eBuilt with robust protections and designed for practical field installation, this MPPT controller safeguards wiring and connected loads. Follow standard DC installation practices and place the unit where airflow can cool it; consider fusing and cable sizing to match the high-current 100A rating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated protections for reverse polarity, overcurrent and high temperatures.\u003c\/li\u003e\n  \u003cli\u003e100A continuous output requires appropriate fusing and cable gauges.\u003c\/li\u003e\n  \u003cli\u003eMount in a ventilated location to maintain thermal performance.\u003c\/li\u003e\n  \u003cli\u003eVE.Can allows safe system-level communication and control coordination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Victron Energy SmartSolar MPPT Tr VE.Can 150V 100A is ideal for installers and DIYers building medium to large off-grid, marine or hybrid systems who need a high-throughput charger with smart monitoring and multi-unit synchronization. Choose this unit if you want optimized energy harvest from arrays up to 150V, precise battery management for 12–48V banks, and the visibility and configurability of the VictronConnect ecosystem. For small rooftop kits a lower‑amp model may be appropriate; for larger arrays combine multiple units and use VE.Can for coordinated charging.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What battery voltages does this MPPT support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports 12V, 24V, 36V and 48V battery banks with automatic voltage detection and configuration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I monitor the controller remotely?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the controller connects via Bluetooth and VE.Can and can be monitored and configured with the VictronConnect app.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56806218727764,"sku":"B08LBVYTXD","price":658.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-smartsolar-front-panel_51125d08-b66e-435b-90a9-491bc96950f7.jpg?v=1786814272"},{"product_id":"victron-energy-mppt-control-remote-configuration-monitoring-app-bluetooth-ethernet-setup-real-time-telemetry","title":"Victron Energy MPPT Control remote configuration \u0026 monitoring app — Bluetooth\/ethernet setup, real‑time telemetry","description":"\u003cp\u003e\u003cstrong\u003eVictron Energy MPPT Control lets you configure and monitor your Victron MPPT solar charge controller remotely, so you can tweak settings, track performance, and respond to system events without opening the control cabinet.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for installers and system owners who want precise control and real-time insight, the MPPT Control app connects to compatible Victron MPPT charge controllers and presents settings, live telemetry, and logs in a clear interface. Use it during setup to optimize charging profiles and later for routine checks or fault diagnosis. The software complements the MPPT’s fast maximum power point tracking and intelligent charge algorithms to ensure your array performs efficiently under variable conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I change charging settings remotely?\u003c\/h3\u003e\n\u003cp\u003eYou can adjust charge parameters such as absorption voltage, float voltage, and charge current remotely through the MPPT Control interface. Changes take effect immediately on the controller, avoiding the need for physical access or interrupting system operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eModify absorption and float voltages to match battery chemistry.\u003c\/li\u003e\n  \u003cli\u003eSet maximum charge current limits to protect wiring and batteries.\u003c\/li\u003e\n  \u003cli\u003eUpload or restore saved configuration profiles for quick setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat live data can I monitor from the MPPT?\u003c\/h3\u003e\n\u003cp\u003eThe app shows real-time telemetry including PV input, battery voltage, charging current, and controller temperature. This lets you verify that the MPPT is tracking the optimum power point and that batteries are receiving appropriate charge.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstant PV power and voltage readouts for performance checks.\u003c\/li\u003e\n  \u003cli\u003eBattery state indicators and charge stage (bulk\/absorption\/float).\u003c\/li\u003e\n  \u003cli\u003eHistorical logs and event timestamps for troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does MPPT Control improve system performance in partial shade?\u003c\/h3\u003e\n\u003cp\u003eWhile the MPPT hardware performs the core tracking, MPPT Control helps you fine-tune settings and observe how shade patterns affect output. Quick access to voltage and current curves makes it easier to spot mismatches and optimize panel or string configurations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eView PV power curves to identify shading or mismatch losses.\u003c\/li\u003e\n  \u003cli\u003eAdjust array settings and test different configurations remotely.\u003c\/li\u003e\n  \u003cli\u003eSave proven settings that maximize yield under local conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use MPPT Control for maintenance and troubleshooting?\u003c\/h3\u003e\n\u003cp\u003eYes—remote logs, event history, and current diagnostics streamline maintenance and reduce site visits. The controller reports fault codes and operational warnings so you can decide whether a field visit is required or a remote parameter tweak will resolve the issue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccess error codes and timestamps to pinpoint incidents.\u003c\/li\u003e\n  \u003cli\u003eMonitor temperature and operating limits to prevent damage.\u003c\/li\u003e\n  \u003cli\u003eExport logs for handover to service technicians or archives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: MPPT Control is aimed at installers, fleet operators, and DIY system owners using Victron MPPT solar charge controllers who want efficient commissioning, fast remote diagnostics, and on-the-fly optimization. If you manage off-grid, hybrid, or grid-tied battery systems and value quick access to controller settings and performance data, this tool reduces downtime and helps maintain optimal power output.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which MPPT controllers are compatible with MPPT Control?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: MPPT Control works with compatible Victron MPPT models; check Victron’s compatibility list or product documentation for specific model support.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I log data remotely with MPPT Control?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the app provides live telemetry and historical logs you can view and export for troubleshooting or record-keeping.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56818479268180,"sku":"B017T2XOE0","price":78.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-energy-mppt-control-front-interface.jpg?v=1786960472"},{"product_id":"victron-energy-bluesolar-mppt-regulador-75v-10a-12-24v-seguimiento-mppt-rapido-y-proteccion-de-bateria","title":"Victron Energy BlueSolar MPPT Solar Charge Controller 75V 10A — 12\/24V, high-efficiency MPPT for boats \u0026 vans","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy BlueSolar MPPT 75V 10A is a high-efficiency solar charge controller that optimizes panel output and safely charges 12V or 24V battery banks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for small to midsize off-grid and mobile solar setups, the BlueSolar MPPT brings fast maximum power point tracking and advanced charging algorithms to improve energy harvest and battery life. It accepts up to 75V from the solar array and delivers up to 10A to 12V or 24V batteries, making it a compact, reliable choice for boats, campervans, tiny homes, and remote cabins.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the BlueSolar MPPT increase solar energy harvest?\u003c\/h3\u003e\n\u003cp\u003eThe controller uses MPPT (Maximum Power Point Tracking) to continuously find the best operating voltage for your solar panels, so they deliver the highest possible power under changing conditions like cloud cover or partial shading.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRapid tracking adjusts to panel voltage changes for peak output.\u003c\/li\u003e\n  \u003cli\u003eWorks with panels up to 75V input for flexible array designs.\u003c\/li\u003e\n  \u003cli\u003eReduces energy losses compared with PWM controllers, especially when panel voltage exceeds battery voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat battery types and voltages does it support?\u003c\/h3\u003e\n\u003cp\u003eThe BlueSolar MPPT is compatible with 12V and 24V battery systems and supports common lead‑acid and lithium chemistries when configured correctly, providing multi-stage charging to help maintain battery health.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic detection and regulation for 12V\/24V systems.\u003c\/li\u003e\n  \u003cli\u003eProgrammable charge profiles to match battery specifications.\u003c\/li\u003e\n  \u003cli\u003eSmart charge algorithms to reduce overcharging and extend service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I monitor and control the controller remotely?\u003c\/h3\u003e\n\u003cp\u003eYes—remote monitoring and configuration are available via VictronConnect, but note this BlueSolar model requires a separately sold Bluetooth dongle to enable wireless connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePair with VictronConnect to view real-time data and settings.\u003c\/li\u003e\n  \u003cli\u003eBluetooth dongle sold separately for wireless access.\u003c\/li\u003e\n  \u003cli\u003eLocal LED indicators provide basic status without a smartphone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and wiring flexibility look?\u003c\/h3\u003e\n\u003cp\u003eThe compact enclosure and clear terminal layout make the unit straightforward to fit into small electrical compartments, while its 75V PV input allows for longer cable runs or higher-voltage panel strings in constrained systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact form factor fits tight spaces on boats and vehicles.\u003c\/li\u003e\n  \u003cli\u003eHigh 75V PV input for flexible panel placement and array design.\u003c\/li\u003e\n  \u003cli\u003eClear labeling of PV, battery, and load terminals simplifies wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Victron Energy BlueSolar MPPT 75V 10A is best suited to DIY solar builders and small-system installers who need a dependable, efficient charge controller for 12V or 24V battery banks. It fits applications such as campervans, boats, small cabins, and backup power setups where maximizing output from limited panel area matters and remote monitoring is desirable when paired with an optional Bluetooth dongle. Choose this unit when you want proven MPPT performance from a compact controller without built-in Bluetooth—upgradeable via Victron accessories if you later want wireless monitoring.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this BlueSolar controller support 24V batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It auto-detects and supports both 12V and 24V battery systems with appropriate charge profiles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Bluetooth built in for remote monitoring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Bluetooth requires a separately sold Victron Bluetooth dongle to use VictronConnect wirelessly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56818501747028,"sku":"B018M88G5C","price":73.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-blue-solar-front-panel_ac967756-b186-4005-bda9-2add12d87207.jpg?v=1786960524"},{"product_id":"victron-energy-bluesolar-mppt-regulador-solar-75v-15a-12-24v-mppt-rapido-y-carga-multietapa","title":"Victron Energy BlueSolar MPPT Solar Charge Controller 75V 15A — 12\/24V, fast MPPT tracking","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy BlueSolar MPPT 75V 15A is a compact solar charge controller that uses fast MPPT tracking to convert panel power into efficient multi-stage charging for 12V or 24V battery systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for small off-grid systems, RVs, boats and backup installations, this BlueSolar MPPT model accepts up to 75V from your PV array and delivers up to 15A of controlled charge current to lead‑acid and lithium batteries. It combines Victron’s advanced charging algorithms with robust hardware to harvest more energy from your panels than a standard PWM controller, especially in variable light and partial shade.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the BlueSolar MPPT boost energy harvest?\u003c\/h3\u003e\n\u003cp\u003eThe controller continuously tracks the array’s optimum power point and adjusts input voltage to extract maximum watts from panels. Faster MPPT speed and smart algorithms mean it finds the best operating point quickly after cloud movement or shading events, recovering more energy than slower units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum PV input voltage: 75V for flexible panel configurations\u003c\/li\u003e\n  \u003cli\u003eHigh-speed MPPT tracking improves production when lighting changes\u003c\/li\u003e\n  \u003cli\u003eBetter performance in partial shade compared with PWM controllers\u003c\/li\u003e\n  \u003cli\u003eUp to 15A output suits modest battery banks and small off-grid loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich battery types and charge profiles does it support?\u003c\/h3\u003e\n\u003cp\u003eBlueSolar MPPT supports common battery chemistries with selectable multi-stage charging profiles. Choose settings for flooded, AGM, gel, or LiFePO4 batteries to ensure safe, efficient charging without damaging the battery bank.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePreprogrammed profiles for flooded, AGM and gel lead‑acid batteries\u003c\/li\u003e\n  \u003cli\u003eConfigurable charging for LiFePO4 systems when appropriate BMS is used\u003c\/li\u003e\n  \u003cli\u003eBulk, absorption and float stages included for proper battery conditioning\u003c\/li\u003e\n  \u003cli\u003eAdjustable charge parameters via Victron tools and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I monitor and control the controller remotely?\u003c\/h3\u003e\n\u003cp\u003eThis BlueSolar variant does not include built‑in Bluetooth but supports wireless monitoring when you add Victron’s separate Bluetooth dongle. Pair it with the VictronConnect app to view real-time status, historical graphs and to adjust settings from your phone or tablet.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth dongle sold separately for wireless monitoring\u003c\/li\u003e\n  \u003cli\u003eVictronConnect app provides live readings and configuration options\u003c\/li\u003e\n  \u003cli\u003eUSB or VE.Direct compatible for local monitoring and data logging\u003c\/li\u003e\n  \u003cli\u003eFirmware updates and settings backups through Victron software tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and physical considerations should I know?\u003c\/h3\u003e\n\u003cp\u003eThe BlueSolar MPPT’s compact footprint and robust terminals make it straightforward to mount in small enclosures or vehicle compartments. Proper cable sizing, fuse placement and ventilation will maximize reliability; review wiring guidelines and keep the unit protected from direct spray or extreme temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact case for wall or panel mounting in cabins, boats or RVs\u003c\/li\u003e\n  \u003cli\u003eClear terminal layout for PV, battery and optional load connections\u003c\/li\u003e\n  \u003cli\u003eRequires appropriate fusing and correct cable gauge for safety\u003c\/li\u003e\n  \u003cli\u003eHeat dissipation via case — allow airflow and avoid enclosed hot spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Victron Energy BlueSolar MPPT 75V 15A suits DIY solar installers, RV and marine owners, tiny-home builders and small off-grid users who need reliable MPPT performance for a 12V or 24V battery bank. Choose this if you want a proven MPPT controller with flexible battery profiles and the option to add Bluetooth monitoring later—ideal when space is limited but efficient energy harvesting matters.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this model include Bluetooth?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, Bluetooth is not built in. A Victron Bluetooth dongle (sold separately) is required for wireless monitoring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it charge both 12V and 24V batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The controller auto-selects or can be configured for 12V or 24V battery systems and supports multiple charge profiles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56818502336852,"sku":"B018M88G98","price":73.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-blue-solar-frontal.jpg?v=1786960524"},{"product_id":"victron-energy-smart-battery-sense-wireless-voltage-temperature-sensor-12-24-48v-bluetooth-for-mppt-chargers","title":"Victron Energy Smart Battery Sense wireless voltage \u0026 temperature sensor — 12\/24\/48V, Bluetooth for MPPT chargers","description":"\u003cp\u003e\u003cstrong\u003eVictron Energy Smart Battery Sense is a compact wireless sensor that measures battery voltage and temperature to optimize charging for Victron MPPT solar chargers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for off-grid, mobile and backup power systems, this sensor transmits accurate battery information to one or multiple Victron MPPT Solar Chargers via the VE.Smart Network (Bluetooth Smart). By providing real-time voltage and temperature data, the Smart Battery Sense enables chargers to adjust charging behavior to better match battery conditions, improving charging efficiency and helping reduce stress on the battery bank.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Smart Battery Sense improve charging for my solar setup?\u003c\/h3\u003e\n\u003cp\u003eThe sensor sends precise battery voltage and temperature readings to compatible Victron MPPT chargers, allowing them to adapt charge voltage and timing. This reduces over- or under-charging caused by cable losses or ambient temperature changes, so the charger works from a more accurate reference point.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWireless transmission of voltage and temperature to MPPT chargers\u003c\/li\u003e\n  \u003cli\u003eCompensates for voltage drop between battery and charger\u003c\/li\u003e\n  \u003cli\u003eTemperature compensation adjusts float and absorption voltages\u003c\/li\u003e\n  \u003cli\u003eWorks simultaneously with multiple chargers on the same battery bank\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat battery systems and voltages are supported?\u003c\/h3\u003e\n\u003cp\u003eSmart Battery Sense is compatible with 12V, 24V and 48V battery banks used with Victron MPPT Solar Chargers. It communicates with any charger that supports the VE.Smart Network, and a single sensor can serve more than one charger connected to the same battery bank.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with 12V, 24V and 48V lead-acid and lithium battery systems\u003c\/li\u003e\n  \u003cli\u003eSingle sensor can be used by multiple chargers on the same bank\u003c\/li\u003e\n  \u003cli\u003eSet up and pairing through the VictronConnect mobile app\u003c\/li\u003e\n  \u003cli\u003eSuitable for standalone solar arrays, marine installs, RVs and cabins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and setup?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intentionally simple: attach the two supplied eyelets to the battery terminals and stick the unit to the battery body with the integrated adhesive strip. Pairing and configuration are handled through the free VictronConnect app, which walks you through joining the VE.Smart Network.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo eyelets connect directly to battery positive and negative\u003c\/li\u003e\n  \u003cli\u003eSelf-adhesive backing secures the sensor to the battery case\u003c\/li\u003e\n  \u003cli\u003eNo wiring to the charger needed—data is sent wirelessly\u003c\/li\u003e\n  \u003cli\u003eQuick pairing and network setup via VictronConnect\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect in daily use and maintenance?\u003c\/h3\u003e\n\u003cp\u003eOnce installed and paired, the Smart Battery Sense operates autonomously, periodically transmitting voltage and temperature. Its low-profile housing requires minimal maintenance—just ensure battery terminals and adhesive mounting remain secure and free from corrosion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePeriodic wireless data updates to connected MPPT chargers\u003c\/li\u003e\n  \u003cli\u003eLow-maintenance—check connections and adhesive periodically\u003c\/li\u003e\n  \u003cli\u003eHelps chargers adapt to temperature swings and cable losses\u003c\/li\u003e\n  \u003cli\u003eBattery data can be viewed and monitored in VictronConnect\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Victron Energy Smart Battery Sense is aimed at homeowners, marine owners, RVers and installers using Victron MPPT solar chargers who want a straightforward way to feed accurate battery voltage and temperature data to their charging system. If you need a tidy, wireless sensing solution to improve charge precision across 12V, 24V or 48V battery banks—especially when multiple chargers are present—this sensor is a practical add-on that integrates with the Victron ecosystem.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can one Smart Battery Sense be used with multiple MPPT chargers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The sensor shares voltage and temperature data wirelessly and can be used simultaneously by multiple Victron MPPT chargers on the same battery bank.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How is the Smart Battery Sense installed and configured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Attach the two eyelets to the battery terminals, stick the unit to the battery, then pair and configure via the VictronConnect app using the VE.Smart Network.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56824271208788,"sku":"B07RTYGMBD","price":61.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-energy-sensor-front.jpg?v=1786982126"},{"product_id":"victron-energy-smartsolar-pluggable-control-display-for-mppt-compact-plug-in-screen-local-monitoring-configuration","title":"Victron Energy SmartSolar Pluggable Control Display for MPPT – Compact Plug‑In Screen, Local Monitoring \u0026 Configuration","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy SmartSolar Pluggable Control Display is a compact, plug-in screen that lets you view and adjust your SmartSolar MPPT settings quickly from the charge controller itself.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned to work with Victron MPPT solar chargers, this pluggable control display provides immediate local visibility of system status and simple configuration without needing a phone or computer. It connects directly to compatible SmartSolar units so installers, boaters, RV owners, and off-grid homeowners can verify performance, change charge parameters, and troubleshoot on site.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the display let me check my solar system at a glance?\u003c\/h3\u003e\n\u003cp\u003eThe display shows key readouts such as battery voltage, charge current, and solar input power in a clear, readable format. You can quickly confirm whether the MPPT is operating and how much energy it is delivering to your battery bank.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time battery voltage and state indicators\u003c\/li\u003e\n  \u003cli\u003eInstant charge current and power (watts) readings\u003c\/li\u003e\n  \u003cli\u003eStatus icons for MPPT operation mode and fault alerts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I change charge settings directly from this unit?\u003c\/h3\u003e\n\u003cp\u003eYes — the pluggable control display enables local configuration of common charging parameters so you don’t need to connect a phone or VE.Direct adapter for routine adjustments. The interface is straightforward, letting you select charge profiles and fine-tune setpoints safely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwitch between predefined battery charge profiles\u003c\/li\u003e\n  \u003cli\u003eAdjust bulk, absorption, and float voltages\u003c\/li\u003e\n  \u003cli\u003eSet charge current limits and operational behaviors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes installation and use simple for installers and owners?\u003c\/h3\u003e\n\u003cp\u003eThe unit plugs into the MPPT’s communication port for a tool-free connection and draws minimal power. Its compact footprint and intuitive menu layout reduce setup time, and on-site checks become faster because data is displayed locally.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect plug-in to compatible SmartSolar MPPT units\u003c\/li\u003e\n  \u003cli\u003eNo external power source or complex wiring required\u003c\/li\u003e\n  \u003cli\u003eLightweight, durable construction suited to mobile and fixed installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this help when troubleshooting or commissioning a system?\u003c\/h3\u003e\n\u003cp\u003eHaving immediate access to live parameters speeds up fault-finding and commissioning tasks by eliminating guesswork. Technicians can verify connection integrity, confirm proper charge algorithms, and capture status for documentation during handover.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuickly identify abnormal voltages or currents\u003c\/li\u003e\n  \u003cli\u003eView fault codes and operational messages on-site\u003c\/li\u003e\n  \u003cli\u003eUse displayed data to decide whether further diagnostics are needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Victron Energy SmartSolar Pluggable Control Display is intended for installers, boat and RV owners, and off-grid system operators who want immediate, local control and readouts from compatible SmartSolar MPPT charge controllers. It’s ideal when you need fast verification or occasional adjustments without relying on mobile apps or remote tools. For comprehensive monitoring or historical data logging, pair it with Victron’s wider ecosystem, but for day-to-day checks and parameter tweaks, this plug-in display provides a simple, reliable solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the display work without a smartphone?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it plugs directly into compatible SmartSolar MPPT units and provides local monitoring and configuration without a phone.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I change battery charge profiles from the unit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the display allows selection and adjustment of common charge profiles and voltage setpoints on-site.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56828184625492,"sku":"B07GTPQP1X","price":59.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-smartsolar-control-display-front.jpg?v=1786995311"},{"product_id":"victron-energy-smartsolar-mppt-solar-charge-controller-75v-10a-12-24v-fast-mppt-bluetooth-monitoring","title":"Victron Energy SmartSolar MPPT Solar Charge Controller 75V 10A 12\/24V — Fast MPPT, Bluetooth monitoring","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy SmartSolar MPPT 75V 10A is a compact, high-efficiency solar charge controller that optimizes panel output and maintains battery health for 12V or 24V systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for small off-grid systems, cabins, vehicles and auxiliary power setups, this SmartSolar MPPT uses fast maximum power point tracking and adaptive charging algorithms to extract the most energy from your solar array. It supports synchronized operation with other controllers, configurable load output and wireless monitoring via the VictronConnect app, making it a versatile choice for hobbyists and professionals who need precise, reliable battery management.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this controller increase solar energy harvest?\u003c\/h3\u003e\n\n\u003cp\u003eThe SmartSolar MPPT continuously searches for the optimal operating point of your solar panels so they deliver maximum power under changing light and temperature conditions. Its rapid MPPT algorithm reacts quickly to shade, clouds and panel mismatch, improving energy capture compared with simple charge controllers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFast maximum power point tracking for improved yield.\u003c\/li\u003e\n  \u003cli\u003eOperates with panel input up to 75V for flexible array designs.\u003c\/li\u003e\n  \u003cli\u003eWorks efficiently with partially shaded or mixed-module arrays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat charging features protect and extend my battery life?\u003c\/h3\u003e\n\n\u003cp\u003eMultiple charging stages and smart battery presets let you tailor the charge profile to common battery chemistries, reducing stress and prolonging service life. Synchronized charging across multiple SmartSolar units ensures all controllers follow the same charge cycle for balanced system performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt-in multi-stage charging with configurable presets.\u003c\/li\u003e\n  \u003cli\u003eSynchronized charge staging for multiple controllers in one system.\u003c\/li\u003e\n  \u003cli\u003eAutomatic load disconnect to prevent deep battery discharge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I monitor and configure the controller remotely?\u003c\/h3\u003e\n\n\u003cp\u003eThe VictronConnect app connects wirelessly to the controller for real-time telemetry, historical performance data and firmware updates. Use the app to set battery type, change voltage thresholds, review 30-day performance logs, and receive alerts to stay informed about system status.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWireless VictronConnect support for configuration and status viewing.\u003c\/li\u003e\n  \u003cli\u003e30-day performance history and real-time data display.\u003c\/li\u003e\n  \u003cli\u003eFirmware updates and alarm settings via the app.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I power devices directly from the controller’s load output?\u003c\/h3\u003e\n\n\u003cp\u003eYes—this SmartSolar includes an intelligent load output that can switch loads off at a configurable voltage to protect the battery. That feature makes it suitable for lighting, pumps or other DC loads that should be protected from battery over-discharge without extra relays.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfigurable disconnect voltage to protect battery reserve.\u003c\/li\u003e\n  \u003cli\u003eSecure direct powering of DC loads from the controller.\u003c\/li\u003e\n  \u003cli\u003eAutomatic reconnection when battery voltage recovers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, RV and boat owners, tiny-home builders, and off-grid hobbyists who need a small-footprint MPPT controller with strong monitoring and synchronization capabilities will find this SmartSolar model well suited to 12V and 24V battery systems. Its balance of advanced MPPT performance, app connectivity, and intelligent load control makes it ideal for anyone who wants efficient energy harvest, battery protection, and straightforward system management without adding unnecessary complexity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What voltage systems does this controller support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports 12V and 24V battery systems and auto-detects the system voltage for proper charging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can multiple SmartSolar units operate together?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—multiple units can synchronize their charging stages to behave as a single coordinated charging system.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56835430449492,"sku":"B075NTT8GH","price":88.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-smartsolar-front-panel_9b6687f1-7d57-41a5-b685-676fdf7f96e8.jpg?v=1787056626"},{"product_id":"victron-energy-smartsolar-mppt-solar-charge-controller-75v-15a-bluetooth-12-24v-with-fast-mppt-and-adjustable-load","title":"Victron Energy SmartSolar MPPT Solar Charge Controller 75V 15A — Bluetooth, 12\/24V with fast MPPT and adjustable load","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy SmartSolar MPPT 75V 15A is a Bluetooth-enabled solar charge controller that maximizes PV power, protects batteries, and lets you monitor and configure your system remotely.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompact yet capable, this SmartSolar MPPT handles 75V input and up to 15A output for 12V or 24V battery banks. It uses fast maximum power point tracking (MPPT) and intelligent charge profiles to extract more energy from your panels, while offering synchronized multi-controller operation and an adjustable load output. Built-in Bluetooth and the VictronConnect app provide setup, live readouts, firmware updates, and 30-day performance history for easy upkeep.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this controller increase solar output on partly shaded days?\u003c\/h3\u003e\n\u003cp\u003eThe SmartSolar uses rapid MPPT algorithms that continuously track the panel’s best operating point, reacting to changing light and shade. That responsiveness reduces lost energy when cloud cover or partial shade shifts across the array.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed MPPT sampling to find optimal voltage quickly\u003c\/li\u003e\n  \u003cli\u003eHandles complex panel behavior under uneven illumination\u003c\/li\u003e\n  \u003cli\u003eWorks with series or parallel panel configurations up to 75V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan multiple SmartSolar units work together on one battery bank?\u003c\/h3\u003e\n\u003cp\u003eYes—multiple SmartSolar controllers can synchronize so they cycle through charging stages together, reducing stress on the battery and improving overall system efficiency. Synchronization is automatic and permits coordinated bulk, absorption and float phases across controllers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAuto-synchronized charge stage switching for battery health\u003c\/li\u003e\n  \u003cli\u003eScales solar input by adding additional controllers\u003c\/li\u003e\n  \u003cli\u003eMaintains unified charge algorithms across devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectivity and monitoring features are available?\u003c\/h3\u003e\n\u003cp\u003eBuilt-in Bluetooth lets you pair the controller with the VictronConnect app for configuration and live monitoring. You can view real-time metrics, access the last 30 days of system performance, change battery presets, update firmware, and set alarms from your phone or tablet.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVictronConnect app for iOS and Android configuration\u003c\/li\u003e\n  \u003cli\u003eReal-time voltage, current and power readouts plus history\u003c\/li\u003e\n  \u003cli\u003eRemote firmware updates and alarm configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the intelligent load output protect my battery and devices?\u003c\/h3\u003e\n\u003cp\u003eThe SmartSolar includes a configurable load output that can power DC devices directly and disconnect them automatically if battery voltage falls too low. You choose the disconnect thresholds to prioritize essential loads and prevent deep discharge.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSettable low-voltage disconnect to protect battery longevity\u003c\/li\u003e\n  \u003cli\u003eDirectly powers DC loads when solar and battery conditions allow\u003c\/li\u003e\n  \u003cli\u003eAutomatic reconnect when voltage returns to safe levels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Victron Energy SmartSolar MPPT 75V 15A is aimed at DIY solar installers, van and boat owners, tiny-home builders, and off-grid hobbyists who need a reliable, compact MPPT controller with smart monitoring. It’s ideal where space is limited but efficient energy harvesting, battery care, and remote oversight are required. If you plan to expand your array later, the controller’s synchronization and configurable options make scaling straightforward.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What battery voltages does the SmartSolar 75V 15A support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports both 12V and 24V battery systems with automatic detection and appropriate charging profiles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I update the controller firmware via my phone?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, firmware updates are available through the VictronConnect app using the built-in Bluetooth connection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56835430613332,"sku":"B075NQQRPD","price":108.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-energy-smartsolar-front-view.jpg?v=1787056630"},{"product_id":"victron-energy-orion-tr-dc-to-dc-converter-12-24v-isolated-high-efficiency-rugged-ip43-enclosure","title":"Victron Energy Orion-Tr DC-to-DC Converter 12\/24V — isolated \u0026 high-efficiency, rugged IP43 enclosure","description":"\u003cp\u003e\u003cstrong\u003eVictron Energy's Orion-Tr DC to DC Converter is a compact, high-efficiency unit that converts and stabilizes DC power between battery systems for vehicles, boats, and off-grid setups.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned to transfer energy reliably from one 12\/24 V battery bank to another, the Orion-Tr series provides efficient step-up or step-down conversion with models available in isolated and non-isolated versions. It’s built for installers and system builders who need dependable voltage regulation, reduced heat loss, and a rugged enclosure suitable for occasional moisture exposure. The screw-terminal wiring and multiple configuration options make it straightforward to integrate into alternator-charged systems, leisure battery banks, and mobile power installations.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Orion-Tr improve energy efficiency in a vehicle or marine system?\u003c\/h3\u003e\n\u003cp\u003eThe Orion-Tr uses modern power conversion techniques to keep energy loss low and minimize heat generation. Higher efficiency means longer run times from the same source and less cooling infrastructure required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh conversion efficiency reduces wasted power and extends battery runtime.\u003c\/li\u003e\n  \u003cli\u003eLower heat output simplifies mounting options, often avoiding extra cooling components.\u003c\/li\u003e\n  \u003cli\u003eAvailable wattage and amperage choices let you match converter size to system demand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and durability features does this converter offer?\u003c\/h3\u003e\n\u003cp\u003eWhen mounted correctly, the Orion-Tr carries an IP43 rating that protects against splashes and light moisture, making it suitable for many mobile and marine environments. The rugged housing and secure terminals ensure a durable connection in vibration-prone installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP43 splash-resistant enclosure for increased reliability in damp settings.\u003c\/li\u003e\n  \u003cli\u003eScrew-terminal connections for robust, vibration-resistant wiring.\u003c\/li\u003e\n  \u003cli\u003eDesign reduces internal heat buildup, preserving electronic components over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich installation and wiring considerations should I know before buying?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward thanks to screw terminals, but correct ventilation and secure mounting are essential to preserve the IP43 protection and maintain performance. Select a model with the right voltage and amperage rating for your input and output battery banks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eScrew terminals simplify wiring; no special tools required beyond common hand tools.\u003c\/li\u003e\n  \u003cli\u003eMount on a vertical surface with the connector side down to maintain splash protection.\u003c\/li\u003e\n  \u003cli\u003eChoose isolated or non-isolated based on system grounding and battery configuration needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich system types and users benefit most from an Orion-Tr converter?\u003c\/h3\u003e\n\u003cp\u003eThe Orion-Tr is targeted at installers, vehicle upfitters, boat owners, and off-grid enthusiasts who need compact, dependable DC-to-DC conversion. It’s particularly useful where alternators and multiple battery banks must be charged or balanced while preserving electrical isolation where required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecreational vehicles and camper vans with separate starter and leisure batteries.\u003c\/li\u003e\n  \u003cli\u003eMarine systems that require reliable charging with limited space and moisture exposure.\u003c\/li\u003e\n  \u003cli\u003eMobile service vehicles and telecom power setups needing stable DC distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Victron Energy Orion-Tr DC to DC Converter is ideal for anyone building or upgrading mobile power systems that require efficient DC voltage conversion, simple installation, and modest splash protection. Choose the correct model and isolation type to match your battery layout and installation environment for the best performance and longevity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the Orion-Tr between two different voltage battery banks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Orion-Tr supports step-up or step-down conversion; choose the correct input\/output model for your battery voltages.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Orion-Tr require special cooling or enclosure to meet IP43 rating?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special enclosure is needed, but mount vertically with connector side down and allow ventilation to maintain IP43 splash resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56837215813972,"sku":"B01D082AX8","price":94.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-orion-tr-front-panel_180adcd3-9a26-4c69-8035-43ca60ce5403.jpg?v=1787059107"},{"product_id":"victron-energy-orion-tr-dc-dc-converter-isolated-model-12v-rugged-high-efficiency-with-ip43-protection","title":"Victron Energy Orion-Tr DC-DC Converter Isolated Model 12V — Rugged, High-Efficiency with IP43 Protection","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy Orion-Tr DC to DC Converter is a rugged, high-efficiency power converter that safely transfers and conditions DC power between battery systems in vehicles, boats, and mobile installations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for demanding mobile and off-grid environments, the Orion-Tr series converts one DC voltage level to another while optimizing efficiency and limiting heat. Available in isolated and non-isolated models and multiple voltage\/amperage ratings, these converters are built for professional installers, fleet operators, and DIYers who need stable auxiliary power without complex setup.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Orion-Tr improve power reliability in vehicles and boats?\u003c\/h3\u003e\n\u003cp\u003eThe Orion-Tr conditions and regulates output voltage so sensitive electronics and secondary batteries see a steady, safe supply. It prevents over- or under-voltage situations and reduces stress on components, extending their usable life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStable output suitable for charging auxiliary batteries or powering accessories\u003c\/li\u003e\n  \u003cli\u003eAvailable isolated models to avoid ground loops and interference\u003c\/li\u003e\n  \u003cli\u003eBuilt-in protections reduce the risk of damage from voltage spikes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat efficiency and thermal performance can I expect?\u003c\/h3\u003e\n\u003cp\u003eThese converters use advanced conversion topology to keep energy loss low and generate less wasted heat than older designs. Lower heat output increases overall efficiency and helps the unit run reliably in enclosed compartments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh conversion efficiency reduces battery draw and extends runtime\u003c\/li\u003e\n  \u003cli\u003eReduced heat generation simplifies placement and ventilation needs\u003c\/li\u003e\n  \u003cli\u003eSensible thermal design supports continuous operation under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what protections are included?\u003c\/h3\u003e\n\u003cp\u003eOrion-Tr units are made for straightforward wiring with screw terminals and standard mounting options, so most installers can fit them without special tools. When mounted according to Victron’s instructions, the converter offers IP43 splash resistance for protection against occasional moisture.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eScrew terminal connections for quick, secure wiring\u003c\/li\u003e\n  \u003cli\u003eIP43 splash-resistant rating when correctly installed\u003c\/li\u003e\n  \u003cli\u003eAvailable in a range of voltage and amperage variants to match systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich model should I choose for isolated vs non-isolated installations?\u003c\/h3\u003e\n\u003cp\u003eIf your installation needs electrical separation between input and output—such as avoiding ground loops or isolating different battery banks—select an isolated Orion-Tr model. For simpler, grounded systems where isolation isn’t necessary, non-isolated versions provide a compact, cost-effective solution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIsolated units protect against ground loop noise and permit separate battery negative points\u003c\/li\u003e\n  \u003cli\u003eNon-isolated units deliver efficient conversion where shared grounding is acceptable\u003c\/li\u003e\n  \u003cli\u003eMultiple voltage and current options let you match power needs precisely\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Victron Energy Orion-Tr DC to DC Converter is aimed at professional installers, van and RV builders, marine electricians, and DIY mobile power enthusiasts who need a dependable, efficient way to convert and manage DC power between battery systems. Choose the model that matches your voltage, amperage, and isolation requirements for a durable solution that reduces energy loss and simplifies system design.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the Orion-Tr be mounted near moisture-prone areas?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—when installed according to instructions, the Orion-Tr offers IP43 splash resistance suitable for occasional moisture exposure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an isolated model for battery charging?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Choose an isolated model if you require electrical separation or to avoid ground loops; non-isolated works where shared grounding is acceptable.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56843562778964,"sku":"B01M0YCDJ8","price":154.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-orion-tr-front-panel_ae5bf559-a94d-4b99-9fa1-4f3059c64253.jpg?v=1787080704"},{"product_id":"victron-energy-smartsolar-mppt-solar-charge-controller-100v-15a-12-24v-bluetooth-app-configurable-load-output","title":"Victron Energy SmartSolar MPPT Solar Charge Controller 100V 15A (12\/24V) — Bluetooth, App‑Configurable, Load Output","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy SmartSolar MPPT 100V 15A (12\/24V) is a compact, app-configurable solar charge controller that maximizes PV harvest while protecting and prolonging battery life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for small to medium off-grid and vehicle solar systems, this SmartSolar MPPT converts panel output to the best charging profile for 12V or 24V batteries, supports synchronized multi-controller setups, and connects wirelessly to VictronConnect for monitoring and configuration. The unit blends fast maximum power point tracking (MPPT) with intelligent charge algorithms and an integrated load output so you can manage charging and loads from a single device.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this controller increase energy from my solar panels?\u003c\/h3\u003e\n\u003cp\u003eThe SmartSolar uses fast MPPT tracking to locate the optimal voltage\/current point from your panels and continuously adjusts to changing light and partial shading. This reduces lost generation versus simpler charge controllers and improves daily energy yield.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUltra-fast MPPT algorithm that responds to irradiance and temperature changes\u003c\/li\u003e\n  \u003cli\u003eOptimizes power even when panels are partially shaded\u003c\/li\u003e\n  \u003cli\u003eSupports up to 100V PV open-circuit voltage for larger panel arrays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan it manage battery health and charging for different battery types?\u003c\/h3\u003e\n\u003cp\u003eYes — the controller applies adaptive charging profiles to help maintain battery longevity and performance. Use VictronConnect to select appropriate battery presets, adjust charge voltages, and activate advanced charging behaviors tailored to lead‑acid or lithium systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfigurable charge algorithms via VictronConnect app\u003c\/li\u003e\n  \u003cli\u003ePreset and custom battery settings for lead‑acid and lithium\u003c\/li\u003e\n  \u003cli\u003eAutomatic stage switching and synchronized charging for multiple units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectivity and control features are available?\u003c\/h3\u003e\n\u003cp\u003eThe SmartSolar supports Bluetooth connection to VictronConnect for real‑time monitoring, 30‑day performance history, firmware updates, and alarm configuration. Multiple units can synchronize so several controllers operate as a coordinated charging system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWireless VictronConnect monitoring and configuration\u003c\/li\u003e\n  \u003cli\u003e30-day logging for performance review and troubleshooting\u003c\/li\u003e\n  \u003cli\u003eFirmware updates and alarms via the app\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I power devices and protect the battery with this controller?\u003c\/h3\u003e\n\u003cp\u003eIt includes an intelligent load output that lets you power a DC load directly from the controller and set a disconnect voltage to prevent deep discharge. The controller will automatically cut loads when battery voltage falls below your configured threshold, helping to protect battery capacity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfigurable low-voltage disconnect for connected loads\u003c\/li\u003e\n  \u003cli\u003eDirect DC load output managed by the controller\u003c\/li\u003e\n  \u003cli\u003eProtects battery life by preventing excessive discharge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: The Victron Energy SmartSolar MPPT 100V 15A (12\/24V) is ideal for RV owners, small boat installations, off-grid cabins, and anyone running modest 12V or 24V battery-based solar systems who wants reliable MPPT performance, app-based monitoring, and the option to scale with multiple synchronized controllers. It suits users who need a modern, configurable controller that balances compact size with advanced functionality.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What battery voltages does this SmartSolar support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports 12V and 24V battery systems and automatically detects system voltage for proper charging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I monitor the controller remotely?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — use the VictronConnect app via Bluetooth for live data, logs, firmware updates, and settings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56843769250132,"sku":"B075NQH3QW","price":112.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-smartsolar-front-view.jpg?v=1787082292"},{"product_id":"victron-energy-smartsolar-mppt-solar-charge-controller-100v-20a-48v-high-efficiency-mppt-with-bluetooth-monitoring","title":"Victron Energy SmartSolar MPPT solar charge controller 100V 20A (48V) — high-efficiency MPPT with Bluetooth monitoring","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy SmartSolar MPPT 100V 20A (48V) is a high-efficiency solar charge controller that maximizes solar harvest while protecting and managing your battery bank.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for off-grid and hybrid systems, this SmartSolar MPPT controller uses fast maximum power point tracking and intelligent charging algorithms to convert more sunlight into usable energy, even under partial shading or variable weather. With built-in Bluetooth connectivity and synchronized charging capability, it offers real-time monitoring and consistent, battery-friendly charging across multi-controller arrays.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SmartSolar MPPT improve solar output compared with a basic charge controller?\u003c\/h3\u003e\n\u003cp\u003eThis MPPT controller continually finds the solar array’s optimum operating point and adapts to changing light and temperature. That means it extracts more wattage from the panels than a pulse-width or simple PWM regulator, particularly when conditions are non-ideal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast maximum power point tracking for higher energy capture\u003c\/li\u003e\n  \u003cli\u003ePerforms well under partial shade and fluctuating irradiance\u003c\/li\u003e\n  \u003cli\u003eSupports up to 100V PV open-circuit input for larger panel arrays\u003c\/li\u003e\n  \u003cli\u003eMaintains stable output for consistent battery charging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat battery types and voltages can this 48V controller support safely?\u003c\/h3\u003e\n\u003cp\u003eThe unit is configured for 48V battery banks and includes presets for common battery chemistries, making setup straightforward. Intelligent charge profiles and synchronized multi-controller operation help protect batteries from overcharge and prolong usable life when properly configured.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePreset profiles for lead‑acid, GEL, AGM and compatible chemistries\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for 48V systems with adaptive charging curves\u003c\/li\u003e\n  \u003cli\u003eMultiple controllers can synchronize charge stages for uniform battery care\u003c\/li\u003e\n  \u003cli\u003eConfigurable via VictronConnect for custom battery settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectivity and monitoring features are available through VictronConnect?\u003c\/h3\u003e\n\u003cp\u003eBuilt-in Bluetooth lets you view live system data and 30 days of performance history from your phone or tablet. The app also allows firmware updates, alarm configuration and quick changes to charge settings without additional hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time power, voltage and current monitoring over Bluetooth\u003c\/li\u003e\n  \u003cli\u003e30-day performance logging accessible in-app for troubleshooting\u003c\/li\u003e\n  \u003cli\u003eFirmware updates and device configuration through VictronConnect\u003c\/li\u003e\n  \u003cli\u003eSet alarms and thresholds to protect battery and loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the controller handle direct loads and system reliability?\u003c\/h3\u003e\n\u003cp\u003eThe SmartSolar MPPT includes an intelligent load output that can power DC loads and automatically disconnect them when battery voltage falls too low. This feature helps prevent deep discharge and ensures critical loads are shut off before battery damage occurs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfigurable low-voltage disconnect for connected DC loads\u003c\/li\u003e\n  \u003cli\u003eAutomatic reconnection when battery voltage recovers to safe levels\u003c\/li\u003e\n  \u003cli\u003eReliable operation across varying PV input thanks to MPPT algorithms\u003c\/li\u003e\n  \u003cli\u003eSynchronizes with other controllers to balance load and charging stages\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Victron Energy SmartSolar MPPT 100V 20A (48V) is aimed at homeowners, van-lifers, marine systems and small off-grid installations that need efficient solar harvesting, precise battery management and remote monitoring. Choose this controller if you want improved energy yield from your panels, the flexibility to expand with synchronized units, and the convenience of phone-based configuration and diagnostics.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this MPPT controller work with panels over 100V open-circuit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The SmartSolar supports PV inputs up to 100V open-circuit; using higher voltage risks damage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it require extra hardware to monitor performance remotely?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No extra hardware needed—built-in Bluetooth and the VictronConnect app provide real-time monitoring and logs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56843769282900,"sku":"B075NPQHQK","price":117.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-energy-smartsolar-front-panel_3cbbf68f-7f82-4421-8e20-e8f9cd5abaff.jpg?v=1787082294"},{"product_id":"victron-energy-smart-battery-shunt-6-5-70v-300a-bluetooth-high-accuracy-battery-monitor","title":"Victron Energy Smart Battery Shunt 6.5–70V 300A — Bluetooth high-accuracy battery monitor","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy Smart Battery Shunt is a compact, high-accuracy battery monitor and shunt that measures voltage, current, state of charge and more, with Bluetooth and VE.Smart networking for remote and system-wide monitoring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for mobile, marine, RV, camper and off-grid battery systems, the Smart Battery Shunt combines precision shunt technology with wireless convenience. It delivers detailed battery metrics to the VictronConnect app and can share data with other Victron devices or a VRM portal for remote oversight. Lightweight and unobtrusive, it replaces bulky analog meters with digital, app-driven insights while providing auxiliary connections for expanded monitoring options.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Smart Battery Shunt show real-time battery health?\u003c\/h3\u003e\n\n\u003cp\u003eThe unit continuously measures current, voltage and accumulated amp-hours via its precision shunt element and reports analytics to your phone and system controllers. You get instant feedback on State of Charge, time remaining and historical extremes so you can plan usage or charging more intelligently.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCurrent, voltage and amp-hour tracking updated live\u003c\/li\u003e\n  \u003cli\u003eCalculated State of Charge and Time Remaining\u003c\/li\u003e\n  \u003cli\u003eRecords deepest discharge and highest\/lowest recorded voltages\u003c\/li\u003e\n  \u003cli\u003eAlarm notifications pushed in-app for urgent events\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectivity and integrations are available?\u003c\/h3\u003e\n\n\u003cp\u003eThe Smart Shunt connects wirelessly to the VictronConnect app via Bluetooth for local monitoring and configuration. It also supports VE.Smart Networking to share sensor data with other Victron components and can link to a communication center for VRM remote management and DVCC system-wide battery control.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBluetooth connection for smartphone setup and readout\u003c\/li\u003e\n  \u003cli\u003eVE.Smart Networking to optimize charging across devices\u003c\/li\u003e\n  \u003cli\u003eOptional integration with VRM for cloud monitoring\u003c\/li\u003e\n  \u003cli\u003eCompatible with DVCC for coordinated charge\/discharge control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat additional monitoring or expansion options exist?\u003c\/h3\u003e\n\n\u003cp\u003eAn auxiliary port expands functionality: use it for a second monitoring channel, midpoint sensing for multi-bank setups, or attach an optional temperature sensor. The same hardware can function as a general-purpose DC energy meter, making it a flexible tool for modern battery installations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAux cable for second battery monitor or midpoint sensing\u003c\/li\u003e\n  \u003cli\u003eOptional temperature sensor input to refine battery calculations\u003c\/li\u003e\n  \u003cli\u003eOperates as a DC energy meter for load and generation tracking\u003c\/li\u003e\n  \u003cli\u003eWide operating voltage range for 12V–48V systems (6.5V–70V input range)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow accurate and durable is the measurement system?\u003c\/h3\u003e\n\n\u003cp\u003eThe Smart Shunt uses a precision current shunt and calibrated electronics to deliver reliable results for amp-hours, charge cycles and voltage extremes. It’s built for installation inside battery compartments or electrical enclosures and engineered to work with high-current systems up to 300A continuous.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-precision shunt technology for dependable readings\u003c\/li\u003e\n  \u003cli\u003eRated for continuous 300A current measurement\u003c\/li\u003e\n  \u003cli\u003eWide input voltage tolerance for varied battery chemistries\u003c\/li\u003e\n  \u003cli\u003eRobust construction suitable for mobile and marine environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Victron Energy Smart Battery Shunt is intended for anyone who needs accurate, app-driven battery intelligence—RVers, boat owners, off-grid homeowners, electricians building hybrid systems, and integrators who require networked battery data. It’s especially useful when space is limited but detailed battery diagnostics and integration with other Victron components are important.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What battery voltages and current does the Smart Shunt support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It accepts 6.5V–70V input and measures up to 300A continuous, making it suitable for most 12V–48V battery setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I view battery data remotely?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — view live data via Bluetooth in the VictronConnect app and enable VRM for cloud-based remote monitoring.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56843928338772,"sku":"B0DJ2P2XN5","price":95.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-smart-shunt-front-panel.jpg?v=1787083198"},{"product_id":"victron-energy-bluesolar-mppt-solar-charge-controller-100v-20a-48v-mppt-harvesting-bluetooth-ready","title":"Victron Energy BlueSolar MPPT Solar Charge Controller 100V 20A 48V — MPPT harvesting, Bluetooth-ready","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Energy BlueSolar MPPT 100V, 20A (48V) is a maximum power point tracking solar charge controller that converts more available sunlight into battery-ready energy while protecting battery life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompact yet powerful, this BlueSolar MPPT controller is designed for off-grid systems, mobile installations and small to medium battery banks that need efficient, reliable charging. It supports up to 100V PV input and delivers controlled charging at up to 20A for 48V battery systems. Built with Victron’s fast-tracking MPPT algorithms, it improves harvest from panels under changing light and partial shade, and offers optional remote monitoring via a separately sold Bluetooth dongle.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the BlueSolar MPPT get more power from my panels?\u003c\/h3\u003e\n\u003cp\u003eVictron’s MPPT electronics continuously search for the panel voltage that yields the highest output. When conditions change—clouds, temperature shifts, or partial shading—the controller re-optimizes, reducing lost production and increasing daily energy yield.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed MPPT algorithm for fast response to irradiance changes\u003c\/li\u003e\n  \u003cli\u003eOperates with PV input voltages up to 100V for flexible array configurations\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce mismatch losses when panels are partially shaded\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat system sizes and batteries are compatible with this model?\u003c\/h3\u003e\n\u003cp\u003eThis unit is sized for small-to-medium 48V battery systems and solar arrays where a 20A charging rate is appropriate. It’s suitable for RVs, small off-grid cabins, auxiliary battery banks, and compact marine installations, provided the panel array and battery specifications match the controller limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNominal charge current: 20A at 48V battery systems\u003c\/li\u003e\n  \u003cli\u003ePV input rating up to 100V allows versatile panel wiring\u003c\/li\u003e\n  \u003cli\u003eWorks with lead‑acid or lithium batteries when set to the correct charge profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I monitor and adjust settings remotely?\u003c\/h3\u003e\n\u003cp\u003eThe BlueSolar MPPT itself does not include built-in Bluetooth, but you can add Victron’s Bluetooth dongle (sold separately) to enable wireless monitoring and configuration through VictronConnect. With the dongle attached, you can view live statistics, alter charge parameters and download logs from your smartphone or tablet.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth dongle enables VictronConnect mobile app access\u003c\/li\u003e\n  \u003cli\u003eRemote firmware updates and parameter adjustments possible via app\u003c\/li\u003e\n  \u003cli\u003eLocal LED indicators provide basic status without wireless access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the BlueSolar protect my batteries and electronics?\u003c\/h3\u003e\n\u003cp\u003eBeyond harvesting power, the controller implements intelligent charge stages and safety features to extend battery life and prevent system damage. It prevents overcharging, limits current during high input, and communicates faults via status indicators so you can address wiring or panel problems quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-stage charging profiles to safely bring batteries to full state of charge\u003c\/li\u003e\n  \u003cli\u003eBuilt-in protection against reverse polarity and short circuits\u003c\/li\u003e\n  \u003cli\u003eThermal management and intelligent current limiting at high temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Installers, DIY solar enthusiasts and owners of small off-grid systems who need an efficient, rugged MPPT controller for 48V battery banks. Choose this BlueSolar model if you want high conversion efficiency, flexible PV input up to 100V, and the option to add Bluetooth monitoring later. If you require integrated wireless connectivity out of the box, consider Victron’s SmartSolar lineup instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this model include Bluetooth?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — Bluetooth is not built in. Add Victron’s Bluetooth dongle (sold separately) for wireless monitoring via VictronConnect.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What PV input voltage does it support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It accepts PV input voltages up to 100V, allowing flexible panel string configurations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":56844373000532,"sku":"B08LBWKTNF","price":110.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/victron-blue-solar-front.jpg?v=1787085590"}],"url":"https:\/\/gardenluxe.co.uk\/collections\/brand-victron-energy.oembed","provider":"Gardenluxe Uk","version":"1.0","type":"link"}