{"title":"ATRACYPART","description":"\u003cp\u003eBrowse our full ATRACYPART range. Every order ships free across the UK, with free 30-day returns as standard.\u003c\/p\u003e","products":[{"product_id":"atracypart-tecumseh-gas-fuel-tank-replacement-36863-fits-4-5-6-5-hp-ohh50-ohh60-engines-high-density-pe-with-screw-cap","title":"ATRACYPART Tecumseh Gas Fuel Tank Replacement 36863 — Fits 4.5–6.5 hp OHH50\/OHH60 Engines, High-Density PE with Screw Cap","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART 36863 is a direct-fit replacement gas tank with cap engineered to restore leaking or damaged tanks on Tecumseh 4.5–6.5 hp engines (fits OHH50, OHH60 and related models).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower, generator, or other small engine powered equipment is losing fuel or showing brittle, cracked plastic around the original tank, swapping in a robust aftermarket tank is a fast way to get back to work. This 36863 fuel tank from ATRACYPART is molded from high-density PE polymer, shaped to match Tecumseh mounting points, and supplied with a screw cap so you can install the part immediately. It replaces OE numbers 36863 and 36752 and lists compatibility with a broad set of Tecumseh models including OH195EA\/EP\/SA\/XA, OHH45\/50\/55\/60\/65, OHSK55 and others.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tank prevent leaks compared with older OEM tanks?\u003c\/h3\u003e\n\n\u003cp\u003eThe tank is manufactured from a reinforced polyethylene blend that resists fuel swelling and vibration fatigue better than many original units. Mold tolerances are optimized to align with factory mounting holes and seals, reducing stress points that cause cracks. You’ll notice fewer flex lines and a smoother surface where seals and screws meet.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-density PE polymer construction for chemical and vibration resistance\u003c\/li\u003e\n  \u003cli\u003eImproved molding around mounting points to lower stress fractures\u003c\/li\u003e\n  \u003cli\u003eIncludes screw-on cap for a secure seal out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my Tecumseh engine model?\u003c\/h3\u003e\n\n\u003cp\u003eThis fuel tank is designed to be a drop-in replacement for specific Tecumseh engines and matches the OE part numbers 36863 and 36752. It fits a wide range of overhead valve and horizontal shaft models commonly used on walk-behind mowers and small equipment. Double-check your engine model stamp or the original part number to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with OH195EA, OH195EP, OH195SA, OH195XA and similar OH195 variants\u003c\/li\u003e\n  \u003cli\u003eFits OHH45, OHH50, OHH55, OHH60, OHH65 and OHSK55 models\u003c\/li\u003e\n  \u003cli\u003eReplaces OE# 36863 and 36752 for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools will I need?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable with small-engine maintenance: remove the old tank, transfer the fuel lines and mounting hardware, and bolt the new tank in place. No specialized tools are required—basic wrenches and pliers are typically sufficient. If the cap or vent hose needs replacing, those items can usually be swapped in during the same service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple bolt-on replacement—matches factory mounting holes\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools (wrenches, screwdrivers, pliers) are all that’s needed\u003c\/li\u003e\n  \u003cli\u003eTransfer existing fuel lines and cap or use supplied cap if included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with the ATRACYPART tank?\u003c\/h3\u003e\n\n\u003cp\u003eATRACYPART backs this fuel tank with a 24-month warranty and stands behind product quality and fit. If the tank arrives damaged or develops an issue, customer service will assist with replacement or refund within the warranty period. Reach out to ATRACYPART support for guidance on returns, fitment questions, or installation tips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24-month warranty covering defects and fitment issues\u003c\/li\u003e\n  \u003cli\u003eHassle-free replacement or refund through ATRACYPART support\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for fitment and troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement fuel tank is aimed at homeowners, landscapers, and small equipment technicians who need a reliable tank that fits Tecumseh 4.5–6.5 hp engines. If you’re repairing a lawn mower, snow thrower, generator, or similar machine and your original tank shows cracks, leaks, or age-related deterioration, this part provides a cost-effective, direct-fit solution with a two-year warranty and improved material durability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tank include the fuel cap and vent?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The ATRACYPART tank comes with a screw-on cap; verify vent hose needs separately if your old hose is worn.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this tank on other engine brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s built to fit Tecumseh OE# 36863\/36752 models; cross-brand compatibility is not guaranteed without modification.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56799665160532,"sku":"B0DJNJYS1V","price":80.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-fuel-tank-front-view.jpg?v=1786736006"},{"product_id":"atracypart-54-mower-deck-spindle-3-pack-replacement-for-cub-cadet-craftsman-troy-bilt-precision-machined-steel","title":"ATRACYPART 54\" Mower Deck Spindle 3-Pack — Replacement for Cub Cadet, Craftsman \u0026 Troy-Bilt, Precision-Machined Steel","description":"\u003cp\u003e\u003cstrong\u003eThis 3-pack ATRACYPART replacement spindle fits 54\" mower decks for select Cub Cadet, Craftsman, Troy-Bilt and MTD models, restoring smooth blade rotation and deck performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a deck spindle wears out the mower becomes noisy, vibrates, and cuts unevenly. These ATRACYPART spindles are engineered as drop-in replacements for common OEM numbers 618P09236 and 618-09236, designed to match the geometry and durability needs of many 54-inch residential and small-commercial decks. Each kit includes three identical spindles so you can service an entire 54\" deck at once without hunting for individual parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models will these spindles work with?\u003c\/h3\u003e\n\u003cp\u003eThese spindles are machined to the specifications used by several popular brands that share 54\" deck designs. They are compatible with multiple Cub Cadet, Craftsman, Troy-Bilt and MTD lawn tractors and zero-turn models, covering a wide range of model years where the OEM part number matches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCub Cadet: XT1-GT54, XT1-ST54, ZT1-54, ZT2-54, ZTS2-54 and Columbia LT-36G.\u003c\/li\u003e\n  \u003cli\u003eCraftsman: T100, T85, Z5800, T3200.\u003c\/li\u003e\n  \u003cli\u003eTroy-Bilt: Mustang 54XP, Mustang Z54, Pony 36, Pony 36T.\u003c\/li\u003e\n  \u003cli\u003eMTD: ZT1-54 KH FAB (2022 version) and other models using part 618P09236 \/ 618-09236.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these spindles improve cutting performance?\u003c\/h3\u003e\n\u003cp\u003eWorn spindles cause blade wobble, inconsistent blade height, and rough finishes. Replacing them with precision-machined units restores stable blade rotation, which delivers a more even cut, reduces vibration transmitted to the deck, and helps preserve blade sharpness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision bearing seats ensure concentric blade rotation.\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel body resists deformation under load.\u003c\/li\u003e\n  \u003cli\u003eSmoother operation reduces mower vibration and deck wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these spindles easy to install for a non‑professional?\u003c\/h3\u003e\n\u003cp\u003eThe spindles are designed as direct-fit replacements so installation is straightforward for anyone with basic hand tools. Typical replacement requires removing the deck, unbolting the old spindle, transferring pulleys and blades if needed, and bolting the new unit in place.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop-in form factor matches OEM mounting bolt pattern.\u003c\/li\u003e\n  \u003cli\u003eNo specialty tools required—common wrenches and sockets suffice.\u003c\/li\u003e\n  \u003cli\u003eComes as a 3-pack so all deck spindles can be replaced at once.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and design features make these spindles durable?\u003c\/h3\u003e\n\u003cp\u003eATRACYPART builds these spindles from high-strength steel and finishes critical surfaces to resist wear and corrosion. The machined design centers bearings and seals for long service life under regular lawn-mowing loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength steel construction for impact and fatigue resistance.\u003c\/li\u003e\n  \u003cli\u003ePrecision machining for accurate bearing alignment.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finishes on exposed surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 3-pack is ideal for homeowners and small property managers who own a 54\" deck tractor or zero-turn from Cub Cadet, Craftsman, Troy-Bilt or compatible MTD models and need a reliable, cost-effective way to restore deck performance. If your mower shows vibration, uneven cutting, or noisy spindles and uses OEM part 618P09236 \/ 618-09236, this kit is a practical solution that allows you to replace all three deck spindles yourself and get back to mowing with cleaner, quieter results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spindles replace OEM 618P09236?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ATRACYPART 3-pack replaces OEM numbers 618P09236 and 618-09236 for compatible 54\" decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these spindles myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are direct-fit replacements; basic hand tools and standard mechanical skills are typically sufficient.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56801076183380,"sku":"B0DM238BCT","price":187.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-packaging-spindles.jpg?v=1786739085"},{"product_id":"atracypart-auxiliary-mill-oiler-kit-for-chainsaw-milling-1-5l-external-lubricator-with-metal-valve","title":"ATRACYPART Auxiliary Mill Oiler Kit for Chainsaw Milling — 1.5L External Lubricator with Metal Valve","description":"\u003cstrong\u003eATRACYPART Auxiliary Mill Oiler Kit is a 1.5L external lubrication system designed to feed bar oil to chainsaw milling attachments, reducing wear and keeping cuts cooler while you mill lumber.\u003c\/strong\u003e\n\n\u003cp\u003eIf you use a chainsaw with a milling attachment — Stihl, Husqvarna, Alaskan mill, slab cutting sawmills or similar lumber-milling rigs — this compact oiler kit adds continuous, adjustable lubrication to the bar and chain. Built from durable ABS plastic with a metal on\/off ball valve, the kit holds 1.5 liters of oil, mounts quickly to most mill rails, and helps preserve chain life and cutting performance during extended milling jobs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oiler kit fit my chainsaw mill?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intentional and simple: the tank and mounting base attach to the mill frame, the oil hose connects to your bar area, and one or two small holes may be required in the guide rod depending on your setup. The kit is compatible with single- and double-end rods larger than 36 inches and is designed to match common milling systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes tank, mounting base, oil hose, and clamps for secure attachment\u003c\/li\u003e\n  \u003cli\u003eRequires one drilled hole for double-end rod setups, two holes for a reversible single-end rod\u003c\/li\u003e\n  \u003cli\u003eWorks with popular mills: Stihl, Husqvarna, Alaskan, and most slab saw attachments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it actually reduce chain wear and overheating?\u003c\/h3\u003e\n\u003cp\u003eThe oiler supplies a steady flow of bar oil directly to the bar and chain, which lowers friction during cutting and slows abrasive wear. Proper lubrication also helps maintain lower cutting temperatures, improving the chain’s effective life and reducing the need for frequent sharpening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal ballcock valve provides adjustable flow control for different wood types\u003c\/li\u003e\n  \u003cli\u003e1.5L reservoir reduces refill frequency on long jobs\u003c\/li\u003e\n  \u003cli\u003eLubrication reduces heat buildup and abrasive contact along the bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and parts come with the kit, and how durable is it?\u003c\/h3\u003e\n\u003cp\u003eThe main tank is molded from impact-resistant ABS plastic to withstand outdoor use, while the metal valve offers reliable open\/close control. The package includes clamps, a bar oil injector, hose, a mounting base and a user manual so you can install and operate the system with standard tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.5L ABS oil tank with cap for easy filling and visibility\u003c\/li\u003e\n  \u003cli\u003eMetal on\/off ballcock valve for precise oil flow regulation\u003c\/li\u003e\n  \u003cli\u003eBar oil injector, oil hose, hose clamps and tank retention clamps included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this oiler change workflow on the mill?\u003c\/h3\u003e\n\u003cp\u003eWith continuous lubrication in place, you can mill longer runs without stopping to manually oil the chain or cool the bar. That saves time and reduces labor, making it easier to slice logs from end to end while keeping cutting quality consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLess frequent stops for manual oiling — more continuous milling time\u003c\/li\u003e\n  \u003cli\u003eSimplifies single-operator milling by automating oil delivery\u003c\/li\u003e\n  \u003cli\u003eHelps maintain cleaner cuts and more consistent feed rates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The ATRACYPART Auxiliary Mill Oiler Kit is aimed at anyone who mills timber with a chainsaw-mounted mill — hobbyist sawyers, weekend builders, on-site carpenters, and small sawmill operators who want to extend chain life, reduce downtime, and control lubrication without complex plumbing. It’s best for users whose mills are compatible with a 1.5L external tank and who can drill required mounting holes. ATRACYPART backs the product with a 24-month warranty and customer support to assist with fitment or installation questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this oiler kit compatible with Stihl and Husqvarna mills?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is designed to work with Stihl, Husqvarna, Alaskan and most common chainsaw milling attachments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much oil does the tank hold and can I control flow?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The reservoir holds 1.5 liters and includes a metal ballcock valve to regulate oil flow.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56805098258772,"sku":"B0CP3MTRZT","price":75.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-oilerkit-front-packaging.jpg?v=1786799375"},{"product_id":"atracypart-b2855-2hp-pool-pump-motor-56y-frame-115-230v-switchable-direct-replacement","title":"ATRACYPART B2855 2HP Pool Pump Motor — 56Y Frame, 115\/230V Switchable, Direct Replacement","description":"\u003cp\u003e\u003cstrong\u003eThe ATRACYPART B2855 2HP pool pump motor is a high-performance direct replacement motor built to match Century\/A.O. Smith B855 specifications and restore reliable pool circulation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty 2-horsepower motor offers a straightforward swap-in for many common pool pump housings, giving residential and light-commercial pools a dependable, energy-conscious option without buying a complete pump. It comes factory-sized with a 56Y frame and square flange mounting, a switchable 115\/230V connection, and rated performance designed to mirror OE outputs so you can return your filtration and circulation system to normal quickly.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this motor fit my current pump?\u003c\/h3\u003e\n\u003cp\u003eThe ATRACYPART B2855 uses the standard 56Y frame and square flange footprint found on Century B2855\/A.O. Smith B855 motors and compatible pump families. If your pump lists any of the compatible series, this motor is engineered to bolt in without modifying the housing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting: 56Y frame with square flange matching OE dimensions.\u003c\/li\u003e\n  \u003cli\u003eCompatible pumps: Sta-Rite, Hayward, Pentair, Anthony series and more.\u003c\/li\u003e\n  \u003cli\u003eReplacement OE part numbers: B2855 and 2855 for straightforward identification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key electrical and performance specifications?\u003c\/h3\u003e\n\u003cp\u003eThis unit delivers 2 HP power at up to 3450 RPM and supports both 115V and 230V through internal wire reconnection, making it adaptable to common pool electrical setups. Amperage and service ratings align with heavy-duty, continuous-use pool applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePower: 2 HP, top speed 3450 RPM.\u003c\/li\u003e\n  \u003cli\u003eVoltage: 115\/230V switchable at the terminal box.\u003c\/li\u003e\n  \u003cli\u003eCurrent: Max 6.5A at 115V \/ 10.0A at 230V; Service Factor 1.1.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what safety steps should I take?\u003c\/h3\u003e\n\u003cp\u003eThe motor is intended for both DIY and professional installation and is designed to fit existing pump mounts so complex modifications are typically unnecessary. Always isolate electrical supply, confirm compatibility, and follow wiring instructions, especially when changing voltage connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off and disconnect power before starting any work.\u003c\/li\u003e\n  \u003cli\u003eFollow the manual for correct wire reconnection to change voltage.\u003c\/li\u003e\n  \u003cli\u003eInspect motor and gaskets, tighten bolts evenly to prevent leaks and vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits does this replacement motor provide?\u003c\/h3\u003e\n\u003cp\u003eThe ATRACYPART B2855 balances durability with energy efficiency to help maintain clear water while lowering operating cost compared with replacing an entire pump. Built from corrosion-resistant materials, it’s intended for continuous pool service with quieter operation than many older motors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCost savings by replacing only the motor instead of the full pump assembly.\u003c\/li\u003e\n  \u003cli\u003eDurable construction suited for outdoor pool environments.\u003c\/li\u003e\n  \u003cli\u003eQuiet single-speed operation compatible with common centrifugal pumps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Pool owners, maintenance technicians, and service shops needing an OE-spec 2HP replacement motor for Century\/A.O. Smith B855 family pumps or any compatible Sta-Rite, Hayward, Pentair, or Anthony pump models. Choose this motor if you want a robust, energy-conscious swap-in that restores circulation performance without custom mounting work; confirm model compatibility and follow safe electrical practices before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the ATRACYPART B2855 compatible with Pentair WhisperFlo?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits many Pentair WhisperFlo and other listed models when your pump uses a 56Y frame and square flange.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I switch voltage between 115V and 230V myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the motor supports 115\/230V switching via terminal rewire; always disconnect power and follow the wiring guide.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56805448286548,"sku":"B0GFC9CYFT","price":370.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-b2855-front-view.jpg?v=1786803314"},{"product_id":"atracypart-deck-spindle-assembly-3-pack-for-bad-boy-czt-zt-elite-direct-fit-oe-replacement-7-5-8-height","title":"ATRACYPART Deck Spindle Assembly 3-Pack for Bad Boy CZT ZT Elite — Direct-Fit OE Replacement, 7-5\/8\" Height","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART 037-6015-50 is a direct-fit replacement deck spindle assembly sold as a 3-pack, compatible with many Bad Boy mower models to restore reliable blade rotation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePerformance and durability matter when a mower's cutting deck starts showing vibration, grinding noises, or uneven blade spin. This three-piece spindle kit is engineered to match OE specifications (replaces 037-6015-00 and 037-6015-50) and fits a wide range of Bad Boy machines — from CZT and ZT series to Pup Lightning, Outlaw, Maverick, Walk Behind and Revolt models across model years listed below. With a 7 5\/8\" height and 4 1\/2\" mounting hole center distance, these assemblies aim to bring back smooth pulley operation and even blade speed.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models and decks will this spindle assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThis spindle assembly was manufactured to align with factory measurements and mounts, making it compatible with many Bad Boy decks and models across several years. Always cross-check the listed fit guide with your machine's year and deck width before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible series: CZT, ZT, ZT Elite, Pup\/Pup Lightning, Outlaw XP, Compact Outlaw, Maverick, Walk Behind, Revolt.\u003c\/li\u003e\n  \u003cli\u003eDeck widths covered: 36\" to 72\" depending on model — see the detailed fit list in the product details.\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers: 037-6015-00 and 037-6015-50 for straightforward direct-fit swaps.\u003c\/li\u003e\n  \u003cli\u003eCommon fit years: ranges from 2007 to 2020 across various submodels; confirm year-specific compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does replacing the spindle assembly affect blade performance?\u003c\/h3\u003e\n\u003cp\u003eA worn spindle can cause blade wobble, uneven cuts, pulley slippage, and unusual grinding sounds. Installing a new assembly restores concentric rotation and reduces load on the pulley and belt, helping blades run true and cut more evenly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores smooth rotation and reduces vibration for a cleaner cut.\u003c\/li\u003e\n  \u003cli\u003eLowers stress on belts and pulleys, extending their service life.\u003c\/li\u003e\n  \u003cli\u003eHelps eliminate grinding noises linked to worn spindle bearings or housings.\u003c\/li\u003e\n  \u003cli\u003eEach spindle in the pack lets you service multiple decks or keep spares on hand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and build details?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is constructed from durable metal alloy designed for longevity under typical mower loads. Key dimensions are provided so you can confirm fitment with your deck mounting points prior to installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall height: 7 5\/8\" — aligns with many Bad Boy deck mounting profiles.\u003c\/li\u003e\n  \u003cli\u003eMounting hole center distance: 4 1\/2\" for accurate bolt alignment.\u003c\/li\u003e\n  \u003cli\u003eMaterial: high-strength metal aluminum alloy for wear resistance and durability.\u003c\/li\u003e\n  \u003cli\u003eSold as a 3-pack to service multiple spindles or keep replacements available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support are included with an ATRACYPART spindle?\u003c\/h3\u003e\n\u003cp\u003eATRACYPART backs this spindle assembly with a long-term warranty and customer support to help if fitment or quality questions arise. The warranty covers defects in material or workmanship under normal usage, and ATRACYPART encourages direct contact for any concerns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e60-month warranty for replacement or refund in qualifying cases.\u003c\/li\u003e\n  \u003cli\u003eCustomer assistance available through ATRACYPART channels for fitment or installation guidance.\u003c\/li\u003e\n  \u003cli\u003ePackaged as new, inspected components intended for direct-fit installation.\u003c\/li\u003e\n  \u003cli\u003eReplaces factory OE parts 037-6015-00 and 037-6015-50 for easier parts matching.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This three-pack of ATRACYPART deck spindle assemblies is aimed at homeowners, landscapers, and service shops who maintain Bad Boy mowers and need reliable, OE-spec replacement spindles. It's particularly useful if you’re experiencing blade wobble, noise, or pulley issues and want a durable, direct-fit solution with a long warranty and the convenience of multiple spindles in one purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spindle replace OE 037-6015-00?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ATRACYPART assembly replaces OE numbers 037-6015-00 and 037-6015-50 for direct-fit replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the key dimensions to confirm fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Height is 7 5\/8\" and mounting hole distance is 4 1\/2\"; verify these against your deck mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56805504581972,"sku":"B0C7BG7K94","price":212.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-spindle-front-view.jpg?v=1786805160"},{"product_id":"atracypart-b2853-1-hp-pool-pump-motor-56y-frame-115-230v-single-speed-stainless-shaft-easy-install","title":"ATRACYPART B2853 1 HP Pool Pump Motor 56Y Frame 115\/230V Single-Speed — Stainless Shaft, Easy Install","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART B2853 is a 1.0 HP single-speed pool pump motor (115\/230V, 56Y frame, 3450 RPM) engineered as a direct OEM-style replacement to restore flow and reliability to compatible pool pumps.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a tired or noisy pump motor disrupts your pool maintenance, swapping in a reliable replacement keeps water circulating efficiently. The ATRACYPART B2853 is built to align with common original equipment bolt patterns and electrical ratings so you can refit many Sta‑Rite, Pentair and similar pumps quickly. With a stainless steel shaft, improved cooling, and an angled terminal for easier wiring, this motor targets durability and straightforward installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich pumps and part numbers does this motor replace?\u003c\/h3\u003e\n\u003cp\u003eThe B2853 is designed to be compatible with a wide range of popular pump models and legacy part numbers. It fits many Sta‑Rite Max‑E‑Glas, Max‑E‑Glas II, Dura‑Glas, Dyna‑Glas families and Pentair SuperFlo variants when your pump uses a 56Y frame motor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon replaced part numbers include 193985, 177215, 196238, 355020S and equivalents.\u003c\/li\u003e\n  \u003cli\u003eWorks with OEM families listed in user manuals for Sta‑Rite and Pentair pumps.\u003c\/li\u003e\n  \u003cli\u003eAlways cross‑check your pump’s motor label and shaft\/bolt pattern before purchasing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this motor make installation easier?\u003c\/h3\u003e\n\u003cp\u003eInstallation focuses on a direct-fit design and accessible electrical connections. The motor features four threaded bolt holes matching OE spacing and an angled terminal to reduce awkward wiring bends.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour threaded bolt holes align to original pump mounts for stable attachment.\u003c\/li\u003e\n  \u003cli\u003eAngled terminal simplifies wire access in cramped pump baskets.\u003c\/li\u003e\n  \u003cli\u003eRated for 115\/208–230V (+\/−10%) to match common residential supply voltages.\u003c\/li\u003e\n  \u003cli\u003eClear manufacturer reference B2853 to help identify a correct replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and performance features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe motor is constructed for steady, long‑term operation under typical pool conditions. It uses corrosion-resistant materials and an improved cooling design to reduce thermal stress and extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy‑duty 303 stainless steel shaft for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eNo‑adjust start switch for reliable single‑speed startup behavior.\u003c\/li\u003e\n  \u003cli\u003eOptimized cooling channels to maintain run temperature and efficiency.\u003c\/li\u003e\n  \u003cli\u003eBuilt to meet or exceed original equipment (OE) specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there restrictions or warranty details I should know?\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, verify local regulations and installation rules — some jurisdictions restrict specific motor sales or installations. ATRACYPART supports the product with customer service and a limited warranty to address early issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNot permitted for sale or installation in California — verify local compliance.\u003c\/li\u003e\n  \u003cli\u003e6‑month warranty and customer support available for troubleshooting.\u003c\/li\u003e\n  \u003cli\u003eProfessional install recommended if you’re unfamiliar with motor wiring and pump alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this motor is for: Pool owners, service technicians, and maintenance professionals who need a dependable, OEM‑style replacement motor for mid‑size residential pumps. If your pump’s motor plate shows a 56Y frame, 1.0 HP rating and 3450 RPM speed and you want a corrosion‑resistant shaft, simplified wiring, and broad parts compatibility, the ATRACYPART B2853 is sized and specified to restore pump performance with minimal fuss.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this motor fit my Pentair SuperFlo pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your pump uses a 56Y frame and the motor specs match 1.0 HP, 3450 RPM, and 115\/230V, the B2853 is likely compatible. Always compare the motor label and bolt pattern first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the motor myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic mechanically straightforward, but because wiring and shaft alignment matter, hire a qualified technician if you're not experienced with pump motors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56805541282132,"sku":"B0CXJBCQFX","price":292.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-b2853-front-view.jpg?v=1786806180"},{"product_id":"atracypart-1-5-hp-pool-pump-motor-56y-frame-115-230v-3450-rpm-dual-voltage-psc-odp-replacement","title":"ATRACYPART 1.5 HP Pool Pump Motor 56Y Frame 115\/230V 3450 RPM, Dual-Voltage PSC ODP Replacement","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART B2854 is a 1.5 HP, 56Y-frame pool pump motor designed as a direct, energy-efficient replacement for many residential and commercial single-speed pool and spa pumps.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis motor is built to restore strong water circulation and reliable performance to above-ground and in-ground pools, hot tubs, and water features. With a dual-voltage design (115\/230V), a compact 56Y frame for common flange mounts, and a 3450 RPM top speed, the B2854 suits homeowners, pool technicians, and property managers who need a straightforward swap-in replacement that balances power and efficiency. Its PSC (permanent split capacitor) design and 1.1 service factor help it handle routine operation and brief overloads without excessive energy draw.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this motor fit my existing pump?\u003c\/h3\u003e\n\u003cp\u003eThe B2854 uses a 56Y square flange configuration and a standard threaded shaft, which matches many popular pump models. Confirm frame size, shaft diameter, and voltage before ordering to ensure a simple replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e56Y square flange for common flange mounts (Hayward, Pentair, etc.).\u003c\/li\u003e\n  \u003cli\u003eStandard threaded shaft fits most impellers—measure before purchase.\u003c\/li\u003e\n  \u003cli\u003eDual-voltage (115\/230V) wiring options for flexible installations.\u003c\/li\u003e\n  \u003cli\u003eCompatible with many single-speed pumps when specs align.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect from a 1.5 HP, 3450 RPM motor?\u003c\/h3\u003e\n\u003cp\u003eThe B2854 provides steady flow and head pressure appropriate for medium to large residential pools and many commercial circulation systems. Its PSC design is reliable for continuous-duty applications where single-speed operation is acceptable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.5 HP output for strong water movement and effective filtration.\u003c\/li\u003e\n  \u003cli\u003e3450 RPM top speed to maintain adequate flow rates for filtration and heating.\u003c\/li\u003e\n  \u003cli\u003e1.1 service factor to tolerate temporary overloads during startup or heavy use.\u003c\/li\u003e\n  \u003cli\u003eAmperage ratings of 8.0\/16.0 help estimate power draw on 230V and 115V systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this motor built to survive poolside conditions?\u003c\/h3\u003e\n\u003cp\u003eYes — the B2854 is engineered with materials and enclosure choices that stand up to humid, chlorinated environments commonly found near pools and spas. Proper mounting and grounding remain important for long service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOpen Drip Proof (ODP) enclosure designed for outdoor pump areas.\u003c\/li\u003e\n  \u003cli\u003eCold-rolled steel housing and corrosion-resistant finishes for durability.\u003c\/li\u003e\n  \u003cli\u003e100% copper windings for quieter, efficient operation.\u003c\/li\u003e\n  \u003cli\u003eThreaded shaft and sealed components to resist water exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe motor is intended as an easy retrofit for technicians and competent DIYers. Basic hand tools and standard electrical wiring knowledge are typically sufficient—always follow local electrical codes and shut power at the source before work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSquare flange (C-face) mounting for straightforward bolt-on replacement.\u003c\/li\u003e\n  \u003cli\u003eDual-voltage terminals labeled for simple 115\/230V hookup.\u003c\/li\u003e\n  \u003cli\u003eStandard shaft and dimensions minimize need for pump modifications.\u003c\/li\u003e\n  \u003cli\u003eRoutine lubrication and inspection recommended to maximize lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ATRACYPART B2854 targets homeowners replacing worn or noisy single-speed motors, pool technicians servicing residential and small commercial systems, and facility managers seeking a dependable, widely compatible replacement motor. Choose this model if you need a robust 1.5 HP motor with a 56Y flange, dual-voltage flexibility, and construction suited to poolside environments. If you run variable-speed systems or need multistage energy savings, consult a pool professional to determine if a single-speed PSC motor meets your efficiency goals.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this motor work with my Hayward Super Pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely yes if your Super Pump uses a 56Y flange and matches the B2854 voltage and shaft size. Verify frame, shaft diameter, and voltage before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I wire this for 115V and 230V?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the B2854 supports dual-voltage wiring. Follow the wiring diagram on the terminal box and local electrical codes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56805619663188,"sku":"B0DYJ9F72R","price":345.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-b2854-front-profile.jpg?v=1786807980"},{"product_id":"atracypart-t-15-salt-cell-replacement-for-hayward-turbo-tcell940-13-5-ft-cable-corrosion-resistant-for-pools-to-40-000-gal","title":"ATRACYPART T-15 Salt Cell Replacement for Hayward Turbo TCELL940 — 13.5 ft Cable, Corrosion-Resistant, for Pools to 40,000 gal","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART T-15 Salt Cell is a direct replacement for Hayward Turbo TCELL940 and compatible systems, delivering automatic salt chlorination for in-ground pools up to 40,000 gallons.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want to stop adding chlorine by hand and restore steady sanitation, this replacement cell reproduces the original T-15 performance with a corrosion-resistant construction and a long 13.5 ft cable for flexible installation. It is engineered to match the electrical and plumbing connections used by Hayward AquaRite, TurboCell, SwimPure Plus and associated control systems, so you can swap the old cell without rewiring or major changes to your pool equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this T-15 replacement affect my pool’s chlorine levels?\u003c\/h3\u003e\n\u003cp\u003eThe cell generates chlorine through electrolysis of salt in the pool water, producing consistent sanitizer output around the original T-15 specification. When installed correctly and with recommended salt levels, it keeps free chlorine steady, reducing the need for manual dosing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for pools up to 40,000 gallons\u003c\/li\u003e\n  \u003cli\u003eOptimal salt range: 2700–3400 ppm for reliable output\u003c\/li\u003e\n  \u003cli\u003eAdvanced plate materials reduce corrosion for sustained chlorine production\u003c\/li\u003e\n  \u003cli\u003eIncludes cleaning tool to remove scale and debris for peak performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Hayward or AquaRite system without modifications?\u003c\/h3\u003e\n\u003cp\u003eYes — the ATRACYPART T-15 uses the same 10-pin connector and 2-inch union sizing as the OEM T-15 models, allowing plug-and-play replacement in most Hayward TurboCell, AquaRite and SwimPure Plus installations. The extended cable also lets you position the cell comfortably relative to the control unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10-pin connector for direct controller plug-in\u003c\/li\u003e\n  \u003cli\u003e2-inch universal unions for vertical or horizontal plumbing\u003c\/li\u003e\n  \u003cli\u003e13.5 ft cable reduces need to relocate controller\u003c\/li\u003e\n  \u003cli\u003eCompatible models include W3T-CELL-15, TCELL940, T-CELL-15, and equivalents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and lifetime can I expect from this replacement cell?\u003c\/h3\u003e\n\u003cp\u003eThe cell is built from corrosion-resistant materials and includes a cleaning tool and two sealing gaskets to simplify routine upkeep. With proper salt levels and occasional cleaning of mineral buildup, the unit is designed for steady service; ATRACYPART also backs it with a 12-month warranty and lifetime technical support.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 2 sealing gaskets and a cleaning tool\u003c\/li\u003e\n  \u003cli\u003eRoutine cleaning preserves plate efficiency and lifespan\u003c\/li\u003e\n  \u003cli\u003e12-month warranty with free replacement for manufacturing issues\u003c\/li\u003e\n  \u003cli\u003eLifetime support via email, phone, and online chat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one T-15 salt cell, two sealing gaskets, and a cell cleaning tool. Before purchasing, verify your system’s part number and controller compatibility to make sure the 10-pin connector and union sizes match your equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 × T-15 salt cell, 2 × sealing gaskets, 1 × cleaning tool\u003c\/li\u003e\n  \u003cli\u003eConfirm part numbers: W3T-CELL-15, TCELL940, T-CELL-15, etc.\u003c\/li\u003e\n  \u003cli\u003eCheck salt level and controller model for plug compatibility\u003c\/li\u003e\n  \u003cli\u003eInstallation guide and optional video available for DIY setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own an in-ground swimming pool using Hayward TurboCell, AquaRite, SwimPure Plus, OmniLogic, ProLogic or similar salt systems and need a reliable, drop-in replacement for a worn or failed T-15 cell, this ATRACYPART unit is made for you. It suits pool owners who prefer lower-maintenance automatic chlorination for large pools (up to 40,000 gallons), want straightforward plug-and-play installation without rewiring, and value corrosion-resistant construction plus vendor support. For best results, confirm your existing cell’s part number and keep salt levels within the recommended range to maintain consistent chlorine generation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this T-15 cell compatible with AquaRite and OmniLogic controllers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It uses the standard 10-pin connector and fits AquaRite, OmniLogic, ProLogic and similar Hayward-compatible systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What salt level is required for proper operation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Maintain pool salt between 2700–3400 ppm for stable chlorine production and optimal cell life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56805634113876,"sku":"B0F48KVQPG","price":476.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-t15-front-view.jpg?v=1786808210"},{"product_id":"atracypart-46-mower-deck-spindle-rebuild-kit-for-husqvarna-rz4621-rz4623-z246-2-spindles-blades-belt","title":"ATRACYPART 46\" Mower Deck Spindle Rebuild Kit for Husqvarna RZ4621 RZ4623 Z246 — 2 Spindles, Blades \u0026 Belt","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART's complete 46\" deck spindle rebuild kit restores smooth, quiet blade rotation and reliable belt drive for compatible Husqvarna zero-turn mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your 46-inch Husqvarna deck has started producing uneven cuts, grinding noises, or slipping belts, this all-in-one rebuild kit gives you the replacement spindles, blades, belt, idler pulleys, and deck wheels needed to bring the deck back to factory-like performance. Every component is selected to match common OEM part numbers so installation is straightforward and the parts work together to reduce vibration and extend service life.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models and OEM numbers does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed for 46-inch decks used on the Husqvarna RZ4621, RZ4623, RZ46i, Z246, and Z246i models. The included spindles, blades, belt, idlers and deck wheels map to multiple OEM references to simplify cross-referencing and ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpindles replace OEM 174356, 174358, 532174356, 532174358 and related numbers.\u003c\/li\u003e\n  \u003cli\u003eBlades match common OEM codes such as 403107, 405380 and other listed part numbers.\u003c\/li\u003e\n  \u003cli\u003eBelt and idler pulleys correspond to OEM references like 539117245 and 539132728.\u003c\/li\u003e\n  \u003cli\u003eDeck wheels replace OEM 174873 and equivalents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the parts improve cutting quality and reduce vibration?\u003c\/h3\u003e\n\u003cp\u003eFresh spindles with pre-greased bearings reduce friction and eliminate worn-bearing wobble that causes uneven cuts. Balanced replacement blades and a new belt maintain consistent blade speed, while idlers and deck wheels keep the belt tracking squarely and the deck level.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-greased bearings reduce start-up friction and grinding noise.\u003c\/li\u003e\n  \u003cli\u003ePrecision-balanced blades minimize vibration and promote even clipping.\u003c\/li\u003e\n  \u003cli\u003eDurable belt prevents slippage and maintains blade RPM under load.\u003c\/li\u003e\n  \u003cli\u003eNew idler pulleys and deck wheels stabilize belt alignment and deck travel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and what should I expect during installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles the common wear parts for a 46\" deck: two spindles assemblies, replacement mower blades, a deck belt, idler pulleys, and deck wheels. Installation typically requires basic mechanic tools and moderate mechanical experience; follow torque specs and safety steps when removing the deck and handling blades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete spindle assemblies with bearings ready to install.\u003c\/li\u003e\n  \u003cli\u003eTwo or three mower blades (depending on deck configuration) matched to OEM lengths.\u003c\/li\u003e\n  \u003cli\u003eDeck belt sized to OEM 539117245 and a set of idler pulleys for correct routing.\u003c\/li\u003e\n  \u003cli\u003eReplacement deck wheels for smooth deck movement and height stability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with this rebuild kit?\u003c\/h3\u003e\n\u003cp\u003eATRACYPART backs the kit with a two-year warranty and customer support for part fitment or replacements. If any component fails or doesn't fit your deck, contact the seller for troubleshooting, exchange, or warranty service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-year warranty covering manufacturing defects and premature failures.\u003c\/li\u003e\n  \u003cli\u003eCustomer support for fitment questions and replacement parts.\u003c\/li\u003e\n  \u003cli\u003eParts chosen to match common OEM numbers to reduce return issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This rebuild kit is intended for owners and technicians of Husqvarna 46-inch zero-turn mowers who want a cost-effective way to restore cutting performance without sourcing individual parts. It’s a practical choice for DIY mechanics, small landscaping businesses, and maintenance teams seeking matched components that reduce vibration, improve cut quality, and extend deck life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my Husqvarna RZ4623 deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This kit is made for 46\" decks including the Husqvarna RZ4623 and cross-references common OEM numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is the warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: ATRACYPART provides a two-year warranty with support for replacements or fitment issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56805678547284,"sku":"B0FN38RQDX","price":214.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-packaging-46inch-deck-kit.jpg?v=1786809080"},{"product_id":"atracypart-54-mower-deck-spindle-rebuild-kit-for-cub-cadet-zt1-54-zt2-54-3-spindles-blades-belt","title":"ATRACYPART 54\" Mower Deck Spindle Rebuild Kit for Cub Cadet ZT1-54 ZT2-54 — 3 Spindles, Blades \u0026 Belt","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART's 54\" mower deck spindle rebuild kit is a complete replacement package that restores cutting performance for compatible Cub Cadet, Troy-Bilt, and Craftsman 54-inch decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one rebuild kit was engineered to eliminate uneven cuts, reduce vibration, and replace worn components that cause poor deck performance. Instead of sourcing individual parts, this kit supplies three heavy-duty spindles, matching blades, idler pulleys, deck wheels, and a premium belt to get your 54\" deck back to factory-like operation. Every component is chosen to meet the fitment and durability needs of ZT1-54, ZT2-54, Mustang Z54, and Z560 decks.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly comes in this 54\" deck rebuild kit and why does each part matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes spindles, blades, idler pulleys, deck wheels, and a belt — each item addresses a particular failure point on worn decks. Replacing these together prevents repeated visits to the parts store and ensures components wear evenly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3 high-strength spindles to restore smooth blade rotation and reduce vibration.\u003c\/li\u003e\n  \u003cli\u003e3 balanced blades for even, clean cutting and reduced scalping.\u003c\/li\u003e\n  \u003cli\u003e3 idler pulleys to maintain correct belt tension and prevent slippage.\u003c\/li\u003e\n  \u003cli\u003e4 deck anti-scalp wheels to keep the deck level and protect turf.\u003c\/li\u003e\n  \u003cli\u003e1 premium deck belt to ensure reliable power transfer to the blades.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing the spindles improve mower performance?\u003c\/h3\u003e\n\u003cp\u003eWorn spindles produce wobble, noise, and inconsistent blade speed, which show as uneven cuts and excessive vibration. Fresh spindles restore a stable blade mount and consistent rotation, improving cut quality and reducing strain on the deck and engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces blade runout and vibration for smoother operation.\u003c\/li\u003e\n  \u003cli\u003eRestores proper blade alignment to prevent striping and scalping.\u003c\/li\u003e\n  \u003cli\u003eImproves safety by securing blades with new mounting hardware and bearings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my Cub Cadet, Troy-Bilt, or Craftsman 54\" mower deck?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed for 54\" decks on specific models: Cub Cadet ZT1-54 and ZT2-54 series, Troy-Bilt Mustang Z54, and Craftsman\/MTD Z560. It replaces common OEM spindle, blade, pulley, wheel, and belt numbers used across those machines to simplify compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpindles compatible with OEM references 618-06978 and 918-06978.\u003c\/li\u003e\n  \u003cli\u003eBlades and belt sized to match factory 54\" deck specifications.\u003c\/li\u003e\n  \u003cli\u003eIncludes replacement idlers and deck wheels matching common OEM part numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and ongoing maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically involves removing the deck, replacing the spindle housings and blades, swapping idlers and wheels, and routing the new belt. Routine checks after a few hours of use will ensure bolts remain tight and the belt tracks correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic mechanic tools required; spindle bearings come preassembled for faster swap-out.\u003c\/li\u003e\n  \u003cli\u003eTorque spindle mounting hardware to manufacturer specs; recheck after first mowing.\u003c\/li\u003e\n  \u003cli\u003eInspect belt tension and pulley alignment periodically for longest life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This ATRACYPART 54\" deck rebuild kit is ideal for landscapers, property owners, and do-it-yourself mechanics who want a single purchase that replaces all common wear items on a 54-inch mower deck. If you own a compatible Cub Cadet, Troy-Bilt, or Craftsman mower and want to stop chasing individual parts, this kit offers a reliable, warranty-backed route to smoother, more consistent mowing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e[2-Year Warranty \u0026amp; Support] Backed by a 2-year warranty. If any part fails or doesn’t fit your mower deck, contact us anytime for replacement or assistance.\u003c\/li\u003e\n  \u003cli\u003e3 Spindles Replaces OEM Part Numbers: Troy Bilt, Cub Cadet, MTD: 618-06978, 918-06978\u003c\/li\u003e\n  \u003cli\u003e3 Blades Replaces OEM Part Numbers: MTD, Cub Cadet, Troy Bilt: 742-05056A, 942-05056A, 942-05056\u003c\/li\u003e\n  \u003cli\u003e1 Belt Replaces OEM Part Numbers: Cub Cadet MTD Troy Bilt 954-04329, 954-04329A 754-04329\u003c\/li\u003e\n  \u003cli\u003e4 Deck Wheels Replaces OEM Part Numbers: Cub Cadet MTD Troy Bilt 734-04155, 734-04039A, 734-3058, 734-3058B, 753-04856, 753-04856A\u003c\/li\u003e\n  \u003cli\u003e3 Idler Pulleys Replaces OEM Part Numbers:(2) 756-05034, 756-05034A, 956-05034, 280-242, 280-119, 78-133, 34-109, GY20110, GY20629, GY20639, GY22082 (1) Cub Cadet 756-04511B, MTD 756-04511B, Troy-Bilt 756-04511B\u003c\/li\u003e\n  \u003cli\u003eCompatible with: 54\" mower deck rebuild kits for Cub Cadet ZT1-54 , ZT2-54, Craftsman Z560, and Troy-Bilt Mustang Z54\u003c\/li\u003e\n  \u003cli\u003eComplete 54\" Deck Rebuild Kit: This 54 inch deck rebuild kit restores smooth, consistent cutting performance. Includes spindles, blades, idler pulleys, deck wheels, and belt—everything needed for a full 54\" mower deck rebuild.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit a Cub Cadet ZT2-54?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is compatible with Cub Cadet ZT1-54 and ZT2-54 decks and replaces the common OEM spindle, blade, pulley, wheel, and belt numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is hardware included for spindle installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Spindles come preassembled with bearings; standard mounting hardware for typical 54\" decks is included, but verify your model's fastener requirements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56805678678356,"sku":"B0FN3L8CGF","price":326.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-of-kit.jpg?v=1786809082"},{"product_id":"atracypart-deck-spindle-assembly-for-bad-boy-mowers-037-6015-50-direct-fit-7-5-8-height-4-1-2-mount-spacing","title":"ATRACYPART deck spindle assembly for Bad Boy mowers — 037-6015-50 direct-fit, 7 5\/8\" height \u0026 4 1\/2\" mount spacing","description":"\u003cb\u003eATRACYPART 037-6015-50 is a direct-fit deck spindle assembly designed to restore smooth blade rotation and reliable performance on compatible Bad Boy mowers.\u003c\/b\u003e\n\n\u003cp\u003eThis heavy-duty spindle assembly is engineered to match OE specifications for a wide range of Bad Boy models, including CZT, ZT, ZT Elite, Pup Lightning, and select Outlaw, Maverick and Revolt machines. Built from durable metal alloy, it replaces worn or noisy spindles so your mower’s pulleys and blades run true again. The part measures 7 5\/8\" tall with a 4 1\/2\" mounting hole distance and replaces OE numbers 037-6015-00 and 037-6015-50.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mowers will this spindle assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThe ATRACYPART spindle is manufactured to fit many Bad Boy models across several model years. Always verify deck size and year against the compatibility list before ordering to ensure a correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits CZT models with 42\", 50\" and 60\" decks (2010–2012).\u003c\/li\u003e\n  \u003cli\u003eCompatible with ZT and ZT Elite decks (50\", 60\", 48\", 54\", 60\" ranges; various years 2007–2020).\u003c\/li\u003e\n  \u003cli\u003ePup and Pup Lightning decks (48\", 52\", 60\", and larger AOS\/Diesel 60\"–72\" ranges).\u003c\/li\u003e\n  \u003cli\u003eAlso fits Outlaw XP (2015–2016), Maverick, Compact Outlaw, Walk Behind and Revolt models listed in product details.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does replacing the spindle help mower performance?\u003c\/h3\u003e\n\u003cp\u003eA failing spindle produces grinding noises, wobbling blades, and poor cut quality. Swapping in a new assembly restores correct blade alignment, improves pulley engagement, and reduces bearing strain so blades spin smoothly and evenly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates vibration and uneven cutting caused by worn spindle bearings.\u003c\/li\u003e\n  \u003cli\u003eReduces load on belts and pulleys for longer component life.\u003c\/li\u003e\n  \u003cli\u003eRestores factory blade RPM and even blade contact with turf.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and durability features?\u003c\/h3\u003e\n\u003cp\u003eThis spindle assembly is built from high-strength metal alloy and produced to OE dimensions for direct replacement. Its specified height and mounting hole spacing ensure secure installation and correct deck geometry after replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall height: 7 5\/8\" for proper blade clearance and belt alignment.\u003c\/li\u003e\n  \u003cli\u003eMounting hole distance: 4 1\/2\" to match factory mounts.\u003c\/li\u003e\n  \u003cli\u003eConstructed from durable metal for wear resistance and long service life.\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers 037-6015-00 and 037-6015-50 for direct-fit swapping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with the part?\u003c\/h3\u003e\n\u003cp\u003eATRACYPART backs this spindle assembly with a 24-month warranty to cover manufacturing defects and fitment issues. If you encounter problems, customer support is available to help with replacement or refund options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24-month warranty for peace of mind and reliable coverage.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit manufacturing reduces installation surprises and adjustment needs.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available through ATRACYPART for questions or warranty claims.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This spindle assembly is ideal for lawn care professionals, property managers, and homeowners who operate Bad Boy riding mowers and need a cost-effective, direct-fit replacement for noisy or failing deck spindles. Choose this part if you want OE-compatible dimensions, a durable metal construction, and a 24-month warranty to restore smooth blade performance and extend the life of your cutting deck.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spindle replace OE 037-6015-00?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. ATRACYPART 037-6015-50 replaces OE 037-6015-00 and 037-6015-50 for direct-fit replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the spindle dimensions I should check?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check overall height 7 5\/8\" and mounting hole distance 4 1\/2\" to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56819344310612,"sku":"B0C7BHC9DJ","price":98.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-deck-spindle-front-view.jpg?v=1786962531"},{"product_id":"atracypart-spindle-assembly-for-john-deere-x300-x350-series-direct-fit-heavy-duty-replacement","title":"ATRACYPART Spindle Assembly for John Deere X300\/X350 Series — Direct-Fit Heavy-Duty Replacement","description":"\u003cstrong\u003eHigh-strength ATRACYPART spindle assembly restores cutting performance on compatible John Deere X300\/X350 and Ztrak mowers without extra machining.\u003c\/strong\u003e\n\n\u003cp\u003eWhen a worn or noisy spindle begins to affect cut quality, this ATRACYPART replacement spindle assembly offers a direct-fit option engineered to match the original John Deere geometry and mounting points. Built from robust materials and supplied with a 12-month warranty, the assembly aims to deliver consistent rotation and longer service life so you can get back to mowing quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWill this spindle assembly fit my John Deere X300 or X350 series mower?\u003c\/h3\u003e\n\u003cp\u003eYes — the assembly is designed to fit a broad set of John Deere Select Series and Ztrak models where the listed OEM numbers apply. It follows the same bolt pattern and shaft dimensions as the original parts, so it installs in place of the factory spindle on compatible decks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits X300, X300R, X304, X305R, X310, X324, X350, X350R, X354, X370 Select Series.\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with Z225 (S\/N After 080001-), Z235, Z245, Z255, Z355E Ztrak models.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM AM137483, M159146, M157769, M157736 for a straightforward swap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this replacement spindle and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eThe ATRACYPART spindle assembly is manufactured from high-strength metals and heat-treated components to resist wear under normal mowing conditions. Bearings and seals are selected to limit premature failure and keep the spindle running smoothly for many hours of use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty hub and shaft construction for torsional strength and stability.\u003c\/li\u003e\n  \u003cli\u003ePrecision bearings and seals to reduce play and shed debris.\u003c\/li\u003e\n  \u003cli\u003eSurface treatments that resist corrosion and extend service intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation complicated and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward for anyone comfortable with basic mower maintenance. The spindle drops into the existing deck location and secures with the original hardware; typical installations require wrenches, a torque wrench, and basic hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-on replacement — no welding or re-machining required.\u003c\/li\u003e\n  \u003cli\u003eRemove blade and belt, unbolt old spindle, position new spindle, torque fasteners to spec.\u003c\/li\u003e\n  \u003cli\u003eEstimated time: 30–90 minutes depending on access and experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and after-sale support does ATRACYPART provide?\u003c\/h3\u003e\n\u003cp\u003eATRACYPART backs this spindle assembly with a 12-month warranty against manufacturing defects and offers customer support for fitment or installation questions. If any component arrives damaged or fails under normal use within the warranty period, contact the seller for troubleshooting or replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty covering material and workmanship defects.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment guidance and troubleshooting.\u003c\/li\u003e\n  \u003cli\u003eReplacement compatible with OEM part numbers to simplify ordering the correct item.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This spindle assembly is aimed at homeowners, landscapers, and repair shops maintaining John Deere X300\/X350 Select Series or Ztrak mowers that need a reliable, direct-fit replacement. If you want to restore cut quality, eliminate spindle-related vibration, or perform preventive maintenance using a part that matches OEM specifications, this ATRACYPART unit is designed to meet those needs while keeping downtime to a minimum.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spindle replace OEM AM137483?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ATRACYPART assembly is a direct replacement for AM137483 and compatible OEM numbers listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is the warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The product includes a 12-month limited warranty against manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56821165588820,"sku":"B0DLN5MS2S","price":85.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-spindle-front-view_6d638c95-79d6-4ec2-80ef-d2dd44db8e33.jpg?v=1786970043"},{"product_id":"atracypart-mower-deck-spindle-assembly-for-ferris-snapper-simplicity-direct-fit-replacement-heavy-duty-bearings-5061095","title":"ATRACYPART Mower Deck Spindle Assembly for Ferris\/Snapper\/Simplicity — Direct-Fit Replacement, Heavy-Duty Bearings (5061095)","description":"\u003cstrong\u003eATRACYPART mower deck spindle assembly is a direct-fit replacement that restores smooth blade rotation and eliminates grinding noises on compatible Ferris, Snapper, and Simplicity zero-turn and walk-behind mowers.\u003c\/strong\u003e\n\n\u003cp\u003eIf your mower is making unusual grinding sounds, producing uneven cuts, or the blades wobble during operation, a worn or bent spindle is often the root cause. This ATRACYPART spindle assembly replaces OEM numbers like 5061095, 5061095SM, and 5046363X1 and is built from heavy-duty materials to withstand normal wear and demanding lawnwork. It ships as a complete unit designed for straightforward installation so you can return to mowing quickly with reliable performance and a 12-month warranty backing the purchase.\u003c\/p\u003e\n\n\u003ch3\u003eHow will replacing the spindle affect mower noise and vibration?\u003c\/h3\u003e\n\u003cp\u003eWorn bearings or bent spindle shafts make grinding, rumbling, and vibration more noticeable. Swapping the old spindle for a new assembly reduces metal-on-metal contact and stabilizes the blade hub, cutting noise and vibration significantly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces damaged bearings that create grinding sounds\u003c\/li\u003e\n  \u003cli\u003eStraightens blade rotation to remove wobble\u003c\/li\u003e\n  \u003cli\u003eReduces vibrations that stress deck components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich mower models and OEM numbers does this assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThis spindle is engineered to fit many Ferris, Snapper, and Simplicity decks, including multiple IS, F, FW, and ZTR series models. It matches common OEM part numbers so it can serve as a direct replacement for several factory spindles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Ferris: IS500Z, IS700Z, IS1000Z, IS2000Z, IS3000Z and more\u003c\/li\u003e\n  \u003cli\u003eCompatible Snapper: 400Z, 500Z, 550Z series and select walk-behind models\u003c\/li\u003e\n  \u003cli\u003eCompatible Simplicity: Colt ZT2148, ZT2352 and Citation\/Champion series\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM: 5061095, 5061095SM, 5046363X1\/X3\/X5\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components and features are included with the spindle assembly?\u003c\/h3\u003e\n\u003cp\u003eThe assembly arrives as a complete deck spindle unit built for heavy-duty use, including properly seated bearings and a machined spindle shaft. It’s intended to simplify repairs by reducing the need to buy multiple separate parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled spindle shaft and housing for easier swap-out\u003c\/li\u003e\n  \u003cli\u003eDurable construction to resist bending and premature wear\u003c\/li\u003e\n  \u003cli\u003eIncludes seals and fitted bearings to restore blade stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be user-friendly for owners comfortable with basic mower maintenance. Typical steps include removing the mower deck, unbolting the old spindle, and bolting the new assembly in place—torqued to manufacturer specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires basic hand tools and proper torque wrench\u003c\/li\u003e\n  \u003cli\u003eDeck removal recommended for clear access to spindles\u003c\/li\u003e\n  \u003cli\u003eRefer to mower manual for torque and belt routing guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ATRACYPART spindle assembly is for homeowners, landscapers, and service technicians who need a rugged, direct-fit replacement for worn or damaged deck spindles on Ferris, Snapper, and Simplicity mowers. If you want to stop blade wobble, eliminate grinding noises, and restore a consistent, cleaner cut without sourcing multiple parts, this pre-assembled spindle is made for fast repair and dependable results. Backed by a 12-month warranty, it’s a practical choice for anyone maintaining zero-turn or walk-behind decks that list the compatible model or OEM reference.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spindle replace OEM part 5061095?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it directly replaces 5061095 and related numbers like 5061095SM and 5046363X1 for many compatible models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation DIY-friendly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if you can remove the deck and use basic hand tools. Follow torque specs in your mower manual for best results.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56821166506324,"sku":"B0DLNT5BT8","price":99.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-spindle-front-view_a476d55d-8ee6-454f-b2f4-bbc653d5eaf3.jpg?v=1786970063"},{"product_id":"atracypart-lawn-mower-deck-spindle-assembly-for-ariens-gravely-52-deck-direct-fit-high-strength-bearings","title":"ATRACYPART Lawn Mower Deck Spindle Assembly for Ariens \u0026 Gravely 52\" Deck — Direct-Fit, High-Strength Bearings","description":"\u003cp\u003e\u003cstrong\u003eHigh-strength ATRACYPART replacement spindle assembly restores smooth, quiet blade rotation on 52\" Ariens and Gravely mower decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your zero-turn or garden tractor is showing grinding noises, vibration, or uneven cuts, a worn spindle assembly is often the root cause. This ATRACYPART spindle assembly is engineered to replace OEM 51528000 and 51537200 and fits a range of Ariens Ikon and Gravely ZT 52-inch decks. Built from durable metal and quality bearings, it’s designed to bring back balance, reduce noise, and extend the life of your mower deck with a direct-fit replacement.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this spindle assembly improve mowing performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a damaged or worn spindle re-centers the blade and restores even rotation, which reduces scalping and leaves a cleaner striping pattern. The improved bearing support lowers friction so blades spin more freely and with less noise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRe-establishes proper blade alignment for even cutting\u003c\/li\u003e\n  \u003cli\u003eReduces vibration and grinding sounds\u003c\/li\u003e\n  \u003cli\u003eImproves blade spin efficiency for tidier grass discharge\u003c\/li\u003e\n  \u003cli\u003eHelps avoid premature wear on other deck components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich mower models and OEM parts does this fit?\u003c\/h3\u003e\n\u003cp\u003eThis spindle assembly is made to match the form and function of the original units used on many 52\" decks. It’s compatible with multiple Ariens Ikon series and Gravely ZT models, making it a straightforward swap for routine repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Ariens: Ikon-X 52, Edge 52, Ikon-XD 52, Ikon-XL 52\u003c\/li\u003e\n  \u003cli\u003eFits Gravely: ZT XL 52, ZTX 52, ZTX Stealth 52\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part numbers 51528000 and 51537200\u003c\/li\u003e\n  \u003cli\u003eDesigned as a direct-fit, bolt-on replacement for the listed decks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction and materials are used for longevity?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is manufactured from high-strength metal and fitted with premium bearings to withstand heavy use across seasons. Those components reduce the chance of bent spindles and bearing failure that commonly cause deck downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength metal spindle housing for impact resistance\u003c\/li\u003e\n  \u003cli\u003eQuality sealed bearings to block debris and retain lubrication\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined mounting surfaces for accurate blade tracking\u003c\/li\u003e\n  \u003cli\u003eDurable finish to resist corrosion from wet grass and chemicals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what support is available?\u003c\/h3\u003e\n\u003cp\u003eInstallation involves removing the old spindle and bolting the new assembly into the deck—no welding or custom mods required for compatible decks. ATRACYPART backs the product with a 12-month warranty and customer support to help with fit questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt-on replacement—no special tools beyond standard mechanic set\u003c\/li\u003e\n  \u003cli\u003eComes ready to install with pre-assembled bearings and housing\u003c\/li\u003e\n  \u003cli\u003e12-month warranty for parts defects or premature failures\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment and installation guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Landscapers, property owners, and maintenance technicians who operate Ariens Ikon-series or Gravely ZT 52\" decks and want a durable, OEM-replacement spindle to stop grinding noises, eliminate uneven blade rotation, and restore deck reliability. If you need a direct-fit, heavy-duty spindle assembly that replaces OEM 51528000\/51537200 and reduces mower downtime, this ATRACYPART unit is built to meet those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spindle fit Ariens Ikon-X 52-inch decks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ATRACYPART spindle is compatible with Ariens Ikon-X 52-inch decks and replaces OEM 51528000\/51537200.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers the spindle assembly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The product includes a 12-month warranty covering manufacturing defects and premature failure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56821166670164,"sku":"B0DLNLSCV9","price":85.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-view-spindle-assembly.jpg?v=1786970063"},{"product_id":"atracypart-54-mower-deck-spindle-for-cub-cadet-craftsman-troy-bilt-high-strength-steel-precision-machined","title":"ATRACYPART 54\" Mower Deck Spindle for Cub Cadet, Craftsman \u0026 Troy-Bilt – High-Strength Steel, Precision-Machined","description":"\u003cp\u003e\u003cstrong\u003eHeavy-duty replacement spindle engineered to restore smooth blade rotation on 54-inch Cub Cadet, Craftsman, Troy-Bilt and compatible mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis ATRACYPART spindle replaces OEM part 618P09236 \/ 618-09236 and is manufactured from high-strength steel to withstand frequent use and outdoor conditions. It’s precision-machined to reduce vibration, promote even cutting, and make installation straightforward for DIYers and professional technicians alike. If your mower deck is wobbling, producing uneven cuts, or making unusual noises, a worn spindle is a common cause — swapping in a quality replacement can return the deck to reliable operation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this spindle improve lawn-cutting performance?\u003c\/h3\u003e\n\u003cp\u003eThe spindle stabilizes blade rotation so each pass delivers a cleaner, more consistent cut. Better stability reduces vibration, which protects the blade, deck, and bearings over time and helps maintain the mower’s alignment and cut height consistency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-machined shaft for steady blade tracking\u003c\/li\u003e\n  \u003cli\u003eDurable bearings reduce wobble and noise\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish for longer life in wet conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich mower models will this part fit?\u003c\/h3\u003e\n\u003cp\u003eThis spindle is built to match form and function for a range of 54-inch deck tractors and zero-turn machines. Confirm fit by comparing part numbers or deck specifications, but it’s commonly used with many Cub Cadet, Craftsman, Troy-Bilt, and compatible MTD\/Columbia models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCub Cadet: XT1-GT54, XT1-ST54, ZT1-54, ZT2-54, ZTS2-54\u003c\/li\u003e\n  \u003cli\u003eCraftsman: T100, T85, Z5800, T3200\u003c\/li\u003e\n  \u003cli\u003eTroy-Bilt \u0026amp; others: Mustang 54XP, Mustang Z54, Pony 36\/36T, Columbia LT-36G\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for someone with basic mechanical skills. The spindle is designed to match OEM mounting points so you typically remove the mower deck, unbolt the old spindle, transfer the blade and pulley, and secure the new spindle using standard hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: ratchet set, torque wrench, pliers, flathead and socket set\u003c\/li\u003e\n  \u003cli\u003eNo specialized machining required; follow torque specs from your mower manual\u003c\/li\u003e\n  \u003cli\u003eSwap bearings or seals if they show wear during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality should I expect?\u003c\/h3\u003e\n\u003cp\u003eATRACYPART spindles are made from high-strength alloy steel and finished for corrosion resistance. The construction focuses on longevity under load and accurate tolerances to maintain bearing seating and pulley alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength steel body resists bending and wear\u003c\/li\u003e\n  \u003cli\u003ePrecision bore and shaft reduce vibration and promote bearing life\u003c\/li\u003e\n  \u003cli\u003eProtective coating slows rust on exposed surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This replacement spindle suits homeowners and small-acreage property managers who service their own equipment, lawn care professionals maintaining fleets of 54-inch decks, and repair shops needing a durable, direct-fit spindle that matches OEM specifications. If you want to restore even cutting, eliminate deck vibration, and avoid frequent service calls, this robust ATRACYPART spindle is a practical upgrade or direct replacement for worn 54\" deck spindle assemblies.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spindle replace OEM 618-09236?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this ATRACYPART spindle is a direct replacement for OEM 618P09236 \/ 618-09236.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the spindle myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — installation is typically doable with common hand tools and basic mechanical skills.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56822221308244,"sku":"B0DM22ZQQ2","price":84.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-spindle-front-view_17c19444-7a51-4648-84dd-2185eab45cee.jpg?v=1786972158"},{"product_id":"atracypart-50-inch-deck-spindle-assembly-for-cub-cadet-craftsman-troy-bilt-fits-zt1-50-zt2-50-z5600-z5650-includes-bolts","title":"ATRACYPART 50-Inch Deck Spindle Assembly for Cub Cadet Craftsman Troy-Bilt - Fits ZT1-50 ZT2-50 Z5600 Z5650, Includes Bolts","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART 50-inch deck spindle assembly is a full replacement spindle kit engineered to restore smooth blade rotation and reliable performance on compatible Cub Cadet, Craftsman and Troy Bilt zero-turn mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower has been making grinding noises, cutting unevenly, or showing play in the blade hubs, a worn or bent spindle is often the culprit. This ATRACYPART spindle assembly is built for 50-inch decks and includes mounting bolts and threaded components so you can swap the damaged unit with minimal downtime. It replaces OEM numbers 618-09256 and 618P09256 and fits a range of popular models, delivering a heavy-duty, cost-effective repair option for homeowners and landscapers alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this spindle assembly improve my mower’s cutting performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn spindle eliminates blade wobble and restores consistent RPM transfer from the deck, which produces cleaner, more uniform cuts. Improved bearing condition reduces vibration and noise, protecting blades and deck components from accelerated wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores even blade rotation to reduce striping and missed spots\u003c\/li\u003e\n  \u003cli\u003eReduces vibration for a quieter, smoother operation\u003c\/li\u003e\n  \u003cli\u003eProtects adjacent parts by stopping uneven load transfer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich mower models and OEM parts is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis spindle assembly was designed to match the fit and function of several 50-inch decks. It directly replaces the listed OEM part numbers and fits specific Cub Cadet, Craftsman and Troy Bilt models without modification when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Cub Cadet ZT1-50 and ZT2-50 models\u003c\/li\u003e\n  \u003cli\u003eCompatible with Craftsman Z5600 (17ARFACQ093) and Z5650 (17ARFACQ091)\u003c\/li\u003e\n  \u003cli\u003eWorks with Troy Bilt Mustang Z50 (17ARFACQA66)\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM 618-09256 and 618P09256\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes with the spindle kit and how difficult is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with the spindle housing and the necessary mounting bolts and threaded hardware so you won’t need to source additional fasteners. Basic mechanical skill and common tools are all that’s required; many users complete the swap in a single afternoon following safety procedures and torque specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes spindle assembly plus mounting bolts and threads\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on installation—no specialized tools required\u003c\/li\u003e\n  \u003cli\u003eFollow mower-specific service manual for torque and safety steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this spindle for heavy or commercial use?\u003c\/h3\u003e\n\u003cp\u003eManufactured from high-strength materials and designed for heavier loads, this spindle is intended for frequent mowing and high-traffic conditions. ATRACYPART backs the assembly with a 12-month warranty to support long-term ownership.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty construction resists bending and premature wear\u003c\/li\u003e\n  \u003cli\u003eBuilt to perform under repeated, intensive mowing cycles\u003c\/li\u003e\n  \u003cli\u003e12-month warranty for parts coverage and buyer confidence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ATRACYPART 50-inch deck spindle assembly is aimed at homeowners, groundskeepers and small landscaping businesses who need a dependable, affordable replacement to revive 50-inch zero-turn mowers. If your mower is on the compatible fit list and you’re experiencing noise, vibration, or uneven cutting, this kit provides a direct-fit repair that reduces downtime and avoids costly deck or transmission damage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spindle fit my Craftsman Z5600 mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s compatible with Craftsman Z5600 (17ARFACQ093) and Z5650 (17ARFACQ091) 50-inch decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are mounting bolts included with the spindle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit includes all necessary mounting bolts and threaded hardware for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56824760533332,"sku":"B0DLNTWZ93","price":77.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-assembly.jpg?v=1786986896"},{"product_id":"atracypart-hot-tub-filter-standpipe-caps-6-piece-set-3-5-1-grey-5-white-screw-on-debris-seal-for-hot-spring-spas","title":"ATRACYPART Hot Tub Filter Standpipe Caps 6-Piece Set, 3.5\" (1 Grey + 5 White) — Screw-On Debris Seal for Hot Spring Spas","description":"\u003cp\u003e\u003cstrong\u003eReplacement standpipe caps for Hot Spring spas that secure filters, prevent debris entry, and fit the Freshwater AG+ 71325 system.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your Hot Spring or compatible spa running smoothly with this 6-piece cap set from ATRACYPART. The kit includes one grey cap tailored for the grey standpipe that houses the Freshwater AG+ Continuous Silver Ion 71325 system and five white caps for the remaining standpipes. These caps screw onto the top of the filter standpipes to hold filters vertically and block dirt, small objects, and buildup from entering the plumbing and pump area.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these caps protect my spa pump and plumbing?\u003c\/h3\u003e\n\u003cp\u003eStandpipe caps form a tight barrier at the top of the filter standpipe, stopping larger debris and foreign objects from falling into the suction pathway. That reduces the risk of clogs, impeller damage, and pressure-related wear on the pump.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eScrew-on design creates a reliable seal to keep out hair, leaves, and loose particles.\u003c\/li\u003e\n  \u003cli\u003eMaintains filter vertical position to ensure correct flow and filtration efficiency.\u003c\/li\u003e\n  \u003cli\u003ePrevents foreign objects from entering the pump housing and plumbing lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these caps fit my Hot Spring spa model?\u003c\/h3\u003e\n\u003cp\u003eYes — the set is made to match the common 3-1\/2 inch standpipe caps used across Hot Spring hot tub lines and compatible models. The grey cap specifically fits the grey standpipe used with the Freshwater AG+ 71325 system, while the white caps fit the remaining white standpipes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Hot Spring families such as Highlife, Hot Spot, Limelight, Tiger River, and Caldera.\u003c\/li\u003e\n  \u003cli\u003eDesigned for the standard 3-1\/2\" standpipe diameter used in these systems.\u003c\/li\u003e\n  \u003cli\u003eWorks with existing Hot Spring spa filtration housings and replacement filters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: line up the cap threads and screw onto the standpipe by hand until snug. Periodic inspection and simple removal for cleaning are all that’s required to keep the caps performing well.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo tools are required for most installs — hand-tighten until secure.\u003c\/li\u003e\n  \u003cli\u003eRemove, rinse, and inspect caps when servicing filters for simple upkeep.\u003c\/li\u003e\n  \u003cli\u003eReplacement is fast: swap a worn cap in minutes to restore proper filter positioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this ATRACYPART kit the right choice over single replacements?\u003c\/h3\u003e\n\u003cp\u003eBuying a multi-piece kit ensures you have matching caps for each standpipe, reducing the chance of mismatched colors or lost parts. The included grey cap covers the special Freshwater AG+ standpipe, so the set is ready for complete filter-top renewal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix caps provide full coverage for typical 5-standpipe setups plus the AG+ grey cap.\u003c\/li\u003e\n  \u003cli\u003eConsistent fit and finish across all pieces avoids uneven sealing or loose filters.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 12-month warranty for added purchase confidence.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a Hot Spring spa or a compatible tub using 3-1\/2\" standpipes — especially systems using the Freshwater AG+ 71325 silver-ion insert — this ATRACYPART 6-piece cap kit is for you. It’s ideal for owners replacing missing or damaged caps, shop technicians stocking replacement parts, and anyone maintaining clean, trouble-free circulation in their spa. The set keeps filters correctly positioned, protects pumps and plumbing from debris, and offers an easy, cost-effective way to restore proper filtration function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these caps compatible with the Freshwater AG+ 71325 system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a grey cap designed to fit the AG+ 71325 grey standpipe.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these caps without tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Generally yes; the caps screw on by hand and only need to be hand-tightened for a secure fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56831146656084,"sku":"B0D9Y79B1L","price":55.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-view-packaging.jpg?v=1787011980"},{"product_id":"atracypart-mower-deck-spindle-assembly-fits-exmark-quest-42-48-52-decks-corrosion-resistant-12-month-warranty","title":"ATRACYPART Mower Deck Spindle Assembly — Fits Exmark Quest 42\/48\/52 Decks, Corrosion-Resistant, 12-Month Warranty","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART Mower Deck Spindle Assembly is a direct-fit replacement for Exmark Quest 42\", 48\" and 52\" decks that restores smooth blade rotation and eliminates grinding noise.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a spindle wears, bends, or its bearings fail, your mower can vibrate, cut unevenly, or produce worrying grinding sounds. This ATRACYPART spindle assembly is built to match Exmark Quest deck specifications and replace OEM part numbers 116-5712, 116-3497, 109-8744, and 109-6394. Constructed from corrosion-resistant materials and backed by a 12-month warranty, it’s designed for durability and straightforward installation so you can get back to mowing quickly.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this spindle stop grinding noises?\u003c\/h3\u003e\n\u003cp\u003eGrinding usually comes from damaged bearings or a misaligned spindle shaft. Replacing the entire spindle assembly removes worn components and restores correct shaft alignment, which reduces metal-on-metal contact and vibration that cause grinding sounds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull assembly replaces worn bearings and seals\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined shaft reduces play and wobble\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish prevents premature wear\u003c\/li\u003e\n  \u003cli\u003eOEM-equivalent fit keeps pulley and blade alignment true\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this spindle improve cut quality and blade rotation?\u003c\/h3\u003e\n\u003cp\u003eA bent or loose spindle makes blades tilt or wobble, producing striping and uneven grass heights. Installing this replacement restores a stable, balanced rotation so blades stay parallel and cut consistently across the deck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBalanced assembly reduces blade wobble for a cleaner cut\u003c\/li\u003e\n  \u003cli\u003eProper bearing operation maintains even RPM under load\u003c\/li\u003e\n  \u003cli\u003eCompatible with Exmark Quest 42\/48\/52 decks to preserve deck geometry\u003c\/li\u003e\n  \u003cli\u003eHelps prevent premature blade and deck wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable performing basic mower maintenance. The spindle is a direct replacement for specific Exmark Quest decks and uses the same mounting pattern, so no modifications are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires standard hand tools: sockets, wrenches, and torque wrench\u003c\/li\u003e\n  \u003cli\u003eMounting holes match OEM spacing for a bolt-on swap\u003c\/li\u003e\n  \u003cli\u003eSimple pulley and blade reattachment after spindle replacement\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs and safety steps in your mower manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability features does this assembly include?\u003c\/h3\u003e\n\u003cp\u003eThis spindle is engineered for outdoor use, with materials and finishes chosen to resist rust and wear. Bearings and seals are specified to withstand mowing loads so the spindle continues to perform under regular use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant housing protects against moisture and debris\u003c\/li\u003e\n  \u003cli\u003eDurable bearings reduce heat and wear during heavy operation\u003c\/li\u003e\n  \u003cli\u003eSealed areas help keep grit out of working components\u003c\/li\u003e\n  \u003cli\u003eManufactured to replace OEM numbers for consistent reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Lawn care professionals, landscapers, and homeowners who own Exmark Quest 42\", 48\", or 52\" decks and need a dependable, OEM-matching spindle replacement. Choose this ATRACYPART assembly if you want a direct-fit solution to eliminate grinding, restore even blade rotation, and extend the life of your mower deck with a part backed by a 12-month warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spindle fit Exmark Quest 48-inch decks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits Exmark Quest 48\" decks including QST22BE482 and QST23KC482 and replaces listed OEM numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers the spindle assembly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The spindle assembly includes a 12-month warranty from ATRACYPART for defects and manufacturing issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56833849950548,"sku":"B0DLMSH2SR","price":106.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-spindle-assembly-front-view.jpg?v=1787044732"},{"product_id":"atracypart-mower-deck-spindle-replacement-for-ariens-gravely-59202600-heavy-duty-steel-direct-fit-for-48-52-60-decks","title":"ATRACYPART mower deck spindle replacement for Ariens \u0026 Gravely 59202600 — heavy-duty steel, direct-fit for 48\"\/52\"\/60\" decks","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART 59202600 is a heavy-duty mower deck spindle assembly designed as a direct replacement for select Ariens and Gravely decks, restoring stable blade rotation and reliable cutting performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis precision-engineered spindle fits a wide range of Ariens and Gravely models and replaces multiple OEM numbers, offering rugged steel construction, reduced vibration, and an easy install process. Whether you service commercial equipment or maintain a residential zero-turn, this spindle addresses wear and tear that causes uneven cuts and noisy operation. The unit is built for longevity and covered by a 2-year warranty.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ariens and Gravely mowers will this spindle fit?\u003c\/h3\u003e\n\u003cp\u003eThis spindle is compatible with many Ariens models including Apex, Max Zoom, Zoom, Zenith, and several Pro and Pro-Master series configurations across 48\", 52\" and 60\" decks. For Gravely, it fits ZT HD, Pro-Turn Z\/ZX, Pro-Stance, Pro-Master, Compact-Pro and several commercial series in multiple deck widths. Always verify your mower model and deck width before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAriens: Apex, Max Zoom\/Max Zoom HD, Zoom\/Zoom HD\/Zoom XL, Zenith, Pro, Pro-Master series\u003c\/li\u003e\n  \u003cli\u003eGravely: ZT HD, Pro-Turn Z\/ZX, Pro-Stance, Pro-Master, Compact-Pro, commercial models\u003c\/li\u003e\n  \u003cli\u003eDeck sizes covered: 44\"–60\" across listed model families (check model list)\u003c\/li\u003e\n  \u003cli\u003eConfirm OEM numbers listed to ensure exact fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is this replacement spindle?\u003c\/h3\u003e\n\u003cp\u003eConstructed from high-strength steel and precision machined, the spindle is engineered for heavy-duty use and long service life. The design minimizes wear and resists corrosion to keep blade rotation steady under load. Customers report improved stability and reduced vibration compared with worn original spindles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength steel body for wear resistance\u003c\/li\u003e\n  \u003cli\u003ePrecision machining for smooth rotation and reduced vibration\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish for extended life\u003c\/li\u003e\n  \u003cli\u003eBacked by a 2-year warranty for added confidence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install this spindle myself and will it be a direct replacement?\u003c\/h3\u003e\n\u003cp\u003eYes—this ATRACYPART spindle is designed as a direct-fit replacement that requires no modification for compatible models. Installation uses common hand tools and basic mechanical skills; many owners complete the swap in an afternoon. If you’re replacing worn bearings or a seized spindle, the assembly simplifies restoration of cutting performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for the OEM numbers listed—no machining needed\u003c\/li\u003e\n  \u003cli\u003eFits existing mounting and blade hardware in compatible decks\u003c\/li\u003e\n  \u003cli\u003eRequires standard tools: wrenches, sockets, torque wrench recommended\u003c\/li\u003e\n  \u003cli\u003eQuick swap reduces mower downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance improvements should I expect after replacement?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn spindle brings steadier blade speed, cleaner cuts, and less vibration transmitted to the deck and operator. That stability also reduces premature wear on belts and blades, helping maintain cut quality longer. While individual results vary by mower condition, the spindle restores designed geometry and rotational stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCleaner, more even lawn cuts due to stable blade rotation\u003c\/li\u003e\n  \u003cli\u003eReduced deck vibration for quieter operation\u003c\/li\u003e\n  \u003cli\u003eLess stress on belts and blades, extending component life\u003c\/li\u003e\n  \u003cli\u003eImproved safety margin with properly mounted blades\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ATRACYPART 59202600 spindle is aimed at homeowners, landscapers, and fleet technicians who need a dependable, direct-fit replacement for Ariens and Gravely zero-turn and commercial decks. It suits anyone repairing a deck with noisy, wobbling, or worn spindles who wants a durable, precision-engineered part that reinstates factory-like performance without custom modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with my Ariens or Gravely mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many Ariens and Gravely models listed; confirm your model and OEM part number before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required—standard wrenches and sockets suffice; basic mechanical skill recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56834191262036,"sku":"B0DM267JC5","price":101.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-assembly-spindle.jpg?v=1787047885"},{"product_id":"atracypart-mower-deck-spindle-for-60-zero-turn-mowers-compatible-with-oem-618-06076a-precision-machined-heavy-duty","title":"ATRACYPART Mower Deck Spindle for 60\" Zero-Turn Mowers — Compatible with OEM 618-06076A, Precision Machined, Heavy-Duty","description":"\u003cp\u003e\u003cstrong\u003eHigh-strength mower deck spindle engineered to replace OEM 618-06076 \/ 918-06076A and restore smooth, stable blade rotation on 60\" zero-turn mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Cub Cadet, MTD, Craftsman, Columbia or Troy-Bilt 60\" zero-turn is showing vibration, uneven cuts or excessive play at the deck, the spindle is a common wear point. This ATRACYPART replacement spindle is precision machined and built with durable materials to match original fit and function for many Z-Force, ZHD, Mustang XP and Craftsman models. It’s designed as a direct swap for the referenced OEM numbers so you can get back to efficient, even mowing without expensive dealer repairs.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models will this spindle fit?\u003c\/h3\u003e\n\u003cp\u003eThis spindle is intended for a wide range of 60\" zero-turn decks from leading brands. It covers many Cub Cadet Z-Force variants, several MTD\/Craftsman Z-series, Columbia ZHD decks and the Troy-Bilt Mustang XP.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCub Cadet: Z-Force SX60, S60, LX60, LE60, L60, LZ60, SZ60\u003c\/li\u003e\n  \u003cli\u003eMTD \/ Craftsman: Z8600, Z8200 series\u003c\/li\u003e\n  \u003cli\u003eColumbia: ZHD-S60, ZHD-L60\u003c\/li\u003e\n  \u003cli\u003eTroy-Bilt: Mustang XP 60\" decks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this spindle improve cutting performance?\u003c\/h3\u003e\n\u003cp\u003eThe spindle restores proper blade alignment and reduces wobble, resulting in a more uniform cut pattern and less stress on the deck and belts. With smoother rotation you’ll notice fewer missed strips, cleaner edges and reduced vibration transmitted through the mower.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-machined bearings for steadier blade spin\u003c\/li\u003e\n  \u003cli\u003eReduced vibration for improved deck stability\u003c\/li\u003e\n  \u003cli\u003eMore consistent blade-to-grass contact for even cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the ATRACYPART spindle durable and reliable?\u003c\/h3\u003e\n\u003cp\u003eBuilt from heavy-duty materials and finished to tight tolerances, this spindle is engineered to stand up to frequent use and typical mowing conditions. The construction reduces the likelihood of premature failure and helps extend the service life of your deck components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust housing designed for heavy-duty workloads\u003c\/li\u003e\n  \u003cli\u003eQuality bearings and seals to resist wear and contamination\u003c\/li\u003e\n  \u003cli\u003eOEM-equivalent dimensions to ensure correct loading and alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install this spindle myself and what should I check?\u003c\/h3\u003e\n\u003cp\u003eYes — this spindle is designed for straightforward replacement using common tools. Before installation, confirm the OEM part numbers and inspect the blade, belt and mounting hardware; replace any worn items to get the best result.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify compatibility with OEM numbers: 618-06076 \/ 618-06076A \/ 918-06076 \/ 918-06076A\u003c\/li\u003e\n  \u003cli\u003eInspect blades, belts, and mounting bolts; torque to manufacturer specs\u003c\/li\u003e\n  \u003cli\u003eUse proper safety procedures: disconnect spark and support deck securely\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Landscapers, homeowners with large properties, and maintenance technicians who need a dependable, OEM-compatible spindle for 60\" zero-turn decks will find this ATRACYPART replacement ideal. It’s targeted at anyone wanting to restore factory-level blade performance and reduce downtime with a durable, precision-fit component that works across many Cub Cadet, MTD, Craftsman, Columbia and Troy-Bilt models.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spindle replace part 618-06076A?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ATRACYPART spindle is a direct replacement for OEM 618-06076, 618-06076A, 918-06076 and 918-06076A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the spindle myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most users can install it with basic tools; always disconnect spark, support the deck, and follow torque specs for safe installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56834191360340,"sku":"B0DM25STB3","price":101.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-spindle-front-view_0bb8ba93-04dd-4cef-a919-ff41fccf3052.jpg?v=1787047888"},{"product_id":"atracypart-fuel-tank-for-john-deere-l100-series-direct-fit-gy21876-replacement-high-impact-plastic","title":"ATRACYPART Fuel Tank for John Deere L100 Series - Direct Fit GY21876 Replacement, High-Impact Plastic","description":"\u003cp\u003e\u003cstrong\u003eThis ATRACYPART GY21876 fuel tank is a direct-fit replacement for many John Deere L100-series and compatible lawn tractors, restoring reliable fuel storage and stopping leaks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower is showing fuel loss, visible cracks, or a soft, deformed filler neck, a worn gas tank is often the culprit. ATRACYPART designed this replacement to match the original tank's shape and mounting points while improving impact resistance with upgraded high-impact plastic. It’s made to accept the same hoses and caps as the factory unit and is listed as an OE alternative to GY21876, GY21102, and GY20894.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will this fuel tank fit?\u003c\/h3\u003e\n\u003cp\u003eThis tank fits a broad range of John Deere and compatible models across the 100-series and several Sabre and Scotts tractors. The listing includes specific model numbers so you can cross-reference your tractor before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacements for L100, L105, L110, L118, L120, L130 series and more.\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with 102–155C and 190C models and many LA\/D\/X 100-series tractors.\u003c\/li\u003e\n  \u003cli\u003eFits Sabre models 1642HS, 1742HS and Scotts L1742, L2048, L2548.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this tank improve durability and reduce leaks?\u003c\/h3\u003e\n\u003cp\u003eBuilt from reinforced high-impact plastic, the ATRACYPART tank resists cracking from vibration, accidental strikes, and environmental exposure. The material and molding process reduce stress points around the filler and mounting tabs so the tank maintains a leak-free seal longer than weathered OEM plastics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-impact polymer construction for better resistance to blows and stress.\u003c\/li\u003e\n  \u003cli\u003ePrecision-molded mounting points to match original tractor fittings.\u003c\/li\u003e\n  \u003cli\u003eFiller neck and outlet positioned like the OEM part for simple hose hookups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe fuel tank is supplied as a complete replacement piece ready to install; existing fuel lines, cap, and mounting hardware from your tractor can typically be reused. Basic hand tools and about 30–60 minutes are generally all that’s needed for removal and refit on most models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes as the replacement tank only — reuse your original cap and hoses unless damaged.\u003c\/li\u003e\n  \u003cli\u003eMounting holes and shape duplicate the OEM for a straightforward swap.\u003c\/li\u003e\n  \u003cli\u003eSimple installation: drain old tank, disconnect lines, unbolt, and install new tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does ATRACYPART provide?\u003c\/h3\u003e\n\u003cp\u003eATRACYPART backs this fuel tank with a 36-month warranty covering defects and premature failure under normal use. Customer support is available if you run into fitment questions or need a warranty replacement or refund.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e36-month limited warranty for peace of mind.\u003c\/li\u003e\n  \u003cli\u003eCustomer service through the seller for fitment help and claims.\u003c\/li\u003e\n  \u003cli\u003eOE references GY21876, GY21102, GY20894 included for part matching.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement fuel tank is intended for owners and service technicians of John Deere 100-series lawn tractors and compatible Sabre or Scotts models who need a durable, direct-fit tank to stop leaks and restore proper fuel storage. It’s ideal if you want an exact-shaped substitute that matches original mounting, avoids custom modifications, and is supported by a multi-year warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tank replace OEM part number GY21876?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ATRACYPART unit replaces GY21876 and is also listed to replace GY21102 and GY20894.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation hardware included with the tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The tank ships alone; existing caps, hoses, and bolts are typically reused unless damaged.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56834352742740,"sku":"B0BPFMKZX4","price":115.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-view-fuel-tank.jpg?v=1787049260"},{"product_id":"atracypart-593890-fuel-pump-module-for-kohler-command-ech-ecv-19-37hp-integrated-filter-direct-replacement","title":"ATRACYPART 593890 Fuel Pump Module for Kohler Command ECH\/ECV 19–37HP — Integrated Filter, Direct Replacement","description":"\u003cstrong\u003eHigh-quality replacement fuel pump module with integrated filter designed to restore reliable fuel delivery on Kohler Command EFI engines (ECH\/ECV series, 19–37HP).\u003c\/strong\u003e\n\n\u003cp\u003eThis ATRACYPART 593890 assembly replaces worn or failing OEM pump modules and includes a built-in filtration element to help protect the fuel system. It is engineered to fit a broad range of Kohler Command ECH and ECV engines, covering many common 19HP through 37HP models, and swaps in for several OE part numbers listed by Kohler.\u003c\/p\u003e\n\n\u003ch3\u003eWill this pump fit my Kohler Command engine?\u003c\/h3\u003e\n\u003cp\u003eCompatibility covers numerous ECH and ECV series engines across 19–37 horsepower. Check your engine model number against the supported list to confirm fitment because some older variants require different replacement part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits ECH\/ECV630, 650, 680, 730, 740, 749 ranges and ECV940\/980 models.\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for many OE numbers including 2539316-S, 2539314-S, 2539311-S, 2539310-S and 2539309-S.\u003c\/li\u003e\n  \u003cli\u003eNote: Certain older engine families may need alternate part numbers (e.g., 1975524-S, 2575574-S, 2575573-S) — verify against your exact model suffix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat problems does replacing the pump solve?\u003c\/h3\u003e\n\u003cpa\u003eInstalling a fresh pump module can resolve hard starting, intermittent stalls, and fuel delivery inconsistencies caused by a failing pump or clogged filter. Restoring proper pressure and flow helps the EFI system operate within its designed parameters.\n\u003cul\u003e\n  \u003cli\u003eEliminates low-pressure symptoms that lead to poor acceleration or rough idle.\u003c\/li\u003e\n  \u003cli\u003eIntegrated filter removes sediment and water that damage injectors and sensors.\u003c\/li\u003e\n  \u003cli\u003eReduces fuel consumption issues tied to poor delivery or leaks in the module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is the ATRACYPART module?\u003c\/h3\u003e\n\u003cp\u003eThe 593890 unit is manufactured with corrosion-resistant plastics and electrically robust components meant for long service life in outdoor power equipment. It incorporates a high-efficiency filter element and materials selected for chemical resistance to gasoline and common contaminants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction resists oil corrosion and typical environmental exposure.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in filter helps trap water, dirt, and particulates before they reach the pump or injectors.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 24-month warranty for replacement or refund if defects occur.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there installation tips or fitment adjustments I should know?\u003c\/h3\u003e\n\u003cp\u003eInstallation is generally straightforward and meant to be a direct swap on compatible models, but some older ECH engines may have plug-molding guides that interfere. If required, minor trimming of the guide edges can permit proper seating; follow safe workshop practices when making adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify engine model and suffix to select the correct replacement part number before ordering.\u003c\/li\u003e\n  \u003cli\u003eInspect electrical connectors and fuel lines for wear; replace brittle hoses or corroded terminals.\u003c\/li\u003e\n  \u003cli\u003eIf guide molding obstructs fit, carefully remove the interfering material and test fit before final assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ATRACYPART 593890 fuel pump module is intended for owners and technicians maintaining Kohler Command EFI small engines used in mowers, generators, and utility equipment who need a reliable, affordable OEM-equivalent replacement. It's especially useful for anyone troubleshooting hard starts, inconsistent engine performance, or contamination-related fuel system issues and who wants a drop-in solution with an integrated filter and a two-year warranty.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eReplacement coverage note:\u003c\/em\u003e This module supports a wide array of specific engine model numbers across ECH\/ECV series (for example ECH630, ECH650, ECH680, ECH730, ECH740, ECH749 and ECV630 through ECV980 families). Always match your full engine model code or consult your service manual to confirm the correct part number prior to installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 593890 replace Kohler part 2539316-S?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—593890 is compatible with OE numbers including 2539316-S; confirm your engine model to ensure proper fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers this fuel pump module?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: ATRACYPART provides a 24-month warranty offering replacement or refund for defective units.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003c\/pa\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56837647368532,"sku":"B0F2FCGLHF","price":85.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-593890-front-assembly.jpg?v=1787060467"},{"product_id":"atracypart-tail-wheel-caster-fork-for-bush-hog-rotary-cutter-oe-63740-replacement-powder-coated-steel-fits-4-5-6-decks","title":"ATRACYPART Tail Wheel Caster Fork for Bush Hog Rotary Cutter — OE#63740 Replacement, Powder-Coated Steel, Fits 4'\/5'\/6' Decks","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART heavy-duty tail wheel caster fork replaces OE# 63740 to restore stable rear support and smooth tracking on Bush Hog and compatible rotary cutters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn or broken tail wheel yoke causes steering wobble, uneven cutting, or difficulty towing your rotary cutter, this replacement caster fork brings the assembly back to OEM-style geometry. Built to match the common mounting dimensions for 4', 5', and 6' decks, the fork is machined and welded to resist bending, slips, and corrosion so you can get back to productive field work without fabricating parts.\u003c\/p\u003e\n\n\u003ch3\u003eWill this caster fork fit my Bush Hog or Brush Hog rotary cutter?\u003c\/h3\u003e\n\u003cp\u003eYes — this fork is made to the common fitment used on many Bush Hog and Brush Hog rear caster assemblies and also matches popular compatible brands. Confirm measurements and the original part number to ensure precise fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for OE# 63740\u003c\/li\u003e\n  \u003cli\u003eYoke diameter: 1-1\/4\" (31.75 mm)\u003c\/li\u003e\n  \u003cli\u003eAxle hole diameter: 3\/4\" (19.05 mm)\u003c\/li\u003e\n  \u003cli\u003eFork inside width approx. 5-5\/8\" (143 mm); usable yoke\/shank length ~6-1\/4\" (155 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the ATRACYPART fork improve durability and steering?\u003c\/h3\u003e\n\u003cp\u003eThis fork is fabricated from thick welded steel and finished with a corrosion-resistant powder coat to withstand impacts and moisture. The axle bore is precisely machined to reduce wobble, so the tail wheel tracks cleanly and steering feedback is more predictable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWelded construction for structural strength\u003c\/li\u003e\n  \u003cli\u003ePowder-coat finish for rust resistance\u003c\/li\u003e\n  \u003cli\u003eMachined axle bore for tighter fit and reduced play\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat models and deck sizes are compatible with this part?\u003c\/h3\u003e\n\u003cp\u003eThe fork fits standard rear caster mounts on Bush Hog rotary cutters and many cross-compatible brands used on small-to-medium agricultural mowers. It's commonly used on 4-foot, 5-foot, and 6-foot decks for field and pasture maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Bush Hog rotary cutters (4', 5', 6' decks)\u003c\/li\u003e\n  \u003cli\u003eCompatible with Brush Hog, Land Pride, Woods, King Kutter, Rhino, Alamo\u003c\/li\u003e\n  \u003cli\u003eDesigned to match OEM mounting holes—no welding or modification required in typical installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone with basic hand tools: unbolt the old yoke and bolt in the replacement fork. Before purchasing, verify your mower’s part number and confirm the yoke and axle dimensions to avoid fitment surprises.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove old caster yoke and install with existing bolts\u003c\/li\u003e\n  \u003cli\u003eMeasure yoke diameter and axle bore to confirm match\u003c\/li\u003e\n  \u003cli\u003eNo welding or fabrication usually required—direct bolt-in replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: operators and owners of Bush Hog and similarly equipped rotary cutters who need a rugged, ready-to-install replacement for a damaged or worn tail caster yoke. If you maintain 4', 5', or 6' decks and want an OEM-dimensioned fork with corrosion protection and precise axle fit, this ATRACYPART unit is intended for you. Backed by a 12-month warranty, the part is suitable for farm equipment repair shops, maintenance crews, and DIY owners replacing OE# 63740-style rear caster forks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this part replace OE# 63740?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ATRACYPART caster fork is a direct replacement for OE# 63740 when measurements match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty does the caster fork include?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The fork includes a 12-month warranty against defects, with replacement or refund options.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56838475612500,"sku":"B0FG6LLM87","price":125.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-view-caster-fork.jpg?v=1787062776"},{"product_id":"atracypart-inline-leaf-catcher-canister-for-pool-vacuum-fits-hayward-w560-clear-double-layer-basket-with-5-skimmer-socks","title":"ATRACYPART Inline Leaf Catcher Canister for Pool Vacuum — Fits Hayward W560, Clear Double-Layer Basket with 5 Skimmer Socks","description":"\u003cb\u003eATRACYPART Inline Leaf Catcher Canister is an add-on leaf trap that fits between your vacuum hose and pump to capture leaves and debris before they reach the filter basket.\u003c\/b\u003e\n\n\u003cp\u003eKeep your pool pump running smoothly and reduce frequent filter-basket cleaning with this extra-large inline leaf canister engineered for home pool vacuums. Built with a transparent outer shell, a white inner basket, and a double-layer design, it traps both large leaves and finer fragments while maintaining steady water flow. The kit includes one leaf canister and five skimmer socks to catch very small debris, and it’s designed for quick attachment to common pool vacuum hoses including the Hayward W560 PoolVac Navigator Standard.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this canister protect my pump and filter?\u003c\/h3\u003e\n\u003cp\u003eThe inline canister intercepts debris ahead of the pump, reducing the volume of leaves and twigs that reach the pump filter basket. By catching material upstream, it minimizes clogs and extends the time between manual cleanings. Its double-layer design separates larger debris from smaller fragments, which helps maintain consistent flow to the pump.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-layer basket traps large and small debris separately.\u003c\/li\u003e\n  \u003cli\u003eExtra-large collection chamber reduces how often you empty the basket.\u003c\/li\u003e\n  \u003cli\u003eFits inline with vacuum hose to stop debris before the pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes installation and maintenance simple?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: shut off the circulation system, disconnect the vacuum hose, and attach the canister between hose segments. The top unscrews and the white sealing layer lifts out for quick access to the inner basket. Cleaning takes only a few minutes—lift the basket, empty debris, rinse, and reassemble.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwist-off blue top for fast access without tools.\u003c\/li\u003e\n  \u003cli\u003eClear outer shell lets you see when the basket needs emptying.\u003c\/li\u003e\n  \u003cli\u003eIncludes 5 skimmer socks for trapping fine fragments inside the basket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with my Hayward W560 or other pool vacuums?\u003c\/h3\u003e\n\u003cp\u003eYes—the product is engineered for compatibility with the Hayward W560 PoolVac Navigator Standard and connects easily to most pool cleaner vacuum hoses. Its common hose fittings and universal inline design make it adaptable for many residential pool vacuum setups. If you have unusual hose diameters, an adapter may be required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to pair with Hayward W560 and similar vacuums.\u003c\/li\u003e\n  \u003cli\u003eUniversal hose connections for quick, secure fit.\u003c\/li\u003e\n  \u003cli\u003eCompact profile that won’t restrict normal vacuum flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool owners or maintenance professionals who want to reduce pump-basket clogs, cut down on filter cleaning frequency, and protect their circulation system will find this canister valuable. It’s ideal for backyard pools with regular leaf fall or where twigs and small debris are common. Installers who prefer visible debris monitoring and fast serviceability will appreciate the transparent housing and twist-off access. ATRACYPART provides a durable, easy-to-use inline solution with extra skimmer socks to boost fine-particle capture and make routine pool upkeep quicker and less messy.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFeatures: optimal water flow, efficient debris trapping, quick maintenance, universal compatibility, durable construction.\u003c\/li\u003e\n  \u003cli\u003ePackage: 1 inline leaf canister + 5 skimmer socks.\u003c\/li\u003e\n  \u003cli\u003eSafety: always turn off the pool circulation system before disconnecting hoses or servicing the canister.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I empty the leaf canister?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Empty when the visible basket is half to three-quarters full or after heavy leaf fall seasons to maintain flow.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the skimmer socks with the inner basket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Place a skimmer sock inside the inner basket to catch finer fragments that the basket mesh may miss.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56839012090196,"sku":"B0FFB6SPHV","price":104.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-canister.jpg?v=1787064603"},{"product_id":"atracypart-mower-deck-spindle-for-exmark-lazer-z-48-72in-decks-7-5-height-heavy-duty-steel","title":"ATRACYPART Mower Deck Spindle for Exmark Lazer Z 48–72in Decks — 7.5\" Height, Heavy-Duty Steel","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART 109-6917 is a direct-replacement mower deck spindle engineered to restore smooth blade rotation on Exmark Lazer Z series zero-turn mowers with 48\"–72\" decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn or damaged spindle causes vibration, noise, or uneven cutting, replacing it with a properly sized, heavy-duty unit brings your deck back to stable operation. This spindle (also referenced as 109-2102, 109-0764, 810CSP2287N) matches the factory mounting pattern and overall height to fit many Lazer Z AS, DS, XS and X-series models. It’s precision machined from high-strength steel to resist wear and maintain alignment under load, helping blades cut cleaner and reducing downtime for repairs.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Exmark models and deck sizes will this spindle fit?\u003c\/h3\u003e\n\n\u003cp\u003eThis spindle is compatible with a broad selection of Exmark Lazer Z machines across several series. Check your model code and deck width against the list below to confirm fit before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLazer Z AS: LZAS29KA604LP (60\" and 72\" decks)\u003c\/li\u003e\n  \u003cli\u003eLazer Z DS: LZDS902K605 (60\"), LZDS902K725 (72\")\u003c\/li\u003e\n  \u003cli\u003eLazer Z XS: multiple 60\", 66\" and 72\" variants including LXS25KD605 and LXS35BV725\u003c\/li\u003e\n  \u003cli\u003eLazer Z X-Series: models such as LZX23KC486 (48\"), LZX740EKC526 (52\"), and many 60\"\/72\" versions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the spindle’s key dimensions and mounting details?\u003c\/h3\u003e\n\n\u003cp\u003eKnowing the spindle height and hole spacing avoids ordering the wrong part. This unit matches common Exmark deck geometry so it aligns with blades and pulleys when installed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOverall height: 7 1\/2\" (191.5 mm)\u003c\/li\u003e\n  \u003cli\u003eMounting hole center-to-center distance: 6 1\/2\" (165 mm)\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers: 109-6917, 109-2102, 109-0764, 810CSP2287N\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this spindle improve cutting performance and durability?\u003c\/h3\u003e\n\n\u003cp\u003eBetter spindle alignment reduces blade wobble and vibration, which directly affects cut quality and component life. This spindle’s materials and machining are chosen to hold tolerances under heavy use, helping blades maintain a steady rotation and produce a more uniform finish.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrecision-machined shaft for smoother blade rotation\u003c\/li\u003e\n  \u003cli\u003eHigh-strength steel construction for wear and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eReduces vibration to extend blade, belt, and bearing life\u003c\/li\u003e\n  \u003cli\u003eHelps maintain even cut patterns across the deck\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward and what should I prepare?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be user-friendly for owners comfortable with basic mower maintenance. The spindle uses the same mounting footprint as the referenced OEM parts, which simplifies swap-out when bearings, blades, or pulleys are already removed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRequires common hand tools and basic mechanical skills\u003c\/li\u003e\n  \u003cli\u003eSwap bearings, seals, and pulleys as needed during service\u003c\/li\u003e\n  \u003cli\u003eVerify deck alignment and belt routing after installation\u003c\/li\u003e\n  \u003cli\u003eAllow time to torque fasteners to manufacturer specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Lawn care professionals, property managers, and DIY owners who operate Exmark Lazer Z AS\/DS\/XS\/X-series zero-turn mowers and need a reliable replacement spindle will benefit most. Choose this ATRACYPART spindle when you want a precisely machined, heavy-duty replacement that matches OEM geometry and restores cutting performance across 48\"–72\" decks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spindle replace part number 109-2102?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. ATRACYPART 109-6917 replaces OEM numbers 109-2102, 109-0764, 810CSP2287N and 109-6917.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it fit my Exmark Lazer Z 60\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your model is listed for 60\" decks (AS, DS, XS or X-series variants shown), this spindle is compatible.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56839131693396,"sku":"B0DM262S16","price":126.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-spindle-front-view_be368670-67b4-49f0-ac6d-59c0880e57e7.jpg?v=1787065314"},{"product_id":"atracypart-pool-filter-lid-for-pentair-clean-clear-cc75-cc150-cc200-predator-uv-resistant-leak-proof-replacement","title":"ATRACYPART Pool Filter Lid for Pentair Clean \u0026 Clear CC75\/CC150\/CC200 \u0026 Predator - UV-Resistant, Leak-Proof Replacement","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART replacement pool filter lid restores a secure, leak-resistant closure for Pentair Clean \u0026amp; Clear CC75\/CC150\/CC200 and Predator cartridge and D.E. filters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pool filter lid is cracked, warped, or no longer seals properly, swapping in a robust replacement can quickly improve filter performance and reduce water loss. This ATRACYPART lid is manufactured from weather-resistant materials designed to resist UV damage and heavy chlorination, and it replaces Pentair part numbers 178561, 160317, 160318, and 178555. Designed for easy, tool-free installation, the lid helps keep your filter system operating at peak efficiency with minimal downtime.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this lid affect my pool’s filtration performance?\u003c\/h3\u003e\n\u003cp\u003eA solid lid maintains the correct internal pressure and prevents bypass around the cartridge or D.E. elements, so the filter can capture debris as intended. Replacing a damaged lid restores reliable flow and helps produce clearer water while reducing strain on the pump.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinstates a tight, leak-proof seal to maintain proper operating pressure\u003c\/li\u003e\n  \u003cli\u003eReduces debris bypass that causes cloudy water and extra maintenance\u003c\/li\u003e\n  \u003cli\u003eHelps preserve cartridge\/D.E. element life by ensuring consistent filtration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation — will I need special tools or expertise?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward for homeowners and service techs alike: most users can swap the lid in minutes without special tools. The lid aligns with existing mounting points and seals using the supplied gasket area so you can get back to regular pool use quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick fit to Pentair Clean \u0026amp; Clear CC75\/CC150\/CC200 and Predator filters\u003c\/li\u003e\n  \u003cli\u003eNo specialized tools required for standard replacements\u003c\/li\u003e\n  \u003cli\u003eStep-by-step alignment with factory bolt or clamp locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protections does the ATRACYPART lid offer?\u003c\/h3\u003e\n\u003cp\u003eThe replacement lid is molded from durable, UV-resistant polymers formulated to resist oxidation and damage from pool chemicals. That construction ensures the lid remains dimensionally stable over seasons of sun, heat, and chlorinated water.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV-resistant plastics to prevent sun-related cracking and fading\u003c\/li\u003e\n  \u003cli\u003eChemical-tolerant material to withstand heavy chlorination\u003c\/li\u003e\n  \u003cli\u003eRobust build to resist impacts and routine wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this lid fit my existing Pentair filter models?\u003c\/h3\u003e\n\u003cp\u003eThis ATRACYPART lid is compatible with Pentair Clean \u0026amp; Clear and Predator cartridge filters and with Pentair Easy Clean D.E. filters; it replaces OEM part numbers 178561, 160317, 160318, and 178555. Always verify your model before purchase to confirm fitment and ensure proper sealing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Clean \u0026amp; Clear CC75, CC150, CC200 and Predator cartridge filters\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for Pentair Easy Clean pool and spa D.E. filters\u003c\/li\u003e\n  \u003cli\u003eReplaces listed Pentair part numbers for direct swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Pool owners and service professionals who need a reliable, long-lasting lid to replace cracked or leaking Pentair filter covers. If you want a quick, cost-effective fix that restores filtration efficiency and reduces maintenance, this ATRACYPART replacement lid is a practical upgrade. Backed by a 12-month warranty and built to withstand UV exposure and heavy chlorination, it’s suitable for residential and light-commercial pools where dependable sealing and easy installation are priorities.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this lid fit my Pentair CC150 filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ATRACYPART lid is compatible with Pentair Clean \u0026amp; Clear CC150 and replaces part numbers 178561, 160317, 160318, and 178555.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is any special tool required to install the replacement lid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are needed; most homeowners can install the lid quickly using existing clamps or bolts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56839397179732,"sku":"B0DCZD9JJW","price":140.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-view-pentair-filter-lid.jpg?v=1787066583"},{"product_id":"atracypart-lawn-mower-deck-spindle-assembly-for-exmark-radius-e-s-series-44-60-oem-fit-sealed-bearings","title":"ATRACYPART Lawn Mower Deck Spindle Assembly for Exmark Radius E \u0026 S-Series 44\"–60\" — OEM-fit, Sealed Bearings","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART 126-4630 is a direct-fit lawn mower deck spindle assembly built to restore smooth blade rotation and reduce vibration on Exmark Radius E and S-Series 44\"–60\" decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Exmark mower is showing uneven cuts, excessive deck vibration, or grinding noises, a worn spindle assembly is often the cause. This ATRACYPART replacement is engineered to match OEM dimensions and bearing performance so you can return your deck to factory-like operation quickly and without alteration.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this spindle assembly improve cutting quality?\u003c\/h3\u003e\n\u003cp\u003eReplacing a damaged or worn spindle stops blade wobble and keeps blades rotating on their intended axis. That steadier rotation creates a more uniform cutting plane across the deck, reducing striping and missed grass blades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-sealed bearings maintain concentric blade rotation.\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty housing resists flex that causes uneven cuts.\u003c\/li\u003e\n  \u003cli\u003eBalanced spindle shaft minimizes vibration at mowing speeds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my Exmark Radius E or S-Series mower deck?\u003c\/h3\u003e\n\u003cp\u003eYes — this assembly is manufactured to be a direct OEM replacement for part number 126-4630. It is compatible with Exmark Radius E-Series decks in 44\", 48\", 52\" and 60\" sizes and Radius S-Series decks in 48\", 52\" and 60\" sizes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact OEM part number match: 126-4630.\u003c\/li\u003e\n  \u003cli\u003eFits multiple Exmark deck widths for straightforward replacement.\u003c\/li\u003e\n  \u003cli\u003eNo modification required; installs using existing mounting points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the ATRACYPART spindle under heavy use?\u003c\/h3\u003e\n\u003cp\u003eThis spindle assembly uses a rugged steel housing and precision-machined bearings designed for tough mowing conditions. The sealed bearing design helps keep dirt and moisture out, extending life between services.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-gauge steel housing for impact and torsion resistance.\u003c\/li\u003e\n  \u003cli\u003ePrecision bearings engineered for high-speed rotation.\u003c\/li\u003e\n  \u003cli\u003eSealed construction to limit contamination and wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and warranty support comes with the part?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is built for low maintenance but benefits from periodic inspection and proper blade balance. ATRACYPART backs this product with a 12-month warranty to replace or support the unit should defects appear under normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty with customer support.\u003c\/li\u003e\n  \u003cli\u003eInspect bearings and mounting hardware after initial break-in hours.\u003c\/li\u003e\n  \u003cli\u003eReplace blades and belts as recommended to reduce spindle stress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: the ATRACYPART 126-4630 deck spindle assembly is intended for Exmark owners, small landscaping businesses, and maintenance technicians who need a reliable OEM-fit replacement to recover cutting performance quickly. It suits users who prefer a durable, low-maintenance spindle engineered for high-speed mowing on 44\"–60\" Radius E and S-Series decks and want a backed product with warranty support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this spindle an exact replacement for Exmark part 126-4630?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. ATRACYPART 126-4630 is manufactured as a direct OEM-fit replacement for Exmark part number 126-4630.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers this spindle assembly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The spindle assembly includes a 12-month warranty with replacement or support for manufacturing defects under normal use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56840598028628,"sku":"B0FKBJNYJT","price":119.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-view-spindle-assembly_a1998e36-f230-44b7-9c23-d2561a8a2d42.jpg?v=1787072091"},{"product_id":"atracypart-50-inch-deck-spindle-assembly-3-pack-for-cub-cadet-mtd-craftsman-troy-bilt-heavy-duty-with-mounting-bolts","title":"ATRACYPART 50-Inch Deck Spindle Assembly 3-Pack for Cub Cadet\/MTD\/Craftsman\/Troy-Bilt - Heavy-Duty with Mounting Bolts","description":"\u003cp\u003e\u003cstrong\u003eHigh-strength ATRACYPART 50-inch deck spindle assembly replaces worn spindles on Cub Cadet, Craftsman and Troy-Bilt ZT\/Z Mustang models to restore smooth, quiet cutting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your zero-turn or lawn tractor is showing grinding sounds, wobbling blades or uneven cuts, the spindle is often the culprit. This 3-pack spindle kit is engineered to match the OEM fit of 50-inch decks (replacing part numbers 618-09256 and 618P09256) and arrives with the necessary mounting bolts and threads for straightforward installation. Built from heavy-duty materials, the assembly is intended to handle regular residential and demanding landscaping use while minimizing downtime.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this spindle assembly solve my mower's noise and vibration problems?\u003c\/h3\u003e\n\u003cp\u003eWorn bearings and bent spindle housings create friction and imbalance that show up as grinding noises and blade wobble. Replacing the defective spindle with a properly machined assembly eliminates play and restores bearing seating, reducing vibration and noise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces damaged bearings and bent spindles to stop grinding sounds.\u003c\/li\u003e\n  \u003cli\u003ePrecision fit reduces blade wobble for a straighter cut.\u003c\/li\u003e\n  \u003cli\u003eMachined surfaces restore correct alignment and reduce deck wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Cub Cadet, Craftsman, or Troy-Bilt 50-inch deck?\u003c\/h3\u003e\n\u003cp\u003eThe spindle kit is designed specifically for 50-inch decks and lists direct compatibility with several popular models. Verify your model number against the fit list and OEM part numbers to confirm match before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Cub Cadet ZT1-50 and ZT2-50 models.\u003c\/li\u003e\n  \u003cli\u003eFits Craftsman Z5600 (17ARFACQ093) and Z5650 (17ARFACQ091).\u003c\/li\u003e\n  \u003cli\u003eWorks with Troy-Bilt Mustang Z50 (17ARFACQA66) and replaces OEM 618-09256 \/ 618P09256.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eThis kit is supplied with the essential mounting bolts and threaded fittings to simplify replacement. Basic hand tools and a safe lifting method for the mower deck are required; many DIYers with mechanical experience can complete the swap in a few hours.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes as a 3-pack to replace multiple spindles at once.\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting bolts and matching threads for a secure fit.\u003c\/li\u003e\n  \u003cli\u003eRequires common tools: wrenches, sockets, jack or lift, and torque wrench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability can I expect from this spindle?\u003c\/h3\u003e\n\u003cp\u003eConstructed from high-strength materials, the spindle is intended for continuous use in residential and light-commercial mowing. It restores cutting consistency and resists premature wear when installed and maintained properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty construction suited for high-traffic mowing environments.\u003c\/li\u003e\n  \u003cli\u003eDesigned to extend the service life of the mower's deck components.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 12-month warranty for buyer assurance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This ATRACYPART 50-inch spindle assembly is aimed at homeowners, landscapers, and maintenance professionals who need an OEM-compatible, cost-effective repair for 50-inch deck mowers. It’s ideal if you own a compatible Cub Cadet, Craftsman, or Troy-Bilt mower and want to replace noisy or damaged spindles without sending the mower to a shop. Choose the 3-pack if you prefer to refresh multiple spindle points at once and reduce future service visits.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spindle replace OEM part 618-09256?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ATRACYPART spindle kit replaces OEM numbers 618-09256 and 618P09256 for 50-inch decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation hardware included with the spindles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 3-pack includes the necessary mounting bolts and threads to install the spindles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56842017472852,"sku":"B0DLNR9HWJ","price":177.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-view-spindle-assembly_da411a4d-bcac-4d78-b4f9-81f269271b54.jpg?v=1787076376"},{"product_id":"atracypart-mower-deck-spindle-assembly-for-54-61-72-decks-heavy-duty-steel-precision-bearings-2-year-warranty","title":"ATRACYPART Mower Deck Spindle Assembly for 54\/61\/72 Decks — Heavy-Duty Steel, Precision Bearings, 2-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eThe ATRACYPART 437-0005-00 is a heavy-duty replacement mower deck spindle assembly engineered to restore smooth, stable blade rotation for 54\", 61\" and 72\" Spartan mower decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn spindle causes vibration, noisy operation, or uneven cutting, swapping in a robust replacement is the fastest way to get your mower back to reliable performance. This spindle assembly is manufactured from high-grade steel and precision bearings to withstand heavy use and provide a direct-fit replacement for specified Spartan RT, RT Pro, RT HD, SRT, SRT XD, SRT XDe, RZ and RZ Pro models. It’s sold with a two-year warranty and built to return deck stability and consistent blade speed without modifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this spindle improve mower performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a degraded spindle removes wobble, reduces blade imbalance, and eliminates grinding sounds that indicate bearing failure. The result is a more even cut, less stress on deck components, and quieter operation while you mow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM 437-0005-00 to restore specified factory geometry.\u003c\/li\u003e\n  \u003cli\u003ePrecision bearings deliver smoother blade rotation and less vibration.\u003c\/li\u003e\n  \u003cli\u003eHigh-grade steel housing resists bending under load.\u003c\/li\u003e\n  \u003cli\u003eReduces noise from worn or failing spindle assemblies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my Spartan mower deck?\u003c\/h3\u003e\n\u003cp\u003eThis spindle is designed as a direct replacement for a range of Spartan models and deck sizes; check model year compatibility before purchase. It fits 54\", 61\" and 72\" decks across RT, RT Pro, RT HD, SRT, SRT XD, SRT XDe, RZ and RZ Pro series as listed in the product details.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2016–2019 RT and 2020–2022 RT Pro\/RT HD models.\u003c\/li\u003e\n  \u003cli\u003eFits SRT series models from 2016–2022 including XD and XDe variants.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2019–2020 RZ and RZ Pro, plus 2020 RZ Pro entries.\u003c\/li\u003e\n  \u003cli\u003eDesigned to replace OEM spindle number 437-0005-00 for correct alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is engineered for a direct-fit swap so most homeowners or technicians can install it without modifying the deck. Typical installation requires common hand tools and basic mechanical knowledge; always follow your mower’s service manual for torque specs and safety steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design avoids drilling or welding.\u003c\/li\u003e\n  \u003cli\u003eRequires standard sockets, wrenches, and possibly a torque wrench for final fasteners.\u003c\/li\u003e\n  \u003cli\u003eReplace blades and check belt alignment while access to the spindle is available.\u003c\/li\u003e\n  \u003cli\u003eFollow safety procedures: disconnect spark plug and secure deck before work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and warranty protections are provided?\u003c\/h3\u003e\n\u003cp\u003eThe spindle assembly is built from premium materials to endure tough mowing conditions and reduce the need for frequent replacements. ATRACYPART supports the product with a two-year warranty and customer support to address fitment or performance questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty steel construction for resistance to bending and impact.\u003c\/li\u003e\n  \u003cli\u003eQuality sealed bearings to limit contamination and extend life.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 2-year limited warranty and responsive support.\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet heavy-use residential and light commercial demands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This spindle assembly is intended for homeowners, landscaping professionals, and service shops maintaining Spartan mower decks that require a reliable, direct-fit replacement. If you need to eliminate deck wobble, noisy bearings, or uneven cuts on 54\", 61\" or 72\" decks and prefer a heavy-duty part with a two-year warranty, this ATRACYPART spindle is a practical choice to restore consistent cutting performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spindle replace OEM 437-0005-00?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ATRACYPART spindle is a direct replacement for OEM 437-0005-00 for the listed Spartan models and deck sizes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the spindle covered by a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The product includes a two-year warranty and access to customer support for fitment or performance issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56843007197524,"sku":"B0F5WGK4KK","price":120.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-spindle-front-view_658b4844-56be-4573-b93c-aa801456a929.jpg?v=1787077794"},{"product_id":"atracypart-lawn-mower-deck-spindle-assembly-for-spartan-rz-series-oem-437-0006-00-fit-aluminum-housing-sealed-bearings","title":"ATRACYPART Lawn Mower Deck Spindle Assembly for Spartan RZ Series — OEM 437-0006-00 Fit, Aluminum Housing \u0026 Sealed Bearings","description":"\u003cp\u003e\u003cstrong\u003eHigh-strength ATRACYPART deck spindle assembly engineered to restore smooth blade rotation and reduce vibration in Spartan RZ, RZ Pro, RZ HD, and RZ Tuff Torq mowers (fits OEM 437-0006-00).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Spartan mower has started producing uneven cuts, excessive noise, or blade wobble, replacing the deck spindle often returns the deck to normal operation. This ATRACYPART spindle is built with an aluminum housing and precision bearings for reliable performance and long service life. It’s a direct-fit replacement for common OEM numbers and designed for straightforward swap-in installation without custom modifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this spindle improve my mower’s cutting quality?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn spindle restores true blade alignment and steady rotation, which translates to a cleaner, more consistent cut across the deck. The precision bearings reduce play and prevent blade wobble that causes striping or missed patches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision bearings reduce lateral movement for uniform blade contact.\u003c\/li\u003e\n  \u003cli\u003eAluminum housing resists corrosion and maintains straightness under load.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit for specified Spartan models ensures correct blade height and alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part stop grinding noises and vibration?\u003c\/h3\u003e\n\u003cp\u003eYes—upgraded bearings and a snug spindle fit minimize the vibration that produces grinding sounds and transfers stress to belts and deck components. Quieter operation also reduces wear on neighboring parts, helping avoid further repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality bearings lower friction and audible noise.\u003c\/li\u003e\n  \u003cli\u003eTighter tolerances reduce vibration that causes fastener loosening.\u003c\/li\u003e\n  \u003cli\u003eLess deck stress prolongs belt and pulley life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and does it require modifications?\u003c\/h3\u003e\n\u003cp\u003eThe ATRACYPART assembly is made as a direct replacement for OEM part numbers including 437-0006-00, so no drilling or welding is necessary. Most users can swap the unit using common hand tools; follow safety steps like blade removal and proper torque settings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for Spartan RZ, RZ Pro, RZ HD, and RZ Tuff Torq models listed.\u003c\/li\u003e\n  \u003cli\u003eStandard hardware and bolt pattern match OEM locations.\u003c\/li\u003e\n  \u003cli\u003eBasic mechanic skills and commonly available tools are usually sufficient.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protections does this spindle offer?\u003c\/h3\u003e\n\u003cp\u003eThe housing is machined from durable aluminum to balance strength and weight, plus it resists rust better than untreated steel. Combined with sealed, precision bearings, the assembly is engineered to withstand routine mowing stresses and deliver consistent performance season after season.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength aluminum housing for corrosion resistance and rigidity.\u003c\/li\u003e\n  \u003cli\u003eSealed precision bearings to keep out debris and retain lubricant.\u003c\/li\u003e\n  \u003cli\u003eOEM-compatible dimensions to maintain original deck geometry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ATRACYPART 437-0006-00 spindle assembly is intended for owners and technicians of Spartan RZ-series riding mowers (2017–2022), RZ Pro (2019–2022), RZ HD (2020–2022), and RZ Tuff Torq (2019) who need a reliable, direct-fit replacement to fix uneven cutting, vibration, or grinding noises. It’s a practical option for DIY maintenance or shop repairs and comes with a 12-month warranty and customer support if issues arise.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Spartan mowers does this spindle fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Spartan RZ 2017–2022, RZ Tuff Torq 2019, RZ Pro 2019–2022, and RZ HD 2020–2022.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the spindle come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the part includes a 12-month warranty and customer support.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":56844340756820,"sku":"B0FH1Z68JP","price":121.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1063\/2652\/4244\/files\/atracypart-front-view-deck-spindle.jpg?v=1787085377"}],"url":"https:\/\/gardenluxe.co.uk\/collections\/brand-atracypart.oembed","provider":"Gardenluxe Uk","version":"1.0","type":"link"}