{"title":"Hipa","description":"\u003cp\u003eBrowse our full Hipa range. Every order ships free across the UK, with free 30-day returns as standard.\u003c\/p\u003e","products":[{"product_id":"hipa-courage-replacement-carburetor-for-kohler-18-19-20-hp-engines-20-853-33-s-kit-with-gaskets-filters","title":"Hipa Courage Replacement Carburetor for Kohler 18\/19\/20 HP Engines — 20 853 33-S Kit with Gaskets \u0026 Filters","description":"\u003cp\u003e\u003cstrong\u003eHipa Courage 20 carburetor replacement kit is a complete drop-in replacement for Kohler Courage 18–22 HP engines that arrives pre-tuned and ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your lawn tractor or mower with a Kohler Courage engine is running rough, flooding, or refusing to start, a worn or clogged carburetor is a common cause — and this Hipa kit is built to match OEM fit and function for several Kohler part numbers. The kit replaces 20 853 33-S (and equivalent numbers) and includes gaskets, filters, plugs, and hardware so you can restore fuel delivery and avoid multiple small parts orders.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Kohler engines and part numbers does this replace?\u003c\/h3\u003e\n\u003cp\u003eThis Hipa carburetor is designed to fit a broad range of Courage-series Kohler engines and to directly replace multiple legacy part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Kohler Courage 20, 19 and 18 HP engines and related models.\u003c\/li\u003e\n  \u003cli\u003eSpecifically replaces 20 853 33-S, 20-853-33-S, 20-853-16-S, 20-853-14-S, KH 2085316-S and 2085314S.\u003c\/li\u003e\n  \u003cli\u003eWorks with engine codes often found on small tractors and mowers (SV600, SV590, SV540 series).\u003c\/li\u003e\n  \u003cli\u003eAlso fits equipment from Cub Cadet and Toro models that use the same carburetor footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the kit packaged and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eHipa supplies this carburetor as an all-in-one repair kit so you won’t need to source multiple components after purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMain Hipa 20 853 33-S carburetor x1 — fully assembled and tuned at the factory.\u003c\/li\u003e\n  \u003cli\u003eComplete gasket set for mounting and mating surfaces to prevent leaks.\u003c\/li\u003e\n  \u003cli\u003eAir filter and pre-filter to protect intake air cleanliness.\u003c\/li\u003e\n  \u003cli\u003eTwo fuel filters, an oil filter, and two spark plugs to refresh engine consumables during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key technical specs and materials I should know?\u003c\/h3\u003e\n\u003cp\u003eThe Hipa unit is built to withstand heat and fuel exposure while maintaining reliable metering and spray characteristics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting hole center-to-center: 52 mm to match Kohler mounting patterns.\u003c\/li\u003e\n  \u003cli\u003eThrottle bore diameter: 26 mm; choke bore: 32 mm; venturi: 24 mm for correct airflow.\u003c\/li\u003e\n  \u003cli\u003eFuel inlet line diameter: 7.5 mm to fit standard fuel hose sizes.\u003c\/li\u003e\n  \u003cli\u003eConstruction uses brass jets, a zinc-plated float bowl, a high-density plastic float, and an anodized aluminum body for corrosion resistance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I need to adjust or tune anything after install?\u003c\/h3\u003e\n\u003cp\u003eThe carburetor ships factory-tuned and wet-flow tested to simulate engine conditions, minimizing post-install adjustments for most installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory tuning reduces initial setup — most users can install and start immediately.\u003c\/li\u003e\n  \u003cli\u003eWet flow testing ensures consistent fuel delivery and spray pattern under simulated load.\u003c\/li\u003e\n  \u003cli\u003eMinor idle or mixture tweaks may be required for machines with aftermarket exhausts, air cleaners, or altitude changes.\u003c\/li\u003e\n  \u003cli\u003eAll mounting gaskets and filters included to streamline the service process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hipa Courage 20 carburetor kit is aimed at DIY owners and small-engine mechanics working on Kohler Courage-series lawn tractors and mowers, plus compatible Cub Cadet and Toro models. If you want an OEM-fit replacement that arrives ready-to-run, includes consumable service parts, and matches the original carburetor’s mounting and bore dimensions, this kit saves time and avoids multiple part orders.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor plug-and-play into my Kohler Courage engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s a direct-replacement for listed part numbers and mounts to the same 52mm pattern; minor tuning rarely needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What consumables are included in the Hipa carburetor kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes gaskets, air and pre-filters, two fuel filters, an oil filter, and two spark plugs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56818316902740,"sku":"B0BHHXXRNF","price":65.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-carburetor-front-view.jpg?v=1786960136"},{"product_id":"hipa-mulching-blade-set-for-honda-21-mowers-vh7-fit-alloy-steel-pair-for-finer-clippings","title":"Hipa Mulching Blade Set for Honda 21\" Mowers — VH7 Fit, Alloy-Steel Pair for Finer Clippings","description":"\u003cp\u003e\u003cstrong\u003eHipa 08720-VH7-000 is a pair of alloy-steel mulching blades designed to replace the factory blades on compatible 21-inch Honda walk-behind mowers and convert ordinary cutting into efficient mulching.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want to upgrade your 21-inch Honda mower for finer clippings, reduced bagging and a more even return of organic matter to your lawn, these Hipa mulching blades match the mounting patterns and cutting profile for a range of GCV160, HRX217 and HRR2169 models. Built from hardened alloy steel and finished for corrosion resistance, the set includes the two specific blade types that together recreate the mulching action inside the deck. Before ordering, check the blade part numbers and mounting hole pattern from your mower to ensure a correct fit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Honda models will these Hipa blades fit?\u003c\/h3\u003e\n\u003cp\u003eThese blades are intended as replacements for many 21-inch Honda walk-behind mowers that use the VH7-series blade mounting. Fitment covers a variety of HRX, HRR and HR models that share the same blade interface, but compatibility can vary by production year and deck configuration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Honda models using 21\" decks and VH7-style mounting.\u003c\/li\u003e\n  \u003cli\u003eCommonly fits GCV160, HRX217, HRR2169 and HRX537 model families.\u003c\/li\u003e\n  \u003cli\u003eIncludes the two-piece blade set that mirrors factory mulching geometry.\u003c\/li\u003e\n  \u003cli\u003eAlways match your mower’s blade MPN and hole pattern before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do Hipa mulching blades improve lawn clippings?\u003c\/h3\u003e\n\u003cp\u003eMulching blades are shaped to lift, chop and recirculate grass clippings inside the deck until they are reduced to small particles that fall back onto the turf. This returns nutrients and reduces the need for bagging, leaving the lawn looking cleaner while helping soil health through natural recycling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-lift profile creates airflow to keep clippings under the deck for extended cutting.\u003c\/li\u003e\n  \u003cli\u003eReduced clipping size accelerates breakdown and improves distribution across the lawn.\u003c\/li\u003e\n  \u003cli\u003eMinimizes trips to empty a catcher or rake clippings after mowing.\u003c\/li\u003e\n  \u003cli\u003eWorks best when grass is not overgrown—regular mowing yields optimal results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and safety features are built into the blades?\u003c\/h3\u003e\n\u003cp\u003eHipa mulching blades are forged from alloy steel with added elements such as chromium and molybdenum to enhance strength, wear resistance and corrosion protection. A painted edge finish guards against surface rust and reduces sharp-metal contact during installation, though the coating will wear with use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy-steel construction for durability and longer edge life.\u003c\/li\u003e\n  \u003cli\u003ePainted edges to slow rusting and protect hands during handling.\u003c\/li\u003e\n  \u003cli\u003eInspect blades regularly for cracks, looseness or excessive wear.\u003c\/li\u003e\n  \u003cli\u003eAlways install and remove blades wearing thick gloves and follow mower manufacturer torque specs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I confirm I’m ordering the correct Hipa replacement blades?\u003c\/h3\u003e\n\u003cp\u003eBlade fitment can differ even within the same model line across production years. Verify the part numbers stamped on your current blades or consult your mower’s manual to confirm mounting hole pattern and blade MPN before ordering to avoid mismatches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare your mower’s existing blade part numbers to 72511-VH7-000 and 72531-VH7-000.\u003c\/li\u003e\n  \u003cli\u003eCheck the circle-style mounting hole and blade orientation in your deck.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, remove one blade and photograph the mounting pattern for verification.\u003c\/li\u003e\n  \u003cli\u003eContact Hipa or a trusted parts dealer with model year and deck type for help.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Homeowners and property caretakers who own a compatible 21-inch Honda walk-behind mower and want to switch to efficient mulching without buying a new mower. Ideal for people who prefer less bagging, want to return nutrients to their lawn, and are comfortable verifying blade fit and performing safe blade changes with gloves and basic tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these Hipa blades fit my Honda HRX217 mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many HRX217 models that use the VH7-style mounting, but verify your blade MPN and mounting hole pattern before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mulch with these blades instead of bagging clippings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these blades are shaped to chop clippings fine and redistribute them, reducing the need to bag grass under normal mowing conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56823708057940,"sku":"B0FYBXJYF3","price":76.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-mulching-blade-front-view.jpg?v=1786977958"},{"product_id":"hipa-carburetor-kit-for-john-deere-lt-166-16hp-vanguard-engines-direct-fit-replacement-with-spark-plug-fuel-filters","title":"Hipa Carburetor Kit for John Deere LT-166 16HP Vanguard Engines — Direct-Fit Replacement with Spark Plug \u0026 Fuel Filters","description":"\u003cp\u003e\u003cstrong\u003eHipa’s complete carburetor kit replaces several OEM units to restore fuel delivery for John Deere LT-166 and compatible 16HP Vanguard engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your lawn tractor or walk-behind mower with a 16HP Vanguard or similar small engine is running rough, hard to start, or stalling, a worn or clogged carburetor is often the cause. This Hipa kit is designed as a direct-fit replacement for multiple part numbers (including 847395, 808725, 846280, 846944 and several 3507xx series parts) and arrives with the small components needed to get the engine running again without multiple trips to the hardware store.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and OEM numbers does this Hipa carburetor kit work with?\u003c\/h3\u003e\n\u003cp\u003eThe kit targets 16HP Vanguard engines and many Briggs \u0026amp; Stratton\/B\u0026amp;S type small engines used in John Deere LT-166 mowers and walk-behinds. It’s intended to replace a range of legacy OEM numbers so you can match part references quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirectly replaces OEM numbers like 847395, 808725, 846280, 846944 and related 350772–350777 series.\u003c\/li\u003e\n  \u003cli\u003eCompatible with JD LT-166 and other machines using 16HP Vanguard powerplants.\u003c\/li\u003e\n  \u003cli\u003eAlso fits several walk-behind mower applications referencing BS 5418F and associated part codes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and why they matter?\u003c\/h3\u003e\n\u003cp\u003eThe Hipa kit includes the core carburetor plus small consumable parts that are commonly worn or missing, so you won’t need to source gaskets, filters, or spark parts separately. That reduces downtime and simplifies installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 complete replacement carburetor tuned to the listed engine families.\u003c\/li\u003e\n  \u003cli\u003e1 spark plug to refresh ignition timing and improve starting.\u003c\/li\u003e\n  \u003cli\u003e1 fuel line, 2 gaskets, and 2 inline fuel filters to stop leaks and block debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools or steps are typical?\u003c\/h3\u003e\n\u003cp\u003eInstallation is approachable for a home mechanic with basic hand tools. Typical steps include draining the fuel, removing the old carburetor, transferring linkage, fitting new gaskets and filters, then adjusting idle and choke per engine manual guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic tools: wrenches, screwdrivers, pliers and a torque wrench for secure fasteners.\u003c\/li\u003e\n  \u003cli\u003eTypical time: about 30–90 minutes depending on access and experience.\u003c\/li\u003e\n  \u003cli\u003eFollow the engine or mower manual for idle\/choke adjustments and torque specs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit improve performance and what should I expect after replacement?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failing carburetor and worn consumables usually restores steady idling, stronger throttle response, and easier starting. Results depend on overall engine condition and correct installation and adjustment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExpect smoother starts and fewer stalls when components are installed correctly.\u003c\/li\u003e\n  \u003cli\u003eCombining the kit with fresh fuel and a clean air filter yields best outcomes.\u003c\/li\u003e\n  \u003cli\u003eIf problems persist, inspect ignition, compression, and fuel delivery lines for other faults.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Hipa carburetor kit is aimed at DIY lawn equipment owners, small engine repair shops, and maintenance teams who need a one-package replacement for a range of John Deere LT-166 and 16HP Vanguard-compatible engines. Choose this kit if you want a direct-fit carburetor plus replacement spark, fuel line, gaskets, and filters to bring a tired mower or walk-behind back to reliable service without sourcing multiple parts separately.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit John Deere LT-166 model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed to replace multiple OEM carburetors used on John Deere LT-166 with 16HP Vanguard engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are installation parts included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes carburetor, spark plug, fuel line, two gaskets, and two fuel filters for a complete install.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56825123963220,"sku":"B0DMSLLNDT","price":63.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-carburetor-front-view_098fbae4-67a2-4c0a-9eb6-80b60ea1c974.jpg?v=1786989792"},{"product_id":"hipa-54-medium-lift-mulching-mower-blades-3-pack-5-point-star-fit-for-z254-z254f-alloy-steel-coated","title":"Hipa 54\" Medium-Lift Mulching Mower Blades 3-Pack — 5-Point Star Fit for Z254\/Z254F, Alloy Steel Coated","description":"\u003cp\u003e\u003cstrong\u003eHipa 187256 is a 3-pack of 54\" medium-lift, 5-point-star mulching mower blades engineered to replace worn blades on compatible Husqvarna zero-turn and lawn tractor decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement blades are designed for 54-inch decks that use the 5-point star mounting pattern and provide a balance between grass lift and mulching performance. Built from alloy steel and finished with a protective paint coating, they resist wear and rust and are intended to chop clippings finely for redistribution back onto the turf. Before ordering, confirm your mower's blade mounting configuration and part number to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models work with these Hipa 187256 blades?\u003c\/h3\u003e\n\u003cp\u003eThese blades fit many Husqvarna and similar-brand 54\" deck machines that use the 5-point star mounting hole. They are intended as direct replacements when the machine’s OEM part numbers match or are listed among compatible references.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: Z254, Z254F, MZ54, MZ54S, RZ5424, RZ5426 series with 54\" decks.\u003c\/li\u003e\n  \u003cli\u003eAlso fits select YTH, GTH, LGT, LSZ, GT and RZ54i models with matching mounting pattern.\u003c\/li\u003e\n  \u003cli\u003eCross-references: OEM numbers such as 187256, 532187256, 187254, 532187254, PP24007, 595-605.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these medium-lift mulching blades affect cutting and clippings?\u003c\/h3\u003e\n\u003cp\u003eMedium-lift blades balance upward airflow and cutting power to lift grass for an even cut while creating finer clippings than standard high-lift blades. The toothed mulching profile reduces clump formation and helps recycle nutrients back into the lawn without bagging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulching design chops clippings into smaller pieces for quicker breakdown.\u003c\/li\u003e\n  \u003cli\u003eMedium lift prevents excessive thatch suction while maintaining a clean cut.\u003c\/li\u003e\n  \u003cli\u003ePainted edges reduce early rusting and protect hands during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction features improve durability?\u003c\/h3\u003e\n\u003cp\u003eThe blades are manufactured from alloy steel with elements like chromium and molybdenum added to high-carbon steel for improved strength and wear resistance. A durable paint finish helps shield the cutting edge from surface corrosion and reduces initial friction during mowing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy steel core for impact resistance and longer edge life.\u003c\/li\u003e\n  \u003cli\u003eProtective coating on edges to slow rust until the blade bed-in period.\u003c\/li\u003e\n  \u003cli\u003eStamped 5-point star mounting hole for a secure fit on compatible spindles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before replacing mower blades?\u003c\/h3\u003e\n\u003cp\u003eConfirm the blade mounting hole pattern and compare the part number to your owner’s manual or the blade currently installed. Always inspect blades for cracks, bends, or excessive wear and use proper safety gear during replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify your deck is 54\" and uses a 5-point-star mounting configuration.\u003c\/li\u003e\n  \u003cli\u003eMatch the MPN (187256, 532187256, etc.) to avoid incorrect fitment.\u003c\/li\u003e\n  \u003cli\u003eWear thick gloves and torque bolts to manufacturer spec when installing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners and landscapers who own 54\" zero-turn mowers or garden tractors that require a toothed, medium-lift mulching blade with a 5-point star mount. These Hipa blades suit users who want an affordable, durable replacement that improves clipping dispersion and reduces cleanup time while recycling nutrients back into the lawn.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades fit any 54-inch mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit 54\" decks that use the 5-point star mounting pattern. Confirm your mower’s blade mounting type and part number before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these blades good for mulching and bagging?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for mulching, they finely chop clippings for redistribution; they can also be used for bagging if your mower supports it.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56830304387412,"sku":"B0FYD2HSCQ","price":80.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-packaging-54in-blades.jpg?v=1787003364"},{"product_id":"hipa-mulching-blades-for-cub-cadet-42-inch-decks-2-pack-toothed-high-lift-21-25in","title":"Hipa Mulching Blades for Cub Cadet 42-inch Decks, 2-Pack — Toothed High-Lift 21.25in","description":"\u003cstrong\u003eHipa 942-04308 mulching blades are a 2-pack of toothed, high-lift replacement blades engineered to mulch, bag, or side-discharge for 42-inch Cub Cadet and compatible riding mowers.\u003c\/strong\u003e\n\nThese Hipa blades match OEM part numbers such as 942-04308, 942-0616, 742-0616 and others, and are sized specifically for 42-inch decks. Built with a curved, toothed edge and high-lift profile, each blade measures 21-1\/4\" (540 mm) in length with a 1-1\/8\" (28 mm) air lift, 2-3\/8\" (60 mm) width and 5\/32\" (4 mm) thickness. The center hole uses a six-point star (5\/8\") shape to fit the spindle hardware on many Cub Cadet and Troy-Bilt tractors.\n\n\u003ch3\u003eWill these blades fit my Cub Cadet or Troy-Bilt 42\" mower?\u003c\/h3\u003e\n\u003cp\u003eYes — these Hipa mulching blades are designed for a wide range of 42-inch deck models. They are compatible with many Cub Cadet and Troy-Bilt tractors that accept the OEM 942-04308 family of part numbers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible Cub Cadet models: XT1-LT42, XT1-LT42C, XT1-LT42 KH, XT2-LX42 series, LTX1040, LTX1042KW, ZT1-42 KH.\u003c\/li\u003e\n\u003cli\u003eCompatible Troy-Bilt models: TB42 series, Pony 42X, Horse 42 Hydro, Mustang Z42 and similar 42\" decks.\u003c\/li\u003e\n\u003cli\u003eCenter hole: 6-point star (5\/8\") to match factory spindles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these blades improve mulching, bagging, or side discharge?\u003c\/h3\u003e\n\u003cp\u003eThe toothed, curved profile is built to lift and circulate clippings for finer particle size and more consistent discharge. The high-lift section increases airflow through the deck, improving bag fill and helping power through thicker or longer grass.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eToothed 3-in-1 design supports mulching, bagging, and side discharge.\u003c\/li\u003e\n\u003cli\u003eCurved blade edge produces smaller clippings for quicker breakdown.\u003c\/li\u003e\n\u003cli\u003eHigh-lift profile increases bagging capacity—manufacturer notes up to ~50% improvement over low-lift designs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the blade dimensions and construction details?\u003c\/h3\u003e\n\u003cp\u003eEach blade measures 21-1\/4\" (540 mm) end-to-end, with a working width of 2-3\/8\" (60 mm) and material thickness of 5\/32\" (4 mm). The raised air-lift is 1-1\/8\" (28 mm), optimized for circulation in 42-inch decks. Cutting edges are painted to inhibit rust and protect hands during handling; paint will wear off with normal use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 21-1\/4\" (540 mm); width: 2-3\/8\" (60 mm); thickness: 5\/32\" (4 mm).\u003c\/li\u003e\n\u003cli\u003eAir lift: 1-1\/8\" (28 mm) for improved airflow and bagging.\u003c\/li\u003e\n\u003cli\u003eCenter mounting: 6-point star (5\/8\") hole to match standard spindles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what should I expect during installation?\u003c\/h3\u003e\n\u003cp\u003eThe package contains two Hipa mulching blades, enough to replace both blades on a single 42-inch deck that uses two blades. The cutting edges are pre-painted for corrosion protection and safer handling; the paint will gradually wear as you mow. Use factory torque specs and a proper wrench; replace blades in matched pairs when possible for balanced performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded: two Hipa 942-04308-style mulching blades.\u003c\/li\u003e\n\u003cli\u003ePre-painted edges protect from rust and reduce handling nicks during installation.\u003c\/li\u003e\n\u003cli\u003eInstall using manufacturer-recommended bolts and torque settings; balance blades if required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThese Hipa mulching blades are intended for owners of 42-inch Cub Cadet, Troy-Bilt, and similarly configured lawn tractors who want a robust 3-in-1 blade for mulching, bagging, and side discharge. Choose this set if you need an OEM-replacement fit with a high-lift toothed profile for improved clipping circulation, or if you maintain overgrown turf where a more aggressive blade edge helps finish the job. Maintain factory safety practices when swapping blades and verify fit with your model's part number list before installation.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades fit a Cub Cadet XT1-LT42?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These Hipa blades match OEM 942-04308-type fitments for XT1-LT42 42-inch decks with a 6-point star (5\/8\") center hole.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many blades are included and are they pre-treated?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes two blades. Cutting edges are painted to resist rust and protect hands during installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56830619943252,"sku":"B0DJSRBYKM","price":76.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-blades-front-view-packaging.jpg?v=1787006453"},{"product_id":"hipa-095-2-4-mm-round-twist-trimmer-line-spool-5-lb-1889-ft-orange-heavy-duty-nylon-quieter-cutting","title":"Hipa .095\" (2.4 mm) Round-Twist Trimmer Line Spool — 5 lb \/ 1889 ft Orange, Heavy-Duty Nylon, Quieter Cutting","description":"\u003cp\u003e\u003cstrong\u003eHipa .095\" round-twist trimmer line is a heavy-duty, nylon weed-eater spool (5 lb \/ 1889 ft) designed for longer life, sharper cutting and broad compatibility when soaked 24 hours before use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis commercial-grade trimmer line uses a round-twist profile and high-tenacity nylon to deliver faster cutting, improved toughness and quieter operation compared with conventional lines. The spool contains 1889 feet of bright orange .095-inch (2.4 mm) string—enough for multiple refills—and fits most standard trimmer heads from top brands. For best performance, the manufacturer recommends hydrating the line for 24 hours before loading to increase elasticity and reduce breakage.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the round-twist shape improve cutting?\u003c\/h3\u003e\n\u003cp\u003eThe round-twist geometry concentrates sharper edges along the profile so each pass slices through vegetation instead of tearing. That design increases cutting efficiency and helps finish jobs faster with fewer passes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50% improved cutting action vs common shapes, per product testing\u003c\/li\u003e\n  \u003cli\u003eSharp edges reduce the need for multiple passes\u003c\/li\u003e\n  \u003cli\u003eWorks well on mixed grasses, weeds and light brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy should I soak the line for 24 hours before use?\u003c\/h3\u003e\n\u003cp\u003eSoaking hydrates the nylon and restores flexibility lost during packaging and shipping. A more elastic line resists cracking and feeds more smoothly from the spool, lowering breakage and downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSoak fully wrapped spool in water for 24 hours before loading\u003c\/li\u003e\n  \u003cli\u003eHydration increases elasticity and reduces snapping under load\u003c\/li\u003e\n  \u003cli\u003eSimple prep step that extends usable life and performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this spool fit my trimmer head and what brands are compatible?\u003c\/h3\u003e\n\u003cp\u003eThe Hipa .095\" line is sized to work with most standard trimmer heads that accept 2.4 mm (095-inch) string. It is intentionally packaged to suit common consumer and professional machines so you can refill without special adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many major brands: Husqvarna, Ryobi, Black+Decker, Craftsman, Stihl, Makita, Greenworks, Echo and others\u003c\/li\u003e\n  \u003cli\u003eCheck your machine’s manual for 0.095\"\/2.4 mm line compatibility\u003c\/li\u003e\n  \u003cli\u003eSpool length provides multiple reloads for frequent users\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and quiet is this weed eater string during regular use?\u003c\/h3\u003e\n\u003cp\u003eMade from high-temperature-resistant nylon, the Hipa round-twist line resists wear and cracking to deliver longer spool life. The balanced shape and material also reduce vibration and audible harshness versus some irregular profiles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUp to 35% longer lifespan under normal conditions\u003c\/li\u003e\n  \u003cli\u003eWear-resistant nylon reduces shredding and frequent replacement\u003c\/li\u003e\n  \u003cli\u003eRound-twist helps lower operational noise and fuel demand on gas trimmers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Hipa’s .095\" 5-pound spool is aimed at homeowners with large yards, landscape professionals and rental fleets that need bulk supply, consistent feed, and durable performance. If you service mixed lawn areas, border edges, or jobs requiring multiple reloads, the long orange spool plus a simple 24-hour soak step delivers efficient, reliable trimming without specialty spools or frequent repurchases.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I have to soak the Hipa trimmer line before using it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—soak the wrapped spool in water for 24 hours to increase elasticity and reduce breakage during use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this .095\" line fit my trimmer head?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits most standard heads that accept 0.095\"\/2.4 mm line; check your trimmer manual if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56830796857684,"sku":"B0CQC356X9","price":80.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-packaging-spool.jpg?v=1787007971"},{"product_id":"hipa-alternator-592831-10a-dual-circuit-replacement-for-cub-cadet-toro-lx-series-direct-fit","title":"Hipa Alternator 592831 10A Dual-Circuit Replacement for Cub Cadet \u0026 Toro LX Series - Direct Fit","description":"\u003cp\u003e\u003cstrong\u003eHipa's 592831 alternator is a direct-fit, 10-amp dual-circuit replacement designed to restore charging to compatible Cub Cadet and Toro lawn tractors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your garden tractor's battery isn't charging or lights are dim while the engine runs, a worn alternator is often the cause. This Hipa unit replaces a long list of OEM numbers and fits many Cub Cadet CC and Toro\/To-ro LX series models, making it a practical repair part when you need dependable electrical output for ignition, lights, and battery maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models and part numbers does this alternator work with?\u003c\/h3\u003e\n\u003cp\u003eThe Hipa 592831 alternator is made to match multiple original equipment references and fits a wide range of Cub Cadet and Toro\/To-ro lawn tractors. It maps to many older and current part numbers so you can cross-reference your OEM code before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacements: 592831, 696459, 691063, 393800, 391735, 393474, 390185, 390671, 390693, 391222, 391520.\u003c\/li\u003e\n  \u003cli\u003eFits Cub Cadet models: CC760, 933E, 933R, 1002, 1030, 1106, 1208, 1238, 130, 800.\u003c\/li\u003e\n  \u003cli\u003eFits Toro\/To-ro models: LX426, LX466 and many service part numbers beginning with 55xxx, 57xxx, 71xxx, 30xxx series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much electrical output and what circuit type does this alternator provide?\u003c\/h3\u003e\n\u003cp\u003eThis replacement is a 10 amp regulated alternator configured as a dual-circuit unit, providing separate outputs for battery charging and accessory loads. The regulated design keeps voltage within safe limits to protect the battery and onboard electronics under normal operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated output: 10 amperes suitable for battery maintenance and lights.\u003c\/li\u003e\n  \u003cli\u003eDual-circuit: isolates accessory and battery charging paths for reliable performance.\u003c\/li\u003e\n  \u003cli\u003eInternal regulation: reduces risk of overcharging and excessive voltage spikes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying to ensure a correct fit?\u003c\/h3\u003e\n\u003cp\u003eAlways compare the original alternator's mounting pattern, electrical connector configuration, and OEM part number with this listing. Measure bracket spacing and verify terminal types—differences in plugs or bolt locations can prevent a proper swap even if numbers appear similar.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your mower's model and serial number against the compatible models list.\u003c\/li\u003e\n  \u003cli\u003eCompare the original alternator's part number to those listed here.\u003c\/li\u003e\n  \u003cli\u003eInspect mounting points and connector style on your current unit before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are typically required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic small-engine repairs. You generally need common hand tools to unbolt the old unit, transfer any brackets or spacers, and reconnect the wiring; no specialty tools are typically required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: socket set, wrench set, screwdrivers, and optionally a service manual for torque specs.\u003c\/li\u003e\n  \u003cli\u003eProcedure: disconnect battery, remove drive belt, swap alternator, reconnect wiring, and test charging.\u003c\/li\u003e\n  \u003cli\u003eService tip: mark wiring or take photos before disconnecting to ensure correct reassembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Hipa alternator suits DIY homeowners, lawn care professionals, and small-engine repair shops needing a reliable, cost-effective replacement for worn or failed alternators on compatible Cub Cadet and Toro\/To-ro tractors. It's ideal when you want to restore charging capability and electrical function without sourcing scarce OEM parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this alternator a direct replacement for part 592831?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it replaces 592831 and several related OEM numbers; confirm your original part number before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this alternator charge my tractor battery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it's a regulated 10A dual-circuit alternator intended to maintain the battery and run lights\/accessories.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56830835229012,"sku":"B08Q4FFNXW","price":56.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-alternator-front-view.jpg?v=1787008259"},{"product_id":"hipa-0-095-2-4-mm-heavy-duty-trimmer-line-5-lb-spool-round-profile-for-reduced-vibration-and-longer-life","title":"Hipa 0.095\" (2.4 mm) Heavy-Duty Trimmer Line — 5 lb Spool, Round Profile for Reduced Vibration and Longer Life","description":"\u003cp\u003e\u003cstrong\u003eHipa 0.095\" (2.4 mm) heavy-duty round trimmer line is a commercial-grade, 5-pound spool of durable nylon string designed to cut thicker weeds and handle light commercial trimming tasks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 5-pound supply of Hipa .095-inch trimmer line combines a beefier diameter with a round, aerodynamic profile for steadier cutting and longer service life. Made from a bi-component nylon blend, it’s engineered to resist breakage and minimize vibration while fitting most gas and electric trimmers. The spool is intended for landscapers and homeowners who need a reliable, high-capacity line that performs across a wide range of trimmer models.\u003c\/p\u003e\n\n\u003ch3\u003eWhat machines will this 0.095\" trimmer line fit?\u003c\/h3\u003e\n\u003cp\u003eThe Hipa .095\" line is built to be broadly compatible with common string trimmers and brushcutters. It fits many gas and electric heads where 0.095\" diameter is supported, and works with universal bump-feed or fixed-line spool systems. Always check your trimmer manual for recommended diameters to ensure safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Echo SRM225, SRM210, SRM230 series\u003c\/li\u003e\n  \u003cli\u003eWorks with Stihl FS38, FS55R, FS80, FS85 models\u003c\/li\u003e\n  \u003cli\u003eFits Husqvarna 128LD, 223L and many Troy-Bilt or generic electric units\u003c\/li\u003e\n  \u003cli\u003eSuitable for most commercial and homeowner trimmers that accept .095\" line\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the heavy-duty round shape affect cutting and control?\u003c\/h3\u003e\n\u003cp\u003eThe round profile reduces air drag and line flutter, producing a steadier cut and lower vibration at operating speed. That steadiness helps keep the line on target for cleaner first-pass cuts and reduces operator fatigue over extended use. The thicker 2.4 mm core gives the string more resistance to snapping when striking stubborn vegetation or light debris.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRound twist geometry for smoother airflow and reduced flutter\u003c\/li\u003e\n  \u003cli\u003eLess vibration for improved operator comfort and accuracy\u003c\/li\u003e\n  \u003cli\u003e.095\" thickness provides stronger impact resistance than thinner lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the Hipa line and how long will it last?\u003c\/h3\u003e\n\u003cp\u003eHipa’s two-component nylon formulation is designed for extended wear compared with basic single-resin lines. It resists fraying and premature breakage during edging, trimming, and normal contact with stones or fences. While life depends on conditions and usage, the construction aims to deliver consistently longer runtime between reloads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommercial-grade nylon resins for enhanced tear resistance\u003c\/li\u003e\n  \u003cli\u003eEngineered for sustained performance under professional workloads\u003c\/li\u003e\n  \u003cli\u003eUp to about 15% longer runtime versus some conventional lines thanks to optimized aerodynamics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how do I install it?\u003c\/h3\u003e\n\u003cp\u003eThis listing provides a five-pound spool of Hipa .095\" round trimmer line and includes a cutting tool where noted for easier line preparation. Installation follows standard spool-loading steps for your trimmer head—measure, cut, wind, and secure per the tool manufacturer’s instructions. Keep the operator manual handy for any model-specific cautions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5-pound bulk spool of 2.4 mm \/ .095\" black trimmer line\u003c\/li\u003e\n  \u003cli\u003eIncludes a cutting tool to help prepare lengths quickly\u003c\/li\u003e\n  \u003cli\u003eEasy to wind into bump-feed or fixed-line trimmer heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Landscape professionals, rental fleets, and serious homeowners who need a heavy-duty supply of trimmer line will benefit most from Hipa’s 5 lb .095\" spool. It’s a practical pick when you want fewer reloads, tougher line for thicker weeds and edging, and broad compatibility with popular trimmer brands like Echo, Stihl, Husqvarna, Troy-Bilt, and many electric models.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this 0.095\" line safe for my Stihl or Echo trimmer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits many Stihl and Echo models that accept .095\" line; confirm your trimmer's recommended diameter first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much runtime does the 5-pound spool provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Runtime varies by use, but a 5 lb spool provides significantly more cuts and fewer reloads than smaller consumer packs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56830891655508,"sku":"B0BJPM1QKZ","price":80.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-packaging-5lb-spool.jpg?v=1787009083"},{"product_id":"hipa-chainsaw-chain-3-pack-for-stihl-ms271-ms290-18-325-pitch-063-gauge-74-dl-full-chisel-low-kickback","title":"Hipa Chainsaw Chain 3‑Pack for Stihl MS271\/MS290 18\" .325\" Pitch .063\" Gauge — 74 DL, Full‑Chisel Low‑Kickback","description":"\u003cp\u003e\u003cstrong\u003eHipa 3PCS replacement chains for Stihl-compatible bars: 18\" .325\" pitch, .063\" gauge, 74 drive links — full-chisel cutters with a low-kickback, perforated design and protective oil coating.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese three ready-to-install saw chains are built to fit Stihl models such as MS271, MS290, MS291 and MS311 (part references 3639 005 0074, V74). Each chain arrives heat-treated at rivets, surface-coated to resist rust, and uses perforated plates to reduce heat buildup and wear. The full-chisel cutter geometry gives fast, consistent cutting while the low-kickback profile improves operator control and extends guide bar life. Packaged for quick swapouts, this 3-pack keeps you working through multiple jobs without hunting for compatible replacement links.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these chains improve cutting consistency?\u003c\/h3\u003e\n\u003cp\u003eThe full-chisel cutter teeth are shaped for aggressive, efficient wood removal, helping maintain steady feed and predictable stroke times. Heat-treated rivets and precision stamping ensure each tooth stays aligned, reducing wobble and chatter during cuts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-chisel cutter profile for fast material removal\u003c\/li\u003e\n  \u003cli\u003ePrecision stamping for uniform tooth alignment\u003c\/li\u003e\n  \u003cli\u003eHeat-treated rivets to resist loosening under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these chains work on my Stihl saw and guide bar?\u003c\/h3\u003e\n\u003cp\u003eYes — each chain is sized to 18\" bars with a .325\" pitch and .063\" gauge and contains 74 drive links, matching OEM specifications for several Stihl models. Check your owner’s manual or the stamped information on your bar for pitch, gauge and drive-link count to confirm fit before installing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Stihl MS271, MS290, MS291, MS311\u003c\/li\u003e\n  \u003cli\u003eMatches part numbers 3639 005 0074 and V74\u003c\/li\u003e\n  \u003cli\u003eDesigned for 18\" guide bars with .325\" pitch, .063\" gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the perforated, low-kickback design affect safety and longevity?\u003c\/h3\u003e\n\u003cp\u003ePerforated drive and reverse plates promote airflow and reduce local heat from friction, which slows material fatigue and pin wear. The low-kickback profile lowers the severity of kickback events and distributes impact forces more evenly across the chain for smoother operation and less abnormal bar wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePerforations reduce heat and friction at plates and pins\u003c\/li\u003e\n  \u003cli\u003eLow-kickback profile reduces sudden rebound energy\u003c\/li\u003e\n  \u003cli\u003eEven force distribution extends guide bar and chain life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow ready-to-use are these chains out of the box?\u003c\/h3\u003e\n\u003cp\u003eEach chain arrives coated in a protective oil finish to prevent rust during storage and transit; rivets are pre-quenched for immediate strength. That means you can mount and tension the chain, add bar oil, and start cutting without an initial break-in or additional treatments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProtective oil coating prevents surface corrosion\u003c\/li\u003e\n  \u003cli\u003eHeat-treated, quenched rivets resist breakage during first use\u003c\/li\u003e\n  \u003cli\u003eShips ready for installation—ideal for rapid replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 3-pack from Hipa is suited for professional arborists, landscapers, and homeowners who own compatible Stihl machines and need multiple quality spare chains on hand. It’s particularly useful for those who want aggressive cutting performance with improved control and reduced maintenance downtime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What Stihl models are these chains compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Stihl MS271, MS290, MS291, MS311 and bars requiring 18\" .325\" pitch .063\" gauge with 74 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the chains arrive ready to use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — chains are heat-treated at rivets and come with a protective oil coating for immediate installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56830963745108,"sku":"B0FT37FC4N","price":72.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-packaging-3pcs-chains.jpg?v=1787009954"},{"product_id":"hipa-20-chainsaw-chain-3-pack-for-echo-cs-490-325-pitch-050-gauge-78-dl","title":"Hipa 20\" Chainsaw Chain 3-Pack for Echo CS-490 — .325\" Pitch, .050\" Gauge, 78 DL","description":"\u003cp\u003e\u003cstrong\u003eHipa 3PCS 20\" replacement chains designed to fit Echo CS-490 and similar models, featuring .325\" pitch, .050\" gauge, and 78 drive links for immediate installation and improved durability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Hipa chains are built as direct-fit replacements for popular gas chainsaws such as Echo CS-490 and compatible Craftsman models. Each chain arrives with a protective oil coating, heat-treated rivets, and a perforated drive\/reverse plate layout that helps dissipate heat and reduce wear. Sold in a pack of three, they are intended for users who want reliable cutting performance and fewer interruptions for chain changes.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these chains improve heat management and wear resistance?\u003c\/h3\u003e\n\u003cp\u003eThe chains use perforated drive plates and reverse plates to increase airflow around the chain, which helps move heat away from pins and plates during heavy cutting. Combined with surface coating and heat-treated rivets, this construction reduces metal softening and extends service life under demanding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePerforated plates increase airflow and heat dissipation.\u003c\/li\u003e\n  \u003cli\u003eProtective oil coating guards against rust and corrosion.\u003c\/li\u003e\n  \u003cli\u003eQuenched rivets resist breakage and maintain chain tension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these chains fit my Echo CS-490 or Craftsman saw?\u003c\/h3\u003e\n\u003cp\u003eYes — the Hipa chains are specifically sized to match Echo CS-490 and CS-440 models and a number of Craftsman saws. Verify your saw’s chain specifications: 20\" bar length, .325\" pitch, .050\" gauge, and 78 drive links to ensure a correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Echo CS-490 and CS-440 saws.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Craftsman S205, CMXGSAMY462S, PP4620AVX where specs match.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part numbers such as 20BPX78CQ and M78.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance for these replacement chains?\u003c\/h3\u003e\n\u003cp\u003eChains arrive ready to install thanks to the protective oil film and pre-treated rivets; you’ll only need to mount and tension them per your saw manual. Routine maintenance follows standard chainsaw practice: proper tensioning, lubrication, and periodic sharpening to keep cutting performance consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShipped with protective oil—install immediately after unpacking.\u003c\/li\u003e\n  \u003cli\u003eStandard tensioning and bar\/chain lubrication recommended.\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters as needed to retain cutting efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat cutting performance can I expect from these full-chisel cutters?\u003c\/h3\u003e\n\u003cp\u003eThe full-chisel cutter geometry provides aggressive, fast cutting suitable for general-purpose felling and limbing. While offering higher productivity, full-chisel chains require careful maintenance and are best used on clean wood to avoid premature dulling from dirt or debris.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-chisel cutters deliver quick, efficient cuts through solid wood.\u003c\/li\u003e\n  \u003cli\u003eBest used on clean, seasoned wood to preserve sharpness.\u003c\/li\u003e\n  \u003cli\u003ePerforated design helps stabilize cutting performance under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hipa 3-pack is aimed at homeowners, landscapers, and professional users who run Echo CS-490\/CS-440 or compatible Craftsman saws and seek cost-effective spare chains with enhanced thermal performance. Choose this set if you want ready-to-install chains with corrosion protection and reinforced rivets for regular cutting tasks, seasonal heavy use, or as backup replacements to minimize downtime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these chains fit Echo CS-490 saws?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They match 20\" bar length, .325\" pitch, .050\" gauge, and 78 drive links for Echo CS-490 and CS-440 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these chains ready to install out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each chain has a protective oil coating and heat-treated rivets, so they are ready for immediate installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56830964957524,"sku":"B0FT3CGDD4","price":71.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-packaging-20-inch-chains.jpg?v=1787009973"},{"product_id":"hipa-20-chainsaw-chains-3-pack-3-8-pitch-050-gauge-72dl-full-chisel-fits-husqvarna-455-460","title":"Hipa 20\" Chainsaw Chains 3-Pack — 3\/8\" Pitch .050\" Gauge 72DL Full-Chisel Fits Husqvarna 455\/460","description":"\u003cp\u003e\u003cstrong\u003eHipa’s 3-piece 20\" replacement chains are 3\/8\" pitch, .050\" gauge, 72 drive links full-chisel chains built to fit Husqvarna 455\/460 Rancher, Stihl MS311\/MS391 and compatible models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 3-pack of Hipa chains is designed for homeowners and professional users who need a durable, ready-to-install replacement for worn or damaged guide chains. Each chain comes with a protective oil surface coating and heat-treated rivets, and the perforated drive and reverse plates improve cooling, reduce wear, and keep cutting consistent under load. The set replaces OEM numbers such as 33RS 72 and 585550072 and comes sized for a 20\" bar with 3\/8\" pitch and .050\" gauge.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saw models and OEM numbers do these Hipa chains fit?\u003c\/h3\u003e\n\u003cp\u003eThese chains are made to work with common consumer and light-professional saws. They fit Husqvarna Rancher series saws, several Stihl models, and select Poulan machines, replacing listed OEM part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Husqvarna 455 and 460 Rancher\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Stihl MS311 and MS391\u003c\/li\u003e\n  \u003cli\u003eAdditional fit: Poulan PR5020\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers: 33RS 72, 585550072\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the perforated design affect chain performance?\u003c\/h3\u003e\n\u003cp\u003eThe perforated drive and reverse plates are engineered to reduce friction heat and wear where the chain contacts the bar and sprocket. Improved airflow and reduced contact surface slow down softening at high temperatures and help the chain stay sharper longer under heavy use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePerforations increase heat dissipation and reduce thermal stress\u003c\/li\u003e\n  \u003cli\u003eLess pin and plate abrasion extends service life\u003c\/li\u003e\n  \u003cli\u003eSmoother operation under continuous cutting loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes these chains ready to install out of the box?\u003c\/h3\u003e\n\u003cp\u003eEach chain is pre-coated with a protective oil layer to guard against rust during storage and transit. Rivets receive heat treatment and quenching to strengthen joints, so the chains arrive durable and prepared for immediate mounting and use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface protective oil prevents corrosion before installation\u003c\/li\u003e\n  \u003cli\u003eHeat-treated rivets resist breakage and maintain tension\u003c\/li\u003e\n  \u003cli\u003eSupplied in a 3-piece pack so you can swap spare chains quickly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain these Hipa chains for long life?\u003c\/h3\u003e\n\u003cp\u003eRoutine maintenance—correct tensioning, regular lubrication, and periodic sharpening—keeps the chain cutting efficiently and safely. Inspect the chain and bar after each use and replace when drive link wear or tooth damage is evident.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKeep chain properly tensioned according to your saw manual\u003c\/li\u003e\n  \u003cli\u003eLubricate the bar and chain each time you refuel\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters when they dull; replace chain if rivets or links show major wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Hipa 3PCS 20\" chain set is aimed at homeowners, land managers, and light-duty professionals who run Husqvarna 455\/460 Rancher, Stihl MS311\/MS391 or similar saws and want a cost-effective spare supply. It’s ideal if you prefer chains that arrive protected, strengthened, and ready to fit without extra prep, and for users who value improved cooling and reduced wear for frequent cutting tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these chains fit my Husqvarna 455 Rancher?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the chains are 20\" with 3\/8\" pitch and .050\" gauge made to fit Husqvarna 455 Rancher models that use 72 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the chains ready to install right away?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — each chain has a protective oil coating and heat-treated rivets, so they arrive prepared for immediate mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56830965055828,"sku":"B0FT38HF5C","price":71.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-packaging-20-inch-chain.jpg?v=1787009979"},{"product_id":"hipa-20-chainsaw-chain-3-pack-for-echo-cs-590-3-8-pitch-050-gauge-70-dl-full-chisel-pre-oiled","title":"Hipa 20\" Chainsaw Chain 3-Pack for Echo CS-590 — 3\/8\" Pitch .050\" Gauge, 70-DL Full-Chisel, Pre-Oiled","description":"\u003cp\u003e\u003cstrong\u003eHipa 3PCS 20\" replacement chains are 3\/8\" pitch, .050\" gauge, 70 drive-link full-chisel chains designed to fit Echo CS-590 and compatible saws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese three pre-coated replacement chains deliver a ready-to-install option for timber work and heavy-duty cutting when you need a reliable spare or an immediate swap. The set includes chains engineered with perforated plates to improve heat dissipation and reduce wear, a factory-applied protective oil coating to resist rust, and rivets that are heat-treated for better durability. Dimensions and drive-link count match common Echo models and several Poulan saws, making this a practical fit-for-purpose choice.\u003c\/p\u003e\n\n\u003ch3\u003eWill these chains fit my Echo CS-590 or Poulan saw?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the chains are sized to match 20\" guide bars with a 3\/8\" pitch and .050\" gauge, and they include 70 drive links to align with the specified sprocket and bar length. You should confirm your saw’s pitch, gauge, and required drive-link count before installing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Echo CS-590 TIMBER WOLF and CS-4400 models\u003c\/li\u003e\n  \u003cli\u003eCompatible with Poulan PR5020 and similar 20\" setups\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part number 72LPX70CQ\u003c\/li\u003e\n  \u003cli\u003eCheck bar groove width and sprocket teeth to confirm compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the perforated design affect chain performance?\u003c\/h3\u003e\n\n\u003cp\u003eThe perforated drive and reverse plates create air channels that reduce heat buildup and friction at the pin-and-plate junctions. Reduced operating temperature slows material softening and wear, which helps maintain cutting consistency and extends service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves airflow around pins and plates for cooler operation\u003c\/li\u003e\n  \u003cli\u003eDecreases friction and slows plate wear under heavy loads\u003c\/li\u003e\n  \u003cli\u003eSupports longer-lasting chain geometry and cutting sharpness\u003c\/li\u003e\n  \u003cli\u003eBeneficial for prolonged cutting sessions or dry conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and durability features are built into these chains?\u003c\/h3\u003e\n\n\u003cp\u003eEach chain is coated with a protective oil layer at the factory to guard against rust and surface corrosion during storage and initial use. Rivets receive heat treatment and quenching to increase strength and resistance to breakage, so the chains are ready to install straight from the package.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface-coated protective oil reduces corrosion risk\u003c\/li\u003e\n  \u003cli\u003eHeat-treated, quenched rivets for improved tensile reliability\u003c\/li\u003e\n  \u003cli\u003eFull-chisel cutters for aggressive, efficient cutting action\u003c\/li\u003e\n  \u003cli\u003ePrepared for immediate mounting without extra pre-treatment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain these chains for best life and safety?\u003c\/h3\u003e\n\n\u003cp\u003eRoutine sharpening, correct tensioning, and consistent lubrication will maximize life and preserve cutting performance. Inspect the chain frequently for pin wear, broken cutters, and proper fit, and replace the chain if damaged or stretched beyond safe limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKeep chain tension within manufacturer’s recommended range\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters or use a qualified sharpener when dull\u003c\/li\u003e\n  \u003cli\u003eUse quality bar and chain oil during operation\u003c\/li\u003e\n  \u003cli\u003eReplace chain if rivets loosen or cutting performance degrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 3-pack is aimed at professional arborists, landscapers, and serious homeowners who run 20\" Echo or compatible chainsaws and want immediate spares or replacements that balance cutting power and durability. If you need full-chisel performance, reduced thermal wear, and ready-to-use chains with OEM-equivalent sizing, this set provides a cost-effective solution for busy workdays and longer cutting tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain fit a 20\" Echo CS-590?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These chains are 20\" with 3\/8\" pitch, .050\" gauge and 70 drive links compatible with Echo CS-590 when specifications match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the chains ready to install right away?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each chain comes with a protective oil coating and heat-treated rivets, prepared for immediate installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56831300862292,"sku":"B0FT3CF829","price":66.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-packaging-20inch-chain.jpg?v=1787013728"},{"product_id":"hipa-carburetor-adjustment-tool-kit-pack-of-16-heat-treated-drivers-in-eva-case","title":"Hipa Carburetor Adjustment Tool Kit Pack-of-16, Heat-Treated Drivers in EVA Case","description":"\u003cstrong\u003eHIPA Pack-of-16 Carburetor Adjustment Tool Kit is a compact, heat-treated screwdriver set designed to tune and adjust carburetors on Stihl, Husqvarna and most 2-stroke outdoor power equipment.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact kit gathers 16 purpose-shaped carburetor tools in a protective EVA roll to help you quickly identify and adjust L, H, and idle screws on Zama, Walbro, Stihl, Husqvarna and many other carburetor models. Each driver is heat-treated steel with a corrosion-resistant nickel finish and a square handle for precise 1\/4-turn control. The included case keeps tips organized and ready for field repairs, seasonal tuning, and altitude or temperature-based carburetor changes.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will these tools actually fit?\u003c\/h3\u003e\n\u003cp\u003eThese drivers were shaped to match the common adjustment fittings used across major OEM carburetors. They work with string trimmers, chainsaws, leaf blowers, hedge trimmers, edgers, pole pruners and other handheld two-stroke tools that accept carburetor-style screwdrivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible brands: Zama, Walbro, Stihl, Husqvarna, Craftsman, Poulan, Weedeater, Echo, Homelite, Ryobi, MTD, Troy-Bilt and more.\u003c\/li\u003e\n  \u003cli\u003eCommon equipment: chainsaws, trimmers, blowers, hedge trimmers, edgers, pole saws.\u003c\/li\u003e\n  \u003cli\u003eMost 2-stroke engines using small slotted\/flat or tamper-style carburetor screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit improve tuning accuracy?\u003c\/h3\u003e\n\u003cp\u003eThe square handle design gives positive leverage for controlled 1\/4-turn adjustments, and the precisely machined tips fit carburetor screws to reduce cam-out. That makes small, repeatable changes easier so you can fine-tune idle, low- and high-speed settings without damaging screw heads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated steel tips for stiffness and minimal flex under torque.\u003c\/li\u003e\n  \u003cli\u003eNickel plating to resist rust and preserve fit accuracy over time.\u003c\/li\u003e\n  \u003cli\u003eEnd markings on each tool for quick identification of the right tip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the toolkit include and how is it organized?\u003c\/h3\u003e\n\u003cp\u003eThe set includes 16 specialized carburetor drivers and a compact EVA carrying case with elastic loops and mesh pockets to secure each piece. The case protects tools from the elements and keeps them organized whether you’re at the workbench or in the field.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16 distinct carburetor adjustment drivers covering common OEM tip shapes and sizes.\u003c\/li\u003e\n  \u003cli\u003eOne EVA storage case with built-in elastic bands and mesh lining to hold tools and prevent loss.\u003c\/li\u003e\n  \u003cli\u003eLightweight, portable design for shop or remote service work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these tools resist wear and corrosion?\u003c\/h3\u003e\n\u003cp\u003eThe drivers use a specialty steel that is heat-treated to increase hardness and reduce bending. A nickel-plated finish gives additional resistance to rust, helping tips keep their shape and fit over repeated use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThermally hardened shafts reduce tip deformation under load.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant nickel plating for longer service life in outdoor environments.\u003c\/li\u003e\n  \u003cli\u003eDurable EVA case protects tools from moisture and impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this tool kit for? This HIPA 16-piece carburetor adjustment kit is aimed at homeowners, landscapers, mechanics and DIYers who maintain two-stroke outdoor equipment. If you tune multiple brands or service equipment in variable conditions—different altitudes, seasons, or job sites—the compact, clearly marked set and protective case make routine adjustments faster and less prone to error. It’s especially useful for anyone who prefers shop-level control during on-the-trail repairs or seasonal carburetor tuning.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these drivers compatible with Stihl carburetors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—several tips match Stihl carburetor adjustment screws and common Zama\/Walbro patterns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a storage case for field use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the set comes with an EVA case with elastic loops and a mesh pocket to secure tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56831884263764,"sku":"B00Z0B8A1K","price":51.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-kit.jpg?v=1787021411"},{"product_id":"hipa-42-inch-high-lift-mower-blades-for-cub-cadet-troy-bilt-2-pack-high-carbon-alloy-for-bagging-side-discharge","title":"Hipa 42-inch High-Lift Mower Blades for Cub Cadet Troy-Bilt – 2-Pack, High-Carbon Alloy for Bagging \u0026 Side Discharge","description":"\u003cp\u003e\u003cstrong\u003eHipa 942-04308 high-lift mower blades are heavy-duty 42\" replacement blades engineered to restore bagging and side-discharge performance on Cub Cadet, Troy-Bilt and compatible 42-inch decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese OEM-compatible replacement blades fit a wide range of lawn tractors and riding mowers with a 42-inch deck and a 6-point star (5\/8\") center hole. Built from high-carbon alloy steel with chromium and molybdenum additions, the blades are shaped as high-lift\/air-lift profiles to create strong suction for faster cut rates, improved clipping pickup, and reliable side discharge. Each purchase includes a two-pack so you can replace both blades on a typical two-blade 42\" deck in one go.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these blades improve cutting and bagging performance?\u003c\/h3\u003e\n\u003cp\u003eThe Hipa high-lift profile generates stronger upward airflow beneath the deck, which helps lift grass upright before cutting and carries clippings into a bagger or out the chute. That boosts collection efficiency and reduces re-cutting for a cleaner finish. They're especially useful when cutting dense or slightly damp turf.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-lift design for powerful suction and improved bag filling\u003c\/li\u003e\n  \u003cli\u003eSharp factory edges to reduce tearing and produce uniform clippings\u003c\/li\u003e\n  \u003cli\u003e2-in-1 functionality: effective for both bagging and side discharge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these blades fit my mower model and deck size?\u003c\/h3\u003e\n\u003cp\u003eThese blades are sized for 42-inch decks and have a 21-3\/16\" overall length, 2-3\/8\" width, 5\/32\" thickness, and a 1-1\/8\" air lift height. The center mounting hole uses a 6-point star (5\/8\") pattern that matches many Cub Cadet, Troy-Bilt, MTD, and related models. Always compare measurements and hole pattern with your current blade before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 42\" decks such as Pony 42, Bronco 42, Super Bronco 42 Hydro, TB1942\u003c\/li\u003e\n  \u003cli\u003eMeasures 21-3\/16\" (538mm) with 6-point 5\/8\" star center hole\u003c\/li\u003e\n  \u003cli\u003eCompatible with OEM numbers like 742-04308 \/ 942-04308 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protections extend blade life?\u003c\/h3\u003e\n\u003cp\u003eHipa blades are manufactured from high-carbon alloy steel with chrome and molybdenum elements added for improved hardness and corrosion resistance. A painted edge coating helps prevent rust during storage and initial use; the coating will wear naturally as the blade sharpens in service. Proper installation and regular inspection are recommended to maximize service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy steel construction for wear resistance and toughness\u003c\/li\u003e\n  \u003cli\u003ePainted edges to delay rust during storage and early use\u003c\/li\u003e\n  \u003cli\u003eReplace when bent, cracked, or excessively worn—to ensure safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and care for these blades safely?\u003c\/h3\u003e\n\u003cp\u003eAlways remove the spark plug wire or disconnect the battery before working under the deck. Use thick gloves to handle the painted edges and secure blades with the correct bolts and torque values from your mower manual. Inspect blades for cracks or damage each season and balance blades after sharpening to prevent vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWear gloves; disconnect power before installation\u003c\/li\u003e\n  \u003cli\u003eCheck blade torque and secure fasteners per mower manual\u003c\/li\u003e\n  \u003cli\u003eSharpen or replace blades promptly; balance blades to avoid vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This two-pack of Hipa 942-04308 high-lift blades is designed for homeowners and landscape pros who own 42-inch deck riding mowers from Cub Cadet, Troy-Bilt, MTD and similar brands and want reliable bagging and side-discharge performance. Choose these blades if you need OEM-compatible replacements that restore airflow, improve clipping collection, and are built from durable alloy steel for extended use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these Hipa blades fit all 42-inch mower decks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit most 42\" decks with a 6-point star (5\/8\") center hole; verify blade length and hole pattern against your existing blade.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these for both bagging and side discharge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the high-lift 2-in-1 profile is designed to support efficient bagging and effective side discharge.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832137658708,"sku":"B0DJSNFHT6","price":74.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-42-inch-blades-front-view.jpg?v=1787023459"},{"product_id":"hipa-48-inch-high-lift-mower-blades-for-john-deere-3-pack-7-point-star-oem-fit","title":"Hipa 48-inch High-Lift Mower Blades for John Deere — 3-Pack, 7-Point Star OEM Fit","description":"\u003cstrong\u003eHipa high-lift replacement blades for 48-inch John Deere decks deliver strong suction for bagging and reliable cutting performance in a 3-blade set.\u003c\/strong\u003e\n\n\u003cp\u003eThese Hipa blades are engineered as high-lift replacements compatible with many John Deere 48\" decks, including D140, D150, D155, D160 and E140 series models. Each blade is manufactured to the dimensions and mounting profile that match the 7-point star center found on the original equipment, providing fitment that’s ready to bolt on and resume efficient mowing.\u003c\/p\u003e\n\n\u003ch3\u003eWill these blades fit my John Deere 48-inch deck?\u003c\/h3\u003e\n\u003cp\u003eYes — the blades are designed to match the common 7-point star center used on many John Deere 48\" mower decks. They are sized to the OEM dimensions so they seat and secure the same way as the factory blades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCenter hole: 7-point star pattern compatible with listed John Deere models\u003c\/li\u003e\n  \u003cli\u003eLength: 17-1\/8\" (435 mm); Width: 2-3\/4\" (70 mm)\u003c\/li\u003e\n  \u003cli\u003eThickness: 5\/32\" (4 mm) with 1-3\/16\" (30 mm) air lift\u003c\/li\u003e\n  \u003cli\u003eSold as a pack of three blades for a 48\" deck\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these high-lift blades change cutting and collection?\u003c\/h3\u003e\n\u003cp\u003eHigh-lift geometry increases airflow under the deck so clippings are pulled upward and out through the chute or into the bagger more consistently. That suction helps with bagging, side discharge, and handling taller or damper grass compared with standard blades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-lift edge profile produces stronger deck airflow for better collection\u003c\/li\u003e\n  \u003cli\u003eWorks for both bagging and side-discharge applications\u003c\/li\u003e\n  \u003cli\u003eImproves mulch and cut quality when used on compatible decks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these blades ready to install and durable for regular use?\u003c\/h3\u003e\n\u003cp\u003eHipa ships the blades with painted cutting edges to prevent corrosion and to protect hands during handling; the protective coating wears off naturally after mowing. The blades meet the OEM dimensions and are made from hardened steel suitable for routine lawn care, though normal wear and occasional sharpening will be required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProtective paint on edges for rust prevention and safer handling\u003c\/li\u003e\n  \u003cli\u003eMade to OEM-style thickness and profile for strength and longevity\u003c\/li\u003e\n  \u003cli\u003eRoutine sharpening recommended for best cutting performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many blades do I get, and what maintenance should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis package contains three identical high-lift blades — the quantity needed for a 48\" deck. Expect to inspect blades after strikes or seasonal use and replace or resharpen when dents, nicks, or excessive wear degrade cutting quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes 3 Hipa high-lift blades designed for a 48\" mower deck\u003c\/li\u003e\n  \u003cli\u003eInspect after impacts; replace if bent or badly nicked\u003c\/li\u003e\n  \u003cli\u003eKeep blades balanced when sharpening to avoid vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners and groundskeepers with John Deere 48\" decks who want a direct-fit high-lift replacement for better bagging and efficient side discharge. These blades suit users who need OEM-style dimensions, strong airflow for collection, and a ready-to-install 3-pack to service a full 48\" cutting deck.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades match John Deere OEM part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They’re made to fit OEM references like GY20852, AM141035, GX21784 and GX21786 for 48\" decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these blades be used for bagging and side discharge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The high-lift design supports both bagging and side discharge, improving clipping suction.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832182124884,"sku":"B0DJSTV96P","price":74.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-view-48-inch-blade.jpg?v=1787024337"},{"product_id":"hipa-46-inch-mulching-blades-2-pack-for-cub-cadet-6-point-star-high-lift-toothed","title":"Hipa 46-inch Mulching Blades 2-Pack for Cub Cadet — 6-Point Star, High-Lift Toothed","description":"\u003cstrong\u003eThese Hipa 2-pack 942-04290 toothed mulching blades are 46-inch, 6-point star replacement blades engineered to mulch, bag, or side-discharge on compatible Cub Cadet 46\" decks.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Cub Cadet lawn tractor needs renewed cutting performance, these alloy-steel mulching blades restore lift, improve clippings flow, and offer a 3-in-1 cutting profile for bagging, side-discharge, or finely mulching grass. Built to the OEM 942-04290 specifications, each blade features a 6-point star mounting hole and a high-lift toothed profile to handle thicker growth and boost bagging capacity.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these blades improve mowing performance?\u003c\/h3\u003e\n\u003cp\u003eThe toothed, curved profile increases airflow and lift, so clippings are cut finer and moved more efficiently into a bag or across the deck for even discharge. The design reduces clogging on heavier turf and helps produce a consistent finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-lift toothed edge increases suction and bagging efficiency by up to 50%.\u003c\/li\u003e\n  \u003cli\u003eCurved teeth chop clippings into smaller pieces for better mulching.\u003c\/li\u003e\n  \u003cli\u003eRaised air-lift dimension (1-1\/8\") encourages stable airflow under the deck.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these blades compatible with my Cub Cadet model?\u003c\/h3\u003e\n\u003cp\u003eThese blades match the OEM 942-04290 family and fit many 46\" Cub Cadet decks. Confirm your tractor’s deck size and the 6-point star center hole before installing to ensure a correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Cub Cadet LTX1045, LTX1046, XT1 and XT2 Enduro series.\u003c\/li\u003e\n  \u003cli\u003eWorks with LT46, LX46 and ZT1\/ZT2 Ultima series 46\" decks (46 KH).\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 6-point star (5\/8\").\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the blade dimensions and materials?\u003c\/h3\u003e\n\u003cp\u003eEach blade follows precise OEM dimensions so mounting and balance remain correct. They are made from alloyed high-carbon steel with chromium and molybdenum additions for toughness and improved corrosion resistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 23-1\/4\" (590 mm); width: 2-3\/8\" (60 mm); thickness: 5\/32\" (4 mm).\u003c\/li\u003e\n  \u003cli\u003eAir lift height: 1-1\/8\" (28 mm) for stronger airflow.\u003c\/li\u003e\n  \u003cli\u003eAlloy construction improves wear resistance and extends service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain these blades safely?\u003c\/h3\u003e\n\u003cp\u003eAlways disconnect spark plug and follow the tractor manufacturer’s safety steps before handling blades. The painted edge reduces rust and protects hands during installation, but wear heavy gloves and inspect blades for cracks or damage before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWear thick gloves and secure the blade with correct bolts and torque specs.\u003c\/li\u003e\n  \u003cli\u003eCheck for balance and damage each season; sharpen or replace if nicked or bent.\u003c\/li\u003e\n  \u003cli\u003ePainted edges resist corrosion during storage; expect normal wear during use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Hipa’s 942-04290 2-pack is aimed at homeowners and lawn-care pros running Cub Cadet 46\" deck tractors who want a durable, OEM-spec replacement that boosts mulching, bagging, and side-discharge performance. Choose these blades if you mow mixed or overgrown grass regularly, need better bagging capacity, or want a direct-fit alloy-steel alternative to OEM 942-04290 series parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these blades fit my Cub Cadet 46\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your deck uses the OEM 942-04290 6-point star mounting; confirm a 46\" deck and 5\/8\" star center hole first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these blades mulch and bag equally well?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the toothed 3-in-1 design mulches, bags, and side-discharges effectively, improving bagging capacity and clippings size.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832184287572,"sku":"B0DJSSXFGD","price":74.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-view-46inch-blade.jpg?v=1787024379"},{"product_id":"hipa-50-inch-mulching-blades-3-pack-for-toro-timecutter-ss5000-alloy-steel-medium-lift","title":"Hipa 50-Inch Mulching Blades 3-Pack for Toro TimeCutter SS5000 — Alloy-Steel, Medium-Lift","description":"\u003cp\u003e\u003cstrong\u003eHipa's 3-pack of 50-inch mulching blades replaces Toro part numbers 112-9759-03 and 115-5059-03 for TimeCutter and SS5000 decks, delivering heavy-duty alloy-steel construction for longer wear and efficient mulching.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese mulching blades are designed for 50-inch riding mower decks used on a range of Toro TimeCutter and MX\/SS models. Built from alloy steel with rust-resistant paint on the edge, the blades balance strength and longevity while transforming grass clippings into fine particles that return nutrients to the turf. The set contains three medium-lift blades intended for mulching and is manufactured to match the mounting configurations of the listed Toro part numbers—confirm your deck’s bolt pattern before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Toro models will these Hipa blades fit?\u003c\/h3\u003e\n\u003cp\u003eThese blades are compatible with many 50-inch Toro TimeCutter and MX\/SS series models, including SS5000, MX5000, MX5060, SS5060 and several Z-series TimeCutter machines. Because Toro has produced different mounting hole patterns across years, always verify the exact part number or blade bolt pattern for your machine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 50-inch decks on SS5000, MX5000, MX5060, MX5025, MX3450 and similar models\u003c\/li\u003e\n  \u003cli\u003eCompatible with TimeCutter Z-series like Z5000, Z5020, Z5030, Z5060 and Z5035\u003c\/li\u003e\n  \u003cli\u003eReplaces Toro part numbers 112-9759-03, 115-5059-03, 112975903 and related MPNs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these blades improve mowing and mulching performance?\u003c\/h3\u003e\n\u003cp\u003eThe medium-lift mulching profile chops grass clippings into smaller particles and circulates them under the deck for even redistribution across the lawn. That action reduces bagging and blow-away, returning organic matter to feed the turf while producing a cleaner cut.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMedium-lift design increases airflow for effective mulching\u003c\/li\u003e\n  \u003cli\u003eSharp, precision-formed cutting surface for even clippings\u003c\/li\u003e\n  \u003cli\u003eThree-blade set covers a full 50-inch deck for balanced performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protective features do Hipa blades offer?\u003c\/h3\u003e\n\u003cp\u003eHipa uses alloy steel with added elements for increased tensile strength and wear resistance compared with basic carbon steel. The cutting edge is coated with paint to inhibit rust during storage and initial use; this coating will wear off with mowing and is not a cutting-edge treatment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy-steel construction for strength and longer service life\u003c\/li\u003e\n  \u003cli\u003ePainted edges to reduce surface corrosion before first use\u003c\/li\u003e\n  \u003cli\u003eInspect for cracks or looseness before each use; wear gloves during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I confirm fit and install these blades safely?\u003c\/h3\u003e\n\u003cp\u003eCompare your mower’s blade mounting hole pattern and part number to the Hipa listing before purchase to ensure compatibility. Follow the mower manufacturer's torque specs and safety guidance during installation; always use heavy gloves and disconnect the spark plug or power source first.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify blade MPN and bolt-hole configuration for your model year\u003c\/li\u003e\n  \u003cli\u003eUse manufacturer torque recommendations and secure washers\/hardware\u003c\/li\u003e\n  \u003cli\u003eDisconnect spark plug and wear thick gloves for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Landscapers and homeowners who own a 50-inch Toro TimeCutter or compatible MX\/SS deck and want a cost-effective mulching solution. If you need a durable, medium-lift blade set that replaces common Toro part numbers and improves turf recycling without adding bagging work, this three-piece Hipa set is a practical aftermarket option. Confirm your mower’s mounting pattern and follow safety steps during installation for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these Hipa blades fit all Toro 50-inch decks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many Toro 50-inch TimeCutter and SS\/MX models, but verify your blade mounting hole pattern or part number before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the blades ready to install out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, blades arrive painted and ready, but inspect for damage, wear gloves, and follow mower torque specs during installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832319226196,"sku":"B0FYCJX11S","price":74.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-view-50-inch-blade-pack.jpg?v=1787026995"},{"product_id":"hipa-mulching-blades-for-husqvarna-z248f-48-inch-3-pack-alloy-steel-5-point-star","title":"Hipa Mulching Blades for Husqvarna Z248F 48-inch — 3-Pack Alloy-Steel, 5-Point Star","description":"\u003cp\u003e\u003cstrong\u003eThese Hipa 532180054 mulching blades are a 3-pack of 48-inch, 5-point star replacement blades engineered to fit many Husqvarna Z248F and related zero-turn mower decks for finer clippings and reliable durability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Husqvarna zero-turn mower is leaving long clumps or your old blades are nicked, switching to a correctly matched mulching blade restores even cut quality and returns finely shredded clippings to the lawn as natural mulch. The Hipa Z248F blades are alloy-steel, come in a three-piece set, and use the 5-point star mounting pattern common to a range of Husqvarna models. Before ordering, confirm the blade mounting hole pattern and MPN to ensure these blades match your specific mower year and model.\u003c\/p\u003e\n\n\u003ch3\u003eWill these blades fit my Husqvarna Z248F or YTH model?\u003c\/h3\u003e\n\u003cp\u003eThese blades are listed as compatible with Husqvarna models that use a 48\" deck and the 5-point star mounting pattern, including Z248F, YTH24V48, YTH24K48 and many YTH\/RYT series variants. Compatibility can change between years, so it's important to match the blade part number and hole pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck your mower manual or the existing blade for part numbers like 532180054 or 173920.\u003c\/li\u003e\n  \u003cli\u003eVerify the 5-point star mounting hole aligns with your spindle hardware.\u003c\/li\u003e\n  \u003cli\u003eContact the seller with your mower model and year for confirmation if unsure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do Hipa mulching blades improve lawn appearance?\u003c\/h3\u003e\n\u003cp\u003eMulching blades are shaped and balanced to recirculate clippings inside the deck, cutting them into smaller particles that settle back into the turf. This reduces visible clumps, speeds decomposition, and distributes nutrients to the soil surface for a tidier, nourished lawn without bagging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChops grass into finer pieces for faster breakdown.\u003c\/li\u003e\n  \u003cli\u003eEven spread prevents striping and clumping on 48\" decks.\u003c\/li\u003e\n  \u003cli\u003eReduces time spent on clipping cleanup and bagging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes do these blades use for longevity?\u003c\/h3\u003e\n\u003cp\u003eHipa’s blades are manufactured from alloy steel that includes strengthening elements for improved wear resistance and rust protection. The cutting edges are painted to help prevent corrosion and to protect hands during handling, although the coating will wear with use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy steel construction for higher strength and longer life.\u003c\/li\u003e\n  \u003cli\u003ePainted edges resist surface rust during storage and install.\u003c\/li\u003e\n  \u003cli\u003eInspect blades regularly for cracks, nicks, and proper tightness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain these 48\" mulching blades?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires matching the 5-point star hole to your spindle and torquing hardware to the mower manufacturer’s specification. Always wear heavy gloves when handling blades and check for balance and damage after installation and periodically during the season.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse heavy gloves and follow mower-specific torque settings.\u003c\/li\u003e\n  \u003cli\u003eReplace blades in matched sets to keep deck balance.\u003c\/li\u003e\n  \u003cli\u003eSharpen or replace when edges dull or if you find cracks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These Hipa 532180054 mulching blades are aimed at owners of Husqvarna-compatible 48\" zero-turn and riding mowers who want a reliable, OEM-pattern replacement that improves clipping dispersal and reduces bagging. Ideal for homeowners and landscapers who confirm their mower’s 5-point star mounting pattern and want a three-blade set for a full-deck refresh.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades fit every Husqvarna 48\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many Husqvarna 48\" decks that use the 5-point star mounting; verify the blade part number and hole pattern for your specific model year.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many blades are included and should I replace all at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This listing includes three blades, and replacing all three at once helps maintain deck balance and consistent cutting performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832319390036,"sku":"B0FYC2Y1D3","price":73.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-husqvarna-front-packaging-48in-blade.jpg?v=1787026991"},{"product_id":"hipa-zt1-54-high-lift-mower-blades-3-pack-for-54-cub-cadet-decks-alloy-steel-6-point-star","title":"Hipa ZT1 54 High-Lift Mower Blades 3-Pack for 54\" Cub Cadet Decks — Alloy Steel, 6-Point Star","description":"\u003cp\u003e\u003cstrong\u003eHipa ZT1 54 High Lift Mower Blades (part 942-05056) are a 3-pack of alloy-steel, 6-point star replacement blades engineered to restore strong lift and reliable grass collection on 54\" Cub Cadet-style decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your riding mower’s cut quality or bagging performance has slipped, worn or bent blades are often the cause. These Hipa replacement blades match the 6-star mounting pattern used on many Cub Cadet ZT1, ZT2, XT1 and XT2 54\" decks and are made from alloy steel for improved wear resistance and corrosion protection. The set includes three identical high-lift blades to replace the complete blade set on a 54-inch deck and is supplied with a painted edge to limit surface rust prior to first use.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these blades affect cut quality and collection?\u003c\/h3\u003e\n\u003cp\u003eHigh-lift blades create a concentrated upward airflow that lifts grass before slicing, which improves bagging and gives a more even finish. On lawns with heavier or slightly wet clippings they help move material into the discharge or collector rather than leaving clumps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for strong upward airflow to improve bagging and mulching efficiency\u003c\/li\u003e\n  \u003cli\u003eSharper, uniform cutting edge for a cleaner finish\u003c\/li\u003e\n  \u003cli\u003eHelps prevent clumping on thicker turf by moving clippings upward into the deck stream\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these blades fit my mower model and how do I check compatibility?\u003c\/h3\u003e\n\u003cp\u003eThese blades use the 6-point star mounting pattern listed under multiple part numbers (942-05056, 942-05056A, 942-05056-X and equivalents). Fit depends on the blade mounting hole pattern and not just the mower name, so verify the blade hole shape on your spindle before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many Cub Cadet models that use a 54\" deck (ZT1-54, ZT2-54, XT1-54, XT2-54 and related series)\u003c\/li\u003e\n  \u003cli\u003eCross-references include 742-05056, 490-110-C143 and CMXGZAM110143\u003c\/li\u003e\n  \u003cli\u003eCheck your mower’s parts manual or remove an existing blade to confirm the 6-star hole pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are these blades made of and how durable are they?\u003c\/h3\u003e\n\u003cp\u003eThe Hipa blades are manufactured from alloy steel with added elements for improved strength and wear resistance compared with plain carbon steel. A protective paint coating on the cutting edge helps resist surface rust during storage and initial use, although the finish will naturally wear with mowing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloyed steel includes chromium and molybdenum for improved toughness\u003c\/li\u003e\n  \u003cli\u003ePainted edge reduces corrosion risk and protects hands during installation\u003c\/li\u003e\n  \u003cli\u003eInspect blades regularly for cracks, bends, or loosened fasteners to maintain safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain these replacement blades?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward but requires care: always wear thick gloves, torque blades to the manufacturer’s specification, and use the correct bolt pattern orientation. Regular maintenance—balancing, sharpening, and checking for damage—keeps cut quality high and extends blade life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace all three blades on a 54\" deck at once for balanced operation\u003c\/li\u003e\n  \u003cli\u003eWear protective gloves and follow mower manufacturer torque settings\u003c\/li\u003e\n  \u003cli\u003eSharpen or replace blades at the first sign of significant nicks, bends, or imbalance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hipa ZT1 54 942-05056 blade set is intended for owners of 54\" Cub Cadet-style riding mowers and lawn tractors that use the 6-point star mounting pattern, and for landscapers or homeowners who need a dependable, economical three-blade replacement that restores lift and collection. Confirm the blade mounting pattern and part number on your machine before purchasing to ensure proper fit and safe installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades fit my Cub Cadet ZT1-54?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit ZT1-54 models that use the 6-point star mounting pattern; verify your blade hole pattern or MPN before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many blades are included and what material are they?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This listing includes a 3-pack of alloy-steel high-lift blades designed for improved strength and rust resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832319422804,"sku":"B0FYC284VY","price":72.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-packaging-3pack-blades.jpg?v=1787026991"},{"product_id":"hipa-54-high-lift-5-point-star-mower-blades-3-pack-replacement-for-husqvarna-z254f-mz54-rz54-alloy-steel-improved-bagging","title":"Hipa 54\" High-Lift 5-Point Star Mower Blades 3-Pack — Replacement for Husqvarna Z254F MZ54 RZ54, Alloy Steel, Improved Bagging","description":"\u003cstrong\u003eHipa 3-pack 187256 high-lift, 5-point star blades are replacement 54\" mower blades engineered to restore cutting performance and improve bagging on compatible Husqvarna zero-turn and riding mower models.\u003c\/strong\u003e\n\n\u003cp\u003eIf your 54-inch Husqvarna deck is leaving uneven clippings, reducing bagging efficiency, or the blades are nicked and worn, this Hipa three-blade set offers a direct-fit replacement for many Z254F, MZ54 and similar models. These high-lift, 5-point star blades recreate the factory airflow pattern for stronger suction and cleaner cuts while using alloy steel for durability.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models will accept these Hipa 187256 blades?\u003c\/h3\u003e\n\u003cp\u003eThese blades are designed for 54-inch decks that use a 5-point star mounting pattern. They match the 187256\/532187256 style and cross-reference several Husqvarna model families, but always verify your deck’s mounting pattern and blade part number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: Z254F, MZ54, RZ5424, RZ5426 and many 54\" Husqvarna\/compatible decks.\u003c\/li\u003e\n  \u003cli\u003eAlso cross-references part numbers like 187256 and 532187256 for compatibility checks.\u003c\/li\u003e\n  \u003cli\u003eNot universal—blade hole patterns can vary by year; confirm the 5-point star mount on your spindle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these high-lift blades change cutting and collection performance?\u003c\/h3\u003e\n\u003cp\u003eHigh-lift blades are shaped to generate stronger upward airflow beneath the deck, which lifts grass before cutting and moves clippings toward the bagger or chute. That airflow improves bagging, produces finer clippings, and helps maintain a cleaner deck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates concentrated upward suction for improved bagging of damp or heavy clippings.\u003c\/li\u003e\n  \u003cli\u003eProduces a cleaner, more uniform cut by lifting blades of grass into the airflow stream.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce clumping on the deck and chute blockages when installed correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction features help these blades last?\u003c\/h3\u003e\n\u003cp\u003eHipa blades are stamped from alloy steel that includes strengthened elements for wear resistance and corrosion protection. A painted edge finish reduces rust initially and protects hands during handling, though the coating will wear with use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy steel construction for improved toughness and longer life than basic carbon blades.\u003c\/li\u003e\n  \u003cli\u003ePainted edges resist rust and provide safer handling during installation.\u003c\/li\u003e\n  \u003cli\u003eInspect regularly for cracks, tightness, and wear; replace if damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain these replacement blades?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard blade replacement steps: support the mower, remove the spark plug, and use the correct torque on the blade bolts. Routine checks and sharpening keep performance consistent; always use thick gloves and follow safety guidelines when handling blades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect spark plug and secure mower before changing blades.\u003c\/li\u003e\n  \u003cli\u003eUse proper socket sizes and torque per your mower manual; check bolt tightness periodically.\u003c\/li\u003e\n  \u003cli\u003eWear sturdy gloves; inspect blades for bends, cracks, or excessive wear before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Hipa 3-pack is made for homeowners and landscapers who operate 54\" decks that require a 5-point star mounting blade—especially owners of Husqvarna Z254F, MZ54 and related models seeking improved bagging and a cost-effective way to refresh cutting performance. Choose this set if you need direct-fit replacements built from alloy steel and want the stronger airflow of high-lift blades; confirm your deck’s mounting pattern and OEM part number to ensure proper fit before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these Hipa blades fit my Husqvarna Z254F?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Z254F models with a 54\" deck that use the 5-point star mounting pattern and the 187256\/532187256 part number.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these blades pre-sharpened and rust-coated?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—blades come painted at the edges for rust protection and are sharpened for immediate use, though the coating will wear over time.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832320012628,"sku":"B0FYC2316W","price":76.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-packaging-54-inch-blades.jpg?v=1787027018"},{"product_id":"hipa-mulching-blades-2-pack-for-toro-22-recycler-alloy-steel-direct-fit-replacement-for-131-4547-03","title":"Hipa Mulching Blades 2-Pack for Toro 22\" Recycler — Alloy Steel, Direct-Fit Replacement for 131-4547-03","description":"\u003cp\u003e\u003cstrong\u003eThese two Hipa 131-4547-03 mulching blades replace Toro 131-4547-03 \/ 108-9764-03 on 22\" Recycler decks to finely chop clippings and return them as natural lawn feed.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a Toro 22-inch Recycler lawn mower or tractor and want to restore mulching performance, this Hipa 2-pack is built as a direct-fit replacement for the specified part numbers. The blades are forged from alloy steel for improved wear resistance and corrosion protection, shaped to re-cut grass into small particles inside the deck so clippings disperse evenly back onto the turf.\u003c\/p\u003e\n\n\u003ch3\u003eWill these blades fit my Toro 22\" Recycler model?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on the blade mounting pattern on your mower. These Hipa blades match Toro part numbers 131-4547-03 and 108-9764-03, which use the circle-style mounting hole configuration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck your mower’s current blade part number or compare the mounting hole shape.\u003c\/li\u003e\n  \u003cli\u003eConfirm deck diameter is 22 inches and that your model lists those Toro part numbers.\u003c\/li\u003e\n  \u003cli\u003eContact Toro or consult the owner’s manual when in doubt about model-year variations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these mulching blades improve mowing results?\u003c\/h3\u003e\n\u003cp\u003eThe blade geometry and sharpened edges recut grass multiple times inside the deck, producing finer clippings that fall evenly across the lawn. That reduces bagging and returns nutrients to the soil for a neater, greener appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulching action reduces visible clumps and decreases cleanup time.\u003c\/li\u003e\n  \u003cli\u003eSmaller clippings decompose faster, releasing organic matter to the turf.\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain balance and safe rotation when installed correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are these blades made of and how long will they last?\u003c\/h3\u003e\n\u003cp\u003eHipa blades use an alloy steel formulation—high-carbon steel enhanced with elements like chromium and molybdenum—to increase toughness, resist wear, and slow rust. A protective paint finish helps prevent corrosion and protects hands during installation, though it will wear off with use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy steel construction for improved edge retention and durability.\u003c\/li\u003e\n  \u003cli\u003ePainted edges resist surface rust before first use.\u003c\/li\u003e\n  \u003cli\u003eRegular inspection and sharpening extend service life; replace if bent or cracked.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and safety?\u003c\/h3\u003e\n\u003cp\u003eBefore installing, ensure the mower is off, spark plug disconnected, and the deck stabilized. Wear heavy gloves and inspect blades for damage; torque mounting bolts to the mower manufacturer’s specification to prevent imbalance or blade loss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse thick gloves when handling to avoid cuts from the edge or painted coating.\u003c\/li\u003e\n  \u003cli\u003eVerify blade orientation matches the mower’s rotation direction and mount securely.\u003c\/li\u003e\n  \u003cli\u003eCheck tightness after the first mowing session and periodically thereafter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Landscapers, homeowners, and fleet managers with Toro 22\" Recycler mowers seeking to restore or improve mulching performance without replacing the deck. These blades suit anyone wanting to reduce clippings pickup, recycle grass nutrients, and get consistent cut-and-dispersal results—provided the mower uses the specified Toro mounting pattern.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades fit all Toro 22\" mowers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Toro 22\" Recycler models that use part numbers 131-4547-03 or 108-9764-03; verify your mower’s blade mounting pattern before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I sharpen these blades to extend life?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Light sharpening is fine, but keep blade balance and replace any bent or cracked blades for safe operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832320078164,"sku":"B0FYBSNT4H","price":67.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-view-131-4547-03-mulching-blade.jpg?v=1787027017"},{"product_id":"hipa-carburetor-kit-for-troy-bilt-storm-2620-2410-208cc-replacement-with-primer-bulb-ignition-key","title":"Hipa carburetor kit for Troy-Bilt Storm 2620\/2410 — 208cc replacement with primer bulb \u0026 ignition key","description":"\u003cp\u003e\u003cstrong\u003eThe Hipa Storm 2620\/2410 208cc carburetor kit is a complete replacement set designed to restore fuel delivery and starting reliability for compatible Troy-Bilt, Craftsman and Cub Cadet two-stage snow blowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Storm-series or similar snow thrower is sputtering, hard to start, or losing power, a clogged or worn carburetor is often the culprit. This aftermarket Hipa kit includes the carburetor body plus a spark plug, primer bulb, gaskets, tubing and an ignition key to make swap-out straightforward and reduce downtime when preparing for snow season.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor kit fit my snow blower model?\u003c\/h3\u003e\n\u003cp\u003eThe kit is built to fit a range of Troy-Bilt Storm models and many equivalent engines across Craftsman, Cub Cadet and MTD product lines. Fitment covers Storm 2410, 2620, 2420 and 2690 families and specific engine codes listed by manufacturers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Troy-Bilt Storm 2410, 2620, 2420, 2690 and Squall\/Snow Tracker variants\u003c\/li\u003e\n  \u003cli\u003eCompatible with Craftsman 179cc\/208cc models referenced by parts numbers\u003c\/li\u003e\n  \u003cli\u003eAlso fits select Cub Cadet and MTD engines (see engine codes and part references)\u003c\/li\u003e\n  \u003cli\u003eIncludes ignition key matching replacement numbers 951-10630 and 731-05632\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and why they matter?\u003c\/h3\u003e\n\u003cp\u003eThis kit supplies the most common failing parts you’ll need during a rebuild or field repair so you don’t have to hunt for small pieces. Key items like gaskets and the primer bulb ensure a proper seal and reliable fuel prime while the new spark plug and ignition key complete ignition and security needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne complete carburetor body engineered for the specified engines\u003c\/li\u003e\n  \u003cli\u003eReplacement spark plug to ensure proper ignition and easier starting\u003c\/li\u003e\n  \u003cli\u003ePrimer bulb, three gaskets and two fuel tubes for leak-free installation\u003c\/li\u003e\n  \u003cli\u003eIgnition key included so you can replace a lost or damaged key during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a moderate DIY task for anyone comfortable with small engines and hand tools; it typically takes 30–90 minutes depending on access and corrosion. Follow safe practices: disconnect the spark, drain fuel or clamp lines, and replace gaskets carefully to avoid vacuum leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic socket set, screwdrivers and pliers are usually enough\u003c\/li\u003e\n  \u003cli\u003eCareful cleaning of the mounting surface improves seal performance\u003c\/li\u003e\n  \u003cli\u003eReplace fuel lines if brittle; clamp or secure new tubes supplied in the kit\u003c\/li\u003e\n  \u003cli\u003eTest run and minor carb adjustment may be required for optimal idle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit compare to OEM parts and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis aftermarket kit is designed to meet the fit and function required by the listed models at a value price. While not an OEM-branded component, it supplies all necessary consumables for a full carburetor swap and is intended as a direct replacement for the referenced part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces MTD\/Troy-Bilt part numbers including 951-12705 and 951-14027A\u003c\/li\u003e\n  \u003cli\u003eIncludes multiple gaskets and primer to match factory sealing requirements\u003c\/li\u003e\n  \u003cli\u003eDelivered as a ready-to-install assembly with ignition key and plug\u003c\/li\u003e\n  \u003cli\u003eQuality control and fitment checks recommended before final reassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hipa Storm 2620\/2410 208cc carburetor kit is ideal for homeowners, small-property managers and repair shops who maintain Troy-Bilt Storm and compatible snow blowers and need a single package that replaces common wear items. Choose this kit if your machine is hard to start, idles poorly, or if you want to perform preventive maintenance before winter. If you have an uncommon engine variant, compare your engine and parts numbers to the fitment list to confirm compatibility before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include the ignition key?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the kit includes an ignition key compatible with replacement numbers 951-10630 and 731-05632.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need to adjust the carburetor after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A minor idle or mixture adjustment may be needed; test run and fine-tune per the engine manual.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832388006228,"sku":"B0BFKNV1DC","price":50.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-storm-carburetor-front-view.jpg?v=1787028425"},{"product_id":"hipa-stator-for-kohler-john-deere-engines-237878-s-15a-20a-direct-fit-replacement-for-cv-ch-k-sv-series","title":"Hipa Stator for Kohler \u0026 John Deere Engines 237878-S — 15A\/20A Direct-Fit Replacement for CV CH K SV Series","description":"\u003cp\u003e\u003cstrong\u003eHipa 237878-S is a direct-fit stator designed to restore charging and ignition performance on compatible Kohler and John Deere small engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement stator is built as a drop-in electrical component for a wide range of Kohler CV, CH, SV, K and E-series engines, plus select John Deere residential mowers (LX and STX lines). It’s sized and wired to match the factory specifications for 15A and 20A systems, letting you replace a worn or damaged stator without modifying the engine harness or mounting points.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this stator will fit my engine?\u003c\/h3\u003e\n\u003cp\u003eCheck the engine model and existing part number against the compatibility list before ordering. The Hipa 237878-S matches many Kohler and John Deere OEM references and drops into the original stator location using factory fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare your current part number (e.g., 237878-S or equivalent Kohler\/MTD numbers).\u003c\/li\u003e\n  \u003cli\u003eVerify engine series: CV, CH, SV, K, E-series and listed John Deere LX\/STX models.\u003c\/li\u003e\n  \u003cli\u003eConfirm connector type and mounting holes visually to ensure plug-and-play fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical performance should I expect after installation?\u003c\/h3\u003e\n\u003cp\u003eThis stator is offered in 15 Amp and 20 Amp variants to match your machine’s charging load and ignition requirements. Once installed, it restores the alternator output to bring the battery charging and lighting circuits back to operating range without additional tuning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to meet original amperage ratings for stable charging.\u003c\/li\u003e\n  \u003cli\u003eCompatibility with standard ignition coils and regulator\/rectifiers.\u003c\/li\u003e\n  \u003cli\u003eInsulated windings and soldered connections for reliable output under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and what should I inspect before ordering?\u003c\/h3\u003e\n\u003cp\u003eThe package includes a single stator assembly. To avoid returns, double-check your engine’s model and the part number from the old stator, and inspect connectors and physical mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne replacement stator in the box—no extra hardware or gaskets.\u003c\/li\u003e\n  \u003cli\u003eEnsure your engine’s model matches the compatibility list provided.\u003c\/li\u003e\n  \u003cli\u003eLook for matching wire colors and plug style for straightforward installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what basic tools are needed?\u003c\/h3\u003e\n\u003cp\u003eReplacement is moderate difficulty for someone comfortable with small-engine maintenance. Basic hand tools and attention to timing\/clearance are required; follow safety steps like disconnecting the spark plug and supporting the flywheel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: socket set, screwdrivers, flywheel puller if needed, torque wrench.\u003c\/li\u003e\n  \u003cli\u003eTake note of coil-to-flywheel air gap and any timing marks during reassembly.\u003c\/li\u003e\n  \u003cli\u003eWhen in doubt, consult a service manual or a qualified technician for correct torque and gap settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Hipa stator suits DIY lawn mower owners, small-engine repair shops, and maintenance techs who need a factory-style replacement for Kohler-powered walk-behinds, zero-turn mowers and residential tractors—especially John Deere LX\/STX owners—looking to restore charging and ignition functionality without reworking the engine wiring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this stator replace part number 237878?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Hipa 237878-S is a replacement for 237878 and multiple Kohler\/MTD OEM references; confirm your engine model before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install it myself on a John Deere LX176?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if you have basic small-engine tools and follow safety steps; check connector and mounting fit for a straightforward swap.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832462487892,"sku":"B08Q4D1NNX","price":51.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-stator-front-view.jpg?v=1787029709"},{"product_id":"hipa-rancher-tune-up-kit-for-husqvarna-50-51-55-carburetor-ignition-coil-air-filter","title":"Hipa Rancher Tune-Up Kit for Husqvarna 50\/51\/55 — Carburetor, Ignition Coil \u0026 Air Filter","description":"\u003cp\u003e\u003cstrong\u003eHipa 55 51 Rancher Tune-Up Kit is a complete replacement set containing a carburetor, ignition coil, air filter, fuel parts and spark plug to restore starting and running on Husqvarna Rancher 50\/51\/55 chainsaws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Husqvarna Rancher saw is hard to start, runs unevenly, or leaks fuel, replacing worn ignition, fuel and air components often fixes the problem faster and cheaper than a full service. This Hipa kit groups the compatible carburetor (WT-170-1 \/ 503281504), ignition coil (replaces Husq# 544018401 and related numbers), air filter (503608301) and essentials into one rebuild package designed for 50\/51\/55 Rancher model years listed in the compatibility notes.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts come in the Hipa Rancher 55\/51 rebuild kit and why they matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a complete carburetor assembly, ignition coil, replacement air filter, fuel filter, fuel line, carburetor gasket and a spark plug. Each component targets a common failure point: the carburetor meters fuel\/air, the coil provides a strong spark, and the filter keeps debris out of the engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarburetor WT-170-1 \/ 503281504 — restores correct fuel metering and idling.\u003c\/li\u003e\n  \u003cli\u003eIgnition coil (fits Husq# variants like 544018401) — improves spark reliability for consistent starts.\u003c\/li\u003e\n  \u003cli\u003eAir filter 503608301 — protects the engine from dust and sawdust ingestion.\u003c\/li\u003e\n  \u003cli\u003eFuel filter, line, gasket, spark plug — ensure clean fuel delivery and correct sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Husqvarna Rancher models and years are compatible with this kit?\u003c\/h3\u003e\n\u003cp\u003eHipa specifies fitment for many Rancher 50, 51 and 55 chainsaws from the early 1990s through mid-1990s. Check the model and production dates stamped on your saw to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: Rancher 55 and 51 models in several production ranges (1990–1994 variants listed).\u003c\/li\u003e\n  \u003cli\u003eCompatible parts referenced: WT-170, 503281504 carburetors and ignition coil numbers including 544018401.\u003c\/li\u003e\n  \u003cli\u003eNote: Not compatible with Rancher 55 (1991-10) model number 505316751 — verify your serial\/model tag.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing this kit affect saw performance and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstalling these parts typically improves cold-start behavior, steadier idling, consistent throttle response, and reduces misfires caused by weak spark or clogged filters. It also reduces the need for interim troubleshooting by replacing multiple wear items at once.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBetter starting due to a new ignition coil and fresh spark plug.\u003c\/li\u003e\n  \u003cli\u003eSmoother running with a rebuilt carburetor and new fuel filter\/line.\u003c\/li\u003e\n  \u003cli\u003eLonger engine life and fewer clogs thanks to a new air filter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? If you own a Husqvarna Rancher 50, 51 or 55 chainsaw from the compatible year ranges and are experiencing hard starting, rough idle, fuel leaks, or weak throttle response, this Hipa rebuild kit provides a cost-effective way to return the saw to reliable operation without buying OEM parts separately. It's suited for homeowners, landscape professionals, and small saw repair shops comfortable performing basic carburetor and ignition swaps. Always verify your model number and consult a service manual or technician if you are unsure about installation steps or safety procedures.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my Husqvarna Rancher 55?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This kit fits many Rancher 55 and 51 models from 1990–1994; confirm your exact model\/production code—it does not fit 55 model 505316751.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed to rebuild the carburetor and ignition?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the kit contains carburetor, ignition coil, air filter, fuel filter, fuel line, gasket and spark plug for a full tune-up.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832516227412,"sku":"B0DMWJ453T","price":51.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-packaging-rancher-kit.jpg?v=1787030539"},{"product_id":"hipa-carburetor-for-kohler-command-cv13-cv16-engines-cv15s-direct-fit-replacement-with-air-fuel-filter","title":"Hipa Carburetor for Kohler Command CV13–CV16 Engines — CV15S Direct-Fit Replacement with Air \u0026 Fuel Filter","description":"\u003cb\u003eHipa CV15S carburetor is a direct-fit replacement for select Kohler Command CV13–CV16 small engines, supplied complete with compatible air and fuel filter references.\u003c\/b\u003e\n\n\u003cp\u003eIf your Kohler-powered mower, generator, or utility machine is running rough, hard to start, or idling poorly, a worn or clogged carburetor is often the cause. This Hipa CV15S unit is designed to match the fit and function of original Kohler carburetors used on a range of CV-series engines. It includes the correct mounting pattern, throttle linkage points, and fuel inlet orientation to simplify installation and restore consistent fuel delivery when paired with the recommended filters and spark plug references.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Kohler engines and part numbers does this replace?\u003c\/h3\u003e\n\u003cp\u003eThe Hipa CV15S is compatible with many Kohler Command CV engines and replaces a variety of OEM part numbers for easy cross-reference. Confirm your engine model and serial number against the list before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Kohler models: CV13, CV14, CV15, CV15S, CV16, CV16S and multiple CH-series variants.\u003c\/li\u003e\n  \u003cli\u003eCommon OEM replacement numbers: 1285395-S, 12-853-58, 12-853-95-S, 12-853-83, 12-853-08.\u003c\/li\u003e\n  \u003cli\u003eAlso covers Kohler model stamping codes like CH15S-44525, CH16S-45509, CV14S-14107, CV15S-41537, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and compatibility work for a DIY repair?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with small engine maintenance; basic hand tools are typically all that’s required. Always disconnect the fuel and battery sources, and compare the mounting holes and linkage geometry to your old carburetor before bolting it on.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove fuel line and throttle cable, then swap the carburetor in place of the original.\u003c\/li\u003e\n  \u003cli\u003eCheck gasket sealing surfaces and replace gaskets if needed to avoid air leaks.\u003c\/li\u003e\n  \u003cli\u003eUse the recommended air filter (12-883-10-S1 \/ 12 083 12-S \/ 12 083 10-S), fuel filter (25 050 22-S), and spark plug (12 132 02-S) where applicable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance improvements should I expect after replacement?\u003c\/h3\u003e\n\u003cp\u003eA correctly matched carburetor helps return fuel metering to factory behavior, improving starting, idle stability, and throttle response. Results depend on overall engine condition and whether related consumables are fresh.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother cold starts and faster warm-up.\u003c\/li\u003e\n  \u003cli\u003eMore consistent idle and reduced stalling under light load.\u003c\/li\u003e\n  \u003cli\u003eImproved throttle response for mower decks and attachments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat checks should I do before ordering to ensure the right part?\u003c\/h3\u003e\n\u003cp\u003eBecause small-engine parts have many similar variants, verify model numbers stamped on the engine housing and compare the existing carburetor’s mounting orientation to photos. Review the fitment list in the product details to prevent returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm engine model (CV13–CV16 or CH-series listed) and serial when possible.\u003c\/li\u003e\n  \u003cli\u003eCompare OEM part numbers printed on your old carburetor to those in the replacement list.\u003c\/li\u003e\n  \u003cli\u003eInspect throttle linkage, choke lever location, and fuel inlet position for match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis Hipa CV15S carburetor is best for homeowners, landscapers, and small-engine technicians who repair Kohler Command engines on lawn mowers, pressure washers, generators, and similar equipment. If you maintain your own gear and need a reliable aftermarket replacement that cross-references standard Kohler part numbers and recommended filters, this unit is engineered to provide direct-fit convenience and restore dependable fuel flow when installed correctly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this carburetor fit my Kohler CV15S engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your engine is a listed CV13–CV16 or matching CH series and OEM numbers align. Compare mount and linkage before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include air and fuel filters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The listing references compatible filter part numbers but typically ships as the carburetor only; purchase filters separately if needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832583958868,"sku":"B0DMVCJTRJ","price":49.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-cv15s-front-view.jpg?v=1787031446"},{"product_id":"hipa-carburetor-for-kohler-command-engines-12-853-93s-with-tune-up-kit-gaskets-spark-plug-fuel-filter","title":"Hipa carburetor for Kohler Command engines 12-853-93S with tune-up kit — gaskets, spark plug, fuel filter","description":"\u003cp\u003e\u003cstrong\u003eHipa 12 853 93-S is a direct-fit replacement carburetor for many Kohler Command CV and CH small engines, supplied with gaskets, a spark plug and a fuel filter for a basic tune-up.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your lawn mower or small engine is running rough, stalling, or using fuel inefficiently, a worn or clogged carburetor is often the cause. This Hipa unit is manufactured to match the mounting and fuel\/air passages of Kohler models such as CV12.5, CV14, CV15, CV16S and several CH\/CV variations, and it ships with a small tune-up bundle to simplify installation and return the engine to reliable operation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Kohler engines will this carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThe Hipa 12 853 93-S is built to be compatible with a broad range of Kohler Command CV and CH engines. It covers specific model numbers across CV12.5, CV14, CV15, CV16S and CH series where the original part numbers match the listed replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits engines: CV12.5-1235\/1247, CV14 (1408, 1430, 1436, 1438, 1443, 1445, 1446, 1451, 1453, 1458), CV15 (41508, 41514), CV15S and CV16S ranges.\u003c\/li\u003e\n  \u003cli\u003eAlso fits CH11S, CH13S, CH14S, CH15GS, CH15S and CV493S\/CV493T series where applicable.\u003c\/li\u003e\n  \u003cli\u003eReplaces Kohler reference numbers including 1285395-S, 12-853-58, 12-853-95-S, 12-853-83 and 12-853-08.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and why it matters?\u003c\/h3\u003e\n\u003cp\u003eHipa includes a small tune-up kit with the carburetor so you can address the most common installation needs without extra trips to the parts store. These items help ensure a correct seal and clean ignition\/fuel delivery when fitting the replacement carburetor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x replacement carburetor built to Kohler mounting dimensions.\u003c\/li\u003e\n  \u003cli\u003e2x gaskets for intake and mounting to prevent air and fuel leaks.\u003c\/li\u003e\n  \u003cli\u003e1x spark plug to replace an old or fouled plug and restore ignition reliability.\u003c\/li\u003e\n  \u003cli\u003e1x inline fuel filter to keep debris from entering the new carburetor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will installing this carburetor affect engine performance?\u003c\/h3\u003e\n\u003cp\u003eA fresh, correctly sized carburetor can restore smooth idling, steady throttle response and more consistent starting. While outcomes vary by engine condition, replacing a damaged or gummed carburetor is a common, practical step in resolving fuel-related running issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves throttle response by restoring correct fuel\/air mixture control.\u003c\/li\u003e\n  \u003cli\u003eReduces stalling and rough idling if the old carburetor was clogged or leaking.\u003c\/li\u003e\n  \u003cli\u003eWorks best when installed with fresh gaskets, filter and spark plug from the kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic small-engine maintenance. Typical steps include removing the air cleaner, disconnecting fuel lines, swapping the old carburetor for the new one, replacing gaskets and reconnecting lines and throttle linkages.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires basic hand tools: screwdrivers, sockets\/wrenches, pliers and possibly clamps.\u003c\/li\u003e\n  \u003cli\u003eDrain or clamp the fuel line before disconnection to avoid spills.\u003c\/li\u003e\n  \u003cli\u003eAdjust idle and mixture per the engine manual after installation if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Hipa's 12 853 93-S carburetor and tune-up kit are intended for homeowners, landscapers and small-engine technicians replacing a faulty carburetor on compatible Kohler Command engines. Choose this kit when you need a cost-effective replacement that includes essential consumables to complete a basic tune-up and get the mower or equipment back into dependable service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this replace my Kohler part number 12-853-95-S?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Hipa 12 853 93-S is listed as a replacement for Kohler part 12-853-95-S.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything to install the carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes the carburetor, two gaskets, one spark plug and one fuel filter; basic hand tools are not included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832584122708,"sku":"B0DMVCHRYJ","price":50.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-carburetor-front-view_da7d801b-64ca-4d0a-ad0d-848570cf6d81.jpg?v=1787031452"},{"product_id":"hipa-replacement-carburetor-for-ryobi-212cc-generators-ry903600-fit-includes-spark-plug-gaskets","title":"Hipa Replacement Carburetor for Ryobi 212cc Generators — RY903600 Fit, Includes Spark Plug \u0026 Gaskets","description":"\u003cp\u003e\u003cstrong\u003eHipa RY903600 carburetor assembly replaces Ryobi DP242852 and Homelite 16100-Z300410-0099 to restore fuel delivery for Ryobi 212cc 3600–4500W inverter and easy-start generators.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ryobi inverter or conventional generator is running poorly, hard to start, or flooding, the carburetor is often the culprit. This Hipa replacement kit is engineered to match the fit and function of OEM part numbers Ryobi RY903600, DP242852, and Homelite 16100-Z300410-0099. The package arrives with the carburetor, a compatible spark plug, and three gaskets so you can install and seal the unit right away.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my Ryobi 212cc inverter generator?\u003c\/h3\u003e\n\u003cp\u003eYes, this Hipa carburetor is designed for Ryobi inverter generators that use the RY903600 part number series. Confirm your engine model and part number before purchasing to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Ryobi part numbers RY903600 and DP242852.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Homelite 16100-Z300410-0099 equivalent.\u003c\/li\u003e\n  \u003cli\u003eSuitable for Ryobi 212cc generators rated near 3600W and some 4500W easy-start models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships complete with the carburetor, one spark plug, and three gaskets so you have the main sealing parts for an installation. Basic hand tools and a clean workspace are all you need to swap the component.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: carburetor, spark plug, and three gaskets for intake and cover sealing.\u003c\/li\u003e\n  \u003cli\u003eTools required: screwdrivers, socket set, and pliers for fuel line clamps.\u003c\/li\u003e\n  \u003cli\u003eOptional: carb cleaner and a small brush to prepare mating surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does replacing the carburetor improve generator performance?\u003c\/h3\u003e\n\u003cp\u003eA fresh carburetor restores correct fuel\/air mixture and reliable idle, reducing hard starts, sputtering, or fuel leaks caused by worn needles, seats, or gaskets. Installing the new assembly helps return consistent power output and smoother operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates fuel leaks from degraded seals and gaskets.\u003c\/li\u003e\n  \u003cli\u003eRestores correct idle and acceleration by renewing internal components.\u003c\/li\u003e\n  \u003cli\u003eIncludes a new spark plug to support reliable ignition after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there installation tips to avoid returns or damage?\u003c\/h3\u003e\n\u003cp\u003eDouble-check your generator model and part number to reduce the chance of ordering the wrong part. Clean mating surfaces, replace all gaskets included, and hand-tighten bolts before final torque to prevent leaks or warping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify engine model and OEM part numbers prior to purchase.\u003c\/li\u003e\n  \u003cli\u003eClean old gasket material completely before fitting new gaskets.\u003c\/li\u003e\n  \u003cli\u003eInspect fuel lines and clamps and replace if hardened or cracked.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Hipa replacement carburetor kit is intended for DIY owners and small-engine technicians maintaining Ryobi inverter or easy-start generators in the 212cc range. It suits anyone troubleshooting poor starting, inconsistent idle, or fuel leakage who wants a direct-replacement part that includes necessary gaskets and a spark plug for a straightforward repair.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace Ryobi DP242852?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Hipa RY903600 carburetor is a compatible replacement for Ryobi DP242852 and related OEM numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are gaskets and spark plug included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes one spark plug and three gaskets so you can install the carburetor immediately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832643137876,"sku":"B096RQGPR9","price":51.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-carburetor-front-view_92e731e8-1c42-4476-bf09-3882c5b76fb6.jpg?v=1787032184"},{"product_id":"hipa-20-inch-chainsaw-chain-3-pack-3-8-inch-pitch-050-gauge-70-drive-links-full-chisel","title":"Hipa 20-inch Chainsaw Chain 3-Pack — 3\/8 inch Pitch .050 Gauge, 70 Drive Links, Full-Chisel","description":"\u003cp\u003e\u003cstrong\u003eHipa 20-inch replacement chainsaw chain — 3\/8\" pitch, .050\" gauge, 70 drive links, supplied as a pack of three compatible with Poula Pro PR5020-series and many CS-model saws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a reliable replacement cutting chain for a 20\" bar, this Hipa set offers full-chisel cutters sized to 3\/8\" pitch and .050\" gauge with 70 drive links. The package contains three identical chains so you can swap spares quickly at job sites or keep a spare for seasonal work. These chains match common OEM part numbers for Poulan\/related models and are intended as direct-fit replacements when pitch, gauge and drive-link count align.\u003c\/p\u003e\n\n\u003ch3\u003eWill this chain fit my Poulan or compatible saw?\u003c\/h3\u003e\n\u003cp\u003eFit depends on three measurements: pitch, gauge and the number of drive links. This Hipa chain is built to 3\/8\" pitch, .050\" gauge and 70 drive links — check your bar or old chain to confirm these numbers before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many Poulan \/ compatible models such as PR5020, PP5020AV, and a wide range of CS-series saws listed in product specs.\u003c\/li\u003e\n  \u003cli\u003eMatches OEM reference numbers like E70, D70 and 72LPX070G for direct interchangeability.\u003c\/li\u003e\n  \u003cli\u003eWorks on 20\" guide bars designed for 70-link chains with .050\" gauge drive slots.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the chain perform during regular cutting tasks?\u003c\/h3\u003e\n\u003cp\u003eThese chains have full-chisel cutters for efficient wood removal and consistent bite, making them effective for firewood, pruning and general timber cutting. Proper tensioning, a sharp file or grinder and routine lubrication will maintain performance and safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-chisel design delivers faster, more aggressive cutting on clean wood.\u003c\/li\u003e\n  \u003cli\u003eDurable steel construction resists wear under normal use conditions.\u003c\/li\u003e\n  \u003cli\u003eA pack of three lets you rotate chains to keep cutting without downtime.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installation and use?\u003c\/h3\u003e\n\u003cp\u003eConfirm your saw’s requirements and inspect the bar nose, sprocket and tensioner compatibility before fitting a new chain. Always follow the saw manufacturer’s instructions for chain installation, tensioning and safety procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify your bar accepts .050\" gauge drive links and that the sprocket matches a 3\/8\" pitch chain.\u003c\/li\u003e\n  \u003cli\u003eEnsure correct chain rotation direction and final tension per the owner's manual.\u003c\/li\u003e\n  \u003cli\u003eReplace or file cutters and rivets as needed; keep the bar groove and oil ports clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there packaging or part-number notes I should know?\u003c\/h3\u003e\n\u003cp\u003ePackaging for this Hipa chain is being updated; you might receive either the new or original pack, with identical chain quality. Because several 20\" chains exist with similar specs, confirm drive-link count, pitch and gauge rather than relying only on model compatibility lists.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduct may ship in upgraded or older packaging; function remains the same.\u003c\/li\u003e\n  \u003cli\u003eDouble-check 70 drive links, 3\/8\" pitch and .050\" gauge before ordering.\u003c\/li\u003e\n  \u003cli\u003eCompatible with OEM references like 72EXL070G, M72LPX070G and similar codes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This triple-pack of Hipa 20\" chains is intended for homeowners, landscapers and pro users who operate Poulan\/compatible saws that require a 3\/8\" pitch, .050\" gauge chain with 70 drive links. It’s a practical choice if you want spare chains on hand to minimize downtime, replace worn chains affordably, or keep matching chains for consistent cutting behavior across projects.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain fit a 20\" Poulan PR5020?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your saw uses a 3\/8\" pitch, .050\" gauge chain with 70 drive links, this Hipa chain fits PR5020-compatible bars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many chains come in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The product ships as a pack of three identical 20\" chains, giving you spares for fast replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832725549396,"sku":"B0DWF64CWG","price":66.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-packaging-3-chains.jpg?v=1787033125"},{"product_id":"hipa-xt1-lt42-oil-change-kit-for-cub-cadet-xt1-enduro-lt42-kohler-5400-series-fit-includes-air-oil-filters","title":"Hipa XT1 LT42 Oil Change Kit for Cub Cadet XT1\/Enduro LT42 — Kohler 5400‑series Fit, Includes Air \u0026 Oil Filters","description":"\u003cstrong\u003eHipa's XT1 LT42 Oil Change Kit is a complete maintenance bundle that replaces the Kohler 5400-series consumables—air filters, oil filter, pre-cleaner, fuel filter, and spark plug—to keep your Cub Cadet XT1\/LT42 mower running reliably.\u003c\/strong\u003e\n\n\u003cp\u003eThis all-in-one kit is made to match the common replacement parts used on Kohler KS530, KS540, KS590 and KS595 engines found in Cub Cadet XT1 and Enduro LT42 lawn tractors. Instead of sourcing individual components, the Hipa kit groups the specific air filters (22 083 01-S \/ 22 883 01-S1), oil filter, pre-cleaner, fuel filter and spark plug into one convenient package engineered for fit and durability.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and mower models will this Hipa kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit targets Kohler 5400-series engines commonly installed in Cub Cadet XT1 and Enduro LT42 tractors. Check your engine's model number against the listed Kohler part cross-references before purchasing to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with KS530, KS540, KS590 and KS595 engine variants.\u003c\/li\u003e\n  \u003cli\u003eDesigned for Cub Cadet XT1, Enduro and LT42 tractor models using Kohler 5400-series engines.\u003c\/li\u003e\n  \u003cli\u003eIncludes OEM-equivalent part numbers for quick verification against your engine label.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and why they matter for maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe kit packages every routine consumable needed for a standard tune-up: primary and secondary air filters, oil filter, pre-cleaner, fuel filter and spark plug. Replacing these items regularly helps the engine breathe cleaner, run smoother and maintain fuel delivery, which supports steady performance during the mowing season.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAir filters: 22 083 01-S and 22 883 01-S1 to trap dirt and debris before it reaches the carburetor and cylinders.\u003c\/li\u003e\n  \u003cli\u003eOil filter: KH-12-050 series for effective oil filtration to protect engine bearings and components.\u003c\/li\u003e\n  \u003cli\u003ePre-cleaner and fuel filter: extend air filter life and ensure clean fuel flow to the engine.\u003c\/li\u003e\n  \u003cli\u003eSpark plug: NGK-equivalent DCPR6E-style plug for reliable ignition and easier starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm the correct part before ordering?\u003c\/h3\u003e\n\u003cp\u003eBecause engine variants and production runs differ, always match the part numbers on your engine's decal with the kit's cross-reference list. This quick check reduces returns and ensures the parts fit and perform as expected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLocate your Kohler engine model and serial on the mower's engine housing.\u003c\/li\u003e\n  \u003cli\u003eCompare those numbers to the listed Kohler cross-references included with the Hipa kit.\u003c\/li\u003e\n  \u003cli\u003eWhen in doubt, photograph the engine label and consult the seller or a dealer for verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace these parts during regular upkeep?\u003c\/h3\u003e\n\u003cp\u003eReplace air and fuel filters, oil filter and spark plug based on hours of use and operating conditions—usually every season or after a specified number of run hours. Heavy-dust or dirty conditions typically call for more frequent changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAir filters: inspect every 25 hours; replace annually or sooner in dusty environments.\u003c\/li\u003e\n  \u003cli\u003eOil and oil filter: change with every oil service interval as recommended by Kohler.\u003c\/li\u003e\n  \u003cli\u003eFuel filter and spark plug: inspect at the start of season; replace as part of annual tune-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hipa XT1 LT42 Oil Change Kit is aimed at DIY homeowners and small-property caretakers who want a single, vetted package of Kohler 5400-series replacement parts for Cub Cadet XT1, Enduro and LT42 tractors. It’s also suitable for small service shops and landscapers who prefer stocking a reliable multi-part kit rather than ordering individual pieces. Before ordering, verify your engine model number to ensure the correct fit for your mower.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this Hipa kit fit my Cub Cadet XT1 LT42?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your engine model (Kohler KS530\/KS540\/KS590\/KS595) against the kit’s cross-reference list to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include the correct spark plug and fuel filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit contains an NGK-equivalent spark plug and a fuel filter compatible with 1\/4\" and 5\/16\" lines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832900268372,"sku":"B0BLV6HHCH","price":48.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-xt1-lt42-front-packaging.jpg?v=1787035127"},{"product_id":"hipa-20-chainsaw-chain-3-8-pitch-050-gauge-70l-2-pack-full-chisel-for-echo-cs-590-poulan","title":"Hipa 20\" Chainsaw Chain 3\/8\" Pitch .050\" Gauge 70L — 2-Pack Full-Chisel for Echo CS-590 \u0026 Poulan","description":"\u003cp\u003e\u003cstrong\u003eThe Hipa CS-590 20-inch replacement chainsaw chain is a 70-drive-link, full-chisel 3\/8\" pitch bar chain (.050\" gauge) designed to fit Echo CS-590 and many Poulan, McCulloch and equivalent models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis premium two-pack offers an affordable way to restore cutting performance on 20\" guide bars used for yard work, storm cleanup and light commercial tasks. The CS-590 chain is manufactured to match common OEM specifications—3\/8\" pitch, .050\" gauge and 70 drive links—with hardened, blued cutters that resist corrosion and maintain edge life when sharpened and maintained properly. Before ordering, confirm your saw’s pitch, gauge and number of drive links to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWill this chain fit my Echo, Poulan or McCulloch saw?\u003c\/h3\u003e\n\u003cp\u003eCompatibility hinges on three measurements: pitch, gauge and drive link count. The Hipa CS-590 is built to replace many 20\" OEM chains specified as 3\/8\" pitch, .050\" gauge and 70 drive links, including common Oregon and manufacturer part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePitch: 3\/8\"\u003c\/li\u003e\n  \u003cli\u003eGauge: .050\" (1.27 mm)\u003c\/li\u003e\n  \u003cli\u003eDrive links: 70\u003c\/li\u003e\n  \u003cli\u003eMatches numerous OEM numbers such as Oregon E70, 72LPX070G and equivalents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the full-chisel cutter style affect cutting performance?\u003c\/h3\u003e\n\u003cp\u003eFull-chisel cutters produce faster, more aggressive cuts than semi-chisel designs, making them well-suited for felling and crosscutting soft and seasoned wood. They excel at rapid production but require more frequent sharpening and careful use around dirt or abrasive materials to preserve the teeth.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast, efficient cutting on clean wood\u003c\/li\u003e\n  \u003cli\u003eSharpen more often than semi-chisel chains\u003c\/li\u003e\n  \u003cli\u003eBest avoided for dirty, frozen or abrasive conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and safety steps should I follow?\u003c\/h3\u003e\n\u003cp\u003eRegular maintenance keeps the chain cutting efficiently and extends service life. Check tension, lubricate the bar and chain, and inspect for damage before each use. Replace or sharpen the cutters when they become dull, and always wear required PPE while operating the saw.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSet proper tension — not too tight or loose\u003c\/li\u003e\n  \u003cli\u003eKeep the bar groove and oil ports clean\u003c\/li\u003e\n  \u003cli\u003eSharpen or replace dull cutters; balance left and right teeth\u003c\/li\u003e\n  \u003cli\u003eUse eye, ear and hand protection during operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many chains are included and what makes this pack a smart buy?\u003c\/h3\u003e\n\u003cp\u003eThis listing supplies two complete 20\" chains, which reduces downtime during busy seasons and gives a ready spare for extended projects. Buying a two-pack can save you from halting work to order a replacement and often costs less per chain than single purchases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes two 20\" chains (70 drive links each)\u003c\/li\u003e\n  \u003cli\u003eSpares ready for quick swap-outs on site\u003c\/li\u003e\n  \u003cli\u003eCost-effective compared with buying chains individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Hipa CS-590 20-inch chain is ideal for homeowners, landscapers and occasional commercial users who operate Echo CS-590 and similar models or any saw requiring a 3\/8\" pitch, .050\" gauge, 70-drive-link chain. Choose this set if you want fast-cutting, OEM-compatible replacements with corrosion-resistant cutters and the convenience of a spare chain included.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain fit Echo CS-590?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits Echo CS-590 when your saw uses a 20\" bar with 3\/8\" pitch, .050\" gauge and 70 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I sharpen the full-chisel cutters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sharpening frequency depends on use; inspect after heavy jobs and sharpen whenever cutting slows or produces fine sawdust instead of coarse chips.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832900825428,"sku":"B0BJ87W6L9","price":46.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-cs590-front-packaging.jpg?v=1787035151"},{"product_id":"hipa-carburetor-kit-for-husqvarna-122-series-complete-pre-tuned-replacement-kit-with-tool-fuel-parts","title":"Hipa Carburetor Kit for Husqvarna 122-Series — Complete Pre‑Tuned Replacement Kit with Tool \u0026 Fuel Parts","description":"\u003cp\u003e\u003cstrong\u003eHipa 581734301 is a complete aftermarket carburetor kit designed to replace the factory carburetor on Husqvarna 122-series trimmers and edgers, delivering a ready-to-install assembly plus tuning and fuel-line parts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit includes the Hipa carburetor built to the original mounting and bore dimensions, an adjusting tool, filters, fuel lines, primer bulbs and gaskets so you can replace a worn or leaking unit without hunting for individual parts. The kit is manufactured with brass and anodized aluminum components and wet-flow tested to mirror real engine conditions. Below you'll find clear answers to common buyer questions about fit, installation, materials, and what the package contains.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my Husqvarna 122C, 122LD, 122LDX or 122LK?\u003c\/h3\u003e\n\u003cp\u003eYes — the Hipa 581734301 is sized to match Husqvarna 122-series models that use the 581734301 or 574386701 carburetor part numbers. It follows the original mounting pattern and fuel line diameters so it installs in place of the factory unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Husqvarna 122C, 122LD, 122LDX, 122LK trimmers and edgers.\u003c\/li\u003e\n  \u003cli\u003eMounting hole center-to-center: 31 mm for direct bolt-up.\u003c\/li\u003e\n  \u003cli\u003eThrottle bore: 12.5 mm; choke bore: 16 mm; fuel line diameter: 4 mm.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part numbers 581734301 and 574386701.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the kit include and how does it save time?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains everything typically needed to remove the old carburetor and fit the new one without multiple orders. You get the carburetor pre-tuned at the factory plus essential consumables that often fail with age.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHipa carburetor x1 and aftermarket adjusting tool x1 (MPN: 530035560 style).\u003c\/li\u003e\n  \u003cli\u003eFuel filter x1, one-foot fuel lines x2, primer bulbs x2 and gaskets x2.\u003c\/li\u003e\n  \u003cli\u003eArrives ready to run — factory-set to minimize initial tuning.\u003c\/li\u003e\n  \u003cli\u003eAll parts packaged together to reduce downtime and shipping costs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is this replacement carburetor?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses corrosion-resistant materials and undergoes wet-flow testing to approximate operating conditions, improving confidence in performance and longevity. Brass fittings, composite diaphragms, and an anodized aluminum body reduce wear compared with cheaper, untested parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterials: brass components, rubber composite diaphragms, anodized aluminum body.\u003c\/li\u003e\n  \u003cli\u003eWet flow tested to simulate fuel flow under load.\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist heat, corrosion, and routine wear.\u003c\/li\u003e\n  \u003cli\u003eManufactured to match OEM dimensions for predictable operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and do I need to tune it?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with small engine maintenance: disconnect fuel lines, remove the old carburetor, swap gaskets, and bolt the Hipa unit in place. The carburetor is factory tuned and includes an adjusting tool if fine-tuning is required after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic tools required: screwdriver, pliers, possibly a socket for mounting bolts.\u003c\/li\u003e\n  \u003cli\u003eIncludes adjusting tool for idle and mixture tuning if needed.\u003c\/li\u003e\n  \u003cli\u003ePrimer bulbs and new fuel lines included to ensure fuel supply integrity.\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer safety guidance; allow a cool engine before working.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Hipa carburetor kit is aimed at homeowners, landscapers, and small-engine technicians who need a reliable replacement for Husqvarna 122-series trimmers and edgers. It’s especially useful if the original carburetor is leaking, the engine runs irregularly, or you want a single package with all necessary consumables to complete the repair quickly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace OEM part 581734301?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Hipa 581734301 kit is a direct replacement for OEM 581734301 and 574386701 on compatible Husqvarna 122 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are fuel lines and primer bulbs included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit includes two fuel lines, two primer bulbs, a fuel filter, gaskets, and an adjustment tool.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832900759892,"sku":"B0BJ6DW5TK","price":46.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-carburetor-front-view_250b0fd4-20af-4843-a3f4-3d31b193d232.jpg?v=1787035156"},{"product_id":"hipa-20-inch-chainsaw-chain-3-8-in-pitch-050-gauge-72-link-3-pack-full-chisel","title":"Hipa 20-Inch Chainsaw Chain — 3\/8 in Pitch .050 Gauge, 72-Link 3-Pack Full-Chisel","description":"\u003cp\u003e\u003cstrong\u003eHipa 20-inch replacement chainsaw chain with 3\/8\" pitch, .050\" gauge and 72 drive links — a direct-fit, full-chisel cutter designed to match Husqvarna, Stihl and Oregon specs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your saw needs a reliable chain that mirrors OEM dimensions, this Hipa 20\" chain set is built to the same pitch, gauge and link count used by many popular Husqvarna and Stihl saws, plus it replaces common Oregon part numbers. Supplied as a 3-pack, each chain is full-chisel style for efficient cutting and straightforward fitment when the drive link count, pitch and gauge match your guide bar and sprocket. Always confirm your existing chain’s markings or measure before swapping to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this chain fits my chainsaw model?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on three measurements: pitch, gauge and drive link count. This Hipa chain is 3\/8\" pitch, .050\" gauge with 72 drive links — matching many 20\" guide bars from Husqvarna and several Stihl models. Cross-reference your old chain or the bar stamping to confirm a correct swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLook for markings on your existing chain or bar (e.g., 3\/8\", .050, 72 links).\u003c\/li\u003e\n  \u003cli\u003eCheck your saw manual or model online for recommended chain specifications.\u003c\/li\u003e\n  \u003cli\u003eMeasure the pitch by dividing the distance between three rivets by two if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat cutting style and performance can I expect?\u003c\/h3\u003e\n\u003cp\u003eThese chains use a full-chisel cutter profile, which delivers aggressive, fast cutting through green and dry wood when kept sharp. Full-chisel chains are favored for high-performance cutting but require careful maintenance and are less forgiving on dirty or frozen wood. Regular sharpening and correct tension extend both performance and life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-chisel teeth for fast, aggressive cutting.\u003c\/li\u003e\n  \u003cli\u003eBest used on clean, well-maintained bars and sharp teeth.\u003c\/li\u003e\n  \u003cli\u003eRequires routine sharpening and proper chain tensioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich OEM numbers and brands does this replace?\u003c\/h3\u003e\n\u003cp\u003eThe Hipa chain is manufactured to match the dimensions of several familiar OEM references so it can serve as a direct replacement in many cases. It corresponds to common Oregon and Stihl part numbers as well as Husqvarna link counts for 20\" bars. Always double-check the exact part number on your saw to avoid mismatches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many Husqvarna Rancher and compatible models using a 20\" bar and 72 drive links.\u003c\/li\u003e\n  \u003cli\u003eCross-replaces Oregon E72 \/ D72 and Stihl 33RS-72 style references.\u003c\/li\u003e\n  \u003cli\u003eWorks with a range of Stihl and Husqvarna models when pitch\/gauge\/links match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and care for these replacement chains?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires loosening the bar nuts, seating the chain on the sprocket and guide bar, then setting correct tension before tightening. After installation, maintain chain sharpness, correct tension and proper lubrication to maximize life and safety. Inspect sprocket and bar groove for wear and replace associated parts if they’re badly worn.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTension the chain so it snaps back into place with slight give when pulled by hand.\u003c\/li\u003e\n  \u003cli\u003eUse quality bar oil and check oil delivery at startup.\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters evenly and replace if teeth are damaged or overly worn.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This 3-pack of Hipa 20\" chains is aimed at homeowners, landowners and professional users who operate 20-inch chainsaws that accept 3\/8\" pitch, .050\" gauge chains with 72 drive links. It’s a cost-effective option for those who need multiple spare chains, perform routine maintenance, or want a quick replacement compatible with many Husqvarna, Stihl and Oregon-specified setups. If you’re uncertain, verify your current chain’s pitch, gauge and drive link count before purchasing to ensure a proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my Husqvarna 455 Rancher?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your saw uses a 20\" bar with 3\/8\" pitch, .050\" gauge and 72 drive links—confirm those markings first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this chain ready to use right out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the chain is ready to install but should be tensioned and lubricated before first use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56832927859028,"sku":"B0DW93GPXR","price":64.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-20in-chain-front-packaging.jpg?v=1787035353"},{"product_id":"hipa-carburetor-kit-for-honda-gcv160-engines-16100-z0l-853-fit-with-filters-gaskets","title":"Hipa Carburetor Kit for Honda GCV160 Engines — 16100-Z0L-853 Fit with Filters \u0026 Gaskets","description":"\u003cp\u003e\u003cstrong\u003eHipa's replacement carburetor kit delivers a ready-to-install Honda GCV160 carburetor plus filters, gaskets, and tune-up parts to restore reliable mower and small-engine performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Honda GCV160-powered mower, pressure washer, or walk-behind unit is running rough, hard to start, or leaking fuel, replacing the carburetor and worn service parts often solves the problem fast. This Hipa kit is built to fit Honda OE numbers 16100-Z0L-853, 16100-Z0L-852, 16100Z0L851 and 16100Z0L802 and includes the common air filter part numbers for the GCV160 family. The kit groups the carburetor with essential components so you get a complete tune-up in a single purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor physically fit my GCV160 engine model?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the Hipa carburetor is designed to match the mounting and port dimensions used across many GCV160 variants. The listing includes the specific Honda replacement numbers and a range of compatible model codes so you can verify fitment against your engine model before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Honda GCV160A\/GCV160LA and related suffixes (S1A, S3A, R3A, etc.).\u003c\/li\u003e\n  \u003cli\u003eFits many add-on machines: Troy-Bilt TB130 series, Ryobi 2800 PSI washers, select Husqvarna and Cub Cadet units.\u003c\/li\u003e\n  \u003cli\u003eMounting hole center-to-center: 44mm; throttle bore: 18mm; choke bore: 24.5mm.\u003c\/li\u003e\n  \u003cli\u003eCheck your old carburetor part number (16100-Z0L-853\/852\/851\/802) for direct match confirmation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how does it save me time?\u003c\/h3\u003e\n\n\u003cp\u003eThe Hipa package delivers a carburetor plus a set of service parts so you don’t have to source individual items. Everything needed for a basic carburetor swap and tune-up is included, reducing downtime and troubleshooting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne replacement carburetor pre-tuned at the factory for immediate use.\u003c\/li\u003e\n  \u003cli\u003eAir filter, pre-filter, fuel filter, spark plug, six gaskets, and a fuel shut-off valve.\u003c\/li\u003e\n  \u003cli\u003eCarburetor insulator and a zinc-plated float bowl for durability.\u003c\/li\u003e\n  \u003cli\u003eComes ready to install — minimal or no initial adjustment required in most cases.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable and durable is this aftermarket carburetor?\u003c\/h3\u003e\n\n\u003cp\u003eHipa constructs the carburetor from corrosion-resistant materials and tests flow to simulate real engine conditions. Those choices help the unit resist wear and maintain consistent fuel metering during operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass fittings, zinc-plated float bowl, and anodized aluminum body increase corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eHigh-density plastic float to reduce degradation from fuel exposure.\u003c\/li\u003e\n  \u003cli\u003eWet flow tested at the factory to verify fuel delivery under load.\u003c\/li\u003e\n  \u003cli\u003eDesigned to tolerate typical small-engine heat and vibration for longer service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation details and specs should I know before I begin?\u003c\/h3\u003e\n\n\u003cp\u003eHaving basic tools and a service manual for your machine model makes installation straightforward. Confirm mounting dimensions and fuel\/cable routing before removing the old carburetor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting hole spacing: 44mm (center to center).\u003c\/li\u003e\n  \u003cli\u003eFuel inlet line: 5mm diameter; venturi: 13mm.\u003c\/li\u003e\n  \u003cli\u003eThrottle bore: 18mm, choke bore: 24.5mm — useful for cross-reference.\u003c\/li\u003e\n  \u003cli\u003eIncludes gaskets and insulator to ensure a proper seal during replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Hipa carburetor kit is ideal for home mechanics, lawn care professionals, and DIYers with Honda GCV160-powered equipment who need a complete, cost-effective tune-up kit. It appeals to anyone wanting a single-package swap that supplies the carburetor plus common wear items — especially owners of mowers, pressure washers, and walk-behind units that list the GCV160 engine or the provided OE part numbers in their service documentation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace Honda part 16100-Z0L-853?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Hipa carburetor is made to replace Honda 16100-Z0L-853 and several related OE numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is an adjustment needed after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The carburetor ships factory tuned for most GCV160 engines, though minor idle or mixture tweaks may be needed per your engine manual.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56833159233876,"sku":"B0BKZL6344","price":46.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-carburetor-front-view_06ac840a-dba5-45ed-ae56-25de35eb3890.jpg?v=1787038378"},{"product_id":"hipa-095-2-4mm-heavy-duty-3-lb-round-trimmer-line-spool-black-with-line-cutter-commercial-strength-durability","title":"Hipa .095\" (2.4mm) Heavy-Duty 3 lb Round Trimmer Line Spool — Black with Line Cutter, Commercial-Strength Durability","description":"\u003cstrong\u003eHipa’s 3-pound .095\" heavy-duty round trimmer line on a spool supplies commercial-strength cutting performance and comes with a line cutter for fast, accurate reloads.\u003c\/strong\u003e\n\n\u003cp\u003eBuilt for landscapers and homeowners who want a reliable, long-lasting line, this 2.4mm (.095\") black round trimmer cord balances durability with smooth cutting. The spool holds three pounds of line—enough for multiple jobs—while the included cutter speeds spool changes and prevents wasted time at the worksite. Its round profile minimizes noise and resists breakage better than many square lines, making it a versatile choice across a wide range of gas-powered string trimmers.\u003c\/p\u003e\n\n\u003ch3\u003eWhich trimmers will this Hipa .095\" line work with?\u003c\/h3\u003e\n\u003cp\u003eThis spool is designed for universal compatibility with most gas-powered trimmers and brush cutters. It fits many hubs and can be adapted for common homeowner and commercial models when wound to the right spool size.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible examples: Troy-Bilt, Poulan, Ryobi, Echo, Craftsman, Black \u0026amp; Decker, and similar gas trimmers.\u003c\/li\u003e\n  \u003cli\u003eWorks with single- and dual-line heads that accept 0.095\" (2.4mm) diameter cord.\u003c\/li\u003e\n  \u003cli\u003eMay require simple rewinding for certain proprietary spool sizes; cutter included for neat, precise cuts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the round .095\" profile affect cutting and durability?\u003c\/h3\u003e\n\u003cp\u003eRound line offers a balance between cutting efficiency and longevity. Its smooth, circular cross-section slices through most weeds cleanly while reducing the chance of splintering or rapid wear found in lower-quality square lines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides consistent first-pass cuts on grass, light brush, and overgrowth.\u003c\/li\u003e\n  \u003cli\u003eThicker walls for reduced snapping under heavy use compared to thinner lines.\u003c\/li\u003e\n  \u003cli\u003eQuieter operation and less vibration than some aggressive-shaped cords.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat advantages does the 3-pound spool and included line cutter provide?\u003c\/h3\u003e\n\u003cp\u003eThe large spool supplies plenty of replacement line so you spend more time cutting and less time reloading. The integrated cutter makes trimming spool-lengths quick and accurate, resulting in cleaner installs and reduced waste.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree pounds of line supports multiple jobs or seasons, depending on usage intensity.\u003c\/li\u003e\n  \u003cli\u003eLine cutter ensures consistent lengths for balanced winding and fewer tangles.\u003c\/li\u003e\n  \u003cli\u003eBulk spool format is cost-effective versus buying many small prewound heads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use and store this heavy-duty trimmer line?\u003c\/h3\u003e\n\u003cp\u003eWind the correct amount of line into your trimmer head following the manufacturer’s spool capacity recommendations. Store the spool in a cool, dry place away from direct sunlight to maintain the polymer’s toughness and prevent early degradation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAvoid exposure to high heat or prolonged UV to preserve flexibility.\u003c\/li\u003e\n  \u003cli\u003eCut neat lengths with the supplied cutter to prevent feeding jams.\u003c\/li\u003e\n  \u003cli\u003eCheck your trimmer manual for recommended winding directions and capacity limits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Hipa’s 3-pound .095\" round trimmer line is ideal for property owners, professional landscapers, and maintenance crews who need a dependable, all-purpose cutting cord that lasts through demanding use. If you use gas-powered trimmers like Troy-Bilt, Poulan, Ryobi, Echo, Craftsman, or Black \u0026amp; Decker, and want a quieter, longer-lasting alternative to square line, this spool offers strong value and fewer reloads per season.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this .095\" line fit my Echo or Ryobi trimmer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this .095\" (2.4mm) line fits most gas trimmers including Echo and Ryobi; check your head's max diameter and spool capacity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is round line more durable than square line?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Round line typically lasts longer and cuts smoothly; square shapes may cut more aggressively but can wear faster.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56833160642900,"sku":"B08MFLFLPP","price":64.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-spool.jpg?v=1787038410"},{"product_id":"hipa-carburetor-and-air-filter-kit-for-brigg-strat-engines-594605-795115-direct-fit-replacement-tune-up-parts-included","title":"Hipa carburetor and air filter kit for Brigg Strat engines 594605 + 795115 — direct-fit replacement, tune-up parts included","description":"\u003cb\u003eHipa 594605 carburetor bundled with the 795115 air filter is a drop-in replacement kit to restore fuel delivery and filtration on compatible Brigg Strat small engines.\u003c\/b\u003e\n\n\u003cp\u003eThis Hipa combo pairs a direct-fit carburetor (MPN 594605) with a matched air filter (MPN 795115) and a small tune-up accessory set to simplify repairs on Brigg Strat 14.5–19.5 HP engines. The kit arrives with fuel line, gasket, fuel filter, spark plug, valve, and a pre-filter so you have the essential parts to install and run. It suits a wide range of engine models and is meant as a practical, hardware-focused solution for lawn mowers, pressure washers, generators, and similar outdoor power equipment that use Brigg Strat type components.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and models will this Hipa carburetor and air filter fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit fits many Brigg Strat engine variants commonly found on residential and light-commercial equipment. Compatibility includes 14.5–19.5 HP engines and a long list of engine codes and MPN cross-references, so verify against your engine tag. If your engine number or part number matches one of the listed codes, this kit is designed as a direct replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Brigg Strat carburetor MPNs: 594605, 594601, 595535, 593003, and others.\u003c\/li\u003e\n  \u003cli\u003eAir filter cross-references: 698083, 697014, 697634, 795115, 697153, 794422, 797008.\u003c\/li\u003e\n  \u003cli\u003eEngine fitment includes 31M977, 31N607, 31N677, 31P607 and many 31–33 series codes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit make installation easier for a homeowner mechanic?\u003c\/h3\u003e\n\u003cp\u003eThe Hipa package consolidates the primary wear items needed for a service into one box, minimizing additional parts hunting. The included gasket, fuel line, fuel filter, spark plug, valve and pre-filter reduce trip runs to the parts store and speed up reassembly. Basic hand tools and common mechanical skills are all you need to perform the swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with gasket and replacement fuel line to avoid trimming or extra purchases.\u003c\/li\u003e\n  \u003cli\u003eIncludes fuel filter and spark plug so ignition and fuel paths are serviced together.\u003c\/li\u003e\n  \u003cli\u003ePre-filter and air filter supplied to restore breathing and protect the carburetor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and maintenance benefits should I expect after fitting this replacement?\u003c\/h3\u003e\n\u003cp\u003eInstalling a fresh carburetor and new air filter helps restore consistent fuel metering and cleaner airflow, which can improve starting reliability and steady idling on affected engines. While results depend on overall machine condition, replacing worn parts removes common causes of rough running and fuel leaks. Routine inspection and using fresh fuel will help maintain those improvements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces worn or leaking carburetor to reduce fuel drip and flooding.\u003c\/li\u003e\n  \u003cli\u003eNew air filter prevents debris ingestion and supports steady combustion.\u003c\/li\u003e\n  \u003cli\u003eIncludes spark plug to refresh ignition for easier starts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there special tools or steps required to fit the Hipa 594605 kit?\u003c\/h3\u003e\n\u003cp\u003eMost installations require only standard hand tools: wrenches, screwdrivers, pliers, and optionally a torque wrench for fastener accuracy. Drain or isolate the fuel, label hoses before removal, and follow basic safety precautions. If your engine has aftermarket modifications, additional adjustments or tuning may be necessary after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic hand tools are sufficient for a straight replacement.\u003c\/li\u003e\n  \u003cli\u003eLabel hoses and note throttle\/choke linkages before disassembly.\u003c\/li\u003e\n  \u003cli\u003eTest-run and check for leaks after installation; adjust idle if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Hipa 594605 carburetor with 795115 air filter kit is aimed at DIY homeowners, small-business equipment technicians, and anyone maintaining Brigg Strat 14.5–19.5 HP engines who wants a consolidated replacement package. It’s useful when the current carburetor is leaking, the air filter is clogged, or when performing a mid-life tune-up to restore reliable starts and smoother running without sourcing multiple parts separately.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this carburetor fit my Brigg Strat engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your engine tag or part number against the listed MPNs and engine codes; if they match the kit’s compatibility list, it will fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes carburetor, air filter, pre-filter, fuel line, gasket, fuel filter, spark plug and valve—most home installs need no extra parts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56833373995348,"sku":"B0DJ2KQRJS","price":46.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-594605-front-view.jpg?v=1787040768"},{"product_id":"hipa-42-inch-high-lift-mower-blades-for-craftsman-husqvarna-poulan-pro-2-pack-5-point-star-mount","title":"Hipa 42-inch High-Lift Mower Blades for Craftsman Husqvarna Poulan Pro — 2-Pack, 5-Point Star Mount","description":"\u003cp\u003e\u003cstrong\u003eThese Hipa 532138971 high-lift mower blades are a direct-fit replacement set engineered for 42\" Craftsman, Husqvarna and Poulan Pro riding mower decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your lawn tractor needs a fresh set of blades for cleaner cuts and improved bagging performance, the Hipa 532138971 pair offers OEM-compatible fit and the specifications required for 42-inch decks. Made to match several original part numbers (including 138971, 138498 and 53-21278-43), these blades use a 5-point star center hole and lifted profile to move more air under the deck for stronger suction and better clippings dispersal. Each package includes two blades; cutting edges are factory-painted to resist rust during storage and to protect hands during installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mowers will these blades fit?\u003c\/h3\u003e\n\u003cp\u003eThese blades are designed for a wide range of 42-inch riding mower models from Craftsman, Husqvarna and Poulan Pro. Confirm the 5-point star center mount and 42\" compatible deck on your mower before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Craftsman models: LT1000, LT2000, T110, DLT3000, T2200, YT3000.\u003c\/li\u003e\n  \u003cli\u003eFits Husqvarna and Poulan Pro 42\" deck riding tractors that use the 5-point star mount.\u003c\/li\u003e\n  \u003cli\u003eCross-references: 138971, 532138971, 53-21384-98 and related OEM numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the blade dimensions and design features?\u003c\/h3\u003e\n\u003cp\u003eThese Hipa blades match the exact physical dimensions and profile expected for high-lift 42\" applications, delivering the airflow and cutting geometry needed for bagging and side-discharge performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 21\" (533 mm).\u003c\/li\u003e\n  \u003cli\u003eAir lift height: 1-1\/16\" (27 mm); width: 2-1\/4\" (57 mm); thickness: 5\/32\" (4 mm).\u003c\/li\u003e\n  \u003cli\u003eCenter mount: 5-point star hole for direct replacement of many OEM parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these high-lift blades affect mowing results?\u003c\/h3\u003e\n\u003cp\u003eThe high-lift profile increases under-deck suction, which helps lift grass before cutting and carries clippings more effectively into bags or through the discharge. You’ll notice improved bagging capacity and a cleaner cut pattern on most turf types when blades are sharp and installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStronger suction for better bagging and reduced clumping.\u003c\/li\u003e\n  \u003cli\u003eSmoother, more even grass cut when blades are balanced and sharp.\u003c\/li\u003e\n  \u003cli\u003ePainted edges reduce rust in storage and protect hands during handling; paint will wear with use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installation and how many blades come in a pack?\u003c\/h3\u003e\n\u003cp\u003eVerify that your mower’s deck supports a 42\" blade length and uses a 5-point star center hole; also ensure blade thickness and lift profile match manufacturer recommendations. The pack contains two replacement blades—typically enough for a two-blade 42\" deck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes two Hipa 532138971 high-lift blades.\u003c\/li\u003e\n  \u003cli\u003eCheck center hole shape and deck bolt pattern for compatibility.\u003c\/li\u003e\n  \u003cli\u003eWear gloves and follow mower manufacturer torque specs during fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners and small-property managers who own Craftsman, Husqvarna or Poulan Pro riding mowers with 42\" decks and need OEM-compatible high-lift blades for improved bagging and discharge. These blades suit users who want exact-fit replacements listed under several OEM numbers (138971, 53-21384-98, 532 13 84-98, etc.), value corrosion-protected edges for storage, and prefer the performance benefits of a high-lift profile for clean cuts and efficient grass handling.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these blades a direct replacement for Craftsman 42\" mowers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these Hipa 532138971 blades match OEM fit for many Craftsman 42\" models with a 5-point star mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many blades are included and what is the length?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The pack contains two blades, each 21 inches long (533 mm), sized for 42\" mower decks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56833379205460,"sku":"B0DJSR1WQJ","price":64.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-532138971-front-packaging-view.jpg?v=1787040814"},{"product_id":"hipa-42-lawn-mower-mulching-blades-for-craftsman-lt2000-lt1000-2-pack-high-lift-alloy-5-point-star","title":"Hipa 42\" Lawn Mower Mulching Blades for Craftsman LT2000\/LT1000 — 2-Pack High‑Lift Alloy, 5‑Point Star","description":"\u003cp\u003e\u003cstrong\u003eHipa 134149 mulching blades are heavy‑duty replacement blades designed for 42\" riding mower decks (Craftsman LT2000\/LT1000 and compatible Husqvarna\/Poulan models) that offer mulching, bagging and side‑discharge performance in one unit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese OEM‑style blades (cross‑references 134149, 532134149, 777134149, 422719) are made from hardened alloy steel and shaped for high lift and aggressive mulching. Each blade measures 21\" long, 2-1\/4\" wide and 9\/64\" thick with a 1-1\/16\" air lift, built to fit 42\" decks that use a 5‑point star center hole pattern. The blades come as a two‑pack and feature a protective edge coating to resist corrosion during storage and installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill these blades fit my Craftsman LT1000 or LT2000 mower?\u003c\/h3\u003e\n\u003cp\u003eThey fit many Craftsman LT1000 and LT2000 42\" deck tractors that use the 5‑point star spindle pattern. Compatibility depends on the center hole shape, not just model number, so visual confirmation is essential.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible cross‑refs: 134149, 532134149, 777134149, 422719\u003c\/li\u003e\n  \u003cli\u003eBlade length: 21\" (533 mm) — for 42\" decks\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 5‑point star — check your spindle before buying\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 6‑point star (942‑04308) center spindles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these blades improve cutting and bagging performance?\u003c\/h3\u003e\n\u003cp\u003eThe curved, toothed profile creates strong airflow under the deck, lifting clippings and feeding them into a mulching pattern or bag. The high‑lift geometry increases suction so bagging capacity can be noticeably higher compared with low‑lift blades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3‑in‑1 design: mulching, bagging, side discharge\u003c\/li\u003e\n  \u003cli\u003eHigh‑lift shape increases collection efficiency by about 50%\u003c\/li\u003e\n  \u003cli\u003eCurved teeth help shred tougher, overgrown grass more effectively\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protective features do the Hipa 134149 blades use?\u003c\/h3\u003e\n\u003cp\u003eThese blades are forged from a high‑carbon alloy steel that includes chromium and molybdenum elements for added strength and wear resistance. The cutting edges are painted to reduce corrosion during storage and handling; the coating will wear with normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy steel construction for durability and rust resistance\u003c\/li\u003e\n  \u003cli\u003ePainted edges to guard against surface corrosion and protect hands during installation\u003c\/li\u003e\n  \u003cli\u003eInspect for cracks or damage and wear gloves when changing blades\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain these replacement blades?\u003c\/h3\u003e\n\u003cp\u003eAlways disconnect spark plug and follow the mower manufacturer’s safety steps before replacing blades. Tighten mounting hardware to the tractor’s specified torque and recheck after a few minutes of use; regularly inspect blades for wear and balance to avoid vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall with mower off and keys removed; use heavy gloves\u003c\/li\u003e\n  \u003cli\u003eTorque bolts to mower manual specifications; recheck after initial run\u003c\/li\u003e\n  \u003cli\u003eSharpen or replace blades if bent, nicked, or imbalanced\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this blade set for: Owners of Craftsman LT1000 or LT2000 and compatible Husqvarna\/Poulan 42\" riding mowers with a 5‑point star spindle who want a durable, multipurpose blade that improves mulching and bagging performance. Choose these Hipa 134149 blades if you need OEM replacement dimensions (21\" x 2-1\/4\" x 9\/64\") and a 3‑in‑1 cutting profile, and always confirm your deck’s center hole pattern before purchasing to ensure correct fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are Hipa 134149 blades compatible with a 6‑point star spindle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These blades fit 5‑point star center spindles only and will not fit 6‑point star (942‑04308) spindles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the exact blade dimensions for the 134149 model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each blade is 21\" long, 2‑1\/4\" wide, 9\/64\" thick with a 1‑1\/16\" air lift, for 42\" decks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56833379303764,"sku":"B0DJSWVT82","price":64.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-134149-front-view.jpg?v=1787040813"},{"product_id":"hipa-mulching-mower-blades-2-pack-for-42-decks-6-point-star-center-942-0616a-high-lift-mulch-bag-side-discharge","title":"Hipa Mulching Mower Blades 2-Pack for 42\" Decks — 6-Point Star Center (942-0616A), High-Lift Mulch\/Bag\/Side Discharge","description":"\u003cp\u003e\u003cstrong\u003eHipa 2-pack 942-0616A mulching blades are replacement 6‑point star center blades designed to restore cutting performance on 42\" Cub Cadet, Troy‑Bilt, Bronco, Pony and MTD riding mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower is leaving uneven clippings, struggling to bag grass, or you want a blade engineered for mulching plus bagging and side discharge, these blades fit 42\" decks with a 6‑point (5\/8\") star center hole. Each blade measures 21-3\/16\" long, 2-11\/16\" wide and is 5\/32\" thick with a 1-1\/2\" air lift. The set replaces OEM part numbers including 942-0616A, 742-0616 and related variants, and comes as a two‑piece packaged pair so you can replace both spinning blades at once.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these blades change my mowing results?\u003c\/h3\u003e\n\u003cp\u003eThese blades are formed with a curved, toothed edge and higher lift profile to chop clippings finer for faster breakdown and more efficient bagging. The multi‑purpose design supports mulching, side discharge and improved bagging capacity without swapping blades.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurved toothed cutting edge for finer mulch and cleaner cuts\u003c\/li\u003e\n\u003cli\u003eHigh lift air flow increases bag fill by up to roughly 50%\u003c\/li\u003e\n\u003cli\u003eThree‑in‑one function eliminates the need to change blades for different tasks\u003c\/li\u003e\n\u003cli\u003eDurable stamped steel profile holds shape under normal use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these blades fit my mower deck and mounting bolt?\u003c\/h3\u003e\n\u003cp\u003eThey are made specifically for 42\" mower decks that use the 6‑point star center hole (5\/8\"). Confirm your current blade part number or measure the center hole and deck size to ensure compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlade length 21-3\/16\" (538 mm) matches 42\" decks\u003c\/li\u003e\n\u003cli\u003eCenter mounting: 6‑point star (5\/8\") hub pattern\u003c\/li\u003e\n\u003cli\u003eWorks with Cub Cadet, Troy‑Bilt Bronco\/Pony, MTD and many models using OEM numbers listed\u003c\/li\u003e\n\u003cli\u003eCheck blade thickness 5\/32\" (4 mm) and air lift 1-1\/2\" (38 mm) for fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe are the blades during installation?\u003c\/h3\u003e\n\u003cp\u003eThe cutting edges are painted to resist surface rust and to reduce the risk of sharp handling when you install them; the paint is a protective coating that will wear away with use. The blades are stamped from thicker steel to resist bending in typical mowing conditions, but routine inspection and sharpening will extend service life.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEdges coated to prevent corrosion and protect hands during fitting\u003c\/li\u003e\n\u003cli\u003e5\/32\" steel thickness for everyday durability\u003c\/li\u003e\n\u003cli\u003eInspect and balance blades after installation for smooth operation\u003c\/li\u003e\n\u003cli\u003eReplace if bent, cracked, or excessively worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and steps do I need to replace both blades?\u003c\/h3\u003e\n\u003cp\u003eChanging these blades requires basic hand tools and safety precautions. Disconnect the spark plug, secure the mower, remove the blade mounting bolts with the correct socket, swap in the new blades in the same orientation, torque bolts to manufacturer specs, and reattach the spark plug.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTools: socket set, torque wrench recommended, gloves, blade holder or wood block\u003c\/li\u003e\n\u003cli\u003eSafety: disconnect spark plug and secure mower deck before working\u003c\/li\u003e\n\u003cli\u003eRe-install blades with same lift orientation and torque to OEM spec\u003c\/li\u003e\n\u003cli\u003eBalance blades if vibration occurs after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hipa 942-0616A 2‑pack is for homeowners and landscapers who own 42\" deck riding mowers from Cub Cadet, Troy‑Bilt or MTD families and want a direct-fit replacement that improves mulching, bagging, and side discharge performance. Choose this set if you need OEM‑compatible dimensions, prefer a three‑in‑one blade to avoid swapping parts, and want blades packaged as a convenient two‑piece replacement pair.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these blades compatible with my Cub Cadet 42 inch deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your deck uses a 6-point star (5\/8\") center and matches 21-3\/16\" blade length; confirm OEM part numbers or measure before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the cutting edges come sharp and protected?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Edges arrive coated with paint for rust protection and safer handling; the coating will naturally wear off during mowing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56833379402068,"sku":"B0DJSSTFQL","price":70.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-packaging-942-0616a-blades.jpg?v=1787040814"},{"product_id":"hipa-carburetor-for-sthil-ms290-ms310-ms390-chainsaws-factory-tuned-anodized-aluminum-kit","title":"Hipa Carburetor for STHIL MS290 MS310 MS390 Chainsaws — Factory‑Tuned Anodized Aluminum Kit","description":"\u003cp\u003e\u003cstrong\u003eHipa MS 290 Carburetor is a ready-to-install replacement carburetor kit engineered to fit STHIL MS290, MS310 and MS390 chainsaws and restore reliable throttle and fuel delivery without aftermarket tuning.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your STHIL MS290-series saw is running rough, hard to start, or consuming fuel unevenly, a worn or damaged carburetor is often the cause. The Hipa MS 290 Carburetor kit includes the carburetor body plus essential installation supplies so you can swap parts quickly and get back to cutting. Built from anodized aluminum, brass fittings and rubber diaphragms, this assembly is designed for durability and arrives factory-tuned to minimize adjustment time after install.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my STHIL MS290, MS310 or MS390?\u003c\/h3\u003e\n\n\u003cp\u003eYes — this Hipa carburetor is manufactured to match the mounting pattern and bore sizes commonly used on MS290, MS310 and MS390 models produced in the specified production years. Measure or verify your model number against the saw serialplate when in doubt. The kit is listed as compatible with HD-18\/HD-19 style carburetors and the OEM number 1127 120 0650, which helps confirm fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMounting hole center-to-center: 31 mm\u003c\/li\u003e\n  \u003cli\u003eThrottle bore diameter: 20.6 mm\u003c\/li\u003e\n  \u003cli\u003eChoke bore diameter: 22.54 mm\u003c\/li\u003e\n  \u003cli\u003eVenturi diameter: 17 mm; fuel inlet: 4 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the Hipa MS 290 carburetor kit and why that matters?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes the carburetor plus several installation parts so you won’t need to source small components separately. These extras reduce downtime and the risk of misplacing essential pieces during repair. Everything ships together so you can complete the replacement in one service session.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 carburetor pre-tuned at the factory\u003c\/li\u003e\n  \u003cli\u003e1 cleaner tube and small feed\/vent tubing\u003c\/li\u003e\n  \u003cli\u003e1 fuel filter, 1 oil filter, 1 oil line\u003c\/li\u003e\n  \u003cli\u003e1 spark plug to replace worn ignition parts during servicing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is the Hipa replacement carburetor?\u003c\/h3\u003e\n\n\u003cp\u003eHipa specifies corrosion-resistant materials and a tested assembly process to improve endurance in outdoor, engine-heat environments. Brass components and an anodized aluminum body resist wear, while composite rubber diaphragms maintain fuel control under varying temperatures. Each unit undergoes a wet-flow test that mimics running conditions to verify consistent fuel delivery before shipping.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAnodized aluminum body for reduced corrosion\u003c\/li\u003e\n  \u003cli\u003eBrass fittings for wear resistance\u003c\/li\u003e\n  \u003cli\u003eRubber diaphragms engineered for flexibility and sealing\u003c\/li\u003e\n  \u003cli\u003eWet flow testing to simulate engine operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need to adjust the carburetor after installation?\u003c\/h3\u003e\n\n\u003cp\u003eThis carburetor arrives factory tuned and typically requires little to no initial adjustment for most saws. However, because local altitude, fuel blend and engine wear vary, a brief final idle and high-speed check is good practice. Always double-check your engine model number and test under safe, no-load conditions after fitting.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFactory-pre-tuned to reduce setup time\u003c\/li\u003e\n  \u003cli\u003eQuick idle and high-speed verification recommended\u003c\/li\u003e\n  \u003cli\u003eAdjustments only if performance differs due to altitude or fuel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hipa MS 290 Carburetor kit is meant for owners and technicians servicing STHIL MS290, MS310 and MS390 chainsaws who want a comprehensive, ready-to-install replacement. It suits landscapers, arborists, rural property owners and DIY mechanics who prefer to replace the carburetor and related consumables in one repair job rather than sourcing parts individually. If you maintain saws from the listed model years and want a pre-tested assembly to restore dependable fuel delivery, this kit is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor fit the MS290 produced in 2005?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits MS290 models from 2000–2012; verify your model number to ensure compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need to adjust the carburetor after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most units arrive pre-tuned and need little adjustment; check idle and high-speed performance after install.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56833501299028,"sku":"B01M3O9IPB","price":48.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-ms290-carburetor-front-view.jpg?v=1787041328"},{"product_id":"hipa-50-inch-high-lift-mower-blades-3-pack-for-cub-cadet-zt1-zt2-6-point-star-mount-alloy-steel-improved-bagging","title":"Hipa 50-inch High-Lift Mower Blades 3-Pack for Cub Cadet ZT1\/ZT2 6-Point Star Mount - Alloy Steel, Improved Bagging","description":"\u003cp\u003e\u003cstrong\u003eHipa 942-05052A is a three-pack of 6-point star high-lift replacement mower blades designed to fit 50-inch Cub Cadet ZT1 and ZT2 decks and deliver improved lift and collection for heavy or damp grass.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese blades are engineered to match the 6-star mounting pattern used on many Cub Cadet ZT1\/ZT2 Ultima and several XT\/GT\/LT series 50-inch decks. Constructed from alloy steel for added toughness and corrosion resistance, they offer high-lift geometry that creates a strong upward airflow to promote efficient bagging and mulching. Because mower mounting patterns can vary by model year, confirm the blade part number and star-shaped mounting hole before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWill these blades fit my Cub Cadet 50\" deck?\u003c\/h3\u003e\n\u003cp\u003eThey fit decks that use the 6-point star mounting configuration and list part numbers equivalent to 942-05052A or 742-05052A. Always verify the blade mounting hole shape on your mower spindle and compare the original blade part number.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: ZT1 and ZT2 Ultima 50\" decks (6-star mounting).\u003c\/li\u003e\n  \u003cli\u003eAlso fits select XT1\/XT2 and GT\/LT\/LX 50\" series variants with the same mount.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 3-bolt or non-star mounting systems.\u003c\/li\u003e\n  \u003cli\u003eCheck original blade MPN or measure mounting pattern before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these high-lift blades change mowing performance?\u003c\/h3\u003e\n\u003cp\u003eThe high-lift profile pulls grass upward into the cutting chamber to create stronger airflow for better collection in bags and cleaner discharge. That airflow also helps lift heavier or wetter clippings for more consistent cuts and improved mulching when conditions allow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigher suction for more efficient bagging of clippings.\u003c\/li\u003e\n  \u003cli\u003eCleaner edge-to-edge cut by lifting grass into the blades' path.\u003c\/li\u003e\n  \u003cli\u003eImproved handling of thicker, damp turf compared with low-lift blades.\u003c\/li\u003e\n  \u003cli\u003eMay slightly increase engine load on older or underpowered tractors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are these blades made of and how durable are they?\u003c\/h3\u003e\n\u003cp\u003eThe blades are stamped from alloy steel enriched with elements such as chromium and molybdenum for enhanced strength, wear resistance, and reduced rusting. Edges are protected with a painted coating for corrosion resistance and to reduce handling injury; this coating will wear during use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy steel construction for improved toughness and longevity.\u003c\/li\u003e\n  \u003cli\u003ePainted edge coating guards against surface rust and sharp handling.\u003c\/li\u003e\n  \u003cli\u003eInspect blades regularly for cracks, bends, or loosened fasteners.\u003c\/li\u003e\n  \u003cli\u003eWear thick gloves when installing or removing to avoid cuts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain these replacement blades?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires securing blades to the mower spindle using the correct hardware and torque specified by your mower manufacturer. Regular maintenance includes checking blade tightness after initial use, balancing if vibration occurs, and replacing blades if they show cracks, severe wear, or deformation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFollow mower manual for correct bolt torque and orientation.\u003c\/li\u003e\n  \u003cli\u003eRe-check blade tightness after the first few minutes of use.\u003c\/li\u003e\n  \u003cli\u003eSharpen blades as needed or replace if damaged.\u003c\/li\u003e\n  \u003cli\u003eStore spares in a dry place to prevent surface corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 3-pack of Hipa 942-05052A high-lift blades is aimed at owners of Cub Cadet ZT1\/ZT2 50-inch decks and compatible XT\/GT\/LT\/LX 50-inch models who need reliable replacement blades for improved bagging, edge-to-edge cutting, and better performance in heavier or damper turf. If your mower uses the 6-point star mounting pattern and you want durable alloy-steel blades that prioritize lift and collection efficiency, these blades are a practical upgrade or service replacement. If your machine uses a different mounting type, measure or check part numbers before ordering to ensure proper fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these blades the same as part 742-05052A?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Hipa 942-05052A replaces 742-05052A for 50\" decks that use the 6-star mounting pattern.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these blades for mulching and bagging?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the high-lift design improves suction for bagging and supports effective mulching in suitable conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56833642070356,"sku":"B0FYBL5CTT","price":70.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-view-50-inch-zt1-blade-pack.jpg?v=1787042461"},{"product_id":"hipa-46-inch-high-lift-mower-blades-for-405380-532405380-2-pack-alloy-steel-5-point-star-mount","title":"Hipa 46-Inch High-Lift Mower Blades for 405380\/532405380 2-Pack — Alloy Steel, 5-Point Star Mount","description":"\u003cp\u003e\u003cstrong\u003eHigh-lift, 5-point star replacement blades designed to fit 46-inch deck riding mowers (part numbers 405380 \/ 532405380) for stronger lift and improved grass collection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Hipa 46-inch mower blades are built to replace OEM part numbers used on many Husqvarna, Poulan and Craftsman 46\" deck tractors and zero-turn mowers. Manufactured from alloy steel with a protective coating, this two-blade pack uses a 5-point star mounting hole pattern and a notched air-lift profile to generate a powerful upward airflow that helps bagging, side discharge and mulching systems perform more efficiently. Before ordering, verify your mower's blade mounting pattern and part number to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these blades improve cutting and collection?\u003c\/h3\u003e\n\u003cp\u003eThe high-lift design creates a concentrated upward airflow that lifts grass clippings vertically into the mower’s chute or bagger. That stronger suction leads to cleaner cuts, fuller bags, and better handling of heavier or damp grass without clogging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-lift profile increases airflow for superior collection.\u003c\/li\u003e\n  \u003cli\u003e5-point star mount ensures secure fit with compatible decks.\u003c\/li\u003e\n  \u003cli\u003eNotched air-lift edge helps prevent clumping and improves discharge.\u003c\/li\u003e\n  \u003cli\u003ePair of blades balances deck for consistent cut quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich mower models and part numbers are compatible?\u003c\/h3\u003e\n\u003cp\u003eThese blades are designed to replace part numbers 405380 and 532405380 and match the 5-point star mounting hole configuration found on many 46\" Husqvarna, Poulan and Craftsman models. Compatibility can vary by model year, so check your mower’s existing blade marking or owner’s manual before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with YTH22V46, Z246, YTH21K46 and many 46\" ride mowers.\u003c\/li\u003e\n  \u003cli\u003eAlso fits models listed under 532403107, 594892801, 21546611 in some years.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for 46\" decks with different mounting patterns.\u003c\/li\u003e\n  \u003cli\u003eVerify blade MPN and mounting hole layout before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and safety features do these blades include?\u003c\/h3\u003e\n\u003cp\u003eConstructed from alloy steel (high-carbon mix with chromium and molybdenum additives), these blades prioritize strength, wear resistance and corrosion resistance. The trimmed edge is painted to delay rust formation and to reduce the risk of accidental cuts during installation; the paint will wear with use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy steel construction for improved durability and wear life.\u003c\/li\u003e\n  \u003cli\u003ePainted edges reduce rust and protect during handling.\u003c\/li\u003e\n  \u003cli\u003eInspect blades for cracks, nicks or looseness before each use.\u003c\/li\u003e\n  \u003cli\u003eAlways install\/remove blades using thick gloves and proper tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain these replacement blades?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires matching the 5-point star mounting hole and torquing blade bolts to your mower manufacturer’s specification. Routine maintenance—balancing, sharpening if needed, and checking tightness—keeps cut quality consistent and prolongs blade life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch mounting pattern, rotate blade so lift faces deck direction specified by mower.\u003c\/li\u003e\n  \u003cli\u003eTighten bolts to the torque listed in your mower manual; recheck after first hour of use.\u003c\/li\u003e\n  \u003cli\u003eKeep blades sharp; sharpen both blades equally to maintain deck balance.\u003c\/li\u003e\n  \u003cli\u003eReplace blades if bent, cracked or excessively worn.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These Hipa 46\" 5-point high-lift blades are made for homeowners and property managers who need a robust replacement for 46\" riding mower decks that use the 5-point star mount—especially those wanting improved bagging and cleaner discharge on thicker or slightly damp grass. They’re not universal replacements; confirm part number and mounting pattern before purchase to ensure proper fit and safe operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these blades fit my YTH22V46 mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your mower uses a 5-point star mounting pattern and 46\" blades with part numbers like 405380\/532405380. Verify the blade MPN and mounting hole before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many blades are included and what material are they made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This listing includes two 46\" high-lift blades made from alloy steel with corrosion-resistant paint on the edges.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56833642135892,"sku":"B0FYBS2GKR","price":70.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-packaging-46-inch-blades.jpg?v=1787042461"},{"product_id":"hipa-42-inch-6-point-star-mulching-mower-blades-2-pack-alloy-steel-fits-troy-bilt-mtd","title":"Hipa 42-Inch 6-Point Star Mulching Mower Blades — 2-Pack Alloy Steel, Fits Troy-Bilt\/MTD","description":"\u003cp\u003e\u003cstrong\u003eThese Hipa 942-0616 42-inch 6-point star mulching blades replace Troy-Bilt 942-0616\/742-0616 style blades and deliver durable mulching performance for compatible 42\" decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a direct-fit replacement for many Troy-Bilt and MTD 42-inch riding mower decks, the Hipa 942-0616 blade set is a two-pack of alloy-steel, 6-point star mulching blades. They are intended to restore cutting quality and enable mulching functionality on machines that use the 6-point star mounting pattern. Built from chromium- and molybdenum-enhanced high-carbon steel, these blades emphasize durability, wear resistance and corrosion protection during storage and installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models are these blades compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese blades are compatible with a broad range of 42\" Troy-Bilt and MTD models that use the 6-point star mounting hole. Always verify your mower’s blade mounting pattern and MPN before purchase since the same model name can use different blades in different years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: XT1 LT42, XT2 LX42, LT1042, LT1040, LT4200, ZT1-42, RZT42 and XT1\/XT2 42 models.\u003c\/li\u003e\n  \u003cli\u003eAlso fits some Troy-Bilt Bronco and Pony 42\" decks and select MTD 42\" tractors.\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers: 942-0616A, 742-0616A, 942-0616, 742-0616, 942-04126, 742-04126.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these mulching blades improve lawn care?\u003c\/h3\u003e\n\u003cp\u003eMulching blades are shaped to finely chop grass clippings and recirculate them back onto the lawn, which reduces visible clippings and returns nutrients to the turf. They help keep the deck cleaner and reduce bagging needs, though results vary with grass type, moisture and mowing height.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFine-chops clippings for even distribution across the lawn.\u003c\/li\u003e\n  \u003cli\u003eReduces need for a catcher and speeds cleanup after mowing.\u003c\/li\u003e\n  \u003cli\u003eSupports natural recycling of clippings as a light fertilizer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes do these blades use, and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThe Hipa blades are stamped from alloy steel that includes elements for increased strength and wear resistance. A protective paint coating is applied to edges to reduce rust during storage and to protect hands during installation; the coating will wear off with use, revealing the working edge.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy steel with chromium and molybdenum for improved hardness and longevity.\u003c\/li\u003e\n  \u003cli\u003ePainted edges for temporary corrosion resistance and safer handling.\u003c\/li\u003e\n  \u003cli\u003eRecommended pre-use inspection for cracks, looseness or damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain these blades safely?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires matching the blade’s 6-point star hole to your spindle and torquing the mounting hardware to the mower manufacturer’s spec. Routine maintenance—checking tightness, sharpening when needed, and replacing blades if bent or cracked—keeps cut quality consistent and prevents deck damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWear heavy gloves when handling blades to avoid cuts.\u003c\/li\u003e\n  \u003cli\u003eConfirm mounting hole type (6-point star) before fitting.\u003c\/li\u003e\n  \u003cli\u003eCheck blade tightness and condition before each season or after impacts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners and landscapers who own a 42\" Troy-Bilt or compatible MTD ride-on mower with a 6-point star blade mounting pattern and want a reliable, OEM-style mulching blade replacement. These two-pack blades suit users who prefer mulching over bagging to reduce yard waste and promote turf recycling, provided the blade part number and mounting pattern match their machine.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades fit my Troy-Bilt XT1 LT42?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit XT1 LT42 models that use the 6-point star mounting hole; confirm your deck’s blade MPN before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these blades sharpened and ready to use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Blades ship with factory edges and a protective paint coating; inspect and torque to spec before first use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56833642496340,"sku":"B0FYCDVQFZ","price":70.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-942-0616-front-packaging.jpg?v=1787042476"},{"product_id":"hipa-48-inch-high-lift-5-point-star-mower-blades-3-pack-alloy-steel-replacement-for-husqvarna-z248f-yth24v48","title":"Hipa 48-Inch High-Lift 5-Point Star Mower Blades — 3-Pack Alloy-Steel Replacement for Husqvarna Z248F YTH24V48","description":"\u003cp\u003e\u003cstrong\u003eThese three Hipa 532180054 48-inch high-lift mower blades are replacement 5-point-star blades engineered to fit Husqvarna Z248F, YTH24V48, YTH24K48 and many 48\" deck zero-turn and riding mower models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you need dependable deck performance and improved grass collection, the right blade matters. These Hipa blades use a high-lift profile and alloy-steel construction to sustain cutting power and produce strong upward airflow for bagging and side-discharge on heavy or damp turf. They match the 5-point star mounting pattern and come in a three-pack so you can service most 48\" decks in one go.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models and part numbers do these blades replace?\u003c\/h3\u003e\n\u003cp\u003eThese blades are sold under Hipa MPN 532180054 and correspond to common Husqvarna part numbers such as 180054 and 173920. They are intended for many 48\" deck zero-turn and lawn tractor applications where a 5-point star hole pattern is used.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Husqvarna Z248F, YTH24V48, YTH24K48 and similar 48\" deck models.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Z248, YTH2448, YTH2348, YTH2148 and a range of TS\/ RZ series models with 48\" decks.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers like 532 18 00‑54 (confirm your mower’s mounting hole pattern first).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these high-lift blades affect mowing and clippings?\u003c\/h3\u003e\n\u003cp\u003eThe high-lift profile creates a powerful upward airflow that lifts grass upright and moves clippings through the deck for cleaner bagging or effective side-discharge. That stronger suction helps collect heavier or wetter clippings better than low-lift designs, improving bag fill and cut quality in dense turf.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-lift shape for concentrated upward airflow and improved collection.\u003c\/li\u003e\n  \u003cli\u003eBetter performance on thick, wet, or taller grass compared with standard blades.\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain even cut and reduce standing grass before mulching or bagging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are these blades made of and how long do they last?\u003c\/h3\u003e\n\u003cp\u003eHipa blades are manufactured from alloy steel—high-carbon steel with elements like chromium and molybdenum added for strength and wear resistance. The edges are painted to resist surface rust and to protect hands during handling, though the coating will wear off with normal mowing use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy-steel construction resists wear and helps prevent corrosion.\u003c\/li\u003e\n  \u003cli\u003ePainted edges reduce initial rusting and protect during installation.\u003c\/li\u003e\n  \u003cli\u003eInspect regularly for cracks or looseness; replace if damaged to ensure safety.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I confirm fit and install these blades safely?\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, verify your mower uses a 5-point star mounting hole and a 48\" deck blade length—model years may change mounting configurations. Always disconnect spark plug, wear heavy gloves, and torque mounting fasteners to the manufacturer’s specification when installing blades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck your mower manual or remove an existing blade to confirm the 5-point star hole pattern.\u003c\/li\u003e\n  \u003cli\u003eDisconnect power, use gloves, and follow correct torque values for blade bolts.\u003c\/li\u003e\n  \u003cli\u003eReplace all three deck blades at once for best balance and blade life on 48\" decks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These Hipa 48\" high-lift blades are intended for homeowners, landscapers, and mower technicians who need an affordable OEM-fit replacement for Husqvarna-style 48\" decks that use a 5-point star mounting pattern. They suit operators who prioritize stronger grass collection and consistent deck performance across denser lawns, but anyone should confirm deck fitment and follow safe installation practices before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades fit my Husqvarna Z248F?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they match the 5-point star mounting and length for many Z248F 48\" deck models, but confirm your mower’s blade hole pattern first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these blades sold in sets or individually?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are sold as a three-pack, covering all blades on a typical 48\" deck so you can replace the set at once.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56833642627412,"sku":"B0FYC6NK17","price":71.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-532180054-front-packaging.jpg?v=1787042485"},{"product_id":"hipa-3-lb-twist-trimmer-line-105-2-7mm-red-heavy-duty-commercial-low-noise-cut","title":"Hipa 3 lb Twist Trimmer Line .105\" (2.7mm) Red – Heavy-Duty Commercial, Low-Noise Cut","description":"\u003cp\u003e\u003cstrong\u003eHipa 2.7 mm (.105\") twist trimmer line is a commercial-grade, 3-pound red spool designed for heavy-duty trimming of thick weeds, brush and overgrowth with reduced noise and improved cut quality.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you need a robust replacement line that fits many consumer and professional brushcutters, this Hipa spool delivers a balance of strength, durability and user-friendly performance. The twisted round profile lowers drag and sound, while a high-strength core resists breakage so you spend less time reloading and more time trimming. It’s sized to work with a wide range of brands and models and is intended for yards, rental fleets, landscapers and homeowners managing tough vegetation.\u003c\/p\u003e\n\n\u003ch3\u003eWill this trimmer line fit my trimmer or brushcutter?\u003c\/h3\u003e\n\n\u003cp\u003eHipa’s 2.7 mm (.105\") line is compatible with most consumer and many professional models that accept .105\" diameter line. Check your trimmer’s manual or spool specifications to confirm fit before use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorks with many Worx, Ryobi, Echo, Stihl, Black \u0026amp; Decker, Makita, Dewalt, Poulan and Craftsman models.\u003c\/li\u003e\n  \u003cli\u003eFits heads that accept .105\" or 2.7 mm diameter line.\u003c\/li\u003e\n  \u003cli\u003eDesigned for universal spools and aftermarket replacements—verify spool capacity and eyelet size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the twist profile affect cutting performance and noise?\u003c\/h3\u003e\n\n\u003cp\u003eThe twisted round shape reduces airflow drag and vibration compared with bulky polygonal or star-shaped lines, which leads to lower noise and smoother handling. It also delivers straighter cuts that leave an even finish along edges and beds.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFewer decibels and reduced drag for quieter operation.\u003c\/li\u003e\n  \u003cli\u003eSmoother cuts around landscaping features and flower beds.\u003c\/li\u003e\n  \u003cli\u003eLess line flutter and better balance at high RPMs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this line for heavy weeds and dense brush?\u003c\/h3\u003e\n\n\u003cp\u003eHipa’s line features a reinforced inner core and abrasion-resistant outer material that resists snapping and fraying when tackling thick weeds, berry vines and coarse vegetation. That means fewer reloads and longer continuous trimming sessions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-strength core minimizes breakage at the eyelet and spool.\u003c\/li\u003e\n  \u003cli\u003eExcellent abrasion resistance for rugged, long-wearing use.\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty formulation cuts through thicker plants with less frequent replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to load and use this trimmer line?\u003c\/h3\u003e\n\n\u003cp\u003eThe 3-pound spool contains continuous .105\" diameter line that’s simple to measure, cut and wind into most universal heads. The package includes a cutting tool to help size and prepare lengths quickly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e3 pounds of continuous line reduces trips to buy more often.\u003c\/li\u003e\n  \u003cli\u003eIncludes a cutting tool for fast, consistent lengths.\u003c\/li\u003e\n  \u003cli\u003eWorks well for hand-winding and pre-cut replacement into common spool designs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Landscapers, rental operators and homeowners who frequently trim medium-to-heavy vegetation will appreciate Hipa’s 2.7 mm twist line for its balance of strength, quieter operation and long life. If you need replacement line that fits a broad range of trimmer brands, cuts tougher material with fewer reloads and produces a tidy finish around beds and edging, this commercial-grade 3-pound spool is built for that workload.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this .105\" line compatible with Stihl and Echo trimmers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your Stihl or Echo model accepts .105\" (2.7 mm) line, this Hipa spool will fit. Check your trimmer’s manual to confirm diameter compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does the 3-pound spool last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Lifespan depends on use and vegetation; heavy commercial use consumes line faster, while occasional homeowner trimming will last many sessions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":56833745584468,"sku":"B0BJPHSLL7","price":64.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/hipa-front-label-spool.jpg?v=1787043267"}],"url":"https:\/\/gardenluxe.co.uk\/collections\/brand-hipa.oembed","provider":"Gardenluxe Uk","version":"1.0","type":"link"}