{"title":"Stens","description":"\u003cp\u003eBrowse our full Stens range. Every order ships free across the UK, with free 30-day returns as standard.\u003c\/p\u003e","products":[{"product_id":"stens-replacement-deck-belt-for-exmark-ztr-60-deck-265-060-covered-oem-fit","title":"Stens replacement deck belt for Exmark ZTR 60\" deck 265-060 — covered OEM-fit","description":"\u003cp\u003e\u003cstrong\u003eStens 265-060 is a covered replacement engine-to-deck belt designed to restore reliable power transfer for Exmark zero-turn mowers with a 60\" deck, replacing OEM part 103-4014.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your Exmark ZTR's deck drive belt shows wear, cracking, or slipping, the right replacement part gets the mower back to cutting performance without downtime. This Stens OEM-compatible belt is built to the same length and width specifications as the original so it routes and tensions correctly on 60\" decks. It ships in a branded sleeve and is sized to match factory routing for a straightforward swap.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this belt match the original Exmark part?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 265-060 mirrors the critical dimensions and covered construction of Exmark part 103-4014, so it fits the same pulleys and idlers. Its covered design helps resist debris and abrasive wear compared with raw belts. You can expect the same belt path and tension points used in factory installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact length: 116 inches for correct routing\u003c\/li\u003e\n  \u003cli\u003eWidth: 5\/8 inch to match pulley groove\u003c\/li\u003e\n  \u003cli\u003eCovered belt type for debris protection\u003c\/li\u003e\n  \u003cli\u003ePackaged in a branded sleeve for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and steps are needed to install it?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a routine maintenance task for most service techs and mechanically inclined owners. Basic hand tools—socket set, wrenches, and a pry bar or belt tensioner tool—are usually sufficient to remove the old belt and re-route the new one. Always support the mower and follow manufacturer safety procedures before working under or around the deck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: sockets, wrenches, belt tool or pry bar\u003c\/li\u003e\n  \u003cli\u003eProcedure: disengage blades, lift deck, release tension, remove and replace belt\u003c\/li\u003e\n  \u003cli\u003eCheck alignment and tension before first use\u003c\/li\u003e\n  \u003cli\u003eFollow Exmark safety steps and disconnect power source\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this belt affect mower performance?\u003c\/h3\u003e\n\u003cp\u003eUsing a correctly sized covered belt keeps consistent power transfer between the engine and mower deck, reducing slippage and uneven cutting. A fresh belt helps restore blade speed and even cutting height, while the covered design reduces premature wear from grit and grass. Replacing worn belts prevents extra stress on pulleys and bearings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves blade speed consistency\u003c\/li\u003e\n  \u003cli\u003eReduces slipping and burnt-rubber odors\u003c\/li\u003e\n  \u003cli\u003eProtects against abrasive debris for longer life\u003c\/li\u003e\n  \u003cli\u003eHelps maintain even cutting and reduced vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this belt fit my specific Exmark model?\u003c\/h3\u003e\n\u003cp\u003eThis belt is specified for Exmark zero-turn models equipped with a 60\" mowing deck that originally used part number 103-4014. Confirm your parts manual or existing belt part number before ordering to ensure compatibility. If your mower uses a different deck width or belt routing, select the belt that matches those specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Exmark ZTR with 60\" deck\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for Exmark 103-4014\u003c\/li\u003e\n  \u003cli\u003eVerify deck size and current part number first\u003c\/li\u003e\n  \u003cli\u003eContact dealer if your mower has nonstandard configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Lawn care professionals, landscapers, and owners of Exmark zero-turn mowers who need a reliable, OEM-compatible deck drive belt to maintain cutting performance. It’s ideal for anyone replacing a worn or damaged engine-to-deck belt on a 60\" deck who wants a covered belt built to original dimensions for straightforward installation and dependable service.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFeature: Sold on Amazon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt replace Exmark part 103-4014?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Stens 265-060 is a direct replacement for Exmark 103-4014 on 60\" decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt is 116\" long and 5\/8\" wide with a covered construction.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56798797463892,"sku":"B001OK8LI8","price":66.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-belt-front-packaging.jpg?v=1786727368"},{"product_id":"stens-engine-maintenance-kit-for-briggs-stratton-5127b-1-ea-aftermarket-tune-up-parts-kit","title":"Stens Engine Maintenance Kit for Briggs \u0026 Stratton 5127B — 1 ea, aftermarket tune-up parts kit","description":"\u003cp\u003e\u003cstrong\u003eStens Engine Maintenance Kit for Briggs \u0026amp; Stratton 5127B is a ready-to-install aftermarket replacement kit designed to keep compatible small engines running reliably between services.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt by Stens—a long-established supplier of aftermarket parts based in Jasper, Indiana and now part of Arrowhead Engineered Products—this maintenance kit is intended for routine upkeep of Briggs \u0026amp; Stratton engines that accept the 5127B service configuration. Stens focuses on guaranteed parts quality, fast delivery, and strong customer support, making this kit a practical option for homeowners, landscapers, and rental shops that need dependable replacement components without sourcing OEM packages.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does this maintenance kit include and how does it fit my Briggs \u0026amp; Stratton engine?\u003c\/h3\u003e\n\u003cp\u003eThe Stens kit is assembled for compatibility with Briggs \u0026amp; Stratton models specified by the 5127B part grouping and uses Stens’ aftermarket standard for replacement parts. While exact included items can vary by SKU, the kit is packaged to replace common wear components that are typically serviced together.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to match the fitment parameters of Briggs \u0026amp; Stratton engines listed for the 5127B grouping\u003c\/li\u003e\n  \u003cli\u003ePackaged as an aftermarket replacement under Stens model number 785-521\u003c\/li\u003e\n  \u003cli\u003eSold as a single kit (ea, quantity 1) for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this kit help with routine maintenance tasks?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles the parts you most often change during regular engine servicing, reducing trips to multiple suppliers. Using a single, pre-selected kit helps streamline tune-ups and short service windows for equipment used in lawn, turf, and light agricultural work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSaves time by consolidating commonly replaced parts into one package\u003c\/li\u003e\n  \u003cli\u003eSupports scheduled maintenance intervals to sustain engine performance\u003c\/li\u003e\n  \u003cli\u003eHelps avoid downtime by providing ready-to-install replacement components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this replacement kit a quality alternative to OEM parts?\u003c\/h3\u003e\n\u003cp\u003eStens products are positioned as aftermarket alternatives with a focus on quality control and reliable fit. The company’s integration with Arrowhead Engineered Products expanded its supply chain and product development, supporting consistent part standards and broad availability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured and distributed under Stens’ aftermarket quality practices\u003c\/li\u003e\n  \u003cli\u003eBacked by Stens’ customer service and established dealer network\u003c\/li\u003e\n  \u003cli\u003ePackaged for safe shipping with measured package dimensions to ensure condition on arrival\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the package size and shipping details I should expect?\u003c\/h3\u003e\n\u003cp\u003eThis kit ships as a single packaged unit with declared package dimensions for shipping and storage. Knowing the package size helps plan for storage space and ensures it fits with other parts orders or service boxes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStens model number: 785-521\u003c\/li\u003e\n  \u003cli\u003ePackage length: 14.0157480172 inches\u003c\/li\u003e\n  \u003cli\u003ePackage width: 12.9133858136 inches; height: 11.6141732165 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Stens Engine Maintenance Kit is aimed at DIYers, lawn-care professionals, equipment rental operators, and maintenance technicians who service Briggs \u0026amp; Stratton small engines and prefer a trusted aftermarket source. It's a good fit for anyone seeking a consolidated parts solution that balances quality, availability, and support from an experienced aftermarket supplier.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this Stens kit fit my Briggs \u0026amp; Stratton engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This kit is intended for engines specified under the Briggs \u0026amp; Stratton 5127B grouping; verify compatibility against your engine model and serial before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the package dimensions for shipping and storage?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit ships in a single package: length 14.02\", width 12.91\", height 11.61\" (approx.).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56798906384724,"sku":"B004HS8JPO","price":99.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-front-packaging-briggs-5127b.jpg?v=1786727743"},{"product_id":"stens-solid-state-module-for-briggs-stratton-john-deere-black-direct-fit-restores-spark-timing","title":"Stens Solid State Module for Briggs \u0026 Stratton \u0026 John Deere, Black — Direct-Fit, Restores Spark Timing","description":"\u003cp\u003e\u003cstrong\u003eThe Stens 440-417 solid state module is a direct-fit electronic ignition replacement designed to restore reliable spark timing for compatible Briggs \u0026amp; Stratton and John Deere small engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Stens module is built to exceed OEM specifications and serves as a replacement for several common factory part numbers from Briggs \u0026amp; Stratton and John Deere. It is intended for use with the specified spark plug and a range of engine models that originally used the listed ignition module numbers. Before ordering, confirm compatibility with your engine’s original part number to ensure proper fit and function.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engine models and OEM numbers does this module replace?\u003c\/h3\u003e\n\u003cp\u003eThe 440-417 is cross-referenced to multiple Briggs \u0026amp; Stratton and John Deere ignition modules, making it a versatile replacement option for many small engines. It directly replaces several B\u0026amp;S part numbers and the John Deere PT15339 reference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces B\u0026amp;S numbers: 395326, 395492, 398265, 398811\u003c\/li\u003e\n  \u003cli\u003eListed as compatible with B\u0026amp;S codes like 176432, 192400, 196400 and more\u003c\/li\u003e\n  \u003cli\u003eCross-reference for John Deere: PT15339\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this solid state module improve engine starting and operation?\u003c\/h3\u003e\n\u003cp\u003eAs an electronic ignition component, the module controls timing and spark delivery, helping the engine start more consistently and maintain smoother running. Its solid state design is more resistant to wear than older mechanical parts, providing steadier performance under normal operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelivers consistent spark timing for reliable starts\u003c\/li\u003e\n  \u003cli\u003eSolid state construction reduces mechanical failure points\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet or exceed original equipment performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and compatibility details should I know?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically follows the OEM mounting points and wiring for the original module, but connector and terminal layouts can vary between engine families. Verify the exact part number on your old module or engine manual before replacing it to avoid mismatches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse with spark plug model 130-106 as recommended\u003c\/li\u003e\n  \u003cli\u003eConfirm fit by matching original module numbers before purchase\u003c\/li\u003e\n  \u003cli\u003eFollow engine manufacturer’s wiring and mounting instructions for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality assurances come with this replacement part?\u003c\/h3\u003e\n\u003cp\u003eStens backs this solid state module with a standard one-year warranty, indicating coverage against manufacturing defects under normal use. The product is manufactured to surpass original equipment specifications, giving added confidence in durability and performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-year limited warranty from Stens\u003c\/li\u003e\n  \u003cli\u003eBuilt to exceed OEM specifications for longevity\u003c\/li\u003e\n  \u003cli\u003eSold as a direct-fit replacement for listed OEM numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement module is aimed at owners, repair technicians, and small-engine service shops working on Briggs \u0026amp; Stratton and John Deere powered equipment that requires a reliable ignition module swap. It suits anyone repairing lawn mowers, generators, pressure washers, or other light-duty engines where the original module corresponds to the listed part numbers and compatibility codes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this module fit my Briggs \u0026amp; Stratton engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match your original part number to the listed B\u0026amp;S replacements (e.g., 395326, 395492) to confirm compatibility before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the unit come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Stens 440-417 solid state module includes a one-year warranty against manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56799084708180,"sku":"B000FOX5WG","price":71.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-solid-state-module-front-view.jpg?v=1786728716"},{"product_id":"stens-replacement-deck-belt-265-431-for-bad-boy-54-zt-elite-156-x-5-8-covered-continuous-loop","title":"Stens replacement deck belt 265-431 for Bad Boy 54\" ZT Elite – 156\" x 5\/8\", covered continuous loop","description":"\u003cp\u003e\u003cstrong\u003eThe Stens OEM Replacement Belt 265-431 is a covered 156\" x 5\/8\" deck belt designed to replace Bad Boy part 041-1560-00 on 54\" ZT Elite and CZT Elite mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty deck belt from Stens is built to meet OEM fit and function for specific Bad Boy zero-turn mower decks. It comes in branded sleeve packaging and is intended as a like-for-like replacement for worn or damaged deck drive belts. Before ordering, confirm fit by comparing part numbers or belt dimensions with your mower's original belt.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines is this belt compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThis belt is made to replace Bad Boy OEM 041-1560-00 and reference B-153. It fits the ZT Elite and CZT Elite models equipped with a 54\" deck. Compatibility is limited to those machines and deck size; cross-verify model and deck measurements before purchase.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplaces Bad Boy OEM: 041-1560-00\u003c\/li\u003e\n  \u003cli\u003eReference number: B-153\u003c\/li\u003e\n  \u003cli\u003eFits Bad Boy ZT Elite and CZT Elite with 54\" deck\u003c\/li\u003e\n  \u003cli\u003eBelt dimensions: 156\" length, 5\/8\" width\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the belt’s size and construction details?\u003c\/h3\u003e\n\n\u003cp\u003eThe belt is a covered, continuous-loop deck belt measuring 156 inches in circumference and 5\/8 inch in width. Its covered design helps shield internal cords from debris and abrasion, extending service life compared with uncovered belts. Packaging lists practical item dimensions and weight useful for storage or parts inventory.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eType: covered continuous deck belt\u003c\/li\u003e\n  \u003cli\u003eLength: 156\" (measured around the loop)\u003c\/li\u003e\n  \u003cli\u003eWidth: 5\/8\"\u003c\/li\u003e\n  \u003cli\u003ePackaging: branded sleeve for protection and identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install or replace this deck belt?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation typically requires removing the deck or lowering it to its service position, releasing tension from the idler pulleys, and routing the new belt around spindles and the drive pulley following the original path. Use the mower’s service manual for the exact routing diagram and pulley order to avoid misrouting. If you’re not comfortable with mower maintenance, a professional install will ensure correct tension and alignment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLower or support the deck for safe access\u003c\/li\u003e\n  \u003cli\u003eRelease idler tension before removing old belt\u003c\/li\u003e\n  \u003cli\u003eRoute new belt following OEM routing diagram\u003c\/li\u003e\n  \u003cli\u003eCheck tension and pulley alignment after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about fit verification and returns?\u003c\/h3\u003e\n\n\u003cp\u003eBecause belt fit depends on model year and deck configuration, verify the part number (041-1560-00) or the belt’s 156\" x 5\/8\" dimensions against your mower before buying. Keep original packaging and inspect the belt immediately upon receipt; if the part doesn’t match your equipment, follow the seller’s return policy for exchanges. Purchasing the correct belt upfront prevents downtime and additional shipping costs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirm Bad Boy part number or belt dimensions first\u003c\/li\u003e\n  \u003cli\u003eInspect belt on delivery for correct size and condition\u003c\/li\u003e\n  \u003cli\u003eRetain packaging for returns or warranty inquiries\u003c\/li\u003e\n  \u003cli\u003eContact a dealer if unsure about compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Stens replacement belt is intended for owners, service technicians, and fleet managers who maintain Bad Boy ZT Elite or CZT Elite mowers with 54\" decks and need a direct-fit, OEM-style deck belt. It’s suited for anyone replacing a worn, glazed, or damaged belt who wants a reliable, covered belt that matches the original equipment specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt fit Bad Boy ZT Elite 54\" decks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Stens belt replaces Bad Boy OEM 041-1560-00 and fits ZT Elite and CZT Elite 54\" decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt is 156 inches in length and 5\/8 inch wide; it is a covered deck belt.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56799262572884,"sku":"B01LZWPUWB","price":72.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-belt-front-packaging_b9b5c836-fcac-412a-bf35-5126e17fcd8d.jpg?v=1786730249"},{"product_id":"stens-v-idler-replacement-280-866-for-exmark-toro-decks-5-od-5-8-id-heavy-duty","title":"Stens V-Idler Replacement 280-866 for Exmark \u0026 Toro Decks — 5\" OD, 5\/8\" ID Heavy-Duty","description":"\u003cp\u003e\u003cstrong\u003eThe Stens 280-866 Heavy-Duty V-Idler is a rugged replacement idler pulley designed to restore V-belt tracking and reliable deck operation on compatible Exmark and Toro commercial mower decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf a worn or noisy idler is causing belt slippage, vibration, or uneven lift on your mower deck, the Stens 280-866 offers a direct, heavy-duty swap for select Exmark Lazer Z, Triton, Turf Tracer and Toro Z Master decks. Built to the OEM footprint and dimensions, this idler matches the original fit while delivering durable performance for service and field repairs.\u003c\/p\u003e\n\n\u003ch3\u003eWhat mower models and serial ranges does this V-idler fit?\u003c\/h3\u003e\n\u003cp\u003eThis V-idler replaces common factory idlers on a range of Exmark and Toro commercial decks. Always verify serial numbers listed by the OEM before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExmark Lazer Z: fits 52\", 60\", and 72\" decks (Serial No. 600,000 and higher)\u003c\/li\u003e\n  \u003cli\u003eExmark Triton decks and Turf Tracer hydro floating decks: specified serial ranges included\u003c\/li\u003e\n  \u003cli\u003eExmark Lazer Z deck group: Serial No. 102,000–370,000\u003c\/li\u003e\n  \u003cli\u003eToro Z Master and Z 250 series: compatible with many 1999–2021 models and later Z 500\/742XX series\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers: Exmark 1-603805 \/ 603805 and Toro 1-603805 \/ 99-4638\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the dimensions and hardware affect installation?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 280-866 is sized to match the original idler so it installs in the same bracket and accepts the same mounting shafts. Confirm the key dimensions and inner bore before mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeight (thickness): 1 1\/16\" to clear deck brackets and tension arms\u003c\/li\u003e\n  \u003cli\u003eInner diameter (ID): 5\/8\" to fit standard idler shafts and bolts\u003c\/li\u003e\n  \u003cli\u003eOuter diameter (OD): 5\" for correct V-belt contact and tracking\u003c\/li\u003e\n  \u003cli\u003eDesigned to accept the same fasteners and replace OEM units without bracket modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability can I expect from this heavy-duty idler?\u003c\/h3\u003e\n\u003cp\u003eConstructed to withstand commercial mowing environments, the Stens 280-866 offers improved wear resistance and consistent belt engagement when compared to a worn stock pulley. It reduces belt drift and helps stabilize deck belt tension.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty construction suited for daily use and rough turf applications\u003c\/li\u003e\n  \u003cli\u003eMaintains belt alignment to reduce premature belt wear and vibration\u003c\/li\u003e\n  \u003cli\u003eOEM-equivalent dimensions for plug-and-play replacement\u003c\/li\u003e\n  \u003cli\u003eSimple swap reduces downtime compared with rebuilding the original pulley\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I verify fitment before purchasing or installing?\u003c\/h3\u003e\n\u003cp\u003eDouble-check your mower’s deck model, deck size, and serial number against the compatibility list. Measure the old idler if uncertain and compare the three key dimensions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm deck width: 52\", 60\" or 72\" where applicable\u003c\/li\u003e\n  \u003cli\u003eCheck serial number ranges shown in OEM fitment notes\u003c\/li\u003e\n  \u003cli\u003eMeasure existing idler: 1 1\/16\" height, 5\/8\" ID, 5\" OD\u003c\/li\u003e\n  \u003cli\u003eCompare OEM part numbers 1-603805 \/ 603805 \/ 99-4638 if available\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? The Stens 280-866 Heavy-Duty V-Idler is aimed at professional landscapers, commercial equipment technicians, and serious homeowners who maintain Exmark or Toro decks listed in the fitment notes. If you need a direct, durable replacement that mirrors OEM dimensions and restores reliable belt tracking on large mowing decks, this idler provides an economical repair option to get decks back into service quickly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Stens 280-866 replace OEM part 1-603805?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is a direct replacement for Exmark and Toro part numbers 1-603805, 603805, and 99-4638 when the deck and serial ranges match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the key dimensions of this V-idler?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The idler measures 1 1\/16\" in height, has a 5\/8\" inner diameter, and a 5\" outer diameter.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56799316640084,"sku":"B001OKA1ZE","price":71.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-v-idler-front-view.jpg?v=1786731100"},{"product_id":"stens-steel-idler-pulley-for-bad-boy-zero-turn-mowers-5-3-4-diameter-oem-033-5000-033-5001-compatible","title":"Stens Steel Idler Pulley for Bad Boy Zero-Turn Mowers — 5-3\/4\" Diameter, OEM 033-5000\/033-5001 Compatible","description":"\u003cp\u003e\u003cstrong\u003eStens 280-916 is a steel idler pulley built to replace Bad Boy OEM 033-5000-00 and 033-5001-00 on compatible zero-turn mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Bad Boy zero-turn mower is showing belt slippage, odd noises, or reduced deck tension, the idler pulley is a common wear item. The Stens 280-916 is a steel replacement engineered to match the footprint and function of the original parts used on many Bad Boy models, including CZT Elite, MZ Magnum, Maverick, Outlaw XP, Revolt, Stand-On and ZT Elite machines. Before buying, confirm fitment against your mower’s parts list or OEM number to ensure proper compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pulley fit my Bad Boy mower?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 280-916 is manufactured to the same basic dimensions and mounting pattern as Bad Boy OEM 033-5000-00 and 033-5001-00. It installs in the idler location that maintains belt tension across the deck and transmission pulleys. Compare the listed measurements to your existing pulley to verify match-up.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall diameter (A): 5 3\/4\"\u003c\/li\u003e\n  \u003cli\u003eMount diameter (B): 5\"\u003c\/li\u003e\n  \u003cli\u003eThickness and bore sizes: C 1\/2\", D 2\", E 1\/2\", F 1\/2\"\u003c\/li\u003e\n  \u003cli\u003eMaterial: steel construction, V: 2 1\/2\" (profile)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect after replacing the pulley?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or damaged idler pulley restores proper belt routing and tension, reducing slip and belt wear. A correctly functioning pulley helps the cutting deck operate smoothly and can eliminate squeal or grinding noises that signal bearing or alignment problems. Using a steel replacement gives durable support under heavy mowing loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces belt slippage and premature belt failure\u003c\/li\u003e\n  \u003cli\u003eImproves deck drive smoothness and power transfer\u003c\/li\u003e\n  \u003cli\u003eCuts down on operational noise from worn bearings\u003c\/li\u003e\n  \u003cli\u003eSteel construction resists deformation under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check during swap?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with mower deck maintenance; the pulley mounts in the same location as the OEM part. You’ll typically need basic hand tools and should support the deck safely while working. Inspect the belt, mounting hardware, and nearby bearings and replace any worn components to avoid repeat failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse proper safety supports for the deck before working\u003c\/li\u003e\n  \u003cli\u003eRemove and compare old pulley measurements to confirm fit\u003c\/li\u003e\n  \u003cli\u003eReplace mounting bolts, washers, or spacers if corroded\u003c\/li\u003e\n  \u003cli\u003eCheck belt routing and tension after reassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this pulley work with my specific model year?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 280-916 is designed to be compatible with many Bad Boy models that use OEM 033-5000-00 or 033-5001-00, but fitment can vary by year and sub-model. Always cross-reference the OEM numbers or measure your existing pulley to ensure a match before purchasing. Color of the item may differ from OEM photos, but dimensions and function are the key factors for compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Bad Boy OEM numbers 033-5000-00 and 033-5001-00\u003c\/li\u003e\n  \u003cli\u003eCompatible models: CZT Elite, MZ Magnum, Maverick, Outlaw XP, Revolt, Stand-On, ZT Elite\u003c\/li\u003e\n  \u003cli\u003eConfirm with part numbers or exact dimensions before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Lawn care pros, fleet managers, and DIY mower owners who maintain Bad Boy zero-turns and need a robust, steel idler pulley replacement. If you own one of the compatible Bad Boy models and are experiencing belt or deck drive issues, this Stens replacement provides a durable option to restore reliable operation. Always verify fitment using OEM numbers or direct measurements before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pulley replace Bad Boy 033-5000-00?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, Stens 280-916 replaces Bad Boy OEM 033-5000-00 and 033-5001-00 when dimensions match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material is the Stens 280-916 pulley made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The pulley is made of steel for improved durability under mowing loads.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56799323128148,"sku":"B0BYKSCZK7","price":82.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-280-916-front-view.jpg?v=1786731188"},{"product_id":"stens-replacement-deck-belt-for-scag-v-ride-48-119-x-5-8-covered-oem-fit","title":"Stens Replacement Deck Belt for Scag V‑Ride 48\" (119\" x 5\/8\") Covered OEM Fit","description":"\u003cstrong\u003eStens 265-578 is a direct-fit covered deck belt designed to replace Scag 483966 for select 48\" V-Ride mower decks, measuring 119\" long and 5\/8\" wide.\u003c\/strong\u003e\n\n\u003cp\u003eIf your V‑Ride mower is slipping, losing deck engagement, or making rubbery noises, this Stens OEM replacement belt restores the original deck drive geometry without modifying pulleys or spindles. Manufactured to match Scag's sizing and covered construction, the belt is intended for use on 48\" Scag V‑Ride decks where the OEM Scag 483966 is specified. Installing the correct belt helps keep blade speed consistent and reduces wear on the deck's pulleys and idlers.\u003c\/p\u003e\n\n\u003ch3\u003eWill this belt fit my Scag mower model?\u003c\/h3\u003e\n\u003cp\u003eYes, the Stens 265-578 is cut to the same specifications as Scag 483966 to fit the listed V‑Ride models. Confirm compatibility by checking your mower model and deck size against the fit list before ordering. If you have a different deck width or a non‑V‑Ride chassis, a different belt number will be required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM part: Scag 483966\u003c\/li\u003e\n  \u003cli\u003eCompatible models: SMVR-48V, SMVR-52V, SVR48V-691FX, SVR52V-730FX (48\" deck)\u003c\/li\u003e\n  \u003cli\u003eDeck application: Designed specifically for deck drive routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the belt constructed and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThis is a covered belt: the textile or rubber cover protects the tension cords and improves tracking on pulleys. Covered belts resist contamination from grass, grit, and moisture better than raw V-belts, which helps extend service life and maintain consistent power transfer. Proper construction also reduces chatter and slippage under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovered design guards internal cords\u003c\/li\u003e\n  \u003cli\u003eStable tracking reduces flap and vibration\u003c\/li\u003e\n  \u003cli\u003eResists debris and moisture for longer life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and installation notes?\u003c\/h3\u003e\n\u003cp\u003eThe replacement measures 119 inches in total length and 5\/8 inch in width, matching factory deck belt specifications. During installation, route the belt exactly as shown in your mower’s deck diagram, inspect pulleys and idlers for wear, and replace any damaged components to prevent premature belt failure. Tension and alignment are essential: too tight causes bearing strain, too loose causes slip.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 119\" (measured circumference)\u003c\/li\u003e\n  \u003cli\u003eWidth: 5\/8\" for proper pulley engagement\u003c\/li\u003e\n  \u003cli\u003eCheck pulleys, idlers, and spindle bearings during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will replacing the belt benefit mower performance?\u003c\/h3\u003e\n\u003cp\u003eInstalling a correct-fit covered belt restores reliable deck drive, helping maintain blade tip speed and even cutting quality. A fresh belt reduces slipping and heat buildup, preventing uneven wear on pulleys and prolonging component life. Regular replacement on schedule keeps your mower cutting efficiently and reduces downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves blade speed consistency and cut quality\u003c\/li\u003e\n  \u003cli\u003eReduces slipping, heat, and premature pulley wear\u003c\/li\u003e\n  \u003cli\u003eMinimizes unexpected breakdowns and maintenance interruptions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Stens 265-578 replacement belt is intended for owners and technicians of Scag V‑Ride zero‑turn mowers with 48\" decks who need an OEM-equivalent, covered deck belt. If your machine lists Scag part 483966, needs a 119\" x 5\/8\" covered deck belt, and you want a like‑for‑like replacement that preserves original belt routing and performance, this part is a direct option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt replace Scag part 483966?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Stens 265-578 is a direct replacement for Scag 483966 and matches the OEM dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt measures 119 inches in length and 5\/8 inch in width, designed for 48\" deck use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56799535759700,"sku":"B01HHOSVSO","price":74.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-belt-front-packaging_2122bed8-a126-4084-a320-b6a7cc3a9e2a.jpg?v=1786733997"},{"product_id":"stens-replacement-drive-belt-for-john-deere-x300-x540-5-8-x-66-direct-fit-replaces-m154897-m172924","title":"Stens replacement drive belt for John Deere X300–X540 — 5\/8\" x 66½\" direct-fit (replaces M154897\/M172924)","description":"\u003cp\u003e\u003cstrong\u003eStens OEM Replacement Belt 265-665 is a direct-fit drive belt engineered to replace John Deere M154897 and M172924 for X300–X540 series mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your mower’s drive or deck belt shows wear, choosing an exact-fit replacement keeps cutting performance and belt routing consistent. This Stens belt matches the original equipment specifications — 5\/8\" width and 66 1\/2\" length — so you can expect the same pulley alignment and tensioning as the factory part without the wait or price of dealer-only supply.\u003c\/p\u003e\n\n\u003ch3\u003eWill this belt fit my John Deere X300, X400, or X500 series?\u003c\/h3\u003e\n\u003cp\u003eYes — the belt is specified to replace John Deere OEM part numbers M154897 and M172924 and is designed for common models in the X300–X540 ranges. Always confirm your mower’s parts diagram or existing belt number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM numbers: John Deere M154897 and M172924\u003c\/li\u003e\n  \u003cli\u003eCompatible series: X300, X400, X500 up to X540 models\u003c\/li\u003e\n  \u003cli\u003eCheck: compare the printed number on your current belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the dimensions and construction affect performance?\u003c\/h3\u003e\n\u003cp\u003eThe belt’s 5\/8\" width and 66 1\/2\" circumference match the original geometry so pulleys, idlers, and tensioners operate as intended. Proper dimensions minimize slippage, reduce wear on bearings, and preserve cutting deck alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWidth: 5\/8\" for correct groove engagement\u003c\/li\u003e\n  \u003cli\u003eLength: 66 1\/2\" to maintain factory tension\u003c\/li\u003e\n  \u003cli\u003eConstruction: durable material engineered for mower loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and routine maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same routing as the OEM belt; neither special tools nor modifications are required if your model originally used M154897\/M172924. Regular inspection for cracking, glazing, or frayed edges will extend service life and prevent unexpected failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall: follow your mower’s belt routing diagram\u003c\/li\u003e\n  \u003cli\u003eTools: common hand tools for removing covers and tensioners\u003c\/li\u003e\n  \u003cli\u003eMaintenance: inspect before each mowing season and replace if damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does choosing an OEM-compatible aftermarket belt help my mower long term?\u003c\/h3\u003e\n\u003cp\u003eUsing a compatible replacement that matches OEM specs helps preserve original handling, belt path, and part interactions. That consistency reduces strain on pulleys and spindles and keeps your deck tracking as designed, lowering the risk of secondary damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePreserves factory pulley alignment and tension\u003c\/li\u003e\n  \u003cli\u003eReduces wear on idlers and spindles\u003c\/li\u003e\n  \u003cli\u003eCost-effective alternative to dealer-only parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Stens 265-665 replacement belt is aimed at homeowners, landscapers, and small-property maintenance pros who operate John Deere X300–X540 series tractors and need a reliable, direct-fit belt that mirrors OEM M154897\/M172924 specifications. It’s suitable for do-it-yourselfers comfortable with basic mower maintenance and technicians replacing deck or drive belts during routine service.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNote:\u003c\/em\u003e Always verify your exact mower model and the original belt part number printed on your existing belt before purchase to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt replace John Deere part M154897?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Stens 265-665 replaces John Deere M154897 and M172924 and fits many X300–X540 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt is 5\/8\" wide and 66 1\/2\" long; match these to your current belt before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56799735513428,"sku":"B01HHOTO08","price":55.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-front-packaging-view.jpg?v=1786736811"},{"product_id":"stens-power-rotary-scissors-replacement-cutting-head-idech-ask-mw23-compatible-quick-stop-blade-multi-adapter-fit","title":"Stens Power Rotary Scissors replacement cutting head, Idech ASK-MW23 compatible — quick-stop blade \u0026 multi-adapter fit","description":"\u003cb\u003eStens 385-581 Power Rotary Scissors is a replacement rotary cutting head built for straight-shaft trimmers and edgers, offering quick-stop blade rotation, a ground-resting bottom disk to prevent scalping, and multiple adapters for broad fitment.\u003c\/b\u003e\n\n\u003cp\u003eThis aftermarket cutting head is designed as a versatile substitute for the Idech ASK-MW23, made to attach to straight-shaft trimmers with a solid drive shaft and to work vertically as an edger. It ships in OEM-style packaging and includes the standard 18\/15 tooth blade set, plus a suite of adapters so the unit fits many common shaft sizes. The unit incorporates safety-oriented design elements — a patent-pending guard to reduce kickback and reduce thrown debris — and a bottom disk engineered to ride the ground and minimize turf scalping while cutting.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Stens 385-581 improve safety during trimming?\u003c\/h3\u003e\n\u003cp\u003eThe cutter uses a patent-pending design that reduces kickback and limits debris ejection, plus a quick-stop mechanism that halts blade rotation when the throttle is released. These features cut risk when operating near fences, landscaping, or shallow water. The bottom disk provides a stable contact point with the ground to keep blades from digging into turf.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePatent-pending guard lowers chance of kickback and thrown debris\u003c\/li\u003e\n  \u003cli\u003eQuick-stop blade action stops rotation rapidly after throttle release\u003c\/li\u003e\n  \u003cli\u003eBottom disk rests on ground to prevent scalping and protect turf\u003c\/li\u003e\n  \u003cli\u003eSuitable for use near sand or in shallow water thanks to enclosed design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich trimmers and engines will this head fit?\u003c\/h3\u003e\n\u003cp\u003eThis cutting head fits straight-shaft trimmers that use a solid drive shaft and can function vertically as an edger. It comes with multiple adapters to fit a range of common shaft diameters and drive configurations. For reliable power and performance, use it with engines 25cc or larger.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with straight-shaft trimmers and verticle edging setups\u003c\/li\u003e\n  \u003cli\u003eIncludes adapters: 6mm-10t, 7mm-13t, 7mm-7t, 8mm-9t, and 5.2mm-square\u003c\/li\u003e\n  \u003cli\u003eRecommended for engines 25cc and up to ensure adequate power\u003c\/li\u003e\n  \u003cli\u003eReplacement for Idech ASK-MW23 (verify fit before ordering)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat blade options and maintenance should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe package includes a standard 18\/15 tooth blade set and allows upgrading to alternate tooth counts for different cutting jobs. Replacement blades are available in several tooth configurations so you can match cutting performance to vegetation type. Periodic inspection, blade sharpening, or replacement will sustain cutting quality and safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShips with standard 18\/15-tooth blade set for general use\u003c\/li\u003e\n  \u003cli\u003eOptional replacement sets: 21\/18-tooth and 28\/24-tooth for heavier cutting\u003c\/li\u003e\n  \u003cli\u003eBlades are replaceable to maintain cutting efficiency and safety\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer fit verification and regular maintenance guidelines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eStens supplies the cutting head in OEM-style packaging and includes the adapters needed to fit many common trimmer shafts, simplifying installation on compatible machines. The unit is designed to meet or exceed OEM specifications and is backed by a one-year Stens warranty for added confidence.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes the cutting head, standard 18\/15 tooth blades, and multiple adapters\u003c\/li\u003e\n  \u003cli\u003eAdapters fit a range of shaft sizes for wide compatibility\u003c\/li\u003e\n  \u003cli\u003eOEM-style packaging and a one-year Stens warranty included\u003c\/li\u003e\n  \u003cli\u003eAlways verify OEM part numbers and fit before purchasing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Stens 385-581 is aimed at homeowners, landscapers, and equipment rental operations that need a robust, multi-fit rotary cutting head compatible with straight-shaft trimmers and vertical edging. It suits those who prioritize safety features, quick blade stop, and the flexibility to swap blade styles for light trimming through heavier brush—all while using 25cc or larger engines. Verify your trimmer shaft and OEM part reference before ordering to ensure proper fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Stens 385-581 fit my trimmer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits straight-shaft trimmers with a solid drive shaft; verify shaft size and OEM references before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this near sand or shallow water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the design minimizes thrown debris and is safer for use around sand or shallow water.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56800539803988,"sku":"B07ZPBDR2T","price":274.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-385-581-front-view.jpg?v=1786737943"},{"product_id":"stens-flat-idler-pulley-for-scag-walk-behind-mowers-3-8-bore-3-25-od-heavy-duty","title":"Stens Flat Idler Pulley for Scag Walk-Behind Mowers — 3\/8\" Bore, 3.25\" OD, Heavy-Duty","description":"\u003cp\u003e\u003cstrong\u003eStens Flat Idler 280-416 is a heavy-duty metal replacement pulley designed to fit Scag commercial gear-drive walk-behind mowers and Tiger Cub drive assemblies (serial 7630000+).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis precision-made flat idler restores belt alignment and tension on a range of Scag deck and Tiger Cub drive applications. Built by an OEM supplier and sold under the Stens part number 280-416, the part matches the critical dimensions needed for reliable operation: 3\/8\" bore (ID), 3 1\/4\" outside diameter (OD), and a 1\" height. Because mower model fitment can vary by serial number and deck size, confirm compatibility with the serial range and OEM numbers before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Scag machines will this idler fit?\u003c\/h3\u003e\n\u003cp\u003eThis idler replaces several Scag OEM numbers and fits specific deck and drive configurations. It is intended for Scag 32\", 36\", 48\", 52\" and 61\" gear-drive commercial walk-behind mowers, plus 48\", 52\" and 61\" Tiger Cub drive components when the machine serial number is 7630000 or higher. Cross-referenced OEM numbers include Encore 363169 and Scag 481048, 48201, 483208.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible deck sizes: 32\" \/ 36\" \/ 48\" \/ 52\" \/ 61\"\u003c\/li\u003e\n  \u003cli\u003eTiger Cub drive fit: 48\" \/ 52\" \/ 61\" with serial 7630000+\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM: Encore 363169; Scag 481048, 48201, 483208\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact measurements and materials of this idler?\u003c\/h3\u003e\n\u003cp\u003eThe Stens flat idler is made from durable metal and manufactured to the key dimensions needed for a secure, low-play fit. The outer diameter is 3 1\/4\", the inner diameter (bore) is 3\/8\", and the overall height (thickness) is 1\". Additional dimension callouts available on the product drawing help confirm fitment against your original part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOuter diameter (A): 3 1\/4\"\u003c\/li\u003e\n  \u003cli\u003eInner diameter (ID): 3\/8\"\u003c\/li\u003e\n  \u003cli\u003eHeight (V): 1\" with other measured offsets as A–H listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this idler improve belt performance and serviceability?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or damaged idler restores correct belt routing and tension, which reduces slipping and uneven wear. This Stens idler is heavy-duty and designed for commercial use, helping maintain consistent drive engagement and prolong belt life when installed correctly. Always inspect mounting hardware and bushings during replacement to ensure proper operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores belt alignment and stable tension\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty metal construction for commercial duty cycles\u003c\/li\u003e\n  \u003cli\u003eDirect OEM cross-reference minimizes fitment surprises\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I verify fit before ordering?\u003c\/h3\u003e\n\u003cp\u003eMeasure your existing idler and compare to the provided dimensions (ID 3\/8\", OD 3 1\/4\", height 1\"), and check your mower serial number against the listed range. Review the OEM replacement numbers and the product drawing for lettered dimensions A through H to confirm match. When in doubt, compare photos or consult your mower’s parts diagram.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare ID, OD and height to your original part\u003c\/li\u003e\n  \u003cli\u003eConfirm machine serial number (7630000 or higher for Tiger Cub fits)\u003c\/li\u003e\n  \u003cli\u003eCross-check OEM numbers: 363169, 481048, 48201, 483208\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This replacement flat idler is aimed at professional landscapers, commercial mower technicians, and serious homeowners who maintain Scag gear-drive walk-behind mowers or Tiger Cub drive assemblies. If you need an OEM-compatible, heavy-duty pulley to restore belt performance on the specified Scag models and serial ranges, this Stens 280-416 is a direct-fit, cost-effective option. Remember to verify dimensions and OEM references before purchasing to ensure seamless installation.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this idler fit my Scag Tiger Cub?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your Tiger Cub is 48\", 52\" or 61\" and the serial number is 7630000 or higher; verify dimensions to be sure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the idler dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Outer diameter 3 1\/4\", inner diameter 3\/8\", height 1\"; metal construction, OEM cross-reference provided.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56805055463764,"sku":"B001OK8O5I","price":49.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-flat-idler-front-view.jpg?v=1786798379"},{"product_id":"stens-throttle-control-cable-for-scag-sthm20kh-black-39in-inner-wire-direct-fit","title":"Stens Throttle Control Cable for SCAG STHM20Kh — Black, 39in Inner Wire, Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eThe Stens 290-167 throttle control cable is a direct-fit replacement for SCAG 48090, built to restore smooth throttle operation on SCAG STHM20Kh hydrostatic lawn tractors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your hydrostatic lawn tractor's throttle feels loose, sticks, or no longer holds position, the problem can often be a worn or broken control cable. The Stens 290-167 offers the correct inner wire and conduit lengths to match the original SCAG specification so you can return the machine to dependable performance. This replacement is engineered for fit and function rather than cosmetic change, so installation is straightforward for anyone comfortable with routine mower maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cable match the original SCAG part?\u003c\/h3\u003e\n\u003cp\u003eThis Stens cable is manufactured to replace SCAG part number 48090 and matches the critical dimensions used on the STHM20Kh hydrostatic model. That ensures the cable routes, connections, and travel behave like the original factory unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement for SCAG: 48090\u003c\/li\u003e\n  \u003cli\u003eCompatible with SCAG STHM20Kh hydrostatic lawn tractor\u003c\/li\u003e\n  \u003cli\u003eInner wire length: 39 inches for correct throttle travel\u003c\/li\u003e\n  \u003cli\u003eConduit length: 35-3\/4 inches to match original routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability should I expect?\u003c\/h3\u003e\n\u003cp\u003eStens builds replacement control cables to withstand typical outdoor mower conditions—exposure, vibration, and repeated use. While not a cosmetic upgrade, the cable is designed to provide reliable, low-friction operation and long service life when installed properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-friction inner wire for smooth throttle response\u003c\/li\u003e\n  \u003cli\u003eProtective conduit to resist abrasion and contamination\u003c\/li\u003e\n  \u003cli\u003eDurable end fittings sized for direct compatibility\u003c\/li\u003e\n  \u003cli\u003eBlack finish that resists visible wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstalling the Stens 290-167 is typically a straightforward repair that an owner with basic mechanical skills can complete. The job usually involves removing the old cable from the throttle linkage and routing the new conduit along the original path before securing the end fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic hand tools: pliers, wrenches, screwdrivers\u003c\/li\u003e\n  \u003cli\u003eNo specialized tools required for most installs\u003c\/li\u003e\n  \u003cli\u003eCheck routing against factory cable path to avoid binding\u003c\/li\u003e\n  \u003cli\u003eMinor adjustments may be required to set idle and full-throttle stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this cable fit my machine and how do I confirm compatibility?\u003c\/h3\u003e\n\u003cp\u003eUse the SCAG reference and model number to confirm compatibility: this Stens cable replaces SCAG 48090 and is specified for STHM20Kh hydrostatic tractors. If your original cable matches those dimensions or part numbers, this replacement is the correct choice.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm original part number: SCAG 48090\u003c\/li\u003e\n  \u003cli\u003eVerify your mower model: SCAG STHM20Kh\u003c\/li\u003e\n  \u003cli\u003eCompare inner wire (39\") and conduit length (35-3\/4\")\u003c\/li\u003e\n  \u003cli\u003eInspect end fittings for matching connection style\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Stens 290-167 is aimed at homeowners, lawn care professionals, and repair shops needing a reliable, OEM-dimension replacement throttle cable for SCAG STHM20Kh hydrostatic lawn tractors. If you’re restoring throttle control, want accurate fitment to the original SCAG 48090 specification, and prefer a cable built for routine outdoor use, this part provides the required lengths and fittings for a correct repair.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this cable replace SCAG part 48090?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Stens 290-167 is a direct replacement for SCAG 48090 and fits SCAG STHM20Kh hydrostatic tractors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the cable and conduit lengths?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The inner wire measures 39 inches and the outer conduit is 35-3\/4 inches, matching the original specifications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56805061525844,"sku":"B001OK9ZOC","price":56.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-throttle-control-cable-front-view.jpg?v=1786798438"},{"product_id":"stens-replacement-drive-belt-118-1-4-x-1-2-for-mtd-cub-cadet-42-decks-covered-construction-oem-fit","title":"Stens replacement drive belt 118-1\/4\" x 1\/2\" for MTD \u0026 Cub Cadet 42\" decks — covered construction, OEM fit","description":"\u003cp\u003e\u003cstrong\u003eStens 265-246 is a 118-1\/4\" x 1\/2\" covered drive belt engineered to replace MTD and Cub Cadet OEM part numbers for 42\" and select 46\" decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your riding mower’s drive belt is frayed, slipping, or stretched, swapping in a compatible OEM replacement restores dependable power transfer between engine components and the transmission. This Stens 265-246 belt matches the original MTD and Cub Cadet dimensions and construction so it fits and performs like the factory part.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines does this belt fit?\u003c\/h3\u003e\n\u003cp\u003eThis belt replaces several OEM numbers and fits common residential deck and Autodrive applications from MTD and Cub Cadet. Confirm your equipment model and deck size before ordering to ensure correct compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces MTD 954-04033, 754-04033, 954-04033A, 754-04033A\u003c\/li\u003e\n  \u003cli\u003eReplaces Cub Cadet 754-04033, 954-04033, 954-04033A, 754-04033A\u003c\/li\u003e\n  \u003cli\u003eCompatible with Cub Cadet RZT-L42 and RZT-242 (42\" deck)\u003c\/li\u003e\n  \u003cli\u003eFits MTD Autodrive step-thru frames with 46\" deck\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the belt’s dimensions and construction?\u003c\/h3\u003e\n\u003cp\u003eThis is a covered drive belt sized to the OEM specification so it routes exactly like the original. Its covered construction protects internal cords from debris and extends service life when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall length: 118-1\/4\" (measured circumference)\u003c\/li\u003e\n  \u003cli\u003eWidth: 1\/2\" — matches original drive routing and pulleys\u003c\/li\u003e\n  \u003cli\u003eCovered belt type for added abrasion and contaminant resistance\u003c\/li\u003e\n  \u003cli\u003eDesigned for drive application (not for blade or deck spindle use)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will installing this belt affect mower performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn belt restores smooth power transfer, reduces slipping, and helps maintain consistent ground speed under load. Proper tension and correct routing are necessary for best results and to avoid premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces clutching or slipping under load when in good condition\u003c\/li\u003e\n  \u003cli\u003eImproves responsiveness and consistent drive engagement\u003c\/li\u003e\n  \u003cli\u003eHelps prevent heat and friction damage with correct tensioning\u003c\/li\u003e\n  \u003cli\u003eOEM-equivalent sizing minimizes installation issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners and maintenance technicians who need a reliable, OEM-equivalent drive belt for MTD and Cub Cadet riding mowers with 42\" decks or compatible Autodrive frames. Choose this Stens 265-246 belt when you want a direct replacement that matches factory length, width, and covered construction for dependable drive performance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey features at a glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement for multiple MTD and Cub Cadet part numbers.\u003c\/li\u003e\n  \u003cli\u003eMeasured length of 118-1\/4\" and 1\/2\" width for correct routing.\u003c\/li\u003e\n  \u003cli\u003eCovered construction for abrasion resistance and extended service life.\u003c\/li\u003e\n  \u003cli\u003eIntended for drive applications on specified models—verify fit before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt fit Cub Cadet RZT-L42?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Stens 265-246 fits the Cub Cadet RZT-L42 with a 42\" deck when replacing the OEM numbers listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt measures 118-1\/4\" in length and 1\/2\" in width and is a covered drive belt.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56805066047828,"sku":"B001OKBGRG","price":54.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-265-246-front-packaging.jpg?v=1786798565"},{"product_id":"stens-30-inch-mulching-blade-for-murray-mowers-13-16-center-hole-149-steel-oem-fit","title":"Stens 30-inch Mulching Blade for Murray Mowers — 13\/16\" Center Hole, .149\" Steel OEM-Fit","description":"\u003cp\u003e\u003cstrong\u003eStens 335-819 is a 30-inch mulching replacement blade engineered to fit Murray 30\" mower decks (1987 and newer) with a 13\/16\" center hole, delivering OEM-fit durability for effective mulching.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Murray lawn mower needs a direct-fit mulching blade, the Stens 335-819 (also sold as Stens 335819) offers the same dimensions and mounting pattern as common Murray OEM parts. This blade is built to match length, width and thickness specifications so it installs easily and restores cutting performance without extensive modification. It comes in Stens branded packaging to help you identify a genuine replacement part.\u003c\/p\u003e\n\n\u003ch3\u003eWill this blade fit my Murray mower deck?\u003c\/h3\u003e\n\u003cp\u003eCheck three key measurements to confirm fit: blade length, center hole diameter, and deck compatibility year. The Stens 335-819 is made for 30\" Murray decks and works with models from 1987 onward when the center hole is 13\/16\".\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlade length: 30 inches — matches 30\" decks\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 13\/16\" — mounting bolt size compatibility\u003c\/li\u003e\n  \u003cli\u003eWidth: 2 3\/4\" and thickness: 0.149\" — ensures correct clearance and strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this blade replace Murray OEM part numbers?\u003c\/h3\u003e\n\u003cp\u003eStens 335-819 replaces a long list of Murray OEM identifiers so you can swap it for older or discontinued SKU references. If your mower currently lists any of the Murray numbers included in the compatibility list, this Stens blade is intended as the direct replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommonly replaces Murray OEMs like 056217E701, 456217, 56217 and related MA variants\u003c\/li\u003e\n  \u003cli\u003eUseful when original parts are obsolete or harder to source\u003c\/li\u003e\n  \u003cli\u003eSold with Stens branded label to verify authenticity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits should I expect from a mulching blade?\u003c\/h3\u003e\n\u003cp\u003eMulching blades are shaped to repeatedly cut clippings into fine pieces that settle between grass blades rather than forming clumps. The Stens mulching design helps disperse finely chopped grass back into the lawn, which can aid in even decomposition and make bagging unnecessary in many conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to recirculate clippings for finer, consistent mulch\u003c\/li\u003e\n  \u003cli\u003eMaintains lawn appearance by reducing clumping\u003c\/li\u003e\n  \u003cli\u003eDurable steel thickness (.149\") for longer edge life under normal use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I verify and install this blade safely?\u003c\/h3\u003e\n\u003cp\u003eAlways confirm part compatibility before purchase and follow safe installation practices. Turn the mower off, disconnect the spark plug, and use the correct mounting hardware and torque specs from your mower manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm 30\" deck and 13\/16\" center hole before ordering\u003c\/li\u003e\n  \u003cli\u003eUse proper tools, wear gloves, and secure mower against movement\u003c\/li\u003e\n  \u003cli\u003eReplace blades in matched sets when applicable for balance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Stens 335-819 mulching blade is aimed at homeowners, independent repair shops, and lawn-care professionals who need a reliable, direct-fit replacement for Murray 30\" decks (1987 and newer). It suits anyone replacing original Murray blades listed among the OEM numbers provided, or those upgrading to a true mulching blade to reduce grass clumping and return finer clippings to the lawn. If you value straightforward specifications and an OEM-compatible form factor, this blade is a practical replacement option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this blade fit all Murray 30\" mowers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Murray 30\" decks from 1987 and newer with a 13\/16\" center hole; verify your deck and hole size first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Murray OEM numbers does this replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It replaces many Murray numbers including 056217E701, 456217, 56217 and several MA variants.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56805118476628,"sku":"B01H5K1YP2","price":70.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-335-819-front-view.jpg?v=1786799960"},{"product_id":"stens-replacement-drive-belt-for-toro-timecutter-ss5000-ss5060-50in-deck-1-2-x-141-5-oem-fit","title":"Stens Replacement Drive Belt for Toro TimeCutter SS5000\/SS5060 50in Deck — 1\/2 x 141.5 OEM-fit","description":"\u003cp\u003e\u003cstrong\u003eStens 265-467 is a direct-fit replacement drive belt engineered to restore reliable power transfer for Toro TimeCutter SS5000 and SS5060 mowers with a 50\" deck (OEM ref 119-8820).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your TimeCutter is slipping, squealing, or failing to engage the deck properly, the right belt makes all the difference. This Stens OEM replacement matches the factory dimensions—1\/2\" width and 141 1\/2\" length—so it installs cleanly without modification and brings deck drive performance back to specification. It’s designed for owners and technicians who want a durable, correct-fit part that keeps mowing efficient and helps avoid downtime.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this belt affect my mower’s cutting performance?\u003c\/h3\u003e\n\u003cp\u003eUsing a belt that matches Toro’s original size keeps blade speed consistent and maintains the deck engagement characteristics set by the manufacturer. A properly sized belt reduces slipping under load and helps blades respond predictably when you change ground conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct blade RPM by matching factory dimensions\u003c\/li\u003e\n  \u003cli\u003eReduces slipping and noise during heavy grass or slope cutting\u003c\/li\u003e\n  \u003cli\u003eHelps maintain even mower deck engagement across all pulleys\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this Stens belt an exact replacement for Toro part 119-8820?\u003c\/h3\u003e\n\u003cp\u003eYes—this Stens belt is manufactured to replace Toro part number 119-8820 and is compatible with TimeCutter SS5000 and SS5060 models using the 50\" deck. The dimensions and profile are produced to OEM tolerances for straightforward swap-in replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for Toro 119-8820\u003c\/li\u003e\n  \u003cli\u003eFits Toro TimeCutter SS5000 and SS5060 with 50\" deck\u003c\/li\u003e\n  \u003cli\u003eDimensions: 1\/2\" width, 141 1\/2\" length\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typical for mowing deck belts and can be completed by a DIYer with basic hand tools and a little mechanical confidence. You’ll need to remove the deck, relieve tensioner spring pressure, route the belt around the pulleys per the mower’s diagram, and then set belt tension before testing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic tools: socket set, screwdrivers, and pliers\u003c\/li\u003e\n  \u003cli\u003eFollow mower’s belt routing diagram to avoid misalignment\u003c\/li\u003e\n  \u003cli\u003eCheck pulleys and tensioner for wear before final assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check to prolong the life of this replacement belt?\u003c\/h3\u003e\n\u003cp\u003eRegular inspection of pulleys, tensioners, and deck alignment prevents premature belt wear. Clean debris from deck areas, replace worn idlers, and ensure correct tension to keep the belt tracking and engaging properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect pulleys and replace damaged or glazed idlers\u003c\/li\u003e\n  \u003cli\u003eKeep deck and belt path free of grass buildup and debris\u003c\/li\u003e\n  \u003cli\u003eVerify correct belt tension after the first hour of use and periodically after\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Stens 265-467 replacement belt is aimed at Toro TimeCutter owners, independent landscapers, and repair shops needing a reliable OEM-spec belt for SS5000 and SS5060 mowers with a 50\" deck. If you require a like-for-like belt that installs without modification and restores deck drive performance to factory expectations, this belt is a practical, cost-effective choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt fit Toro 50\" TimeCutter SS5000?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Stens 265-467 directly replaces Toro 119-8820 for SS5000 and SS5060 50\" decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt is 1\/2\" wide and 141 1\/2\" long, matching the OEM specification.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56805128405332,"sku":"B01HHORIP6","price":57.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-belt-front-packaging_36eaf306-8210-4842-af43-629b1e19f59b.jpg?v=1786800147"},{"product_id":"stens-kenda-super-turf-11x4-00-4-tire-4-ply-tubeless-turf-friendly-traction","title":"Stens Kenda Super Turf 11x4.00-4 Tire — 4-Ply Tubeless, Turf-Friendly Traction","description":"\u003cstrong\u003eStens 160-401 is a 11x4.00-4 Kenda Super Turf 4-ply tubeless tire built for lawn and garden equipment that balances traction with turf protection.\u003c\/strong\u003e\n\n\u003cp\u003eThis Kenda-designed Super Turf tire fitted under Stens part number 160-401 is engineered for small tractors, lawn tractors, garden carts, and other outdoor power equipment. It combines a broader contact surface and reinforced 4-ply construction to resist punctures and extend tread life, while a turf-friendly pattern reduces damage to grass. The tire mounts to a 4\" rim and carries a 30 psi maximum, supporting typical light-duty to medium-duty landscape applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tire protect turf while providing traction?\u003c\/h3\u003e\n\u003cp\u003eThe Super Turf tread pattern is arranged to spread weight across a larger rubber area, limiting ground pressure and the tendency to dig into grass. Simultaneously, the tread geometry delivers directional grip for starting, stopping, and light turns without tearing sod.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWide contact patch reduces soil compaction and turf scuffing\u003c\/li\u003e\n  \u003cli\u003eDirectional lugs provide controlled traction on wet and dry grass\u003c\/li\u003e\n  \u003cli\u003eProfile designed to roll smoothly to minimize turf marking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this tire fit my mower and how strong is it?\u003c\/h3\u003e\n\u003cp\u003eThis tire is sized 11x4.00-4 for a 4\" rim and is tubeless, simplifying installation on compatible wheels. Its 4-ply construction increases sidewall stiffness and puncture resistance compared with lower-ply consumer tires, and it’s rated for a maximum load of 330 pounds at up to 30 psi.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits wheels with 4\" rim diameter\u003c\/li\u003e\n  \u003cli\u003e4-ply casing improves durability and load handling\u003c\/li\u003e\n  \u003cli\u003eMax load 330 lb, max inflation 30 psi for typical garden use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replace OEM tires and match standards?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 160-401 is offered as a direct replacement for common OEM Kenda references, making it simple to swap into existing equipment without modifying assemblies. It meets industry needs for outdoor power equipment where a balance of turf care and traction is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKnown OEM cross-references include Kenda105000452B1, 206A1083, and K500\u003c\/li\u003e\n  \u003cli\u003eTubeless design compatible with standard rim seating and valves\u003c\/li\u003e\n  \u003cli\u003eEngineered specifically for lawn and garden equipment applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and usage tips help this tire last?\u003c\/h3\u003e\n\u003cp\u003eMaintaining proper inflation and avoiding sharp debris are the easiest ways to extend tire life. Periodic checks for cuts, punctures, and even wear across the tread ensure safe operation and preserve turf performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKeep pressure at or below 30 psi and monitor regularly\u003c\/li\u003e\n  \u003cli\u003eInspect for embedded objects and sidewall damage before use\u003c\/li\u003e\n  \u003cli\u003eRotate or replace in pairs to maintain balanced handling on tractors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Landscapers, homeowners with lawn tractors, and small-scale groundskeepers who need a durable, turf-safe tire will find the Stens 160-401 (Kenda Super Turf) a practical option. It’s suited to those replacing worn OEM tires or upgrading to a 4-ply tubeless design that emphasizes puncture resistance and longer tread life while preserving lawn appearance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures at a glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize: 11x4.00-4 — Rim: 4\" — Type: Tubeless\u003c\/li\u003e\n  \u003cli\u003ePly rating: 4; Max load: 330 lb; Max pressure: 30 psi\u003c\/li\u003e\n  \u003cli\u003eSuper Turf tread for traction with reduced turf damage\u003c\/li\u003e\n  \u003cli\u003eOEM cross-references: Kenda105000452B1, 206A1083, K500\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eChoosing the right turf tire helps protect your lawn and improve equipment performance. The Stens 160-401 Kenda Super Turf is designed to deliver that balance for common garden and lawn care machines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this tire tubeless or requires an inner tube?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This Stens 160-401 Kenda Super Turf tire is tubeless and mounts on a compatible 4\" rim without an inner tube.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the max load and inflation specs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Rated for a maximum load of 330 pounds and a maximum inflation pressure of 30 psi.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56805164024148,"sku":"B004HSA9QQ","price":74.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-kenda-11x4-front-view.jpg?v=1786800579"},{"product_id":"stens-replacement-deck-timing-belt-for-toro-120-3335-44-x-3-4-oem-fit-made-in-usa","title":"Stens replacement deck timing belt for Toro 120-3335 — 44\" x 3\/4\" OEM-fit, Made in USA","description":"\u003cp\u003e\u003cstrong\u003eStens 265-610 is an OEM-quality 44\" x 3\/4\" timing deck belt engineered to replace Toro 120-3335 in TimeMaster 30\" mowing decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn or broken deck belt stops your Toro TimeMaster, the correct replacement restores cutting performance and safe power transfer. This Stens-branded timing belt matches OEM dimensions and tooth profile so it slips into the deck without modification. Packaged in a branded sleeve and made in the U.S.A., the belt is ready to install with no extra assembly required.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this belt fits my mower?\u003c\/h3\u003e\n\n\u003cp\u003eMeasure the original belt or check your mower manual to confirm the OEM number 120-3335 or a timing belt length of 44\" and width of 3\/4\". Stens 265-610 is specifically listed to replace Toro 120-3335 and is suited to the Toro TimeMaster with a 30\" deck.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLength: 44 inches — matches OEM specification\u003c\/li\u003e\n  \u003cli\u003eWidth: 3\/4 inch — correct belt cross-section\u003c\/li\u003e\n  \u003cli\u003eBelt type: timing belt — designed for deck pulley engagement\u003c\/li\u003e\n  \u003cli\u003eDirect replacements: Toro 120-3335 and equivalent Exmark reference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and manufacturing standards does this belt use?\u003c\/h3\u003e\n\n\u003cp\u003eThe Stens replacement is manufactured to meet OEM tolerances, using durable rubber compounds and reinforced internal cords for consistent tooth engagement and long life. U.S. production helps maintain strict quality control and dimensional accuracy compared with many generic belts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReinforced construction for resistance to stretching\u003c\/li\u003e\n  \u003cli\u003ePrecision tooth profile for reliable pulley grip\u003c\/li\u003e\n  \u003cli\u003eMade in the U.S.A. with OEM-fit dimensions\u003c\/li\u003e\n  \u003cli\u003eBranded sleeve packaging to protect the belt in storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is this belt to install and maintain?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone familiar with deck belt replacement: remove the deck, route the timing belt around pulleys following the mower’s routing diagram, and re-tension according to specifications. No special assembly tools or parts are included or required — just basic mechanical tools and attention to routing and tension.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNo assembly required — ready out of the sleeve\u003c\/li\u003e\n  \u003cli\u003eDirect drop-in replacement reduces installation time\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and idlers for wear before installing\u003c\/li\u003e\n  \u003cli\u003eFollow mower manual for correct tensioning and routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I replace my deck timing belt?\u003c\/h3\u003e\n\n\u003cp\u003eReplace the belt if you see cracked or frayed edges, missing teeth, slipping under load, or visible glazing on the tooth surface. Preventive replacement during seasonal service avoids unexpected failures and keeps mower performance consistent.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplace at first signs of cracking, glazing, or tooth damage\u003c\/li\u003e\n  \u003cli\u003eConsider replacement during annual deck service\u003c\/li\u003e\n  \u003cli\u003eCheck belt if mowing under heavy or abrasive conditions\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and bearings whenever you replace the belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners and professional landscapers who own a Toro TimeMaster with a 30\" deck and need a reliable OEM-fit deck timing belt. Choose the Stens 265-610 when you want a U.S.-made, direct-replacement belt that mirrors the original Toro 120-3335 dimensions and tooth profile for fast, dependable repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt replace Toro part 120-3335?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Stens 265-610 is a direct replacement for Toro 120-3335 and fits TimeMaster 30\" decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt measures 44 inches long and 3\/4 inch wide, standard timing belt specification.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56805172445524,"sku":"B00FEYRD9I","price":57.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-265-610-front-packaging.jpg?v=1786800735"},{"product_id":"stens-drive-wheel-for-21-inch-self-propelled-lawn-mowers-43-tooth-replacement-silver-8x2-25-1-2-inch-bore","title":"Stens Drive Wheel for 21-inch Self-Propelled Lawn Mowers, 43-Tooth Replacement — Silver, 8x2.25, 1\/2-inch Bore","description":"\u003cp\u003e\u003cstrong\u003eStens Drive Wheel 205-670 is a direct-fit plastic replacement drive wheel for 21\" self-propelled Lawn-Boy and Toro mowers that restores drive engagement with its 43-tooth radial tread design.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your self-propelled mower is slipping, losing traction, or the drive system feels worn, replacing the drive wheel with a compatible part can bring reliable performance back without buying a new machine. This Stens wheel is manufactured to match the fit and function of OEM part 92-1042 and is compatible with Lawn-Boy M, Silver, Silver Pro, Gold Pro series and selected Toro models (20710, 20711, 20716). It’s a practical, cost-effective repair for common drive issues on 21\" self-propelled walk-behind mowers.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this drive wheel improve my mower's performance?\u003c\/h3\u003e\n\u003cp\u003eSwapping in a fresh drive wheel removes worn teeth and a compacted tread that cause slipping and inconsistent engagement. The radial tread and correct tooth count help the transmission re-engage smoothly, making self-propelled drive effort predictable and efficient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores proper tooth engagement with 43 teeth matching OEM specifications\u003c\/li\u003e\n  \u003cli\u003eRadial tread improves traction across lawn surfaces\u003c\/li\u003e\n  \u003cli\u003ePrecision bore and hub offset reduce wobble and vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my mower model and how do I confirm compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 205-670 is designed as a compatible replacement for OEM part 92-1042 used on many Lawn-Boy and Toro 21\" self-propelled models. Confirm fit by matching part numbers, wheel dimensions, and hub measurements before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Lawn-Boy and Toro part number 92-1042\u003c\/li\u003e\n  \u003cli\u003eCompatible with Lawn-Boy M, Silver, Silver Pro, Gold Pro series\u003c\/li\u003e\n  \u003cli\u003eFits Toro models 20710, 20711, 20716 and similar self-propelled units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key dimensions and install details I should check?\u003c\/h3\u003e\n\u003cp\u003eThe wheel measures approximately 8 x 2.25 inches with a 1\/2\" bore and a 1 3\/4\" hub offset — critical measurements for proper seating on the drive shaft. A correct bore size and hub offset ensure the wheel aligns with the drive gears and avoids premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWheel size: 8 x 2.25 inches for 21\" mower applications\u003c\/li\u003e\n  \u003cli\u003eBore: 1\/2\" to fit standard drive shafts; Hub offset: 1 3\/4\"\u003c\/li\u003e\n  \u003cli\u003e43 teeth on the drive wheel to match transmission engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the Stens replacement compared to OEM wheels?\u003c\/h3\u003e\n\u003cp\u003eStens manufactures aftermarket components to meet replacement needs with materials and dimensions tuned to the original specification. While long-term durability depends on use and maintenance, this wheel’s plastic compound and tread pattern deliver dependable service for typical lawn-care conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable plastic construction suited for general mowing conditions\u003c\/li\u003e\n  \u003cli\u003eRadial tread resists wear while maintaining traction\u003c\/li\u003e\n  \u003cli\u003eMatches critical OEM dimensions to prevent drive system strain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Stens Drive Wheel 205-670 is aimed at homeowners and small-property caretakers who want an economical, reliable repair for a slipping or non-engaging self-propelled drive on 21\" Lawn-Boy and compatible Toro mowers. It's ideal for DIYers comfortable performing basic mower maintenance, small engine repair shops stocking replacement parts, and anyone looking to extend the life of a well-maintained walk-behind mower without replacing the entire unit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this wheel replace Lawn-Boy 92-1042?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Stens 205-670 is a compatible replacement for Lawn-Boy and Toro part number 92-1042.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What bore size and hub offset does it use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The wheel has a 1\/2\" bore and a 1 3\/4\" hub offset, sized for 21\" self-propelled mowers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56805293097300,"sku":"B008KYT8SS","price":75.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-drive-wheel-front-view.jpg?v=1786801369"},{"product_id":"stens-30-inch-hi-lift-mower-blade-replacement-for-snapper-rear-engine-riders-30in-0-187in-thick","title":"Stens 30-inch Hi-Lift Mower Blade Replacement for Snapper Rear-Engine Riders — 30in, 0.187in Thick","description":"\u003cp\u003e\u003cstrong\u003eStens 335-307 is a 30-inch hi-lift replacement blade engineered to fit Snapper 30\" rear-engine riders that use OEM numbers 1-8069, 7018069, 7018069BMA, 7018069BZ, and 7018069BZYP.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis high-lift blade from Stens is a direct-fit aftermarket replacement designed for Snapper rear-engine rider decks that require a 30\" cutting tool. It duplicates the key dimensions—30\" length, 2 3\/4\" width, 0.187\" thickness, a 1 1\/16\" center hole and a 9\/16\" outer hole—so installation is straightforward when the part matches your machine. The blade arrives with Stens branded labeling and is sold through common retail channels.\u003c\/p\u003e\n\n\u003ch3\u003eWill this blade physically fit my Snapper rear-engine rider?\u003c\/h3\u003e\n\u003cp\u003eCheck the mower deck measurements and the OEM replacement number to confirm compatibility. The Stens 335-307 mirrors the original blade dimensions and hole pattern used on the listed Snapper models; if your mower uses one of the listed OEM numbers, it should be compatible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlade length: 30 inches — matches 30\" decks.\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 1 1\/16 inches; outer hole: 9\/16 inches — matches common Snapper patterns.\u003c\/li\u003e\n  \u003cli\u003eThickness: 0.187 inches and width 2 3\/4 inches — consistent with factory specs.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM: 1-8069, 7018069, 7018069BMA, 7018069BZ, 7018069BZYP.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the hi-lift design affect cutting and bagging?\u003c\/h3\u003e\n\u003cp\u003eHi-lift blades generate stronger airflow under the deck, which helps lift grass for a cleaner cut and improves material movement into the bagging system. This blade’s profile is intended to enhance discharge and collection on compatible rear-engine riders without altering deck geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigher suction lifts grass for an even cut.\u003c\/li\u003e\n  \u003cli\u003eImproved clippings ejection supports bagging or side-discharge options.\u003c\/li\u003e\n  \u003cli\u003eMaintains deck balance when installed correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and dimensions should I expect from this replacement?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 335-307 is built to match the physical specifications of the OEM part so it functions like the original blade. Its stamped steel construction and measured thickness provide a blend of strength and flexibility appropriate for residential mower use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: stamped steel with a protective finish.\u003c\/li\u003e\n  \u003cli\u003eDimensions: 30\" long, 2 3\/4\" wide, 0.187\" thick.\u003c\/li\u003e\n  \u003cli\u003eHole sizes: 1 1\/16\" center, 9\/16\" outer hole for secure mounting.\u003c\/li\u003e\n  \u003cli\u003ePackaging: Stens branded label for easy identification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the Stens 335-307 blade?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard mower blade replacement steps: disconnect spark, raise and secure the mower, remove the old blade, orient the new blade with cutting edge and holes aligned, and torque the mounting bolt to manufacturer spec. Keep the blade sharp and balanced; replace if bent or excessively worn.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafety first: disconnect spark and stabilize the mower before work.\u003c\/li\u003e\n  \u003cli\u003eAlign center and outer hole pattern for correct fitment.\u003c\/li\u003e\n  \u003cli\u003eBalance and sharpen regularly for best performance.\u003c\/li\u003e\n  \u003cli\u003eReplace if damaged or if balance cannot be restored.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this blade is for: The Stens 335-307 is aimed at Snapper owners and small-property caretakers who need a reliable, OEM-dimension replacement for 30\" rear-engine rider decks. It suits homeowners looking for an affordable aftermarket option that mirrors original blade geometry and hole pattern, and for technicians servicing multiple Snapper machines who want a consistent, labeled replacement part. Always verify your mower’s model and OEM part number before buying to ensure a proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this Stens blade replace Snapper part 7018069?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Stens 335-307 is listed as a direct replacement for Snapper OEM 1-8069 and 7018069 series parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the exact hole sizes on this blade?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The blade has a 1 1\/16\" center hole and a 9\/16\" outer hole to match the Snapper mounting pattern.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56805299913044,"sku":"B008N3NZ12","price":75.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-335-307-front-packaging.jpg?v=1786801456"},{"product_id":"stens-20-mulching-lawnmower-blade-340-218-replacement-for-20-walk-behind-mowers-black-5-8-arbor-mulching-cut","title":"Stens 20\" Mulching Lawnmower Blade 340-218 Replacement for 20\" Walk-Behind Mowers — Black, 5\/8\" Arbor, Mulching Cut","description":"\u003cp\u003e\u003cstrong\u003eStens 20\" mulching replacement blade (model 340-218) is a direct-fit spare blade engineered to restore cutting performance on many 20\" AYP, Craftsman, Husqvarna and Poulan walk‑behind mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Stens replacement blade is built to match common OEM mounting patterns and dimensions so you can swap it in quickly and get back to mowing. Machined holes, a standard 5\/8\" center arbor, and the 3\/8\" outer mounting hole pattern make it compatible with a wide range of 20\" decks. It’s sold with branded packaging and intended as a mulching-style blade to help finely chop grass clippings while maintaining deck clearance and balance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this blade fit my mower?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 340-218 is made to fit 20\" walk‑behind decks that use a 5\/8\" center arbor and 3\/8\" outer hole. It replaces a variety of OEM part numbers from AYP, Husqvarna, and Poulan so fitment is straightforward when your mower lists those same numbers. Always verify your mower’s OEM number and blade dimensions before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCenter hole: 5\/8\" (standard arbor)\u003c\/li\u003e\n  \u003cli\u003eOuter hole diameter: 3\/8\"\u003c\/li\u003e\n  \u003cli\u003eLength: 20\", Width: 2\", Thickness: 0.134\"\u003c\/li\u003e\n  \u003cli\u003eReplaces OEMs like 204340218, 532114884, 532340218, 752233\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of cut and performance should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis is a mulching blade designed to reduce clump buildup by cutting grass into finer pieces that fall back into the turf. It has the profile and cutting edge geometry typical of mulching blades, balancing a clean cut with airflow that helps retain clippings in the deck for additional chopping. It’s not an adjustable or specialty high-lift blade; it’s optimized for everyday mulching tasks on compatible 20\" mowers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulching geometry for finer clippings\u003c\/li\u003e\n  \u003cli\u003eBalanced thickness (0.134\") for durability and reduced vibration\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain deck clearance and airflow for mulching\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this a direct replacement for my OEM part numbers?\u003c\/h3\u003e\n\u003cp\u003eYes — the Stens 340-218 is manufactured to replace many OEM numbers across AYP, Poulan and Husqvarna product lines. The listing includes the most commonly superseded part numbers, but matching the center and outer hole dimensions and blade length is the simplest way to ensure compatibility. If your mower’s part number appears on the replacement list, this blade is intended to be interchangeable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eListed OEM replacements: 917532752233, 752233, 531307212, 340218\u003c\/li\u003e\n  \u003cli\u003eAlso replaces Poulan\/Husqvarna numbers like 532114884 and 532340218\u003c\/li\u003e\n  \u003cli\u003eFits 20\" walk‑behind models from AYP, Craftsman, Husqvarna, Poulan\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain the blade?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard mower blade replacement steps: disconnect spark plug, tip mower to access blade, remove mounting hardware, fit the replacement blade with correct orientation, and torque to manufacturer spec. Periodically check blade tightness and sharpen or replace when edges are rounded or damage is present to keep cut quality high and prevent undue strain on the mower.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect spark plug before working under the deck\u003c\/li\u003e\n  \u003cli\u003eObserve correct blade orientation for mulching profile\u003c\/li\u003e\n  \u003cli\u003eCheck torque and inspect for wear every few mowing seasons\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: the Stens 340-218 is aimed at homeowners and lawn-care pros who need an affordable, OEM-compatible mulching blade for 20\" walk‑behind mowers from AYP, Craftsman, Husqvarna or Poulan. It’s suitable if you want to restore factory-style cutting performance without changing mower mounting hardware, or if you need a replacement blade that matches common OEM part numbers and standard arbor sizing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this Stens blade fit a 20-inch Craftsman walk-behind?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits most 20\" Craftsman walk‑behind mowers that use a 5\/8\" center arbor and 3\/8\" outer hole pattern.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the blade dimensions and thickness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The blade is 20\" long, 2\" wide, with a 5\/8\" center hole, 3\/8\" outer hole, and 0.134\" thickness.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56805301748052,"sku":"B008N3OER6","price":54.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-340-218-front-packaging.jpg?v=1786801478"},{"product_id":"stens-replacement-mower-spindle-assembly-6-7-8-fits-ariens-gravely-heavy-duty-with-mounting-bolts","title":"Stens replacement mower spindle assembly 6.7\/8\" - fits Ariens \u0026 Gravely, heavy-duty with mounting bolts","description":"\u003cstrong\u003eStens 285-300 is a heavy-duty 6 7\/8\" replacement spindle assembly that restores blade rotation on compatible zero-turn mowers and tow-behind lawn sweepers.\u003c\/strong\u003e\n\n\u003cp\u003eThis spindle assembly is engineered by Stens' OEM supplier to match original equipment dimensions and function. It replaces several Ariens and Gravely part numbers and arrives with the mounting bolts you need for a direct fit. Backed by a one-year warranty, the unit is intended to return worn or damaged cutting decks to reliable operation without extensive fabrication or modification.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this spindle assembly fit my mower deck?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 285-300 is sized at 6 7\/8 inches and built to the same mounting pattern as the listed OEM parts, allowing bolt-on replacement for many Ariens and Gravely decks. Always compare your old spindle's dimensions and bolt-hole spacing with the new part before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for Ariens and Gravely OEM numbers listed in product details.\u003c\/li\u003e\n  \u003cli\u003eIncludes required mounting bolts for most standard installations.\u003c\/li\u003e\n  \u003cli\u003e6 7\/8\" overall dimension to match original assemblies.\u003c\/li\u003e\n  \u003cli\u003eDesigned for zero-turn mowers and compatible tow-behind lawn sweeper machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance improvements can I expect after installing it?\u003c\/h3\u003e\n\u003cp\u003eInstalling a new spindle assembly removes play and worn bearings that cause uneven cutting, vibration, and premature blade wear. With the bearings and housing renewed, blades spin truer and the deck cuts cleaner over repeated passes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduced vibration for a steadier cut and less deck wear.\u003c\/li\u003e\n  \u003cli\u003eImproved blade balance and consistent grass height across the deck.\u003c\/li\u003e\n  \u003cli\u003eOEM-quality materials intended to match original durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable removing a blade and working under the deck. The assembly ships with the mounting bolts needed for most replacements; you'll still need basic hand tools, a torque wrench, and safety supports for the mower.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes spindle assembly plus mounting bolts for proper replacement.\u003c\/li\u003e\n  \u003cli\u003eRequires blade removal and secure jack\/stands for safe access.\u003c\/li\u003e\n  \u003cli\u003eTypical install time: 30–90 minutes depending on experience and mower model.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does Stens provide?\u003c\/h3\u003e\n\u003cp\u003eThis part is covered by a one-year warranty from the date of purchase. If the product arrives defective or fails under normal use within that period, Stens will replace it according to their warranty terms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-year replacement warranty from Stens.\u003c\/li\u003e\n  \u003cli\u003eContact Stens support for help confirming fitment or troubleshooting post-install issues.\u003c\/li\u003e\n  \u003cli\u003eTrusted by professional dealers for OEM-quality repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Stens 285-300 spindle assembly is aimed at owners and maintenance technicians of Ariens and Gravely zero-turn mowers or compatible tow-behind sweepers who need a reliable, OEM-matching replacement. It suits homeowners restoring a deck for cleaner cuts, landscape professionals replacing worn spindle units quickly, and DIY mechanics who prefer parts that include mounting hardware and a warranty for peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spindle fit my Ariens or Gravely model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your current spindle's part number or 6 7\/8\" dimension with the listed OEM numbers; if they match, this assembly fits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are mounting bolts included with the spindle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the assembly ships with mounting bolts for proper installation in most compatible decks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56806002884948,"sku":"B004HSFDN0","price":165.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-spindle-front-view.jpg?v=1786811287"},{"product_id":"stens-fire-silver-streak-trimmer-line-095-diameter-5-lb-spool-red-co-polymer-durable-round-line","title":"Stens Fire Silver Streak Trimmer Line .095\" Diameter 5 lb Spool — Red Co‑Polymer, Durable Round Line","description":"\u003cp\u003e\u003cstrong\u003eStens Fire Silver Streak trimmer line is a durable, high-visibility .095\" diameter co‑polymer line sold on a 5 lb (approx. 1425') branded spool and designed to replace Shindaiwa 09505.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty trimmer line is formulated from a co‑polymer blend for toughness and consistent cutting performance. The vivid red color improves visibility when winding and in use, while the round cross-section works with a wide range of string trimmers that accept a .095\" line. Packaged on a labeled spool, the 5 lb quantity provides long runtime between refills for commercial or property‑maintenance use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this trimmer line match my Shindaiwa 09505 replacement needs?\u003c\/h3\u003e\n\n\u003cp\u003eThe Stens Fire Silver Streak is sized specifically to be compatible with Shindaiwa part 09505 and other machines that accept .095\" diameter line. Match the diameter and spool capacity for proper fit and feed. Confirm your machine’s manual or existing spool markings before purchasing to ensure compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplaces Shindaiwa OEM 09505.\u003c\/li\u003e\n  \u003cli\u003eDiameter: .095\" to match spool openings and feed mechanisms.\u003c\/li\u003e\n  \u003cli\u003eSpool size: 5 lb (approx. 1425') for long service life between refills.\u003c\/li\u003e\n  \u003cli\u003eRound shape for broad tool compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect from this co‑polymer, round line?\u003c\/h3\u003e\n\n\u003cp\u003eThe co‑polymer construction balances flexibility with abrasion resistance to withstand typical yard and light commercial trimming tasks. The round profile delivers predictable feeding and smooth spool winding, while the heavier 0.095\" gauge holds up against thicker grass and light weeds. It’s not a specialty cutting blade but a reliable general‑purpose line for routine use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDurable co‑polymer resists breakage from impacts.\u003c\/li\u003e\n  \u003cli\u003eRound cross‑section for smooth feed and reduced vibration.\u003c\/li\u003e\n  \u003cli\u003e0.095\" gauge suitable for denser vegetation than thinner lines.\u003c\/li\u003e\n  \u003cli\u003eRed color improves visibility and spool handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much line do I get and how does that affect maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eThis spool contains approximately 1425 feet of .095\" line, packaged as a 5 lb branded spool to minimize downtime. A larger spool reduces the frequency of re‑spooling, making it cost‑effective for frequent users and pros. Keep spare spools on hand for uninterrupted work on mow days or commercial routes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eApproximate length: 1425 feet per 5 lb spool.\u003c\/li\u003e\n  \u003cli\u003eBranded spool for organized storage and easy identification.\u003c\/li\u003e\n  \u003cli\u003eLarger quantity lowers per‑foot cost and refill frequency.\u003c\/li\u003e\n  \u003cli\u003eFits most bump and fixed spool trimmer heads sized for .095\" line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the bright red color impact my trimming routine?\u003c\/h3\u003e\n\n\u003cp\u003eThe standout red color makes the line easier to see when winding, installing, and during operation, which speeds spool changes and reduces mistakes. That visibility is helpful for low-light starts or when matching left\/right feed lengths. Color does not affect cutting performance but improves handling and inventory identification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-visibility red aids quick installation and spool management.\u003c\/li\u003e\n  \u003cli\u003eEasy to distinguish among spare spools in a service truck or shed.\u003c\/li\u003e\n  \u003cli\u003eColor does not change wear properties—performance remains co‑polymer dependent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Stens Fire Silver Streak .095\" trimmer line on a 5 lb spool is aimed at landscapers, grounds crews, and homeowners who need a dependable, general‑purpose line with long runtime and easy visibility. It’s ideal if you run machines that specify or accept the Shindaiwa 09505 size and prefer bulk spools for fewer interruptions during trimming. Confirm fit with your equipment’s manual or existing spool dimensions before ordering to ensure proper feed and performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this line fit my Shindaiwa trimmer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your trimmer specifies .095\" line or lists Shindaiwa OEM 09505. Verify your machine manual or existing spool markings to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much line is on the spool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The spool contains approximately 1425 feet of .095\" co‑polymer line and weighs about 5 lb for extended use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56819190235476,"sku":"B004HS8JHC","price":98.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-fire-silver-streak-front-spool.jpg?v=1786961966"},{"product_id":"stens-deck-belt-for-wright-and-john-deere-efi-quiktrip-mowers-83-5-8-length-5-8-covered-width-fits-52-61-decks","title":"Stens deck belt for Wright and John Deere EFI QuikTrip mowers — 83 5\/8\" length, 5\/8\" covered width (fits 52\" \u0026 61\" decks)","description":"\u003cp\u003e\u003cstrong\u003eStens 265-752 is an OEM replacement deck belt engineered to restore reliable deck drive on Wright and compatible John Deere 52\" and 61\" EFI QuikTrip mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty covered belt is manufactured to the original equipment specification for Wright Mfg. part 71460107 and replaces John Deere TCU34219, offering a direct-fit solution for models with 52\" and 61\" decks. Made with a 5\/8\" covered width and an 83 5\/8\" length, it restores power transfer to mower pulleys, resists wear, and arrives in a branded sleeve for easy identification and storage. Whether you're a commercial user or a homeowner maintaining multiple machines, this belt is sized and shaped for quick swap-out and long service life.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will this belt fit?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 265-752 is designed for Wright-manufactured mowers and compatible John Deere models. It fits Wright models designated as New style Stander, Stander X (serial 53014+), and Sport X (serial 55864+), as well as John Deere 652R, 652B, 652R and 661R EFI QuikTrip mowers with 52\" and 61\" decks. Confirm serial numbers and deck width before purchase to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Wright Mfg. 71460107 and John Deere TCU34219\u003c\/li\u003e\n  \u003cli\u003eFits 52\" and 61\" EFI QuikTrip decks\u003c\/li\u003e\n  \u003cli\u003eCompatible with specified Wright Stander and Sport X serial ranges\u003c\/li\u003e\n  \u003cli\u003eDirect OEM-sizing for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this belt built and what performance can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe belt is a covered deck belt with a 5\/8\" width and an 83 5\/8\" effective length, constructed to match OEM materials and reinforcement for consistent pulley engagement. The cover protects internal cords from dirt and abrasion, extending service intervals and reducing slippage under load. Expect steady power transfer and reduced vibration when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovered belt construction resists abrasion and contaminants\u003c\/li\u003e\n  \u003cli\u003e5\/8\" width for correct pulley seating\u003c\/li\u003e\n  \u003cli\u003e83 5\/8\" length ensures OEM fitment and tensioning\u003c\/li\u003e\n  \u003cli\u003eManufactured to original spec for reliable engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard deck-belt replacement procedures: relieve tension, route the new belt per manufacturer diagrams, and re-tension. Inspect pulleys, idlers, and spindle bearings before fitting the new belt—worn components can shorten belt life. Keep the deck clean of debris and perform periodic tension checks to maintain optimal performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRoute belt according to mower-specific diagram\u003c\/li\u003e\n  \u003cli\u003eReplace worn pulleys or bearings to prevent premature wear\u003c\/li\u003e\n  \u003cli\u003eCheck belt tension after initial use and periodically thereafter\u003c\/li\u003e\n  \u003cli\u003eStore in sleeve away from heat and solvents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the packaging and sizing information help me verify the part?\u003c\/h3\u003e\n\u003cp\u003eThis belt ships in a branded sleeve that displays the Stens number and cross-reference information, making part verification simple. Physical dimensions—5\/8\" covered width and 83 5\/8\" length—are stamped or listed so you can compare against your old belt. The small package footprint also makes handling and storage convenient for shop use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBranded sleeve for quick visual confirmation\u003c\/li\u003e\n  \u003cli\u003eRecorded dimensions match OEM specifications\u003c\/li\u003e\n  \u003cli\u003eCompact packaging for easy storage in maintenance bays\u003c\/li\u003e\n  \u003cli\u003eSuitable for shops and field-service technicians\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This replacement belt is intended for landscape contractors, municipal crews, and homeowners who maintain Wright Stander and compatible John Deere EFI QuikTrip mowers. If you need an exact-fit deck belt to restore cutting performance and reduce downtime, and you can confirm model and serial compatibility, the Stens 265-752 is a practical OEM-grade option for routine service and seasonal rebuilds.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt replace Wright part 71460107?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Stens 265-752 is an OEM replacement for Wright Mfg. 71460107 and cross-references John Deere TCU34219.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What deck sizes and models are compatible?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Wright New style Stander\/Stander X (serial 53014+), Sport X (serial 55864+), and John Deere 52\" or 61\" EFI QuikTrip decks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56819357483348,"sku":"B005LA5D38","price":65.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-front-packaging.jpg?v=1786962604"},{"product_id":"stens-mower-deck-replacement-belt-265-137-for-exmark-lazer-z-52-60-72-111-5-x-5-8-covered-mule-drive-oem-fit","title":"Stens mower deck replacement belt 265-137 for Exmark Lazer Z 52\/60\/72\" — 111.5\" x 5\/8\" covered mule-drive, OEM fit","description":"\u003cp\u003e\u003cstrong\u003eStens 265-137 is a direct-fit OEM replacement covered mule-drive belt designed to replace Exmark part 1-633173 for Lazer Z 52\", 60\" and 72\" decks (serials 369,999 and lower).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn or damaged mower drive belt is slowing your commercial or residential cutting performance, choosing a precise replacement helps restore smooth deck operation. The Stens 265-137 belt matches the original Exmark dimensions and construction so you can swap it in without modifying pulleys or mounting points. This listing covers the belt’s measurements, compatibility, and practical details to help you confirm fit and plan the replacement.\u003c\/p\u003e\n\n\u003ch3\u003eWill this belt fit my Exmark Lazer Z mower?\u003c\/h3\u003e\n\n\u003cp\u003eThe Stens 265-137 is manufactured to match Exmark OEM 1-633173 specifications and is compatible with Lazer Z decks sized 52\", 60\" and 72\" when the mower serial number is 369,999 or lower. Always verify your deck width and serial number before purchasing. If your mower uses the same OEM number, this belt is intended as a direct swap.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM reference: Exmark 1-633173 (also shown as 633173)\u003c\/li\u003e\n  \u003cli\u003eDeck sizes: 52\", 60\", 72\"\u003c\/li\u003e\n  \u003cli\u003eSerial range: 369,999 and lower\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and construction of this belt?\u003c\/h3\u003e\n\n\u003cp\u003eThis is a covered mule-drive belt engineered for mower deck pulley systems. It measures 111 1\/2 inches in length and 5\/8 inch in width, matching the original equipment profile for reliable engagement and reduced slippage. The covered design adds protection against debris and accelerates belt life in typical lawn and turf conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLength: 111 1\/2\" (111.5 inches)\u003c\/li\u003e\n  \u003cli\u003eWidth: 5\/8\"\u003c\/li\u003e\n  \u003cli\u003eType: covered mule-drive belt for deck drive applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I prepare?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation follows standard mower belt replacement steps: remove the deck (or tip for access), release tensioning idlers, and route the new belt around pulleys following the mower’s belt diagram. Because this Stens belt is a direct OEM replacement, no belt trimming or pulley modification is typically required. Keep basic hand tools and safety equipment handy.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTools: socket set, screwdriver, gloves, safety glasses\u003c\/li\u003e\n  \u003cli\u003eProcedure: release tension, remove old belt, route new belt, restore tension\u003c\/li\u003e\n  \u003cli\u003eTip: photograph routing before removal to ensure correct reinstallation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat packaging and product details should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe belt ships in a branded sleeve to protect the belt profile during storage and transit and includes manufacturer labeling for easy identification. Package dimensions and weight are compact, making it simple to store a spare on-site. This single-unit package is ideal for technicians and fleet managers who keep replacement belts on hand.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePackaging: branded sleeve for protection and part ID\u003c\/li\u003e\n  \u003cli\u003ePackage size: approximately 17.13\" x 5.55\" x 1.61\"\u003c\/li\u003e\n  \u003cli\u003ePackage weight: about 1.0 pound; quantity: 1 belt per package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Stens 265-137 belt is aimed at lawncare professionals, equipment service shops, and homeowners who maintain Exmark Lazer Z mowers (serials 369,999 and lower) and need a reliable OEM-style replacement. If you require a belt that matches Exmark 1-633173 dimensions and wants straightforward installation with reduced downtime, this belt is a practical, inventory-friendly choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this belt the same as Exmark 1-633173?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Stens 265-137 is manufactured to replace Exmark OEM 1-633173 for compatible Lazer Z decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What deck sizes does this belt fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Exmark Lazer Z 52\", 60\", and 72\" decks for serial numbers 369,999 and lower.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56819590201684,"sku":"B000P91MW6","price":65.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-front-packaging-belt.jpg?v=1786963251"},{"product_id":"stens-speed-feed-450-trimmer-head-for-straight-shaft-trimmers-heavy-duty-no-bump-quick-feed-080-105-line","title":"Stens Speed Feed 450 Trimmer Head for Straight-Shaft Trimmers — Heavy-Duty, No-Bump Quick-Feed (.080–.105\" Line)","description":"\u003cp\u003e\u003cstrong\u003eThe Stens 385-288 Speed Feed 450 is a fast-feed replacement trimmer head that installs on most straight-shaft string trimmers and lets you quickly advance 0.080–0.105\" line without disassembling the spool.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty replacement head is designed to save time on the job by combining a large-capacity spool with a bump-free feed system compatible with many commercial and homeowner straight-shaft trimmers. It replaces specific OEM parts and accepts multiple line diameters, making it a flexible option for users who want fewer interruptions while trimming tall grass, weeds, and turf edges.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Speed Feed 450 make line changes faster?\u003c\/h3\u003e\n\u003cp\u003eThe head uses a quick-feed design that allows the operator to advance line without taking the cover off the spool. Instead of manually winding or disassembling, you pull and lock line segments into place, so you get back to trimming faster.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpool holds approximately 20' of 0.095\" line for long runtime between refills\u003c\/li\u003e\n  \u003cli\u003eCompatible with .080\", .095\" and .105\" diameters for flexibility\u003c\/li\u003e\n  \u003cli\u003eNo-bump or easy-advance operation reduces downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this head fit my trimmer model?\u003c\/h3\u003e\n\u003cp\u003eThe Stens Speed Feed 450 is built to fit most straight-shaft string trimmers, especially models over 25cc. It specifically replaces several OEM part numbers, so check compatibility with your trimmer’s manual or compare part numbers before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Shindaiwa part numbers 28820-08000 and 78890-21001\u003c\/li\u003e\n  \u003cli\u003eAlso replaces X047000580 and fits many Husqvarna-style straight shafts\u003c\/li\u003e\n  \u003cli\u003eRecommended for straight-shaft units greater than 25cc for optimal performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat line sizes can I use, and how much will it hold?\u003c\/h3\u003e\n\u003cp\u003eThe Speed Feed 450 accepts three common line diameters to suit different cutting needs. The spool capacity gives you enough line length to handle multiple jobs before refilling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts .080\", .095\", and .105\" nylon cutting line\u003c\/li\u003e\n  \u003cli\u003eSpool capacity roughly 20 feet when loaded with .095\" line\u003c\/li\u003e\n  \u003cli\u003eChoose thicker line for heavy weeds, thinner for lighter turf trimming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable is this replacement head?\u003c\/h3\u003e\n\u003cp\u003eManufactured to withstand professional use, the unit pairs a robust housing with an easy-to-service spool arrangement. Replacement parts and compatible lines are widely available, simplifying upkeep and extending the tool’s working life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for straight-shaft trimmers used in commercial and residential settings\u003c\/li\u003e\n  \u003cli\u003eSimple spool loading and common line sizes keep maintenance quick\u003c\/li\u003e\n  \u003cli\u003eReplaces specific OEM numbers for straightforward retrofitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Stens 385-288 Speed Feed 450 is ideal for landscaping pros, rental fleets, and homeowners with larger straight-shaft trimmers who want to reduce refill time and increase on-task trimming. If you regularly work with overgrown grass, thick weeds, or maintain multiple properties, this fast-feed head gives a reliable, flexible feed option that fits many straight-shaft machines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Speed Feed 450 fit Husqvarna straight-shaft trimmers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits many Husqvarna-style straight-shaft trimmers and replaces several OEM part numbers—verify your model’s compatibility before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What line diameters can I use with this head?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can use .080\", .095\" or .105\" line. The spool holds about 20' of .095\" line for extended runtime.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56819611697492,"sku":"B008G4GMOU","price":74.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-speed-feed-450-front-view.jpg?v=1786963286"},{"product_id":"stens-water-attachment-kit-for-stihl-ts410-12-blades-bracket-hose-o-rings-for-dust-suppression-and-blade-cooling","title":"Stens Water Attachment Kit for Stihl TS410 12\" Blades — Bracket, Hose \u0026 O-Rings for Dust Suppression and Blade Cooling","description":"\u003cp\u003e\u003cstrong\u003eStens 635-420 Water Attachment Kit is a replacement water-feed assembly designed to mount on Stihl TS410 Cutquik saws using 12\" blades, delivering controlled water flow to suppress dust and cool the blade.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you run a Stihl TS410 Cutquik with a 12\" blade and need a reliable water feed, this Stens water attachment kit provides the parts to restore or upgrade your saw’s wet cutting capability. The kit gathers the bracket, connectors, hose, o-rings and fasteners you’ll need to route water to the cutting area; it’s sold as a single replacement assembly and replaces Stens part number 635-420.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit connect to my TS410 Cutquik saw?\u003c\/h3\u003e\n\u003cp\u003eThe kit mounts to the saw using the included bracket and screws, and connects to the saw’s accessory port or aftermarket water source via the supplied hose and connector sleeve. Installation requires basic hand tools and alignment to the blade guard to direct water at the cutting edge.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes mounting bracket and screws for secure attachment\u003c\/li\u003e\n  \u003cli\u003eConnector sleeve and hose fit standard accessory outlets\u003c\/li\u003e\n  \u003cli\u003eO-rings ensure watertight seals at junctions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit other saws or blade sizes?\u003c\/h3\u003e\n\u003cp\u003eThis Stens assembly is made specifically for use with 12\" blades and Stihl TS410 Cutquik saws; it is not guaranteed for other models or blade diameters. Verify compatibility before ordering to ensure correct fit and reliable operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Stihl TS410 Cutquik saws\u003c\/li\u003e\n  \u003cli\u003eCompatible only with 12\" blade setups\u003c\/li\u003e\n  \u003cli\u003eReference OEM Stens number 635-420 for cross-checking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts come in the kit and what do they do?\u003c\/h3\u003e\n\u003cp\u003eThe kit assembles all necessary components to route and control water to the blade: a bracket to attach to the saw, fastening hardware, connectors and a length of hose, plus o-rings for reliable seals. These parts work together to focus water at the blade edge and keep connections leak-free under pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBracket and screws for mounting to the saw housing\u003c\/li\u003e\n  \u003cli\u003eHose and connector sleeve to carry water to the blade area\u003c\/li\u003e\n  \u003cli\u003eO-rings and clip to seal and secure fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for someone comfortable with basic saw maintenance; typical steps include removing the blade guard cover, attaching the bracket, routing the hose, and tightening fittings. Expect to spend 20–45 minutes depending on experience and whether the saw needs minor adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: screwdriver, wrench set, and adjustable pliers\u003c\/li\u003e\n  \u003cli\u003eFollow torque and alignment guidelines to avoid leaks\u003c\/li\u003e\n  \u003cli\u003eTest for leaks before full operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This water attachment kit is intended for contractors, rental shops, and owners of Stihl TS410 Cutquik saws who require a dependable water feed for dust suppression and blade cooling when using 12\" blades. It’s a practical OEM-quality replacement part when the original water assembly is lost, damaged, or worn and you want a complete set of components to restore wet-cutting capability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit compatible with non-Stihl saws?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This kit is designed for Stihl TS410 Cutquik saws with 12\" blades; compatibility with other brands or models is not guaranteed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include hoses and seals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes hose, connector sleeve, o-rings, screws, bracket and a securing clip for a complete assembly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56820371980628,"sku":"B00JW5Q5S0","price":70.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-water-attachment-front-mount_jpg.jpg?v=1786964964"},{"product_id":"stens-heavy-duty-flat-idler-for-exmark-toro-decks-0-625-id-5-75-od-metal-oem-fit","title":"Stens Heavy-Duty Flat Idler for Exmark\/Toro Decks — 0.625\" ID, 5.75\" OD, Metal OEM Fit","description":"\u003cp\u003e\u003cb\u003eStens 280-886 is a heavy-duty metal flat idler designed to replace Exmark and Toro part 1-413099, providing a robust bearing surface for lawn mower deck belt routing.\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty flat idler by Stens offers a direct-fit replacement for several Exmark and Toro decks where a durable, metal idler is required for higher-load belt applications. Manufactured by an OEM supplier to meet or exceed the original equipment profile, the 280-886 keeps belt tension stable and helps maintain consistent cutting performance when installed on compatible Exmark Lazer Z, Metro, Turf Tracer, Turf Ranger, and Lazer Z CT decks.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and materials of this idler?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 280-886 is a metal flat idler with a 0.625\" inner diameter and a 5.75\" outer diameter. Height and detailed dimensional callouts match OEM drawings so you can confirm fit before you buy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter (ID): 21\/32\" (0.625\")\u003c\/li\u003e\n  \u003cli\u003eOuter diameter (OD): 5 3\/4\"\u003c\/li\u003e\n  \u003cli\u003eOverall height (V): 2 7\/16\"\u003c\/li\u003e\n  \u003cli\u003eAdditional measurements: A 5 3\/4\", B 5 1\/4\", C 5\/8\", D 2\", E 1\/4\", F 1\/4\"\u003c\/li\u003e\n  \u003cli\u003eMaterial: heavy-duty metal for increased load capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich mower decks and OEM numbers does this replace?\u003c\/h3\u003e\n\u003cp\u003eThis idler is compatible with a range of Exmark and Toro deck models and directly replaces OEM numbers commonly found on those machines. Use the dimensions and model list to confirm compatibility with your deck before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Exmark: 116-4666 and 1-413099\u003c\/li\u003e\n  \u003cli\u003eReplaces Toro: 116-4666 and 1-413099\u003c\/li\u003e\n  \u003cli\u003eCompatible decks: Exmark Lazer Z HP (44\", 48\", 52\"), Metro HP (36\", 48\", 52\"), Turf Tracer HP (36\", 48\", 52\"), Turf Ranger, Lazer Z CT (48\")\u003c\/li\u003e\n  \u003cli\u003eVerify fit using OEM drawing or the listed measurements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this heavy-duty idler improve deck performance?\u003c\/h3\u003e\n\u003cp\u003eUsing a heavy-duty metal idler reduces wear under high belt tension and heavy loads, helping belts track smoothly and resist deformation. That steadier belt routing supports more consistent blade speed and can extend belt life when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves belt stability under load\u003c\/li\u003e\n  \u003cli\u003eReduces scalloping and uneven wear on belts\u003c\/li\u003e\n  \u003cli\u003eDesigned for higher-load deck applications\u003c\/li\u003e\n  \u003cli\u003eOEM-profile dimensions for reliable replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Stens 280-886 is aimed at professional landscapers, service technicians, and lawn mower owners who need a rugged, OEM-style idler for Exmark and Toro decks. If you operate high-hour equipment, work in tougher mowing conditions, or require dependable repair parts that match factory dimensions, this heavy-duty idler is a practical replacement option. Always verify measurements and OEM numbers against your machine or consult the deck drawing before purchase to ensure correct fitment.\u003c\/p\u003e\n\n\u003cdiv\u003e\n  \u003ch4\u003eProduct notes\u003c\/h4\u003e\n  \u003cp\u003eVerify part fits before purchasing. Made by an OEM supplier and intended for heavier load applications. For explanation of lettered dimensions, refer to the technical drawing available under More Info.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eFlat idler, metal construction, heavy-duty: TRUE\u003c\/li\u003e\n    \u003cli\u003eKey dimensions reiterated: ID 21\/32\", OD 5 3\/4\", Height 2 7\/16\"\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this idler fit my Exmark Lazer Z 48\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this Stens idler is listed as compatible with Exmark Lazer Z HP 48\" decks, but confirm measurements and OEM number before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a heavy-duty metal idler or plastic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This is a heavy-duty metal flat idler designed for higher load applications and longer wear life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56828730900820,"sku":"B001OKDAWU","price":78.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-280-886-front-view.jpg?v=1786996266"},{"product_id":"stens-kwik-loader-dual-line-trimmer-head-heavy-duty-fixed-head-8-pre-cut-lines-fits-095-155","title":"Stens Kwik Loader Dual-Line Trimmer Head — Heavy-Duty Fixed Head, 8 Pre-Cut Lines, Fits .095–.155","description":"\u003cp\u003e\u003cstrong\u003eThe Stens Kwik Loader 385-698 is a heavy-duty, fixed dual-line trimmer head that accepts eight pre-cut 8\" lines from 0.095\" to 0.155\" diameter for fast, tool-free reloading.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a durable aftermarket replacement, the Kwik Loader simplifies line changes while matching or exceeding OEM quality. Its stainless-steel line-locking system secures a variety of shaped trimmer lines and the head is engineered to fit straight-shaft trimmers from many popular brands. The package includes pre-cut line, adapters, color-coded mounting hardware, and clear instructions so you can get back to trimming quickly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Kwik Loader make reloading trimmer line faster?\u003c\/h3\u003e\n\u003cp\u003eReloading is streamlined because the head is built to accept eight pre-cut line segments rather than winding a continuous spool. Stainless steel locking points hold each line in place so pieces stay secure during use, reducing time spent disassembling and re-stringing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts eight 8\" pre-cut lines for quick replacement\u003c\/li\u003e\n  \u003cli\u003eStainless-steel line locks prevent slippage\u003c\/li\u003e\n  \u003cli\u003eColor-coded hardware and step-by-step instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat line sizes and types work with this head?\u003c\/h3\u003e\n\u003cp\u003eThe Kwik Loader accepts a broad range of diameters from 0.095\" up to 0.155\", letting you use everything from standard round line to more aggressive shaped and serrated lines. That flexibility helps you match cutting performance to the job—light yard work, thick grass, or tougher brush—without needing a different head.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with .095\" to .155\" diameter trimmer line\u003c\/li\u003e\n  \u003cli\u003eAccepts shaped, serrated, or square-profile line pieces\u003c\/li\u003e\n  \u003cli\u003eWorks with 8\" length segments for consistent feed and balance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the Kwik Loader fit my trimmer model?\u003c\/h3\u003e\n\u003cp\u003eThe head is designed for straight-shaft trimmers and installs with common adapters supplied in the kit. It is compatible with many major brands when using the appropriate adapter, including Craftsman, Echo, Husqvarna, Maruyama, Poulan\/Poulan Pro, Red Max, Sears, Shindaiwa, and Stihl.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes multiple adapters for broad fitment\u003c\/li\u003e\n  \u003cli\u003eIntended for straight-shaft trimmers and Grass Samurai head systems\u003c\/li\u003e\n  \u003cli\u003eCheck shaft thread and adapter selection for exact fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what extra supplies might I need?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with pre-cut line and mounting components so you can install and use the head right away. Replacement line packs and additional serrated line options are available separately if you prefer specialized cutting profiles or need extras for extended use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes four 8\" square .095\" pre-cut line pieces and color-coded hardware\u003c\/li\u003e\n  \u003cli\u003eAdapters for common straight-shaft trimmer connections and instructions included\u003c\/li\u003e\n  \u003cli\u003eReplacement serrated or shaped line sold separately in various lengths and pack sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Stens Kwik Loader 385-698 is ideal for homeowners, landscapers, and rental shops who want a rugged, easy-to-service trimmer head that reduces downtime. If you use a straight-shaft string trimmer for regular property maintenance or commercial work and prefer quick line changes without winding spools, this head provides a versatile, heavy-duty option that fits many major brands and supports a range of line types and diameters.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Kwik Loader fit my straight-shaft trimmer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this head fits most straight-shaft trimmers using the included adapters; verify shaft thread type for exact compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What line diameters can I use with the 385-698?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It accepts pre-cut line from 0.095\" up to 0.155\" diameter, including round, square, and serrated profiles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56829063135572,"sku":"B0014WN0AK","price":58.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-kwik-loader-front-assembly.jpg?v=1786996877"},{"product_id":"stens-solid-state-ignition-module-440-445-compatible-with-briggs-stratton-black-direct-fit-replacement","title":"Stens Solid State Ignition Module 440-445 Compatible with Briggs \u0026 Stratton — Black, Direct-Fit Replacement","description":"\u003cp\u003e\u003cstrong\u003eThe Stens 440-445 is a direct-fit solid state ignition module engineered to replace specific Briggs \u0026amp; Stratton OEM modules and restore reliable electronic ignition performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact black solid state module accepts the same mounting and electrical connections as the Briggs \u0026amp; Stratton parts it replaces, making it a practical choice for small engines that need a like-for-like electronic ignition replacement. Manufactured for aftermarket use and sourced from Argentina, the unit is intended to match OEM form, fit, and function where the listed part numbers apply.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Briggs \u0026amp; Stratton parts does this Stens module replace?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 440-445 is designed as a compatible replacement for several Briggs \u0026amp; Stratton ignition module part numbers. It covers common OEM references so you can swap modules without modifying the engine harness or mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Briggs \u0026amp; Stratton 799651\u003c\/li\u003e\n  \u003cli\u003eReplaces Briggs \u0026amp; Stratton 691060\u003c\/li\u003e\n  \u003cli\u003eReplaces Briggs \u0026amp; Stratton 592846\u003c\/li\u003e\n  \u003cli\u003eReplaces Briggs \u0026amp; Stratton 499447\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm compatibility with my engine?\u003c\/h3\u003e\n\u003cp\u003eVerify the original module’s part number and compare mounting hole spacing and connector style to ensure a match. If your engine currently uses one of the listed Briggs \u0026amp; Stratton part numbers and the connector and mounting align, the Stens 440-445 should install directly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck the OEM number stamped or printed on your old module\u003c\/li\u003e\n  \u003cli\u003eConfirm the physical connector and mounting hole pattern match\u003c\/li\u003e\n  \u003cli\u003eCompare dimensions visually or against manufacturer specs before purchasing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and use?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically follows the same steps as the original OEM module: disconnect battery power, remove the old module, mount the replacement, and reconnect wiring. Because it’s a solid state design, the Stens module has no moving parts and installs in the same footprint as the referenced Briggs \u0026amp; Stratton modules.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount using existing screw holes for a no-drill replacement\u003c\/li\u003e\n  \u003cli\u003ePlug into the existing electrical connector — no splicing if compatible\u003c\/li\u003e\n  \u003cli\u003eFollow standard safety procedures: disconnect battery and follow manufacturer torque specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the product specifics and origin?\u003c\/h3\u003e\n\u003cp\u003eThis aftermarket module is finished in black and is produced by Stens. It’s built to match the essential functional characteristics of the original components while offering an accessible replacement option for service and repair.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Stens\u003c\/li\u003e\n  \u003cli\u003eColor: Black finish for a discreet replacement\u003c\/li\u003e\n  \u003cli\u003eCountry of origin: Argentina\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Stens 440-445 solid state module is aimed at mechanics, lawn and garden equipment technicians, and DIY owners who need an affordable, drop-in replacement for specific Briggs \u0026amp; Stratton ignition modules. Choose this part when your engine lists one of the compatible OEM numbers, when the connector and mounting match, and when you want a straightforward replacement without re-wiring or modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this module fit my Briggs \u0026amp; Stratton engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your old module shows one of these OEM numbers (799651, 691060, 592846, 499447) and the connector\/mounting match, yes it should fit as a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Where is the Stens 440-445 manufactured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Stens 440-445 solid state module is manufactured in Argentina.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56829091676500,"sku":"B001OKA0SW","price":60.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-440-445-front-module.jpg?v=1786996932"},{"product_id":"stens-engine-maintenance-kit-for-kawasaki-fc420-14-hp-air-fuel-oil-filters-spark-plug-black","title":"Stens Engine Maintenance Kit for Kawasaki FC420 14 HP — Air, Fuel, Oil Filters + Spark Plug (Black)","description":"\u003cp\u003e\u003cstrong\u003eStens 785-664 is a ready-to-install engine maintenance kit that supplies air, fuel, oil filtration and a spark plug for Kawasaki FC420 14 HP engines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit combines essential wear items into one boxed package to simplify routine servicing for small engines such as the Kawasaki FC420 (14 HP) and compatible machines from Gravely and Snapper. It includes OEM-quality replacement components chosen to match factory specifications so you can complete a maintenance service quickly without tracking down separate parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts are included and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains an air filter, pre-filter, fuel filter, oil filter and a Champion spark plug — everything needed for a basic tune-up that addresses breathing, fueling and ignition. Replacing these items at recommended intervals protects engine performance and reduces wear on internal parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAir filter + pre-filter: keep dust and debris out of the carburetor and combustion chamber\u003c\/li\u003e\n  \u003cli\u003eFuel filter: prevents particulates from clogging fuel lines or injectors\u003c\/li\u003e\n  \u003cli\u003eOil filter: maintains oil cleanliness to protect bearings and cylinders\u003c\/li\u003e\n  \u003cli\u003eChampion spark plug: ensures consistent ignition and easier starting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and machines will this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is made specifically for the Kawasaki FC420V series 14 HP engines and lists common compatible models to help confirm fitment. It also replaces certain OEM part numbers used by other brands, so it can serve as a direct replacement in multiple machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKawasaki: FC420V — 14 HP engines\u003c\/li\u003e\n  \u003cli\u003eGravely: compatible with Pro 140 and Pro 150 models\u003c\/li\u003e\n  \u003cli\u003eSnapper replacement reference: replaces Snapper 705058\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any fuel or installation limitations I should know about?\u003c\/h3\u003e\n\u003cp\u003eObserve the fuel compatibility and installation notes before using the kit. The kit’s components are supplied in a branded box and require no assembly, but the engine should be cooled and handled safely during service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFuel note: not compatible with fuels containing over 10% ethanol (E10 maximum)\u003c\/li\u003e\n  \u003cli\u003ePackaging: arrives in a Stens branded box for identification and part protection\u003c\/li\u003e\n  \u003cli\u003eInstallation: parts are direct-fit; no additional assembly required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit save time compared to buying parts individually?\u003c\/h3\u003e\n\u003cp\u003eBuying a bundled maintenance kit eliminates the need to match multiple part numbers and source each component separately. It consolidates routine service items into one purchase so you can complete a scheduled maintenance session in a single visit to your workbench.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne SKU covers common service items for quick ordering and inventory control\u003c\/li\u003e\n  \u003cli\u003eComponents matched to factory specifications for compatibility and fit\u003c\/li\u003e\n  \u003cli\u003eReduces downtime by providing everything needed for a standard tune-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, lawn care professionals, fleet managers and DIY homeowners who maintain Kawasaki FC420 14 HP engines or compatible Gravely and Snapper models will benefit from this Stens maintenance kit. It’s ideal for anyone seeking a straightforward, OEM-replacement set of filters and a spark plug to perform routine engine care quickly and with confidence.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit Kawasaki FC420 14 HP engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s designed for Kawasaki FC420V 14 HP engines and lists compatible models like Gravely Pro 140\/150.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use fuel with more than 10% ethanol?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the kit components are not compatible with fuels over 10% ethanol (E10 maximum).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56829195813204,"sku":"B001OK9UEW","price":80.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-785-664-front-packaging.jpg?v=1786997139"},{"product_id":"stens-turf-rider-13x5-00-6-lawn-garden-tire-2-ply-turf-friendly-traction","title":"Stens Turf Rider 13x5.00-6 Lawn \u0026 Garden Tire — 2-Ply, Turf-Friendly Traction","description":"\u003cp\u003e\u003cstrong\u003eThe Stens 160-005 13x5.00-6 Turf Rider 2-ply tire is a replacement lawn and garden tire built for turf-friendly traction, puncture resistance and reliable service on small ride-on mowers and utility carts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you need a compact tire that balances grip and turf protection, this 13x5.00-6 Turf Rider by Stens is designed to fit many residential and commercial mowing machines. Its 2-ply construction gives added sidewall strength compared with single-ply alternatives while keeping ride comfort and a low profile that minimizes scuffing on grass. The tire is produced in the United States and packaged for safe shipping.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tire fit my mower or garden cart?\u003c\/h3\u003e\n\u003cp\u003eCheck the tire size and rim compatibility on your equipment — the marking 13x5.00-6 indicates overall tire diameter and width paired with a 6-inch rim. Match the size exactly and confirm bolt pattern and axle clearance before purchase. If you have the old tire available, verify its stamped size to avoid fitting issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize: 13x5.00-6 — fits 6-inch rims\u003c\/li\u003e\n  \u003cli\u003eCommon applications: ride-on mowers, lawn tractors, garden carts\u003c\/li\u003e\n  \u003cli\u003eConfirm axle type and clearance before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow tough is the 2-ply construction for yard use?\u003c\/h3\u003e\n\u003cp\u003eTwo plies provide stronger sidewall resistance to punctures and pinch flats versus a single-ply tire, making it better suited to uneven terrain, driveways with gravel, and frequent use. It’s not an off-road heavy-duty tire but offers a durable middle ground for residential and light commercial chores.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-ply casing for improved puncture resistance\u003c\/li\u003e\n  \u003cli\u003eReinforced sidewalls reduce pinch flats\u003c\/li\u003e\n  \u003cli\u003eBalanced for turf protection and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of traction and turf protection does it provide?\u003c\/h3\u003e\n\u003cp\u003eThe tread pattern is tuned to give traction without aggressive digging, preserving lawn surfaces while maintaining control on inclines and turns. Expect predictable handling during mowing and light hauling, with less turf tearing than knobby agricultural patterns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurf-friendly tread minimizes lawn scuffing\u003c\/li\u003e\n  \u003cli\u003eGood grip for mowing slopes and pulling light loads\u003c\/li\u003e\n  \u003cli\u003eLow-profile shape for even weight distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about shipping, dimensions, and weight?\u003c\/h3\u003e\n\u003cp\u003eThis Stens tire ships in a compact package sized roughly 11.176 cm by 30.48 cm by 30.48 cm and weighs about 40.0 lbs. It’s manufactured in the United States and packaged to protect the bead and tread during transit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage dimensions: approx. 11.176 cm L x 30.48 cm W x 30.48 cm H\u003c\/li\u003e\n  \u003cli\u003ePackage weight: approximately 40.0 lbs\u003c\/li\u003e\n  \u003cli\u003eOrigin: United States manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Stens 160-005 Turf Rider 13x5.00-6 2-ply tire is intended for homeowners, landscapers and small-scale groundskeepers who want a dependable, turf-conscious replacement tire for mowers, tractors and utility wagons. Choose this tire if you need improved sidewall durability over single-ply options, predictable handling on grass, and a US-made product packaged for protected delivery. If you require heavy-duty off-road performance or specialized industrial tires, consider a different tread design or ply rating to match those demands.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Stens 13x5.00-6 tire tubeless or tube type?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most small mower tires like this are tube-type; check your rim or product spec to confirm tube requirement before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this tire on gravel driveways?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 2-ply design is better for light gravel and rough surfaces, but avoid heavy off-road use for best lifespan.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56829291168084,"sku":"B01LYLUZ0O","price":75.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-160-005-front-profile.jpg?v=1786997329"},{"product_id":"stens-replacement-deck-belt-for-john-deere-lx-series-64-1-2-x-5-8-cogged-fits-42c-48-52-decks","title":"Stens Replacement Deck Belt for John Deere LX Series 64-1\/2\" x 5\/8\" Cogged — Fits 42C\/48\"\/52\" Decks","description":"\u003cp\u003e\u003cstrong\u003eStens 265-242 is a cogged OEM-style replacement deck belt engineered to restore reliable deck drive on compatible John Deere lawn tractors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your mower cutting consistently by replacing a worn or cracked deck belt with this direct-fit Stens part. Made to the same belt profile used by original equipment, the 64 1\/2\" long, 5\/8\" wide cogged belt matches factory routing and tension requirements for many John Deere LX and GT series machines. It ships in a branded sleeve and arrives ready for straightforward installation—no trimming or splicing required.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models and decks will this belt fit?\u003c\/h3\u003e\n\u003cp\u003eThis Stens belt is designed to replace specific John Deere part numbers and fit multiple LX and GT tractors with mid- to full-size decks. Confirming compatibility with your serial number or existing belt number before ordering prevents returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacements for John Deere M118684, M143019, M144677\u003c\/li\u003e\n  \u003cli\u003eCompatible with LX255, LX277, LX279, LX288, LX277AWS, LX280, LX289\u003c\/li\u003e\n  \u003cli\u003eWorks with 42C, 48\" and 52\" deck widths; fits GT242, GT262, GT275 with 48\" decks\u003c\/li\u003e\n  \u003cli\u003eCogged profile matches factory belt routing and pulley engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this replacement belt and what are the specs?\u003c\/h3\u003e\n\u003cp\u003eThe belt uses a cogged construction that helps it flex around small-diameter pulleys while resisting heat and wear from modern deck designs. Measured dimensions and packaging info give installers the details they need to verify fit and handle the part safely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 64 1\/2 inches — matches original equipment length\u003c\/li\u003e\n  \u003cli\u003eWidth: 5\/8 inch with cogged profile for improved flexibility\u003c\/li\u003e\n  \u003cli\u003ePackaged in a branded sleeve for identification and storage\u003c\/li\u003e\n  \u003cli\u003eItem package weight ~18.6 lb and dimensions 24.2 x 23.5 x 13.5 inches (shipping carton)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does installation involve and what should I check first?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the mower’s belt routing diagram; on many machines the deck must be lowered or removed for access. Before installing, compare the new belt to the old one and inspect pulleys and idlers for wear to prevent premature belt failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch the belt length and cog pattern to the removed belt\u003c\/li\u003e\n  \u003cli\u003eInspect spindle pulleys, idler bearings, and tension springs for smooth operation\u003c\/li\u003e\n  \u003cli\u003eFollow mower-specific routing; refer to owner’s manual or underside deck sticker\u003c\/li\u003e\n  \u003cli\u003eReplace worn hardware while you have the deck accessible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this belt work as an exact OEM replacement?\u003c\/h3\u003e\n\u003cp\u003eYes — this Stens belt is manufactured to meet the same fit and functional requirements as the referenced John Deere part numbers, offering a dependable aftermarket alternative. It’s sold as a single, ready-to-install belt and intended to match original routing and tension specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces John Deere M118684, M143019, M144677 without modification\u003c\/li\u003e\n  \u003cli\u003eSold as one complete belt in branded sleeve packaging\u003c\/li\u003e\n  \u003cli\u003eCogged design preserves pulley contact and reduces slippage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This replacement deck belt is for homeowners, landscapers and equipment technicians who own compatible John Deere LX or GT series lawn tractors and need a reliable, OEM-fit belt to restore deck drive. Choose this Stens belt when you want a straightforward swap that matches factory specifications and helps the mower return to consistent cutting performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt replace John Deere part M118684?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Stens 265-242 replaces John Deere M118684, as well as M143019 and M144677.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What deck sizes does this belt fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits 42C, 48\" and 52\" decks and select GT models with 48\" decks—confirm your tractor model before buying.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56829514318164,"sku":"B001OK6L9Y","price":62.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-belt-front-packaging_73059920-4afe-4dff-81d2-b8ecf7cfbe7d.jpg?v=1786997777"},{"product_id":"stens-replacement-mower-deck-belt-for-ariens-gravely-7200523-130-covered-belt-1-2-width-for-zoom-42-50-and-ikon-x-42","title":"Stens replacement mower deck belt for Ariens\/Gravely 7200523 — 130\" covered belt, 1\/2\" width for Zoom 42\"\/50\" and Ikon-X 42\"","description":"\u003cp\u003e\u003cstrong\u003eHigh-quality Stens OEM replacement belt designed to match Ariens\/Gravely OEM 7200523 specifications for smooth, reliable mower deck power transfer.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a deck belt wears out or slips, mowing becomes uneven and inefficient. This Stens replacement belt (part number 265-647) is made to the same size and covered construction as the Ariens\/Gravely OEM 7200523, offering a direct-fit solution for Zoom 42\", Zoom 50\" and Ikon-X 42\" decks. Built to belt-application standards for gas-powered riding mowers, it restores belt tension, reduces vibration, and keeps blades turning consistently.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines and decks is this belt compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis belt is manufactured to replace OEM number 7200523 and fits several Ariens and Gravely models. Confirm fit by checking your mower’s parts list or existing belt number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Ariens: Zoom 42\" and Zoom 50\", Ikon-X 42\" decks\u003c\/li\u003e\n  \u003cli\u003eFits Gravely: at 34\", at 42\", and at 50\" decks\u003c\/li\u003e\n  \u003cli\u003eOEM reference: Ariens\/Gravely 7200523; Stens part: 265-647\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the belt’s dimensions and construction?\u003c\/h3\u003e\n\u003cp\u003eThe Stens belt follows OEM sizing and construction to ensure reliable operation on mower decks. It’s a covered deck belt engineered for the lengths and widths used by these mower models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 130 inches overall\u003c\/li\u003e\n  \u003cli\u003eWidth: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003eType: covered belt designed for deck pulley systems\u003c\/li\u003e\n  \u003cli\u003eApplication: mower deck power transmission on gas riding mowers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will replacing my belt with this Stens part improve performance?\u003c\/h3\u003e\n\u003cp\u003eSwapping a worn belt for an OEM-equivalent restores proper blade speed and tension, reducing slippage and uneven cutting. The covered construction helps protect internal cords and extends service life compared with frayed or glazed belts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces belt slipping under load for smoother cutting\u003c\/li\u003e\n  \u003cli\u003eRestores correct blade RPM and mowing consistency\u003c\/li\u003e\n  \u003cli\u003eCovered surface resists wear, debris, and chord exposure\u003c\/li\u003e\n  \u003cli\u003eDirect-fit sizing minimizes installation adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing this replacement belt?\u003c\/h3\u003e\n\u003cp\u003eVerify the part number and inspect pulleys, idlers, and deck components to ensure the new belt runs true. Replacing worn pulleys or tensioners at the same time prevents premature belt wear and improves longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your OEM belt number is 7200523 or measure to 130\" length\u003c\/li\u003e\n  \u003cli\u003eCheck pulleys\/idlers for grooves, corrosion, or wobble\u003c\/li\u003e\n  \u003cli\u003eClean deck and remove debris before fitting the new belt\u003c\/li\u003e\n  \u003cli\u003eUse proper routing diagrams from the mower manual for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Stens 265-647 replacement belt is for owners and technicians of Ariens Zoom 42\" and 50\" decks, Ikon-X 42\" decks, and compatible Gravely decks who need a direct-fit, OEM-equivalent belt. It's intended for gas-powered riding mowers requiring a 1\/2\" wide, 130\" long covered deck belt and for anyone wanting to restore reliable deck performance without modifying factory components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this Stens belt replace Ariens OEM 7200523?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Stens part 265-647 is made to replace Ariens\/Gravely OEM 7200523 for the listed mower decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size is the belt and where is it used?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt is 130 inches long and 1\/2 inch wide, designed for mower deck power transfer on gas riding mowers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56829893607764,"sku":"B07G7HGYWB","price":61.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-belt-front-view.jpg?v=1786999309"},{"product_id":"stens-pto-drive-belt-for-cub-cadet-z-force-79-3-4-x-5-8-fits-44-48-54-decks-kohler-2011-older","title":"Stens PTO Drive Belt for Cub Cadet Z-Force 79-3\/4\" x 5\/8\" — Fits 44\/48\/54\" Decks, Kohler 2011 \u0026 Older","description":"\u003cp\u003e\u003cstrong\u003eStens 265-800 is a direct-fit replacement PTO drive belt for Cub Cadet Z-Force mowers with 44\", 48\" and 54\" decks, matching the original 79-3\/4\" length and 5\/8\" width.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Cub Cadet Z-Force mower from 2011 or earlier is slipping, squealing, or failing to engage the deck, the worn PTO belt is often the culprit. The Stens 265-800 reproduces the OEM Cub Cadet 01009787 dimensions and covered construction so you can restore reliable deck engagement without modifying pulleys or hardware. This belt is built to the same footprint as the original, making it a straightforward swap for homeowners and service technicians.\u003c\/p\u003e\n\n\u003ch3\u003eWill this belt fit my Cub Cadet model and engine year?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the Stens 265-800 was designed to replace Cub Cadet part number 01009787 and fits Z-Force models equipped with 44\", 48\" or 54\" mowing decks paired with Kohler engines from model years 2011 and older. Confirm fit by comparing belt length and width to the original belt or your parts manual before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM Cub Cadet 01009787\u003c\/li\u003e\n  \u003cli\u003eCompatible with Z-Force 44\", 48\", 54\" decks\u003c\/li\u003e\n  \u003cli\u003eIntended for Kohler engines (2011 and older)\u003c\/li\u003e\n  \u003cli\u003eCheck mower manual or current belt markings for confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the Stens 265-800 belt and what kind of performance can I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe belt uses a covered construction that protects internal cords from debris and wear, helping it maintain tension and resist glazing under normal mowing conditions. While life depends on mower use, deck adjustments, and maintenance, the covered design extends service life compared with uncovered belts in similar applications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCovered belt resists dirt and abrasion\u003c\/li\u003e\n  \u003cli\u003eMatches OEM dimensions to reduce slippage\u003c\/li\u003e\n  \u003cli\u003eMaintains proper tension when installed correctly\u003c\/li\u003e\n  \u003cli\u003eIdeal for routine residential mowing schedules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install this replacement belt on my deck?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is typically a simple process: remove the old belt, route the new belt around the deck pulleys following the mower's belt diagram, and ensure proper tension and pulley alignment. For safety, always disconnect the spark plug and consult the mower owner’s manual for specific routing and tensioning steps.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDisconnect spark plug before starting work\u003c\/li\u003e\n  \u003cli\u003eFollow the deck routing diagram in the manual\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and idlers for wear during replacement\u003c\/li\u003e\n  \u003cli\u003eAdjust belt tension to manufacturer specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the belt's exact measurements and application type?\u003c\/h3\u003e\n\n\u003cp\u003eThe Stens 265-800 measures 79-3\/4 inches long and 5\/8 inch wide, and it is specified for PTO (power take-off) deck drive applications. Those dimensions match the original Cub Cadet 01009787, so you can expect correct seating on the deck pulleys without trimming or modification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLength: 79-3\/4\" (measured around belt circumference)\u003c\/li\u003e\n  \u003cli\u003eWidth: 5\/8\" for correct pulley fit\u003c\/li\u003e\n  \u003cli\u003eApplication: PTO deck drive belt\u003c\/li\u003e\n  \u003cli\u003eCovered construction for protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Stens 265-800 is aimed at homeowners and small-property landscapers who maintain Cub Cadet Z-Force mowers (44\", 48\", 54\" decks) with Kohler engines from 2011 or earlier, plus independent repair shops that want an OEM-dimension replacement belt. If you want an easy, like-for-like belt swap to restore deck engagement and reduce slipping or noise, this belt provides the correct size and covered construction to do the job without alteration.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt replace Cub Cadet part 01009787?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Stens 265-800 is a direct replacement for Cub Cadet 01009787 with matching length and width.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this belt on Z-Force decks of all sizes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Z-Force models with 44\", 48\" and 54\" decks paired with Kohler engines from 2011 and earlier.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56829897802068,"sku":"B006RYYI4M","price":62.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-belt-front-packaging_0c281b86-dff4-447f-927d-b42ef3b0a0ac.jpg?v=1786999342"},{"product_id":"stens-replacement-pump-drive-belt-for-ferris-is1500zx-is2000z-is1500z-1-2-x-64-1-2-banded-raw-edge-usa-made","title":"Stens Replacement Pump\/Drive Belt for Ferris IS1500ZX IS2000Z IS1500Z — 1\/2\" x 64-1\/2\", banded raw-edge, USA-made","description":"\u003cp\u003e\u003cstrong\u003eThe Stens OEM replacement belt (754-04083 \/ 954-04083) is a banded, raw-edge pump\/drive belt sized 1\/2\" x 64 1\/2\" engineered to replace Ferris part numbers 5100555, 5022314SM and fit most IS1500ZX, IS2000Z and IS1500Z series mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ferris commercial or residential mower needs a reliable pump or drive belt, choosing an exact-fit OEM replacement prevents slippage, reduces downtime and preserves factory performance. This Stens-made belt (also referenced as 266-156) is manufactured in the USA to the same footprint and construction used by Ferris, so installation and tensioning follow the original equipment specifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this belt match the original Ferris equipment?\u003c\/h3\u003e\n\u003cp\u003eThe Stens belt is produced to the same dimensional and construction standards as the Ferris OEM parts it replaces. It carries identical width and length, a banded raw-edge design for pulley engagement, and the same application for pump and drive systems, ensuring compatibility with factory routing and tensioners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Ferris OEM numbers: 5100555, 5022314SM, 5022314\u003c\/li\u003e\n  \u003cli\u003eWidth: 1\/2\" and Length: 64 1\/2\" for exact fit\u003c\/li\u003e\n  \u003cli\u003eBanded, raw-edge construction for reliable pulley contact\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for pump\/drive applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this belt fit my IS1500ZX, IS2000Z, or IS1500Z mower?\u003c\/h3\u003e\n\u003cp\u003eThis belt fits most machines in those Ferris series that use the 1\/2\" x 64 1\/2\" banded raw-edge belt for pump or drive duties. Confirm fit by checking your mower’s parts diagram or the OEM number on the old belt; the Stens product replaces the listed Ferris part numbers directly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with most IS1500ZX, IS2000Z, IS1500Z models\u003c\/li\u003e\n  \u003cli\u003eCross-references: Ferris 5100555, 5022314SM, 5022314\u003c\/li\u003e\n  \u003cli\u003eWorks for pump and drive pulley layouts using this belt size\u003c\/li\u003e\n  \u003cli\u003eEasy verification: match dimensions or OEM stamp on old belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and performance features of this belt?\u003c\/h3\u003e\n\u003cp\u003eThe belt is a banded, raw-edge style that provides stable contact with pulleys while resisting flex fatigue and edge fraying. Being manufactured in the USA to OEM specifications, it balances durability with the flexibility needed for proper tensioning and smooth power transmission.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRaw-edge design for consistent pulley engagement\u003c\/li\u003e\n  \u003cli\u003eBanded finish increases tensile integrity and lifespan\u003c\/li\u003e\n  \u003cli\u003eSuitable for both pump and drive applications on compatible mowers\u003c\/li\u003e\n  \u003cli\u003eMade in the USA to OEM-equivalent standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain this replacement belt?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the mower’s factory routing and tensioning procedure—install with correct tension, inspect pulleys and idlers for wear, and run the belt for a short period then re-check tension. Regular inspection for cracks, glazing, or frayed edges will prolong service life and prevent unexpected failures during operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFollow Ferris routing and tension specifications during install\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys, idlers, and tensioners before fitting\u003c\/li\u003e\n  \u003cli\u003eRe-check belt tension after a short run-in period\u003c\/li\u003e\n  \u003cli\u003eReplace if signs of cracking, glazing, or fraying appear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Stens replacement belt is designed for service technicians, landscape professionals and homeowners who maintain Ferris IS1500ZX, IS2000Z or IS1500Z series mowers and need an exact-fit OEM-equivalent belt for pump or drive systems. Choose this part if you want a direct cross-reference to Ferris part numbers 5100555 \/ 5022314SM and a USA-made banded belt that matches factory dimensions and construction for dependable mower performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this Stens belt replace Ferris part 5100555?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Stens belt is a direct replacement for Ferris part 5100555 and cross-references 5022314SM\/5022314.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions and type?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is a banded, raw-edge belt sized 1\/2\" wide by 64 1\/2\" long for pump\/drive applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56829907534164,"sku":"B07G7HZ59W","price":61.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-belt-front-packaging_03088685-d875-4147-a4a5-0d8cdc8f3b12.jpg?v=1786999432"},{"product_id":"stens-replacement-cogged-v-belt-for-scag-483157-65-1-4-x-5-8-rh-deck-pump-drive","title":"Stens replacement cogged V-belt for Scag 483157 — 65-1\/4\" x 5\/8\", RH deck\/pump drive","description":"\u003cp\u003e\u003cstrong\u003eStens 265-864 is an OEM-style cogged replacement belt designed to match Scag 483157 for RH deck and pump drive applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis high-quality Stens replacement belt is engineered as a direct-fit option for Scag walk-behind and stand-on mowers using RH deck or pump drive configurations. With a cogged profile, 65-1\/4\" length and 5\/8\" width, it restores correct belt routing and tension for smooth power transfer. Packaged in a branded sleeve, the part is sized and labeled for fast verification and installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill this belt fit my Scag model?\u003c\/h3\u003e\n\u003cp\u003eStens 265-864 is produced to replace Scag part numbers 483084 and 483157 and fits several Scag series. It is compatible with specific STC, STWC and SMWC deck and pump setups; always compare measurements and routing with your original belt before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Scag OEM: 483084, 483157\u003c\/li\u003e\n  \u003cli\u003eCompatible with Scag: STC, STWC, SMWC models\u003c\/li\u003e\n  \u003cli\u003eMeasures 65 1\/4\" long and 5\/8\" wide\u003c\/li\u003e\n  \u003cli\u003eDesigned for RH deck and pump drive installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the cogged design benefit mower performance?\u003c\/h3\u003e\n\u003cp\u003eThe cogged profile increases flexibility, reduces heat buildup, and maintains better traction on small pulleys. That leads to smoother engagement and less slippage under load compared with a smooth belt in tight pulley arrangements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCogged ribs improve bendability around idlers and tight pulleys\u003c\/li\u003e\n  \u003cli\u003eEnhanced heat dissipation for longer belt life\u003c\/li\u003e\n  \u003cli\u003eBetter grip reduces slipping during heavy grass or steep terrain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical specs I should check before installation?\u003c\/h3\u003e\n\u003cp\u003eConfirm the belt length, width and tooth profile match your machine’s requirements. Also verify routing (RH deck\/pump) and pulley sizes to ensure a correct fit and optimal tension once installed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 65 1\/4\" (measured outside circumference)\u003c\/li\u003e\n  \u003cli\u003eWidth: 5\/8\" (0.625 inches)\u003c\/li\u003e\n  \u003cli\u003eType: cogged v-belt for reduced bending stress\u003c\/li\u003e\n  \u003cli\u003ePackaging: branded sleeve for part identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I replace the belt to avoid damage?\u003c\/h3\u003e\n\u003cp\u003eAlways disconnect spark and follow mower safety steps before working near pulleys or blades. Release belt tension, note routing or photograph it, then slide the old belt off and route the new belt carefully to avoid twisting the cogs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePark mower on level ground and remove ignition key\u003c\/li\u003e\n  \u003cli\u003eRelieve tension via idler or tensioner mechanism before removal\u003c\/li\u003e\n  \u003cli\u003eMatch cog orientation and routing to original belt; avoid twisting\u003c\/li\u003e\n  \u003cli\u003eAfter installation, check tension and run briefly to confirm proper tracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Ideal for owners and technicians of Scag STC, STWC and SMWC machines who need a reliable, OEM-compatible RH deck or pump belt replacement. If you maintain your mower for landscaping, groundskeeping, or seasonal yard care and require a durable cogged belt that matches Scag part numbers 483084\/483157, Stens 265-864 is a cost-effective choice that restores factory-style performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does Stens 265-864 replace Scag 483157?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Stens 265-864 is an OEM-style replacement that corresponds to Scag part 483157 and also replaces 483084.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt is 65-1\/4 inches long with a 5\/8 inch width and a cogged profile for tight pulley systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56830104633684,"sku":"B001OKD9EO","price":55.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-replacement-belt-front-packaging.jpg?v=1787001361"},{"product_id":"stens-replacement-drive-belt-for-scag-483172-65-5-x-5-8-cogged-for-tiger-cat-tiger-cub-wildcat-oem-fit-durability","title":"Stens replacement drive belt for Scag 483172 — 65.5\" x 5\/8\" cogged for Tiger Cat\/Tiger Cub\/Wildcat, OEM-fit durability","description":"\u003cp\u003e\u003cstrong\u003eStens 265-865 is an OEM-style cogged drive belt made to replace Scag part 483172, sized 65 1\/2\" long and 5\/8\" wide for Tiger Cat, Tiger Cub and Wildcat models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Scag commercial lawn mower needs a direct-fit drive belt, this Stens replacement mirrors the original equipment profile so it installs cleanly and runs smoothly under load. The belt is a cogged type, packaged in a branded sleeve, and manufactured to OEM specifications to match size, tooth pattern, and flexible strength for small engine outdoor power equipment.\u003c\/p\u003e\n\n\u003ch3\u003eWill this belt fit my Scag Tiger Cat, Tiger Cub, or Wildcat?\u003c\/h3\u003e\n\n\u003cp\u003eYes—Stens 265-865 is specified as a direct replacement for Scag part number 483172 and is designed for those model families. Confirm the listed length and width against your existing belt or parts diagram to ensure compatibility before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLength: 65 1\/2\" (65.5 inches)\u003c\/li\u003e\n  \u003cli\u003eWidth: 5\/8\" (0.625 inches)\u003c\/li\u003e\n  \u003cli\u003eBelt type: cogged (toothed) drive belt\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM: Scag 483172\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does a cogged drive belt benefit mower performance?\u003c\/h3\u003e\n\n\u003cp\u003eCogged belts flex more easily around pulleys while maintaining grip, reducing heat buildup and slippage compared with plain belts. That flexibility helps the belt track better in tight pulley layouts common to commercial mowers, supporting reliable power transfer from engine to deck.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eImproved flexibility reduces premature cracking\u003c\/li\u003e\n  \u003cli\u003eToothed profile helps consistent belt-to-pulley engagement\u003c\/li\u003e\n  \u003cli\u003eLower heat accumulation for longer service life\u003c\/li\u003e\n  \u003cli\u003eOEM-spec sizing preserves drive geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before replacing the belt?\u003c\/h3\u003e\n\n\u003cp\u003eInspect the current belt for length, width, tooth profile, and visible wear such as fraying, glazing, or missing teeth. Also verify pulley alignment and tensioner condition—replacing the belt on worn pulleys or a faulty tensioner shortens the new belt's life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch part numbers: confirm Scag 483172 equivalence\u003c\/li\u003e\n  \u003cli\u003eMeasure an existing belt to verify 65.5\" x 5\/8\" sizing\u003c\/li\u003e\n  \u003cli\u003eCheck pulleys for grooves or scoring\u003c\/li\u003e\n  \u003cli\u003eReplace tensioners or idlers if they wobble or bind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this Stens replacement and what packaging does it come in?\u003c\/h3\u003e\n\n\u003cp\u003eThe Stens 265-865 is produced to meet OEM specifications and arrives in a branded sleeve to keep the belt protected in transit. It’s constructed for heavy-duty outdoor power applications; proper installation and compatible pulleys are key to achieving expected durability.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eManufactured to OEM-style specifications\u003c\/li\u003e\n  \u003cli\u003eBranded sleeve packaging for protection\u003c\/li\u003e\n  \u003cli\u003ePackage weight approximately 0.55 pounds\u003c\/li\u003e\n  \u003cli\u003eIntended for small engine outdoor power equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Stens OEM replacement belt is intended for owners and service technicians of Scag Tiger Cat, Tiger Cub, and Wildcat mowers who need a reliable, direct-fit drive belt to restore proper deck or drive function. It's also suited for fleet maintenance shops and DIYers who prefer OEM-spec parts for consistent machine performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this belt an exact replacement for Scag 483172?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Stens 265-865 is listed to replace Scag part 483172; confirm 65.5\" length and 5\/8\" width before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this belt on any Scag model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Tiger Cat, Tiger Cub, and Wildcat models specified; other models require checking belt size and pulley layout for compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56830112465236,"sku":"B001OK9RTK","price":56.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-belt-front-packaging_74b3aee0-b47b-463d-b648-0fe54195523d.jpg?v=1787001442"},{"product_id":"stens-starter-rope-3-16-x-100-size-6-high-tensile-low-stretch-wear-resistant-pull-cord","title":"Stens Starter Rope 3\/16\" x 100\" (Size 6) – High-Tensile, Low-Stretch, Wear-Resistant Pull Cord","description":"\u003cstrong\u003eStens 146-927 is a 3\/16\" diameter, 100\" starter rope built from high-tensile, wear-resistant fiber that stays soft and resists stretching for reliable pull starts.\u003c\/strong\u003e\n\n\u003cp\u003eThis replacement starter rope is designed as a durable, ready-to-use option for outdoor power equipment and small engines where a dependable pull cord matters. Made from a material comparable to automotive seat-belt fiber, the line combines exceptional tensile strength with low elongation and a soft hand so it feeds smoothly through starters and pulleys without stiffening or fraying quickly. It ships at 100 inches length and requires no assembly—cut to fit or use as supplied.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this rope withstand repeated pulls and abrasion?\u003c\/h3\u003e\n\u003cp\u003eThe construction emphasizes high tensile strength and wear resistance, so it tolerates frequent use and contact with starter housings and edges. Low stretch reduces shock loading on your starter mechanism and prevents excessive recoil over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-tensile fiber resists snapping under load\u003c\/li\u003e\n  \u003cli\u003eWear-resistant surface reduces fraying at contact points\u003c\/li\u003e\n  \u003cli\u003eLow-stretch construction maintains consistent cord length\u003c\/li\u003e\n  \u003cli\u003eSoft, flexible feel eases winding and handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this size work for common small engines and repairs?\u003c\/h3\u003e\n\u003cp\u003eAt 3\/16\" (approximately 4.8 mm) diameter and 100\" (2.54 m) length, this starter rope suits many lawnmowers, tillers, trimmers, and other small-engine starter assemblies that call for medium-thin cord. It’s sold as a size 6 line—check your equipment’s rope diameter requirement before cutting or fitting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/16\" diameter matches many OEM starter specifications\u003c\/li\u003e\n  \u003cli\u003e100\" length provides extra material for custom routing or knots\u003c\/li\u003e\n  \u003cli\u003eSize 6 designation aligns with common replacement charts\u003c\/li\u003e\n  \u003cli\u003eNo assembly needed—trim and tie for immediate use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and customize this rope?\u003c\/h3\u003e\n\u003cp\u003eThe rope arrives ready-to-use and can be trimmed to the precise length for your engine’s starter pulley and handle. Its low stiffness and soft surface make splicing, whipping, or melting end knots straightforward, and the material tolerates common finishing techniques.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut cleanly to length with standard tools\u003c\/li\u003e\n  \u003cli\u003eSoft flexibility simplifies knots and splices\u003c\/li\u003e\n  \u003cli\u003eCompatible with melting or whipping to secure ends\u003c\/li\u003e\n  \u003cli\u003eExtra length allows routing and handle attachment adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat distinguishes this rope material from cheaper alternatives?\u003c\/h3\u003e\n\u003cp\u003eUnlike low-grade cords that can be brittle, fuzzy, or highly elastic, this product uses a high-performance fiber similar to those in automotive seat belts. That gives a combination of tensile strength, abrasion resistance, and low elongation uncommon in generic starter ropes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSeat-belt-grade fiber offers superior strength-to-size ratio\u003c\/li\u003e\n  \u003cli\u003eLower elongation reduces premature slack and recoil issues\u003c\/li\u003e\n  \u003cli\u003eCleaner surface resists fuzzing and improves pulley life\u003c\/li\u003e\n  \u003cli\u003eDurability increases interval between replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, small-engine hobbyists, and homeowners who need a reliable, easy-to-fit replacement starter cord will benefit from Stens 146-927. It’s ideal when you want a compact-diameter rope that still delivers high tensile performance, low stretch, and long wear life—especially where a soft, flexible feel makes installation and repeated pulls easier.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the rope dimensions and length?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The rope is 3\/16\" in diameter, labeled size 6, and 100 inches long.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut and finish the ends myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—its soft, low-stretch fiber trims cleanly and accepts melting, whipping, or knotting for secure ends.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56830415372628,"sku":"B004HSAAP6","price":55.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-starter-rope-front-packaging.jpg?v=1787004456"},{"product_id":"stens-replacement-deck-belt-265-936-5-8-x-57-3-8-direct-fit-for-52-in-61-in-john-deere-wright-decks-covered-v-belt","title":"Stens Replacement Deck Belt 265-936 5\/8 x 57 3\/8 — Direct-fit for 52 in \u0026 61 in John Deere \u0026 Wright decks, covered V-belt","description":"\u003cp\u003e\u003cstrong\u003eThis is a Stens OEM replacement deck belt (model 265-936) sized 5\/8\" x 57 3\/8\" that replaces John Deere TCU34215 and Wright Mfg. 71460065 for compatible 52\" and 61\" decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower’s deck belt is worn, glazed, cracked, or slipping, the Stens 265-936 provides a direct-fit replacement made in the U.S.A. Engineered as a covered deck belt, it restores reliable power transfer to cutting blades on select John Deere QuikTrak and Wright Mfg. models. Before ordering, verify the OEM number and measure your existing belt to confirm fit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models use this Stens 265-936 belt?\u003c\/h3\u003e\n\u003cp\u003eThis belt is designed for specific John Deere QuikTrak and Wright Mfg. machines fitted with 52\" or 61\" decks. Check model and serial references to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eJohn Deere: 652R, 652B, 652R EFI, 661R EFI QuikTrak with 52\" and 61\" decks\u003c\/li\u003e\n  \u003cli\u003eWright Mfg.: Stander ZK, Rapid-Hite\/Sentar Sport, Sport X (52\" deck)\u003c\/li\u003e\n  \u003cli\u003eWright Stander X models: serial numbers 53014 and higher (52\" deck)\u003c\/li\u003e\n  \u003cli\u003eWright Sport and Sentar Sport models: serial numbers 55864 and higher (52\" deck)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm this belt will fit my deck?\u003c\/h3\u003e\n\u003cp\u003eAlways compare the OEM number and the belt measurements before purchase. If your current belt displays TCU34215 or 71460065, or measures 5\/8\" wide by 57 3\/8\" long, the Stens 265-936 is a direct replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify OEM numbers: John Deere TCU34215, Wright 71460065\u003c\/li\u003e\n  \u003cli\u003eMeasure width: 5\/8\" (covered belt cross-section)\u003c\/li\u003e\n  \u003cli\u003eMeasure length: 57 3\/8\" (outside circumference)\u003c\/li\u003e\n  \u003cli\u003eConfirm deck size and mower model\/serial range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and performance details of this covered deck belt?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 265-936 is a covered V-style deck belt built for consistent engagement with pulleys and sheaves. Its covered design protects internal cords from debris and abrasion, improving service life compared with uncovered belts in deck applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBelt type: covered — resists grass, dirt, and moisture infiltration\u003c\/li\u003e\n  \u003cli\u003eWidth: 5\/8\" for correct groove engagement on specified pulleys\u003c\/li\u003e\n  \u003cli\u003eLength: 57 3\/8\" engineered for the pulley path of listed decks\u003c\/li\u003e\n  \u003cli\u003eManufactured in the U.S.A and packaged in a branded sleeve\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I replace my mower deck belt, and what are the installation tips?\u003c\/h3\u003e\n\u003cp\u003eReplace the belt if you see cracking, chunking, glazing, or if it slips under load. Installing a new belt on a clean, undamaged pulley set and following the machine’s routing diagram ensures smooth operation and longer belt life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSigns to replace: cracks, frayed edges, glazing, loss of tension\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and spindle bearings for wear before installing\u003c\/li\u003e\n  \u003cli\u003eFollow the mower’s belt routing diagram to avoid misrouting\u003c\/li\u003e\n  \u003cli\u003eUse proper tension and check operation under no-load and load conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this belt for? The Stens 265-936 is intended for owners, technicians, and maintenance teams working on John Deere 652\/661 QuikTrak mowers and compatible Wright Mfg. 52\" deck models who need a reliable, OEM-equivalent replacement. If you maintain a fleet of commercial or residential mowers and require a U.S.-made, covered deck belt that matches OEM numbers TCU34215 or 71460065, this part is a practical, drop-in option. Always confirm model, serial range, and belt measurements before ordering to ensure proper fit and function.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces: John Deere TCU34215, Wright Mfg. 71460065\u003c\/li\u003e\n  \u003cli\u003ePackaging Type: Branded Sleeve\u003c\/li\u003e\n  \u003cli\u003eMade In The U.S.A\u003c\/li\u003e\n  \u003cli\u003eBrand: Stens\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt replace John Deere TCU34215?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Stens 265-936 replaces John Deere TCU34215 and is sized 5\/8\" x 57 3\/8\".\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this belt fit a Wright 52\" deck Sport X?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits Wright Sport X 52\" decks when serial numbers meet the listed ranges; confirm serial before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56830415536468,"sku":"B004HSAAJW","price":53.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-belt-front-packaging_b353f0ca-fe4a-4f59-8fb4-5593f5765025.jpg?v=1787004464"},{"product_id":"stens-ignition-switch-430-950-3-position-6-terminal-5-8-mount-direct-fit-replacement-made-in-usa","title":"Stens Ignition Switch 430-950 — 3-Position 6-Terminal 5\/8\" Mount Direct-Fit Replacement, Made in USA","description":"\u003cp\u003e\u003cstrong\u003eThe Stens 430-950 is a direct-fit 3-position ignition switch designed to replace Briggs \u0026amp; Stratton 692318 and several OEM lawn mower and turf equipment switches, supplied with keys, nut, and lock washer.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower, utility vehicle, or turf machine needs a reliable replacement ignition switch, the Stens 430-950 offers a manufactured-in-the-USA solution built to match common OEM specifications. It fits a range of models from Briggs \u0026amp; Stratton, Toro, Ferris, Scag, and Wright Manufacturing and is made by Indak to industry-standard dimensions for straightforward installation. The switch features three positions, six terminals, a 5\/8\" mounting stem, and comes complete with keys and mounting hardware so you can swap it in without hunting for extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhich original part numbers and brands does this switch replace?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 430-950 is listed as a replacement for several OEM switches, making it a versatile option for technicians and owners servicing mixed fleets. It matches part numbers from multiple manufacturers and equals the electrical and mechanical layout of those originals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBriggs \u0026amp; Stratton: 692318\u003c\/li\u003e\n  \u003cli\u003eFerris: 5100021\u003c\/li\u003e\n  \u003cli\u003eScag: 48798\u003c\/li\u003e\n  \u003cli\u003eToro: 83-0020\u003c\/li\u003e\n  \u003cli\u003eWright Mfg.: 20420002 and 52420008\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know it will fit my machine?\u003c\/h3\u003e\n\u003cp\u003eFitment is determined by matching the OEM part number, mounting stem size, terminal count, and serial ranges where specified. Check your equipment’s parts list or the existing switch for these details before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting stem diameter: 5\/8\"\u003c\/li\u003e\n  \u003cli\u003eNumber of positions: 3\u003c\/li\u003e\n  \u003cli\u003eNumber of terminals: 6\u003c\/li\u003e\n  \u003cli\u003eConfirmed models: Toro Groundsmaster 3100; Wright Sport X and Stander series with listed serial ranges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and accessories are included, and what else will I need?\u003c\/h3\u003e\n\u003cp\u003eThe 430-950 ships with everything required to secure it into the dash and operate it immediately, so basic installation only needs simple hand tools. If you need a spare key or different key number, plan accordingly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: lock washer, nut, and a set of keys\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: wrench or socket set for 5\/8\" stem nut, basic screwdrivers\u003c\/li\u003e\n  \u003cli\u003eOptional: replacement ignition key 430-009 if you need a spare or different key code\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this switch durable and where is it made?\u003c\/h3\u003e\n\u003cp\u003eThe switch is manufactured by Indak and produced in the United States, built to meet typical durability expectations for outdoor power equipment controls. Its construction is intended for the vibration and environmental exposure common on mowers and turf units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Indak\u003c\/li\u003e\n  \u003cli\u003eCountry of origin: Made in the U.S.A.\u003c\/li\u003e\n  \u003cli\u003eDesign: ruggedized for outdoor equipment use and OEM-style electrical connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Stens 430-950 is aimed at equipment owners, fleet managers, and independent repair shops that need a reliable, OEM-compatible ignition switch for lawn mowers, utility vehicles, and turf equipment. Choose this switch if you require a direct replacement for Briggs \u0026amp; Stratton 692318 or equivalent parts from Toro, Ferris, Scag, or Wright Manufacturing and want a kit that includes keys and mounting hardware for immediate installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Stens 430-950 come with keys and mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes a set of keys, a lock washer, and a nut for immediate installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this switch fit my Briggs \u0026amp; Stratton 692318 application?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 430-950 is designed as a direct replacement for Briggs \u0026amp; Stratton 692318 and equivalent OEM numbers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56831167889748,"sku":"B001OKBISI","price":53.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-ignition-switch-front-view.jpg?v=1787012283"},{"product_id":"stens-345-102-mower-blade-22-1-4-commercial-hi-lift-oem-fit-for-simplicity-lth-1600-series-made-in-usa","title":"Stens 345-102 Mower Blade 22 1\/4\" — Commercial Hi‑Lift OEM-Fit for Simplicity LTH \u0026 1600 Series, Made in USA","description":"\u003cp\u003e\u003cstrong\u003eStens 345-102 is a 22 1\/4\" commercial hi‑lift replacement blade designed to match Simplicity LTH and 1600 Series mower decks and restore cutting performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Simplicity mower needs a like‑for‑like blade replacement, the Stens 345‑102 offers the correct length, hole pattern and thickness for many Simplicity part numbers. This listing is for one commercial hi‑lift blade packaged with a branded label; note that a 38\" deck requires one 345‑102 plus one 345‑106 to complete the set. Verify fitment against your tractor’s manual or existing blade before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exact specifications does this blade use?\u003c\/h3\u003e\n\u003cp\u003eThe 345‑102 is a hi‑lift mower blade sized for many Simplicity models. It is built to the OEM profile so it fits the specified machines and provides the intended airflow for bagging and side discharge operations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 22 1\/4\" (overall)\u003c\/li\u003e\n  \u003cli\u003eWidth: 2\"\u003c\/li\u003e\n  \u003cli\u003eCenter hole diameter: 3\/4\" (rounded center hole design)\u003c\/li\u003e\n  \u003cli\u003eOuter hole diameter: 3\/8\"\u003c\/li\u003e\n  \u003cli\u003eThickness: 0.203\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Simplicity models and part numbers will this replace?\u003c\/h3\u003e\n\u003cp\u003eThis Stens blade is manufactured to meet or exceed the OEM specifications and is listed as a direct replacement for numerous Simplicity part numbers. It aligns with the bolt pattern and dimensions used on those models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Simplicity: 1704101, 1704101A, 1704101ASM, 1704101BM, 1704101BMA\u003c\/li\u003e\n  \u003cli\u003eAlso replaces: 1704101BZ, 1704101SM, 1716695 series, and 71704101\u003c\/li\u003e\n  \u003cli\u003eReplacement fit: Simplicity LTH and 1600 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and combine blades for a 38\" deck?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires standard blade removal tools and safe lifting of the mower. For a 38\" deck the machine requires two different blades: one 345‑102 and one 345‑106; these two together restore the correct stagger and cutting width.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm you have the correct blade on each spindle before tightening\u003c\/li\u003e\n  \u003cli\u003eUse proper torque and locking hardware as specified by the tractor manufacturer\u003c\/li\u003e\n  \u003cli\u003eReplace blades in matched pairs when applicable to maintain balance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this blade built to commercial quality and where is it made?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 345‑102 is produced with commercial‑grade steel and a hi‑lift profile to support effective grass lift for bagging and clean discharge. The product is proudly made in the USA and packaged with a branded label for easy identification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommercial hi‑lift profile for stronger airflow\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet\/exceed OEM tolerances\u003c\/li\u003e\n  \u003cli\u003eBranded label packaging for part verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this blade is for: Owners and service professionals who maintain Simplicity LTH or 1600 series tractors and need an exact, durable replacement blade. Choose this Stens 345‑102 if you require OEM‑matching dimensions, commercial hi‑lift performance, and a U.S.‑manufactured part. Remember to check your mower’s deck size and order the companion 345‑106 when replacing blades on a 38\" deck to ensure correct coverage and balance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need another blade to replace a 38\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A 38\" deck requires one 345-102 plus one 345-106 to complete the set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this blade fit my Simplicity LTH model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your LTH lists any of the OEM numbers shown, the 345-102 matches the hole pattern and dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56831167922516,"sku":"B001OK9Y1G","price":69.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-345-102-front-view.jpg?v=1787012282"},{"product_id":"stens-rear-wheel-12-for-toro-22-recycler-205-268-black-1-2-bore-radial-tread","title":"Stens Rear Wheel 12\" for Toro 22\" Recycler – 205-268 Black, 1\/2\" Bore Radial Tread","description":"\u003cp\u003e\u003cstrong\u003eStens 205-268 is a direct-replacement black rear wheel designed to restore traction and stability on compatible Toro 22\" Recycler mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Toro mower's rear wheel is worn, cracked, or out of round, swapping in a Stens 205-268 brings back reliable rolling performance without the wait for an OEM part. This Stens wheel matches the key dimensions and hub fitment used on several Toro 22\" Recycler models, offering a cost-effective alternative that’s built to the same basic fit standards: 12\" diameter wheel, radial tread for even ground contact, a 1\/2\" bore, and a 1 3\/4\" hub to align with the mower’s axle.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Toro models will this Stens wheel fit?\u003c\/h3\u003e\n\u003cp\u003eThis wheel is made to replace Toro part 105-1816 and fits Toro 22\" Recycler models that used that part number. Confirm your model and manufacture year to ensure compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Toro 22\" Recycler: models 20012 and 20016 (years 2002–2005) and 20019.\u003c\/li\u003e\n  \u003cli\u003eDesigned as a direct substitute for Toro part 105-1816.\u003c\/li\u003e\n  \u003cli\u003eCheck your mower’s manual or existing wheel stamping for part verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the dimensions and bore\/hub specs compare to the original?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 205-268 mirrors the crucial measurements of the Toro wheel so it installs cleanly on axles built for the OEM part. Verifying bore and hub sizes prevents fitment problems and keeps the mower tracking true during use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWheel diameter: 12\" for the same ground clearance and handling as the original.\u003c\/li\u003e\n  \u003cli\u003eBore size: 1\/2\" to fit standard rear axle pins or shafts used on listed Toro models.\u003c\/li\u003e\n  \u003cli\u003eHub outer diameter: 1 3\/4\" to match the mower’s wheel mounting interface.\u003c\/li\u003e\n  \u003cli\u003eTread pattern: radial for even wear and predictable rolling resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or installation tips should I know?\u003c\/h3\u003e\n\u003cp\u003eReplacing a rear wheel is straightforward with basic tools: remove cotter pins, slide off the old wheel, and install the new Stens wheel in reverse order. Inspect surrounding hardware and bearings while the wheel is off to avoid repeat service shortly after replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse penetrating oil on stuck hardware and replace cotter pins when reassembling.\u003c\/li\u003e\n  \u003cli\u003eCheck wheel bearings and axle splines for wear; replace if damaged.\u003c\/li\u003e\n  \u003cli\u003eTorque fasteners to the mower manufacturer’s recommendations to prevent wobble.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Stens 205-268 rear wheel suits homeowners, landscapers, and repair shops swapping worn or damaged rear wheels on Toro 22\" Recycler models (20012, 20016, 20019) that originally used Toro part 105-1816. It’s targeted at anyone wanting a straightforward, dimension-matched replacement in black that restores safe rolling, maintains mower geometry, and keeps outdoor equipment in service with minimal downtime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this wheel a direct replacement for Toro part 105-1816?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Stens 205-268 is made to replace Toro 105-1816 and fit the specified Toro 22\" Recycler models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the bore and hub sizes on this wheel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The wheel has a 1\/2\" bore and a 1 3\/4\" hub, with a 12\" overall diameter.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56831169757524,"sku":"B004HSBKHS","price":71.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-205-268-front-packaging-view.jpg?v=1787012308"},{"product_id":"stens-replacement-drive-belt-for-cub-cadet-1-2-x-91-covered-belt-oem-fit-direct-replacement-for-954-05027a","title":"Stens replacement drive belt for Cub Cadet 1\/2\" x 91\" covered belt – OEM fit, direct replacement for 954-05027A","description":"\u003cp\u003e\u003cstrong\u003eStens 265-424 is a direct-fit covered drive belt engineered to replace Cub Cadet 954-05027A and restore reliable deck and transmission power.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower’s deck or transaxle is slipping, glazing, or showing frayed edges, this Stens OEM replacement belt is sized and finished to match original equipment performance. Made to the same dimensions as the factory belt, it installs easily and arrives in a branded sleeve so you can confirm part numbers before fitting. The covered construction helps resist belt dust and debris, while the U.S. manufacturing origin assures consistent quality control.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will this Stens belt fit?\u003c\/h3\u003e\n\u003cp\u003eThis belt is designed to replace several Cub Cadet and MTD part numbers, making it compatible with a range of residential riding mower models. Check your mower’s parts manual or existing belt label to match the listed OEM numbers. If your model is one of the XT1 or XT2 series listed, you’ll have a direct replacement without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Cub Cadet 754-05027, 754-05027A, 954-05027, 954-05027A\u003c\/li\u003e\n  \u003cli\u003eAlso replaces MTD parts with the same numbers\u003c\/li\u003e\n  \u003cli\u003eFits Cub Cadet XT1-GT50, XT1-GT54, XT2-GX54\u003c\/li\u003e\n  \u003cli\u003eIdeal for models requiring a covered 1\/2\" x 91\" drive belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the belt built and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThis is a covered drive belt with a 1\/2\" width and 91\" total length, matching OEM geometry for pulleys and routing. The cover layer protects the tensile cords from abrasion, reducing premature wear in dusty, grassy environments. Proper tensile strength and correct profile keep the belt tracking correctly and transferring power efficiently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovered belt design limits debris infiltration and wear\u003c\/li\u003e\n  \u003cli\u003e1\/2\" width maintains correct pulley contact\u003c\/li\u003e\n  \u003cli\u003e91\" length matches original routing without stretching\u003c\/li\u003e\n  \u003cli\u003eManufactured to OEM dimensional tolerances for fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know before installing this replacement belt?\u003c\/h3\u003e\n\u003cp\u003eBefore installing, park the mower on level ground, disconnect the spark plug, and refer to your operator’s manual for belt routing diagrams. Inspect idler pulleys, spindle bearings, and deck components for wear—replacing the belt alone may not fix issues caused by damaged hardware. Take care to route the belt exactly as the OEM belt was routed to avoid slippage or pulley interference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect power and follow safety procedures\u003c\/li\u003e\n  \u003cli\u003eCompare part numbers and belt length before fitting\u003c\/li\u003e\n  \u003cli\u003eCheck pulleys and tensioners for play or damage\u003c\/li\u003e\n  \u003cli\u003eFollow the mower’s belt routing diagram to install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this belt for? This Stens 265-424 replacement is for homeowners and technicians servicing Cub Cadet and compatible MTD riding mowers that require a 1\/2\" covered drive belt, especially XT1 and XT2 models listed. It’s suited for anyone who needs a precise OEM-equivalent part for consistent deck engagement and everyday yard work. If you want a ready-to-install belt built to the original dimensions and delivered with clear part identification, this Stens replacement is a practical, cost-effective option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this belt an exact OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Stens 265-424 matches the OEM size and replaces Cub Cadet 954-05027A and listed equivalents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt is a covered drive belt, 1\/2\" wide and 91\" long, designed for direct fit applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56831175983444,"sku":"B01HHOQX98","price":52.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-belt-front-packaging_21af255a-4c3d-4199-90b5-ce5e4775700c.jpg?v=1787012439"},{"product_id":"stens-recoil-starter-assembly-for-echo-trimmers-and-edgers-replacement-for-17720055931-direct-fit-pre-set-mounting","title":"Stens recoil starter assembly for Echo trimmers and edgers — replacement for 17720055931, direct-fit, pre-set mounting","description":"\u003cp\u003e\u003cstrong\u003eStens 150-535 is a direct-fit recoil starter assembly engineered to replace Echo part 17720055931 and restore reliable pull-start performance on compatible Echo trimmers and edgers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn or broken starter prevents your small engine from starting, swapping in a properly sized replacement makes the difference between hours of downtime and getting back to work. This Stens 150-535 recoil starter matches the original Echo mounting pattern and dimensions so you can reinstall quickly without modifying the housing or rope system.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Echo models will this starter assembly work with?\u003c\/h3\u003e\n\u003cp\u003eThis recoil assembly is designed to fit a wide range of Echo handheld models. It reproduces the factory mounting holes and dimensions to ensure a secure fit in the equipment housings listed by Echo.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Echo OEM: 17720055931\u003c\/li\u003e\n  \u003cli\u003eCompatible with: edr-260, gt-230, gt-231\u003c\/li\u003e\n  \u003cli\u003eAlso fits: hca-260, hca-261, pas-230\/231\/260\/261, pe-230\/231\/260\/261\u003c\/li\u003e\n  \u003cli\u003eFits additional models: ppt-230\/231\/260\/261, shc-260\/261, srm-230, srm-230S, srm-230U\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Stens 150-535 match the original Echo part?\u003c\/h3\u003e\n\u003cp\u003eThe unit mirrors the OEM starter’s key dimensions and mounting layout to deliver the same mechanical engagement and rope travel. That makes installation and interaction with the existing flywheel and housing consistent with factory behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 3 inches for correct stroke and rope movement\u003c\/li\u003e\n  \u003cli\u003eWidth: 3 1\/8 inches to align with Echo mounting points\u003c\/li\u003e\n  \u003cli\u003eHeight: 1 1\/2 inches to maintain proper clearance\u003c\/li\u003e\n  \u003cli\u003ePre-set housing pattern to drop into the original location\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and first use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with basic small-engine maintenance. You’ll remove the old starter, transfer any compatible hardware or rope, and secure the Stens unit in place; no case modifications are required when used on listed models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove old assembly and note rope routing before disassembly\u003c\/li\u003e\n  \u003cli\u003eTransfer existing screws or use supplied fasteners if included\u003c\/li\u003e\n  \u003cli\u003eTest pull tension and ensure smooth rewind before full reassembly\u003c\/li\u003e\n  \u003cli\u003eConfirm engagement with the flywheel on the first manual pulls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this part for? Landscapers, rental shops, or homeowners who maintain Echo handheld equipment and need a dependable, dimension-for-dimension replacement starter will find this part useful. It’s intended for anyone restoring reliable pull-start function on the listed Echo models without altering the engine housing. Use the Stens 150-535 when the original Echo starter is damaged, the rope refuses to rewind, or the pawls and spring no longer engage properly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace Echo part 17720055931?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Stens 150-535 is a direct replacement for Echo OEM 17720055931.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are any modifications needed to fit my Echo model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modifications are required when used on the listed Echo models; it uses the factory mounting pattern.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56831176048980,"sku":"B01G9Y50I2","price":55.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-recoil-starter-front-assembly.jpg?v=1787012422"},{"product_id":"stens-pto-switch-replacement-for-john-deere-am101562-fits-130-185-stx30-stx38-2-position-5-terminal","title":"Stens PTO Switch Replacement for John Deere AM101562 – Fits 130–185 \u0026 STX30\/STX38, 2-Position 5-Terminal","description":"\u003cstrong\u003eStens New PTO Switch is a direct-fit replacement for John Deere AM101562, restoring blade engagement on select 130–185 series and STX30\/STX38 lawn tractors.\u003c\/strong\u003e\n\n\u003cp\u003eThis heavy-duty PTO (power take-off) switch from Stens is engineered to match John Deere's AM101562 electrical and mechanical specifications so you can quickly replace a worn or faulty switch. It provides the same 2-position control and 5-terminal wiring arrangement found on original equipment, reducing troubleshooting and installation time. Manufactured in the USA, this replacement part is intended for homeowners and technicians who need a reliable, OEM-compatible control for mower blade engagement.\u003c\/p\u003e\n\n\u003ch3\u003eWill this switch fit my John Deere lawn tractor?\u003c\/h3\u003e\n\u003cp\u003eYes—this Stens unit is made to replace John Deere part number AM101562 and fits many common models. Confirm compatibility by checking your tractor model against the supported list and comparing the connector and mounting style to your original switch.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM John Deere AM101562\u003c\/li\u003e\n  \u003cli\u003eCompatible with most 130, 160, 165, 170, 175, 180, 185 series tractors\u003c\/li\u003e\n  \u003cli\u003eAlso fits STX30 and STX38 series lawn tractors\u003c\/li\u003e\n  \u003cli\u003eVerify 5-terminal wiring and 2-position layout before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Stens PTO switch perform electrically and mechanically?\u003c\/h3\u003e\n\u003cp\u003eThis switch duplicates the original ignition-type PTO control used by John Deere, offering predictable electrical connections and a durable switching mechanism. Its two positions allow standard engaged\/disengaged operation, while five terminals provide the necessary routing for safety interlocks and blade circuits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIgnition type: PTO (matches John Deere configuration)\u003c\/li\u003e\n  \u003cli\u003eNo. of positions: 2 for on\/off blade control\u003c\/li\u003e\n  \u003cli\u003eNo. of terminals: 5 to match OEM wiring harnesses\u003c\/li\u003e\n  \u003cli\u003eDesigned for straightforward replacement without rewiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a bolt-in and plug-in swap when the original switch has the same mounting and terminal arrangement. Basic hand tools and attention to the wiring harness connector are all that's usually required; always disconnect the battery first and follow safety steps listed in your tractor manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect battery before starting work\u003c\/li\u003e\n  \u003cli\u003eRemove bezel or dash panel to access the switch location\u003c\/li\u003e\n  \u003cli\u003eDisconnect the 5-terminal harness and note terminal positions\u003c\/li\u003e\n  \u003cli\u003eSecure new switch with original fasteners and reconnect harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose a Stens replacement instead of a used OEM part?\u003c\/h3\u003e\n\u003cp\u003eNew Stens switches are built to match OEM specifications while avoiding wear-related failures common in used components. Buying a new replacement reduces the risk of short circuits, intermittent engagement, or premature failure that can arise from age and corrosion on older parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew component with consistent electrical contacts\u003c\/li\u003e\n  \u003cli\u003eDesigned for reliable blade engagement and safety interlocks\u003c\/li\u003e\n  \u003cli\u003eBacked by Stens' quality manufacturing standards\u003c\/li\u003e\n  \u003cli\u003eMade in the USA for traceable production quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Stens PTO switch is ideal for homeowners, lawn-care professionals, and service technicians who own or repair John Deere 130–185 series and STX30\/STX38 lawn tractors and need a dependable, OEM-compatible replacement for part AM101562. If your mower has intermittent blade engagement, a broken switch knob, or electrical faults at the PTO control, this part offers a like-for-like swap to restore safe operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace John Deere part AM101562?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Stens PTO switch is a direct replacement for John Deere AM101562 and matches the OEM wiring and mounting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many terminals and positions does the switch have?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The switch has five terminals and two positions, matching the original PTO control configuration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56831182700884,"sku":"B07G7HHJJ4","price":53.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-pto-switch-front-view.jpg?v=1787012544"},{"product_id":"stens-replacement-drive-belt-for-cub-cadet-i1042-i1046-i1050-1-2-x-88-3-8-covered-oem-754-04134","title":"Stens Replacement Drive Belt for Cub Cadet I1042 I1046 I1050 - 1\/2\" x 88 3\/8\" Covered OEM 754-04134","description":"\u003cp\u003e\u003cstrong\u003eStens replacement drive belt 266-223 (fits OEM 754-04134 \/ 954-04134) restores reliable deck and drive power on most Cub Cadet I1042, I1046 and I1050 series riding mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn or broken belt sidelined your mower, swapping in a correctly sized, covered drive belt gets you back to cutting quickly. This Stens-made belt is manufactured in the USA to match the MTD and Cub Cadet OEM numbers and the dimensions needed for many I1042, I1046 and I1050 models. It’s built as a covered drive belt, 1\/2\" wide and 88 3\/8\" long, designed to handle the demands of deck and transmission routing used by these mower lines.\u003c\/p\u003e\n\n\u003ch3\u003eWill this belt fit my Cub Cadet I1046 mower?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility is determined by OEM number and the belt’s length and width. If your mower lists OEM 754-04134 or 954-04134, or the original belt measures roughly 1\/2\" wide and about 88 3\/8\" long, this Stens replacement will fit the I1046 and many related models.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM: MTD\/Cub Cadet\/Troy-Bilt 754-04134 and 954-04134\u003c\/li\u003e\n  \u003cli\u003eFits most Cub Cadet I1042, I1046 and I1050 series\u003c\/li\u003e\n  \u003cli\u003eBelt type: covered drive belt, Width: 1\/2\", Length: 88 3\/8\"\u003c\/li\u003e\n  \u003cli\u003eConfirm fit by matching OEM part number or measuring existing belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the Stens replacement belt compared with OEM parts?\u003c\/h3\u003e\n\n\u003cp\u003eStens designs replacement belts to match OEM form and function, built for consistent performance under mowing loads. Constructed as a covered drive belt, it resists wear from pulleys and contamination, giving dependable engagement and long service life when installed and routed correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCovered belt construction reduces abrasion and fraying\u003c\/li\u003e\n  \u003cli\u003eMeets original sizing to maintain proper pulley tracking\u003c\/li\u003e\n  \u003cli\u003eManufactured in the USA with quality control to OEM specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check during installation to ensure proper performance?\u003c\/h3\u003e\n\n\u003cp\u003eProper routing, pulley alignment and correct tension are essential for smooth operation and to prevent premature wear. Inspect pulleys for grooves or damage, clean any debris from guides, and follow the mower’s routing diagram so the belt tracks as intended.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eVerify pulley condition and replace damaged pulleys or idlers\u003c\/li\u003e\n  \u003cli\u003eFollow the mower’s belt routing diagram precisely\u003c\/li\u003e\n  \u003cli\u003eAdjust tension per manufacturer specs; avoid over-tightening\u003c\/li\u003e\n  \u003cli\u003eRecheck tracking after first few minutes of operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this belt for deck and transaxle applications?\u003c\/h3\u003e\n\n\u003cp\u003eThis belt is specified as a drive belt and matches the OEM numbers for decks and drive systems on the listed mower series. It is intended to replace the original drive belt(s) used in those routing arrangements; verify your mower’s service manual for the exact application before installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for drive applications compatible with OEM listings\u003c\/li\u003e\n  \u003cli\u003eCheck manual to confirm deck vs. transaxle routing for your model\u003c\/li\u003e\n  \u003cli\u003eUse appropriate part number if your mower has multiple belt types\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Stens 266-223 replacement belt is for homeowners, landscapers and repair technicians who own or service Cub Cadet I1042, I1046 or I1050 series mowers and need a reliable, OEM-matching drive belt. It suits anyone replacing a worn or broken belt who wants a USA-manufactured covered drive belt that matches the 754-04134 \/ 954-04134 part numbers and the exact 1\/2\" by 88 3\/8\" specification for proper fit and performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt replace OEM 754-04134?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Stens 266-223 replaces MTD\/Cub Cadet\/Troy-Bilt OEM 754-04134 and 954-04134.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Covered drive belt, width 1\/2\" and length 88 3\/8\"—match these to your original belt.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56831183913300,"sku":"B07KMDDV25","price":54.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-front-packaging-belt_16360a2f-1601-4e56-bdf9-a2c18ca2dfdc.jpg?v=1787012563"},{"product_id":"stens-replacement-drive-wheel-for-toro-super-recycler-8x2-00-gray-hub-1-2-bore-42-tooth-1-3-4-offset","title":"Stens replacement drive wheel for Toro Super Recycler 8x2.00 Gray hub 1\/2\" bore, 42-tooth, 1-3\/4\" offset","description":"\u003cp\u003e\u003cstrong\u003eStens Drive Wheel 205-718 is a direct-fit replacement for Toro Super Recycler models using OEM part 107-3709, restoring drive engagement and wheel geometry with an 8 x 2.00 plastic wheel and a 1\/2\" bore.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Toro Super Recycler lawn mower is slipping, losing drive power, or showing uneven wheel rotation, this Stens replacement drive wheel is built to match the OEM fit and function. Engineered to the same dimensions as Toro part 107-3709, the 205-718 drive wheel offers a gray hub, a 42-tooth gear profile, and a 1 3\/4\" hub offset to align correctly with mower drive components. It’s a straightforward swap that helps bring worn or damaged wheels back to reliable performance without expensive OEM pricing.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this wheel fit my Toro Super Recycler?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 205-718 is manufactured to match the critical dimensions of Toro part 107-3709 so it installs like the original. Verify your existing wheel’s bore and offset before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Toro OEM number 107-3709\u003c\/li\u003e\n  \u003cli\u003eBore size: 1\/2\" to match your mower axle\u003c\/li\u003e\n  \u003cli\u003eHub offset: 1 3\/4\" for correct clearance and alignment\u003c\/li\u003e\n  \u003cli\u003eWheel size: 8 x 2.00 for consistent ground contact\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat material and drivetrain details should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis replacement wheel is molded from durable plastic engineered for lawn mower use and integrates a 42-tooth gear to mesh with the Super Recycler drive system. The gray hub is designed for fit, while the plastic tread balances durability and cost-effectiveness for light-to-moderate yard work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: impact-resistant plastic selected for mower applications\u003c\/li\u003e\n  \u003cli\u003e42 gear teeth for proper engagement with mower drive components\u003c\/li\u003e\n  \u003cli\u003eGray hub color for visual match with many Toro units\u003c\/li\u003e\n  \u003cli\u003eBalanced tread size for traction and ease of rolling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstalling the Stens drive wheel is typically a simple mechanical replacement that most DIYers can complete with basic hand tools. Remove the old wheel, check the axle and retaining hardware, then slide the new wheel onto the axle and secure it per your mower’s service instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: wrench or socket set, pliers, and possibly a screwdriver\u003c\/li\u003e\n  \u003cli\u003eCheck axle and keyway for wear before installing\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer torque or retainer guidelines when securing\u003c\/li\u003e\n  \u003cli\u003eNo special calibration required after replace if sizes match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I confirm this is the correct replacement part?\u003c\/h3\u003e\n\u003cp\u003eConfirm compatibility by comparing your current wheel’s OEM number, bore size, hub offset, and overall wheel diameter with the Stens 205-718 specifications. If your mower lists Toro 107-3709 as the OEM part, this Stens part is designed to be a compatible alternative.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM reference: Toro 107-3709\u003c\/li\u003e\n  \u003cli\u003eCompare bore: 1\/2\" and hub offset: 1 3\/4\"\u003c\/li\u003e\n  \u003cli\u003eWheel dimensions: 8 x 2.00 ensure same ground contact\u003c\/li\u003e\n  \u003cli\u003eConsult your mower manual or parts diagram if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Stens 205-718 drive wheel is for homeowners, landscapers, and small engine technicians who need an affordable, accurate replacement for worn or damaged Toro Super Recycler wheels. If you value a part that matches OEM dimensions, restores drive engagement, and is straightforward to install with common tools, this wheel is a practical choice to keep your mower running smoothly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this Stens wheel replace Toro part 107-3709?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Stens 205-718 is manufactured to replace Toro OEM 107-3709 with matching bore, offset, and wheel size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the key dimensions I should check before buying?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Confirm wheel size 8x2.00, bore 1\/2\", and hub offset 1 3\/4\" to ensure fitment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56832207487316,"sku":"B07KMDSG76","price":66.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-drive-wheel-front-view_d8009482-c5b0-4cfe-bc01-3dfb0e55db83.jpg?v=1787024800"},{"product_id":"stens-high-wheel-lawn-mower-wheel-14-1-2-bore-1-3-4-hub-compatible-with-craftsman-husqvarna-direct-fit-replacement","title":"Stens High Wheel lawn mower wheel 14\" (1\/2\" bore, 1 3\/4\" hub) compatible with Craftsman\/Husqvarna - direct-fit replacement","description":"\u003cp\u003e\u003cstrong\u003eThe Stens High Wheel 205-450 is a direct-fit 14\" replacement lawn mower wheel (1\/2\" bore, 1 3\/4\" hub) compatible with Craftsman and Husqvarna models using OEM 532189159.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower has worn, cracked, or unstable rear wheels, swapping in a correctly sized replacement restores ride height, traction, and safe handling. This Stens wheel is engineered to match the dimensional specs of common OEM parts so it fits a wide range of Craftsman and Husqvarna push mowers and some walk-behind models. Before ordering, confirm the hub, bore, and outer diameter measurements on your machine to ensure a proper match.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models will this Stens wheel fit?\u003c\/h3\u003e\n\u003cp\u003eThis wheel replaces part number 532189159 and fits many Craftsman and Husqvarna machines that list that OEM. It’s listed as compatible with numerous Craftsman part numbers and several AYP\/Husqvarna OEM references. Use the hub and bore dimensions to double-check fitment on older or less common models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OEMs: Craftsman 532189159; Husqvarna\/AYP references 532188808, 532189159.\u003c\/li\u003e\n  \u003cli\u003eDirect replacements for many Craftsman part numbers such as 917378921, 917387490, 917379100, and more.\u003c\/li\u003e\n  \u003cli\u003eConfirm: 14\" outer diameter, 1\/2\" bore, 1 3\/4\" hub for correct fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Stens high wheel restore mower performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn wheel removes wobble, improves tracking, and re-establishes the intended cutting height and clearance. The correct bore and hub dimensions keep the wheel secure on the axle, preventing slippage or uneven wear. Installing a properly sized wheel helps maintain safe steering and reduces stress on the mower deck and spindle assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStable ride: correct hub and bore keep wheel centered on the axle.\u003c\/li\u003e\n  \u003cli\u003eConsistent mowing height: 14\" diameter restores original deck clearance.\u003c\/li\u003e\n  \u003cli\u003eDurability: replacement removes cracked or deformed OEM wheels that cause failures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key measurements and physical features to check?\u003c\/h3\u003e\n\u003cp\u003eThis Stens High Wheel has three critical dimensions you should verify before purchase: outer diameter (OD), bore size, and hub diameter. Matching these numbers to your mower ensures the wheel will slide on the axle and engage any retaining hardware correctly. Also check that the wheel width and mounting face clear nearby frame components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOuter diameter (OD): 14\" for correct ground clearance and gear ratios.\u003c\/li\u003e\n  \u003cli\u003eBore size: 1\/2\" to match standard axle or bushing diameters.\u003c\/li\u003e\n  \u003cli\u003eHub diameter: 1 3\/4\" to fit the mower’s mounting recess or hub plate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what hardware might I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for anyone comfortable removing a rear wheel from a push mower using basic hand tools. Depending on your mower, you may need retaining clips, washers, or a new cotter pin—items sometimes reused but best replaced if corroded. If your axle uses a bushing, verify that the wheel seats properly against it for smooth rotation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: socket or wrench set, pliers, and possibly a hammer or punch for stubborn pins.\u003c\/li\u003e\n  \u003cli\u003eHardware: check axle clip, washer, cotter pin, or retention nut condition.\u003c\/li\u003e\n  \u003cli\u003eTip: lift and secure mower before removing the wheel for safe access.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this replacement wheel for? Lawn care DIYers, small-engine repair shops, and homeowners who maintain Craftsman or Husqvarna push mowers and need a reliable, OEM-dimension replacement wheel. Choose this Stens High Wheel 205-450 when your mower lists OEM 532189159 (or compatible AYP\/Craftsman numbers) and you require the exact 14\" diameter, 1\/2\" bore, and 1 3\/4\" hub dimensions. Always verify part fitment against your mower’s specifications to ensure correct installation and performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this wheel a direct replacement for Craftsman 532189159?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Stens High Wheel matches the 532189159 dimensions: 14\" OD, 1\/2\" bore, 1 3\/4\" hub for direct fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools are needed to install the replacement wheel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools like a wrench or socket set and pliers. You may also need a new cotter pin or retaining clip.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56832282263892,"sku":"B07T16QZP2","price":75.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-high-wheel-front-view.jpg?v=1787026233"},{"product_id":"stens-18-notched-air-lift-mower-blade-3-4-center-oem-fit-for-troy-bilt-wide-cut-decks","title":"Stens 18\" Notched Air-Lift Mower Blade — 3\/4\" Center, OEM Fit for Troy-Bilt Wide-Cut Decks","description":"\u003cp\u003e\u003cstrong\u003eStens 310-540 is an 18\" notched air-lift mower blade engineered to fit specific Troy-Bilt wide-cut decks and restore reliable cutting and debris evacuation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Troy-Bilt wide-cut mower needs a replacement blade that matches factory fit and lift characteristics, the Stens 310-540 notched air-lift blade is sized and drilled to the same specs as the original equipment. The blade combines a notched tip and an air-lift profile to support even grass flow into the deck discharge while maintaining deck balance and durability. Below you’ll find clear answers about fitment, installation, performance, and whether this blade suits your mower and mowing style.\u003c\/p\u003e\n\n\u003ch3\u003eWill this blade fit my Troy-Bilt wide-cut mower?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 310-540 is designed to replace Troy-Bilt part 1910917 and fits the listed wide-cut models directly. Confirm your deck width and spindle hole size before ordering to ensure correct mounting and clearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Troy-Bilt 34087, 34087C, 34089, 34089C, 34342, 34343\u003c\/li\u003e\n  \u003cli\u003eDeck fit: fits wide-cut decks—requires two blades for a 33\" deck\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 3\/4\" diameter center hole for direct spindle attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the notched air-lift design affect cutting and clippings?\u003c\/h3\u003e\n\u003cp\u003eThe notched air-lift profile increases airflow under the deck so clippings evacuate more consistently to the discharge chute, reducing clumping and improving spread. The notch helps reduce resistance at the tip, which supports efficient rotation and maintains a steady lift across the blade span.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAir-lift profile promotes consistent grass lift for an even cut\u003c\/li\u003e\n  \u003cli\u003eNotched tips help reduce clumping and encourage cleaner discharge\u003c\/li\u003e\n  \u003cli\u003eHelps maintain airflow for mulching or side-discharge setups when applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical specifications and material details?\u003c\/h3\u003e\n\u003cp\u003eThe blade measures 18 inches long and 2 inches wide, with a thickness of 0.209 inches for robust durability. The stamped center hole is 3\/4 inch to match the original Troy-Bilt spindle, and the blade is built to OEM-style tolerances for balanced rotation and longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 18\"; Width: 2\"; Thickness: .209\"\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 3\/4\" for proper spindle fit\u003c\/li\u003e\n  \u003cli\u003eReplaces Troy-Bilt part number 1910917 for direct swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the blade safely?\u003c\/h3\u003e\n\u003cp\u003eInstall by parking the mower on level ground, removing the key, and supporting the deck. Match blade orientation and torque the mounting bolt to the mower manufacturer’s specification; check balance and retorque after initial use. Periodic sharpening and inspection will extend blade life and preserve cut quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafety: disconnect spark plug and stabilize mower before service\u003c\/li\u003e\n  \u003cli\u003eInstallation: align 3\/4\" center hole and torque per mower manual\u003c\/li\u003e\n  \u003cli\u003eMaintenance: sharpen as needed and replace if bent or excessively worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Stens 310-540 notched air-lift blade is intended for owners of compatible Troy-Bilt wide-cut mowers who want a direct-fit replacement with OEM-style airflow characteristics. It’s a good choice for homeowners and landscapers seeking consistent discharge performance, straightforward installation, and a durable blade that matches the original part number 1910917. If you run a 33\" deck, remember to order two blades for full coverage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does one blade cover a 33\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. A 33\" deck requires two Stens 310-540 blades for full deck coverage and balanced cutting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this blade identical to Troy-Bilt 1910917?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Stens 310-540 is a direct replacement for Troy-Bilt part 1910917 with matching hole and dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56832286654804,"sku":"B000BP6BPW","price":48.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-310-540-front-view-blade.jpg?v=1787026330"},{"product_id":"stens-starter-rope-3-16-diameter-100-ft-size-6-white-stretch-cord-for-small-engine-recoil-starters","title":"Stens Starter Rope 3\/16\" Diameter 100 ft — Size 6 White Stretch Cord for Small Engine Recoil Starters","description":"\u003cstrong\u003eStens 146-068 is a German-made 3\/16\" diameter, 100-foot stretch starter rope (size 6) designed to replace or rewind recoil starter cords on small engines.\u003c\/strong\u003e\n\n\u003cp\u003eThis heavy-duty starter rope from Stens fits a variety of light-duty motorized equipment including leaf engines, weed wackers, pull-behind tillers, compactors, and manual edgers. Manufactured by an OEM supplier in Germany, the cord combines consistent diameter, controlled stretch, and long length to give you enough material for custom cuts, knots, and splicing when repairing or rebuilding recoil starter assemblies.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this rope will fit my recoil starter?\u003c\/h3\u003e\n\u003cp\u003eMeasure the diameter of your existing starter cord and compare the overall length you need for spools or starter pulleys. This Stens rope is 3\/16\" (approximately 4.8 mm) in diameter and supplied as a continuous 100-foot length so you can cut multiple replacement sections or customize for different machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDiameter: 3\/16\" (size 6) — matches many small-engine starters\u003c\/li\u003e\n  \u003cli\u003eLength: 100 feet — ample for several repairs or replacements\u003c\/li\u003e\n  \u003cli\u003eVerify knot and stopper size on your pulley before trimming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and steps are recommended for installing this starter cord?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically requires basic hand tools and a steady approach: remove the starter housing, unwind the old cord, thread the new rope through the pulley and starter grip, tie secure knots, and rewind the spring to the correct tension. Use a lighter or heat source briefly to fuse synthetic ends, and check that the cord runs freely without binding before final assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: pliers, screwdriver, lighter, tape measure\u003c\/li\u003e\n  \u003cli\u003eTip: melt ends slightly to prevent fraying after cut\u003c\/li\u003e\n  \u003cli\u003eSafety: release spring tension slowly to avoid injury\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat equipment and situations is this rope best suited for?\u003c\/h3\u003e\n\u003cp\u003eThis cord is intended for small outdoor power tools and light machinery with pull-start systems such as trimmers, portable tillers, drag harrows, and compactors. Its balanced stretch and tensile strength make it useful where a clean, reliable pull is needed but excessive stiffness would hinder rewind on the pulley.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon uses: weed wackers, leaf engines, mini mowers, edgers\u003c\/li\u003e\n  \u003cli\u003eGood for rebuilds, splicing, multi-repair kits from one spool\u003c\/li\u003e\n  \u003cli\u003eNot intended for heavy industrial winching or lifting applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the Stens starter rope?\u003c\/h3\u003e\n\u003cp\u003eMade by an OEM supplier in Germany, the Stens 146-068 starter rope is built to resist abrasion and repeated recoil pulls but will eventually wear like any cord under heavy use. Proper installation, correct knotting, and avoiding sharp edges in the starter housing will extend service life and maintain safe, consistent operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction: OEM-quality cord engineered for recoil starters\u003c\/li\u003e\n  \u003cli\u003eMaintenance: inspect periodically for fraying or wear\u003c\/li\u003e\n  \u003cli\u003eReplacement suggestion: swap when fibers show significant abrasion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: If you repair small engines, maintain lawn and garden equipment, or keep a garage toolkit for seasonal fixes, the Stens 146-068 3\/16\" x 100' starter rope gives you an economical, OEM-grade spool to handle multiple repairs. It’s ideal for DIY mechanics, landscapers, rental shops, and anyone who prefers supplying their own replacement cord with room to customize length, knot type, and end finishes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Stens 146-068 rope pre-cut or one continuous length?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It ships as one continuous 100-foot length so you can cut multiple replacement pieces to size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this rope for a string trimmer recoil starter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your trimmer requires a 3\/16\" (size 6) starter cord; measure your original rope to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56832319979860,"sku":"B001OK4H1I","price":50.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-starter-rope-front-package.jpg?v=1787027007"},{"product_id":"stens-flat-idler-for-dixie-chopper-30224-4-75-od-1-2-bore-metal-replacement-for-42-72-decks","title":"Stens Flat Idler for Dixie Chopper 30224 — 4.75\" OD, 1\/2\" Bore Metal Replacement for 42\"–72\" Decks","description":"\u003cp\u003e\u003cstrong\u003eThe Stens 280-850 is a heavy-duty metal flat idler designed to replace Dixie Chopper part 30224 and restore reliable deck belt tracking on 42\"–72\" mower decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn or damaged idler leaves your deck belt slipping, misaligned, or noisy, installing a correctly sized replacement is the fastest way to bring cutting performance back to spec. This Stens flat idler matches the original equipment dimensions and fits several Dixie Chopper decks, offering a robust metal construction and OEM-equivalent fit for professional and homeowner mowers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this idler match my Dixie Chopper deck?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 280-850 reproduces the key dimensions of the factory part so it installs and functions like the original. Confirming measurements before purchase prevents fitment issues and ensures belt alignment and tension are restored.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOuter diameter (A): 4 3\/4\" (4.75\")\u003c\/li\u003e\n  \u003cli\u003eWorking diameter (B): 4\"\u003c\/li\u003e\n  \u003cli\u003eInner diameter \/ bore (C): 1\/2\"\u003c\/li\u003e\n  \u003cli\u003eThickness (D): 3\/4\"; Height (V): 1 1\/4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich models and OEM numbers does it replace?\u003c\/h3\u003e\n\u003cp\u003eThis idler is listed as a direct replacement for common OEM references, making it suitable when your parts diagram calls out those numbers. Use the OEM cross-reference and your deck size to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Dixie Chopper part number 30224\u003c\/li\u003e\n  \u003cli\u003eAlso cross-referenced to Bad Boy part 033-6001-00\u003c\/li\u003e\n  \u003cli\u003eCompatible with Dixie Chopper 42\", 50\", 60\" and 72\" decks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe Stens 280-850 is fabricated from metal and built for heavy-duty use, so it resists deformation and holds up under the loads typical of commercial-style mower decks. Reliable construction reduces downtime and the need for frequent replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid metal idler body for strength and heat resistance\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand belt tension and deck vibration\u003c\/li\u003e\n  \u003cli\u003eGenuine Stens packaging signals OEM-quality replacement parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I verify this part fits my mower before ordering?\u003c\/h3\u003e\n\u003cp\u003eMeasure the existing idler and compare it to the Stens specifications, or consult your deck parts diagram for the listed OEM number. Confirming the 1\/2\" bore and 4 3\/4\" outer diameter is particularly important for a correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck bore size: 1\/2\" (ID)\u003c\/li\u003e\n  \u003cli\u003eCheck overall diameter: 4 3\/4\" (OD) and working diameter 4\"\u003c\/li\u003e\n  \u003cli\u003eMatch OEM number 30224 or deck size (42\"–72\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Stens 280-850 flat idler is aimed at landscapers, municipal crews, and serious homeowners who need a dependable replacement idler for Dixie Chopper decks. If you maintain 42\" to 72\" cutting decks and want a heavy-duty metal idler that mirrors OEM dimensions, this part provides a straightforward swap with durable, dealer-trusted quality. Always verify dimensions or OEM cross-reference before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this idler fit a Dixie Chopper 60\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Stens 280-850 replaces Dixie Chopper 30224 and is compatible with 42\", 50\", 60\", and 72\" decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the inner bore size of this idler?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The idler has a 1\/2\" inner diameter (bore); verify your shaft size before installing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Stens","offers":[{"title":"Default Title","offer_id":56832334168404,"sku":"B001OK8QV0","price":50.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/stens-flat-idler-front-view_7a860471-a76f-4f83-936e-02fff936054b.jpg?v=1787027327"}],"url":"https:\/\/gardenluxe.co.uk\/collections\/brand-stens.oembed","provider":"Gardenluxe Uk","version":"1.0","type":"link"}